Konica Minolta Bizhub C654 Bizhub C754 Field Service Manual, Theory of Operation, Parts List Manual

Field Service Manual, Theory of Operation and Parts List Konica Minolta Bizhub C654 Bizhub C754;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Konica Minolta Bizhub C654 Bizhub C754 copier.
You can print, zoom or read any diagram, picture or page from this Field Service, Theory of Operation, Parts List Manual. Every chapter on this manual is fully detailed and contain all the  simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Konica Minolta Bizhub C654 Bizhub C754 photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

A: SAFETY AND IMPORTANT WARNING ITEMS
1. IMPORTANT NOTICE
2. DESCRIPTION ITEMS FOR DANGER, WARNING AND CAUTION
2.1 Description items in this Service Manual
2.2 Description items for safety and important warning items
3. SAFETY WARNINGS
3.1 MODIFICATIONS NOT AUTHORIZED BY KONICA MINOLTA BUSINESS TECHNOLOGIES, INC
3.1.1 Actions requiring special attention
3.2 POWER PLUG SELECTION
3.2.1 Power Cord Set or Power Plug
3.3 CHECKPOINTS WHEN PERFORMING ON-SITE SERVICE
3.3.1 Power Supply
3.3.2 Installation Requirements
3.3.3 After Service
3.4 FUSE
3.5 Used Batteries Precautions
3.5.1 ALL Areas
3.5.2 Germany
3.5.3 France
3.5.4 Denmark
3.5.5 Finland, Sweden
3.5.6 Norway
3.6 Laser Safety
3.6.1 Laser Safety
3.6.2 Internal Laser Radiation
3.6.3 Laser Safety Label
3.6.4 Laser Caution Label
3.6.5 PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT
4. WARNING INDICATIONS ON THE MACHINE
4.1 Warning indications inside the machine
4.2 Warning indications on the boards
5. MEASURES TO TAKE IN CASE OF AN ACCIDENT

B: NOTATION OF THE CONTENTS
1. PRECAUTION ON HANDLING THIS MANUAL
2. PRODUCT NAME
3. BRAND NAME
3.1 TRADEMARKS OF OTHER COMPANIES
3.2 OWN TRADEMARKS
4. FEEDING DIRECTION

C: PRODUCT SPECIFICATIONS
1. Bizhub C754/C654
1.1 Type
1.2 Functions
1.3 Paper
1.4 Materials
1.4.1 bizhub C754
1.4.2 bizhub C654
1.4.3 Standard mode
1.5 Print volume
1.5.1 bizhub C754
1.5.2 bizhub C654
1.6 Machine specifications
1.7 Operating environment
1.8 Print functions
1.9 Scan functions
1.10 Note for the Specifications
2. DF-702
2.1 Type
2.2 Functions
2.3 Paper
2.4 Particular originals
2.5 Prohibited originals
2.6 Mixed original feed chart
2.7 Machine specifications
2.8 Operating environment
2.9 Note for the Specifications
3. LU-204
3.1 Type
3.2 Paper
3.3 Machine specifications
3.4 Operating environment
3.5 Note for the Specifications
4. LU-301
4.1 Type
4.2 Paper
4.3 Machine specifications
4.4 Operating environment
4.5 Note for the Specifications
5. ZU-606
5.1 Type
5.2 Functions
5.3 Paper
5.4 Maintenance
5.5 Machine specifications
5.6 Operating environment
5.7 Note for the Specifications
6. FS-535
6.1 Type
6.2 Functions
6.3 Staple
6.4 Max
6.5 Machine specifications
6.6 Operating environment
6.7 Note for the Specifications
7. PK-521
7.1 Type
7.2 Functions
7.3 Paper
7.4 Machine specifications
7.5 Operating environment
7.6 Note for the Specifications
8. SD-512
8.1 Type
8.2 Paper
8.2.1 Saddle stitching
8.2.2 Folding
8.2.3 Tri-folding
8.3 Machine specifications
8.4 Operating environment
8.5 Consumables
8.6 Note for the Specifications
9. JS-602
9.1 Type
9.2 Functions
9.3 Paper
9.4 Machine specifications
9.5 Operating environment
9.6 Note for the Specifications
10. PI-505
10.1 Type
10.2 Functions
10.3 Paper
10.4 Machine specifications
10.5 Operating environment
10.6 Note for the Specifications
11. FS-534
11.1 Type
11.2 Functions
11.3 Paper
11.3.1 Non sort/sort/group
11.3.2 Sort offset/group offset
11.3.3 Sort staple
11.4 Machine specifications
11.5 Operating environment
11.6 Note for the Specifications
12. PK-520
12.1 Type
12.2 Functions
12.3 Paper
12.4 Machine specifications
12.5 Operating environment
12.6 Note for the Specifications
13. SD-511
13.1 Type
13.2 Paper
13.2.1 Saddle stitching/folding
13.2.2 Tri-folding
13.3 Machine specifications
13.4 Operating environment
13.5 Consumables
13.6 Note for the Specifications
14. i-Option LK-101 v3/102 v2/104 v3/105 v3/106/107/108
14.1 Available function for i-Option
14.1.1 List of advanced functions
14.1.2 Types of advanced functions
14.1.3 Activation procedures of i-Option
14.2 Web browser function
15. FK-511
15.1 Basic specifications
15.1.1 General specifications
15.1.2 Scanning section
15.1.3 Recording section
15.1.4 Line connecting section
15.1.5 Operation panel
15.2 Functional specifications
15.2.1 Dial functions
15.2.2 Transmission
15.2.3 Polling
15.2.4 Line seizure mode and telephone function
15.2.5 Message reception and record
15.2.6 Memory function
15.2.7 Various communication function
15.2.8 User lists / reports
15.2.9 Other user functions
15.3 Network fax specifications
15.3.1 Internet fax
15.3.2 IP address fax

D: OVERALL COMPOSITION
1. SYSTEM CONFIGURATION
1.1 System front view
1.2 System rear view
2. SECTION CONFIGURATION
3. PAPER PATH
3.1 Bizhub C754/C654
4. CONTROL BLOCK DIAGRAM
5. IMAGE CREATION PROCESS
6. IMAGE FORMING CONTROL
6.1 Operating conditions
6.2 Timing chart
7. PROCESS SPEED
E SERVICE TOOL
1. Bizhub C754/C654
1.1 Service material list
1.2 CE tool list
1.3 Utility tool
1.3.1 IC card information setting tool of AU-201/AU-202H/SCL-010 card reader
2. DF-702
2.1 CE tool list

F: PERIODICAL MAINTENANCE
1. Concept of periodical maintenance
2. Periodical maintenance items
2.1 Bizhub C754/C654
2.1.1 Periodical maintenance 1 (total counter; every 100,000 counts)
2.1.2 Periodical maintenance 2 (life value; every 155,000 counts or 130,000 counts *1)
2.1.3 Periodical maintenance 3 (life counter or life value; every 300,000 counts)
2.1.4 Periodical maintenance 4 (life value; every 600,000 counts)
2.1.5 Periodical maintenance 5 (life value; every 1,200,000 counts)
2.2 Option
2.2.1 Automatic document feeder (ADF)
2.2.2 LU-204/301
2.2.3 ZU-606
2.2.4 FS-535
2.2.5 SD-512
2.2.6 JS-602
2.2.7 PI-505
2.2.8 FS-534
2.2.9 SD-511
3. Periodical replacement parts list
Outline for the periodical replacement parts
(1) Standard mode (bizhub C754)
(2) Standard mode (bizhub C654)
3.1 Bizhub C754/C654
3.1.1 Periodical replacement parts list
3.1.2 Consumables list
3.2 Option
3.2.1 LU-204
3.2.2 LU-301
3.2.3 ZU-606
3.2.4 FS-535
3.2.5 SD-512
3.2.6 PI-505
3.2.7 FS-534
3.2.8 SD-511
4. Periodical cleaning parts list
4.1 Bizhub C754/C654
4.2 Option
4.2.1 ZU-606
4.2.2 FS-535
4.2.3 SD-512
4.2.4 JS-602
4.2.5 PI-505
4.2.6 FS-534
4.2.7 SD-511
5. CMS corresponding parts
5.1 CMS corresponding parts
5.2 CMS corresponding parts list
5.3 Replacing CMS corresponding parts as a set
6. Concept of parts life
6.1 Life value of consumables and parts
6.1.1 Bizhub C754/C654 Life threshold value
6.2 Conditions for life specifications values
6.3 Control causing inhibited printing for one part when an inhibited-printing event occurs in another part
6.3.1 Object parts
6.3.2 Control method
7. Periodical maintenance procedure Bizhub C754/C654
7.1 Housing section
7.1.1 Replacing the ozone filter
7.1.2 Replacing the toner filter
7.2 Write section
7.2.1 Cleaning of the print head glass
7.3 Imaging unit section
7.3.1 Replacing the imaging unit/Y,M,C
7.3.2 Replacing the drum unit/K
7.4 Charging section
7.4.1 Cleaning of the electrostatic charger
7.5 Developing section
7.5.1 Replacing the developing unit/K
7.6 Toner supply section
7.6.1 Replacing the toner cartridge
7.7 1st transfer section
7.7.1 Replacing the transfer belt unit
7.8 2nd transfer/separation section
7.8.1 Replacing the transfer roller unit
7.9 Toner collection section
7.9.1 Cleaning of the area around the waste toner collecting port
7.9.2 Replacing the waste toner box
7.10 Paper feed section
7.10.1 Replacing the tray 1 feed roller, tray 1 pick-up roller, tray 1 separation roller
7.10.2 Replacing the tray 2 feed roller, tray 2 pick-up roller, tray 2 separation roller
7.10.3 Replacing the tray 3 feed roller, tray 3 pick-up roller
7.10.4 Replacing the tray 3 separation roller
7.10.5 Replacing the tray 4 feed roller, tray 4 pick-up roller
7.10.6 Replacing the tray 4 separation roller
7.10.7 Replacing the manual bypass tray feed roller/manual bypass tray pick-up roller
7.10.8 Replacing the manual bypass tray separation roller assy
7.11 Vertical conveyance section
7.11.1 Cleaning of the paper dust remover
7.12 Registration section
7.12.1 Cleaning of the registration roller
7.13 Fusing section
7.13.1 Replacing the fusing unit
7.13.2 Cleaning of the IH coil
7.14 Duplex section
7.14.1 Cleaning of the duplex transport rollers
8. Periodical maintenance procedure DF-702
8.1 Take-up section
8.1.1 Cleaning of the pick-up roller/feed roller
8.1.2 Cleaning of the separation roller
8.1.3 Replacing the pick-up roller / feed roller
8.1.4 Replacing the separation roller
8.2 Transport section
8.2.1 Cleaning of the miscellaneous rolls
8.2.2 Cleaning of the miscellaneous rollers
8.3 Scanning section
8.3.1 Cleaning of the front side scanning guide
8.3.2 Cleaning of the reflective sensor section
9. Periodical maintenance procedure LU-204
9.1 Paper feed section
9.1.1 Replacing the pick-up roller
9.1.2 Replacing the feed roller
9.1.3 Replacing the separation roller
10. Periodical maintenance procedure LU-301
10.1 Paper feed section
10.1.1 Replacing the pick-up roller
10.1.2 Replacing the feed roller
10.1.3 Replacing the separation roller
11. Periodical maintenance procedure ZU-606
11.1 Punch section
11.1.1 Replacing the punch scraps conveyance motor (M7)
11.1.2 Replacing the punch clutch (CL1)
12. Periodical maintenance procedure FS-535
12.1 Paper exit section
12.1.1 Cleaning procedure for each rollers/each rolls
12.1.2 Cleaning of the paddle/3
12.1.3 Replacing the paddle/1 unit, paddle/2 unit
12.1.4 Replacing the paper exit roller/A
13. Periodical maintenance procedure SD-512
13.1 Paper exit section
13.1.1 Cleaning procedure for each rollers/each rolls
13.1.2 Cleaning of the exit tray transport belt
13.1.3 Cleaning of the upper paddle
13.1.4 Cleaning of the lower paddle
13.1.5 Replacing the upper paddle assy
13.1.6 Replacing the lower paddle unit
14. Periodical maintenance procedure JS-602
14.1 Paper exit section
14.1.1 Cleaning of the transport rollers/exit rollers
15. Periodical maintenance procedure PI-505
15.1 Paper feed section
15.1.1 Replacing the pick-up roller /Up and the feed roller /Up
15.1.2 Replacing the pick-up roller /Lw and the feed roller /Lw
15.1.3 Replacing the separation roller /Up and the torque limiter /Up
15.1.4 Replacing the separation roller /Lw and the torque limiter /Lw
16. Periodical maintenance procedure FS-534
16.1 Paper exit section
16.1.1 Cleaning procedure for each rollers/each rolls
16.1.2 Cleaning the paddles
16.1.3 Replacing the paddle units
17. Periodical maintenance procedure SD-511
17.1 Paper exit section
17.1.1 Cleaning procedure for each rollers/each rolls
17.1.2 Cleaning the upper paddle
17.1.3 Cleaning the lower paddle
17.1.4 Replacing the upper paddle assy
17.1.5 Replacing the lower paddle unit

