Konica Minolta AccurioPress C2070/C2070P/C2060 AccurioPrint C2060L Service Manual and Parts List Manual

Service Manual and Parts List Manual Konica Minolta AccurioPress C2070/C2070P/C2060 AccurioPrint C2060L;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Konica high-speed digital printing press.
Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Konica Minolta AccurioPress C2070/C2070P/C2060 AccurioPrint C2060L photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

A) SAFETY AND IMPORTANT WARNING ITEMS
1. IMPORTANT NOTICE
2. DESCRIPTION ITEMS FOR DANGER, WARNING AND CAUTION
2.1 Description items in this Service Manual
2.2 Description items for safety and important warning items
3. SAFETY WARNINGS
3.1 MODIFICATIONS NOT AUTHORIZED BY KONICA MINOLTA, INC
3.1.1 Actions requiring special attention
3.2 POWER PLUG SELECTION
3.2.1 Power Cord Set or Power Plug
3.3 CHECKPOINTS WHEN PERFORMING ON-SITE SERVICE
3.3.1 Power Supply
3.3.2 Installation Requirements
3.3.3 After Service
3.4 FUSE
3.5 Used Batteries Precautions
3.5.1 ALL Areas
3.5.2 Germany
3.5.3 France
3.5.4 Denmark
3.5.5 Finland, Sweden
3.5.6 Norway
4. WARNING INDICATIONS ON THE MACHINE
4.1 Warning indications inside the machine
4.2 Warning indications on the boards
5. MEASURES TO TAKE IN CASE OF AN ACCIDENT

B) NOTATION OF THE CONTENTS
1. PRECAUTION ON HANDLING THIS MANUAL
2. PRODUCT NAME
3. TRADEMARK
3.1 TRADEMARKS OF OTHER COMPANIES
3.2 OWN TRADEMARKS
4. ELECTRICAL PARTS AND SIGNALS
5. PAPER FEED DIRECTION

C) PRODUCT SPECIFICATIONS
1. AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L
1.1 Type
1.2 Functions
1.3 Paper
(1) Size and weight
(2) Type of paper
1.4 Recommended paper
1.4.1 Inch
1.4.2 Metric
1.5 Materials
(1) C2070, C2070P, C2060, C2060L
1.6 Maintenance
1.7 Machine data
1.8 Operating environment
1.9 Note regarding the specifications
2. HT-511
2.1 Type
2.2 Machine data
2.3 Operating environment
2.4 Note regarding the specifications
3. DF-706
3.1 Type
3.2 Functions
3.3 Type of original
3.4 Particular original
3.5 Prohibited original
3.6 Mixed original feed chart
3.7 Machine data
3.8 Operating environment
3.9 Note regarding the specifications
4. PF-602m
4.1 Type
4.2 Functions
4.3 Type of paper
4.4 Maintenance
4.5 Machine data
4.6 Operating environment
4.7 Note regarding the specifications
5. HT-504
5.1 Type
5.2 Machine data
5.3 Operating environment
5.4 Note regarding the specifications
6. HT-505
6.1 Type
6.2 Machine data
6.3 Operating environment
6.4 Note regarding the specifications
7. PF-707
7.1 Type
7.2 Functions
(1) Paper feed
7.3 Type of paper
7.4 Machine data
7.5 Operating environment
7.6 Note regarding the specifications
8. HT-506
8.1 Type
8.2 Machine data
8.3 Operating environment
8.4 Note regarding the specifications
9. LU-202m
9.1 Type
9.2 Functions
9.3 Type of paper
9.4 Maintenance
9.5 Machine data
9.6 Operating environment
9.7 Note regarding the specifications
10. LU-202XL
10.1 Type
10.2 Functions
10.3 Type of paper
10.4 Machine data
10.5 Operating environment
10.6 Note regarding the specifications
11. HT-503/HT-514
11.1 Type
11.2 Machine data
11.3 Operating environment
11.4 Note regarding the specifications
12. MK-746
12.1 Type
12.2 Functions
12.3 Type of paper
12.4 Recommended paper
12.5 Machine data
12.6 Operating environment
12.7 Note regarding the specifications
13. MB-506
13.1 Type
13.2 Functions
13.3 Type of paper
13.4 Machine data
13.5 Operating environment
13.6 Note regarding the specifications
14. MK-744C
14.1 Type
14.2 Functions
14.3 Machine data
14.4 Operating environment
14.5 Note regarding the specifications
15. OT-510
15.1 Type
15.2 Functions
(1) Functions
(2) Maximum tray capacity
15.3 Type of paper
(1) Paper Size
(2) Allowable amount of curling
15.4 Machine data
15.5 Operating environment
15.6 Note regarding the specifications
16. OT-511
16.1 Type
16.2 Functions
16.3 Type of paper
16.4 Machine data
16.5 Operating environment
16.6 Note regarding the specifications
17. EF-103
17.1 Type
17.2 Functions
17.3 Type of paper
17.4 Recommended paper
17.4.1 Inch
17.4.2 Metric
17.5 Machine data
17.6 Operating environment
17.7 Note regarding the specifications
18. MK-740
18.1 Type
18.2 Functions
18.3 Type of paper
18.4 Machine data
18.5 Operating environment
18.6 Note regarding the specifications
19. RU-509
19.1 Type
19.2 Functions
19.3 Type of paper
19.4 Machine data
19.5 Operating environment
19.6 Note regarding the specifications
20. HM-102
20.1 Type
20.2 Function
20.3 Type of paper
20.4 Machine data
20.5 Operating environment
20.6 Note regarding the specifications
21. RU-510
21.1 Type
21.2 Functions
21.3 Type of paper
21.4 Machine data
21.5 Operating environment
21.6 Note regarding the specifications
22. FS-531
22.1 Type
22.2 Function
(1) Functions
(2) Staple
(3) Maximum tray capacity
22.3 Type of paper
(1) Staple mode
22.4 Machine data
22.5 Operating environment
22.6 Note regarding the specifications
23. FS-612
23.1 Type
23.2 Functions
(1) Function
(2) Staple
(3) Folding
(4) Maximum tray capacity*1
23.3 Type of paper
(1) Staple mode
(2) Saddle stitching mode
(3) Half-Fold mode
(4) Tri-folding mode
23.4 Machine data
23.5 Operating environment
23.6 Note regarding the specifications
24. PI-502
24.1 Type
24.2 Functions
24.3 Type of paper
24.4 Machine data
24.5 Operating environment
24.6 Note regarding the specifications
25. PK-512/513
25.1 Type
25.2 Functions
25.3 Type of paper
25.4 Machine data
25.5 Operating environment
25.6 Note regarding the specifications
26. FS-532
26.1 Type
26.2 Functions
(1) Functions
(2) Staple sheet
(3) Staple position
(4) Maximum tray capacity
26.3 Type of paper
26.3.1 Allowable amount of curling
26.4 Machine data
26.5 Operating environment
26.6 Note regarding the specifications
27. SD-510
27.1 Type
27.2 Functions
(1) Functions
(2) Maximum tray capacity
(3) Performance
27.3 Type of paper
(1) Saddle stitching mode
(2) Half-Fold mode
(3) Tri-folding mode
(4) Allowable amount of curling
27.4 Machine data
27.5 Operating environment
27.6 Note regarding the specifications
28. PK-522
28.1 Type
28.2 Functions
28.3 Type of paper
28.4 Machine data
28.5 Operating environment
28.6 Note regarding the specifications
29. MK-732
29.1 Type
29.2 Type of paper
29.3 Machine data
29.4 Operating environment
29.5 Note regarding the specifications
30. LS-506
30.1 Type
30.2 Functions
(1) Function
(2) Maximum tray capacity
30.3 Type of paper
30.4 Machine data
30.5 Operating environment
30.6 Note regarding the specifications
31. FD-503
31.1 Type
31.2 Functions
(1) Function
(2) Maximum tray capacity
31.3 Type of paper
(1) Punching function
(2) Folding functions
(3) PI functions
31.4 Machine data
31.5 Operating environment
31.6 Note regarding the specifications
32. SD-506
32.1 Type
32.2 Functions
(1) Function
(2) Maximum tray capacity
32.3 Type of paper
(1) Straight/sub tray mode
(2) Saddle stitching mode
(3) Trimming mode
(4) Multi-center folding mode
(5) Overlap tri-folding mode
32.4 Machine data
32.5 Operating environment
32.6 Note regarding the specifications
33. SD-513
33.1 Type
33.2 Functions
(1) Functions
(2) Maximum tray capacity
(3) Performance
33.3 Type of paper
(1) Straight, sub tray mode
(2) Saddle stitching mode
(3) Trimming mode
(4) Multi folding mode
(5) Allowable amount of curling
33.4 Machine data
33.5 Operating environment
33.6 Note regarding the specifications
34. CR-101
34.1 Type
34.2 Functions
(1) Functions
(2) Applicable mode and number of creases
(3) Performance
34.3 Type of paper
34.4 Machine data
34.5 Operating environment
34.6 Note regarding the specifications
35. TU-503
35.1 Type
35.2 Functions
(1) Functions
(2) Applicable mode list
(3) Performance
35.3 Type of paper
(1) Slit mode
35.4 Machine data
35.5 Operating environment
35.6 Note regarding the specifications
36. FD-504
36.1 Type
36.2 Functions
(1) Functions
(2) Applicable mode list
(3) Maximum tray capacity
(4) Performance
36.3 Type of paper
36.4 Machine data
36.5 Operating environment
36.6 Note regarding the specifications
37. PB-503
37.1 Type
37.2 Functions
(1) Function
(2) Binding sheets
(3) Maximum tray capacity
(4) Others
37.3 Type of paper
(1) Paper size
(2) Paper weight
(3) Applicable paper in each mode
37.4 Machine data
37.5 Operating environment
37.6 Note regarding the specifications
38. IC-603
38.1 Type
38.2 Functions
38.3 Paper
38.4 Machine data
38.5 Operating environment
38.6 Note regarding the specifications
39. GP-501
39.1 Type
39.2 Modes of Operation
39.3 Machine data
39.4 Software
39.5 Electronic
39.6 Inputs
(1) Media Input from Printer
(2) Power
39.7 Outputs
39.8 Performance
(1) Reliability
39.9 Operation Environment, Storage, Transportation
39.10 Safety/Regulatory
(1) Safety Compliance
(2) Electromagnetic Compliance
39.11 Appendix A
39.12 Appendix B
39.13 Appendix C
39.14 Glossary of Terms
40. GP-502
40.1 Type
40.2 Functions
(1) Function
(2) Binding sheets
(3) Book stock quantity
(4) Others
40.3 Type of paper
(1) Paper size
(2) Paper weight
(3) Type of paper
(4) Recommended paper
40.4 Performance Specifications
(1) Input conditions
(2) Sticking specifications
(3) Book specifications
40.5 Materials
40.6 Machine data
40.7 Operating environment
40.8 Note regarding the specifications

D) OVERALL COMPOSITION
1. SYSTEM CONFIGURATION
1.1 System configuration (C2070/C2070P/C2060)
1.2 System configuration when corresponding the banner print (C2070/C2070P/C2060)
1.3 Configuration for optional device (C2070/C2070P/C2060)
1.3.1 Coupling combination of the main body and the paper feed option
1.3.2 Coupling combination of the main body and the finisher option
1.3.3 Combination of the main body and the image controller (IC) option
1.4 System configuration (C2060L)
1.5 Configuration for optional device (C2060L)
1.5.1 Coupling combination of the main body and the paper feed option
1.5.2 Coupling combination of the main body and the finisher option
1.5.3 Combination of the main body and the image controller (IC) option
2. MAIN BODY UNIT CONFIGURATION
3. PAPER PATH
3.1 Straight paper exit mode
3.2 Reversing exit mode
3.3 Duplex mode
4. CONTROL BLOCK DIAGRAM
5. IMAGE CREATION PROCESS
5.1 Image creation flow and functions
5.2 Charging process (Step 1)
5.3 Laser exposure process (Step2)
5.4 Developing process (Step 3)
5.5 Intermediate transfer process (Step 4)
5.6 2nd transfer process (Step 5)
5.7 Separation process (Step 6)
5.8 Drum cleaning (Sub step 1)
5.9 Exposure before the charge (Sub step 2)
5.10 Transfer belt cleaning (Sub step 3)
5.11 2nd transfer roller/Lw cleaning (Sub step 4)
5.12 Toner collection (Sub step 5)
6. IMAGE CREATION CONTROL
7. PROCESS SPEED
7.1 AccurioPress C2070/C2070P
7.2 AccurioPess C2060/AccurioPrint C2060L

E) SERVICE TOOL
1. AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L
1.1 Service material list
1.1.1 Service material list
1.2 Jig list
1.2.1 Jig list
1.3 Tool list
1.3.1 Tool list
1.4 Mail remote notification system
1.4.1 Outline
1.4.2 Operating environment
1.4.3 Major functions
1.4.4 Initial setting
1.4.5 Operating instructions of the mail remote notification system
1.4.6 Mail sending
1.5 Machine setting data Import
1.5.1 Outline
1.5.2 Setting method
1.6 Job history list
1.6.1 Outline
1.6.2 Major functions
1.6.3 Setting method
1.7 Counter list acquisition using USB memory
1.7.1 Outline
1.7.2 List that can be acquired
1.7.3 Acquisition method
1.8 Panel log
1.8.1 Outline
1.8.2 Log acquisition method
1.9 ORU-M Counter Rewrite
1.9.1 Load from external memory
1.9.2 Store to external memory
1.10 Management Tool
1.10.1 Outline
1.10.2 Installation of Management Tool
1.10.3 Starting up of Management Tool
1.10.4 Technician mode
1.10.5 bizhub PRESS C8000 replacement procedure
1.10.6 bizhub PRESS C7000/6000 replacement procedure
1.10.7 bizhub PRESS 1250/1250P/1052 replacement procedure
1.10.8 bizhub PRESS C1070/C1070P/C71hc/C1060 and bizhub PRO C1060L replacement procedure
1.10.9 bizhub PRESS C1100, 1085 replacement procedure
1.10.10 AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L replacement procedure
1.10.11 Backup file
1.10.12 Administrator mode
1.10.13 Various setting for the software
1.10.14 Error message list
1.11 Machine state log store
1.11.1 Outline
1.11.2 Log acquisition
1.12 Real-time Remote Panel
1.12.1 Setting Up Real-time Remote Panel
1.12.2 Installing Web plugin
1.12.3 Enabling VNC Function of the Machine
1.12.4 Setting Connection to VNC Viewer
1.12.5 Remote Panel Advanced Settings
1.13 Utility (IC card information setting tool)
1.13.1 IC card information setting tool of the AU-201S card reader
1.14 Service assistant tool
1.14.1 Outline
1.14.2 Major functions
1.14.3 Operating instructions of the service assistant tool
1.14.4 About the handling of tool
1.15 CS Remote Analysis
1.15.1 Outline
1.15.2 Function
1.15.3 Setup method
1.15.4 Login method
1.15.5 How to use
1.16 Paper profile
1.16.1 Outline
1.16.2 Operation workflow
1.16.3 How to use

F) PERIODICAL MAINTENANCE
1. MAINTENANCE ITEM
1.1 Maintenance item
1.1.1 Procedure of the periodical maintenance
1.1.2 Condition of the count
1.2 AccurioPress C2070/C2070P
1.2.1 Total counter
1.2.2 Special parts counter
1.3 AccurioPress C2060/AccrioPrint C2060L
1.3.1 Total counter
1.3.2 Special parts counter
1.4 DF-706
1.4.1 Special parts counter
1.5 PF-602m
1.5.1 Total counter
1.5.2 Special parts counter
1.6 PF-707
1.6.1 Total counter
1.6.2 Special parts counter
1.7 LU-202m
1.7.1 Total counter
