Canon iRC6800, iRC5800, iRC6870U, iRC5870U, Service Manual & Parts List

Service Manual & Parts List Canon imageRUNNER C6800, imageRUNNER C5800, imageRUNNER C6870U, imageRUNNER C5870U;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Canon.
You can print, zoom or read any diagram, picture or page from this Service Manual & Parts List. Every chapter on this manual is fully detailed and contain all theĀ  simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Canon photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

Content for SERVICE MANUAL:
Chapter 1. INTRODUCTION
1.1 System Construction for iR C6800/iR C5800
1.1.1 System Configuration with Pickup/Delivery Accessories
1.1.2 System Configuration with Printing/Transmission Accessories
1.1.3 Functions of Printing/Transmitting Accessories
1.2 System Construction for iR C6870U/iR C5870U
1.2.1 System Configuration with Pickup/Delivery Accessories
1.2.2 System Configuration with Printing/Transmission Accessories
1.2.3 Functions of Printing/Transmitting Accessories
1.3 Product Specifications
1.3.1 Names of Parts
1.3.1.1 External View
1.3.1.2 Cross Section
1.3.2 Using the Machine
1.3.2.1 Turning On the Power Switch
1.3.2.2 Points to Note About Turing Off the Main Power Switch
1.3.2.3 Points to Note About Turing Off the Main Power Switch
1.3.2.4 Control Panel
1.3.3 User Mode Items
1.3.3.1 Common Settings
1.3.3.2 Setting the Timers
1.3.3.3 Adjustment and Cleaning
1.3.3.4 Report
1.3.3.5 System Control Settings
1.3.3.6 Copier Settings
1.3.3.7 Common Transmission Settings
1.3.3.8 Box Settings
1.3.3.9 Printer Settings
1.3.3.10 Address Book Settings
1.3.4 User Mode Items
1.3.4.1 Common Settings
1.3.4.2 Timer Settings
1.3.4.3 Adjustment and Cleaning
1.3.4.4 Report Settings
1.3.4.5 System Settings
1.3.4.6 Copy Settings
1.3.4.7 Communications Settings
1.3.4.8 Mail Box Settings
1.3.4.9 Printer Settings
1.3.4.10 Address Book Settings
1.3.5 User Maintenance
1.3.5.1 Cleaning
1.3.5.2 Inspection
1.3.6 Safety
1.3.6.1 Safety of the Laser Light
1.3.6.2 Regulations by the us Center for Devices and Radiological Health
1.3.6.3 Handling the Laser Unit
1.3.6.4 Safety of Toner
1.3.7 Product Specifications
1.3.7.1 iR C6800/iR C5800 Specifications
1.3.7.2 iR C6870U/iR C5870U Specifications
1.3.8 Function List
1.3.8.1 Print Speed
1.3.8.2 Paper Type
1.3.8.3 Accessories
1.3.9 RDS Specification
1.3.9.1 Embedded RDS(e-RDS)

Chapter 2. INSTALLATION
2.1 Making Pre-Checks
2.1.1 Selecting the Site of Installation
2.1.2 Installation Environment
2.1.3 Checking the Contents
2.2 Unpacking and Installation
2.2.1 Before Starting the Work
2.2.2 Turning Off the Host Machine
2.2.3 Unpacking the Machine
2.2.4 Attaching the Pickup Assembly
2.2.5 Attaching the Scanner System
2.2.6 Locking the Primary Transfer Roller in Place
2.2.7 Before Attaching the Developing Assembly
2.2.8 Attaching the Color Developing Assemblies
2.2.9 Attaching the Black Developing Assembly
2.2.10 Attaching the Process Unit
2.2.11 Attaching the Fixing Assembly
2.2.12 Fitting the Black Toner Bottle
2.2.13 Checking the Environment Switch
2.2.14 Turning On the Main Power Switch
2.2.15 Setting Up the Paper Cassette
2.2.16 Changing the Deck Paper Size (right, left)
2.2.17 Fitting the Color Toner Cartridge
2.2.18 Supplying Black Toner
2.2.19 Cleaning the Intermediate Transfer Belt
2.2.20 Supplying Color Toner
2.2.21 Setting Auto Gradation Correction
2.2.22 Checking the Image/Operation
2.2.23 Adjusting the Horizontal Registration
2.2.24 Adjusting the Leading Edge Registration
2.2.25 Securing the Machine in Place
2.2.26 If Not Connected to a Network
2.3 Checking the Connection to the Network
2.3.1 Overview
2.3.2 Using the PING Utility
2.3.3 Using a Remote Host Address
2.4 Troubleshooting the Network
2.4.1 Overview
2.4.2 Checking the Connection of the Network Cable
2.4.3 Using a Loopback Address
2.4.4 Using a Local Host Address
2.5 Relocating the Machine
2.5.1 Relocating the Machine
2.6 Installing the Card Reader
2.6.1 Points to Note About Installation
2.6.2 Checking the Contents
2.6.3 Installation
2.6.4 Using the Card Reader in Combination with NetSpot Accountant (hereafter, NSA)
2.7 Installing the Original Tray
2.7.1 Checking the Contents
2.7.2 Attachment
2.8 Installing the Key Switch Unit-A1
2.8.1 Checking the Contents
2.8.2 Attachment
2.9 Installing the Voice Guidance Kit
2.9.1 Checking Items in the Package
2.9.2 Turning Off the Host Machine
2.9.3 Installation Procedure

Chapter 3. BASIC OPERATION
3.1 Construction
3.1.1 Functional Construction
3.1.2 Arrangement of the Major PCBs
3.1.3 Arrangement of the Major PCBs
3.1.4 DC Controller
3.2 Basic Sequence
3.2.1 Basic Sequence of Operation at Power-On
3.2.2 Basic Sequence of Control During Printing (full-color)
3.2.3 Basic Sequence of Operation During Printing (mono color)

