Canon iR1435, iR1430 Series, Service Manual

Service Manual Canon imageRUNNER 1435, imageRUNNER 1430 Series;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Canon imageRUNNER.
You can print, zoom or read any diagram, picture or page from this Service Manual. Every chapter on this manual is fully detailed and contain all theĀ  simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Canon imageRUNNER 1435, imageRUNNER 1430 Series photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

0. SAFETY PRECAUTIONS
Laser Safety
Handling of Laser System
Turn Power Switch ON
Power Supply
Safety of Toner
About Toner
Toner on Clothing or Skin
Notes when Handling the Lithium and Ni-MH Batteries
Notes before it Works Serving
Points to Note at Cleaning
Notes on Assembly / Disassembly
Points to Note when Tightening a Screw

1. PRODUCT OVERVIEW
Product Lineup
Host machine
Option
Feature
Product feature
Specifications
Product Specifications
Productivity (Print speed)
imageRUNNER 1435
imageRUNNER 1430
Paper Type
Pickup
Name of Parts
External View
ADF Model
Copyboard Model
Printer Model
Cross Sectional View
Control Panel
Power Switch
Description of Control Panel
Control Panel

2. TECHNOLOGY
Basic Configuration
Functional Configuration
Basic Sequence
Basic Operation Sequence
Original Exposure and Feed System
Construction
Specifications / Controls / Functions
Main Configuration Parts
Basic Operation
Basic Sequence
ADF Operation Mode
Overview
Controls
Reader Unit
ADF Unit
Pickup Control
Feed Control
Original Reverse Control
Delivery Control
Original Detection
Dust Detection Control
Image Processing
Outline
CIS Unit
Main Controller PCB
Jam Detection
Service Tasks
Periodically Replaced Parts
Consumable Parts
Periodical Servicing
Actions when Replacing the Parts
Main Controller
Overview
Configuration / Function
Main controller PCB
Laser Control System
Overview
Outline
Specifications / Controls / Functions
Main Configuration Parts
Controls
Control System Configuration
Laser Lighting Timing Control
BD signal
Light Intensity Control
Laser Scanner Motor Control
Laser OFF Control
Service Task
Periodically Replacing Parts
Consumable Parts
Periodical Servicing
Action when replacing parts
Image Formation System
Construction
Specifications / Controls / Functions
Main Configuration Parts
Image Formation Process
Basic Sequence
Controls
Drum Unit
Developing Assembly
Transfer Unit
Service Tasks
Periodically Replaced Parts
Consumable Parts
List of Periodical Services
Actions when Replacing the Parts
Fixing System
Overview
Features
Specifications / Controls / Functions
Main Configuration Parts
Controls
Fixing Temperature Control
Print Temperature Control
Down Sequence Control
User Mode Related to Fixing Grade
Paper Loop Amount Control before Fixing
Protection Features
Work of Service
Periodically Replaced Parts
Consumable Parts
List of Periodical Servicing
Actions when Replacing the Parts
Pickup / Feed System
Overview
Specifications / Controls / Functions
Parts Configuration
Diagram of Paper Paths
Controls
Pickup Block
Cassette Pickup Assembly
Multi-Purpose Pickup Assembly
Fixing/Registration Assembly
Duplex/Delivery Assembly
JAM Detection
Work of Service
Periodically Replaced Parts
Consumable Parts
List of Periodical Servicing
Actions when Replacing the Parts
External Auxiliary System
Controls
Software Counter
Fan
Power
Power-Saving Mode
Work of Service
Periodically Replaced Parts
Consumable Parts
List of Periodical Servicing
Actions when Replacing the Parts
Embedded RDS
Product Overview
Overview
Features and benefits
Major Functions
Limitations
Service Mode Menu Transmission Function
Service cautions
E-RDS Setup
Confirmation and preparation in advance
Steps to E-RDS settings
Initializing E-RDS settings
Report output procedure
FAQ
Troubleshooting
Error code and strings
Setting Information Export/Import Function (DCM)
Function Overview
Purpose for Using the Function
Combination of Information Exported/Imported by DCM, Means, and Storage Locations
Compatibility
Specifications
Specifications Related to DCM Files
Specifications Related to Department ID Management
Specifications during Execution of a Process
Process after Import
Specifications Related to Address Books
Limitations
Job Control
Control Characters
Corrective Processing
Power Supply Control
Sleep Operation during a Process
Procedure for Exporting/Importing Service Mode Setting Information
Procedure for Export/Import Using the Control Panel (Service Mode)
Procedure for Export/Import Using Remote UI (Service Mode)
Procedure for Export/Import Using Remote UI ([System Management Settings] Menu)
List of Items Which Can Be Imported
Settings/Registration Basic Information
System Management Settings
Preferences
Service Mode Settings

3. PERIODIC SERVICE
Periodical Service Operation Item
Periodically Replaced Parts
Consumable Parts
List of Periodical Servicing
Cleaning

