Canon iPF700 Service Manual & Parts List

Service Manual & Parts List Canon imagePROGRAF iPF700;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Canon imagePROGRAF iPF700.
You can print, zoom or read any diagram, picture or page from this Service Manual & Parts List. Every chapter on this manual is fully detailed and contain all theĀ  simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Canon imagePROGRAF iPF700. You can find easily everything what do you need.
To see what contain, please read table of contents:

Content SERVICE MANUAL Canon imagePROGRAF iPF700:
Chapter 1. PRODUCT DESCRIPTION
1.1 Product Overview
1.1.1 Product Overview
1.2 Features
1.2.1 Features
1.2.2 Printhead
1.2.3 Ink tanks
1.2.4 Cutter unit
1.2.5 Roll holder
1.2.6 Stand
1.2.7 Expendables
1.3 Product Specifications
1.3.1 Product Specifications
1.4 Detailed Specifications
1.4.1 Print speeds and print directions
1.4.2 Interface specifications
1.5 Names and Functions of Components
1.5.1 Printer front panel
1.5.2 Printer rear panel
1.5.3 Carriage
1.6 Basic Operation
1.6.1 Operation panel
1.6.2 Printer state transitions
1.6.3 Main menu
1.7 Safety and Precautions
1.7.1 Safety Precautions
1.7.1.1 Moving parts of the printer
1.7.1.2 Ink adhesion
1.7.1.3 Live parts of the printer
1.7.2 Other Precautions
1.7.2.1 Printhead
1.7.2.2 Ink tanks
1.7.2.3 Dealing with the printer
1.7.3 Precautions When Servicing Printer
1.7.3.1 Tips on data stored in the printer
1.7.3.2 Confirming the Firmware Version
1.7.3.3 Precautions against Static Electricity
1.7.3.4 Precautions for Disassembly/Reassembly
1.7.3.5 Self-diagnostic Feature
1.7.3.6 Disposing of the Lithium Battery

Chapter 2. TECHNICAL REFERENCE
2.1 Basic Operation Outline
2.1.1 Printer Diagram
2.1.2 Print Driving
2.2 Firmware
2.2.1 Operation Sequence at Power-on
2.2.2 Operation Sequence at Power-off
2.2.3 Print Control
2.2.4 Print Position Adjustment Function
2.2.5 Head Management
2.2.6 Printhead Overheating Protection Control
2.2.7 Pause between Pages
2.2.8 White Raster Skip
2.2.9 Sleep Mode
2.3 Printer Mechanical System
2.3.1 Outline
2.3.1.1 Outline
2.3.2 Ink Passage
2.3.2.1 Ink Passage
2.3.2.2 Ink Tank Unit
2.3.2.3 Carriage Unit
2.3.2.4 Printhead
2.3.2.5 Purge Unit
2.3.2.6 Maintenance Cartridge
2.3.2.7 Air Flow
2.3.3 Paper Path
2.3.3.1 Outline
2.3.3.2 Paper Path
2.3.3.3 Cutter Unit
2.4 Printer Electrical System
2.4.1 Outline
2.4.1.1 Overview
2.4.2 Main Controller
2.4.2.1 Main controller components
2.4.3 Carriage Relay PCB
2.4.3.1 Carriage relay PCB components
2.4.4 Head Relay PCB
2.4.4.1 Head relay PCB components
2.4.5 Maintenance Cartridge Relay PCB
2.4.5.1 Maintenance cartridge relay PCB components
2.4.6 Power Supply
2.4.6.1 Power supply block diagram
2.5 Detection Functions with Sensors
2.5.1 Sensers for covers
2.5.2 Ink passage system
2.5.3 Carriage system
2.5.4 Paper path system

Chapter 3. INSTALLATION
3.1 Transporting the Printer
3.1.1 Transporting the Printer
3.1.1.1 Transporting the Printer
3.1.2 Reinstalling the Printer
3.1.2.1 Reinstalling the Printer