Chapter 4. MAIN CONTROLLER
4.1 Construction
4.1.1 Functional Construction
4.1.2 Functional Construction
4.2 Construction of the Electrical Circuitry
4.2.1 Main Controller PCB (main)
4.2.2 Main Controller PCB (main)
4.2.3 Main Controller PCB (sub)
4.2.4 Expansion Bus PCB
4.2.5 SRAM PCB
4.2.6 SRAM PCB
4.2.7 HDD
4.3 Start-Up Sequence
4.3.1 Overview
4.3.2 Start-Up Sequence
4.4 Start-Up Sequence
4.4.1 Overview
4.4.2 Start-Up Sequence
4.5 Actions when HDD Error
4.5.1 E602 in Detail
4.5.2 E602 in Detail
4.5.3 E609 in Detail
4.6 Image Processing
4.6.1 Overview of the Flow of Image Data
4.6.2 Construction of Image Processing Modules
4.6.3 Reader Input Image Processing
4.6.4 Compression, Decompression, and Edit Processing Blocks
4.6.5 Printer Output Image Processing
4.7 Image Processing
4.7.1 Overview of the Flow of Image Data
4.7.2 Construction of the Image Processing Modules
4.7.3 Reader Input Image Processing
4.7.4 Compression/Decompression and Editing Blocks
4.7.5 Printer Output Image Processing
4.8 Flow of Image Data
4.8.1 Flow of Image Data (copier function)
4.8.2 Flow of Image Data (Box function)
4.8.3 Flow of Image Data (SEND function)
4.8.4 Flow of Image Data (fax transmission)
4.8.5 Image Data Flow for Fax Reception Functions
4.8.6 Flow of Image Data (PDL function)
4.9 Flow of Image Data
4.9.1 Flow of Image Data for Copier Functions
4.9.2 Flow of Image Data for Box Functions
4.9.3 Flow of Image Data for SEND Functions
4.9.4 Flow of Image Data for Fax Transmission Functions
4.9.5 Flow of Image Data for Fax Reception Functions
4.9.6 Flow of Image Data for PDL Functions
4.10 Parts Replacement Procedure
4.10.1 Controller Box
4.10.2 Controller Box
4.10.3 Main Controller PCB (main)
4.10.4 Main Controller PCB (main)
4.10.5 Main Controller PCB (sub)
4.10.6 Main Controller PCB (sub)
4.10.7 Expansion Bus PCB
4.10.8 SRAM PCB
4.10.9 UFR Board
4.10.10 Ethernet Board
4.10.11 HDD
4.10.12 Controller Fan

Chapter 5. ORIGINAL EXPOSURE SYSTEM
5.1 Construction
5.1.1 Specifications, Control Mechanisms, and Functions
5.1.2 Major Components
5.1.3 Construction of the Control System
5.1.4 Reader Controller PCB
5.2 Basic Sequence
5.2.1 Basic Sequence of Operation at Power-On
5.2.2 Basic Sequence of Operation in Response to a Press on the Start Key
5.3 Various Control Mechanisms
5.3.1 Controlling the Scanner Drive System
5.3.1.1 Overview
5.3.1.2 Controlling the Scanner Motor
5.3.2 Enlargement/Reduction
5.3.2.1 Changing the Magnification in Main Scanning Direction
5.3.2.2 Changing the Magnification in Sub Scanning Direction
5.3.3 Controlling the Scanning Lamp
5.3.3.1 Overview
5.3.3.2 Scanning Lamp
5.3.3.3 Turning On and Off the Scanning Lamp
5.3.4 Detecting the Size of Originals
5.3.4.1 Identifying the Size of Originals
5.3.4.2 Points of Measurement Used for Original Size Identification
5.3.4.3 Overview of Operation
5.3.5 Dirt Sensor Control
5.3.5.1 Stream Reading Dust Detection Control
5.3.5.2 White Plate Dust Detection Control
5.3.6 Image Processing
5.3.6.1 Overview
5.3.6.2 CCD Drive
5.3.6.3 CCD Gain Correction, Offset Correction
5.3.6.4 CCD Output A/D Conversion
5.3.6.5 Outline of Shading Correction
5.3.6.6 Shading Adjustment
5.3.6.7 Shading Correction
5.4 Parts Replacement Procedure
5.4.1 Copyboard Glass
5.4.2 Exposure Lamp
5.4.3 Reader Controller PCB
5.4.4 Interface PCB
5.4.5 Inverter PCB
5.4.6 CCD Unit
5.4.7 Scanner Motor
5.4.8 ADF Open/Close Sensor
5.4.9 Scanner HP Sensor
5.4.10 Original Sensor
5.4.11 Cooling Fan
5.4.12 Scanner Drive Cable

Chapter 6. LASER EXPOSURE
6.1 Construction
6.1.1 Specifications, Control Mechanisms, and Functions
6.1.2 Major Components
6.1.3 Construction of the Control System
6.2 Basic Sequence
6.2.1 Basic Sequence of Operation
6.3 Various Control
6.3.1 Controlling the Laser Activation Timing
6.3.1.1 Turning On and Off the Laser Unit
6.3.1.2 Controlling the Synchronization in Main Scanning Direction
6.3.1.3 Controlling the Synchronization in Sub Scanning Direction
6.3.2 Controlling the Intensity of Laser Light
6.3.2.1 APC Control
6.3.2.2 PWM Control
6.3.3 Controlling the Laser Scanner Motor
6.3.3.1 Controlling the Laser Scanner Motor
6.3.4 Controlling the Laser Shutter
6.3.4.1 Controlling the Laser Shutter
6.4 Parts Replacement Procedure
6.4.1 Laser Scanner Unit