1.7.2 Special parts counter
1.8 LU-202XL
1.8.1 Total counter
1.8.2 Special parts counter
1.9 MB-506
1.9.1 Special parts counter
1.10 OT-510
1.10.1 Total counter
1.11 EF-103
1.11.1 Special parts counter
1.12 OT-511
1.12.1 Special parts counter
1.13 RU-509, HM-102
1.13.1 Total counter
1.13.2 Special parts counter
1.14 RU-510
1.14.1 Total counter
1.15 FS-531
1.15.1 Total counter
1.15.2 Special parts counter
1.16 FS-612
1.16.1 Total counter
1.16.2 Special parts counter
1.17 PI-502
1.17.1 Total counter
1.17.2 Special parts counter
1.18 FS-532
1.18.1 Total counter
1.18.2 Special parts counter
1.19 SD-510
1.19.1 Total counter
1.19.2 Special parts counter
1.20 PK-522
1.20.1 Total counter
1.21 MK-732
1.21.1 Total counter
1.22 LS-506
1.22.1 Total counter
1.22.2 Special parts counter
1.23 FD-503
1.23.1 Total counter
1.23.2 Special parts counter
1.24 SD-506
1.24.1 Total counter
1.24.2 Special parts counter
1.25 SD-513
1.25.1 Periodical maintenance
1.25.2 Spotted replacement
1.26 CR-101
1.26.1 Periodical maintenance
1.27 TU-503
1.27.1 Periodical maintenance
1.27.2 Spotted replacement
1.28 FD-504
1.28.1 Periodical maintenance
1.28.2 Spotted replacement
1.29 PB-503
1.29.1 Total counter
1.29.2 Special parts counter
1.30 GP-501
1.30.1 Total counter
1.30.2 Special parts counter
1.31 GP-502
1.31.1 Total counter
1.31.2 Special parts counter
2. PERIODICALLY REPLACED PARTS LIST
2.1 Periodical replacement parts
2.2 AccurioPress C2070/C2070P/C2060/AccrioPrint C2060L
2.3 DF-706
2.4 PF-602m
2.5 PF-707
2.6 LU-202m
2.7 LU-202XL
2.8 MB-506
2.9 EF-103
2.10 OT-511
2.11 RU-509, HM-102
2.12 RU-510
2.13 FS-531
2.14 FS-612
2.15 PI-502
2.16 FS-532
2.17 SD-510
2.18 LS-506
2.19 FD-503
2.20 SD-506
2.21 SD-513
2.21.1 Spotted replacement parts list
2.22 TU-503
2.22.1 Spotted replacement parts list
2.23 FD-504
2.23.1 Spotted replacement parts list
2.24 PB-503
2.25 GP-501
2.25.1 Option
2.26 GP-502
3. ORU-M PARTS
3.1 Life value of the ORU-M parts
(1) ORU-M corresponding parts
3.2 ORU-M parts list
(1) ORU-M parts list
3.3 ORU-M parts replacement timing
(1) ORU-M target unit life setting
(2) ORU-M warning icon display
3.4 Management of ORU-M parts counter
(1) Counter display
(2) Counter clear
(3) Replacement of envelope fusing unit in the ORU-M mode
4. LIFE VALUE
4.1 Life value of materials/parts
4.2 Life value determining condition
5. PERIODICAL MAINTENANCE PROCEDURE AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L
5.1 External section
5.1.1 Replacement of the developing dust-proof filter/1, the developing dust-proof filter/2, the PH dust-proof filter and the
suction dust-proof filter
5.1.2 Replacement of the filter box
5.1.3 Replacement of the electric component cooling filter
5.2 Write section
5.2.1 Cleaning the dust proof glass
5.3 Photo conductor section
5.3.1 Pulling out the process unit
5.3.2 Cleaning around the process unit
5.3.3 Replacing the drum unit
5.4 Charging section
5.4.1 Replace the charging corona
5.4.2 Cleaning the charging corona
5.5 Developing section
5.5.1 Developer charging procedures
5.5.2 Replacing the Developing unit/Y, /M, /C, /K
5.6 Intermediate transfer section
5.6.1 Removing/reinstalling the intermediate transfer unit
5.6.2 Replacing the transfer belt cleaning unit
5.6.3 Replacing the belt cleaning blade and the side seal
5.6.4 Replacing the toner collection sheet
5.6.5 Replacing the transfer belt separation claw
5.6.6 Replacing the intermediate transfer belt, and cleaning of the rollers and the cleaning sheet
5.6.7 Replacing the 1st transfer roller/Y, /M, /C and /K and the transfer roller bearing/Y, /M, /C and /K
5.6.8 Replacing the 2nd transfer roller/Up
5.6.9 Replacing the belt separation claw solenoid (SD2)
5.6.10 Removing and reinstalling the 2nd transfer unit
5.6.11 Replacing the 2nd transfer roller/Lw and the C-clip, and cleaning around the 2nd transfer unit
5.6.12 Replacing the separate discharging unit
5.6.13 Replacing the 2nd transfer earth plate assy
5.7 Toner collection section
5.7.1 Replacing the waste toner box
5.8 Paper feed section
5.8.1 Replacement of the pick-up roller/1, pick-up roller/2, paper feed roller rubber/1 and paper feed roller rubber/2
5.8.2 Replacement of the separation roller rubber/1 and separation roller rubber/2
5.8.3 Cleaning the slide sheet
5.8.4 Replacement of the paper feed clutch/1 (CL1), paper feed clutch/2 (CL2), pre-registration clutch/1 (CL3) and preregistration
clutch/2 (CL4)
5.9 Vertical conveyance section
5.9.1 Replacement of the intermediate conveyance clutch/1 (CL5)
5.10 Registration section
5.10.1 Replacing the registration cleaning sheet assy
5.10.2 Cleaning of the registration cleaning sheet assy
5.10.3 Replacing the registration roller and the registration roller bearing, cleaning the registration swing home sensar (PS20)
5.10.4 Replacing the registration idler gear
5.11 Fusing section
5.11.1 Removing/reinstalling the fusing unit
5.11.2 Replacement of the fusing heater lamp assy/Up and the neutralizing flat spring assy
5.11.3 Replacement of the fusing bearing/Up, /Lw1, the heat insulating sleeve/Up, /Lw1, the belt regulating sleeve, the fusing
belt, the fusing roller/1, /2, and the neutralizing ring
5.11.4 Replacement of the fusing temperature sensor/3 (TH3)
5.11.5 Replacement of the fusing gear/1, fusing bearing/Lw2, heat insulating sleeve/Lw2, fusing roller/Lw
5.11.6 Replacement of the fusing temperature sensor/4 (TH4)
5.11.7 Replacement of the fusing gear/2, the fusing gear/3
5.11.8 Replacement of the fusing separating claw assy
5.11.9 Replacing the fusing paper exit roller/Up
5.12 Duplex section
5.12.1 Replacement of the intermediate conveyance clutch/2 (CL6), and the intermediate conveyance clutch/3 (CL7)
5.13 Reverse and exit section
5.13.1 Replacing the reverse de-curler roller
5.13.2 Replacing the paper exit drive gear, paper exit gear and paper exit decurler roller
5.14 Charge control section
5.14.1 Replacing the Charging Roller/Up
5.14.2 Replacing the charging roller bearing/Fr and charging roller bearing/Rr
6. PERIODICAL MAINTENANCE PROCEDURE DF-706
6.1 Take-up section
6.1.1 Cleaning of the pick-up roller/feed roller
6.1.2 Cleaning of the separation roller
6.1.3 Cleaning the torque limiter
6.1.4 Replacing the pick-up roller/feed roller
6.1.5 Replacing the separation roller
6.1.6 Cleaning of the reflective sensor section
6.2 Transport section
6.2.1 Cleaning of the miscellaneous rolls
6.2.2 Cleaning of the miscellaneous rollers
6.3 Scanning section
6.3.1 Cleaning of the front side scanning guide
7. PERIODICAL MAINTENANCE PROCEDURE PF-602m
7.1 Precautions on maintenance
7.2 Tray section
7.2.1 Precautions on maintenance of the tray section
7.2.2 Replacing the Pick-up rubber/paper feed roller
7.2.3 Replacing the separation roller
7.2.4 Replacing the paper feed clutch (CL1/CL4) and the separation clutch (CL2/CL5)
7.3 Conveyance section
7.3.1 Replacing the vertical conveyance clutch/1 (CL7), /2 (CL8), and /3 (CL9)
7.3.2 Replacing the horizontal conveyance clutch/1 (CL10), /2 (CL11), and pre-registration clutch (CL12)
8. PERIODICAL MAINTENANCE PROCEDURE PF-707
8.1 Precautions on maintenance
8.2 Paper feed tray section
8.2.1 Replacing the loop roller/Lw and the loop roller bearing/Lw
8.3 Paper feed suction section
8.3.1 Replacing the suction belt clutch/1 (CL15), the suction belt clutch/2 (CL16), the suction belt clutch/3 (CL17)
8.4 Vertical conveyance section
8.4.1 Replacement of the exit clutch/1 (CL1), /2 (CL2), the vertical conveyance clutch/1 (CL3), /2 (CL4) ,the vertical
conveyance clutch/3 (CL5) and /4 (CL6)
8.5 Horizontal conveyance section
8.5.1 Replacing the pre-registration clutch (CL7) and the horizontal conveyance clutch/1 (CL8), horizontal conveyance clutch/
2 (CL9)
8.5.2 Replacing the pre-registration roller and the pre-registration bearing
8.5.3 Replacing the horizontal conveyance roller/1, /2, the horizontal conveyance roller bearing/1, /2
8.5.4 Replacing the loop roller/Up
8.5.5 Replacement of the roller pressure release motor (M10)
9. PERIODICAL MAINTENANCE PROCEDURE LU-202m/LU-202XL
9.1 Paper feed section
9.1.1 Precautions on maintenance
9.1.2 Cleaning the pre-registration roller
9.1.3 Replacing the pre-registration roller
9.1.4 Removing/installing paper feed roller Assy
9.1.5 Replacing the paper feed roller/pick-up roller
9.1.6 Replacing the separation roller
9.1.7 Replacing paper feed clutch (CL101) /pre-registration clutch (CL102)
10. PERIODICAL MAINTENANCE PROCEDURE MB-506
10.1 Precautions on maintenance
10.2 Paper feed section
10.2.1 Replacing the pick-up roller/BP, the paper feed roller rubber/BP, and the paper feed clutch/BP (CL14)
10.2.2 Replacing the separation roller rubber/BP
11. PERIODICAL MAINTENANCE PROCEDURE OT-511
11.1 Replacing the paper hold roller
11.1.1 Periodically replaced parts and cycle
11.1.2 Procedure
11.2 Replacing the paper exit roller
11.2.1 Periodically replaced parts and cycle
11.2.2 Procedure
11.3 Replacing the paper exit driven roller/2
11.3.1 Periodically replaced parts and cycle
11.3.2 Procedure
12. PERIODICAL MAINTENANCE PROCEDURE EF-103
12.1 Precautions on maintenance
12.2 Fusing section
13. PERIODICAL MAINTENANCE PROCEDURE RU-509/HM-102
13.1 Precautions on maintenance
13.2 Output paper density detection section
13.2.1 Cleaning the shutter
13.3 Humidification section (HM-102)
13.3.1 Replacing the humidification rollers/Rt, /Lt and the water feed roller
13.3.2 Replacing the water feed filter
14. PERIODICAL MAINTENANCE PROCEDURE RU-510
14.1 Precautions on maintenance
14.2 Conveyance section
14.2.1 Replacing the paper re-feed roller drive gear/1 and the paper re-feed roller drive gear/2
14.2.2 Replacing the entrance conveyance motor (M1), the entrance conveyance belt, the paper exit motor (M2), the paper exit conveyance belt
14.2.3 Replacing the paper exit pulley and the conveyance pulley
14.2.4 Replacing the entrance roller/1, /2, paper exit roller, bearing /K and bearing assy
14.2.5 Replacing the merging section roller and bearing/K
14.2.6 Replacing the stacker entrance roller and bearing/K
14.2.7 Replacing the re-feed roller and bearing/K
14.2.8 Replacing the driven roller
14.2.9 Replacing the straight gate
14.2.10 Replacing the stack switch motor (M6)
15. PERIODICAL MAINTENANCE PROCEDURE FS-531
15.1 Precautions on maintenance
15.2 Conveyance section
15.2.1 Replacing the intermediate conveyance roller (sponge roller)
15.3 Main tray section
15.3.1 Replacing the paper exit roller (sponge roller)
15.4 Stacker section
15.4.1 Replacing the paper assist roller (sponge roller)
15.4.2 Replacement of the cleaning plate Assy
15.5 Stapler section
15.5.1 Replacing the stapler unit
16. PERIODICAL MAINTENANCE PROCEDURE FS-612
16.1 Precautions on maintenance
16.2 Conveyance section
16.2.1 Replacing the intermediate conveyance roller (sponge roller)
16.3 Main tray section
16.3.1 Replacing the paper exit roller (sponge roller)
16.4 Stacker section
16.4.1 Replacing the paper assist roller (sponge roller)
16.5 Stapler section
16.5.1 Removing/reinstalling the stapler unit cover
16.5.2 Replacing the stapler unit
17. PERIODICAL MAINTENANCE PROCEDURE PI-502
17.1 Precautions on maintenance
17.2 Paper feed section
17.2.1 Replacing the pick-up roller/Up and the paper feed roller/Up
17.2.2 Replacing the pick-up roller/Lw and the paper feed roller/Lw
17.2.3 Replacing the separation roller/Up and the torque limiter/Up
17.2.4 Replacing the separation roller/Lw and the torque limiter/Lw
17.2.5 Replacing the paper feed clutch/Up (CL201) and the paper feed clutch/Lw (CL202)
18. PERIODICAL MAINTENANCE PROCEDURE FS-532
18.1 Precautions on maintenance
18.2 Paper conveyance section
18.2.1 Lubrication of the FNS entrance roller conveyance switching cam, the FNS entrance roller conveyance switching gate/ Up
18.3 Stacker section
18.3.1 Replacing the paddle
18.3.2 Lubrication of the stapler shaft and the rear stopper shaft
18.4 Stapler section
18.4.1 Replacing the stapler unit
18.5 Main tray section
18.5.1 Cleaning and lubrication of the paper exit alignment plate shaft
19. PERIODICAL MAINTENANCE PROCEDURE SD-510
19.1 Precautions on maintenance
19.2 Alignment section
19.2.1 Replacing the paddle/1, the paddle/2, and the paddle/3
19.3 Stapler section
19.3.1 Replacing the stapler unit
19.3.2 Cleaning and lubrication of the staple guide/Up and the staple guide/Lw
19.4 Half-fold/folding&staple/tri-folding section
19.4.1 Cleaning the folding roller/1, the folding roller/2
20. PERIODICAL MAINTENANCE PROCEDURE LS-506
20.1 Precautions on maintenance
20.2 Conveyance section
20.2.1 Replacing the stacker tray up down motor (M1)
20.2.2 Replacing the paper press solenoid/3 (SD8)
20.2.3 Replacing the paper press solenoid/1 (SD6)
20.2.4 Replacing the paper press solenoid/2 (SD7)
20.2.5 Replacing the rear stopper solenoid (SD3)
21. PERIODICAL MAINTENANCE PROCEDURE FD-503
21.1 Precautions on maintenance
21.2 Conveyance section
21.2.1 Replacing roller solenoids/1 (SD5) to /4 (SD8)
21.3 Punch section
21.3.1 Replacing the punch unit
21.3.2 Cleaning the punch shaft and the punch support board
21.3.3 Lubricating the punch drive section
21.4 Folding conveyance section
21.4.1 2nd folding roller solenoid (SD18)
21.5 Main tray section
21.5.1 Replacing the tray up down motor (M11)
21.6 PI section
21.6.1 Replacing the pick-up rubber (Upper stage)
21.6.2 Replacing the paper feed rubber (Upper stage)