4. PARTS REPLACEMENT AND CLEANING
Parts List
External / Internal Cover
Front
Rear
Main Unit
Main Unit
PCB
Solenoid
Motor
Sensor
Fan
Switch
Clutch
Others
External Cover/Interior System
Removing the Front Cover Unit
Procedure
Removing the Rear Cover
Procedure
Removing the Right Cover
Preparation
Procedure
Removing the Front Upper Cover
Preparation
Procedure
Removing the Left Front Cover
Preparation
Procedure
Removing the Left Rear Cover
Preparation
Procedure
Removing the Front Right Cover
Preparation
Procedure
Removing the Delivery Tray
Preparation
Procedure
Removing the Control Panel Unit
Preparation
Procedure
Removing the Feeder Cover
Procedure
Removing the ADF Rear Cover
Procedure
Removing the Document Tray
Procedure
Original Exposure and Feed System (Reader)
Layout
Removing the Scanner Unit
Preparation
Procedure
Removing the Copyboard Glass Unit
Procedure
Adjustment after Replacement
Cleaning the Copyboard Glass Unit
Preparation
Procedure
Cleaning the Stream Reading Glass
Preparation
Procedure
Removing the CIS Unit
Preparation
Procedure
Adjustment after Replacement
Original Exposure and Feed System (ADF)
Layout
Removing the ADF Unit
Preparation
Procedure
Adjustment after Replacement
Removing the ADF Pickup Unit
Procedure
Cleaning the ADF Pickup Unit
Procedure
Removing the ADF Separation Pad
Procedure
Cleaning the ADF Separation Pad
Preparation
Procedure
Removing the ADF Pickup Feed Unit
Preparation
Procedure
Removing the ADF Feed Drive Unit
Preparation
Procedure
Cleaning the ADF Delivery Roller
Preparation
Procedure
Controller System
Removing the Main Controller PCB
Preparation
Procedure
After Replacing the Main Controller PCB
Removing the Engine Controller PCB
Preparation
Procedure
After Replacing the Engine Controller PCB
Removing the Power Supply PCB
Preparation
Procedure
Removing the HVT PCB
Preparation
Procedure
Removing the Control Panel PCB
Preparation
Procedure
Laser Exposure System
Removing the Laser Scanner Unit
Preparation
Procedure
Image Formation System
Removing the Toner Cartridge
Procedure
Removing the Drum Unit
Procedure
Remove the Developing Assembly
Preparation
Procedure
Adjustment after Replacement
Removing the Developing Cylinder
Preparation
Procedure
Removing the Transfer Roller
Procedure
Removing the Separation Static Charge Eliminator
Preparation
Procedure
Cleaning the Transfer Guide
Procedure
Fixing System
Removing the Fixing Assembly
Preparation
Procedure
Remove the Fixing Film Unit
Preparation
Procedure
Removing the Pressure Roller
Preparation
Procedure
Cleaning the Fixing Inlet Guide
Preparation
Procedure
Pickup/Feed System
Removing the Left Door Unit
Preparation
Procedure
Removing the Multi-purpose Tray
Preparation
Procedure
Remove the Multi-purpose Tray Pickup Unit
Preparation
Procedure
Removing the Main Drive Unit
Preparation
Procedure
Removing the Fixing Drive Unit
Preparation
Procedure
Removing the Delivery/Reverse Unit
Preparation
Procedure
Removing the Cassette 1 Pickup Roller
Procedure
Removing the Cassette 1 Feed Roller
Procedure
Installation of the Cassette 1 Feed Roller Unit
Removing the Cassette 1 Separation Roller
Preparation
Procedure
Installation of the Cassette 1 Separation Roller
Removing the Registration Roller
Preparation
Procedure
Removing the Multi-purpose Tray Pickup Roller
Preparation
Procedure
Removing the Multi-purpose Tray Separation Pad
Preparation
Procedure
Removing the Duplex Roller
Procedure
Removing the Delivery Reverse Roller
Preparation
Procedure
Removing the Multi-purpose Tray Vertical Path Roller
Preparation
Procedure

5. ADJUSTMENT
Basic Adjustment
Adjustment when Replacing the Parts
Adjustment of Image Position
Pickup Feed System
Original Exposure and Feed System (Reader Unit)
Original Exposure and Feed System (ADF Unit)
Actions when Replacing Parts
Original Exposure and Feed System (Reader Unit)
Actions when Replacing the CIS Unit
Actions when Replacing the Copyboard Glass Unit
Original Exposure and Feed System (ADF)
Actions when Replacing the ADF Unit
Main Controller PCB
Actions when Replacing the Main Controller PCB
Engine Controller PCB
Actions when Replacing the Engine Controller PCB
Adjustment of Image Position
Pickup/ Feed System
Adjustment of Image Leading Edge Margin (front side)
Adjustment of Image Leading Edge Margin (back side)
Adjustment of Left Edge Margin of the Image (front side)
Adjustment of Left Edge Margin of the Image (back side)
Original Exposure and Feed System (Reader Unit)
Adjustment of Image Leading Edge Margin (1-sided)
Adjustment of Left Edge Margin of the Image (1-side)
Original Exposure and Feed System (ADF Unit)
Adjustment of Image Leading Edge Margin (1-sided)
Adjustment of Image Leading Edge Margin (front side)
Adjustment of Image Leading Edge Margin (back side)
Adjustment of Left Edge Margin of the Image (front side)
Adjustment of Left Edge Margin of the Image (back side)
Adjustment of Magnification Ratio (front side)
Adjustment of Magnification Ratio (back side)