Chapter 7. IMAGE FORMATION
7.1 Construction
7.1.1 Specifications of the Image Formation System
7.1.2 Major Components
7.1.3 Charging System
7.2 Image Formation Process
7.2.1 Image Formation Process
7.3 Basic Sequence
7.3.1 At Time of Power-On
7.3.2 During Copying/Printing (normal speed)
7.3.3 During Copying/Printing (2/3 speed, 1/3 speed)
7.4 Image Stabilization Control
7.4.1 Overview of Image Stabilization Control
7.4.2 Timing of Image Stabilization Control
7.4.3 Potential Control
7.4.4 ATVC Control
7.4.5 ATR Control
7.4.6 ACR Control (Auto Carrier Refresh Control)
7.4.7 D-max Control
7.4.8 D-half Control
7.4.9 PASCAL control
7.5 Charging Meachanism
7.5.1 Controlling the Primary Charging Bias
7.5.2 Controlling the Primary Charging Assembly Cleaning Mechanism
7.5.3 Controlling the Pre-Transfer Charging Bias
7.5.4 Controlling the Pre-Transfer Charging Assembly Cleaning Mechanism
7.5.5 Pre-Exposure LED
7.6 Developing Rotary
7.6.1 Overview of the Developing Rotary
7.6.2 Controlling the Developing Rotary
7.7 Developing Unit
7.7.1 Construction of the Color Developing Assembly
7.7.2 Controlling the Color Developing Assembly Drive Mechanism
7.7.3 Controlling the Color Developing Bias
7.7.4 Color Toner Supply
7.7.5 Detecting the Level of Color Toner
7.7.6 Construction of the Black Developing Assembly
7.7.7 Controlling the Black Developing Assembly Drive Mechanism
7.7.8 Black Toner Supply
7.7.9 Controlling the Black Developing Bias
7.8 Transfer Device
7.8.1 Overview of the Transfer Assembly
7.8.2 Controlling the Transfer Bias
7.8.3 Overview of the Primary Transfer Assembly
7.8.4 Controlling the ITB Cleaner Shifting Mechanism
7.8.5 Checking the ITB Cleaner Position
7.8.6 Overview of the Secondary Transfer Assembly
7.8.7 Controlling the Movement of the Secondary Transfer Roller
7.8.8 Checking the Location of the Secondary Transfer Roller
7.8.9 Detecting the ITB Home Position
7.8.10 Separation
7.9 Photosensitive Drum Cleaning
7.9.1 Overview of the Drum Cleaning Unit
7.9.2 Controlling the Drum Cleaning Unit Drive Mechanism
7.10 Waste Toner Collection Mechanism
7.10.1 Collection of Waste Toner
7.10.2 Detecting the State of the Waste Toner Bottle (full)
7.11 Parts Replacement Procedure
7.11.1 Process Unit
7.11.2 Pre-exposure LED Array
7.11.3 Primary Charging Assembly
7.11.4 Primary Charging Assembly Cleaning Motor
7.11.5 Pre-transfer Charging Assembly
7.11.6 Pre-transfer Charging Assembly Cleaning Motor
7.11.7 Photosensitive Drum Cleaning Unit
7.11.8 Photosensitive Drum
7.11.9 Drum Motor
7.11.10 Drum Heater
7.11.11 Drum Heater PCB
7.11.12 Photosensitive Drum Cleaning Blade
7.11.13 Photosensitive Drum Cleaner Edge Scraper
7.11.14 Hopper Assembly
7.11.15 Hopper Supply Motor
7.11.16 Hopper Strring Motor
7.11.17 Color Developing Assembly
7.11.18 Black Developing Assembly
7.11.19 Black Developing Cylinder
7.11.20 Black Developing Clutch
7.11.21 Color Toner Supply Clutch
7.11.22 Color Developing Clutch
7.11.23 Cleaning Assembly Scoop-Up Sheet
7.11.24 Secondary Transfer Unit
7.11.25 ITB Cleaning Unit
7.11.26 ITB Cleaner End Scraper
7.11.27 Intermediate Transfer Unit
7.11.28 Intermediate Transfer Belt
7.11.29 ITB Home Position Sensor PCB
7.11.30 Secondary Transfer Roller Shift Motor
7.11.31 Primary Transfer Roller
7.11.32 Secondary Transfer Internal Roller
7.11.33 Secondary Transfer Roller
7.11.34 ITB Cleaning Blade
7.11.35 ITB Scoop-up Sheet
7.11.36 Intermediate Transfer Belt Static Eliminator
7.11.37 Secondary Transfer Static Eliminator
7.11.38 Potential Sensor Unit
7.11.39 ATR Sensor Unit
7.11.40 Patch Image Sensor
7.11.41 Idle Roller
7.11.42 Patch Image Reading Sensor Shutter Solenoid
7.11.43 Charging Wire

Chapter 8. PICKUP/FEEDING SYSTEM
8.1 Construction
8.1.1 Specifications, Control Mechanisms, and Functions
8.1.2 Major Divisions of the Machine
8.1.3 Arrangement of Rollers
8.1.4 Diagram of the Paper Path
8.1.5 Arrangement of Sensors
8.1.6 Arrangement of Solenoids
8.1.7 Arrangement of Drive Mechanisms
8.2 Basic Sequence
8.2.1 Basic Sequence of Operation (in response to a press on the Start key)
8.2.2 Interval Acceleration
8.2.3 Stopping the Paper Before Registration
8.3 Detecting Jams
8.3.1 Delay Jams
8.3.1.1 Cassette/Deck Pickup Assembly (right deck, left deck, cassette 3/4)
8.3.1.2 Delay Jam (source of paper other than cassette/deck)
8.3.2 Stationary Jams
8.3.2.1 Common Stationary Jam
8.3.2.2 Stationary Jam at Power-On
8.3.3 Other Jams
8.3.3.1 Wrong Paper Size
8.3.3.2 Wrong Material
8.4 Cassette
8.4.1 Overview
8.4.2 Identifying Paper Sizes
8.4.3 Setting the Universal Cassette
8.4.4 Checking the Level of Remaining Paper
8.5 Cassette Pick-Up Unit
8.5.1 Overview
8.5.2 Basic Sequence
8.5.3 Movement of the Lifter
8.6 Manual Feed Pickup Unit
8.6.1 Overview
8.6.2 Basic Sequence
8.6.3 Identifying the Size of Paper
8.6.4 Identifying the Last Sheet
8.7 Deck
8.7.1 Overview
8.7.2 Basic Sequence
8.7.3 Identifying the Size of Paper
8.7.4 Checking the Level of Remaining Paper
8.8 Registration Unit
8.8.1 Overview
8.9 Duplex Feeding Unit
8.9.1 Overview
8.9.2 Detecting the Horizontal Registration Position
8.9.3 A5, 5 Sheets in Circulation
8.9.4 A3, 3 Sheets in Circulation
8.10 Delivery
8.10.1 Overview
8.10.2 Face-Up Delivery
8.10.3 Face-Down Delivery
8.11 Parts Replacement Procedure
8.11.1 Cassette Pickup Unit
8.11.2 Cassette Pickup Motor
8.11.3 Cassette Lifter Motor
8.11.4 Left Deck Lifter Motor
8.11.5 Right Deck Lifter Motor
8.11.6 Left Deck Pickup Motor
8.11.7 Right Deck Pickup Motor
8.11.8 Vertical Path Motor
8.11.9 Right Deck Pull-Off Motor
8.11.10 Cassette Paper Level Sensor (A/B)
8.11.11 Left Deck Paper Level Sensor
8.11.12 Right Deck Pickup Assembly
8.11.13 Left Deck Pickup Assembly
8.11.14 Right Deck Pickup/Feed/Separation Roller
8.11.15 Left Deck Pickup/Feed/Separation Roller
8.11.16 Cassette Pickup/Feed/Separation Roller
8.11.17 Manual Feed Unit
8.11.18 Manual Feed Roller
8.11.19 Manual Feed Separation Roller
8.11.20 Manual Feed Pre-Regustration Motor
8.11.21 Horizontal Registration Assembly
8.11.22 Registration Motor
8.11.23 Horizontal Registration Motor
8.11.24 Duplex Reversal Motor
8.11.25 Duplex Left Motor
8.11.26 Duplex Middle Motor
8.11.27 Duplex Right Motor
8.11.28 Outside Delivery Motor