G: DISASSEMBLY/REASSEMBLY
1. Disassembly/adjustment prohibited items
1.1 Paint-locked screws
1.2 Red-painted screws
1.3 Variable resistors on board
1.4 Removal of PWBs
1.5 Warnings for disassembly
1.6 Warnings / Precautions during setup or transportation
1.7 Parts not allowed to be removed
1.7.1 ZU-606
2. Units from which removing is prohibited
2.1 CCD unit
2.1.1 Reason for prohibition
2.2 PH unit
2.2.1 Reason for prohibition
2.3 Fusing unit
2.3.1 Reason for prohibition
3. Bizhub C754/C654
3.1 Disassembly/reassembly parts list
3.1.1 Exterior parts
3.1.2 Units
3.1.3 Boards
3.1.4 Motors
3.1.5 Clutches
3.1.6 Others
3.2 Disassembly/reassembly procedure (Exterior parts)
3.2.1 Upper front door
3.2.2 Lower front door
3.2.3 Control panel right cover
3.2.4 Control panel left cover
3.2.5 Control panel lower cover/1
3.2.6 Control panel lower cover/2
3.2.7 Control panel upper cover
3.2.8 Control panel hinge cover
3.2.9 Control panel unit
3.2.10 Right front cover/1
3.2.11 Right front cover/2
3.2.12 Right front cover/3
3.2.13 Upper left cover
3.2.14 Lower left cover
3.2.15 Rear left cover
3.2.16 Paper exit rear cover
3.2.17 Scanner rear cover
3.2.18 Scanner right cover
3.2.19 Scanner upper rear cover/1
3.2.20 Scanner upper rear cover/2
3.2.21 Scanner left cover
3.2.22 Scanner upper front cover
3.2.23 Scanner front cover
3.2.24 USB interface cover
3.2.25 Original glass
3.2.26 Interface cover/1
3.2.27 Interface cover/2
3.2.28 Rear right cover/1
3.2.29 Rear right cover/2
3.2.30 Manual bypass tray rear cover
3.2.31 Upper rear cover/1
3.2.32 Upper rear cover/2
3.2.33 Lower rear cover
3.2.34 Front right cover
3.2.35 Tray 1, Tray 2
3.2.36 Tray 3, Tray 4
3.3 Disassembly/reassembly procedure (Units)
3.3.1 PH unit
3.3.2 Duplex unit
3.3.3 Manual bypass tray unit
3.3.4 Tray 1 paper feed unit
3.3.5 Tray 2 paper feed unit
3.3.6 CCD unit
3.3.7 LED exposure unit
3.3.8 Hard disk
3.3.9 IH coil (FH1)
3.3.10 Intermediate transport roller assy
3.3.11 Main drive unit
3.3.12 LCC drive unit
3.4 Disassembly/reassembly procedure (Boards)
3.4.1 Scanner drive board (SCDB)
3.4.2 PH relay board (PHRYB)
3.4.3 Paper feed/transport drive board (PFTDB)
3.4.4 DC power supply (DCPU)
3.4.5 Noise filter (NF1)
3.4.6 Dehumidifier relay board (DEDB)
3.4.7 Printer control board (PRCB)
3.4.8 Dual scan image processing board (DSIPB)
3.4.9 Memory board/1 (MEMB/1), memory board/2 (MEMB/2)
3.4.10 SSD board (SSDB)
3.4.11 MFP board (MFPB)
3.4.12 ERP board (ERPB)
3.4.13 How to open PWB box
3.4.14 High voltage unit/2 (HV2)
3.4.15 High voltage unit/3 (HV3)
3.4.16 High voltage unit/1 (HV1)
3.4.17 IH power supply (IHPU)
3.4.18 IH magnetic erasing board (IHMEB)
3.4.19 Tray 1 FD paper size board (FDPSB/1), Tray 2 FD paper size board (FDPSB/2)
3.4.20 USB board
3.5 Disassembly/reassembly procedure (Motors)
3.5.1 ADU transport motor/1 (M31)
3.5.2 ADU transport motor/2 (M32)
3.5.3 Bypass lift-up motor (M28), bypass paper feed motor (M27)
3.5.4 Scanner motor (M201)
3.5.5 Waste toner transport motor (M20)
3.5.6 LCC transport motor (M25)
3.5.7 LCC vertical transport motor (M26)
3.5.8 Transfer belt motor (M1)
3.5.9 PC motor/YMC (M16)
3.5.10 Developing motor/YMC (M17)
3.5.11 2nd transfer pressure motor (M3)
3.5.12 Registration motor (M2)
3.5.13 Fusing pressure motor (M29)
3.5.14 Fusing motor (M30)
3.5.15 Switchback motor (M33)
3.5.16 Exit motor (M4)
3.5.17 PC motor/K (M18)
3.5.18 Developing motor/K (M19)
3.5.19 Tray 1 lift-up motor (M6), Tray 2 lift-up motor (M8)
3.5.20 Tray 3 lift-up motor (M23)
3.5.21 Tray 4 lift-up motor (M24)
3.5.22 Tray 1 vertical transport motor (M5)
3.5.23 Tray 2 vertical transport motor (M7)
3.5.24 Take-up motor (M22)
3.5.25 Charge cleaning motor/K (M15)
3.5.26 Cleaning brush motor (M38)
3.5.27 1st transfer pressure motor (M21)
3.5.28 Toner cartridge motor/CK (M14)
3.5.29 Toner cartridge motor/YM (M13)
3.5.30 Toner supply motor/Y (M9), toner supply motor/M (M10), toner supply motor/C (M11), toner supply motor/K (M12)G-75
3.6 Disassembly/reassembly procedure (Clutches)
3.6.1 Tray 1 paper feed clutch (CL1)
3.6.2 Tray 2 paper feed clutch 2 (CL2)
3.6.3 Horizontal transport clutch (CL3)
3.6.4 Tray 3 paper feed clutch (CL5), Tray 3 transport clutch (CL6)
3.6.5 Tray 4 paper feed clutch (CL7)
3.7 Disassembly/reassembly procedure (Others)
3.7.1 IDC sensor/Fr (IDCS/Fr), IDC sensor/Rr (IDCS/Rr)
3.7.2 Tray 3, Tray 4 lift wire
4. DF-702
4.1 Disassembly/reassembly parts list
4.1.1 Exterior parts
4.1.2 Units
4.1.3 Boards
4.1.4 Others
4.2 Disassembly/reassembly procedure (DF-702/SP-501)
4.2.1 Feed cover (DF-702)
4.2.2 Front cover (DF-702)
4.2.3 Rear cover (DF-702)
4.2.4 Document feed tray front cover (DF-702)
4.2.5 ADF (DF-702)
4.2.6 Front side glass cleaning roller unit (DF-702)
4.2.7 Back side glass cleaning roller unit (DF-702)
4.2.8 CIS module (CIS) (DF-702)
4.2.9 DF control board (DFCB) (DF-702)
4.2.10 Restriction plate positional volume (VR1) (DF-702)
4.2.11 DF power supply (DFPU) (DF-702)
4.2.12 Reading motor (M1) (DF-702)
4.2.13 Take-up motor (M2) (DF-702)
4.2.14 Registration motor (M3) (DF-702)
4.2.15 Exit motor (M4) (DF-702)
4.2.16 Reading roller pressure/retraction motor (M6) (DF-702)
4.2.17 Back side cleaning motor (M7) (DF-702)
4.2.18 Front side cleaning motor (M8) (DF-702)
4.2.19 Take-up clutch (CL1) (DF-702)
4.2.20 Take-up motor cooling fan (FM1) (DF-702)
4.2.21 Replacing the stamp unit (SP-501)
4.2.22 Replacing the stamp (SP-501)
5. Option
5.1 Disassembly/reassembly parts list
5.1.1 LU-204
5.1.2 LU-301
5.1.3 ZU-606
5.1.4 FS-535
5.1.5 PK-521
5.1.6 SD-512
5.1.7 JS-602
5.1.8 PI-505
5.1.9 FS-534
5.1.10 PK-520
5.1.11 SD-511
5.2 Disassembly/reassembly procedure (LU-204)
5.2.1 Large capacity unit (LU-204)
5.2.2 Right cover (LU-204)
5.2.3 Front cover (LU-204)
5.2.4 Rear cover (LU-204)
5.2.5 Feed cover (LU-204)
5.2.6 LU drive board (LUDB) (LU-204)
5.2.7 Lift-up motor (M1) (LU-204)
5.2.8 Paper feed motor (M2) (LU-204)
5.2.9 Transport motor (M3) (LU-204)
5.2.10 Dehumidification heater (DH) (LU-204)
5.2.11 Lift wire (LU-204)
5.3 Disassembly/reassembly procedure (LU-301)
5.3.1 Large capacity unit (LU-301)
5.3.2 Upper door (LU-301)
5.3.3 Right cover (LU-301)
5.3.4 Front cover (LU-301)
5.3.5 Rear cover (LU-301)
5.3.6 Feed cover (LU-301)
5.3.7 Lift wire (LU-301)
5.3.8 LU drive board (LUDB) (LU-301)
5.3.9 Lift-up motor (M1) (LU-301)
5.3.10 Dehumidification heater (DH) (LU-301)
5.4 Disassembly/reassembly procedure (ZU-606)
5.4.1 Rear cover (ZU-606)
5.4.2 Upper cover (ZU-606)
5.4.3 Right cover (ZU-606)
5.4.4 Front cover (ZU-606)
5.4.5 Z folding unit (ZU-606)
5.4.6 Punch unit (ZU-606)
5.4.7 Z folding/conveyance unit (ZU-606)
5.4.8 Punch motor (M4) (ZU-606)
5.4.9 Main motor (M6) (ZU-606)
5.4.10 Registration motor (M1) (ZU-606)
5.4.11 Punch shift motor (M5) (ZU-606)
5.4.12 Main motor cooling fan (FM1) (ZU-606)
5.4.13 ZU control board (ZUCB) (ZU-606)
5.4.14 Paper size detect board (PSDTB) (ZU-606)
5.5 Disassembly/reassembly procedure (FS-535)
5.5.1 Upper cover /1, Upper cover /2, Upper cover /3 (FS-535)
5.5.2 Rear cover (FS-535)
5.5.3 Rear left cover (FS-535)
5.5.4 Front left cover (FS-535)
5.5.5 Upper left cover (FS-535)
5.5.6 Right cover (FS-535)
5.5.7 Main tray (Paper exit lower tray) (FS-535)
5.5.8 Sub tray (Paper exit upper tray) (FS-535)
5.5.9 Finisher (FS-535)
5.5.10 Horizontal transport unit (FS-535)
5.5.11 Stapler unit (FS-535)
5.5.12 FS control board (FSCB) (FS-535)
5.5.13 RU control board (RUCB) (FS-535)
5.5.14 1st transport motor (M1) (FS-535)
5.5.15 2nd transport motor (M2) (FS-535)
5.5.16 Bypass transport motor (M3) (FS-535)
5.5.17 Exit roller motor (M4) (FS-535)
5.5.18 Main tray up/down motor (M5) (FS-535)
5.5.19 Paper output roller motor (M6) (FS-535)
5.5.20 Stacker transport motor (M10) (FS-535)
5.5.21 Alignment plate motor/Fr (M11)/ Alignment plate motor/Rr (M12)/ Trailing edge stopper motor (M19) (FS-535)
5.5.22 Stapler movement motor (M13) (FS-535)
5.5.23 Trailing edge paddle up/down motor (M15) (FS-535)
5.5.24 Paddle motor (M16) (FS-535)
5.5.25 Stacker plate motor (M17) (FS-535)
5.5.26 Leading edge paddle up/down motor (M18) (FS-535)
5.5.27 RU transport motor (M35) (FS-535)
5.5.28 Center staple switching gate solenoid (SD1) (FS-535)
5.5.29 Bypass switching gate solenoid (SD2) (FS-535)
5.5.30 Sub tray switching gate solenoid (SD3) (FS-535)
5.5.31 Switchback gate solenoid (SD4) (FS-535)
5.5.32 Sub tray paper exit route (FS-535)
5.5.33 Lift wire (FS-535)
5.5.34 Drive belt (FS-535)
5.5.35 Paddle/3 (FS-535)
5.6 Disassembly/reassembly procedure (PK-521)
5.6.1 Punch kit (PK-521)
5.6.2 Punch oscillating motor (M302) (PK-521)
5.7 Disassembly/reassembly procedure (SD-512)
5.7.1 Front cover (SD-512)
5.7.2 Saddle unit (SD-512)
5.7.3 Paper exit tray (SD-512)
5.7.4 Staple unit (SD-512)
5.7.5 SD drive board (SDDB) (SD-512)
5.7.6 SD transport motor (M1) (SD-512)
5.7.7 Paper receiving guide control motor (M2) (SD-512)
5.7.8 Alignment motor (M3) (SD-512)
5.7.9 Stopper drive motor (M4) (SD-512)
5.7.10 Center fold roller motor (M5) (SD-512)
5.7.11 Tri-fold guide motor (M6) (SD-512)
5.7.12 SD paddle motor (M7) (SD-512)
5.7.13 Center fold change motor (M8) (SD-512)
5.7.14 Center fold knife motor (M9) (SD-512)
5.7.15 Paper transport belt motor (M34) (SD-512)
5.7.16 Stopper solenoid (SD1) (SD-512)
5.8 Disassembly/reassembly procedure (JS-602)
5.8.1 Separator (JS-602)
5.8.2 Front cover (JS-602)
5.8.3 Rear cover (JS-602)
5.8.4 3rd entrance switching solenoid (SD404) (JS-602)
5.9 Disassembly/reassembly procedure (PI-505)
5.9.1 Upper cover (PI-505)
5.9.2 Rear cover (PI-505)
5.9.3 Operation panel cover assy (PI-505)
5.9.4 Post inserter (PI-505)
5.9.5 PI drive board (PIDB) (PI-505)
5.9.6 PI control board (PIOB) (PI-505)
5.10 Disassembly/reassembly procedure (FS-534)
5.10.1 Rear cover (FS-534)
5.10.2 Front door (FS-534)
5.10.3 Front upper cover (FS-534)
5.10.4 Finisher (FS-534)
5.10.5 Horizontal transport unit (FS-534)
5.10.6 Stapler unit (FS-534)
5.10.7 FS control board (FSCB) (FS-534)
5.10.8 RU transport motor (M1) (FS-534)
5.10.9 FNS entry transport motor (M2) (FS-534)
5.10.10 FNS discharge motor (M3) (FS-534)
5.10.11 Receving roller retraction motor (M4) (FS-534)
5.10.12 FNS paddle motor (M5) (FS-534)
5.10.13 Trailing edge stopper motor (M6) (FS-534)
5.10.14 Alignment motor/front (M7) (FS-534)
5.10.15 Alignment motor/rear (M8) (FS-534)
5.10.16 Pre-eject drive motor (M9) (FS-534)
5.10.17 Bundle eject motor (M10) (FS-534)
5.10.18 Main tray up/down motor (M11) (FS-534)
5.10.19 Paper receiving control motor (M12) (FS-534)
5.10.20 Side stapler movement motor (M13) (FS-534)
5.11 Disassembly/reassembly procedure (PK-520)
5.11.1 Punch kit (PK-520)
5.12 Disassembly/reassembly procedure (SD-511)
5.12.1 Front cover (SD-511)
5.12.2 Saddle unit (SD-511)
5.12.3 Paper exit tray (SD-511)
5.12.4 Staple unit (SD-511)
5.12.5 SD drive board (SDDB) (SD-511)
5.12.6 SD transport motor (M1) (SD-511)
5.12.7 Paper discharge control motor (M2) (SD-511)
5.12.8 Alignment motor (M3) (SD-511)
5.12.9 Stopper drive motor (M4) (SD-511)
5.12.10 Center fold roller motor (M5) (SD-511)
5.12.11 Tri-folding guide motor (M6) (SD-511)
5.12.12 SD paddle motor (M7) (SD-511)
5.12.13 Center fold guide motor (M8) (SD-511)
5.12.14 Center fold knife motor (M9) (SD-511)
5.12.15 Stopper solenoid (SD1) (SD-511)
6. COMMERCIALLY AVAILABLE PARTS
6.1 Installing the key counter
6.1.1 Configuration
6.1.2 Procedure
6.2 Installing the original size detection 2 sensor (PS205)
6.2.1 Procedure

H: CLEANING/LUBRICATION
1. Bizhub C754/C654
1.1 Cleaning parts list
1.2 Cleaning procedure
1.2.1 Transfer belt unit
1.2.2 Tray 1 feed roller, tray 1 pick-up roller, tray 1 separation roller
1.2.3 Tray 1 transport roller
1.2.4 Tray 2 feed roller, tray 2 pick-up roller, tray 2 separation roller
1.2.5 Tray 2 transport roller
1.2.6 Tray 3 feed roller, tray 3 pick-up roller
1.2.7 Tray 3 separation roller
1.2.8 Tray 3 transport roller
1.2.9 Tray 4 feed roller, tray 4 pick-up roller
1.2.10 Tray 4 separation roller
1.2.11 Tray 4 transport roller
1.2.12 Manual bypass tray feed roller
1.2.13 Manual bypass tray pick-up roller
1.2.14 Manual bypass tray separation roller
1.2.15 Intermediate transport roller
1.2.16 Original glass
1.2.17 Scanner rails
1.2.18 Mirrors
1.2.19 Lens
1.2.20 CCD sensor
2. DF-702
2.1 Cleaning parts list
2.2 Cleaning procedure
2.2.1 Back side scanning glass
2.2.2 Back side scanning guide / Back side scanning shading shaft
3. Option
3.1 Cleaning parts list
3.1.1 LU-204
3.1.2 LU-301
3.1.3 FS-535
3.1.4 PI-505
3.2 Cleaning procedure (LU-204)
3.2.1 Pick-up roller
3.2.2 Feed roller
3.2.3 Separation roller
3.2.4 Transport roller
3.3 Cleaning procedure (LU-301)
3.3.1 Pick-up roller
3.3.2 Feed roller
3.3.3 Separation roller
3.3.4 Transport roller
3.4 Cleaning procedure (FS-535)
3.4.1 paddle/1, paddle/2
3.5 Cleaning procedure (PI-505)
3.5.1 Pick-up roller /Up, feed roller /Up, separationroller /Up
3.5.2 Pick-up roller /Lw, feed roller /Lw, separationroller /Lw
3.5.3 Transport roller /Up
3.5.4 Transport roller /Lw