Chapter 4. DISASSEMBLY/REASSEMBLY
4.1 Service Parts
4.1.1 Service Parts
4.2 Disassembly/Reassembly
4.2.1 Disassembly/Reassembly
4.3 Points to Note on Disassembly and Reassembly
4.3.1 Note on locations prohibited from disassembly
4.3.2 Manual carriage movement
4.3.3 Units required for draining the ink
4.3.4 Outer covers
4.3.5 Waste ink box
4.3.6 Driving unit
4.3.7 Ink tube unit
4.3.8 Carriage unit
4.3.9 Feeder unit
4.3.10 Purge unit
4.3.11 Ink tank unit
4.3.12 Head management sensor
4.3.13 multi sensor
4.3.14 PCBs
4.3.15 Opening the Caps and Moving the Wiper Unit
4.3.16 Opening/Closing the Ink Supply Valve
4.3.17 Draining the Ink
4.4 Applying the Grease
4.4.1 Applying The Grease
4.5 Adjustment and Setup Items
4.5.1 Procedure after Replacing the Feed Roller HP Sensor or Feed Roller Encoder
4.5.2 Procedure after Replacing the Carriage Unit or Multi Sensor
4.5.3 Procedure after Replacing the Head Management Sensor

Chapter 5. MAINTENANCE
5.1 Periodic Replacement Parts
5.1.1 Periodic Replacement Parts
5.2 Consumable Parts
5.2.1 Consumable Parts
5.3 Periodic Maintenance
5.3.1 Periodic Maintenance