Chapter 9. FIXING SYSTEM
9.1 Construction
9.1.1 Specifications, Control Mechanisms, and Functions
9.1.2 Major Components
9.1.3 Construction of the Control System
9.2 Basic Sequence
9.2.1 Sequence of Operation at Power-On
9.2.2 Basic Sequence of Operation (printing)
9.3 Various Control Mechanisms
9.3.1 Controlling the Speed of the Fixing Roller
9.3.1.1 Controlling the Speed According to Paper Type
9.3.1.2 Controlling the Speed for Large Volume Printing (down-sequence)
9.3.1.3 Interval Rotation
9.3.2 Controlling the Fixing Roller Temperature
9.3.2.1 Overview
9.3.2.2 At Power-On
9.3.2.3 In Standby
9.3.2.4 When Producing Mono Color (Black) Single-Sided Prints
9.3.2.5 When Producing Mono Color (Black) Double-Sided Prints
9.3.2.6 When Producing Full Color Prints
9.3.2.7 With Power Save Mode Enabled
9.3.2.8 Controlling the Overheating at the End of the Roller
9.3.3 External Heat Roller Drive Control
9.3.3.1 Overview
9.4 Fixing Cleaning Web Mechanisms
9.4.1 Overview
9.4.2 Web Retaining Mechanism
9.5 Protective Functions
9.5.1 Detecting Overheating Using Thermistors
9.5.2 Cutting Off the Power Using Thermal Switches
9.5.3 Errors
9.6 Parts Replacement Procedure
9.6.1 Fixing Unit
9.6.2 Fixing Roller
9.6.3 Pressure Roller
9.6.4 External Heat Roller
9.6.5 Fixing Thermistor (Upper)
9.6.6 Fixing Thermistor (Lower)
9.6.7 External Heat Thermistor
9.6.8 Fixing Thermal Switch
9.6.9 Fixing Locking Thermal Switch
9.6.10 Thermal Switch
9.6.11 Upper Fixing Heater
9.6.12 Lower Fixing Roller
9.6.13 Fixing Locking Heater
9.6.14 Fixing Web
9.6.15 Fixing Motor
9.6.16 External Heater Shift Motor
9.6.17 Upper Separation Claw
9.6.18 Lower Separation Claw

Chapter 10. EXTERNALS AND CONTROLS
10.1 Control Panel
10.1.1 Overview
10.1.2 LCD Processing
10.1.3 LCD Contrast Adjustment
10.1.4 Control Panel CPU
10.2 Counters
10.2.1 Overview
10.2.2 Increasing the Count
10.3 Fans
10.3.1 Overview
10.3.2 Sequence of Operations
10.4 Power Supply
10.4.1 Power Supply
10.4.1.1 Route of Power Supply Inside the Printer Unit
10.4.1.2 Route of Power Supply Inside the Printer Unit
10.4.1.3 Power to the Environment Heater
10.4.2 Rated Output of DC Power Supply PCB
10.4.2.1 Rated Output of the Printer Power Supply PCB
10.4.2.2 Rated Output of the DC/DC Converter PCB 1
10.4.2.3 Rated Output of the DC/DC Converter PCB 1
10.4.3 Backup Battery
10.4.3.1 Backup Battery
10.4.4 Protection Function
10.4.4.1 Protection of the Power Supply PCB
10.4.4.2 Protection by a Fuse
10.5 Parts Replacement Procedure
10.5.1 External Covers
10.5.2 Hopper Drive Unit
10.5.3 Power Cord Base
10.5.4 Control Panel
10.5.5 DC Controller PCB
10.5.6 Printer Power Supply PCB
10.5.7 Leakage Breaker
10.5.8 Fixing Relay
10.5.9 Relay PCB
10.5.10 DC Relay
10.5.11 HV1 PCB
10.5.12 HV2 PCB
10.5.13 HV3 PCB
10.5.14 Fixing/Feed Driver PCB
10.5.15 Pickup Driver PCB
10.5.16 Switch PCB
10.5.17 Primary Exhaust Fan
10.5.18 Fixing Heat Discharge Fan
10.5.19 Power Supply Cooing Fan
10.5.20 Delivery Cooling Fan 1
10.5.21 Delivery Cooling Fan 2
10.5.22 Ozone Filter
10.5.23 Toner Filter
10.5.24 Sub Toner Filter

Chapter 11. RDS (for iR C6870U/iR C5870U)
11.1 RDS
11.1.1 Application operation mode
11.1.2 Service Center URL and Port Specification
11.1.3 Communication test
11.1.4 Communication log
11.1.5 Detailed Communication log
11.1.6 SOAP communication function
11.1.7 Resend at SOAP transmission error
11.1.8 e-RDS setting screen
11.1.9 Sleep operation
11.1.10 Network Setting(Maintenance)
11.1.11 e-RDS Setting
11.1.12 Trouble shoot
11.1.13 Error message

Chapter 12. MAINTENANCE AND INSPECTION
12.1 Periodically Replaced Parts
12.1.1 Overview
12.1.2 Reader Unit
12.1.3 Printer Unit
12.2 Durables and Consumables
12.2.1 Overview
12.2.2 Reader Unit
12.2.3 Printer Unit
12.3 Scheduled Servicing Basic Procedure
12.3.1 Scheduled Servicing Basic Procedure
12.3.2 Scheduled Servicing (reader unit)
12.3.3 Scheduled Servicing (printer unit)
12.3.4 Shifting the Photosensitive Drum Phase
12.4 Cleaning
12.4.1 Cleaning the Secondary Transfer Rear Guide
12.4.2 Cleaning the Registration Roller, Registration Guide, and Transparency Sensor