21.6.3 Replacing the separation rubber (upper stage)
21.6.4 Replacing the pick-up rubber (Lower stage)
21.6.5 Replacing the paper feed rubber (lower stage)
21.6.6 Replacing the separation rubber (lower stage)
22. PERIODICAL MAINTENANCE PROCEDURE SD-506
22.1 Precautions on maintenance
22.2 Right angle conveyance section
22.2.1 Replacing the roller release solenoid/1 (SD5)
22.2.2 Replacing the roller release solenoid/2 (SD6)
22.2.3 Replacing the right angle conveyance gate solenoid (SD2)
22.2.4 Replacing the roller release solenoid/3 (SD7)
22.3 Saddle stitching section
22.3.1 Replacing the stapler assy
22.3.2 Replacing the slope unit
22.3.3 Pulling out the saddle stitching unit
22.3.4 Replacing the saddle stitching unit
22.4 Bundle processing section
22.4.1 Replacing the bundle press stage gear
22.4.2 Replacing the bundle press stage unit
22.5 Trimmer section
22.5.1 Removing/installing the trimmer paddle assy
22.5.2 Replacing the trimmer board assy
22.5.3 Replacing the trimmer blade kit
22.5.4 Replacing the trimmer press motor (M32)
22.5.5 Replacing the trimmer blade motor (M31)
22.5.6 Replacing the trimming unit
22.5.7 Lubrication to the trimmer unit
23. PERIODICAL MAINTENANCE PROCEDURE SD-513
23.1 Precautions on maintenance
23.2 Entrance conveyance section
23.2.1 Replacing the reverse exit roller pressure release motor (M102)
23.2.2 Cleaning of the paper re-feed roller/Lt
23.2.3 Cleaning of the reverse exit roller/Rt
23.3 Folding conveyance section
23.3.1 Replacing the 1st folding knife motor (M13)
23.3.2 Replacing the 2nd folding knife motor (M14)
23.3.3 Cleaning of the 1st folding roller, 2nd folding roller
23.3.4 Lubrication to the front stopper shaft
23.4 Sub tray, tri-folding tray section
23.4.1 Cleaning the tri-folding tray conveyance roller/3
23.5 Saddle stitching section
23.5.1 Replacing the staple unit
23.5.2 Replacing the clincher
23.5.3 Replacing the booklet holding motor (M17)
23.5.4 Lubrication to the saddle stitching alignment plate/Rr
23.5.5 Lubrication to the saddle stitching alignment plate shaft/Fr
23.5.6 Replacing the conveyance guide assy/Up
23.5.7 Replacing the alignment plate solenoid wiring
23.6 Booklet movement section
23.6.1 Lubrication to the booklet movement unit slide shaft
23.6.2 Lubrication to the booklet holding unit slide shaft
23.6.3 Lubrication to the booklet set unit slide shaft
23.7 Clamp section
23.7.1 Replacing the fore edge stopper motor (M24)
23.7.2 Replacing the fore edge finger motor (M52), the fore-edge finger gear, and the finger torque limiter
23.7.3 Replacing the clamp motor (M23)
23.7.4 Replacing the booklet holding wire/1, booklet holding wire/2 and booklet holding wire/3
23.7.5 Replacing the clamp hanging wire
23.8 Trimmer section
23.8.1 Replacing the trimmer blade
23.8.2 Replacing the trimmer board
23.8.3 Replacing the trimming unit
23.8.4 Replacing the trimmer blade motor (M31)
23.8.5 Replacing the trimmer press motor (M32)
23.8.6 Lubrication to the press drive screw, the gear
23.9 Booklet tray section
23.9.1 Replacing the gripper motor (M26)
23.9.2 Lubrication to the gripper paper exit gear/Fr, the gripper paper exit gear/Rr
23.9.3 Lubrication to the gripper lock plate
23.9.4 Lubrication to the shutter slide shaft and the shutter slide plate
24. PERIODICAL MAINTENANCE PROCEDURE CR-101
24.1 Precautions on maintenance
24.2 Creaser section
24.2.1 Cleaning the crease blade
25. PERIODICAL MAINTENANCE PROCEDURE TU-503
25.1 Precautions on maintenance
25.2 Conveyance section
25.2.1 Cleaning the registration roller
25.2.2 Replacing the registration roller
25.3 Slitter section
25.3.1 Lubrication to the slit cutter shaft
25.3.2 Lubrication to the slit cutter drive gear
25.3.3 Replacing the slit cutter assy/Fr, /Rr
25.4 Rotary cutter section
25.4.1 Replacing the rotary cutter assy
25.4.2 Cleaning the slit scraps roller/Lt and slit scraps roller/Rt
26. PERIODICAL MAINTENANCE PROCEDURE FD-504
26.1 Precautions on maintenance
26.2 Clamp section
26.2.1 Lubrication to FD clamp
26.2.2 Replacing the FD clamp motor/Rr (M202)
26.2.3 Replacing the FD clamp motor/Fr (M203)
26.3 Spine corner forming sction
26.3.1 Replacing the FD roller motor (M201)
26.3.2 Replacing the FD roller cleaning assy/Fr, /Rr
27. PERIODICAL MAINTENANCE PROCEDURE PB-503
27.1 Conveyance section
27.1.1 Replacement of the entrance gate solenoid (SD1), the sub tray paper exit solenoid (SD4)
27.2 Sub compile (SC) section
27.2.1 Precautions on maintenance
27.2.2 Replacing the switchback roller
27.2.3 Replacing the SC switchback release motor (M13) and the one-way clutches/A and /B
27.2.4 Replacing the SC pressure arm solenoid (SD13)
27.2.5 Replacing the FD alignment solenoid (SD11)
27.2.6 Lubrication to the sub scan alignment plate shaft
27.3 Clamp section
27.3.1 Lubrication to the clamp pressing board shaft
27.4 Glue tank section
27.4.1 Replacing the glue apply roller drive gear bearing
27.4.2 Lubrication to the glue apply roller drive gear
27.4.3 Replacing the pellet supply cooling fan (FM4)
27.4.4 Replacing the glue tank assy
27.5 Cover paper supply section
27.5.1 Removing/reinstalling the pick-up roller assy and the separation roller assy
27.5.2 Replacing the pick-up roller and the paper feed roller
27.5.3 Replacing the separation roller
27.5.4 Replacing the cover paper pick-up clutch (CL71) and the cover paper separation clutch (CL72)
27.6 Cover paper table section
27.6.1 Precautions on maintenance
27.6.2 Replacing the roller cutter blade assy
27.6.3 Cleaning the cover paper folding plate and the book spine backing plate
27.6.4 Lubrication to the cover paper alignment plate shaft
27.7 Book stock section
27.7.1 Lubrication to the guide shafts/Rt and /Lt
27.8 Framework section
27.8.1 Replacing the exhaust filters/A and /B
28. PERIODICAL MAINTENANCE PROCEDURE GP-501
28.1 Caution for maintenance procedure
28.2 DIE SET SERVICE
28.2.1 Die Set Service
28.2.2 Die Set Life Expectancy
28.2.3 Die Set Components
28.2.4 Checking and Replacing the Die Set
28.2.5 Checking and lubricating the Die Set pins and Die Set shoulder bolts
28.2.6 Hole Alignment inspection
28.3 CHECK, CLEANING, AND LUBRICATION
28.3.1 CHECK, CLEANING, AND LUBRICATION
28.3.2 External Cleaning
28.3.3 Internal Cleaning
28.3.4 Operational Inspection
28.3.5 Internal Inspection
28.3.6 Cleaning the base
28.3.7 Cleaning the Die guide
28.3.8 Checking the Door Latch
28.3.9 Cleaning and Checking the aligner paper path and panels
28.3.10 Cleaning and Checking the Aligner Idler Roller
28.3.11 Cleaning the Aligner (Green) Drive Belt
28.3.12 Cleaning and Checking the Back Gauge Solenoid
28.3.13 Cleaning and Checking the Idler Rollers
28.3.14 Cleaning and Checking the punch idler rollers
28.3.15 Cleaning and Checking the Drive Rollers
28.3.16 Checking the Aligner Latch
28.3.17 Cleaning the Optical Sensors
28.3.18 Cleaning and Checking the Bypass Paper Path
28.3.19 Cleaning and Checking the Punch Paper Path
28.3.20 Cleaning and Checking the Timing Belt
28.3.21 Bypass panel
28.3.22 Bypass panel Removal
28.3.23 Aligner panels
28.3.24 Aligner Panel Removal
28.3.25 Aligner Idler Roller Replacement
28.3.26 Aligner Drive Belt Replacement
28.3.27 Cleaning and checking the energy drive roller
28.3.28 Replacing the back gauge mechanism
28.3.29 Back Gauge Removal
28.3.30 Solenoid Spring Replacement
28.3.31 Back Gauge Paddle
28.3.32 Back Gauge Assembly Adjustment
28.3.33 Punch module
28.3.34 Punch Module Removal
28.3.35 Lubricating to the Punch Drive Cams
28.3.36 Punch Clutch Replacement
28.3.37 Punch Module Brake Replacement and Adjustment
28.3.38 Punch Module Brake Replacement
28.3.39 Punch Module Brake Adjustment
28.3.40 Punch Module Motor Replacement
28.3.41 Punch Module Motor Drive Belt Replacement
28.3.42 Punch Module Drive Roller Replacement
28.3.43 Belt replacement
28.3.44 Tools
29. PERIODICAL MAINTENANCE PROCEDURE GP-502

G) DISASSEMBLING/REASSEMBLING
1. ITEMS THAT YOU MUST NOT DISASSEMBLE
1.1 List of Items that you must not disassemble
1.2 Items that you must not disassemble
1.2.1 Screw-lock applied screw
1.2.2 Prohibition of adjusting the volume of boards
1.2.3 CCD unit
1.2.4 Writing unit cover
1.2.5 Photo conductor section
1.2.6 Intermediate transfer section
1.2.7 Registration section
1.2.8 Fusing section
2. WARNING AND PRECAUTION ON DISASSEMBLING
2.1 Precaution on removing the boards
3. AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L
3.1 List of disassembling and assembling parts
3.2 Disassembling and assembling procedures
3.2.1 Precautions on disassembling and assembling
3.2.2 Duct cover
3.2.3 Rear cover
3.2.4 Left cover
3.2.5 Right cover/Up1, right cover/Up2, right cover/Up3, right cover/Up4, right cover/Lw1, right cover/Lw2
3.2.6 Top cover/Fr, top cover/Rt, top cover/Rr1, top cover/Rr2, top cover/Lt, arm cover/Fr, arm cover/Rr
3.2.7 Main board unit
3.2.8 Overall control board (OACB)
3.2.9 SSD (SSD)
3.2.10 Original glass assy
3.2.11 WT-511 (Option)
3.2.12 CCD unit
3.2.13 LED exposure unit
3.2.14 Scanner drive board (SCDB)
3.2.15 Scanner motor (M201)
3.2.16 Writing unit
3.2.17 Process unit
3.2.18 Image correction unit
3.2.19 Toner bottle motor, toner bottle clutch, remaining toner sensor, toner supply motor
3.2.20 Duplex section
3.2.21 Paper feed tray
3.2.22 Tray up down wire/1, tray up down wire/2 (Tray1)
3.2.23 Tray up down wire/3, tray up down wire/4 (Tray2)
3.2.24 Tray up down wire/5 (Tray2)
3.2.25 Fusing paper exit plate assy
3.2.26 Temperature sensor/1 (TH1), temperature sensor/2 (TH2), thermostat/1 (TS1), thermostat/2 (TS2)
3.2.27 Thermostat/3 (TS3)
3.2.28 Temperature sensor/5 (TH5)
3.2.29 Fusing separation fan/1 (FM10), fusing separation fan/2 (FM11) and fusing separation fan/3 (FM12)
3.2.30 HDD1, HDD2, HDD3
3.2.31 Hard disk/4 (HDD4)
3.2.32 Charge control framework unit
3.2.33 Tucking fan/4 (FN35) and tucking fan/5 (FM36)
4. DF-706
4.1 List of disassembling and assembling parts
4.2 Disassembling and assembling procedures
4.2.1 Front cover
4.2.2 Rear cover
4.2.3 DF-706
4.2.4 Front side glass cleaning roller unit
4.2.5 Back side glass cleaning roller unit
4.2.6 CIS module (CIS)
4.2.7 DF control board (DFCB)
4.2.8 Restriction plate positional volume (VR1)
4.2.9 DF power supply (DFPU)
4.2.10 Sensor control board (SCB)
4.2.11 Multi feed detection board/1 (transmitter) (MFDB/1)
4.2.12 Multi feed detection board/2 (receiver) (MFDB/2)
4.2.13 Take-up motor (M1)
4.2.14 Registration motor (M2)
4.2.15 Reading motor (M3)
4.2.16 Exit motor (M4)
4.2.17 Reading roller pressure/retraction motor (M6)
4.2.18 Back side cleaning motor (M7)
4.2.19 Front side cleaning motor (M8)
4.2.20 Take-up clutch (CL1)
4.2.21 Cooling fan motor (FM)
4.2.22 Replacing the separation roller torque limiter
5. PF-602m
5.1 List of disassembling and assembling parts
5.2 Disassembling and assembling procedures
5.2.1 Precautions on disassembling and assembling
5.2.2 Right cover
5.2.3 Rear cover/Lt2
5.2.4 The rear cover/Lt1 and /Rt
5.2.5 Front door
5.2.6 Tray
5.2.7 Lift wire
5.2.8 Paper lift motor/1 (M2) and /2 (M3)
5.2.9 Vertical conveyance unit
5.2.10 Horizontal conveyance unit
5.2.11 The multi feed detection board (MFDBR and MFDBS)
6. PF-707
6.1 Items you must not disassemble or reassemble
6.1.1 Framework panel/1, framework panel/2
6.2 List of disassembling and assembling parts
6.3 Disassembling and assembling procedures
6.3.1 Precautions on disassembling and assembling
6.3.2 Right cover
6.3.3 Rear cover/Lt4
6.3.4 Rear cover/Lt2, rear cover/Lt3
6.3.5 Rear cover/Lt1
6.3.6 Rear cover/Rt
6.3.7 Front door
6.3.8 Tray front cover
6.3.9 Tray
6.3.10 Lift wire
6.3.11 Paper leading edge separation fan /Fr1 (FM9), /Fr2 (FM13), /Fr3 (FM17), /Rr1 (FM4), /Rr2 (FM8), /Rr3 (FM12)
6.3.12 Paper leading edge shutter solenoid /1 (SD10), /2 (SD14), /3 (SD18)
6.3.13 Paper lift motor /1 (M7), /2 (M8), /3 (M9)
6.3.14 Paper feed suction unit
6.3.15 Paper feed belt
6.3.16 Paper suction fan/1 (FM1), /2 (FM2), /3 (FM3), /4 (FM4), /5 (FM5), /6 (FM6)
6.3.17 Paper feed assist fan/Fr1 (FM11), /Fr2 (FM15), /Fr3 (FM19), /Rr1 (FM12), /Rr2 (FM16), /Rr3 (FM20)
6.3.18 Shutter solenoid/Fr1 (SD5), /Fr2 (SD10), /Fr3 (SD15), /Rr1 (SD6), /Rr2 (SD11), /Rr3 (SD16)
6.3.19 Paper feed check window
6.3.20 Vertical conveyance unit
6.3.21 Horizontal conveyance unit
6.3.22 Multi feed detection board (MFDBR, MFDBS)
7. LU-202m/LU-202XL
7.1 List of disassembling and assembling parts
7.2 Disassembling and assembling procedures
7.2.1 Precautions on disassembling and assembling
7.2.2 Upper door
7.2.3 Upper door/Rt (LU-202XL)
7.2.4 The clutch cover
7.2.5 The paper feed cover
7.2.6 Right cover (LU-202m)
7.2.7 Right cover (LU-202XL)
7.2.8 Front cover (LU-202m)
7.2.9 Front cover (LU-202XL)
7.2.10 Rear cover (LU-202m)
7.2.11 Rear cover (LU-202XL)
7.2.12 Replacing the lift wire (LU-202m)
7.2.13 Replacing the lift wire (LU-202XL)
7.2.14 Paper size VR (VR1) (LU-202m)
7.2.15 Paper size VR (VR1) (LU-202XL)
7.2.16 Replacing the multi feed detection board (LU-202XL)
8. MB-506
8.1 List of disassembling and assembling parts
8.2 Disassembling and assembling procedures
8.2.1 Precautions on disassembling and assembling
8.2.2 Paper size VR/BP (VR3)
9. MK-744C
9.1 List of disassembling and assembling parts
9.2 Disassembling and assembling procedures
9.2.1 Precautions on disassembling and assembling
9.2.2 Status indicator light
10. OT-510
10.1 Items not allowed to be disassembled/reassembled
10.1.1 Screws painted in red