Chapter 6. TROUBLESHOOTING
6.1 Troubleshooting
6.1.1 Outline
6.1.1.1 Outline of Troubleshooting
6.1.2 Troubleshooting by the Phenomenon
6.1.2.1 Incorrect Value Check Value
6.1.2.2 Load roll
6.1.2.3 Load sheets. /Remove sheets
6.1.2.4 Open Ink Tank Cover
6.1.2.5 The printer cannot be turned on
6.1.2.6 The printer is shut down during power-on or printing
6.1.2.7 The printer cannot be connected over the network
6.1.2.8 Printing error (Ink remains.)
6.1.2.9 Other printing errors
6.1.3 Troubleshooting When Warnings Occur
6.1.3.1 Ink Level: Check(1000/1001/1002/1003/1006/1007)
6.1.3.2 Check maint cartridge capacity.(1100)
6.1.3.3 End of paper feed. Cannot feed paper more. (100F)
6.1.3.4 GARO W12xx (xx: Digits) (1221,1222,1223,1225,1231,1232,1233,1234,1235)
6.1.4 Troubleshooting When Errors Occur
6.1.4.1 03010000-200C/03010000-2017/03010000-2018/03016000-2010 Multi sensor error
6.1.4.2 03010000-200D Cut media end error
6.1.4.3 03010000-2016 Paper feed/delivery jam error
6.1.4.4 03010000-2820/03010000-2821/03010000-2822/03010000-2823/03010000-2F33/031300312F32 Adjustment error
6.1.4.5 03010000-2E1F/03060000-2E14/03060A00-2E00/03061000-2E15/03860002-2E02/03860002-2E0A/03860002-2E0C Path mismatch error
6.1.4.6 03030000-2E21 IEEE1394 Error
6.1.4.7 03031000-2E0F Upper cover sensor error
6.1.4.8 03031000-2E11 Carriage cover sensor error
6.1.4.9 03031000-2E12 Defective paper release lever
6.1.4.10 03060A00-2E1B Roll media end error
6.1.4.11 03130031-260E Gap detection error
6.1.4.12 03130031-260F Gap adjustment error
6.1.4.13 03130031-2F13 A/D Converter external trigger output stopped
6.1.4.14 03130031-2F14 ASIC Register cannot be written
6.1.4.15 03130031-2F16 Mist fan error
6.1.4.16 03130031-2F17 Suction fan error
6.1.4.17 03130031-2F20/03130031-22/03130031-2F23/03130031-2F28/03130031-2F2D Defective sensor in purge unit
6.1.4.18 03130031-2F25 Carriage home position error
6.1.4.19 03130031-2F26/03130031-2F27 Carriage motor error
6.1.4.20 03130031-2F2A Feed roller home position error
6.1.4.21 03130031-2F3A valve open/close error
6.1.4.22 03800200-2802/03800400-2803/03800300-2801 Printhead error
6.1.4.23 03800500-280C Defective printhead nozzle
6.1.4.24 03800500-2F2F/03800500-2F30 Head management sensor error
6.1.4.25 03810101-2501/03810102-2502/03810103-2503/03810104-2500/03810106-2506/03810106-2507 No ink error
6.1.4.26 03810201-2581/03810202-2582/03810203-2583/03810204-2580/03810206-2586/03810206-2587 Tank level error 1
6.1.4.27 03810201-2591/03810202-2592/03810203-2593/03810204-2590/03810206-2596/03810206-2597 Tank level error 2
6.1.4.28 03830101-2521/03830102-2522/03830103-2523/03830104-2520/03830106-2526/03830105-2527 Ink tank is not installed
(This error occurs when the ink tank is replaced.)
6.1.4.29 03830201-2541/03830202-2542/03830203-2543/03800204-2540/03830206-2546/03830206-2547 Invalid ink tank ID
6.1.4.30 03830301-2561/03830302-2562/03830303-2563/03830304-2560/03830306-2566/03830306-2567 Ink tank EEPROM error
6.1.4.31 03841001-2819/03841001-281B/03841101-2818/03841201-2816/03841201-2817 Maintenance cartridge error
6.1.4.32 03861001-2405/03861001-2406 Borderless printing error
6.1.4.33 03862000-2E09 Insufficient roll media error
6.1.4.34 03870001-2015 Cutter error
6.1.4.35 03900001-4042/03900001-4049 Firmware error
6.1.4.36 E194-4034 Sensor calibration error
6.1.5 Troubleshooting When Service Call Errors Occur
6.1.5.1 E141-4046 Recovery system’s rotation count reached 50,000
6.1.5.2 E144-4047 Supply system’s count error
6.1.5.3 E146-4001 Borderless/idle ejection/mist collection count full
6.1.5.4 E161-403E Abnormally high head temperature
6.1.5.5 E194-404A Non-discharge detection count error
6.1.5.6 E196-4040/E196-4041/E196-4042/E196-4043/E196-4044/E196-4045 Main controller PCB error
6.1.5.7 E198-401C/E198-401D/E198-401E RTC error
6.2 Location of Connectors and Pin Arrangement
6.2.1 Main controller PCB
6.2.2 Carriage relay PCB
6.2.3 Head relay PCB
6.3 Version Up
6.3.1 Firmware Update Tool
6.4 Service Tools
6.4.1 List of Tools
6.4.2 Using the Cover Switch Tool

Chapter 7. SERVICE MODE
7.1 Service Mode
7.1.1 Service Mode
7.1.2 Service Mode Map
7.1.3 Details of Service Mode
7.2 Special Mode
7.2.1 Special Modes for Servicing

Chapter 8. ERROR CODE
8.1 Outline
8.1.1 Outline
8.2 Warning Table
8.2.1 Warnings
8.3 Error Table
8.3.1 Error Code List
8.4 Sevice Call Table
8.4.1 Service call errors

—————————-

Content PARTS CATALOG Canon iPF700 iPF710 iPF720:
PRINTER & ACCESSORIES
COVERS (1)
COVERS (2)
ELECTRICAL PART
INK TANK & PURGE UNIT
CARRIAGE UNIT
FEED MOTOR ASS’Y
AIR FLOW FAN UNIT
PINCH ROLLER UNIT
PLATEN & FEED ROLLER
LINEAR SCALE
TOOL
STAND UNIT

Number of pages: 212.