Fujitsu fi-5530C/fi-5530C2 Service Manual

This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Fujitsu.
You can print, zoom or read any diagram, picture or page from this manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Fujitsu fi-5530C/fi-5530C2 Service Manual.
Table of contents:

CHAPTER 1. OVERVIEW
1-1 OVERVIEW
1-2 DOCUMENT SPECIFICATION
1-2-1 Document Size
1-2-2 Document Quality
1-2-3 Capacity of ADF
1-2-4 Area not to be perforated
1-2-5 Multi feed detection condition
1-2-6 Condition for automatic document size detection
1-3. PARTS CONFIGURATION
1-4. UNPACKING THE SCANNER
1-5. INSTALLING THE SCANNER
1-5-1 For safe installation
1-5-2 Installation
1-6 BASIC OPERATION
1-6-1 Power ON/OFF
1-6-2 Loading Documents for Scanning
1-7 DAILY CARE
1-7-1 Cleaning ADF
1-8 REPLACING THE CONSUMABLES
1-8-1 Consumables
1-8-2 Replacing Pad ASSY
1-8-3 Replacing Pick roller
1-8-4 Resetting Consumable Counters

CHAPTER 2. DESCRIPTION OF SCANNER OPERATION
2-1 ADF UNIT
2-2 READING STATION
2-3 CONTROLLER
2-4 ELECTRIC COMPONENT BLOCK DIAGRAM

CHAPTER 3. TROUBLESHOOTING
3-1 SELF-DIAGNOSIS FUNCTION
3-1-1. Scanner status display and self-diagnostics at power-on
3-1-2. Online self-diagnostics
3-1-3. Self-diagnostics in Maintenance mode
3-2 TEMPORARY ERRORS AND ALARM DETECTION ALGORITHM
3-2-1. Temporary errors
3-2-2. Alarms
3-3 TROUBLESHOOTING
3-3-1. Scanner does not turn ON (No display on the operator panel)
3-3-2. Scanning does not start
3-3-3. Scanned image is distorted
3-3-4. Resolution or gradation of scanned image is unsatisfactory
3-3-5. Too much jitter on scanned image with ADF scanning
3-3-6. Scanned image is misaligned with ADF scanning
3-3-7. Scan magnification factor abnormal with ADF scanning
3-3-8. Vertical streaks appear in scanned image
3-3-9. When calibrating white of scanned image
3-3-10. Frequent “U1: paper jam error”
3-3-11. Error detection of “No paper on the Chute unit”
3-3-12. Error detection of “U4: ADF cover open”
3-3-13. Frequent “U2: multi feed error”
3-3-14. “E2 or E3: Optical alarm”
3-3-15. “E4: Motor fuse blown”
3-3-16. (Reserved)
3-3-17. “E6: Operator panel alarm”
3-3-18. “E7: EEPROM alarm”
3-3-19. “E8: SCSI fuse blown”
3-3-20. “E9: Image memory alarm”
3-3-21. “EA: Imprinter error”
3-3-22. “Ec: RAM alarm”
3-3-23. “Ed: SPC alarm”
3-3-24. “EF: Background changeover alarm”

CHAPTER 4. DISASSEMBLY / ASSEMBLY
4-1. SAFETY
4-2.MAINTENANCE
4-2-1 Periodic maintenance
4-3 CLEANING
4-3-1 Cleaning Optical unit (for front side)
4-3-2 Cleaning glass of Dust Cover
4-3-3 Cleaning Optical unit (for backside)
4-3-4 Cleaning glass of Upper Frame ASSY
4-4MAINTENANCE TOOL
4-5 NON DISASSEMBLY PARTS
4-6 (RESERVED)
4-7. REMOVING /MOUNTING CHUTE UNIT, STACKER UNIT, PCB UNIT AND COVERS
4-7-1. Removing/Mounting the Chute unit (ADF paper chute)
4-7-2. Removing/Mounting the Stacker Unit
4-7-3. Removing/Mounting the PCB unit
4-7-4. Removing/Mounting the Rear cover
4-7-5. Removing/Mounting the Upper cover
4-7-6. Removing/Mounting the Guide A ASSY
4-8. REPLACING THE UPPER UNIT AND THE BASE UNIT
4-9. REPLACING THE PARTS IN THE UPPER UNIT
4-9-1. Replacing the Panel PCA
4-9-2. Replacing the Inverter SR
4-9-3. Replacing the Optical unit, OPT unit with cable B and CCD Cable B
4-9-4. Replacing the Lamp SR (for ADF backside)
4-9-5. Replacing the US Sensor (In Upper unit)
4-9-6. Replacing the LF Motor
4-9-7. Replacing Sensor EM / Sensor PICK / Sensor TOP
4-9-8. Replacing the Upper Frame ASSY
4-10. REPLACING THE PARTS IN THE BASE UNIT
4-10-1 Replacing the Guide P ASSY (sheet guide), US Sensor, US PCA
4-10-2. Replacing the HK Ring SR
4-10-3. Replacing the Dust cover
4-10-4. Replacing the Inverter SR (for front side scanning)
4-10-5. Replacing the Lamp SR (for ADF front)
4-10-6. Replacing the Optical Unit, OPT unit with Cable F, CCD Cable F
4-10-7. Replacing the Pick Motor
4-10-8. Replacing the BW Motor
4-11. REPLACING THE CONTROL PCA

CHAPTER 5. ADJUSTMENT/SETTINGS
5-1MAINTENANCE MODE
5-1-1 Activating the Maintenance mode
5-1-2 Maintenance mode #1: Paper feeding test / Sensor test / Background changeover test
5-1-3 Maintenance mode #2: Main scanning / Sub-scanning magnification adjustment
5-1-4 Maintenance mode #3 : Offset adjustment
5-1-5 Maintenance mode #4: White level adjustment
5-1-6 Maintenance mode #5: Counter display and reset
5-1-7 Maintenance mode #6: Miscellaneous information display
5-1-8 Maintenance mode #7: EEPROM data restore
5-2 SAVING EEPROM DATA
5-3 EMULATION MODE

CHAPTER 6. MAINTENANCE PARTS
6-1. BASE UNIT
6-2. DUST COVER
6-3. HK RING SR
6-4. INVERTER SR
6-5. LAMP SR
6-6. US SENSOR
6-7. US PCA
6-8. OPTICAL UNIT WITH CABLE F
6-9. CCD CABLE F
6-10. OPTICAL UNIT
6-11. PICK MOTOR
6-12. GUIDE P ASSY
6-13. BWMOTOR
6-14. UPPER UNIT
6-15. UPPER FRAME ASSY
6-16. LFMOTOR
6-17. SENSOR EM
6-18. SENSOR PICK
6-19. SENSOR TOP
6-20. OPTICAL UNIT WITH CABLE B
6-21. CCD CABLE B
6-22. PANEL PCA
6-23. CONTROL PCA
6-24. STACKER UNIT
6-25. CHUTE UNIT
6-26. AC ADAPTER
6-27. AC CORDSET U
6-28. AC CORDSET E / AC CORDSET C / AC CORDSET UK

APPENDIX A DEFINITION OF SCANNER AND CAMERA PROPERTIES
A.1 DISPLAYING SCANNER AND CAMERA PROPERTIES
A.2 GENERAL TAB
A.3 EVENTS TAB
A.4 DIAGNOSTIC TAB
A.5 DEVICE INFORMATION TAB
A.6 DEVICE SETUP TAB
A.7 ABOUT TAB
A.8 COLOR MANAGEMENT TAB FOLDER