10.2 List of disassembling and assembling parts
10.3 Disassembling and assembling procedures
10.3.1 Precautions on disassembling and assembling
10.3.2 Front door
10.3.3 Rear cover
10.3.4 Upper cover /Rt1
10.3.5 Upper cover /Rt2
10.3.6 Upper cover /Fr1
10.3.7 Upper cover /Fr2
10.3.8 Upper cover /Rr
10.3.9 Upper cover /Md
10.3.10 Sub tray
10.3.11 Main tray
10.3.12 Main tray up down motor (M11), main tray up-down drive assy
10.3.13 Note for replacing the board
11. OT-511
11.1 List of disassembling and assembling parts
11.2 Disassembling and assembling procedures
11.2.1 Paper exit unit
11.2.2 Left cover/Up, /Lw
11.2.3 Rear cover
11.2.4 Conveyance door
12. EF-103
12.1 List of disassembling and assembling parts
13. MK-740
13.1 List of disassembling and assembling parts
13.2 Disassembling and assembling procedures
13.2.1 Paper feed tray
13.2.2 Paper exit tray
14. RU-509/HM-102
14.1 Items you must not disassemble or reassemble
14.1.1 Color density sensor unit
14.2 List of disassembling and assembling parts
14.3 Disassembling and assembling procedures
14.3.1 Precautions on disassembling and assembling
14.3.2 Front door
14.3.3 Rear cover
14.3.4 Upper cover
14.3.5 Humidification unit
14.3.6 Water feed tank
14.3.7 Pump motor (P1)
14.3.8 Color density sensor unit
14.3.9 Shutter
14.3.10 Note for replacing the board
15. RU-510
15.1 List of disassembling and assembling parts
15.2 Disassembling and assembling procedures
15.2.1 Precautions on disassembling and assembling
15.2.2 Front door
15.2.3 Rear cover
15.2.4 Left cover
15.2.5 Upper cover
15.2.6 Note for replacing the board
16. FS-531
16.1 List of disassembling and assembling parts
16.2 Disassembling and assembling procedures
16.2.1 Precautions on disassembling and assembling
16.2.2 Upper cover/1
16.2.3 Upper cover/2
16.2.4 Front door
16.2.5 Rear cover
16.2.6 Left cover
16.2.7 Main tray
16.2.8 Replacing the up down wire
16.2.9 Stacker unit
16.2.10 Paper exit opening unit
16.2.11 Note for replacing the board
17. FS-612
17.1 Items that you must not disassemble or reassemble
17.1.1 Screw not allowed to be removed on the folding stopper
17.2 List of disassembling and assembling parts
17.3 Disassembling and assembling procedures
17.3.1 Precautions on disassembling and assembling
17.3.2 Upper cover/1
17.3.3 Upper cover/2
17.3.4 Front door
17.3.5 Rear cover
17.3.6 Left cover
17.3.7 Main tray
17.3.8 Replacing the up down wire
17.3.9 Stacker unit cover
17.3.10 Stacker unit
17.3.11 Paper exit opening unit
17.3.12 Note for replacing the board
18. PK-512/513
18.1 Items that you must not disassemble and adjust
18.1.1 Punch unit
18.2 Disassembly/reassembly parts list
18.3 Disassembly/reassembly procedure
18.3.1 Precautions on disassembling and assembling
18.3.2 Punch unit
19. PI-502
19.1 List of disassembling and assembling parts
19.2 Disassembling and assembling procedures
19.2.1 Precautions on disassembling and assembling
19.2.2 Upper cover
19.2.3 Rear cover
19.2.4 Operation panel cover
19.2.5 PI unit
20. FS-532
20.1 Items that you must not disassemble or reassemble
20.1.1 Red-painted screws
20.2 List of disassembling and assembling parts
20.3 Disassembling and assembling procedures
20.3.1 Precautions on disassembling and assembling
20.3.2 Front door
20.3.3 Rear cover
20.3.4 Upper cover/Rt1
20.3.5 Upper cover/Rt2
20.3.6 Upper cover/Fr1
20.3.7 Upper cover/Fr2
20.3.8 Upper cover/Rr
20.3.9 Upper cover/Md
20.3.10 Front cover
20.3.11 Sub tray
20.3.12 Stacker unit
20.3.13 Main tray
20.3.14 Main tray up down motor (M11), main tray up-down drive assy
20.3.15 Note for replacing the board
21. SD-510
21.1 Items that you must not disassemble or reassemble
21.1.1 Red-painted screws
21.2 List of disassembling and assembling parts
21.3 Disassembling and assembling procedures
21.3.1 Precautions on disassembling and assembling
21.3.2 Front cover
21.3.3 Stapler unit cover
21.3.4 SD unit
21.3.5 Folding knife assy/1
21.3.6 Folding knife assy/2
22. PK-522
22.1 Items that you must not disassemble or reassemble
22.1.1 Red-painted screws
22.2 List of disassembling and assembling parts
22.3 Disassembling and assembling procedures
22.3.1 Precautions on disassembling and assembling
22.3.2 Punch unit
23. LS-506
23.1 List of disassembling and assembling parts
23.2 Disassembling and assembling procedures
23.2.1 Precautions on disassembling and assembling
23.2.2 Cover
23.2.3 Replacing the stacker tray up/down wire
24. FD-503
24.1 Items that you must not disassemble or reassemble
24.1.1 Folding/conveyance switching position adjustment section
24.2 List of disassembling and assembling parts
24.3 Disassembling and assembling procedures
24.3.1 Precautions on disassembling and assembling
24.3.2 Upper cover/Fr + PI cover/Fr
24.3.3 Upper cover/Rr + PI cover/Rr
24.3.4 Upper door
24.3.5 Rear cover
24.3.6 Left cover/Fr
24.3.7 Left cover/Rr
24.3.8 Paper exit stopper cover
24.3.9 Right cover
24.3.10 Left cover/Up
24.3.11 Mount cover
24.3.12 Front door
24.3.13 Cleaning the 2nd folding conveyance sensor (PS53)
24.3.14 Cleaning the 3rd folding conveyance sensor (PS54)
24.3.15 Cleaning the 3rd folding roller
24.3.16 Folding conveyance section
24.3.17 Main tray up/down wire
24.3.18 Multi feed detection board /1 (MFDB/1) and /2 (MFDB/2)
24.3.19 Note for replacing the board
25. SD-506
25.1 Items not allowed to be disassembled/reassembled
25.1.1 Trimmer blade home sensor (PS50), Trimmer blade upper limit sensor (PS51)
25.1.2 Trimmer completion sensor (PS62)
25.1.3 Wire slack prevention sensor (PS66)
25.1.4 Trimmer press upper limit sensor (PS52), Trimmer press home sensor (PS53)
25.1.5 Trimmer press brake
25.1.6 Fixing screw of the trimmer press timing belt
25.2 List of disassembling and assembling parts
25.3 Disassembling and assembling procedures
25.3.1 Precautions on disassembling and assembling
25.3.2 Rear cover/Lt
25.3.3 Rear cover/Rt
25.3.4 Left cover
25.3.5 Upper cover/Fr
25.3.6 Upper cover/Rr3
25.3.7 Sub tray cover
25.3.8 Front door/Lt
25.3.9 Front door/Rt
25.3.10 Folding unit
25.3.11 Note for replacing the board
26. SD-513
26.1 Items that you must not disassemble or reassemble
26.1.1 Red-painted screws
26.2 List of disassembling and assembling parts
26.3 Disassembling and assembling procedures
26.3.1 Precautions on disassembling and assembling
26.3.2 Rear cover/Rt, /Lt
26.3.3 Right cover/1, /2, /3
26.3.4 Front cover/1, /2, /3
26.3.5 Left cover/Fr1, left cover/Fr2, left cover/Fr3
26.3.6 Left cover/Rr
26.3.7 Upper cover/RrRt1, /RrRt2, /RrRt3, /RrRt4, /RrRt5, /RrRt6
26.3.8 Upper cover/FrRt1, /FrRt2, /FrRt3
26.3.9 Upper cover/FrLt1, /FrLt2
26.3.10 Upper cover/RrLt1, /RrLt2, /RrLt3, sub tray cover
26.3.11 Opening and closing of the front console
26.3.12 Front console
26.3.13 Gripper paper exit unit
26.3.14 Open and close of the booklet tray section door
26.3.15 Moving up and down of the booklet holding
26.3.16 Note for replacing the board
27. CR-101
27.1 Items not allowed to be disassembled/reassembled
27.1.1 Red-painted screws
27.2 List of disassembling and assembling parts
27.3 Disassembling and assembling procedures
27.3.1 Precautions on disassembling and assembling
27.3.2 Creaser unit
28. TU-503
28.1 Items not allowed to be disassembled/reassembled
28.1.1 Red-painted screws
28.2 List of disassembling and assembling parts
28.3 Disassembling and assembling procedures
28.3.1 Precautions on disassembling and assembling
28.3.2 Slitter unit
29. FD-504
29.1 Items that you must not disassemble or reassemble
29.1.1 Red-painted screws
29.2 List of disassembling and assembling parts
29.3 Disassembling and assembling procedures
29.3.1 Precautions on disassembling and assembling
29.3.2 Spine corner forming unit
29.3.3 Note for disassembling the FD-504 (1)
29.3.4 Note for disassembling the FD-504 (2)
30. PB-503
30.1 List of disassembling and assembling parts
30.2 Disassembling and assembling procedures
30.2.1 Precautions on disassembling and assembling
30.2.2 Front door
30.2.3 Front cover
30.2.4 Booklet door
30.2.5 Rear cover/Rt
30.2.6 Rear cover/Lt
30.2.7 Left cover
30.2.8 Relay conveyance gear cover/Fr
30.2.9 Relay conveyance gear cover/Rr
30.2.10 Pellet supply cover
30.2.11 SC cover/Fr
30.2.12 SC cover/Up
30.2.13 Upper cover/FrRt
30.2.14 Upper cover/FrLt
30.2.15 Upper cover/RrRt
30.2.16 Upper cover/RrLt
30.2.17 Upper cover/Md
30.2.18 Deodorant unit
30.2.19 Pellet supply unit
30.2.20 Glue tank unit
30.2.21 SC unit
30.2.22 Clamp unit
30.2.23 PB left unit
30.2.24 Book lift wire
30.2.25 Cart wire
30.2.26 Conveyance unit/Lw
30.2.27 Relay conveyance unit
30.2.28 Cover paper tray
30.2.29 Cover paper lift wire
30.2.30 Binding mode procedure with manual operating function
30.2.31 Multi feed detection boards/S (MFDBS) and /R (MFDBR)
31. GP-501
31.1 Centering punched holes
31.2 Door latch
31.2.1 Door latch check
31.2.2 Door Latch Adjustment
31.2.3 Door Latch and Switch Replacement
31.3 Preparing the GP-501 punch for service
31.3.1 Preparing the GP-501 punch for service
31.3.2 Separating the Punch From the Printer
31.3.3 Removing the Rear Cover
31.4 Leveling and aligning to the printer
(1) Procedure
(2) Tool Required
(3) To level the punch:
32. GP-502
33. COMMERCIALLY AVAILABLE PARTS
33.1 Key counter (KCT)
33.1.1 Connector
33.1.2 Procedure

H) CLEANING/LUBRICATION
1. CLEANING/LUBRICATION PROCEDURES

I) ADJUSTMENT/SETTING
1. CHECKPOINTS
1.1 Checking before you start work
1.2 Checkpoints when you conduct the on-site service
2. UTILITY
2.1 List of utility menus
2.1.1 Hierarchy
2.2 Start and exit
2.2.1 Start method
2.2.2 Exit method
3. LIST OF ADJUSTMENT ITEMS
3.1 Priority for Adjustment/Setting after replacing parts
4. SERVICE MODE
4.1 Service Mode List
4.1.1 Hierarchy
4.2 Start and exit
4.2.1 Start method
4.2.2 Exit method
4.3 Machine Adjustment
4.3.1 Restart Timing Adjustment (Printer Adjustment)
4.3.2 Centering Auto Adjustment (Printer Adjustment – Centering Adjustment)
4.3.3 Centering Sensor Gap Adj. (Printer Adjustment – Centering Adjustment)
4.3.4 Centering Adjustment (Printer Adjustment – Centering Adjustment)
4.3.5 FD-Mag. Adjustment (Printer Adjustment)
4.3.6 CD-Mag. Adjustment (Printer Adjustment)
4.3.7 Lead Edge Erase Adjustment (Printer Adjustment)
4.3.8 Registration Loop Adj. (Printer Adjustment)
4.3.9 Pre-registration Adj. (Printer Adjustment)
4.3.10 Belt Line Speed Adj. (Printer Adjustment)
4.3.11 Skew Initial Position Memory (Printer Adjustment – Writing Initial Pos. Memory)
4.3.12 Color Registration Auto.Adj. (Printer Adjustment)
4.3.13 Color Regist. Gap Masurement (Printer Adjustment)
4.3.14 Double Feed Detect Adj. (Printer Adjustment)
4.3.15 Crosswise Dir. Skew Adj. (Printer Adjustment)
4.3.16 Beam Pitch Adjustment (Printer Adjustment)
4.3.17 Color Regist. Manual Adj. (Printer Adjustment)
4.3.18 LCT Banner Regist. Speed Adj. (Printer Adjustment)
4.3.19 Recall Standard Data (Printer Adjustment)
4.3.20 Restart Timing Adjustment (Scan Adjustment)
4.3.21 Centering Adjustment (Scan Adjustment)
4.3.22 FD-Mag. Adjustment (Scan Adjustment)
4.3.23 Scan Gradation/Color Adj. (Scan Adjustment)
4.3.24 CD-Mag. Adjustment (Scan Adjustment)
4.3.25 Sensor Check (Scan Adjustment)
4.3.26 CCD Check (Scan Adjustment)
4.3.27 Line Mag. Setting (Scan Adjustment)
4.3.28 Recall Standard Data (Scan Adjustment)
4.3.29 IDC Sensor Adjustment (Quality Adjustment – Gamma Curve Adjustment)
4.3.30 IDC Sensor Adjustment (RU) (Quality Adjustment – Gamma Curve Adjustment)
4.3.31 Highlight Automatic Adj. (Quality Adjustment – Gamma Curve Adjustment)
4.3.32 Highlight Automatic Adj. (RU) (Quality Adjustment – Gamma Curve Adjustment)
4.3.33 Highlight Adjustment (Quality Adjustment – Gamma Curve Adjustment)
4.3.34 Half-Tone Adjustment (Quality Adjustment – Gamma Curve Adjustment)
4.3.35 Sharpness Adjustment (Quality Adjustment)
4.3.36 Contrast Adjustment (Quality Adjustment)
4.3.37 Dot Detect Adjustment (Quality Adjustment – Image Distinction Level)
4.3.38 Color Text Adjustment (Quality Adjustment – Image Distinction Level)
4.3.39 Dot/Text Area Adjustment (Quality Adjustment – Image Distinction Level)
4.3.40 ACS Adjustment (Quality Adjustment)
4.3.41 AE(AES) Adjustment (Quality Adjustment – Density Adjustment)
4.3.42 Copy Density Adjustment (Quality Adjustment – Density Adjustment)
4.3.43 Background Removal (Quality Adjustment – Density Adjustment)
4.3.44 Tone Adjustment (RGB/YMC) (Quality Adjustment – Tone Adjustment)
4.3.45 Recall Standard Data (Quality Adjustment)
4.3.46 Non-Image Area Erase Check
4.3.47 Laser Pulse Adjustment
4.3.48 Tray Size Adjustment (Tray Adjustment)
4.4 Process Adjustment
4.4.1 1st Transfer Manual Adj. (High Voltage Adjustment)
4.4.2 2nd Transfer Manual Adj. (High Voltage Adjustment)
4.4.3 Sep. Current Manual Adj. (High Voltage Adjustment)
4.4.4 Pre-transfer Guide Confirm (High Voltage Adjustment)
4.4.5 Blade Setting Mode (Drum Peculiarity Adj.)
4.4.6 Gamma Automatic Adjustment (Drum Peculiarity Adj.)
4.4.7 Toner Density Sensor Init. (Drum Peculiarity Adj.)
4.4.8 Toner Density Revert (Drum Peculiarity Adj.)
4.4.9 Max Density Initial Adj. (Drum Peculiarity Adj.)
4.4.10 All Dev. Unit Replace Adj. (Drum Peculiarity Adj.)
4.4.11 IDC Sensor Output (Sensor Output Confirm)
4.4.12 Toner Density Sensor Output (Sensor Output Confirm)
4.4.13 Humidity/Temperature Output (Sensor Output Confirm)
4.4.14 1st Trans. Resistance Meas. (Sensor Output Confirm)
4.4.15 2nd Trans. Resistance Meas. (Sensor Output Confirm)