Chapter 13. STANDARDS AND ADJUSTMENTS
13.1 Image Adjustment Basic Procedure
13.1.1 Image Adjustment Basic Procedure 1
13.1.2 Image Adjustment Basic Procedure 2
13.1.3 Image Adjustment Basic Procedure 3
13.1.4 Image Adjustment Basic Procedure 4
13.1.5 Image Adjustment Basic Procedure 5
13.1.6 Image Adjustment Basic Procedure 6
13.1.7 Potential Control Conversion Table
13.2 Image Adjustments
13.2.1 Image Position
13.2.2 Checking the Image Position
13.2.3 Cassette
13.2.4 Manual Feed Tray
13.2.5 Front Deck
13.3 Scanning System
13.3.1 After Replacing the CCD Unit
13.3.2 After Replacing the Copyboard Glass
13.3.3 After Replacing the Reader Controller PCB or Initializing the RAM
13.4 Laser Exposure System
13.4.1 After Replacing the Laser Scanner
13.5 Image Formation System
13.5.1 After Replacing the Black Developing Unit
13.5.2 Points to Note When Attaching the Polarity Positioning Plate
13.5.3 Replacing the Color Developing Unit
13.5.4 Replacing the Starter of the Color Developing Unit
13.5.5 After Replacing the Primary Charging Assembly
13.5.6 After Replacing the Primary Charging Wire
13.5.7 After Replacing the Pre-Transfer Charging Wire
13.5.8 After Replacing the Pre-Transfer Charging Wire
13.5.9 After Replacing the Waste Toner Box
13.5.10 After Replacing the ITB Cleaning Blade
13.5.11 After Repacking the Photosensitive Drum Cleaning Blade
13.5.12 Replace the Photosensitive Drum
13.5.13 Points to Note When Replacing the Drum Heater
13.5.14 Points to Note When Replacing the Drum Heater PCB
13.5.15 After Repacking the ITB
13.5.16 After Replacing the Primary Transfer Roller
13.6 Fixing System
13.6.1 Points to Note When Attaching the Fixing Assembly
13.6.2 After Replacing the Fixing Roller
13.6.3 After Replacing the Fixing Web
13.6.4 Position of the Fixing inlet Guide
13.6.5 Points to Note When Attaching the Pressure Roller
13.6.6 Adjusting the Nip Pressure of the Pressure Roller
13.6.7 Adjusting the Position of the Feeding Web Solenoid (SL2)
13.6.8 Points to Note About the Position of the Fixing Thermal Switch
13.6.9 Points to Note When Mounting the Shift Thermal Switch
13.6.10 Points to Note When Mounting the Outside Heating Roller Thermal Switch
13.6.11 Points to Note When Mounting the Fixing Upper Thermistor
13.6.12 Points to Note When Mounting the Fixing Lower Thermistor
13.6.13 Points to Note When Mounting the External Heat Thermistor
13.7 Electrical Components
13.7.1 When Replacing the Reader Controller PCB
13.7.2 After Replacing the DC Controller PCB
13.7.3 Points to Note When Mounting the DC Controller PCB/ DC Controller Box
13.7.4 After Replacing the Main Controller PCB (main)
13.7.5 After Repacking the SRAM Board
13.7.6 After Replacing the HDD
13.7.7 When Replacing the HV2 PCB
13.7.8 When Replacing the ATR Sensor/Patch Image Read Sensor
13.8 Pickup/Feeding System
13.8.1 Adjusting the Horizontal Registration After Replacing the Pickup Cassette
13.8.2 Adjusting the Manual Feed Pickup Horizontal Registration
13.8.3 Adjusting the Front Deck Pickup Horizontal Registration
13.8.4 Registering the Paper Width Basic Value