I: ADJUSTMENT/SETTING
1. HOW TO USE THE ADJUSTMENT/SETTING SECTION
1.1 Outline
1.2 Advance checks
2. Accessibility
2.1 Touch Panel Adjustment
2.1.1 Use
2.1.2 Procedure
2.2 Brightness Adjustment
2.2.1 Procedure
2.3 Key Repeat Start/Interval Time
2.3.1 Time To Start
2.3.2 Interval
2.4 System Auto Reset Confirmation
2.4.1 Use
2.4.2 Default setting
2.4.3 Setting item
2.5 Auto Reset Confirmation
2.5.1 Use
2.5.2 Default setting
2.5.3 Setting item
2.6 Enlarge Display Mode Confirmation
2.6.1 Use
2.6.2 Default setting
2.6.3 Setting item
2.7 Message Display Time
2.7.1 Use
2.7.2 Default setting
2.7.3 Setting item
2.8 Sound Setting
2.8.1 Sound Setting
2.8.2 Operation Confirmation Sound
2.8.3 Successful Completion Sound
2.8.4 Completed Preparation Sound
2.8.5 Caution Sound
2.9 Default Enlarge Display Settings
2.9.1 Use
2.9.2 Procedure
2.10 Double Tap Interval Settings
2.10.1 Procedure
2.11 Voice Guidance Settings
2.11.1 Voice Guidance Settings
2.11.2 Volume
2.11.3 Voice Speed
3. Counter
3.1 Meter Count
3.1.1 Meter Count
3.1.2 Copy
3.1.3 Print
3.1.4 Scan/Fax
3.1.5 Other
3.1.6 Print List
3.1.7 Coverage Rate
3.1.8 Eco Info
3.2 Display Keypad
3.2.1 Use
4. UTILITY
4.1 List of utility mode (outline)
4.2 List of utility mode (detail)
4.2.1 One-Touch/User Box Registration
4.2.2 User Settings
4.2.3 Administrator Settings
4.2.4 Other Settings
4.3 Starting/Exiting
4.3.1 Starting procedure
4.3.2 Exiting procedure
5. UTILITY (ONE-TOUCH/USER BOX REGISTRATION)
One-Touch User Box Registration-Outline
5.1 Create One-Touch destination
5.1.1 Address Book (Public)/(Personal)
5.1.2 Group
5.1.3 E-mail Settings
5.2 Create User Box
5.2.1 Public/Personal User Box
5.2.2 Bulletin Board User Box
5.2.3 Relay User Box
5.3 Limiting Access to Destinations
5.3.1 Apply Levels/Groups to Destinations
6. UTILITY (USER SETTINGS)
6.1 System Settings
6.1.1 Language Selection
6.1.2 Language Selection-Panel Keyboard Language Selection
6.1.3 Language Selection-External Keyboard Language Selection
6.1.4 Select Keyboard
6.1.5 Measurement Unit Settings
6.1.6 Paper Tray Settings
6.1.7 Auto Color Level Adjust
6.1.8 Power supply/power save settings
6.1.9 Output Settings
6.1.10 AE Level Adjustment
6.1.11 Auto Paper Select for Small Original
6.1.12 Blank Page Print Settings
6.1.13 Page Number Print Position
6.1.14 Blank Sheet Detection Level
6.1.15 Separate Scan from Platen
6.2 Custom Display Settings
6.2.1 Copier Settings
6.2.2 Scan/Fax Settings
6.2.3 User Box Settings
6.2.4 Function Display Key (Copy/Print)
6.2.5 Function Display Key (Send/Save)
6.2.6 Copy Screen
6.2.7 Fax Active Screen
6.2.8 Search Option Settings
6.3 Copier Settings
6.3.1 Auto Booklet Selection for Saddle Stitching
6.3.2 Auto Zoom for Combine/Booklet
6.3.3 Booklet Short Cut Mode
6.3.4 Auto Sort/Group Selection
6.3.5 Default Copy Settings
6.3.6 Default Enlarge Display Settings
6.3.7 When AMS Direction is Incorrect
6.3.8 Separate Scan Output Method
6.3.9 Enlargement Rotation
6.3.10 Auto Zoom (Platen)
6.3.11 Auto Zoom (ADF)
6.3.12 Specify Default Tray when APS Off
6.3.13 Select Tray for Insert Sheet
6.3.14 Tri-Fold Print Side
6.3.15 Print Jobs During Copy Operation
6.3.16 Automatic Image Rotation
6.3.17 Finishing Program
6.3.18 Card Shot Settings
6.4 Scan/Fax Settings
6.4.1 JPEG Compression Level
6.4.2 Black Compression Level
6.4.3 TWAIN Lock Time
6.4.4 Default Scan/Fax Settings
6.4.5 Default Enlarge Display Settings
6.4.6 Compact PDF/XPS Compression Level
6.4.7 Color TIFF Type
6.4.8 OCR Operation Setting
6.4.9 Graphic Outlining
6.4.10 Auto Rename Function
6.5 Printer Settings
6.5.1 Basic Settings
6.5.2 Paper Setting
6.5.3 PCL Settings
6.5.4 PS Setting
6.5.5 Security Settings
6.5.6 OOXML Print Settings
6.5.7 Layout – Combination
6.5.8 Print Reports
6.5.9 TIFF Image Paper Setting
6.6 Change Password
6.6.1 Use
6.6.2 Procedure
6.7 Change E-mail Address
6.7.1 Use
6.7.2 Procedure
6.8 Register Authentication Settings
6.8.1 Use
6.9 Synchronize User Auth
6.9.1 Use
6.9.2 Default setting
6.9.3 Setting item
6.10 Cellular Phone/PDA Setting
6.10.1 Link File Error Notification
6.10.2 Proxy Server Use
6.10.3 Print
7. UTILITY (ADMINISTRATOR SETTINGS)
Administrator Settings-Outline
7.1 System Settings-Power Supply/Power Save Settings
7.1.1 Low Power Mode Settings
7.1.2 Sleep Mode Settings
7.1.3 Power Key Setting
7.1.4 Power Save Settings
7.1.5 Enter Power Save Mode
7.1.6 Power Consumption in Sleep Mode
7.1.7 Power Saving Fax/Scan
7.1.8 Awake from Power Save Mode by Touching Control Panel
7.2 System Settings-Output Settings
7.2.1 Print/Fax Output Settings
7.2.2 Output Tray Settings
7.2.3 Shift Output Each Job
7.3 System Settings-Date/Time Settings
7.3.1 Use
7.3.2 Procedure
7.4 System Settings-Daylight Saving Time
7.4.1 Use
7.4.2 Default setting
7.4.3 Setting item
7.5 System Settings-Weekly Timer Settings
7.5.1 Weekly Timer ON/OFF Settings
7.5.2 Time Settings
7.5.3 Date Settings
7.5.4 Select Time for Power Save
7.5.5 Password for Non-Business Hours
7.5.6 Tracking Function Settings
7.5.7 Display ON/OFF Time
7.6 System Settings-Restrict User Access
7.6.1 Copy Program Lock Settings
7.6.2 Delete Saved Copy Program
7.6.3 Restrict Access to Job Settings
7.6.4 Restrict Operation
7.7 System Settings-Expert Adjustment
7.7.1 AE Level Adjustment
7.7.2 Printer Adjustment-Leading Edge Adjustment
7.7.3 Printer Adjustment-Centering
7.7.4 Printer Adjustment-Leading Edge Adjustment: Duplex Side 2
7.7.5 Printer Adjustment-Centering: Duplex 2nd Side
7.7.6 Printer Adjustment-Erase Leading Edge
7.7.7 Printer Adjustment-Vertical Adjustment
7.7.8 Printer Adjustment-Media Adjustment
7.7.9 Finisher Adjustment-Center Staple Position
7.7.10 Finisher Adjustment-Half-Fold Position
7.7.11 Finisher Adjustment-1st Tri-Fold Position Adjustment/2nd Tri-Fold Position Adjustment
7.7.12 Finisher Adjustment-Tri-Fold Output Setting
7.7.13 Finisher Adjustment-Punch Vertical Position Adjustment
7.7.14 Finisher Adjustment-Punch Horizontal Position Adjustment
7.7.15 Finisher Adjustment-Punch Regist Loop Size Adjustment
7.7.16 Finisher Adjustment-Punch Edge Sensor Adjustment
7.7.17 Finisher Adjustment-Vertical Punch (Z-Fold) Position Adjustment
7.7.18 Finisher Adjustment-Horizontal Punch (Z-Fold) Position Adjustment
7.7.19 Finisher Adjustment-1st Z-Fold Position Adjustment/2nd Z-Fold Position Adjustment
7.7.20 Finisher Adjustment-Punch Unit Size Detect Sensor
7.7.21 Finisher Adjustment-Post Inserter Tray Size Adjustment
7.7.22 Density Adjustment
7.7.23 Image Stabilization
7.7.24 Paper Separation Adjustment
7.7.25 Color Registration Adjust
7.7.26 Gradation Adjustment
7.7.27 Scanner Area
7.7.28 Scanner Area-Scanner Adjustment: Leading Edge
7.7.29 Scanner Area-Scanner Adjustment: Centering
7.7.30 Scanner Area-Horizontal Adjustment
7.7.31 Scanner Area-Vertical Adjustment
7.7.32 ADF Adjustment
7.7.33 Line Detection-Prior Detection Setting (Front Side, Back Side)
7.7.34 Line Detection-Feed Cleaning Settings
7.7.35 Trail Edge Adjust
7.7.36 User Paper Settings
7.7.37 Erase Adjustment-Non-Image Area Erase Operation Settings
7.7.38 PS Designer Settings
7.8 System Settings-List/Counter
7.8.1 Management List
7.8.2 Paper Size/Type Counter
7.8.3 Meter Counter List
7.8.4 Check Consumables List
7.8.5 Fax Activity Summary Information
7.8.6 TX Operation Log Output
7.9 System Settings-Reset Settings
7.9.1 System Auto Reset
7.9.2 Auto Reset
7.9.3 Job Reset
7.9.4 Default Basic/Enlarge Display Common Setting
7.10 System Settings-User Box Settings
7.10.1 Delete Unused User Box
7.10.2 Delete Secure Print Documents
7.10.3 Auto Delete Secure Document
7.10.4 Encrypted PDF Delete Time
7.10.5 ID & Print Delete Time
7.10.6 Document Hold Setting
7.10.7 External Memory Function Settings
7.10.8 Allow/Restrict User Box
7.10.9 ID & Print Delete after Print Setting
7.10.10 Document Delete Time Setting
7.11 System Settings-Standard Size Setting
7.11.1 Original Glass Original Size Detect
7.11.2 81/2 – 14/Foolscap Size Detection
7.11.3 Foolscap Size Setting
7.11.4 ADF Size Detection
7.12 System Settings-Stamp Settings
7.12.1 Header/Footer Settings
7.12.2 Fax TX Settings
7.13 System Settings-Blank Page Print Settings
7.13.1 Use
7.13.2 Default setting
7.13.3 Setting item
7.14 System Settings-Registered Key Settings
7.14.1 Use
7.14.2 Procedure
7.15 System Settings-Job Priority Operation Settings
7.15.1 Fax RX Job Priority
7.15.2 Skip Job (Fax)
7.15.3 Skip Job (Copy, Print)
7.16 System Settings-Default Bypass Paper Type Setting
7.16.1 Use
7.16.2 Procedure
7.17 System Settings-Page Number Print Position
7.17.1 Use
7.17.2 Procedure
7.18 System Settings-Preview Settings
7.18.1 Original Direction Confirmation Screen
7.18.2 Realtime Preview
7.18.3 Preview Display Conditions (Standard Application)
7.18.4 Preview Display Conditions (Registered Application)
7.19 System Settings-Enlarge Display Settings
7.19.1 Display Default Setting
7.19.2 Enlarge Display Setting
7.19.3 Apply Basic Setting to Enlarge Display
7.20 System Settings-Scan File Name Settings
7.20.1 Function Mode Initial
7.20.2 Supplementary File Name
7.21 System Settings-PDF Settings
PDF Settings
7.21.1 PDF/A Default Settings
7.21.2 PDF Web Optimization Default Settings
7.21.3 Searchable PDF Settings
7.22 System Settings-Set Paper Name by User
7.22.1 Set Paper Name by User
7.23 System Settings-Custom Display Settings
7.23.1 Main Menu Default Settings
7.23.2 Main Menu Display Settings
7.23.3 Custom Function Pattern Selection
7.23.4 User/Admin Function Permissions
7.23.5 Function Display Key Permission Setting-Copy/Print
7.23.6 Function Display Key Permission Setting-Send/Save
7.23.7 Temporarily Change Language Setting
7.24 Administrator/Machine Settings
7.24.1 Administrator Registration
7.24.2 Input Machine Address
7.25 One-Touch/User Box Registration-Create One-Touch Destination
7.25.1 Address Book(Public)/(Personal)
7.25.2 Group
7.25.3 E-Mail Settings
7.26 One-Touch/User Box Registration-Create User Box
7.26.1 Public/Personal User Box
7.26.2 Bulletin Board User Box
7.26.3 Relay User Box
7.26.4 Annotation User Box
7.27 One-Touch/User Box Registration-One-Touch/User Box Registration List
7.27.1 Address Book List
7.27.2 Group List
7.27.3 Program List
7.27.4 E-Mail Subject/Text List
7.28 One-Touch/User Box Registration-Maximum Number of User Boxes
7.28.1 Use
7.28.2 Procedure
7.29 User Authentication/Account Track-General Settings
7.29.1 User Authentication
7.29.2 Public User Access
7.29.3 Prohibited Function Login Setting
7.29.4 Account Track
7.29.5 Account Track Input Method
7.29.6 Synchronize User Authentication & Account Track
7.29.7 When # of Jobs Reach Maximum
7.29.8 Number of User Counters Assigned
7.29.9 Ticket Hold Time Setting
7.29.10 Scanner Settings
7.29.11 LDAP-IC Card Authentication Setting
7.30 User Authentication/Account Track-User Authentication Settings
7.30.1 Administrative Settings
7.30.2 User Registration
7.30.3 User Counter
7.31 User Authentication/Account Track-Account Track Settings
7.31.1 Account Track Registration
7.31.2 Account Track Counter
7.32 User Authentication/Account Track-Print without Authentication
7.32.1 Use
7.32.2 Default setting
7.32.3 Setting item
7.33 User Authentication/Account Track-Print Counter List
7.33.1 Use
7.33.2 Procedure
7.34 User Authentication/Account Track-External Server Settings
7.34.1 External Server Settings
7.35 User Authentication/Account Track-Limiting Access to Destinations
7.35.1 Create Group
7.35.2 Apply Levels/Groups to Destinations
7.35.3 Apply Levels/Groups to Users
7.36 User Authentication/Account Track-Authentication Device Settings
7.36.1 General Settings
7.36.2 Logoff Settings
7.37 User Authentication/Account Track-User/Account Common Setting
7.37.1 Logout Confirmation Screen Display Setting
7.37.2 Single Color > 2 Color Output Management
7.37.3 Counter Remote Control
7.38 User Authentication/Account Track-Scan to Home Settings
7.38.1 Use
7.38.2 Default setting
7.38.3 Setting item
7.39 User Authentication/Account Track-Scan to Authorized Folder Settings
7.39.1 Use
7.39.2 Default setting
7.39.3 Setting item
7.40 User Authentication/Account Track-Print Simple Auth
7.40.1 Authentication Setting
7.40.2 Register Authentication Server
7.41 Network Settings-TCP/IP Settings
7.41.1 TCP/IP Settings
7.41.2 IPv4 Settings
7.41.3 IPv6 Settings
7.41.4 DNS Host
7.41.5 DNS Domain
7.41.6 DNS Server Settings (IPv4)
7.41.7 DNS Server Settings (IPv6)
7.41.8 IPsec Settings
7.41.9 IPsec Settings-IPsec Settings-IKEv1 Settings
7.41.10 IPsec Settings-IPsec Settings-IKEv2 Settings
7.41.11 IPsec Settings-IPsec Settings-IPsec SA Settings
7.41.12 IPsec Settings-IPsec Settings-Peer
7.41.13 IPsec Settings-IPsec Settings-Protocol Setting
7.41.14 IPsec Settings-Enable IPsec
7.41.15 IPsec Settings-Communication Check
7.41.16 IP Filtering (Permit Access)
7.41.17 IP Filtering (Deny Access)
7.41.18 RAW Port Number
7.41.19 LLMNR Setting
7.42 Network Settings-NetWare Settings
7.42.1 IPX Settings
7.42.2 NetWare Print Settings
7.42.3 P Server Settings: Print Server Name/Print Server Password
7.42.4 P Server Settings: Polling Interval
7.42.5 P Server Settings: NDS/Bindery Setting
7.42.6 P Server Settings: File Server Name
7.42.7 P Server Settings: NDS Context Name
7.42.8 P Server Settings: NDS Tree Name
7.42.9 Nprinter/Rprinter Settings: Print Server Name
7.42.10 Nprinter/Rprinter Settings: Printer Number
7.42.11 User Authentication Setting (NDS)
7.43 Network Settings-HTTP Server Settings
7.43.1 HTTP Server Settings
7.43.2 PSWC Settings
7.43.3 IPP Settings
7.43.4 Accept IPP jobs
7.43.5 Support Information
7.43.6 Printer Information
7.43.7 IPP Authentication Settings
7.43.8 General Settings
7.43.9 User Name
7.43.10 Password
7.43.11 realm
7.44 Network Settings-FTP Settings
7.44.1 FTP TX Settings
7.44.2 FTP TX Settings: Proxy Server Address
7.44.3 FTP TX Settings: Proxy Server Port Number
7.44.4 FTP TX Settings: Port No
7.44.5 FTP TX Settings: Connection Timeout
7.44.6 FTP Server Settings
7.44.7 FTP Server Settings-Deny Reception Command
7.44.8 FTP Server Settings-PORT Command Enhanced Security
7.45 Network Settings-SMB Settings
SMB Setting
7.45.1 Client Settings
7.45.2 Print Settings
7.45.3 Print Settings: NetBIOS Name
7.45.4 Print Settings: Print Service Name
7.45.5 Print Settings: Workgroup
7.45.6 WINS Settings
7.45.7 WINS Settings: Automatic Retrieval Settings
7.45.8 WINS Settings: WINS Server Address 1, 2
7.45.9 WINS Settings: Node Type Setting
7.45.10 Direct Hosting Setting
7.46 Network Settings-LDAP Settings
7.46.1 Enabling LDAP
7.46.2 Setting Up LDAP
7.46.3 Setting Up LDAP-LDAP Server Name
7.46.4 Setting Up LDAP-Max
7.46.5 Setting Up LDAP-Timeout
7.46.6 Setting Up LDAP-Initial Setting for Search Details
7.46.7 Setting Up LDAP-Change Search Attribute
7.46.8 Setting Up LDAP-Search
7.46.9 Setting Up LDAP-Check Connection
7.46.10 Setting Up LDAP-Reset All Settings
7.46.11 Setting Up LDAP-Server Address
7.46.12 Setting Up LDAP-Search Base
7.46.13 Setting Up LDAP-SSL Setting
7.46.14 Setting Up LDAP-Port Number
7.46.15 Setting Up LDAP-Port Number (SSL)
7.46.16 Setting Up LDAP-Certificate Verification Level Settings
7.46.17 Setting Up LDAP-Authentication Type
7.46.18 Setting Up LDAP-Select Server Authentication Method
7.46.19 Setting Up LDAP-Referral Setting
7.46.20 Setting Up LDAP-Login Name
7.46.21 Setting Up LDAP-Password
7.46.22 Setting Up LDAP-Domain Name
7.46.23 Setting Up LDAP-Search Attributes Authentication
7.46.24 Setting Up LDAP-Search Attribute(s)
7.46.25 Default LDAP Server Setting
7.46.26 Default Search Result Display Setting
7.47 Network Settings-E-Mail Settings-E-Mail TX (SMTP)
7.47.1 E-Mail TX (SMTP)
7.47.2 Scan to E-mail
7.47.3 Status Notification
7.47.4 Total Counter Notification
7.47.5 SMTP Server Address
7.47.6 Binary Division
7.47.7 Divided Mail Size
7.47.8 Connection Timeout
7.47.9 Server Capacity
7.47.10 SSL/TLS Settings
7.47.11 Port No
7.47.12 Port Number (SSL)
7.47.13 Certificate Verification Level Settings
7.47.14 Detail Settings: SMTP Authentication
7.47.15 Detail Settings: POP Before SMTP Authentication
7.47.16 Detail Settings: POP Before SMTP Time
7.48 Network Settings-E-Mail Settings-E-Mail RX (POP)
7.48.1 E-Mail RX (POP)
7.48.2 POP Server Address
7.48.3 Connection Timeout
7.48.4 SSL Setting
7.48.5 Port No
7.48.6 Port Number (SSL)
7.48.7 Certificate Verification Level Settings
7.48.8 Login Name
7.48.9 Password
7.48.10 APOP Authentication
7.48.11 Check for New Messages
7.48.12 Polling Interval
7.49 Network Settings-E-Mail Settings-S/MIME Communication Settings
7.49.1 S/MIME Communication Settings
7.49.2 Digital Signature
7.49.3 E-Mail Text Encryption Method
7.49.4 Print S/MIME Information
7.49.5 Automatically Obtain Certificates
7.49.6 Certificate Verification Level Settings
7.49.7 Digital Signature Type
7.50 Network Settings-SNMP Settings
7.50.1 SNMP Settings
7.50.2 UDP Port Number
7.50.3 SNMP v1/v2c Settings
7.50.4 SNMP v3 Settings
7.50.5 TRAP Setting
7.50.6 TRAP Setting When Authentication failed
7.51 Network Settings-AppleTalk Settings
7.51.1 AppleTalk Settings
7.51.2 Printer Name
7.51.3 Zone Name
7.51.4 Current Zone
7.52 Network Settings-Bonjour Setting
7.52.1 Bonjour Setting
7.52.2 Bonjour Name
7.53 Network Settings-TCP Socket Settings
7.53.1 TCP Socket
7.53.2 TCP Socket (ASCII Mode)
7.54 Network Settings-Network Fax Settings
7.54.1 Network Fax Function Settings
7.54.2 SMTP TX Settings
7.54.3 SMTP RX Settings
7.55 Network Settings-WebDAV Settings-WebDAV Client Settings
7.55.1 WebDAV Client Setting
7.55.2 Proxy Server Address
7.55.3 Proxy Server Port Number
7.55.4 User Name
7.55.5 Password
7.55.6 Chunk Transmission
7.55.7 Connection Timeout
7.55.8 Server Auth
7.55.9 Certificate Verification Level Settings
7.56 Network Settings-WebDAV Settings-WebDAV Server Settings
7.56.1 WebDAV Server Settings
7.56.2 SSL Setting
7.56.3 Password Setting
7.57 Network Settings-WebDAV Settings-Proxy Setting for Remote Access
7.57.1 Proxy Setting for Remote Access
7.58 Network Settings-DPWS Settings-DPWS Common Settings
7.58.1 Friendly Name
7.58.2 Publication Service
7.58.3 Enable SSL
7.58.4 Certificate Verification Level Settings
7.59 Network Settings-DPWS Settings-DPWS Extension Settings
DPWS Extension Settings
7.59.1 Enable Proxy
7.59.2 Register Proxy
7.60 Network Settings-DPWS Settings-Printer Settings
7.60.1 Printer Settings
7.60.2 Printer Name
7.60.3 Printer Location
7.60.4 Printer Information
7.61 Network Settings-DPWS Settings-Scanner Settings
7.61.1 Scanner Settings
7.61.2 Scanner Name
7.61.3 Scanner Location
7.61.4 Scanner Information
7.61.5 Connection Timeout
7.62 Network Settings-Distributed Scan Settings
7.62.1 Distributed Scan Settings
7.63 Network Settings-Detail Settings-Device Setting
7.63.1 MAC Address
7.63.2 Network Speed
7.63.3 LLTD Setting
7.64 Network Settings-Detail Settings-Time Adjustment Setting
