Mimaki JV33-130 Mimaki JV33-160 Service Manual and Parts List Manual

Service Manual and Parts List Manual Mimaki JV33-130 Mimaki JV33-160;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Mimaki.
You can print, zoom or read any diagram, picture or page from this full manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Mimaki JV33-130 Mimaki JV33-160. You can find easily everything what do you need.
To see what contain, please read table of contents:

Content for Service Manual:
Outline of Maintenance
1-1. Precautions in Maintenance
1-1-1. Notes on repair
1-1-2. Preliminary checks
1-2. Tools required for maintenance work
1-2-1. Tools to be used at disassembly and reassembly
1-2-2. Adjustment tools
1-3. Specifications of the main unit

Operation Principle and Functions
2-1. Operation Principle
2-1-1. Sequence at Power-on
2-1-2. Origin Point Detection
2-1-3. Set Up
2-1-4. Media Detection
2-1-5. Sequence of Maintenance Function
2-1-6. Ink System
2-2. Functions
2-2-1. ADJUST Function
2-2-2. TEST Function
2-2-3. Special Key Function
2-2-4. PARAMETER Function
2-3. Operation Flow
2-3-1. Outline
2-3-2. SETUP
2-3-3. MAINTENANCE
2-3-4. MACHINE SET
2-3-5. COMMON SETUP
2-3-6. INFORMATION
2-3-7. ADJUST
2-3-8. TEST
2-3-9. PARAMETER

Overhaul / Adjustment
3-1. Outline
3-1-1. Precautions for disassembly and reassembly
3-1-2. Tools and jigs
3-2. Overhaul of Covers
3-3. Overhaul of Ink-related Parts
3-3-1. Head Unit
3-3-2. Pump Motor
3-3-3. Capping Assembly
3-3-4. Major Parts for Washing Cartridge Assembly
3-4. Overhaul of PCBs
3-4-1. Main PCB
3-4-2. Station PCB
3-5. Overhaul of Sensors
3-6. Overhaul of Driving Parts
3-6-1. X-axis Motor
3-6-2. Y-axis Motor
3-6-3. Y-axis Drive Pulley
3-6-4. Y Drive Belt
3-6-5. Wiper Unit
3-7. Overhaul of Other Parts
3-7-1. Cutter Unit Assembly
3-7-2. Linear scale
3-7-3. Adjustment of the station height

Troubleshooting
4-1. Outline
4-1-1. Rough identification of the source of the trouble
4-1-2. Checking procedure
4-2. Troubles for which error messages are displayed
4-2-1. Error messages and corrective measures
4-2-2. Warning messages and corrective measures

Explanation of Electrical Parts
5-1. Outline
5-1-1. Operation Explanation
5-1-2. Power Supply
5-2. Circuit Board Specifications
5-2-1. Main PCB
5-2-2. PRAM PCB
5-2-3. Station PCB
5-2-4. X-axis motor relay PCB
5-2-5. Ink slider PCB
5-2-6. Keyboard PCB
5-2-7. Encoder PCB
5-2-8. Take-up PCB
5-2-9. Head memory PCB
5-2-10. LED PCB
5-3. Electronic block diagram
5-3-1. Connection diagram inside main unit
5-3-2. Connection diagram outside main unit

____________________

Content for Parts List Manual:
COVER ASSY. -1/4
COVER ASSY. -2/4
COVER ASSY. -3/4
COVER ASSY. -4/4
LEG ASSY. (Type 1)
LEG ASSY. (Type 2)
FRAME ASSY. -1/4
FRAME ASSY. -2/4
FRAME ASSY. -3/4 (Type 1)
FRAME ASSY. -3/4 (Type 2)
FRAME ASSY. -4/4
CLAMP ASSY. -1/2
CLAMP ASSY. -2/2
X DRIVE ASSY
Y DRIVE ASSY. -1/2
Y DRIVE ASSY. -2/2
BEAR ASSY
INK SLIDER PCB
STATION ASSY. -1/2 (Type 1)
STATION ASSY. -1/2 (Type 2)
STATION ASSY. -2/2
CAP BASE ASSY
WIPER ASSY
WASTE INK TANK ASSY
HEAD ASSY. -1/4
HEAD ASSY. -2/4
HEAD ASSY. -3/4
HEAD ASSY. -4/4
ELECTRICAL UNIT ASSY. -1/2
ELECTRICAL UNIT ASSY. -2/2
PLATEN ASSY. -1/3
PLATEN ASSY. -2/3
PLATEN ASSY. -3/3
CARTRIDGE BRACKET ASSY
CARTRIDGE ASSY
X-AXIS MOTOR RELAY PCB
CLEANING CARTRIDGE -1/2
CLEANING CARTRIDGE -2/2
TAKE-UP DEVICE ASSY. -1/2 (Type 1)
TAKE-UP DEVICE ASSY. -1/2 (Type 2)
TAKE-UP DEVICE ASSY. -2/2
ROLL ASSY.-1/2
ROLL ASSY.-2/2 (Type 1)
ROLL ASSY.-2/2 (Type 2)
DRY FAN ASSY
EXHAUST DEVICE ASSY
INK PATH PIPEWORK
CHANGE TRACKING