4.4.16 Background Margin Fine Adj. (Process Fine Adjustment)
4.4.17 Develop AC Bias Fine Adj. (Process Fine Adjustment)
4.4.18 Develop AC Frequency (Process Fine Adjustment)
4.4.19 Toner Density Fine Adj. (Process Fine Adjustment)
4.4.20 Fusing Temperature Fine Adj. (Process Fine Adjustment)
4.4.21 Drum Small Rotation Interval (Interval/Quantity Adj.)
4.4.22 Recall Standard Data
4.5 System setting
4.5.1 Software DIPSW setting procedures
4.5.2 Service Center TEL/FAX
4.5.3 Serial Number Setting
4.5.4 Setup date/type of business setting
4.5.5 Toner band creation condition (productivity priority setting)
4.5.6 Restrictions on banner print
4.5.7 Setting of the toner amount and the replacement count of the toner bottle
4.5.8 Troubleshooting for image errors
4.5.9 Remaining staple amount display setting
4.5.10 Postcard full bleed print setting
4.6 DIPSW 1 to 100
4.6.1 Software DIPSW setting list (1 to 100)
4.7 DIPSW 101 to 200
4.7.1 Software DIPSW setting list (101 to 200)
4.8 DIPSW 201 to 250
4.8.1 Software DIPSW setting list (201 to 250)
4.9 DIPSW 251 to 300
4.9.1 Software DIPSW setting list (251 to 300)
4.10 Counter and data
4.10.1 Maintenance Counter
4.10.2 Data collection procedures
4.10.3 Paper Size Counter (Total/copy/print)
4.10.4 ADF Counter
4.10.5 Coverage Data History
4.10.6 Paper JAM History
4.10.7 JAM/JAM Counter Individual Sec
4.10.8 Counter of Each Copy Mode
4.10.9 SC Counter/SC Counter Individual Sec
4.10.10 SC data of time series
4.10.11 Maintenance Counter Reset (Maintenance History)
4.10.12 Parts History in Time Series (Maintenance History)
4.10.13 Counter of each paper type
4.10.14 ORU-M Maintenance History
4.10.15 Check, setting and reset procedure of the Special Parts Counter
4.10.16 Special Parts Counter
4.10.17 Voluntary Part Counter (Parts Counter)
4.10.18 Total Counter History
4.10.19 Life Counter
4.11 State confirmation
4.11.1 I/O Check Mode
4.11.2 Input check procedures
4.11.3 Output check procedures
4.11.4 IO check mode list
4.11.5 Adjustment when you replace the multi feed detection board (PI)
4.11.6 Adjustment when you replace the cover paper multi feed detection board (PB)
4.11.7 FD-503, SD-506, SD-513, FS-531/612 and PB-503 adjustment data EEPROM storage
4.11.8 Main body adjustment data NVRAM board storage
4.11.9 Printer image processing board line memory check
4.11.10 Hard disk check
4.11.11 Hard disk replacing procedure
4.11.12 Replacing procedure of the write unit
4.11.13 Procedure when IO35-21 or IO35-25 is used
4.12 ADF adjustment
4.12.1 ADF Original Size Adj
4.12.2 ADF Orig. Stop Position
4.12.3 ADF Orig Stop Pos. Auto
4.12.4 ADF Registration Loop Adj
4.12.5 Feed paper check
4.12.6 Sensor check
4.12.7 Read Position Adj
4.12.8 Read Position Auto Adj
4.12.9 FD-Mag. Adjustment
4.12.10 FD-Mag. Auto Adjustment
4.12.11 Scanning Light Adjustment
4.12.12 Mixed Original Size Adj
4.12.13 Line Detection(Front Side)
4.12.14 Line Detection(Back Side)
4.12.15 ADF Scan Glass Auto Cleaning
4.12.16 Home Read Position Adj(Back)
4.12.17 FD-Mag. Adjustment(Back)
4.12.18 FD-Mag. Auto Adj.(Back)
4.12.19 Main Scan Dir. Zoom(Back)
4.12.20 Main Scan Dir. Zoom Auto(Back)
4.12.21 Original Tray Pre-rise Set
4.12.22 Multi-Feed Detection Adj
4.12.23 Recall Standard Data
4.12.24 ADF Data Backup
4.13 Finisher adjustment
4.13.1 OT-510 Exit guide unit paper width adjustment (staple finisher (main) adjustment)
4.13.2 FS-532 Exit guide unit paper width adjustment (staple finisher (main) adjustment)
4.13.3 FS-532 Staple paper width adjustment (staple finisher (main) adjustment)
4.13.4 FS-532 FD alignment plate adjustment (staple finisher (main) adjustment)
4.13.5 FS-532 Staple Position Adjustment (staple finisher (main) adjustment)
4.13.6 FS-532 Rewind paddle descent adjustment (staple finisher (main) adjustment)
4.13.7 SD-510 Fold&staple paper width adjustment (staple finisher (fold) adjustment)
4.13.8 SD-510 Fold&staple pitch adjustment (staple finisher (fold) adjustment)
4.13.9 SD-510 Fold&staple fold position adjustment (staple finisher (fold) adjustment)
4.13.10 SD-510 Fold&staple staple position adjustment (staple finisher (fold) adjustment)
4.13.11 SD-510 Half-fold fold position adjustment (staple finisher (fold) adjustment)
4.13.12 SD-510 Tri-fold position adjustment (staple finisher (fold) adjustment)
4.13.13 SD-510 Double fold plate adjustment (staple finisher (fold) adjustment)
4.13.14 SD-510 Half-fold strength adjustment (staple finisher (fold) adjustment)
4.13.15 PK-522 Paper edge sensor adjustment (staple finisher (punch) adjustment)
4.13.16 PK-522 Registration adjustment (staple finisher (punch) adjustment)
4.13.17 PK-522 Horizontal position adjustment (paper feed direction) (staple finisher (punch) adjustment)
4.13.18 PK-522 Vertical position adjustment (crosswise direction) (staple finisher (punch) adjustment)
4.13.19 PI-502 Tray size adjustment (staple finisher (PI) adjustment)
4.13.20 PI-502 PI registration adjustment (staple finisher (PI) adjustment)
4.13.21 FD-503 Paper width adjustment (multi folder (punch) adjustment)
4.13.22 FD-503 Punch vertical position adjustment (multi folder (punch) adjustment)
4.13.23 FD-503 Fold registration loop adjustment (multi folder (fold) adjustment)
4.13.24 FD-503 Half fold position adjustment (multi folder (fold) adjustment)
4.13.25 FD-503 Z-fold position adjustment (multi folder (fold) adjustment)
4.13.26 FD-503 Tri-fold-in position adjustment (multi folder (fold) adjustment)
4.13.27 FD-503 Tri-fold-out position adjustment (multi folder (fold) adjustment)
4.13.28 FD-503 Double parallel position adjustment (multi folder (fold) adjustment)
4.13.29 FD-503 Gate position adjustment (multi folder (fold) adjustment)
4.13.30 LS-506 Paper width adjustment (stacker adjustment)
4.13.31 LS-506 Paper length adjustment (stacker adjustment)
4.13.32 SD-506 Fold paper width adjustment (saddle stitcher adjustment)
4.13.33 SD-506 Half-fold position adjustment (saddle stitcher adjustment)
4.13.34 SD-506 Staple paper width adjustment (saddle stitcher adjustment)
4.13.35 SD-506 Staple center position adjustment (saddle stitcher adjustment)
4.13.36 SD-506 Staple pitch adjustment (saddle stitcher adjustment)
4.13.37 SD-506 Trimming adjustment (saddle stitcher adjustment)
4.13.38 SD-506 Tri-fold position adjustment (saddle stitcher adjustment)
4.13.39 SD-506 Trimmer receiver adjustment (saddle stitcher adjustment)
4.13.40 SD-513 Trans. Entrance Paper Width (Saddle Stitcher Adjustment)
4.13.41 SD-513 Fold Paper Width Adjustment (Saddle Stitcher Adjustment)
4.13.42 SD-513 Fold Skew Adjustment (Saddle Stitcher Adjustment)
4.13.43 SD-513 Half-Fold Position Adjustment (Saddle Stitcher Adjustment)
4.13.44 SD-513 Tri-Fold Position Adjustment (Saddle Stitcher Adjustment)
4.13.45 CR-101 Crease Position Adjustment – Half-Fold Crease Position (Saddle Stitcher Adjustment)
4.13.46 CR-101 Crease Position Adjustment – Tri-Fold Crease Position (Saddle Stitcher Adjustment)
4.13.47 CR-101 Crease Position Adjustment – PB Cover Crease Position (Saddle Stitcher Adjustment)
4.13.48 SD-513 Staple Paper Width Adjustment (Saddle Stitcher Adjustment)
4.13.49 SD-513 Staple Center Adjustment (Saddle Stitcher Adjustment)
4.13.50 SD-513 Staple Pitch Adjustment (Saddle Stitcher Adjustment)
4.13.51 SD-513 Saddle Position Adjustment (Saddle Stitcher Adjustment)
4.13.52 SD-513 Staple Offset Adjustment (Saddle Stitcher Adjustment)
4.13.53 SD-513 Staple Tip Adjustment (Saddle Stitcher Adjustment)
4.13.54 FD-504 Spine Fold Line Adjustment (Saddle Stitcher Adjustment)
4.13.55 FD-504 Flattening a Fold (Strength) (Saddle Stitcher Adjustment)
4.13.56 FD-504 Flattening a Fold (Frequency) (Saddle Stitcher Adjustment)
4.13.57 SD-513/FD-504 Parallel Trimming Adjustment (Saddle Stitcher Adjustment)
4.13.58 SD-513 Fore-edge Trimming Adjustment (Saddle Stitcher Adjustment)
4.13.59 TU-503 Registration Loop Adjustment (Saddle Stitcher Adjustment)
4.13.60 TU-503 2-Side Slitting Adjustment (Saddle Stitcher Adjustment)
4.13.61 SD-513 Trimmer Receiver Adjustment (Saddle Stitcher Adjustment)
4.13.62 PB-503 Sub compile CD width adjustment (perfect binder adjustment)
4.13.63 PB-503 Clamp CD width adjustment (perfect binder adjustment)
4.13.64 PB-503 Clamp FD position adjustment (perfect binder adjustment)
4.13.65 PB-503 Glue start position adjustment (perfect binder adjustment)
4.13.66 PB-503 Glue finish position adjustment (perfect binder adjustment)
4.13.67 PB-503 Cover lead edge adjustment (perfect binder adjustment)
4.13.68 PB-503 Cover trimming adjustment (perfect binder adjustment)
4.13.69 PB-503 Cover up down CD width adjustment (perfect binder adjustment)
4.13.70 PB-503 Spine corner form position adjustment (perfect binder adjustment)
4.13.71 PB-503 Temperature adjustment (perfect binder adjustment)
4.13.72 RU-510 Paper Width Adjustment (Relay Stacker Adjustment)
4.13.73 RU-510 Paper Length Adjustment (Relay Stacker Adjustment)
4.13.74 FS-531/612 Confirm Paper Feed Position
4.13.75 FS-612 Fold & Staple Stopper Adjustment
4.13.76 FS-612 Half-Fold stopper adjustment
4.13.77 PK-512/513 Vertical Position Adj. (Punch Adjustment)
4.13.78 PK-512/513 Horizontal Position Adj. (Punch Adjustment)
4.13.79 PK-512/513 Registration Adjustment (Punch Adjustment)
4.13.80 PK-512/513 Paper Edge Detect Sensor (Punch Adjustment)
4.13.81 FS-612 Tri-Fold Adjustment
4.13.82 FS-612 2 Position Staple Pitch
4.13.83 PI-502 Post Inserter Tray Size
4.13.84 FS-531/612 Output Quantity Limit
4.13.85 Recall Standard Data
4.14 Firmware Version
(1) Usage
(2) Procedure
4.15 CS Remote Care
4.15.1 Outline
4.15.2 Setup procedure of the CS Remote Care (When using E-mail)
4.15.3 Setup procedure of the CS Remote Care (When using phone line modem)
4.15.4 Setup procedure of the CS Remote Care (When using WebDAV server)
4.15.5 List of combinations of E-mail CS Remote Care and Mail remote notification system
4.15.6 Mail initial setting
4.15.7 http communication setting
4.15.8 Log forwarding function
4.15.9 Input procedure of software DIPSW for CS Remote Care
4.15.10 List of software DIPSW for CS Remote Care
4.15.11 Setup confirmation
4.15.12 Maintenance call
4.15.13 Center call from administrator
4.15.14 Confirm communication log
4.15.15 Initialization of RAM for CS Remote Care
4.15.16 CS Remote Care error code list
4.15.17 TROUBLESHOOTING
4.16 List Output
(1) Usage
(2) Procedure
4.17 Test Mode
4.17.1 Running Test Mode
4.17.2 Test Pattern Output Mode
4.17.3 Test pattern number 11 Beam check
4.17.4 Test pattern number 16 Linearity evaluation pattern
4.17.5 Test pattern number 25 registration mark position check pattern
4.17.6 Test pattern number 33 Linearity evaluation pattern
4.17.7 Test pattern number 40 Image skew check pattern (full-bleed print of test pattern number 16)
4.17.8 Test pattern number 43 Output 12 test patterns at a time
4.17.9 Test pattern number 49 RU color sensor gamma correction (output paper density adjustment chart i1-iSis/i1-Pro).I-427
4.17.10 Test pattern number 51 Gradation evaluation pattern (main scan)
4.17.11 Test pattern number 52 Gradation evaluation pattern (sub scan)
4.17.12 Test pattern number 53 Overall halftone
4.17.13 Test pattern number 54 Gradation evaluation pattern
4.17.14 Test pattern number 55 5% coverage
4.17.15 Test pattern number 58 Stripe check pattern
4.17.16 Test pattern number 62 Uneven density check pattern
4.17.17 Test pattern number 69 Maximum density adjustment pattern
4.17.18 Test pattern number 75 Density correction pattern i1-iSis XL (Type1/Type2)
4.17.19 Test pattern number 76 Density correction pattern i1-Pro (Type1/Type2)
4.17.20 Test pattern number 77 Density correction pattern manual
4.17.21 Test pattern number 80 Print peculiarity evaluation pattern
4.17.22 Test pattern number 200 Chart file output
4.18 Setting Data
4.18.1 Load from External Memory
4.18.2 Store to External Memory
4.19 Log Store
4.19.1 Log Store Setting
4.19.2 Execute Log Storing
4.19.3 Download of the log from Web Utilities
4.19.4 Acquire the logs for the controller via WebDAV
4.20 ORU-M Setting
4.20.1 ORU-M Item/Life setting
4.20.2 ORU-M Life Threshold Setting
4.20.3 ORU-M Password Setting
4.21 HDD Setting
4.21.1 Format HDD All Data
4.21.2 Format Controller HDD Data
4.21.3 Format Additional HDD Data