7.64.1 Time Adjustment Setting
7.64.2 Auto IPv6 Retrieval
7.64.3 NTP Server Setting
7.64.4 Auto Time Adjustment
7.64.5 Polling Interval
7.65 Network Settings-Detail Settings-Status Notification Setting
7.65.1 Register Notification Address (IP Address)
7.65.2 Register Notification Address (IPX Address)
7.65.3 Register Notification Address (E-mail Address)
7.66 Network Settings-Detail Settings-Total Counter Notification Settings
7.66.1 Notification Schedule Setting
7.66.2 Notification Address Setting
7.66.3 Model Name
7.66.4 Send Now
7.67 Network Settings-Detail Settings-PING Confirmation
7.67.1 Use
7.67.2 Procedure
7.68 Network Settings-Detail Settings-SLP Setting
7.68.1 Use
7.68.2 Default setting
7.68.3 Setting item
7.69 Network Settings-Detail Settings-LPD Setting
7.69.1 Use
7.69.2 Default setting
7.69.3 Setting item
7.70 Network Settings-Detail Settings-Prefix/Suffix Setting
7.70.1 ON/OFF Setting
7.70.2 Prefix/Suffix Setting
7.71 Network Settings-Detail Settings-Error Code Display Setting
7.71.1 Use
7.71.2 Default setting
7.71.3 Setting item
7.72 Network Settings-IEEE802.1X Authentication Settings
7.72.1 IEEE802.1X Authentication Settings
7.72.2 Auth
7.72.3 Reset Job Settings
7.72.4 Certificate Verification Level Settings
7.73 Network Settings-Web Browser Setting
7.73.1 Use
7.73.2 Default setting
7.73.3 Setting item
7.74 Network Settings-Bluetooth Setting
7.74.1 Use
7.74.2 Default setting
7.74.3 Setting item
7.75 Network Settings-Single Sign-on Setting
Single Sign-on Setting
7.75.1 Domain Login Setting
7.75.2 Applications and Settings
7.75.3 Auto Log Out Time
7.76 Network Settings-IWS Settings
7.76.1 IWS Settings
7.77 Network Settings-Remote Panel Settings
Remote Panel Settings
7.77.1 Server Settings
7.77.2 Client Settings
7.78 Network Settings-Internet ISW Settings
7.78.1 Update Firmware at Specified Time
7.78.2 HTTP Server Settings
7.78.3 FTP Server Settings
7.78.4 Firmware Update Parameters
7.79 Copier Settings
7.79.1 Auto Zoom (Platen)
7.79.2 Auto Zoom (ADF)
7.79.3 Specify Default Tray when APS OFF
7.79.4 Print Jobs During Copy Operation
7.79.5 Tri-Fold Print Side
7.79.6 Automatic Image Rotation
7.80 Printer Settings
7.80.1 USB Timeout
7.80.2 Network Timeout
7.80.3 Print XPS/OOXML Errors
7.80.4 Assign Account to Acquire Device Info
7.81 Fax Settings
7.81.1 Header Information
7.81.2 Header/Footer Position
7.81.3 Line Parameter Setting
7.81.4 TX/RX Settings
7.81.5 Function Settings-Function ON/OFF Setting
7.81.6 Function Settings-Memory RX Setting
7.81.7 Function Settings-Closed Network RX
7.81.8 Function Settings-Forward TX Setting
7.81.9 Function Settings-Incomplete TX Hold
7.81.10 Function Settings-PC-Fax Permission Setting
7.81.11 Function Settings-PC-Fax RX Setting
7.81.12 Function Settings-TSI User Box Setting
7.81.13 PBX Connection Setting
7.81.14 Report Settings
7.81.15 Job Settings List
7.81.16 Multi Line Settings-Line Parameter Setting
7.81.17 Multi Line Settings-Function Settings
7.81.18 Multi Line Settings-Multi Line Settings
7.81.19 Multi Line Settings-Sender Fax No
7.81.20 Network Fax Settings-Black Compression Level
7.81.21 Network Fax Settings-Color/Grayscale Multi-Value Compression Method
7.81.22 Network Fax Settings-Internet Fax Self Rx Ability
7.81.23 Network Fax Settings-Internet Fax Advanced Settings
7.81.24 Network Fax Settings-IP Address Fax Operation Settings
7.81.25 Fax Print Quality Settings
7.82 System Connection
7.82.1 OpenAPI Settings-Access Setting
7.82.2 OpenAPI Settings-SSL/Port Settings
7.82.3 OpenAPI Settings-Authentication
7.82.4 OpenAPI Settings-External Application Connection
7.82.5 Call Remote Center
7.82.6 Prefix/Suffix Automatic Setting
7.82.7 Printer Information
7.82.8 Cellular Phone/PDA Setting
7.83 Security Settings-Administrator Password
7.83.1 Use
7.83.2 Procedure
7.84 Security Settings-User Box Administrator Setting
7.84.1 Use
7.84.2 Default setting
7.84.3 Setting item
7.85 Security Settings-Administrator Security Levels
7.85.1 Use
7.85.2 Default setting
7.85.3 Setting item
7.86 Security Settings-Security Details
7.86.1 Password Rules
7.86.2 Prohibited Functions When Authentication Error
7.86.3 Confidential Document Access Method
7.86.4 Manual Destination Input
7.86.5 Print Data Capture
7.86.6 Job Log Settings
7.86.7 Restrict Fax TX
7.86.8 Personal Data Security Settings
7.86.9 Hide Personal Information (MIB)
7.86.10 Display Activity Log
7.86.11 Initialize
7.86.12 Secure Print Only
7.86.13 Copy Guard
7.86.14 Password Copy
7.86.15 Web browser contents access
7.86.16 TX Operation Log
7.86.17 Export Debug Log
7.87 Security Settings-Enhanced Security Mode
7.87.1 Use
7.87.2 Default setting
7.87.3 Setting item
7.88 Security Settings-HDD Settings
7.88.1 Check HDD Capacity
7.88.2 Overwrite HDD Data
7.88.3 Overwrite All Data
7.88.4 HDD Lock Password
7.88.5 Format HDD
7.88.6 HDD Encryption Setting
7.88.7 Debug Log Encryption Settings
7.89 Security Settings-Function Management Settings
7.89.1 Usage Settings for Each Function
7.89.2 Maximum Job Allowance
7.89.3 Network Function Usage Settings
7.90 Security Settings-Stamp Settings
7.90.1 Apply Stamps
7.90.2 Delete Registered Stamp
7.91 Security Settings-Image Log Transfer Settings
7.91.1 Image Log Transfer Settings
7.91.2 Image Log Transfer Settings (Type1)
7.91.3 Image Log Transfer Settings (Type2)
7.92 Security Settings-Driver Password Encryption Setting
7.92.1 Use
7.92.2 Default setting
7.92.3 Setting item
7.93 Security Settings-FIPS Settings
7.93.1 FIPS Settings
7.94 License Settings
7.94.1 Get Request Code
7.94.2 Install License
7.94.3 List of Enabled Functions
7.95 Voice Guidance Settings-Voice Guidance
7.95.1 Use
7.95.2 Default setting
7.95.3 Setting item
7.96 OpenAPI Authentication Management Setting
7.96.1 Restriction Code Settings
7.97 External Memory Backup
7.97.1 Import/Export
7.98 Remote Access Setting
7.98.1 Import/Export User Data
8. UTILITY (OTHER SETTINGS)
8.1 Banner Printing
8.1.1 Use
8.1.2 Procedure
8.2 My Panel Settings
8.2.1 Use
8.2.2 Procedure
8.3 Device Information
8.3.1 Use
8.3.2 Procedure
8.4 Remote Panel Operation
8.4.1 Use
9.  ADJUSTMENT ITEM LIST
9.1 Replace feed roller, pick-up roller, separation roller
9.2 Install LCT
9.3 Replace IU/drum unit
9.4 Replace transfer belt unit
9.5 Replace fusing unit
9.6 Replace PH unit
9.7 Replace printer control board
9.8 Replace MFP board
9.9 Replace DF control board
9.10 Replace IDC sensor/Fr, IDC sensor/Rr
9.11 Replace hard disk
9.12 Replace control panel unit
9.13 Add key counter
9.14 Execute initialize
9.15 Execute add
9.16 Firmware rewriting
9.17 Mount the fax board
9.18 Replace CCD unit
9.19 Replace original size sensor
9.20 Replace scanner motor
9.21 Replace scanner home sensor
9.22 Replace original glass
9.23 Replace DF-702
9.24 Replace CIS module
10. LIST OF SERVICE MODE
10.1 List of service mode (outline)
10.2 List of service mode (detail)
10.2.1 Machine
10.2.2 Imaging Process Adjustment
10.2.3 CS Remote Care
10.2.4 System 1
10.2.5 System 2
10.2.6 Counter
10.2.7 List Output
10.2.8 State Confirmation
10.2.9 Test Mode
10.2.10 ADF
10.2.11 FAX
10.2.12 Finisher
10.2.13 Internet ISW
11. SERVICE MODE
11.1 Starting/Setting/Exiting
11.1.1 Starting procedure
11.1.2 Setting procedure
11.1.3 Exiting procedure
11.2 Date/Time Input mode
11.2.1 Use
11.2.2 Procedure
11.3 Machine
11.3.1 Trail Edge Color Alignment Adj
11.3.2 Fusing Temperature
11.3.3 Fusing Transport Speed
11.3.4 Printer Area
11.3.5 Scan Area
11.3.6 Printer Reg
11.3.7 Color Registration Adjustment
11.3.8 Print Head Skew Adj
11.3.9 LD adjustment
11.3.10 Manual Bypass Tray Width Adj
11.3.11 Lead Edge Erase Adjustment
11.3.12 Non-Image Area Erase Check
11.3.13 ADF Scan Glass Contamination
11.3.14 Thick Paper Interval Setting
11.3.15 PPM Control Choice
11.4 Firmware Version
11.4.1 Use
11.4.2 Procedure
11.5 Imaging Process Adjustment
11.5.1 Gradation Adjust
11.5.2 Transfer Belt
11.5.3 Max Image Density Adj
11.5.4 TCR Level Setting
11.5.5 Image Background Adj
11.5.6 Transfer Voltage Fine Adj
11.5.7 Stabilizer
11.5.8 Thick Paper Density Adjustment
11.5.9 Paper separation adjustment
11.5.10 Manual Toner Add
11.5.11 Monochrome Density Adjustment
11.5.12 Grad/Dev AC Bias V Selection
11.5.13 Removable Voltage Adjust
11.5.14 Transferbelt Cleaner Cleaning
11.5.15 Black Adjust
11.6 CS Remote Care (Outlines)
11.7 Setting up the CS Remote Care
11.7.1 Using the telephone line modem
11.7.2 Using the Fax line modem
11.7.3 Using E-mail
11.7.4 When using a WebDAV server in http communication
11.8 Software SW setting for CS Remote Care
11.8.1 Input procedure
11.8.2 List of software SW for CS Remote Care
11.8.3 SW No. 01
11.8.4 SW No. 02
11.8.5 SW No. 03
11.8.6 SW No. 04
11.8.7 SW No. 05
11.8.8 SW No. 06
11.8.9 SW No. 07
11.8.10 SW No. 08
11.8.11 SW No. 09
11.8.12 SW No. 10
11.8.13 SW No. 11
11.8.14 SW No. 12
11.8.15 SW No. 14
11.8.16 SW No. 15
11.8.17 SW No. 18
11.8.18 SW No. 21
11.8.19 SW No. 22
11.8.20 SW No. 23
11.9 Setup confirmation
11.10 Calling the maintenance
11.10.1 When starting the maintenance
11.10.2 When finishing the maintenance
11.11 Calling the center from the administrator
11.12 Checking the transmission log
11.13 Detail on settings for CS Remote Care
11.13.1 Maintenance/Default Settings – System Selection
11.13.2 Maintenance/Default Settings – ID Code
11.13.3 Maintenance/Default Settings – Detail Setting
11.13.4 Maintenance/Default Settings – Server Setting (E-Mail1 or E-mail2 is selected.)
11.13.5 Maintenance/Default Settings – Server Setting (http1 or http2 is selected)
11.13.6 Product Auth
11.13.7 Import/Export Settings
11.14 System 1
11.14.1 Marketing Area
11.14.2 Tel/Fax Number
11.14.3 Serial Number
11.14.4 Sleep ON/OFF Choice Setting
11.14.5 Foolscap Size Setting
11.14.6 Original Size Detection
11.14.7 Install Date
11.14.8 Initialization-Clear All Data
11.14.9 Initialization-Clear Individual Data
11.14.10 Initialization-System Error Clear
11.14.11 Charging CH cleaning
11.14.12 Problem Unit Isolation Set
11.14.13 Post card transfer table
11.14.14 Warmup
11.14.15 Machine State LED Setting
11.14.16 TP Level
11.15 System 2
11.15.1 HDD
11.15.2 Image Controller Setting
11.15.3 Option Board Status
11.15.4 Consumable Life Reminder
11.15.5 Unit Change
11.15.6 Software Switch Setting
11.15.7 CCD Calibration
11.15.8 LCT (Built-in) Size Settings
11.15.9 LCT Paper Size Setting
11.15.10 Line Mag Setting
11.15.11 Data Capture
11.15.12 ADF Scan Glass Contamin
11.15.13 Stamp
11.15.14 Network Fax Settings
11.15.15 Image Stabilization Setting
11.15.16 User Paper Settings
11.15.17 Coverage Rate Screen
11.15.18 JAM Code Display Setting
11.15.19 BootUp Screen
11.15.20 Install Data
11.15.21 Bluetooth Settings
11.15.22 CIS Image Adjustment
11.15.23 Display Eco Index
11.15.24 Internal Error
11.15.25 Acquiring Settings
11.15.26 Driver Install
11.15.27 IWS Settings
11.15.28 Custom Pattern
11.16 Counter
11.16.1 Common procedure
11.16.2 Life
11.16.3 Service Call
11.16.4 Section Service Call
11.16.5 Warning
11.16.6 Maintenance
11.16.7 Service Total
11.16.8 Counter of Each Mode
11.16.9 Service Call History (Data)
11.16.10 ADF Paper Pages
11.16.11 Paper Jam History
11.16.12 Fax Connection Error
11.16.13 ADF Scan Glass Contamin
11.16.14 Parts Counter (Fixed)
11.16.15 Jam
11.16.16 Section JAM
11.17 List Output
11.17.1 Batch List CSV Output
11.17.2 Machine Management List
11.17.3 Adjustment List
11.17.4 Parameter List
11.17.5 Service Parameter
11.17.6 Protocol Trace
11.17.7 Fax Setting List
11.17.8 Fax Analysis List
11.18 State Confirmation
11.18.1 Sensor Check
11.18.2 Table Number
11.18.3 Level History1
11.18.4 Level History 2
11.18.5 Temp
11.18.6 CCD Check
11.18.7 Memory/HDD Adj
11.18.8 Memory/HDD State
11.18.9 Color Regist
11.18.10 Load Check
11.18.11 Adjustment Data List
11.19 Test Mode
11.19.1 Procedure for test pattern output
11.19.2 Gradation Pattern
11.19.3 Halftone Pattern
11.19.4 Lattice Pattern
11.19.5 Solid Pattern
11.19.6 Color Sample
11.19.7 8 Color Solid Pattern
11.19.8 CMM Pattern
11.19.9 Paper Passage Test
11.19.10 Fax Test-Signal Send Test
11.19.11 Fax Test-Signal Receive Test
11.19.12 Fax Test-NCU TEST
11.20 ADF
11.20.1 Original Stop Position
11.20.2 Registration Loop Adj
11.20.3 Auto Stop Position Adjustment
11.20.4 Paper Passage
11.20.5 Sensor Check
11.20.6 Original Tray Width
11.20.7 Read Pos Adj
11.20.8 FD-Mag
11.20.9 Scanning Light Adjustment
11.20.10 Mixed original size adjustment
11.20.11 Home Read Position Adjust
11.20.12 FD-Mag
11.20.13 Main Scanning Direction Zoom
11.21 FAX setting (Line1)
11.21.1 Modem/NCU
11.21.2 Network
11.21.3 System
11.21.4 Fax File Format
11.21.5 Communication
11.21.6 List Output
11.21.7 Function Parameter
11.21.8 Initialization
11.22 FAX setting (Line2)
11.22.1 Modem/NCU
11.22.2 Network
11.22.3 Communication
11.22.4 Initialization
11.23 FAX setting (Address parameter list: for main line and sub line)
11.23.1 0b000*
11.23.2 0b001*
11.23.3 0b002*
11.23.4 0b003*
11.23.5 0b004*, 0b005*
11.23.6 0b006*
11.23.7 0e000*
11.23.8 0e001*
11.23.9 0e002*
11.23.10 0e003*
11.23.11 0e004*
11.23.12 0e005*
11.23.13 12000*
11.23.14 13000*
11.23.15 13003*
11.23.16 13004*
11.23.17 13005*
11.23.18 13006*
11.23.19 13007*
11.23.20 13008*
11.24 FAX setting (Address parameter list: for main line)
11.24.1 0e009*
11.24.2 0e00a*
11.24.3 0e00b*
11.24.4 0e00c*
11.24.5 0e00d*
11.24.6 0e00e*
11.24.7 0e00f*
11.24.8 0e010*
11.24.9 0e011*
11.24.10 0f000*
11.24.11 0f001*
11.24.12 10000*
11.24.13 10001*
11.25 FAX setting (Address parameter list: for sub line)
11.25.1 0e01a*
11.25.2 0e01b*
11.25.3 0e01c*
11.25.4 0e01d*
11.25.5 0e01e*
11.25.6 0e01f*
11.25.7 0e020*
11.25.8 0e021*
11.25.9 0e022*
11.25.10 0f002*
11.25.11 0f003*
11.25.12 10002*
11.25.13 10003*
11.26 Finisher
11.26.1 FS-FN adjustment – Center Staple Position
11.26.2 FS-FN adjustment – Half-Fold Position
11.26.3 FS-FN adjustment – Punch Centering Fine Adj
11.26.4 FS-FN adjustment – Punch Edge Adj
11.26.5 FS-FN adjustment – Punch F
11.26.6 FS-FN adjustment – Punch vertical position (Z-fold)
11.26.7 FS-FN adjustment – Punch horizontal position (Z-fold)
11.26.8 FS-FN adjustment – Punch regist adj
11.26.9 FS-FN adjustment – Punch Registration Loop Adj
11.26.10 FS-FN adjustment – Punch Resist Loop Size (PI)
11.26.11 FS-FN adjustment – 1st Z-Fold Position/2nd Z-Fold Position
11.26.12 FS-FN adjustment – 1st Tri-Fold Adjustment/2nd Tri-Fold Adjustment
11.26.13 FS-FN adjustment – Punch regist adj
11.26.14 FS-FN adjustment – PI Size Detection
11.26.15 FS-FN adjustment – Post Inserter Adjustment
11.26.16 FS-FN adjustment – Finisher Components Test Mode
11.26.17 FS-FN adjustment – Paper Alignment Guides W
11.26.18 FS-FN adjustment – Punch unit edge detection
11.26.19 Max Staple Limit Setting
11.26.20 Punch Option Setting
11.26.21 Max
11.26.22 Tri-Fold Output Setting
11.27 Internet ISW
11.27.1 Internet ISW Set
11.27.2 Internet ISW – HTTP Setting
11.27.3 Internet ISW – FTP Setting
11.27.4 Forwarding Access Setting
11.27.5 Download
11.27.6 Update Start Time Settings
12. ENHANCED SECURITY
12.1 List of Enhanced Security
12.2 Starting/Exiting
12.2.1 Starting procedure
12.2.2 Exiting procedure
12.3 Enhanced Security
12.3.1 CE Password
12.3.2 Administrator Password
12.3.3 Administrator Feature Level
12.3.4 CE Authentication
12.3.5 IU Life Stop Setting
12.3.6 Memory Data Backup
12.3.7 Operation Ban release time
12.3.8 Administrator unlocking
12.3.9 Engine FW DipSW
12.3.10 Engine Data Backup
12.3.11 ADF Data Backup
13. BILLING SETTING
Billing setting
13.1 List of billing setting
13.2 Starting/Exiting
13.2.1 Starting procedure
13.2.2 Exiting procedure
13.3 Billing setting
13.3.1 Counter Setting
13.3.2 Management Function Choice
13.3.3 Management Function Choice – Key Counter IF Vendor
13.3.4 Management Function Choice – Authentication Device 2
13.3.5 Management Function Choice – Key Counter Only
13.3.6 Management Function Choice – Management Device
13.3.7 Management Function Choice – Vendor 2
13.3.8 Setting items that automatically change the setting values
13.3.9 Coverage Rate Clear
13.3.10 License management – Activation
13.3.11 License management – Deactivation
13.3.12 License management – Repair
13.3.13 License management – Initialize
13.3.14 License management – Request Code
13.3.15 License management – List
13.3.16 License management – Function List
13.3.17 OpenAPI Authentication Management
13.3.18 WebDAV Server Setting
14. DEBUG SETTINGS
Debug Settings
14.1 List of debug settings
14.2 Starting/Exiting
14.2.1 Starting procedure
14.2.2 Exiting procedure
14.3 Debug Settings
14.3.1 Debug Log Output
14.3.2 Acquiring Mode
14.3.3 TX Debug Log Settings
14.3.4 USB Password
14.4 Operation of the debug log function
14.4.1 Basic mode
14.4.2 Enhance mode
15. CONTENTS TO BE CLEARED BY RESET FUNCTION
16 MECHANICAL ADJUSTMENT bizhub C754/C654
16.1 Scanner section
16.1.1 Adjustment of the scanner motor belt
16.2 Paper feed section
16.2.1 Tray3/4 paper size change
16.2.2 Skew adjustment of the tray 1/2
16.2.3 Centering adjustment of the tray 1/2
16.2.4 Pick-up pressure adjustment of the tray 1/2
16.2.5 Centering adjustment of the tray 3/4
16.2.6 Pick-up roller load adjustment of the tray 3/4
16.3 Bypass tray section
16.3.1 Adjustment of the bypass CD size VR
16.3.2 Separator roller pressureadjustment of the bypass tray
16.4 Main drive unit section
16.4.1 PC drive gear positioning adjustment
16.5 Control panel section
16.5.1 Fixing the control panel
16.5.2 Adjustment of the slide amount
17. MECHANICAL ADJUSTMENT DF-702
17.1 Original document feed section
17.1.1 Adjusting the height
17.1.2 Adjusting front side skew feed on ADF
17.1.3 Adjusting back side skew feed on ADF
17.1.4 Adjusting the pressure of the separation roller
18. MECHANICAL ADJUSTMENT LU-204
18.1 Paper feed section
18.1.1 Centering adjustment of the LCT
18.1.2 Pick-up roller load adjustment of the LCT
19. MECHANICAL ADJUSTMENT LU-301
19.1 Paper feed section
19.1.1 Centering adjustment of the LCT
19.1.2 Pick-up roller load adjustment of the LCT
20. MECHANICAL ADJUSTMENT ZU-606
20.1 Gate solenoid/Lw adjustment
20.1.1 Purpose
20.1.2 Procedure
20.2 1st folding skew adjustment
20.2.1 Purpose
20.2.2 Procedure
20.3 2nd folding skew adjustment
20.3.1 Purpose
20.3.2 Procedure
20.4 2nd stopper position adjustment
20.4.1 Purpose
20.4.2 Procedure
21. MECHANICAL ADJUSTMENT PK-521
21.1 Punch section
21.1.1 Punch hole deviation correction
21.1.2 Centering adjustment of the punch kit
22. MECHANICAL ADJUSTMENT SD-512
22.1 Paper exit section
22.1.1 Half-fold skew adjustment
23. MECHANICAL ADJUSTMENT PI-505
23.1 PI displacement adjustment (with PK-521 installed)
23.1.1 Purpose
23.1.2 Procedure
24. MECHANICAL ADJUSTMENT PK-520
24.1 Punch section
24.1.1 Punch hole deviation correction
25. MECHANICAL ADJUSTMENT SD-511
25.1 Paper exit section
25.1.1 Half-fold skew adjustment