Chapter 14. CORRECTING FAULTY IMAGES
14.1 Making lnitial Checks
14.1.1 Checking the Site Environment
14.1.2 Checking the Paper
14.1.3 Checking the Placement of Paper
14.1.4 Checking the Durables
14.1.5 Checking the Periodically Replaced Parts
14.1.6 Checking the Units and Functional Blocks
14.1.7 Others
14.2 Test Print
14.2.1 Overview
14.2.2 Test Print TYPE
14.2.3 Selecting Test Print TYPE
14.2.4 16-Gradation (TYPE=4)
14.2.5 Full Page Halftone (TYPE=5)
14.2.6 Grid (TYPE=6)
14.2.7 MCYBk Horizontal Stripes (TYPE=10)
14.2.8 64-Gradation (TYPE=12)
14.2.9 Full Color 16-Gradation (TYPE=14)
14.3 Troubleshooting
14.3.1 Symptoms
14.3.1.1 Symptoms
14.3.1.2 Maintenance Recommendations for Components Around the Photosensitive Drum/
Intermediate Transfer Unit in the Event of an Image Fault
14.3.2 Image Faults
14.3.2.1 Solid Image
14.3.2.2 Light Image / Weak Density
14.3.2.3 Foggy Image
14.3.2.4 Uneven Density
14.3.2.5 Out of Focus
14.3.2.6 Partially Blank/Streaked
14.3.2.7 Smudged/Streaked
14.3.2.8 Ghost / Memory
14.3.2.9 Faulty Color Reproduction
14.3.3 Faulty Feeding
14.3.3.1 Skew Feed
14.3.3.2 Fold/Rip
14.3.3.3 Ripple
14.3.3.4 Wrap
14.3.4 Malfunction
14.3.4.1 No Power
14.3.4.2 Control Panel-Related
14.3.4.3 Counter Malfunction
14.3.4.4 Malfunction/Faulty Detection
14.3.4.5 Noise
14.3.4.6 User Warning Message
14.3.4.7 Other Defect
14.3.4.8 Part Breakage/Detachment
14.3.5 Printing/scanning
14.3.5.1 No Output
14.3.5.2 Installation Failure
14.3.5.3 Faulty Printing/Scanning Result
14.3.6 Network
14.3.6.1 Start-Up Failure
14.3.6.2 Connection Problem
14.3.7 Transmission/Fax-Related
14.3.7.1 Transmission Problem
14.3.7.2 Reception Problem
14.3.7.3 Other Operational Defect
14.3.7.4 Setting/Registration Defect
14.3.8 Jam (Main Unit)
14.3.8.1 1700 Jam Code: Explanation of 1700 Jam Code
14.3.8.2 0103/0104 Jam Code Neuissiedler large-size/RA3 pickup fault
14.3.8.3 0101 Jam Code: Only occurs with right paper deck, upon installation
14.3.8.4 0109/0110 Jam Code: Vertical Path Roller does not rotate
14.3.8.5 0109 Jam Code: Occurs only during duplex copy/print
14.3.8.6 010A Jam Code: Occurs only with machines that are equipped with Side Paper Deck-D1
14.3.8.7 010A Jam Code: Rotational failure of Manual feed pre-registration motor (M6) due to DC Controller PCB failure
14.3.8.8 010C Jam Code: Occurs during feeding B5/STMT paper (small size), Due to rotational failure of paper feeder fan
14.3.8.9 020E Jam Code: Cogged timing belt in Finisher-R1 is detached
14.3.8.10 0216 Jam Code: Malfunction of Registration Sensor Flag
14.3.8.11 0A0A/020A Jam Code: Sometimes jam occurrence indication remains displaying
14.3.8.12 0A0C Jam Code: Stationary jam at power-on at Inside Delivery Sensor PS12
14.3.8.13 0A0C Jam Code: Stationary jam at Inside Delivery Sensor PS12,
14.3.8.14 0A15 Jam Code: Stationary jam at power-on at Fixing Inlet Sensor PS11
14.3.8.15 0A16 Jam Code: Stationary jam at power-on at Left Deck Stationary Sensor PS47
14.3.9 Jam (Document Feeder)
14.3.9.1 Original feeding failure: How to set service mode items after clearing RAM, DADF-M1
14.3.10 Jam (FIN)
14.3.10.1 1101 Jam Code: Because Finisher Controller PCB is faulty, Finisher-R1/Saddle Finisher-R2
14.3.10.2 1104 Jam Code: Because compression spring for 1st delivery roller comes off, Finisher-R1/Saddle Finisher-R2
14.3.10.3 1104/1101 Jam Code: Troubleshooting, Finisher-R1/Saddle Finisher-R2
14.3.10.4 1104/1101 Jam Code: Because compression spring for inlet roller is not properly installed,Finisher-R1 / Saddle Finisher-R2
14.3.10.5 1104 Jam Code: Because grounding plate of swing guide unit is not properly positioned, Finisher-R1 / Saddle Finisher-R2
14.3.10.6 1200 Jam Code: Timing Jam due to soil of Inlet Path Sensor PI33
14.3.11 Error Code
14.3.11.1 E001-0001/E001-0003 Error Code: When turning Energy Save Mode off
14.3.11.2 E001-0001/E001-0002/E001-0003 Error Code: Because fixing drawer (AC Driver cable) haspoor contact
14.3.11.3 E001-0002 Error Code: Abnormal (rumbling) sound occurs when fixing roller is rotating
14.3.11.4 E003-0041/E003-0042/E003-0043 Error Code: Because fixing drawer (AC Driver cable) haspoor contact
14.3.11.5 E004-0002 Error Code: Fixing Sub Heater is broken
14.3.11.6 E005-0000 Error Code: How to clear error code
14.3.11.7 E006-0001 Error Code: Because fixing drawer (AC Driver cable) has poor contact
14.3.11.8 E006-0001 Error Code: Due to deformation of fixing roller
14.3.11.9 E008-0001 Error Code: Necessary steps upon indication
14.3.11.10 E009-00FF Error Code: Because of broken 24T gear in fixing drive unit
14.3.11.11 E514-8001/E514-8002 Error Code / Misalignment in staple/sort/group mode: Finisher-R1/Saddle Finisher-R2
14.3.11.12 E013-0001 Error Code: How to clear waste toner full detection
14.3.11.13 E013-0001 Error Code: How to change the waste toner detection timing
14.3.11.14 E014-0001 Error Code/abnormal noise: Detachment of fixing roller occurs because C-ring (stop ring) is detached
14.3.11.15 E020-0XD2 Error Code: Claws of color developing assembly cover are not securely snapped into place
14.3.11.16 E020-03A0 Error Code: When making continuous or intermittent copy of color image
14.3.11.17 E020-0xA9/0xA0 Error Code: Troubleshooting
14.3.11.18 E020-0xA8/0xA2 Error Code: Troubleshooting
14.3.11.19 E020-0281 Error Code: When auto gradation adjustment is performed upon installation
14.3.11.20 E020-03A0/E020-03A1/E020-03A2/E020-03A3 Error Code: Because output voltage from DC Power Relay PCB is not enough
14.3.11.21 E020-03A0 Error Code: Displayed after replacement of DC Controller PCB
14.3.11.22 E020-00FF Error Code: Because of DC Controller PCB failure
14.3.11.23 E020-03A0 Error Code: Because J119 connector on DC power relay PCB is disconnected
14.3.11.24 E020-00FF Error Code: Because hopper stirring motor (M23) causes rotation failure
14.3.11.25 E043-0001 Error Code: Abnormal noise from Paper Pick-up Ass’y of Side Paper Deck
14.3.11.26 E061-0007 Error Code: Because potential sensor connector is disconnected upon installation
14.3.11.27 E070-0001 Error Code: ITB Home Position detection error
14.3.11.28 E070-0001 Error Code: ITB home position cannot be detected after replacement of ITB
14.3.11.29 E070-0003 Error Code: Because of poor contact of leaf spring of static-charge eliminator in
ITB Transfer Ass’y, after replacement of primary transfer roller
14.3.11.30 E070-0101 Error Code: Reflecting surface for ITB HP detection is soiled
14.3.11.31 E070 Error Code: Difference between sub codes 0001 and 0002 and their function
14.3.11.32 E073-0001 Error Code: Because of deformation of release arm of Fixing Feeder Ass’y
14.3.11.33 E077-0001 Error Code: Secondary transfer outside roller shift motor (M20) does not run
14.3.11.34 E077-0001 Error Code: Secondary Transfer Outside Roller repeats up-and-down movement upon power-on
14.3.11.35 E079/E009 Error Code: Because of broken 24T gear
14.3.11.36 E020/E021/E061/E070/E078/E820 Error Code / Poor contact of connectors around process unit
14.3.11.37 E020-03A0/E020-01A2 Error Code
14.3.11.38 E061-0001 Error Code
14.3.11.39 E070-0102 Error Code
14.3.11.40 E070-0101/E070-0102/E070-0201/E070-0202/E070-0302 Error Code
14.3.11.41 E542-8001 Error Code
14.3.11.42 E100 Error Code: Because of deformation of laser shutter lever
14.3.11.43 E100-0002 Error Code: Fine lines appear on front side of image in sub scanning direction because laser scanner assembly is faulty
14.3.11.44 0111 Jam Code: Occurs when copying in duplex mode
14.3.11.45 0111 Jam Code: Because tension spring of reverse driven roller comes off
14.3.11.46 E197 Error Code: Release arm of Fixing Feeder Ass’y was deformed
14.3.11.47 E248-0000 Error Code: Upon installation
14.3.11.48 E505 Error Code: Alignment/staple position adjustment backup data error, Finisher-R1/Saddle Finisher-R2
14.3.11.49 E540-8003 Error Code: Occurs when Upper Tray ascends because of Back End Assist Plate coming off
14.3.11.50 E540-8002/E540-8001 Error Code: Finisher-R1 / Saddle Finisher-R2
14.3.11.51 E602-0001 Error Code: Unable to enter Download mode because Main Controller PCB is faulty
14.3.11.52 E719-0011 Error Code: After clearing error code, “Enter the Dept. ID and Password using the numeric keys.” appears, Card Reader-C1
14.3.11.53 E733-0001/E732-0001 Error Code: Occurs when progress bar is completed after power-on
14.3.11.54 E747-00FF Error Code
14.3.11.55 E800-0001 Error Code: Installation of Fixing Feeder Ass’y is not properly detected
14.3.11.56 E800-0001 Error Code: Because of deformation of release arm of Fixing Feeder Ass’y
14.3.11.57 E820-0002 Error Code: Because of rotational failure of process unit cooling fan (FM7)
14.3.11.58 E824-000 Error Code: Because of rotational failure of primary charging suction fan (FM1)
14.3.11.59 1200/1104 Jam Code due to unintended rotation of shutter open/close clutch (CL31): Finisher-R1/Saddle Finisher-R2
14.3.12 FAX # Code
14.3.12.1 #801 Error Code: Upon installation, machine can send data to shared folder on PC with Windows2000 but can’t do so to shared folder on PC with WindowsXP
14.3.13 Operability
14.3.13.1 Finger is pinched when setting Bk toner bottle
14.3.14 Specifications-Related FAQ
14.3.14.1 FAQ on Main Unit Specifications
14.3.14.2 FAQ on Send Specifications
14.3.14.3 FAQ on LIPS Specifications
14.3.14.4 FAQ on UFR Specifications
14.3.14.5 FAQ on G3FAX Specifications
14.3.14.6 FAQ on I-FAX Specifications
14.3.14.7 FAQ on Remote UI Specifications
14.4 Outline of Electrical Components
14.4.1 Motor
14.4.1.1 Motors
14.4.2 Clutch/Solenoid
14.4.2.1 Clutches and Solenoids
14.4.3 Fan
14.4.3.1 Fans
14.4.4 Sensor
14.4.4.1 Sensors
14.4.5 Switch
14.4.5.1 Switches
14.4.6 Lamps, Heaters, and Others
14.4.6.1 Heaters, Lamps, and Others
14.4.7 PCBs
14.4.7.1 PCB
14.4.7.2 PCB
14.4.8 Variable Resistors (VR), Light-Emitting Diodes (LED), and Check Pins by PCB
14.4.8.1 Variable Resistors (VR), Light-Emiting Diodes (LED), and Check Pins by PCB
14.4.8.2 Points to Note About the Leakage Breaker
14.4.8.3 Main Controller PCB (main)
14.4.8.4 DC Controller PCB
14.4.8.5 HV1 PCB
14.4.8.6 HV2 PCB
14.4.8.7 HV3 PCB