4.22 Auth. Device Setting
4.22.1 Auth. Unit Selection
4.22.2 Loadable Driver Install
4.23 Startup Setting
4.23.1 Package Adjustment
4.23.2 Setup Setting 1
4.23.3 Setup Setting 2
5. IC-603 SERVICE MODE
5.1 IC Service Mode List
5.2 Start and exit of IC service mode
5.2.1 Method to activate the IC service mode
5.2.2 Method to exit the IC service mode
5.3 System Setting (Toner Supply)
5.3.1 Outline
5.3.2 Procedure
5.4 CSV File Import/Export
5.4.1 Outline
5.4.2 Procedure
5.5 Font Backup
5.5.1 Outline
5.5.2 Preparation of backup/restore
5.5.3 Backup method
5.5.4 Method to restore
5.6 HP Tray Mapping
5.6.1 Outline
5.6.2 Procedure
5.7 Controller Capture Setting
(1) OUTLINE
(2) Acquisition procedure
6. CE/ADMINISTRATOR SECURITY SETTING
6.1 CE/Administrator Security Setting list
6.2 Start/exit
(1) Usage
(2) Procedure
6.3 CE Authentication
(1) Usage
(2) Procedure
6.4 CE Auth. Password
(1) Usage
(2) Procedure
6.5 Admin. Authentication
(1) Usage
(2) Procedure
6.6 Administrator Password
(1) Usage
(2) Procedure
7. FEE COLLECTION SETTING
7.1 Fee Collection Setting List
7.2 Start/exit
(1) Usage
(2) Procedure
7.3 Fee Collection Setting
7.3.1 Threshold Setting
7.3.2 Billing Counter
7.3.3 Coefficient Setting
7.4 General Setting
(1) Usage
(2) Procedure
7.5 Manage OpenAPI Auth
7.5.1 Restriction Code
7.6 Billing Coefficient Setting
(1) Usage
(2) Function
(3) Procedure
8. ADJUSTMENT FOR POD
8.1 Expert Adjustment
8.1.1 Outline
8.1.2 Preset
8.1.3 2nd Transfer Output Adj. (Front), (Back)
8.1.4 2nd Transfer-Lead Edge(Front), (Back)
8.1.5 2nd Transfer-Rear Edge(Front), (Back)
8.1.6 Separation AC(Front), (Back)
8.1.7 Separation DC(Front), (Back)
8.1.8 Upper Fusing Roller Temperature
8.1.9 Lead Edge Erase Quantity
8.1.10 Temp. Gap of Fus. edge and Mid
8.1.11 Lower Fusing Roller Temperature
8.1.12 Rear Edge Erase Quantity
8.1.13 Back on Top Output Timing Adj
8.1.14 ADU Reverse Timing
8.1.15 Fusing Speed(Front Side)
8.1.16 Fusing Speed(Back Side Offset)
8.1.17 Registration Loop(Front), (Back)
8.1.18 Up Fusing Initial Temp
8.1.19 2nd Trans. Pressure
8.1.20 CPM Down
8.1.21 Toner Amount Save
8.1.22 Dens. Adj. Per Tray (YMC)
8.1.23 Dens. Adj. Per Tray (K)
8.1.24 Mis-centering Detect JAM
8.1.25 Double Feed Detection
8.1.26 Int. Transfer Separation
8.1.27 Thick BK mode
8.1.28 Feed Correction Level
8.1.29 Output Curl Adjustment
8.1.30 Output Curl (Back on Top)
8.1.31 Centering Adj. (Front), (Back)
8.1.32 Fusing Air Separation Air Level Setting
8.1.33 Change Fusing Pressure
8.1.34 Hard Paper Mode
8.1.35 PFU Suction Air Level Setting
8.1.36 Output Paper Separation Setting
8.1.37 Output Cooling Air Level Adj
8.2 Image quality/improving paper feeding adjustment
8.2.1 Transfer jitter adjustment
9. MECHANICAL ADJUSTMENT AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L
9.1 Adjustment of the scanner motor belt
9.1.1 Purpose
9.1.2 Procedure
9.2 Centering adjustment of the paper feed tray/1 and the paper feed tray/2
(1) Usage
(2) Procedure
9.3 Separation pressure adjustment of the paper feed tray/1 and the paper feed tray/2
(1) Usage
(2) Procedure
9.4 Writing unit tilt adjustment
9.4.1 Whole adjustment flow of color gap
9.4.2 Function
9.4.3 Usage
9.4.4 Procedure
9.5 Separation discharging plate assy position adjustment
(1) Usage
(2) Procedure
9.6 Registration unit skew adjustment
(1) Usage
(2) Procedure
9.7 Fusing unit skew adjustment
(1) Usage
(2) Procedure
9.8 Fusing paper exit rollerr pressure adjustment
(1) Usage
(2) Procedure
9.9 Tilt adjustment
9.9.1 Usage
9.9.2 Procedure
10. MECHANICAL ADJUSTMENT DF-706
10.1 Adjusting the height
10.1.1 Purpose
10.1.2 Procedure
10.2 Adjusting front side skew feed on dual scan document feeder
10.2.1 Purpose
10.2.2 Procedure
10.3 Adjusting back side skew feed on dual scan document feeder
10.3.1 Purpose
10.3.2 Procedure
10.4 Adjusting the pressure of the separation roller
10.4.1 Purpose
10.4.2 Procedure
10.5 Adjusting multi-feed detection
11. MECHANICAL ADJUSTMENT PF-602m
11.1 Paper feed pick-up amount adjustment
(1) Usage
(2) Procedure
11.2 Pick-up roller height adjustment
(1) Usage
(2) Procedure
11.3 Separation pressure adjustment
(1) Usage
(2) Procedure
11.4 Lift plate horizontal adjustment
(1) Usage
(2) Procedure
11.5 Horizontal adjustment
(1) Usage
(2) Procedure
12. MECHANICAL ADJUSTMENT PF-707
12.1 Paper feed pressure adjustment
(1) Usage
(2) Preparation
(3) Multi-feed adjustment (J-1610)
(4) No feed adjustment (J-1601 to J-1603)
(5) Paper lead edge buckle adjustment
(6) Feed failed jam adjustment (J-1601, J-1602, J-1613)
12.2 Centering adjustment (for each tray)
(1) Usage
(2) Procedure
12.3 Centering Adjustment (PF)
(1) Usage
(2) Procedure
12.4 Height and tilt adjustment
12.4.1 Usage
12.4.2 Procedure
12.5 Tilt adjustment
(1) Usage
(2) Procedure
13. MECHANICAL ADJUSTMENT LU-202m/LU-202XL
13.1 Separation pressure adjustment
(1) Usage
(2) Procedure
13.2 Paper lift plate horizontal adjustment
(1) Usage
(2) Procedure
13.3 Paper centering adjustment
(1) Usage
(2) Procedure
13.4 Paper skew adjustment
(1) Usage
(2) Preparation
(3) Adjustment procedure of all the paper skew regularly(For LU-202m)
(4) Adjustment procedure for all paper in LU skew regularly (for LU-202XL)
(5) Adjustment procedure of each paper skew irregularly
13.5 (Maximum) Paper feed height adjustment
(1) Usage
(2) Procedure
13.6 Pick-up roller separation adjustment
(1) Usage
(2) Procedure
13.7 Weight adjustment
(1) Usage
(2) Procedure
13.8 Height adjustment of LU
(1) Usage
(2) Procedure (LU-202m)
(3) Procedure (LU-202XL)
14. MECHANICAL ADJUSTMENT MB-506
14.1 Pick-up roller/BP load adjustment
14.1.1 Usage
14.1.2 Procedure
14.2 Paper feed (Maximum) height adjustment (bypass)
14.2.1 Usage
14.2.2 Procedure
14.3 Pick-up shift amount adjustment (bypass)
14.3.1 Usage
14.3.2 Procedure
14.4 Separation roller/BP separation pressure adjustment
14.4.1 Usage
14.4.2 Procedure
15. MECHANICAL ADJUSTMENT MK-740
15.1 Tray install position adjustment
15.1.1 Usage
15.1.2 Procedure
16. MECHANICAL ADJUSTMENT EF-103
16.1 Fusing unit skew adjustment
16.2 Fusing paper exit roller pressure adjustment
17. MECHANICAL ADJUSTMENT OT-511
17.1 Conveyance door position adjustment
17.1.1 Usage
17.1.2 Adjustment procedure of the new type
18. MECHANICAL ADJUSTMENT OT-510
18.1 Main tray horizontal adjustment
18.1.1 Purpose
18.1.2 Procedure
19. MECHANICAL ADJUSTMENT RU-509
19.1 Height adjustment
(1) Usage
(2) Procedure
19.2 Position adjustment of the shutter solenoid (SD5)
(1) Usage
(2) Procedure
19.3 Image scratch reduction
(1) Function
(2) Usage
(3) Procedure
20. MECHANICAL ADJUSTMENT RU-510
20.1 Height adjustment
(1) Usage
(2) Procedure
21. MECHANICAL ADJUSTMENT FS-531
21.1 Adjustment the bypass gate
(1) Usage
(2) Procedure
21.2 Adjusting the shift position
(1) Usage
(2) Procedure
21.3 Adjusting the paper exit opening solenoid
(1) Usage
(2) Procedure
21.4 Adjusting the mounting position of the paper exit arm
(1) Usage
(2) Procedure
21.5 Adjusting the mounting position of the alignment plate/Up
(1) Usage
(2) Procedure
21.6 Staple position adjustment
(1) Usage
(2) Procedure
22. MECHANICAL ADJUSTMENT FS-612
22.1 Adjustment the bypass gate
(1) Usage
(2) Procedure
22.2 Adjusting the shift position
(1) Usage
(2) Procedure
22.3 Adjusting the paper exit opening solenoid
(1) Usage
(2) Procedure
22.4 Adjusting the mounting position of the paper exit arm
(1) Usage
(2) Procedure
22.5 Adjusting the mounting position of the alignment plate/Up
(1) Usage
(2) Procedure
22.6 Adjusting the mounting position of the alignment plate/Lw
(1) Usage
(2) Procedure
22.7 Staple position adjustment
(1) Usage
(2) Procedure
22.8 Staple position adjustment (Saddle stitching)
(1) Usage
(2) Procedure
22.9 Staple up/down position adjustment
(1) Usage
(2) Procedure
22.10 Half-fold stopper tilt adjustment
(1) Usage
(2) Procedure
22.11 Folding pressure adjustment
(1) Usage
(2) Procedure
22.12 Tri-folding position adjustment
(1) Usage
(2) Procedure
23. MECHANICAL ADJUSTMENT PK-512/513
23.1 Punch hole position skew adjustment
(1) Usage
(2) Procedure
24. MECHANICAL ADJUSTMENT PI-502
24.1 PI tilt adjustment (When PK is connected)
(1) Usage
(2) Procedure
24.2 PK punch position centering adjustment
24.2.1 Usage
24.2.2 Adjustment procedure for the cover sheet tray/Up
24.2.3 Adjustment procedure for the cover sheet tray/Lw
25. MECHANICAL ADJUSTMENT FS-532
25.1 Staple position adjustment
25.1.1 Usage
25.1.2 Procedure
25.2 Main tray horizontal adjustment
25.2.1 Purpose
25.2.2 Procedure
26. MECHANICAL ADJUSTMENT SD-510
26.1 Adjustment for Staple Clinch Failure
26.1.1 Usage
26.1.2 Procedure
26.2 1st folding skew adjustment
26.2.1 Usage
26.2.2 Procedure
27. MECHANICAL ADJUSTMENT PK-522
27.1 Punch hole position skew adjustment
27.1.1 Usage
27.1.2 Procedure
27.2 Punch unit adjustment mounting position adjustment
27.2.1 Usage
27.2.2 Procedure
28. MECHANICAL ADJUSTMENT LS-506
28.1 Adjusting the paper press solenoid/1 (SD6)
(1) Usage
(2) Procedure
28.2 Adjusting the paper press solenoid/2 (SD7)
(1) Usage
(2) Procedure
28.3 Adjusting the paper press solenoid/3 (SD8)
(1) Usage
(2) Procedure
28.4 Adjusting the job partition solenoid (SD2)
(1) Usage
(2) Procedure
28.5 Horizontal adjustment
(1) Usage
(2) Procedure
28.6 Grip conveyance home sensor adjustment
(1) Usage
(2) Procedure
28.7 Stacker tray height adjustment (LS-506)
28.7.1 Purpose
28.7.2 Procedure
28.8 Stacker tray levelness adjustment (LS-506)
28.8.1 Purpose
28.8.2 Procedure
29. MECHANICAL ADJUSTMENT FD-503
29.1 Roller solenoids/1 (SD5), /2 (SD6), /3 (SD7) and /4 (SD8) position adjustment
(1) Usage
(2) Procedure
29.2 2nd folding roller solenoid (SD18) position adjustment
(1) Usage
(2) Procedure
29.3 Punch centering adjustment
(1) Usage
(2) Procedure
29.4 Horizontal adjustment
(1) Usage
(2) Procedure
29.5 Paper feed control gear position adjustment (PI tray)
(1) Usage
(2) Procedure
29.6 Paper feed pick-up volume adjustment (PI tray)
(1) Usage
(2) Procedure
30. MECHANICAL ADJUSTMENT SD-506
30.1 Horizontal adjustment
(1) Usage
(2) Procedure
30.2 Folding skew adjustment
(1) Usage
(2) Procedure
30.3 Second folding position stabilization adjustment
(1) Usage
(2) Procedure
30.4 Staple position adjustment
(1) Usage
(2) Procedure
(3) Adjustment Procedure/1
(4) Adjustment Procedure/2
30.5 Stapler position adjustment
(1) Usage
(2) Procedure
30.6 Tilt/gap adjustment of the clincher
(1) Usage
(2) Procedure
30.7 Trimming skew adjustment
(1) Usage
(2) Procedure
30.8 Trimming adjustment
(1) Usage
(2) Procedure
31. MECHANICAL ADJUSTMENT SD-513
31.1 Front stopper position adjustment
31.1.1 Usage
31.1.2 Procedure
31.2 1st folding skew adjustment
31.2.1 Usage
31.2.2 Procedure
31.3 Horizontal adjustment
31.3.1 Usage
31.3.2 Procedure
31.4 Front console open close caster height adjustment
31.4.1 Usage
31.4.2 Procedure
31.5 Staple adjustment
31.5.1 Usage
31.5.2 Procedure
31.6 Clincher position adjustment
31.6.1 Usage
31.6.2 Procedure
31.7 Saddle stitching alignment plate/Md position adjustment
31.7.1 Usage
31.7.2 Prior check
31.7.3 Procedure
31.8 Trimmer skew adjustment
31.8.1 Usage
31.8.2 Procedure
32. MECHANICAL ADJUSTMENT CR-101
32.1 Creaser unit skew adjustment
32.1.1 Usage
32.1.2 Procedure
33. MECHANICAL ADJUSTMENT TU-503
33.1 Slitter unit skew adjustment
33.1.1 Usage
33.1.2 Procedure
34. MECHANICAL ADJUSTMENT PB-503
34.1 Clamp sub scan direction alignment adjustment
(1) Usage
(2) Procedure
34.2 Clamp main scan direction alignment adjustment
(1) Usage
(2) Procedure
34.3 Pellet supply arm angle adjustment
(1) Usage
(2) Procedure
34.4 Glue apply roller gap adjustment
(1) Usage
(2) Procedure
34.5 Cover paper glue gap adjustment
(1) Usage
(2) Gap adjustment procedure in thin coat mode
(3) Gap adjustment procedure in thick coat mode
34.6 Glue tank movement rail tilt adjustment
(1) Usage
(2) Procedure
34.7 Cover paper folding plate nipping adjustment
(1) Usage
(2) Procedure
34.8 Cover paper folding plate parallel adjustment
(1) Usage
(2) Procedure
34.9 Cover paper table up down belt adjustment
(1) Usage
(2) Check point
(3) Procedure
34.10 Cover paper alignment plate adjustment
(1) Usage
(2) Procedure
34.11 Cover paper cutting skew adjustment
(1) Usage
(2) Procedure
34.12 Cover paper table positioning
(1) Usage
(2) Procedure