J: REWRITING OF FIRMWARE
1. Confirming the firmware version
1.1 Procedure
2. USB memory
2.1 Preparation
2.2 Procedure
2.3 Action when data transfer fails
2.4 Entering the machine type information
3. Internet ISW
3.1 Preparations for firmware rewriting
3.1.1 Outline
3.1.2 Service environment
3.1.3 Preparations for firmware rewriting
3.2 Making the firmware data
3.2.1 Outline
3.2.2 Procedure
3.3 Firmware rewriting from the control panel
3.3.1 Firmware rewriting from the control panel
4. CS Remote Care
4.1 Firmware rewriting from the CS Remote Care
5 .How to install the i-Option data
5.1 Available function for i-Option
5.2 LK-107/LK-108 font data installation procedure
5.2.1 When the font data is ***.prn format file
5.2.2 When the font data is ***.pdf format file

K: TROUBLESHOOTING
1. JAM CODE
(1) JAM DISPLAY
(2) Misfeed display resetting procedure
1.1 List of the JAM code
1.2 JAM that do not display the JAM code
1.3 Sensor layout
1.3.1 Bizhub C754/C654
1.3.2 DF
1.3.3 LU-204/LU-301
1.3.4 ZU-606
1.3.5 FS-535/PK-521/SD-512
1.3.6 JS-602
1.3.7 PI-505
1.3.8 FS-534/PK-520/SD-511
1.4 Initial check items
1.5 Jam when thin paper is fed
1.6 1*-**
1.6.1 10-01, 10-02, 10-10, 10-40
1.6.2 11-01, 11-02, 11-40
1.6.3 12-01, 12-40
1.6.4 13-01, 13-40
1.6.5 14-01, 14-40
1.6.6 15-01, 15-40
1.6.7 17-20
1.6.8 17-30, 17-31
1.6.9 17-40, 17-41
1.7 2*-**
1.7.1 20-01, 20-02, 20-03, 20-20
1.8 3*-**
1.8.1 30-03
1.8.2 32-01, 32-05, 32-30
1.9 6*-**
1.9.1 66-02, 66-12
1.9.2 66-03, 66-13, 66-23, 66-33
1.9.3 66-04, 66-14
1.9.4 66-05, 66-06, 66-07
1.9.5 66-43, 66-53
1.10 7*-**
1.10.1 72-11
1.10.2 72-13
1.10.3 72-14
1.10.4 72-15
1.10.5 72-16
1.10.6 72-17
1.10.7 72-18
1.10.8 72-19
1.10.9 72-21
1.10.10 72-22
1.10.11 72-23
1.10.12 72-25, 72-26
1.10.13 72-31, 72-34
1.10.14 72-35
1.10.15 72-38
1.10.16 72-39
1.10.17 72-40
1.10.18 72-41, 72-42
1.10.19 72-43
1.10.20 72-44
1.10.21 72-45
1.10.22 72-46
1.10.23 72-47
1.10.24 72-49
1.10.25 72-50
1.10.26 72-51
1.10.27 72-60
1.10.28 72-61
1.10.29 72-62
1.10.30 72-64
1.10.31 72-81
1.10.32 72-84
1.10.33 72-85
1.10.34 72-86
1.10.35 72-87
1.10.36 72-90
1.10.37 73-16
1.10.38 75-42
1.10.39 75-43
1.11 9*-**
1.11.1 92-01, 92-02, 92-03, 92-40
1.11.2 93-10
1.11.3 99-01
2. MALFUNCTION CODE
2.1 Display procedure
2.2 List of the malfunction code
2.3 S-1
2.3.1 Contents
2.3.2 Procedure
2.4 S-2
2.4.1 Contents
2.4.2 Procedure
2.5 D-1
2.5.1 Contents
2.5.2 Procedure
2.6 D-3
2.6.1 Contents
2.6.2 Procedure
2.7 P-5, P-28
2.7.1 Contents
2.7.2 Procedure
2.8 P-6, P-7, P-8, P-9
2.8.1 Contents
2.8.2 Procedure
2.9 P-14
2.9.1 Contents
2.9.2 Procedure
2.10 P-16, P-18
2.10.1 Contents
2.10.2 Procedure
2.11 P-21
2.11.1 Contents
2.11.2 Procedure
2.12 P-22
2.12.1 Contents
2.12.2 Procedure
2.13 P-27
2.13.1 Contents
2.13.2 Procedure
2.14 P-31
2.14.1 Contents
2.14.2 Procedure
2.15 P-32
2.15.1 Contents
2.15.2 Procedure
3. TROUBLE CODE
3.1 Display procedure
3.2 Trouble resetting procedure
3.2.1 Trouble resetting procedure by Trouble Reset key
3.2.2 Trouble resetting procedure by the auto cancel function
3.2.3 Trouble resetting procedure by remote operation
3.3 Trouble isolation function
3.4 List of the trouble code
3.5 C0***
3.5.1 C0002
3.5.2 C0104, C0105
3.5.3 C0202
3.5.4 C0204
3.5.5 C0206
3.5.6 C0208
3.5.7 C0216
3.5.8 C0301
3.5.9 C0351
3.6 C1***
3.6.1 C1003
3.6.2 C1004
3.6.3 C1005
3.6.4 C1080
3.6.5 C1081
3.6.6 C1102
3.6.7 C1103
3.6.8 C1104
3.6.9 C1105
3.6.10 C1106
3.6.11 C1109
3.6.12 C1112
3.6.13 C1113
3.6.14 C1114
3.6.15 C1115
3.6.16 C1124
3.6.17 C1125
3.6.18 C1127
3.6.19 C1130
3.6.20 C1131
3.6.21 C1132
3.6.22 C1133
3.6.23 C1134
3.6.24 C1135
3.6.25 C1136
3.6.26 C1140
3.6.27 C1141
3.6.28 C1142
3.6.29 C1143
3.6.30 C1144
3.6.31 C1145
3.6.32 C1152
3.6.33 C1156
3.6.34 C1184
3.6.35 C1195
3.6.36 C1196
3.6.37 C1197
3.6.38 C11A2
3.6.39 C11E1
3.7 C2***
3.7.1 C2101
3.7.2 C2151
3.7.3 C2152
3.7.4 C2160, C2161, C2162, C2163, C2164
3.7.5 C2204
3.7.6 C2253, C2254
3.7.7 C2255, C2256
3.7.8 C2257, C2258
3.7.9 C2259, C225A
3.7.10 C225B, C225C
3.7.11 C2350
3.7.12 C2353
3.7.13 C2414
3.7.14 C2551, C2553, C2555
3.7.15 C2552, C2554, C2556
3.7.16 C2557
3.7.17 C2558
3.7.18 C2559, C255A, C255B
3.7.19 C255C
3.7.20 C2561, C2562, C2563, C2564
3.7.21 C2650
3.7.22 C2651, C2652, C2653
3.7.23 C2A14
3.7.24 C2A21, C2A22, C2A23, C2A24
3.8 C3***
3.8.1 C3101
3.8.2 C3102
3.8.3 C3201, C3202
3.8.4 C3303
3.8.5 C3305
3.8.6 C3425
3.8.7 C3722, C3725, C3726
3.8.8 C3822, C3825
3.8.9 C3903
3.8.10 C3922, C3925, C3926
3.8.11 C392A
3.8.12 C3B02, C3B03
3.8.13 C3B07, C3B08
3.9 C4***
3.9.1 C4002
3.9.2 C4101
3.9.3 C4301
3.9.4 C4501
3.9.5 C4801
3.9.6 C4802
3.10 C5***
3.10.1 C5104, C5105
3.10.2 C5304
3.10.3 C5306
3.10.4 C5351
3.10.5 C5354
3.10.6 C5355
3.10.7 C5370
3.10.8 C5372
3.10.9 C5601
3.11 C6***
3.11.1 C6001
3.11.2 C6002
3.11.3 C6102, C6103
3.11.4 C6104, C6105
3.11.5 C6704
3.11.6 C6751
3.11.7 C6752
3.11.8 C6753
3.11.9 C6754, C6755
3.11.10 C6756
3.11.11 C6901, C6902, C6903
3.11.12 C6911, C6912, C6913
3.11.13 C6F01
3.12 C8***
3.12.1 C8101
3.12.2 C8103
3.12.3 C8106
3.12.4 C8107
3.12.5 C8302
3.12.6 C8401
3.13 C9***
3.13.1 C9401, C9402
3.13.2 C9403, C9404
3.14 CA***
3.14.1 CA051, CA052, CA053
3.15 CC***
3.15.1 CC001
3.15.2 CC151, CC152, CC153
3.15.3 CC155
3.15.4 CC156
3.15.5 CC157
3.15.6 CC158
3.15.7 CC159, CC15A
3.15.8 CC15B
3.15.9 CC163
3.15.10 CC164
3.15.11 CC165
3.15.12 CC170, CC171, CC172, CC173, CC174, CC180, CC181, CC182, CC183, CC184, CC185, CC186
3.15.13 CC190
3.15.14 CC191
3.15.15 CC211
3.15.16 CC212
3.15.17 CC213
3.15.18 CC214
3.15.19 CC216
3.16 CD***
3.16.1 CD002
3.16.2 CD004, CD00F, CD020
3.16.3 CD010
3.16.4 CD011
3.16.5 CD030
3.16.6 CD041, CD042, CD043, CD044, CD045, CD046
3.16.7 CD047, CD048, CD049, CD04A, CD04B
3.16.8 CD201, CD202, CD203
3.16.9 CD211, CD212
3.16.10 CD241, CD242
3.16.11 CD252
3.16.12 CD261
3.16.13 CD271
3.16.14 CD272
3.16.15 CD3##
3.16.16 CD370
3.16.17 CD390
3.16.18 CD3A0
3.16.19 CD401, CD402, CD403, CD404, CD405, CD406, CD407, CD411, CD412
3.16.20 CDC##
3.16.21 CDF50, CDF70, CDFA0
3.16.22 CDF51, CDF71, CDFA1
3.17 CE***
3.17.1 CE001, CE003, CE004, CE005, CE006, CE007
3.17.2 CE002
3.17.3 CE101
3.17.4 CE201
3.17.5 CE301, CE302, CE303, CE304, CE305
3.17.6 CEEE1
3.17.7 CEEE2
3.17.8 CEEE3
4. ABORT CODE
Abort code
(1) Contents
(2) Procedure
4.1 CF0**
4.2 CF1**
4.3 CF2**
4.4 CF3**
4.5 CF4**
4.6 CF5**
4.7 CF6**
4.8 CF7**
4.9 CF8**
4.10 CF9**
4.11 CFA**
4.12 CFB**
4.12.1 CFB0*
4.12.2 CFB1*
4.12.3 CFB2*
4.12.4 CFB3*
4.12.5 CFB4*
4.12.6 CFB5*
4.12.7 CFB6*
4.12.8 CFB7*
4.12.9 CFB8*
4.12.10 CFBA*
4.13 CFC**
4.13.1 CFC0*
4.13.2 CFC1*
4.13.3 CFC2*
4.13.4 CFC3*
4.13.5 CFC4*
4.13.6 CFC5*
4.13.7 CFC6*
4.13.8 CFC7*
4.13.9 CFC8*
4.13.10 CFC9*
4.13.11 CFCA*
4.13.12 CFCC*
4.13.13 CFCD*
4.13.14 CFCE*
4.14 CFD**
4.14.1 CFD0*
4.14.2 CFD1*
4.14.3 CFD2*
4.14.4 CFD3*
4.14.5 CFD4*
4.14.6 CFD5*
4.14.7 CFDA*
4.15 CFE**
4.15.1 CFE0*
4.15.2 CFE1*
4.15.3 CFE2*
4.15.4 CFE3*
4.15.5 CFE4*
4.15.6 CFE5*
4.15.7 CFEA*
4.16 CFF**
4.16.1 CFF0*
4.16.2 CFF1*
4.16.3 CFF2*
4.16.4 CFF3*
4.16.5 CFF4*
4.16.6 CFF5*
4.16.7 CFFA*
5. ERROR CODE FOR THE INTERNET ISW
5.1 Error code list for the Internet ISW
5.2 0x0*
5.3 0x1*
5.4 0x2*
6. CS Remote Care ERROR CODE
6.1 Troubleshooting for CS Remote Care
6.2 CS Remote Care Operation under Enhanced Security Mode
6.3 List of the CS Remote Care error code
6.3.1 When connecting by modem
6.3.2 When connecting by e-mails
6.3.3 When connecting by http
6.3.4 When connecting by Fax modem
7. NETWORK ERROR CODE
7.1 Display procedure
7.2 IEEE802.1X
7.3 LDAP
7.4 E-Mail/Internet Fax
7.5 FTP transmission
7.6 SMB transmission
7.7 SMTP transmission
7.8 WebDAV transmission
7.9 SMB browsing
7.10 User authentication
7.11 WebDAV client
7.12 WS scan
7.13 Scan server transmission
8. FAX TROUBLE CODE
The error in the transmission/reception system
8.1 B0-**
8.2 B1-1*
8.3 B1-2*
8.4 B1-3*
8.5 B1-4*
8.6 B1-5*
8.7 B1-6*
8.8 B1-7*
8.9 B1-8*
8.10 B1-9*
8.11 T0*
8.12 T1*
8.13 T2*
8.14 T3*
8.15 T4*
8.16 T5*
8.17 T6*
8.18 T7*
8.19 T8*
8.20 T9*
8.21 R0*
8.22 R1*
8.23 R2*
8.24 R3*
8.25 R4*
8.26 R5*
8.27 R6*
8.28 R7*
8.29 R8*
8.30 R9*
8.31 Others
9. DIAGNOSTIC CODES
9.1 Outline
9.2 Explanation
9.2.1 The diagnostic code
9.2.2 Information of communication results and conditions
10. NETWORK FAX ERROR CODE
10.1 Error code list of the transmission system
10.2 Error code list of the reception system
11. Open API Related Trouble
11.1 Outline
11.2 Types of Trouble
11.3 Solution
11.3.1 When using an application
11.3.2 After rewriting the firmware of the machine
12. TROUBLES THAT DO NOT DISPLAY THE TROUBLE CODE
12.1 Machine is not energized at all (DCPU operation check)
12.1.1 Contents
12.1.2 Procedure
12.2 Power is not supplied to DF
12.2.1 Procedure
12.3 Power is not supplied to LU-204/301
12.3.1 Procedure
12.4 Power is not supplied to FS-534/535
12.4.1 Procedure
12.5 MFP does not start
12.5.1 Procedure
13. Other trouble
13.1 Firmware error warning
13.1.1 Action
14. TROUBLESHOOTING OF i-Option
14.1 Structure of license management
14.2 License management information
14.3 Error message
14.3.1 License management error
15. IMAGE QUALITY PROBLEM
15.1 How to read element data
15.1.1 Table number
15.1.2 Level history 1
15.1.3 Level history 2
15.2 How to identify problematic part
15.2.1 Initial check items
15.3 Solution (Scanner system)
15.3.1 Scanner system: white lines, white bands, colored lines and colored bands in sub scan direction
15.3.2 Scanner system: white lines, white bands, colored lines and colored bands in main scan direction
15.3.3 Scanner system: color spots
15.3.4 Scanner system: fog
15.3.5 Scanner system: blurred image, blotchy image
15.3.6 Scanner system: incorrect color image registration, sync shift (lines in main scan direction)
15.3.7 Scanner system: moire
15.3.8 Scanner system: skewed image
15.3.9 Scanner system: distorted image
15.3.10 Scanner system: low image density, rough image
15.3.11 Scanner system: defective ACS
15.3.12 Scanner system: blank copy, black copy
15.3.13 Scanner system: abnormal image
15.3.14 Scanner system: uneven density
15.4 Solution (Printer monocolor)
15.4.1 Printer monocolor: white lines, white bands, colored lines and colored bands in sub scan direction
15.4.2 Printer monocolor: white lines, white bands, colored lines and colored bands in main scan direction
15.4.3 Printer monocolor: uneven density in sub scan direction
15.4.4 Printer monocolor: uneven density in main scan direction
15.4.5 Printer monocolor: low image density
15.4.6 Printer monocolor: gradation reproduction failure
15.4.7 Printer monocolor: foggy background
15.4.8 Printer monocolor: void areas, white spots
15.4.9 Printer monocolor: colored spots
15.4.10 Printer monocolor: blurred image
15.4.11 Printer monocolor: blank copy, black copy
15.4.12 Printer monocolor: uneven image
15.5 Solution (Printer 4-colorr)
15.5.1 Printer 4-color: white lines, white bands, colored lines and colored bands in sub scan direction
15.5.2 Printer 4-color: white lines, white bands, colored lines and colored bands in main scan direction
15.5.3 Printer 4-color: uneven density in sub scan direction
15.5.4 Printer 4-color: uneven density in main scan direction
15.5.5 Printer 4-color: low image density
15.5.6 Printer 4-color: poor color reproduction
15.5.7 Printer 4-color: incorrect color image registration
15.5.8 Printer 4-color: void areas, white spots
15.5.9 Printer 4-color: colored spots
15.5.10 Printer 4-color: poor fusing performance, offset
15.5.11 Printer 4-color: brush effect, blurred image
15.5.12 Printer 4-color: back marking
15.5.13 Printer 4-color: uneven image
16. IC PROTECTOR
16.1 Outline
16.2 IC protector list
16.2.1 Bizhub C754/C654
16.2.2 DF-702
16.2.3 LU-204/LU-301
16.2.4 FS-534
16.2.5 SD-511
16.2.6 FS-535
16.2.7 PK-521
16.2.8 ZU-606
16.2.9 PI-505