Chapter 15. SELF DIAGNOSIS
15.1 Error Code Table
15.1.1 Error Code
15.2 Error Code Details
15.2.1 Error Code in Detail
15.3 Error Codes (SEND)
15.3.1 Self-Diagnostic Display
15.3.2 List of Error Codes without Messages
15.4 Jam Codes
15.4.1 Jam Code (printer unit)
15.4.2 Jam Code (finisher-related)
15.4.3 Jam Code (ADF-related)
15.5 Alarm Codes
15.5.1 Alarm Code

Chapter 16. SERVICE MODE
16.1 Outline
16.1.1 Construction of Service Mode
16.1.2 Entering or selecting service modes
16.1.3 Exiting service modes
16.1.4 Back-Up
16.1.5 Initial Screen
16.1.6 Main/intermediate Item Screen
16.1.7 Sub- Item Screen
16.2 DISPLAY (Status Display Mode)
16.2.1 COPIER
16.2.1.1 COPIER List for iR C6800/iR C5800
16.2.1.2 COPIER List for iR C6870U/iR C5870U
16.2.2 FEEDER
16.2.2.1 FEEDER List
16.3 I/O (I/O Display Mode)
16.3.1 Overview
16.3.2 DC-CON
16.3.3 DC-CON
16.3.4 R-CON
16.3.5 FEEDER
16.3.6 SORTER
16.3.7 MN-CONT
16.4 ADJUST (Adjustment Mode)
16.4.1 COPIER
16.4.1.1 COPIER List
16.4.1.2 COPIER List
16.4.2 FEEDER
16.4.2.1 FEEDER List
16.4.3 SORTER
16.4.3.1 SORTER List
16.5 FUNCTION (Operation/Inspection Mode)
16.5.1 COPIER
16.5.1.1 COPIER List
16.5.1.2 COPIER List
16.5.2 FEEDER
16.5.2.1 FEEDER List
16.6 OPTION (Machine Settings Mode)
16.6.1 COPIER
16.6.1.1 COPIER List
16.6.1.2 COPIER List
16.6.2 FEEDER
16.6.2.1 FEEDER List
16.6.3 SORTER
16.6.3.1 SORTER List
16.6.4 BOARD
16.6.4.1 BOARD List
16.6.4.2 BOARD List
16.7 TEST (Test Print Mode)
16.7.1 COPIER
16.7.1.1 COPIER List
16.7.1.2 COPIER List
16.8 COUNTER (Counter Mode)
16.8.1 COPIER
16.8.1.1 COPIER List
16.8.1.2 COPIER List

Chapter 17. imageRUNNER C6800/C5800 UPGRADING
17.1 Outline
17.1.1 Outline of the Version Upgrade
17.1.2 Outline of the Service Support Tool
17.1.3 Network Interface of the Machine with the SST in Use
17.2 Making Preparations
17.2.1 Registering the System software
17.2.2 Making Connections
17.3 Formatting the HDD
17.3.1 Formatting All Partitions
17.3.2 Formatting Selected Partitions
17.3.3 Formatting the Procedure
17.4 Downloading System Software
17.4.1 Batch Downloading
17.4.1.1 Overview
17.4.1.2 Downloading Procedure
17.4.2 Downloading the System Software
17.4.2.1 Outline
17.4.2.2 Downloading Procedure
17.4.3 Downloading the RUI, and Language Module
17.4.3.1 Outline
17.4.3.2 Downloading Procedure
17.4.4 Downloading the BOOT Software
17.4.4.1 Outline
17.4.4.2 Downloading Procedure
17.4.5 Downloading the Dcon and Rcon Software
17.4.5.1 Outline
17.4.5.2 Downloading Procedure
17.4.6 Downloading the FAX Software
17.4.6.1 Outline
17.4.6.2 Downloading Procedure
17.5 Uploading and Downloading Backup Data
17.5.1 Outline
17.5.2 Uploading Procedure
17.5.3 Downloading Procedure