6. TROUBLESHOOTING
Initial Check
Initial Check Item List
Each Unit / Function System Check Item List
Test Print
Overview
Select the Test Print TYPE
Procedure
How to View the Test Print
Grid (TYPE = 0)
Halftone (TYPE = 1)
Solid black (TYPE = 2)
Solid white (TYPE = 3)
17 gradations (TYPE = 4)
Troubleshooting Items
Troubleshooting Items
Image Failure
Edge Dirt
Feed Failure
Irregular pitch (94mm) of the drum unit
Operation Failure
Large Curl
Special mode (User mode)
Debug Log
Overview
Function Overview
Conditions for collecting logs
Collection procedure
Version Upgrade
Overview
Upgrading by UST
System Requirements
Preparation
Downloading System Software
Upgrading via Internet
Preparation
Procedure
Messages

7. ERROR CODE
Overview
Outline
Error Code
Error Code
Jam Code
Jam Type
Main Unit (including Cassette Feeding Module-AC1)
Alarm Code
Alarm Code

8. SERVICE MODE
Outline
Outline of Service Mode
Back Up of Service Mode
Service Mode Structure
Screen Flow of Service Mode
Caution when Changing the Setting Value
Remote UI Service Mode
Function Overview
Operating Condition
Usage Method
COPIER
DISPLAY
MISC
CCD
VERSION
USER
ERR
JAM
ADJUST
ADJ-XY
CCD
IMG-REG
PASCAL
FEED-ADJ
HV-PRI
DEVELOP
CST-ADJ
BLANK
FUNCTION
CCD
MISC-P
MISC-R
VIFFNC
SPLMAN
INSTALL
CLEAR
SYSTEM
OPTION
BODY
FNC-SW
CUSTOM
DSPLY-SW
CLEANING
IMG-FIX
IMG-LSR
IMG-TR
USER
ENV-SET
ACC
LCNS-TR
LCNS-OF
COUNTER
DRBL-1
DRBL-2
LF
TOTAL
PICK-UP
FEEDER
JAM
I/O
R-CON
FEEDER
ADJUST
DOCST
LA-SPD
DOCST2
DOCST-R
LA-SPD2
DOCSTDUP
FUNCTION
MTR-ON
FEED-ON
FEED-CHK
TESTMODE
PRINT
FAX
MODEM
FACULTY
FAX
List of SSSW
List of MENU
List of NUM
List of NCU
TONE
PULSE
DIAL TONE
2nd DLTN
BUSTONE0
BUSTONE1
REORDRTN
MULTI
AUTO RX
CNGDTCT
SPECIALB
SPECIALN
RKEY
PBXDIALT
PBXBUSYT

9. INSTALLATION
How to Utilize This Installation Procedure
Symbols in the Illustration
Illustrations Used in This Procedure
Checking before Installation
Selecting the Site of Installation
Points to Note on Installation
Unpacking
Unpacking the Machine and Removing the Packaging Materials
Checking the Contents
Installation Procedure
Affixing the Label
ADF Model only (Except for China / Korea)
Connecting the Power Cord
Turning ON the Power
Host Machine Settings (Start Setup Guide)
Checking the Operation and the Print Image
Connecting to the Network (Network Model only)
Connecting to Telephone Line (Fax Model only)
Preparation of Telephone Cord
Basic Setting
Fax communication test
Copy Card Reader-F1
Check Item of the Contents
Points to Note on Installation
Check Items when Turning OFF the Power
Installation Outline Drawing
Checking the Contents
Copy Card Reader-F1
Copy Card Reader Attachment-E1
Installation Procedure
Assembling the Card Reader
Removing the Covers
Installing the Card Reader Unit
Setting After Installation
Control Interface Kit-C1
Checking the Contents
Check Items when Turning OFF the Main Power
Installation Outline Drawing
Installation Procedure
Handset-K1
Points to Note on Installation
Checking the Contents
Check Items when Turning OFF the Main Power
Installation Outline Drawing
Installation Procedure

APPENDIX
Service Tools
Special Tools
Oils and Solvents
General Circuit Diagram
General Circuit Diagram
General Timing Chart
Basic sequence at printing from cassette 1 ( A4, 2-sided, 1 sheet )
Backup Data
Soft Counter Specifications
Soft counter specifications

Number of pages: 355.