L: PARTS/CONNECTOR LAYOUT DRAWING
1. PARTS LAYOUT DRAWING
1.1 Bizhub C754/C654
1.1.1 Scanner section
1.1.2 Front side
1.1.3 Back side
1.1.4 Around the write section
1.1.5 Manual bypass tray
1.1.6 Tray 1
1.1.7 Tray 2
1.1.8 Tray 3
1.1.9 Tray 4
1.1.10 2nd transfer section
1.1.11 Duplex section
1.1.12 Fusing/paper exit section
1.2 DF-702
1.3 LU-204 (Option)
1.4 LU-301 (Option)
1.5 ZU-606 (Option)
1.6 FS-535 (Option)
1.7 PK-521 (Option)
1.8 SD-512 (Option)
1.9 JS-602 (Option)
1.10 PI-505 (Option)
1.11 FS-534 (Option)
1.12 PK-520 (Option)
1.13 SD-511 (Option)
1.14 OT-503 (Option)
2. CONNECTOR LAYOUT DRAWING
2.1 BOARD CONNECTOR LAYOUT DRAWING
2.1.1 Bizhub C754/C654
2.1.2 DF control board (DFCB)
2.1.3 LU drive board (LUDB)
2.1.4 Punch control board (PKCB)
2.1.5 ZU control board (ZUCB)
2.1.6 FS control board (FSCB)
2.1.7 RU control board (RUCB)
2.1.8 SD drive board (SDDB)
2.1.9 PI drive board (PIDB)
2.2 RELAY CONNECTOR LAYOUT DRAWING
2.2.1 How to read the relay connector layout drawing
2.2.2 Bizhub C754/C654