Chapter 18. imageRUNNER C6870U/C5870U UPGRADING
18.1 Outline
18.1.1 Overview of Upgrading Work
18.1.2 Outline of the Functions and Operations
18.2 Making Preparations
18.2.1 Installing the System Software (System CD -> SST)
18.2.2 Copying the System Software (SST -> USB)
18.2.3 Making Connections (SST in use)
18.2.4 Making Connections (USB device in use)
18.3 Formatting the HDD
18.3.1 Formatting All Partitions
18.3.2 Formatting Selected Partitions
18.3.3 Formatting the Partitions
18.4 Downloading System Software
18.4.1 Batch Downloading
18.4.1.1 Overview
18.4.1.2 Downloading Procedure
18.4.2 Downloading the System Software
18.4.2.1 Outline
18.4.2.2 Downloading Procedure
18.4.3 Downloading the RUI, and Language Module
18.4.3.1 Outline
18.4.3.2 Downloading Procedure
18.4.4 Downloading the SDICT
18.4.4.1 Outline
18.4.4.2 Downloading Procedure
18.4.5 Downloading the MEAPCONT
18.4.5.1 Outline
18.4.5.2 Downloading Procedure
18.4.6 Downloading the KEY
18.4.6.1 Outline
18.4.6.2 Downloading Procedure
18.4.7 Downloading the TTS
18.4.7.1 Outline
18.4.7.2 Downloading Procedure
18.4.8 Downloading the BROWSER
18.4.8.1 Outline
18.4.8.2 Downloading Procedure
18.4.9 Downloading the BOOT Software
18.4.9.1 Outline
18.4.9.2 Downloading Procedure
18.4.10 Downloading the Dcon and Rcon Software
18.4.10.1 Outline
18.4.10.2 Downloading Procedure
18.5 Uploading and Downloading Backup Data
18.5.1 Outline
18.5.2 Uploading Procedure
18.5.3 Downloading Procedure
18.6 Version Upgrade using USB
18.6.1 Overview of Menus and Functions
18.6.2 Downloading/Writing the System Software (auto)
18.6.3 Downloading the System Software (Confirmation execution when version is downed the same version)
18.6.4 Downloading the System Software (all overwriting)
18.6.5 Formatting the HDD
18.6.6 Other Functions

Chapter 19. SERVICE TOOLS
19.1 Service Tools
19.1.1 Special Tools
19.1.2 Solvents and Oils

APPENDIX
General Timing Chart – Full Color Mode
General Timing Chart – Mono Color Mode
General Circuit Diagram – List of Signals
General Circuit Diagrams

——————–

Content for Canon iR C6800/5800 Series, PARTS CATALOG:
Parts List Index
iR C6800/5800 Series
ASSEMBLY LOCATION DIAGRAM
ADF ACCESSORY
CASSETTE ACCESSORY
EXTERNAL COVERS, PANELS, ETC
MACHINE FRONT PLATE
INTERNAL COMPONENTS 1
INTERNAL COMPONENTS 2
INTERNAL COMPONENTS 3
INTERNAL COMPONENTS 4
MACHINE REAR PLATE 1
MACHINE REAR PLATE 2
MACHINE BOTTOM PLATE
POWER CORD TERMINAL ASSEMBLY
CONTROL PANEL ASSEMBLY
RIGHT DOOR ASSEMBLY
FIXING EXHAUST FAN ASSEMBLY
PRIMARY EXHAUST FAN ASSEMBLY
TRANSFER CLEANER COOLING FAN ASS’Y
DELIVERY COOLING FAN ASSEMBLY
SCANNER COOLING FAN ASSEMBLY
READER ASSEMBLY
READER FRAME ASSEMBLY
VERTICAL PATH DRIVE ASSEMBLY
EXTERNAL DELIVERY DRIVE ASSEMBLY
CASSETTE PICK-UP DRIVE ASSEMBLY
LEFT PICK-UP DRIVE ASSEMBLY
RIGHT PICK-UP DRIVE ASSEMBLY
MULTI PRE-REG. DRIVE ASSEMBLY
DEVELOPING DRIVE ASSEMBLY
DRUM I.T.B. DRIVE ASSEMBLY
SIDE REGIST. MOTOR ASSEMBLY
HOPPER DRIVE ASSEMBLY
BOTTLE DRIVE ASSEMBLY
FIXING DRIVE ASSEMBLY
WASTE TONER DRIVE ASSEMBLY
SEC. TRANSFER CAM DRIVE ASS’Y
RIGHT PAPER STOCK ASSEMBLY
LEFT PAPER STOCK ASSEMBLY
CASSETTE HEATER ASSEMBLY
RIGHT PAPER PICK-UP ASSEMBLY
LEFT PAPER PICK-UP ASSEMBLY
MULTI P. PICK-UP MOUNT ASSEMBLY
MULTI PAPER PICK-UP TRAY ASSEMBLY
REVERSE ROLLER ASSEMBLY
FIXING FEEDER ASSEMBLY
REGISTRATION MOUNT ASSEMBLY
PRE-FIXING FEEDER ASSEMBLY
EXTERNAL DELIVERY ASSEMBLY
REV. PAPER DELIVERY DOOR ASSEMBLY
PAPER FEEDER FRAME ASSEMBLY
INTERNAL PAPER DELIVERY ASS’Y
MIRROR ASSEMBLY 1
MIRROR ASSEMBLY 2
LASER SCANNER ASSEMBLY
PHOTO-SENSITIVE DRUM ASSEMBLY
SECONDARY TRANSFER MOUNT ASS’Y
I.T.B. POSITIONING ASSEMBLY
INTERMED. TRANSFER BELT ASS’Y
TRANSFER CLEANER ASSEMBLY
PRIMARY CORONA ASSEMBLY
PRE-TRANSFER CORONA ASSEMBLY
AP KIT ASSEMBLY
HOPPER ASSEMBLY (BK)
DEVELOPING ASSEMBLY (BK)
DEVELOPING ASSEMBLY(M/C/Y)
ATR SENSOR ASSEMBLY
WASTE TONER PIPE ASSEMBLY
FIXING ASSEMBLY
FIXING CLEANER ASSEMBLY
CONTROLLER BOX ASSEMBLY
DC POWER SUPPLY ASSEMBLY
CONTROL PANEL INVERTER PCB ASSEMBLY
DC CONTROLLER PCB ASSEMBLY
MAIN CONTROLLER MAIN PCB ASSEMBLY
READER CONTROLLER PCB ASSEMBLY
POTENTIAL SENSOR PCB ASSEMBLY
DC DC CONVERTER PCB ASSEMBLY 1
FIXING FEEDING DRIVER PCB ASSEMBLY
HVT1 PCB ASSEMBLY
HVT3 PCB ASSEMBLY
HVT2 PCB ASSEMBLY
LIST OF CONNECTORS

Number of pages: 1368.