34.13 Cover paper tray pick-up adjustment
(1) Usage
(2) Procedure
34.14 Cover paper tray pick-up roller height adjustment
(1) Usage
(2) Procedure
34.15 Cover paper tray separation pressure adjustment
(1) Usage
(2) Procedure
34.16 Cover paper tray Centering Adjustment
(1) Usage
(2) Procedure
34.17 Cover paper tray lift plate horizontal adjustment
(1) Usage
(2) Procedure
34.18 Height adjustment
(1) Usage
(2) Procedure

J) REWRITING OF FIRMWARE
1. OUTLINE
1.1 Type
1.1.1 USB MEMORY ISW
1.1.2 Internet ISW
1.2 Board to be rewritten and firmware
1.3 Firmware data flow
1.4 Precautions on rewriting the firmware
1.4.1 ISW execution procedures
1.4.2 DIPSW on the board
1.4.3 Connect short connector when the firmware is rewrote
1.5 Error list
1.5.1 Main body error list
1.5.2 Troubleshooting procedure for the main body error
1.5.3 Operation when firmware abnormality occurs
2. ISWTRNS_G
2.1 Specifications
2.1.1 ISWTrns_G (PC software)
2.2 Installation of the ISWTrns_G
(1) Procedure
2.3 Usage of the ISWTrns_G
2.3.1 Firmware checksum check
2.4 Error list
(1) ISWTrns_G error list
(2) ISWTrns_G troubleshooting
3. USB MEMORY ISW
3.1 Usage of the USB memory ISW
3.1.1 Procedure
3.1.2 Main body error list
3.2 ISW procedure for ADF and the scanner
3.2.1 Preparation
3.2.2 Procedure for moving to the ISW rewriting screen
3.2.3 Procedure for rewriting the firmware
3.2.4 Main body error list
3.3 ISW Procedure of GP-502
3.3.1 Preparation
3.3.2 Procedure of rewriting M1
3.3.3 Procedure of rewriting M2
3.3.4 Procedure of rewriting M3
4. INTERNET ISW
4.1 Outline
4.2 Operating environment
4.3 Usage precautions
4.3.1 Notice to administrator
4.3.2 Power cut during writing
4.4 Initial setting
(1) Setting from the operation panel
(2) Setting from the Web browser
4.5 Internet ISW using the Web Utilities
4.5.1 Procedure
4.6 Internet ISW using the operation panel
4.6.1 Procedure
4.6.2 Main body error list
4.7 Authentication of the proxy server in Internet ISW
(1) Proxy server
(2) Authentication of the proxy server
(3) Authentication type of the proxy server and the command list
(4) Remark

K) TROUBLESHOOTING
1. JAM INDICATION
1.1 Jam code list
2. MALFUNCTION CODE
2.1 Trouble reset method
2.2 Function to detach defective sections
(1) User operation
(2) DIPSW setting
2.3 Malfunction code list
2.4 Malfunction code due to the connector disconnection
2.4.1 AccurioPress C2070/C2070P/C2060/Print C2060L
2.4.2 PF-707
2.4.3 LU-202XL
2.5 Solution 1 (C-0001_0300)
2.5.1 C-0001
2.5.2 C-0002
2.5.3 C-0101
2.5.4 C-0102
2.5.5 C-0103
2.5.6 C-0104
2.5.7 C-0113
2.5.8 C-0114
2.5.9 C-0115
2.5.10 C-0116
2.5.11 C-0117
2.5.12 C-0130
2.5.13 C-0201
2.5.14 C-0202
2.5.15 C-0204
2.5.16 C-0205
2.5.17 C-0208
2.5.18 C-0209
2.5.19 C-0211
2.5.20 C-0212
2.5.21 C-0213
2.5.22 C-0215
2.5.23 C-0230
2.5.24 C-0231
2.5.25 C-0232
2.5.26 C-0233
2.5.27 C-0234
2.5.28 C-0235
2.5.29 C-0236
2.5.30 C-0237
2.6 Solution 2 (C-0301_0400)
2.6.1 C-0301*
2.6.2 C-0302*
2.6.3 C-0303
2.6.4 C-0304*
2.6.5 C-0306
2.6.6 C-0307
2.6.7 C-0308
2.6.8 C-0309
2.6.9 C-0310
2.6.10 C-0311
2.6.11 C-0312
2.6.12 C-0313
2.6.13 C-0314
2.6.14 C-0315
2.6.15 C-0316
2.6.16 C-0317
2.6.17 C-0318
2.6.18 C-0320
2.6.19 C-0321
2.6.20 C-0322
2.6.21 C-0323*
2.6.22 C-0324*
2.6.23 C-0325
2.6.24 C-0326
2.6.25 C-0327
2.6.26 C-0328
2.6.27 C-0329
2.6.28 C-0330
2.6.29 C-0331
2.6.30 C-0332
2.6.31 C-0333
2.6.32 C-0334
2.6.33 C-0335
2.6.34 C-0336
2.6.35 C-0337
2.6.36 C-0338
2.6.37 C-0339
2.6.38 C-0340
2.6.39 C-0373*
2.6.40 C-0374*
2.6.41 C-0375*
2.6.42 C-0376*
2.7 Solution 3 (C-0401_0500)
2.7.1 C-0401
2.7.2 C-0402
2.7.3 C-0403
2.7.4 C-0404
2.7.5 C-0405
2.7.6 C-0406
2.7.7 C-0407
2.7.8 C-0408
2.7.9 C-0409
2.7.10 C-0410
2.7.11 C-0411
2.7.12 C-0412
2.7.13 C-0413
2.7.14 C-0414
2.7.15 C-0415
2.7.16 C-0416
2.7.17 C-0417
2.7.18 C-0418
2.7.19 C-0419
2.7.20 C-0420
2.7.21 C-0421
2.8 Solution 4 (C-1001_1126)
2.8.1 C-1005
2.8.2 C-1006
2.8.3 C-1007
2.8.4 C-1007
2.8.5 C-1009
2.8.6 C-1010
2.8.7 C-1011
2.8.8 C-1012
2.8.9 C-1013
2.8.10 C-1014
2.8.11 C-1101 (FS-531/612)
2.8.12 C-1102 (FS-531/612)
2.8.13 C-1102 (FS-532)
2.8.14 C-1102 (OT-510)
2.8.15 C-1103 (FS-531/612)
2.8.16 C-1103 (FS-532)
2.8.17 C-1104 (FS-531/612)
2.8.18 C-1105 (FS-531/612)
2.8.19 C-1105 (FS-532)
2.8.20 C-1105 (OT-510)
2.8.21 C-1106 (FS-531/612)
2.8.22 C-1106 (FS-532)
2.8.23 C-1107 (FS-612)
2.8.24 C-1108 (FS-612)
2.8.25 C-1109 (FS-531/612)
2.8.26 C-1109 (FS-532)
2.8.27 C-1110 (FS-531/612)
2.8.28 C-1111 (FS-612)
2.8.29 C-1112 (FS-612)
2.8.30 C-1113 (FS-612)
2.8.31 C-1113 (FS-532)
2.8.32 C-1114 (FS-612)
2.8.33 C-1114 (FS-532)
2.8.34 C-1115 (FS-612)
2.8.35 C-1115
2.8.36 C-1116 (FS-612)
2.8.37 C-1124
2.8.38 C-1125
2.8.39 C-1126
2.9 Solution 5 (C-1127_1230)
2.9.1 C-1127 (PK-512/513)
2.9.2 C-1127 (PK-522)
2.9.3 C-1132 (PK-512/513)
2.9.4 C-1132 (PK-522)
2.9.5 C-1137 (FS-531/612)
2.9.6 C-1137 (FS-532)
2.9.7 C-1141 (FS-532)
2.9.8 C-1144 (FS-532)
2.9.9 C-1144 (OT-510)
2.9.10 C-1147 (FS-532)
2.9.11 C-1147 (OT-510)
2.9.12 C-1153 (FS-532)
2.9.13 C-1153 (OT-510)
2.9.14 C-1154 (FS-532)
2.9.15 C-1154 (OT-510)
2.9.16 C-1155 (FS-532)
2.9.17 C-1155 (OT-510)
2.9.18 C-1156 (FS-532)
2.9.19 C-1157 (FS-532)
2.9.20 C-1158 (FS-532)
2.9.21 C-1159 (FS-532)
2.9.22 C-1170 (FS-532)
2.9.23 C-1170 (OT-510)
2.9.24 C-1171 (FS-532)
2.9.25 C-1172 (FS-532)
2.9.26 C-1173
2.9.27 C-1174
2.9.28 C-1175
2.9.29 C-1176
2.9.30 C-1177
2.9.31 C-1179 (FS-532)
2.9.32 C-1179 (OT-510)
2.9.33 C-1180
2.9.34 C-1181
2.9.35 C-1201
2.9.36 C-1202
2.9.37 C-1203
2.9.38 C-1204
2.9.39 C-1205
2.9.40 C-1206
2.9.41 C-1211
2.9.42 C-1212
2.9.43 C-1213
2.9.44 C-1214
2.9.45 C-1215
2.9.46 C-1216
2.9.47 C-1221
2.9.48 C-1222
2.9.49 C-1223
2.9.50 C-1224
2.9.51 C-1225
2.9.52 C-1226
2.9.53 C-1227
2.9.54 C-1228
2.9.55 C-1229
2.9.56 C-1230
2.10 Solution 6 (C-1231_1270)
2.10.1 C-1231
2.10.2 C-1232
2.10.3 C-1233
2.10.4 C-1234
2.10.5 C-1235
2.10.6 C-1241
2.10.7 C-1242
2.10.8 C-1242
2.10.9 C-1243
2.10.10 C-1243
2.10.11 C-1244
2.10.12 C-1244
2.10.13 C-1245
2.10.14 C-1245
2.10.15 C-1246
2.10.16 C-1246
2.10.17 C-1247
2.10.18 C-1247
2.10.19 C-1248
2.10.20 C-1248
2.10.21 C-1249
2.10.22 C-1249
2.10.23 C-1250
2.10.24 C-1250
2.10.25 C-1251
2.10.26 C-1251
2.10.27 C-1252
2.10.28 C-1252
2.10.29 C-1253
2.10.30 C-1253
2.10.31 C-1254
2.10.32 C-1254
2.10.33 C-1255
2.10.34 C-1256
2.10.35 C-1256
2.10.36 C-1257
2.10.37 C-1258
2.10.38 C-1258
2.10.39 C-1259
2.10.40 C-1259
2.10.41 C-1260
2.10.42 C-1260
2.10.43 C-1261
2.10.44 C-1261
2.10.45 C-1262
2.10.46 C-1262
2.10.47 C-1263
2.10.48 C-1263
2.10.49 C-1264
2.10.50 C-1264
2.10.51 C-1265
2.10.52 C-1265
2.10.53 C-1266
2.10.54 C-1266
2.10.55 C-1267
2.10.56 C-1267
2.10.57 C-1268
2.10.58 C-1268
2.10.59 C-1269
2.10.60 C-1269
2.10.61 C-1270
2.10.62 C-1270
2.11 Solution 7 (C-1271_1400)
2.11.1 C-1271
2.11.2 C-1271
2.11.3 C-1272
2.11.4 C-1272
2.11.5 C-1273
2.11.6 C-1273
2.11.7 C-1274
2.11.8 C-1275
2.11.9 C-1275
2.11.10 C-1276
2.11.11 C-1277
2.11.12 C-1278
2.11.13 C-1279
2.11.14 C-1280
2.11.15 C-1281
2.11.16 C-1282
2.11.17 C-1290
2.11.18 C-1291
2.11.19 C-1292
2.11.20 C-1293
2.11.21 C-1294
2.11.22 C-1295
2.11.23 C-1296
2.11.24 C-1297
2.11.25 C-1298
2.11.26 C-1299
2.11.27 C-1302
2.11.28 C-1303
2.11.29 C-1304
2.11.30 C-1305
2.11.31 C-1307
2.11.32 C-1308
2.11.33 C-1309
2.11.34 C-1310
2.11.35 C-1311
2.11.36 C-1312
2.11.37 C-1313
2.11.38 C-1330
2.11.39 C-1331
2.11.40 C-1332
2.11.41 C-1333
2.11.42 C-1334
2.11.43 C-1341
2.11.44 C-1342
2.11.45 C-1351
2.11.46 C-1352
2.11.47 C-1353
2.11.48 C-1354
2.11.49 C-1355
2.11.50 C-1356
2.11.51 C-1357
2.11.52 C-1358
2.11.53 C-1359
2.11.54 C-1360
2.11.55 C-1361
2.11.56 C-1364
2.12 Solution 8 (C-1401_1500)
2.12.1 C-1402
2.12.2 C-1403
2.12.3 C-1404
2.12.4 C-1404
2.12.5 C-1406
2.12.6 C-1407
2.12.7 C-1408
2.12.8 C-1411
2.12.9 C-1412
2.12.10 C-1413
2.12.11 C-1431
2.12.12 C-1432
2.12.13 C-1433
2.12.14 C-1433
2.12.15 C-1435
2.12.16 C-1436
2.12.17 C-1437
2.12.18 C-1438
2.12.19 C-1439
2.12.20 C-1440
2.12.21 C-1441
2.12.22 C-1442
2.12.23 C-1451
2.12.24 C-1452
2.12.25 C-1454
2.12.26 C-1455
2.12.27 C-1456
2.12.28 C-1499
2.13 Solution 9 (C-1501_1539)
2.13.1 C-1501
2.13.2 C-1502
2.13.3 C-1504
2.13.4 C-1505
2.13.5 C-1506
2.13.6 C-1507
2.13.7 C-1508
2.13.8 C-1509
2.13.9 C-1510
2.13.10 C-1511
2.13.11 C-1512
2.13.12 C-1513
2.13.13 C-1514
2.13.14 C-1515
2.13.15 C-1516
2.13.16 C-1517
2.13.17 C-1518
2.13.18 C-1519
2.13.19 C-1520
2.13.20 C-1521
2.13.21 C-1522
2.13.22 C-1523
2.13.23 C-1524
2.13.24 C-1525
2.13.25 C-1526
2.13.26 C-1527
2.13.27 C-1528
2.13.28 C-1530
2.13.29 C-1531
2.13.30 C-1532
2.13.31 C-1534
2.13.32 C-1537
2.13.33 C-1538
2.14 Solution 10 (C-1540_1633)
2.14.1 C-1540
2.14.2 C-1541
2.14.3 C-1542
2.14.4 C-1543
2.14.5 C-1544
2.14.6 C-1545
2.14.7 C-1546
2.14.8 C-1547
2.14.9 C-1548
2.14.10 C-1549
2.14.11 C-1550
2.14.12 C-1551
2.14.13 C-1552
2.14.14 C-1553
2.14.15 C-1554
2.14.16 C-1555
2.14.17 C-1556
2.14.18 C-1557
2.14.19 C-1558
2.14.20 C-1559
2.14.21 C-1560
2.14.22 C-1561
2.14.23 C-1562
2.14.24 C-1565
2.14.25 C-1566
2.14.26 C-1567
2.14.27 C-1620
2.14.28 C-1621
2.14.29 C-1622
2.14.30 C-1623
2.14.31 C-1625
2.14.32 C-1626
2.14.33 C-1627
2.14.34 C-1628
2.14.35 C-1629
2.14.36 C-1630
2.14.37 C-1632
2.14.38 C-1633
2.15 Solution 11 (C-2001_2400)
2.15.1 C-2001
2.15.2 C-2004
2.15.3 C-2201
2.15.4 C-2202
2.15.5 C-2203
2.15.6 C-2204
2.15.7 C-2211
2.15.8 C-2212
2.15.9 C-2213
2.15.10 C-2214
2.15.11 C-2220
2.15.12 C-2221
2.15.13 C-2222
2.15.14 C-2223
2.15.15 C-2224
2.15.16 C-2225
2.15.17 C-2302*
2.15.18 C-2303*
2.15.19 C-2304*
2.15.20 C-2305*
2.15.21 C-2306*
2.15.22 C-2307*
2.16 Solution 12 (C-2401_2500)
2.16.1 C-2401
2.16.2 C-2402
2.16.3 C-2403
2.16.4 C-2404
2.16.5 C-2431
2.16.6 C-2432
2.16.7 C-2433
2.16.8 C-2434
2.16.9 C-2441
2.16.10 C-2442
2.16.11 C-2443
2.16.12 C-2444
2.16.13 C-2451
2.16.14 C-2452
2.16.15 C-2453
2.16.16 C-2454
2.16.17 C-2455
2.16.18 C-2456
2.16.19 C-2457
2.16.20 C-2458
2.16.21 C-2470
2.17 Solution 13 (C-2701_2800)
2.17.1 C-2701
2.17.2 C-2702
2.17.3 C-2703
2.17.4 C-2704
2.17.5 C-2711
2.17.6 C-2712
2.17.7 C-2713
2.17.8 C-2714
2.17.9 C-2720
2.17.10 C-2721
2.18 Solution 14 (C-2801_3000)
2.18.1 C-2801
2.18.2 C-2802
2.18.3 C-2803
2.18.4 C-2804
2.18.5 C-2811
2.18.6 C-2812
2.18.7 C-2813
2.18.8 C-2814
2.18.9 C-2821
2.18.10 C-2822
2.18.11 C-2823
2.18.12 C-2824
2.18.13 C-2831
2.18.14 C-2832
2.18.15 C-2833
2.18.16 C-2834
2.18.17 C-2840
2.18.18 C-2841
2.19 Solution 15 (C-3001_3500)
2.19.1 C-3001
2.19.2 C-3101
2.19.3 C-3102
2.19.4 C-3103
2.19.5 C-3104
2.19.6 C-3105
2.19.7 C-3301*
2.19.8 C-3302*
2.19.9 C-3303
2.19.10 C-3304*
2.19.11 C-3305*
2.19.12 C-3307*
2.19.13 C-3308*
2.19.14 C-3401
2.20 Solution 16 (C-3501_4000)
2.20.1 C-3501 *
2.20.2 C-3502 *
2.20.3 C-3503 *
2.20.4 C-3504 *
2.20.5 C-3505*
2.20.6 C-3506*
2.20.7 C-3508*
2.20.8 C-3509*
2.20.9 C-3510*
2.20.10 C-3511*
2.20.11 C-3512*
2.20.12 C-3513*
2.20.13 C-3515*
2.20.14 C-3517*
2.20.15 C-3518*
2.20.16 C-3519*
2.20.17 C-3801*
2.20.18 C-3802*
2.20.19 C-3803*
2.20.20 C-3807*
2.20.21 C-3901*
2.20.22 C-3902*
2.20.23 C-3903*
2.20.24 C-3904*
2.20.25 C-3905*
2.20.26 C-3906*
2.20.27 C-3907*
2.20.28 C-3908*
2.20.29 C-3909*
2.20.30 C-3910*
2.20.31 C-3911*
2.20.32 C-3912*
2.20.33 C-3913*
2.20.34 C-3917*
2.21 Solution 17 (C-4001_5000)
2.21.1 C-4101
2.21.2 C-4102
2.21.3 C-4103
2.21.4 C-4104
2.21.5 C-4501
2.21.6 C-4502
2.21.7 C-4503
2.21.8 C-4504
2.21.9 C-4505
2.21.10 C-4506
2.21.11 C-4507
2.21.12 C-4508
2.21.13 C-4511
2.21.14 C-4512
2.21.15 C-4513
2.21.16 C-4514
2.21.17 C-4515
2.21.18 C-4516
2.21.19 C-4517
2.21.20 C-4518
2.21.21 C-4520
2.21.22 C-4521
2.21.23 C-4522
2.21.24 C-4525
2.21.25 C-4526
2.21.26 C-4527
2.21.27 C-4528
2.21.28 C-4601
2.21.29 C-4602
2.21.30 C-4603
2.21.31 C-4604
2.21.32 C-4611
2.21.33 C-4612
2.21.34 C-4613
2.21.35 C-4614
2.21.36 C-4631
2.21.37 C-4632
2.21.38 C-4633
2.21.39 C-4634
2.21.40 C-4641
2.21.41 C-4642
2.21.42 C-4643
2.21.43 C-4644
2.21.44 C-4661
2.21.45 C-4662
2.21.46 C-4663
2.21.47 C-4705
2.21.48 C-4709
2.21.49 C-4713
2.21.50 C-4714
2.21.51 C-4715
2.21.52 C-4716
2.21.53 C-4717
2.21.54 C-4718
2.21.55 C-4719
2.21.56 C-4720
2.21.57 C-4721
2.21.58 C-4722
2.21.59 C-4723
2.21.60 C-4724
2.21.61 C-4725
2.21.62 C-4726
2.21.63 C-4728
2.21.64 C-4840
2.21.65 C-4850*
2.22 Solution 18 (C-5001_6000)
2.22.1 C-5001
2.22.2 C-5002 *
2.22.3 C-5003
2.22.4 C-5006
2.22.5 C-5007
2.22.6 C-5010
2.22.7 C-5014
2.22.8 C-5025
2.22.9 C-5100
2.22.10 C-5101
2.22.11 C-5121