M: TIMING CHART
1. Bizhub C754/C654
1.1 Timing chart in color mode
1.1.1 Operating conditions
1.1.2 Timing chart
2. DF-702
2.1 1-sided mode
2.1.1 Operating conditions
2.1.2 Timing chart
2.2 2-sided mode
2.2.1 Operating conditions
2.2.2 Timing chart
3. LU-204
3.1 Operating conditions
3.2 Timing chart
4. FS-535/SD-512
4.1 2 flat stitching staples mode
4.1.1 Operating conditions
4.1.2 Timing chart
4.2 Saddle stitching mode
4.2.1 Operating conditions
4.2.2 Timing chart
5. ZU-606
5.1 Z-folding+Punch mode
5.1.1 Operating conditions
5.1.2 Timing chart
6. FS-534/SD-511
6.1 Shift mode
6.1.1 Operating conditions
6.1.2 Timing chart
6.2 Center staples mode
6.2.1 Operating conditions
6.2.2 Timing chart

N: WIRING DIAGRAM
1. Bizhub C754/C654
1.1 Main body
2. Option
2.1 Reverse automatic document feeder DF-702
2.2 Large capacity unit LU-204
2.3 Large capacity unit LU-301
2.4 Finisher FS-534
2.5 Saddle stitcher SD-511
2.6 Z folding unit ZU-606
2.7 Finisher FS-535
2.8 Punch kit PK-521
2.9 Saddle sticher SD-512
2.10 Post inserter PI-505

O: THEORY OF OPERATION bizhub C754/C654
1. INTERFACE SECTION
1.1 Configuration
1.1.1 Front side
1.1.2 Rear side
1.1.3 Right side
2. SCANNER SECTION
2.1 Configuration
2.2 Drive
2.3 Operation
2.3.1 LED exposure unit
2.3.2 When the power is ON
2.3.3 Control when the Start key is pressed
2.3.4 Original scanning area
2.3.5 Original size detection control
2.3.6 Operator touch panel with a built-in proximity sensor
2.3.7 Image processing
3. WRITE SECTION (PH SECTION)
3.1 Configuration
3.2 Operation
3.2.1 Outline
3.2.2 Laser exposure process
3.2.3 Laser emission timing
3.2.4 Laser emission stop
3.2.5 Laser emission area
3.2.6 Laser write control
3.2.7 Color registration control (color shift correction) system
3.2.8 Color skew correction control
3.2.9 Skew adjustment/skew adjustment reset
3.2.10 PH unit temperature detection control
3.2.11 Image processing
4. TONER SUPPLY SECTION
4.1 Configuration
4.2 Drive
4.3 Operation
4.3.1 Replenishing the toner hopper with toner
4.3.2 Replenishing the developing unit with toner
4.3.3 Toner cartridge detection
4.3.4 Toner cartridge life control
4.3.5 Toner spill prevention shutter
5. IMAGING UNIT SECTION
5.1 Configuration
5.2 Drive
5.3 Operation
5.3.1 Detection of imaging unit
5.3.2 Detection of drum unit/K
5.3.3 Detection of developing unit/K
5.3.4 Image stabilization control
6. PHOTO CONDUCTOR SECTION
6.1 Configuration
6.2 Drive
6.3 Operation
6.3.1 Photo conductor drive mechanism
6.3.2 Erase LED control
6.3.3 Photo conductor cleaning
7. CHARGE CORONA SECTION
7.1 Configuration
7.2 Operation
7.2.1 Photo conductor charge control
7.2.2 Charge corona cleaning control
8. DEVELOPING SECTION
8.1 Configuration
8.2 Drive
8.3 Operation
8.3.1 Developer flow
8.3.2 Auto refining developing system
8.3.3 Developing bias
8.3.4 Toner scattering prevention
8.3.5 Developing cooling control
8.3.6 T/C ratio control
9. 1st TRANSFER SECTION
9.1 Configuration
9.2 Drive
9.3 Operation
9.3.1 1st transfer roller control
9.3.2 Pressure/retraction control by print mode
9.3.3 ACS
9.3.4 Transfer belt cleaning
9.3.5 Toner collecting roller backward rotation control
9.3.6 Image stabilization control
10. 2nd TRANSFER SECTION
10.1 Configuration
10.2 Drive
10.3 Operation
10.3.1 2nd transfer roller control
10.3.2 2nd transfer control
10.3.3 2nd transfer roller cleaning
10.3.4 Paper separation control
10.3.5 Sensor protection
11. TONER COLLECTING SECTION
11.1 Configuration
11.2 Drive
11.3 Operation
11.3.1 Toner collecting path
11.3.2 Agitation control in waste toner box
11.3.3 Detection of waste toner box loaded in position
11.3.4 Waste toner full detection
12. PAPER FEED SECTION (TRAY1, TRAY2)
12.1 Configuration
12.1.1 Tray 1
12.1.2 Tray 2
12.1.3 Layout of sensors and rollers
12.2 Drive
12.3 Operation
12.3.1 Up/down control
12.3.2 Paper feed control
12.3.3 Paper size detection control
12.3.4 Remaining paper detection control
12.3.5 Paper feed tray locking mechanism
12.3.6 Paper temperature detection control
12.3.7 Spring for thin paper use
13. PAPER FEED SECTION (TRAY3, TRAY4)
13.1 Configuration
13.1.1 Tray 3
13.1.2 Horizontal transport
13.1.3 Tray 4
13.1.4 Layout of sensors and rollers
13.2 Drive
13.2.1 Tray 3
13.2.2 Horizontal transport/Vertical transport
13.2.3 Tray 4
13.3 Operation
13.3.1 Up/down control
13.3.2 Paper Feed control
13.3.3 Paper size detection control
13.3.4 Remaining paper detection control
13.3.5 Dehumidifier heater control
13.3.6 Detection of tray 3 or tray 4 slid out/in
13.3.7 Detection of horizontal transport unit slid out/in
14. PAPER FEED SECTION (BYPASS TRAY)
14.1 Configuration
14.2 Drive
14.3 Operation
14.3.1 Bypass paper lifting motion control
14.3.2 Paper feed control
14.3.3 Paper size detection control
14.3.4 Remaining paper detection control
14.3.5 Detection of bypass unit opened/closed
14.3.6 Detection of bypass sub tray extended/retracted
14.3.7 Separation roller pressure changing mechanism
15. REGISTRATION SECTION
15.1 Configuration
15.2 Drive
15.3 Operation
15.3.1 Registration control
15.3.2 OHP detection
15.3.3 Paper transport speed control
16. FUSING SECTION
16.1 Configuration
16.1.1 Configuration of the temperature detector element of fusing unit
16.2 Drive
16.3 Operation
16.3.1 Fusing speed correction
16.3.2 Fusing pressure/retraction control
16.3.3 Heating roller assy heating control
16.3.4 Fusing temperature control
16.3.5 Heating roller temperature sensor
16.3.6 Heating roller temperature sensor condensation detection
16.3.7 Heating roller temperature sensor contamination detection control
16.3.8 Heating roller alternative temperature control
16.3.9 Protection against abnormal temperature
16.3.10 Sensor disconnection detection control
16.3.11 IH power supply control
16.3.12 Brandnew detection
16.3.13 Fusing cooling control
17. DUPLEX SECTION
17.1 Configuration/Drive
17.2 Operation
17.2.1 Paper transport control
17.2.2 Duplex circulation control
18. PAPER EXIT/SWITCHBACK SECTION
18.1 Configuration
18.2 Drive
18.3 Operation
18.3.1 Transport control
19. IMAGE STABILIZATION CONTROL
19.1 Overview
19.2 Description of control
19.2.1 IDC sensor adjustment control
19.2.2 Max image density adjustment control
19.2.3 LD (laser diode) intensity adjustment control
19.2.4 Gamma correction control
19.3 Operation sequence
19.4 Operation timing
19.4.1 Predrive operation
19.4.2 Before, during, and after a print cycle
19.4.3 Service Mode
19.4.4 Expert Adjustment
19.4.5 Stabilization time
20. IMAGE PROCESSING
20.1 Scanner section image processing block diagram
20.2 CIS section image processing block diagram
20.3 Write section image processing block diagram
21. POWER SUPPLY SECTION
21.1 Main power switch
21.2 Power key
21.2.1 Configuration
21.2.2 Power key functions
21.2.3 Status in each mode
21.2.4 Operation
22. FAN CONTROL
22.1 Configuration
22.2 Function
22.3 Control conditions
23. COUNTER CONTROL
23.1 Configuration
23.2 Operation

PA THEORY OF OPERATION DF-702
1. CONFIGURATION
1.1 Section configuration
1.2 Paper path
1.3 Configuration
2. DRIVE
2.1 Paper feed drive
2.2 Registration drive
2.3 Paper read/exit drive
2.4 DF original glass cleaning drive
3. OPERATION
3.1 Paper feed section
3.1.1 Document feed tray ascent/descent control
3.1.2 Original take-up control
3.1.3 Original set detection
3.1.4 Original size detection
3.2 Registration section
3.2.1 Registration control
3.2.2 Registration control for different width mixed original
3.3 Read section
3.3.1 Outline
3.3.2 Reading transport control
3.3.3 Reading roller pressure/retraction control
3.3.4 DF original glass contamination prevention control
3.3.5 CIS original reading control
3.3.6 CIS control when sub-power switch is turned ON
3.3.7 CIS control when the document is loaded
3.3.8 CIS control when the start key is pressed
3.3.9 CIS glass contamination prevention control
3.3.10 Opening and closing guide set detection
3.4 Paper exit section
3.5 Paper path control
3.5.1 1-sided mode
3.5.2 2-sided mode
3.6 Open/close detecting section
3.6.1 DF angle open/close detection
3.6.2 DF open/close detection
3.7 Fan control
3.7.1 Function
3.7.2 Control conditions

PB THEORY OF OPERATION LU-204
1. SECTION CONFIGURATION
2. PAPER PATH
3. CONFIGURATION
4. DRIVE
5. OPERATION
5.1 Paper feed and transport control
5.2 Paper level detection
5.3 Paper empty detection
5.4 Paper level indicator
5.5 Tray lift-up control
5.5.1 Tray ascend/descend mechanism
5.5.2 Paper size detection
5.6 Dehumidification heater control

PC THEORY OF OPERATION LU-301
1. SECTION CONFIGURATION
2. PAPER PATH
3. CONFIGURATION
4. DRIVE
5. OPERATION
5.1 Paper feed and transport control
5.2 Paper level detection
5.3 Paper empty detection
5.4 Paper level indicator
5.5 Tray lift-up control
5.5.1 Tray ascend/descend mechanism
5.5.2 Paper size detection
5.6 Dehumidification heater control

PD THEORY OF OPERATION FS-534/PK-520/SD-511
1. FINISHER OUTLINE
2. PAPER PATH
2.1 Sub Tray
2.2 Main tray
2.3 Saddle tray
2.4 3rd tray
3. CONFIGURATION
3.1 Section configuration
3.2 Main electrical part configuration
3.2.1 Control board, motor
3.2.2 Sensor
3.3 Main mechanical part configuration
3.3.1 Overall configuration
3.3.2 RU section (horizontal transport section)
3.3.3 Paper feed/transport section, Alignment section, tray section
3.3.4 Punch section, staple section, exit section
3.3.5 Saddle section 1
3.3.6 Saddle section 2
3.4 Main roller configuration
4. FNS SECTION
4.1 Front door open/close detection mechanism
5. RU SECTION (HORIZONTAL TRANSPORT SECTION)
5.1 Configuration
5.1.1 Exclusive parts for bizhub C754/C654
5.2 Drive
5.3 Operation
5.3.1 Paper transport control
5.3.2 RU section door open/close detection mechanism
6. PUNCH SECTION (PK-520)
6.1 Configuration
6.1.1 Punch kit type
6.2 Drive
6.3 Operation
6.3.1 Skew correction mechanism
6.3.2 Puncher up/down status detection configuration
6.3.3 Punch dust box full detection mechanism
7. TRANSPORT SECTION
7.1 Configuration
7.1.1 Paper feed section – sub tray section
7.1.2 Paper feed section – main tray section
7.1.3 Main tray section – saddle section
7.2 Drive
7.2.1 FNS entry transport motor
7.2.2 FNS discharge motor
7.2.3 Receiving roller retraction motor
7.3 Operation
7.3.1 Paper path switching mechanism
7.3.2 Receiving roller section up/down function
7.3.3 Buffer control
7.3.4 Sub tray exit mechanism
8. ALIGNMENT SECTION
8.1 Configuration
8.1.1 Upper paddle section
8.1.2 Exit section
8.1.3 Stopper section (FD alignment section)
8.1.4 Alignment tray section (CD alignment section)
8.2 Drive
8.2.1 Drive outline
8.2.2 Upper paddle section
8.2.3 Exit section
8.2.4 Stopper section
8.2.5 Alignment tray section
8.3 Operation
8.3.1 Paper transport control in alignment section
9. STAPLER SECTION
9.1 Configuration/Drive
9.1.1 Configuration
9.1.2 Drive
9.2 Operation
9.2.1 Stapler positioning control
9.2.2 Stapling control
9.2.3 Staple empty detection control
9.2.4 Clogged staple detection control
10. RECEIVING SECTION
10.1 Configuration
10.1.1 Configuration outline
10.1.2 Main tray
10.1.3 Sub tray
10.1.4 Saddle tray
10.2 Drive
10.2.1 Main tray section
10.2.2 Sub tray section
10.2.3 3re tray section
10.2.4 Saddle tray section
10.3 Operation
10.3.1 Sub tray exit mechanism
10.3.2 Main tray paper level detection control
10.3.3 Main tray upper detection mechanism
10.3.4 Tray full detection mechanism
11. SADDLE SECTION SD-511
11.1 Configuration
11.2 Transport section
11.2.1 Drive
11.2.2 Paper transport
11.2.3 Unbend cover
11.3 Alignment section
11.3.1 Drive
11.3.2 Alignment
11.3.3 Stopper guide
11.4 Stapler
11.4.1 Drive
11.4.2 Operation
11.5 Folding/Saddle stitching
11.5.1 Drive
11.5.2 Folding knife
11.6 Tri-folding
11.6.1 Drive
11.6.2 Tri-folding operation
11.7 Exit section
11.7.1 Drive
11.7.2 Paper exit

PE THEORY OF OPERATION FS-535/ZU-606/PK-521/SD-512/JS-602/PI-505
1. PAPER PATH
1.1 Paper path (FS-535/SD-512/PK-521/PI-505)
1.2 Paper path (FS-535/ZU-606/JS-602)
2. CONFIGURATION
2.1 Finisher main body
2.2 Horizontal transport section
3. HORIZONTAL TRANSPORT SECTION
3.1 Drive
3.2 Operation
3.2.1 Paper horizontal transport operation
4. TRANSPORT SECTION
4.1 Drive
4.2 Operation
4.2.1 Paper transport (from the horizontal transport section to the route switching gate)
4.2.2 Route switching gate
4.2.3 Paper transport (from the route switching gate to the sub tray switching gate)
4.2.4 Switchback gate
4.2.5 Paper transport (sub tray exit/Bypass route)
4.2.6 Bypass gate
4.2.7 Sub tray switching gate
4.2.8 Sub tray exit
4.2.9 Paper transport (from the sub tray switching gate to transport roller/5)
5. ALIGNMENT SECTION
5.1 Drive
5.2 Operation
5.2.1 Paper transport (from the transport roller/5 to the alignment section)
5.2.2 Alignment plate
5.2.3 Trailing edge stopper
5.2.4 Paper transport (from the alignment section to the main tray section)
5.2.5 Stack support plate control
6. EXIT TRAY SECTION
6.1 Drive
6.2 Operation
6.2.1 Tray lift
6.2.2 Paper detection
7. STAPLER SECTION
7.1 Drive
7.2 Operation
7.2.1 Stapler movement
7.2.2 Stapler control
8. Z-FOLDING SECTION ZU-606
8.1 Configuration
8.1.1 Section configuration
8.1.2 Conveyance section
8.1.3 Punch section
8.1.4 Punch scraps conveyance section
8.1.5 Z-folding section
8.2 Drive
8.2.1 Conveyance section
8.2.2 Punch section
8.2.3 Punch scraps conveyance section
8.2.4 Z-folding section
8.3 Operation
8.3.1 Conveyance path switching
8.3.2 Conveyance line speed switching
8.3.3 Registration control
8.3.4 Punch section operation outline
8.3.5 Punch control
8.3.6 Punch position movement control
8.3.7 Punch hole switching control
8.3.8 Punch scraps conveyance control
8.3.9 Punch scraps control
8.3.10 1st folding control
8.3.11 2nd folding control
9. PUNCH SECTION PK-521
9.1 Configuration
9.2 Drive
9.2.1 Punch shift section
9.2.2 Punch section
9.2.3 Punch scraps box section
9.3 Operation
9.3.1 Punch standby position movement control
9.3.2 Punch position correction control
9.3.3 Punch control
9.3.4 Punch scraps box control
10. SADDLE SECTION SD-512
10.1 Configuration
10.2 Transport section
10.2.1 Drive
10.2.2 Paper transport
10.2.3 Paper receiving guide
10.3 Alignment section
10.3.1 Drive
10.3.2 Alignment
10.3.3 Stopper guide
10.4 Stapler
10.4.1 Drive
10.4.2 Operation
10.5 Folding/Saddle stitching
10.5.1 Drive
10.5.2 Folding knife
10.6 Tri-folding
10.6.1 Drive
10.6.2 Tri-folding operation
10.7 Exit section
10.7.1 Drive
10.7.2 Paper exit
10.7.3 Paper transport belt
11. JOB TRAY JS-602
11.1 Configuration
11.2 Drive
11.3 Operation
11.3.1 Job tray paper transport mechanism
12. POST INSERT SECTION PI-505
12.1 Configuration
12.2 Drive
12.2.1 Paper feed drive
12.2.2 Tray lift drive
12.3 Operation
12.3.1 Tray lift mechanism
12.3.2 Pick-up mechanism
12.3.3 Separation mechanism
12.3.4 Registration control
12.3.5 Paper size detection control

PF THEORY OF OPERATION AU-102/AU-201/OT-503
1. AU-102
1.1 Configuration
1.2 Operation
2. AU-201
2.1 Configuration
2.2 Operation
3. OT-503
3.1 Configuration
3.2 Operation

PG THEORY OF OPERATION EK-604/EK-605/SC-508
1. EK-604
1.1 Configuration
1.2 Operation
2. EK-605
2.1 Configuration
2.2 Operation
3. SC-508
3.1 Configuration
3.2 Operation

PH THEORY OF OPERATION FK-511
1. COMMUNICATION CONTROL
1.1 FIF bits of DIS, DTC and DCS
1.1.1 FIF data configuration list (DIS/DTC)
1.1.2 FIF data configuration list (DCS)
1.2 Modem fallback sequence
1.2.1 V17, V29, and V27 ter
1.2.2 V34
1.3 V8/V34 sequence
1.3.1 V34
1.3.2 Sample of a signal procedure at sending two pages
1.3.3 Procedure details
1.3.4 Common signal bit definition
1.3.5 Phase 2 (Probing)
1.3.6 Phase 3
1.3.7 Re-synchronization procedure / Startup procedure
1.3.8 Others
2. FUNCTION
2.1 Telephone function
2.1.1 TEL/FAX switching
2.2 F-code
2.2.1 Signal format
2.2.2 F-code confidential transmission
2.2.3 F-code bulletin board polling
2.2.4 F-code relay transmission
2.3 Transmission function
2.3.1 Original scan mode
2.4 Reception function
2.4.1 Reduction / division of reception
2.4.2 Cassette / paper selection
2.4.3 Compulsory memory reception
2.4.4 Closed reception (Junk FAX)

Q: PARTS GUIDE MANUAL (1st Edition)
INFORMATION FOR PARTS GUIDE MANUAL
HOW TO MAKE THE BEST USE OF THIS MANUAL
SYSTEM OUTLINE
1. DIGITAL MFP COLOR (bizhub C654/bizhub C754)
DIAGRAM OF MAIN PARTS SECTION
1.1 ADF EXTERNAL PARTS
1.2 ADF PAPER FEED TRAY SECTION
1.3 ADF CONVEYANCE SECTION
1.4 ADF LEFT COVER SECTION
1.5 ADF READ GUIDE SECTION
1.6 ADF CIS SECTION
1.7 ADF GLASS CLEANING SECTION
1.8 ADF CIS CLEANING SECTION
1.9 EXTERNAL PARTS
1.10 CONTROL PANEL SECTION
1.11 IR COVER SECTION
1.12 IR FRAME SECTION
1.13 SCANNER SECTION
1.14 CCD UNIT
1.15 SCANNER DRIVE/IR BOARD SECTION
1.16 PH UNIT
1.17 TONER RAIL SECTION
1.18 CONTACT SECTION
1.19 I/U LOCK LEVER SECTION
1.20 OZONE DUCT SECTION
1.21 TONER SUPPLY SECTION
1.22 TRANSFER UNIT
1.23 TRANSFER RAIL SECTION
1.24 ERASE LAMP SECTION
1.25 TONER COLLECT SECTION
1.26 1ST PAPER FEED SECTION
1.27 2ND PAPER FEED SECTION
1.28 CASSETTE TRAY
1.29 CASSETTE RAIL SECTION
1.30 SIZE DETECTING SECTION
1.31 1000-SHEET PAPER FEED SECTION
1.32 LCC DRIVE SECTION
1.33 LEVEL CONVEYANCE SECTION
1.34 1500-SHEET PAPER FEED SECTION
1.35 LCC CASSETTE RAIL SECTION
1.36 LCC LENGTH CONVEYANCE SECTION
1.37 1000-SHEET TRAY
1.38 1500-SHEET TRAY
1.39 CASSETTE TRAY
1.40 MANUAL FEED TYAY UNIT
1.41 PAPER EXIT CONVEYANCE SECTION
1.42 REGISTRATION SENSOR SECTION
1.43 ROTATION DETECTING SENSOR SECTION
1.44 FUSING UNIT
1.45 ADU
1.46 PAPER EXIT SECTION
1.47 REVERSAL SECTION
1.48 MAIN DRIVE SECTION
1.49 FUSING DRIVE SECTION
1.50 BOTTLE DRIVE SECTION
1.51 EJECT DRIVE SECTION
1.52 MAIN FRAME SECTION
1.53 I/U FRAME SECTION
1.54 REAR FAN SECTION
1.55 DOOR SAFE SWITCH SECTION
1.56 HIGH VOLTAGE SECTION
1.57 MAIN POWER SUPPLY SECTION
1.58 SHIELD BOX
1.59 REAR ELECTRICAL SECTION
1.60 IH POWER SUPPLY SECTION
1.61 WIRING
1.62 WIRING ACCESSORIES AND JIGS
1.63 ACCESSORY PARTS
1.64 MAINTENANCE LIST
1.65 DESTINATION
2. FAX CONTROLLER (FK-511)
2.1 FK-511
2.2 DESTINATION
3. OTHER OPTION (EK-604)
3.1 EK-604
3.2 WIRING ACCESSORIES AND JIGS
3.3 DESTINATION
4. OTHER OPTION (EK-605)
4.1 EK-605
4.2 WIRING ACCESSORIES AND JIGS
4.3 DESTINATION
5. OTHER OPTION (VI-506)
5.1 VI-506
5.2 DESTINATION
6. OTHER OPTION (MK-715)
6.1 MK-715
6.2 DESTINATION
7. PAPER FEEDER (LU-301)
7.1 EXTERNAL PARTS
7.2 FRAME SECTION
7.3 LIFT-UP TRAY SECTION
7.4 FRONT LIFT WIRE SECTION
7.5 PAPER FEED SECTION
7.6 PAPER TRANSPORT SECTION
7.7 REAR LIFT WIRE SECTION
7.8 DRIVE SECTION
7.9 WIRING
7.10 WIRING ACCESSORIES AND JIGS
7.11 ACCESSORY PARTS
7.12 MAINTENANCE LIST
7.13 DESTINATION
8. PAPER FEEDER (LU-204)
8.1 EXTERNAL PARTS
8.2 FRAME SECTION
8.3 LIFT-UP TRAY SECTION
8.4 FRONT LIFT WIRE SECTION
8.5 PAPER FEED SECTION
8.6 PAPER TRANSPORT SECTION
8.7 REAR LIFT WIRE SECTION
8.8 DRIVE SECTION
8.9 WIRING
8.10 WIRING ACCESSORIES AND JIGS
8.11 ACCESSORY PARTS
8.12 MAINTENANCE LIST
8.13 DESTINATION
9. OTHER OPTION (IC-414)
9.1 IC-414
9.2 DESTINATION
10. OTHER OPTION (SD-511)
10.1 EXTERNAL PARTS
10.2 FRAME SECTION
10.3 REAR FRAME SECTION
10.4 PAPER CEASE SECTION
10.5 PAPER TRANSPORT SECTION
10.6 STAPLER SECTION
10.7 ALIGNMENT SECTION
10.8 PAPER EXIT TRAY SECTION
10.9 WIRING
10.10 WIRING ACCESSORIES AND JIGS
10.11 ACCESSORY PARTS
10.12 MAINTENANCE LIST
10.13 DESTINATION
11. SORTER/FINISHER (FS-534)
11.1 EXTERNAL PARTS
11.2 FRAME SECTION
11.3 PAPER TRANSPORT SECTION
11.4 ELEVATE SECTION
11.5 STAPLER SECTION
11.6 PAPER EXIT SECTION
11.7 COMPILE SECTION
11.8 HORIZONTAL TRANSPORT SECTION
11.9 WIRING
11.10 WIRING ACCESSORIES AND JIGS
11.11 ACCESSORY PARTS
11.12 DESTINATION
12. OTHER OPTION (SD-512)
12.1 EXTERNAL PARTS
12.2 FRAME SECTION
12.3 REAR FRAME SECTION
12.4 PAPER CEASE SECTION
12.5 PAPER TRANSPORT SECTION
12.6 STAPLER SECTION
12.7 ALIGNMENT SECTION
12.8 PAPER EXIT TRAY SECTION
12.9 PAPER EXIT SECTION
12.10 WIRING
12.11 WIRING ACCESSORIES AND JIGS
12.12 ACCESSORY PARTS
12.13 MAINTENANCE LIST
12.14 DESTINATION
13. SORTER/FINISHER (FS-535)
13.1 EXTERNAL PARTS
13.2 MAIN FRAME SECTION
13.3 PAPER TRANSPORT SECTION
13.4 ALIGNMENT SECTION
13.5 STAPLER SECTION
13.6 DRIVE SECTION
13.7 HORIZONTAL TRANSPORT UNIT
13.8 WIRING
13.9 WIRING ACCESSORIES AND JIGS
13.10 ACCESSORY PARTS
13.11 MAINTENANCE LIST
13.12 DESTINATION
14. PUNCH UNIT (PK-520)
14.1 PUNCH UNIT
14.2 WIRING ACCESSORIES AND JIGS
14.3 ACCESSORY PARTS
14.4 DESTINATION
15. PUNCH UNIT (PK-521)
15.1 PUNCH UNIT
15.2 2 HOLE TYPE
15.3 2/3 HOLE TYPE
15.4 2/4 HOLE TYPE
15.5 SWEDEN TYPE
15.6 ACCESORY PARTS
15.7 DESTINATION
16. OTHER OPTION (PI-505)
16.1 EXTERNAL PARTS
16.2 PAPER FEED SECTION
16.3 PAPER FEED DRIVING SECTION
16.4 CONVEYANCE GUIDE SECTION
16.5 CONVEYANCE BELT SECTION
16.6 PAPER FEED TRAY
16.7 WIRING ACCESSORY
16.8 ACCESSORY PARTS
16.9 MAINTENANCE LIST
16.10 DESTINATION
17. OTHER OPTION (JS-602)
17.1 JS-602
17.2 WIRING ACCESSORY
17.3 DESTINATION
18. OTHER OPTION (ZU-606)
18.1 MAIN FRAME
18.2 EXTERNAL PARTS
18.3 CONVEYANCE SECTION
18.4 PUNCH UNIT (2-3 HOLES)
18.5 PUNCH UNIT (2-4 HOLES)
18.6 PUNCH UNIT (SWEDEN 4 HOLES)
18.7 PUNCH SCRAPS CONVEYANCE SECTION
18.8 Z-FOLDING SECTION
18.9 WIRING ACCESSORY
18.10 ACCESSORY PARTS
18.11 MAINTENANCE LIST
18.12 DESTINATION
19. OTHER OPTION (OT-503)
19.1 OT-503
19.2 DESTINATION
20. OTHER OPTION (OC-507)
20.1 OC-507
20.2 DESTINATION

S: LAYOUT DRAWINGS FOR RELATED PARTS BY EACH TROUBLE CODE
1. C0002
2. C0104, C0105
3. C0202
4. C0204
5. C0206
6. C0208
7. C0216
8. C0301
9. C0351
10. C1003
11. C1004, CC155, CC155
12. C1005, CC157
13. C1080
14. C1081
15. C1102
15. 1 FS-534
15. 2 FS-535
16. C1103
16.1 FS-534
16.2 FS-535
17. C1104
18. C1105
18.1 FS-534
18.2 FS-535
19. C1106
19.1 FS-534
19.2 FS-535
20. C1109
20.1 FS-534
20.2 FS-535
21. C1112
21.1 SD-511
21.2 SD-512
22. C1113
22.1 SD-511
22.2 SD-512
23. C1114
23.1 SD-511
23.2 SD-512
24. C1115
24.1 SD-511
24.2 SD-512
25. C1124
26. C1125
27. C1127
28. C1130
29. C1131
30. C1132
30.1 PK-520
30.2 PK-521
31. C1133
32. C1134
33. C1135
34. C1136
35. C1140
35. 1 FS-534
35. 2 FS-535
36. C1141
36.1 FS-534
36.2 FS-535
37. C1142
38. C1143
39. C1144
39.1 FS-534
39.2 FS-535
40. C1145
40.1 FS-534
40.2 FS-535
41. C1152
42. C1156
42.1 SD-511
42.2 SD-512
43. C1184
44. C1195
44.1 SD-511
44.2 SD-512
45. C1196
45.1 SD-511
45.2 SD-512
46. C1197
46.1 SD-511
46.2 SD-512
47. C11A2
48. C11E1
49. C2101
50. C2151
51. C2152
52. C2160, C2161, C2162, C2163, C2164
53. C2204
54. C2253, C2254
55. C2255, C2256
56. C2257, C2258
57. C2259, C225A
58. C225B, C225C
59. C2350
60. C2353
61. C2414, C2552, C2554, C2556, C2558, C2559, C255A, C255B, C255C, C2651, C4802, C5601, CC153, CEEE3
S-78
62. C2551, C2553, C2555
63. C2557
64. C2561, C2562, C2563, C2564
65. C2650
66. C3101
67. C3102
68. C3201, C3202
69. C3303
70. C3305
71. C3425, C3725, C3825, C3925
72. C3722, C3726, C3822, C3903, C3922, C3926
73. C392A
74. C3B02, C3B03
75. C3B07, C3B08
76. C4002
77. C4101
78. C4301
79. C4501
80. C4801, CC163
81. C5104, C5105
82. C5304
83. C5306
84. C5351
85. C5354
86. C5355
87. C5370
88. C5372
89. C6001
90. C6002
91. C6102, C6103
92. C6104, C6105
93. C6704, C6752, CDF50, CDF70, CDFA0
94. C6751
95. C6753
96. C6754, C6755
97. C6756
98. C6901 – C6903, CA051 – CA053, CC151, CC152, CC170 – CC174, CC180 – CC186, CC191, CC211 – CC214,
C216, CD211, CD212, CD241, CD242, CD252, CD261, CD271, CD401 – CD412, CE001, CE003 – CEEE1
99. C6911, C6912, C6913, CDF51, CDF71, CDFA1
100. C6F01
101. C8101
102. C8103
103. C8106
104. C8107
105. C8302
106. C8401, CC156, CC165
107. C9401, C9402
108. C9403, C9404
109. CC001
110. CC158
111. CC15B
112. CC164
113. CC190, CD002, CD004, CD00F, CD020
114. CD010, CD272, CE002
115. CD011, CD041, CD042, CD043, CD044, CD045, CD046, CD047, CD048, CD049, CD04A, CD04B
116. CD201, CD202, CD203
117. CD3A0
118. CEEE2

Number of pages: 2011.