2.22.12 C-5301*
2.22.13 C-5305*
2.22.14 C-5307*
2.22.15 C-5309*
2.22.16 C-5310*
2.22.17 C-5311*
2.22.18 C-5401
2.22.19 C-5403
2.22.20 C-5404
2.23 Solution 19 (C-6001_7000)
2.23.1 C-6102
2.23.2 C-6103
2.23.3 C-6104
2.23.4 C-6105
2.23.5 C-6114
2.23.6 C-6115
2.23.7 C-6121
2.23.8 C-6702
2.23.9 C-6703
2.23.10 C-6704
2.23.11 C-6706
2.23.12 C-6720
2.23.13 C-6725
2.23.14 C-6751
2.23.15 C-6752
2.23.16 C-6753
2.23.17 C-6754
2.23.18 C-6755
2.23.19 C-6756
2.23.20 C-6781
2.23.21 C-6782
2.23.22 C-6801
2.23.23 C-6802
2.23.24 C-6F01
2.24 Solution 20 (C-7001_9999)
2.24.1 C-7001
2.24.2 C-8001
2.24.3 C-8101
2.24.4 C-8103
2.24.5 C-8106
2.24.6 C-8107
2.24.7 C-8302
2.24.8 C-8401
2.24.9 C-8402
2.24.10 C-9401
2.24.11 C-9402
2.24.12 C-9403
2.24.13 C-9404
2.25 Solution 20 (C-C001_C200)
2.25.1 C-C101
2.25.2 C-C102
2.25.3 C-C104
2.25.4 C-C109
2.25.5 C-C111
2.25.6 C-C112
2.25.7 C-C113
2.25.8 C-C114
2.25.9 C-C114
2.25.10 C-C116
2.25.11 C-C117
2.25.12 C-C118
2.25.13 C-C119
2.25.14 C-C120
2.25.15 C-C121
2.25.16 C-C123
2.25.17 C-C124
2.25.18 C-C131
2.25.19 C-C132
2.25.20 C-C137
2.25.21 C-C138
2.25.22 C-C139
2.25.23 C-C140
2.25.24 C-C150
2.25.25 C-C151
2.25.26 C-C152
2.25.27 C-C156
2.25.28 C-C170
2.26 Solution 22 (C-C201_E100)
2.26.1 C-D010
2.26.2 C-D060
2.26.3 C-D070
2.26.4 C-D080
2.26.5 C-D0C0
2.26.6 C-D0D1
2.26.7 C-D0E1
2.26.8 C-D0E3
2.26.9 C-D0E4
2.26.10 C-D0E5
2.26.11 C-D0E8
2.26.12 C-D0EF
2.26.13 C-D0F0
2.26.14 C-D0F1
2.26.15 C-D0F2
2.26.16 C-D0F5
2.26.17 C-D0F6
2.26.18 C-D0F8
2.26.19 C-D0FE
2.26.20 C-E001
2.26.21 C-E002
2.26.22 C-E003
2.26.23 C-E004
2.26.24 C-E005
2.26.25 C-E006
2.26.26 C-E007
2.26.27 C-E008
2.26.28 C-E009
2.26.29 C-E012
2.26.30 C-E013
2.26.31 C-E014
2.26.32 C-E015
2.26.33 C-E017
2.26.34 C-E018
2.26.35 C-E020
3. TROUBLES THAT DO NOT DISPLAY THE MALFUNCTION CODE
3.1 The power of main body does not become active
3.1.1 Activate the main power switch but the power LED of the operation panel does not light up in orange
3.1.2 Activate the main power switch and the sub power switch, but the touch panel does not display anything
3.1.3 Activate the sub power switch but the power LED does not switch from orange to blue
3.1.4 The operation panel stops on the “Please wait starting system” screen
3.2 The power is not supplied to DF
3.3 The power is not supplied to the paper feed option
3.3.1 PF-602m
3.3.2 PF-707
3.3.3 LU-202m
3.3.4 LU-202XL
3.4 The power is not supplied to the finishing option
3.4.1 RU-509
3.4.2 RU-510
3.4.3 FS-531 /FS-612
3.4.4 FS-532
3.4.5 OT-510
3.4.6 LS-506
3.4.7 FD-503
3.4.8 SD-506
3.4.9 SD-513
3.4.10 PB-503
3.4.11 GP-501
4. IMAGE TROUBLE
4.1 Outline of solution
4.1.1 Test pattern print
4.2 Solution
4.2.1 Image trouble sample illustrations
4.2.2 White line 1, white band 1, color stripe 1, color band 1
4.2.3 White line 2, white band 2, color stripe 2, color band 2
4.2.4 Uneven density 1
4.2.5 Uneven density 2
4.2.6 Gradation error
4.2.7 Inky backside
4.2.8 Color reproduction error
4.2.9 Color registration error
4.2.10 Gray background
4.2.11 Low image density
4.2.12 Color spots
4.2.13 White spots, void areas
4.2.14 Blurry white spots, blurry color spots
4.2.15 Image erasure at leading edge, image erasure at trailing edge
4.2.16 Thick paper leading edge repelling, Thick paper trailing edge repelling
4.2.17 Blank print, black print
4.2.18 Ripple unevenness (solid images of R, B, G)
4.2.19 Moire
4.2.20 Uneven gloss, trails of rollers
4.2.21 Image memory, size memory
4.2.22 Darker at trailing edge, faint at leading edge
4.2.23 Pitch unevenness
4.2.24 Periodical white dot, color dot
4.2.25 Poor fusing performance, offset
4.2.26 Blurred image
4.2.27 Brush effect, image bleeding
4.2.28 Paper crease, bleeding
4.2.29 Developing ghost
4.2.30 Image skew
4.2.31 Image distortion
4.2.32 ACS abnormality
4.2.33 Image abnormality
4.2.34 The density differs between the original and copy outputs
4.2.35 The color differs between the original and copy outputs
5. IC PROTECTOR
5.1 Outline
5.2 IC protector list
5.2.1 AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L
5.2.2 PF-602m, HT-504
5.2.3 PF-707, HT-506
5.2.4 LU-202, LU-202XL
5.2.5 RU-509, HM-102
5.2.6 FS-531
5.2.7 FS-612
5.2.8 PI-502
5.2.9 FS-532
5.2.10 SD-510
5.2.11 OT-510
5.2.12 PK-522
5.2.13 LS-506
5.2.14 FD-503
5.2.15 SD-506
5.2.16 SD-513
5.2.17 TU-503
5.2.18 FD-504
5.2.19 PB-503
5.3 IC protector location
5.3.1 AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L
5.3.2 PF-602m, HT-504
5.3.3 PF-707, HT-506
5.3.4 LU-202m/LU-202XL
5.3.5 RU-509, HM-102
5.3.6 FS-531
5.3.7 FS-612
5.3.8 PI-502
5.3.9 FS-532
5.3.10 SD-510
5.3.11 OT-510
5.3.12 PK-522
5.3.13 LS-506
5.3.14 SD-506
5.3.15 SD-513
5.3.16 TU-503
5.3.17 FD-504
6. TROUBLESHOOTING (IC-603)
6.1 IC malfunction code list
6.2 IC solution
6.2.1 00-001
6.2.2 00-002
6.2.3 01-001
6.2.4 01-002
6.2.5 02-001
7. TROUBLESHOOTING (GP-501)
7.1 TROUBLESHOOTING (GP-501)
7.2 Troubleshooting
7.2.1 Troubleshooting
7.2.2 General
7.2.3 Back Gauge
7.2.4 Die Set
7.3 Initial Service Action
7.3.1 Initial Service Action
7.4 Mis-Feed Service Action
7.4.1 Mis-Feed Service Action
7.5 Final Service Action
7.5.1 Final Service Action
8. OTHER ABNORMALITIES (ERROR CODES, TROUBLESHOOTINGS)

L) PARTS/CONNECTOR LAYOUT DRAWING
1. PARTS LAYOUT DRAWING
1.1 AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L
1.1.1 Main body rear side 1
1.1.2 Main body rear side 2
1.1.3 Main body upper surface
1.1.4 Main body left side
1.1.5 Main body front side1
1.1.6 Main body front side2
1.1.7 Write section
1.1.8 Developing section
1.1.9 Intermediate transfer section
1.1.10 Image correction unit section
1.1.11 Paper feed tray
1.1.12 Vertical conveyance section
1.1.13 Registration section
1.1.14 Duplex section 1
1.1.15 Duplex section 2
1.1.16 Duplex section 3
1.1.17 Fusing section
1.1.18 Paper exit section
1.1.19 Operation panel section
1.1.20 Charge control section
1.2 DF-706
1.3 PF-602m/HT-504/505
1.3.1 Configuration front side
1.3.2 Configuration rear side
1.3.3 Vertical conveyance section
1.3.4 Horizontal conveyance section
1.3.5 Tray section 1
1.3.6 Tray section2
1.4 PF-707, HT-506
1.4.1 Front side
1.4.2 Rear side
1.4.3 Vertical conveyance section front side
1.4.4 Vertical conveyance section rear side
1.4.5 Vertical conveyance section top side
1.4.6 Horizontal conveyance section bottom side
1.4.7 Horizontal conveyance section rear side
1.4.8 Paper feed trays 1 to 3 section
1.4.9 Paper feed suction section
1.4.10 HT-506
1.5 LU-202m/LU-202XL/HT-503/HT-514
1.5.1 Paper feed/up/down section
1.5.2 Paper feed/up/down section (LU-202XL)
1.5.3 Inside the machine
1.5.4 Inside the machine (LU-202XL)
1.5.5 HT-503
1.5.6 HT-514
1.6 MB-506
1.7 OT-510
1.7.1 Rear side
1.7.2 Right side
1.7.3 Left side 1
1.7.4 Left side 2
1.7.5 Upper surface
1.8 OT-511
1.9 EF-103
1.10 RU-509/HM-102
1.10.1 Right side
1.10.2 Left-side view
1.10.3 Rear side 1
1.10.4 Rear side2
1.10.5 Humidification section front side
1.10.6 Humidification section rear side
1.10.7 Output paper density detection section
1.11 RU-510
1.11.1 Right side
1.11.2 Left-side view
1.11.3 Rear side
1.12 FS-531
1.12.1 Front side
1.12.2 Rear side
1.12.3 Stacker section rear side
1.12.4 Stapler section
1.13 FS-612
1.13.1 Front side
1.13.2 Rear side
1.13.3 Folding section
1.13.4 Stapler section
1.14 PK-512/513
1.15 PI-502
1.16 FS-532
1.16.1 Rear side
1.16.2 Right side
1.16.3 Left side 1
1.16.4 Left side 2
1.16.5 Front side
1.16.6 Upper surface
1.16.7 Stacker 1
1.16.8 Stacker 2
1.16.9 Stacker 3
1.16.10 Stapler
1.17 SD-510
1.17.1 Rear side
1.17.2 Front side
1.17.3 Bottom 1
1.17.4 Bottom 2
1.17.5 Stapler
1.18 PK-522
1.19 MK-732
1.20 LS-506
1.20.1 Front side
1.20.2 Upper surface
1.20.3 Rear side
1.20.4 Shift unit
1.21 FD-503
1.21.1 Conveyance section front side/right side
1.21.2 Major boards in the power source section
1.21.3 Conveyance section rear side/left side
1.21.4 PI rear side
1.21.5 PI upper surface
1.21.6 PI lower tray
1.21.7 Punch section
1.21.8 Folding unit front side/right side
1.21.9 Folding unit rear side/left side
1.22 SD-506
1.22.1 Horizontal conveyance section
1.22.2 Right angle conveyance section
1.22.3 Folding section
1.22.4 Saddle stitching section
1.22.5 Bundle processing section
1.22.6 Trimmer section
1.22.7 Left-side view
1.22.8 Front side
1.22.9 Rear side
1.23 SD-513
1.23.1 Rear console front side 1
1.23.2 Rear console front side 2
1.23.3 Rear console rear side
1.23.4 Front console
1.23.5 Entrance conveyance section
1.23.6 Folding conveyance section
1.23.7 Sub tray/tri-folding tray section 1
1.23.8 Sub tray/tri-folding tray section 2
1.23.9 Saddle stitching section
1.23.10 Booklet movement section
1.23.11 Clamp section
1.23.12 Trimmer section
1.23.13 Booklet tray section
1.24 CR-101
1.25 TU-503
1.26 FD-504
1.26.1 Clamp up down section
1.26.2 Spine corner forming section
1.26.3 SD-513 left side
1.27 PB-503
1.27.1 SC section
1.27.2 Clamp section
1.27.3 Pellet supply section
1.27.4 Glue tank section
1.27.5 Cover paper supply section
1.27.6 Cover paper table section
1.27.7 Book stock section
1.27.8 Conveyance section and framework section
1.27.9 Relay conveyance section
1.28 GP-501
1.28.1 Rear side 1/Right side 1
1.28.2 Rear side 2/Left side
1.28.3 Right side 2
1.28.4 Front side
1.28.5 Bypass conveyance section
1.28.6 Punch conveyance section
1.29 GP-502
2. CONNECTOR LAYOUT DRAWING IN BOARD
2.1 AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L
2.1.1 Overall control board
2.1.2 Printer control board
2.1.3 Printer image processing board
2.1.4 Scanner image processing board
2.1.5 Scanner drive board
2.1.6 Conveyance drive board
2.1.7 DC power supply/1
2.1.8 DC power supply/2
2.1.9 High voltage unit/1
2.1.10 High voltage unit/2
2.1.11 High voltage unit/3
2.1.12 Operation board/1
2.1.13 Operation board/2
2.1.14 LCD board
2.1.15 CCD board
2.1.16 Scanner inverter board
2.1.17 NVRAM board
2.1.18 USB relay board
2.2 DF-706
2.2.1 DF control board (DFCB)
2.2.2 DF power supply (DFPU)
2.2.3 Sensor control board (SCB)
2.2.4 Multi feed detection board/1 (transmitter) (MFDB/1)
2.2.5 Multi feed detection board/2 (receiver) (MFDB/2)
2.3 PF-602m/HT-504/505
2.3.1 PF drive board (PFDB)
2.3.2 AC drive board (ACDB)
2.4 PF-707/HT-506
2.4.1 PF drive board (PFDB)
2.4.2 AC drive board (ACDB)
2.4.3 DC power supply/1, /2 (DCPS/1, /2)
2.4.4 Multi-feed detection board/R, /S (MFDBR, MFDBS)
2.5 LU-202m/LU-202XL/HT-503/HT-514
2.5.1 LU drive board (LUDB) (LU-202m)
2.5.2 LU drive board (LUDB) (LU-202XL)
2.5.3 AC drive board (ACDB)
2.6 OT-510
2.6.1 FNS control board
2.7 RU-509/HM-102
2.7.1 RU control board (RUCB)
2.7.2 HM drive board (HMDB)
2.7.3 DC power supply (DCPS)
2.7.4 Color density detection board/Y, /M, /C, /K (CDDBY, CDDBM, CDDBC, CDDBK)
2.7.5 Color density control board (CDCB)
2.7.6 Color density relay board (CDRLB)
2.7.7 Jam indication board (JAMIB)
2.8 RU-510
2.8.1 RU control board (RUCB)
2.8.2 Jam indication board (JAMIB)
2.9 FS-531
2.9.1 FNS control board (FNSCB)
2.9.2 Relay board (RB)
2.10 FS-612
2.10.1 FNS control board (FNSCB)
2.10.2 Relay board (RB)
2.11 PK-512/513
2.11.1 Punch drive board (PDB)
2.11.2 Paper size sensor board
2.12 PI-502
2.12.1 PI drive board (PIDB)
2.12.2 PI operation board (PIOB)
2.13 FS-532
2.13.1 FNS control board
2.13.2 Jam indication board
2.14 SD-510
2.14.1 SD control board
2.15 PK-522
2.15.1 Punch drive board (PDB)
2.15.2 Paper size sensor board
2.16 LS-506
2.16.1 LS control board (LSCB)
2.16.2 Relay board/1 (RLB/1)
2.16.3 Relay board/2 (RLB/2)
2.16.4 DC power supply (DCPS)
2.16.5 Relay board (RLB)
2.17 FD-503
2.17.1 FD control board (FDCB)
2.17.2 Punch drive board (PDB)
2.17.3 Folding drive board (FDB)
2.17.4 PI drive board (PIDB)
2.17.5 FD operation board (FDOB)
2.17.6 Jam indication board (JAMIB)
2.17.7 DC power supply (DCPS)
2.17.8 Multi feed detection board/1, /2 (MFDB1, 2)
2.18 SD-506
2.18.1 SD control board (SDCB)
2.18.2 SD drive board (SDDB)
2.18.3 SD drive board/2 (SDDB/2)
2.18.4 DC power supply/1 (DCPS1)
2.18.5 DC power supply/2 (DCPS2)
2.18.6 DC power supply/3 (DCPS3)
2.18.7 Jam indication board/1 (JAMIB/1)
2.18.8 Jam indication board/2 (JAMIB/2)
2.19 SD-513
2.19.1 SD control board (PCB1)
2.19.2 SD drive board (PCB2)
2.19.3 Rear console jam indication board (PCB5)
2.19.4 Front console jam indication board (PCB6)
2.19.5 DC power supply/1 (DCPS1)
2.19.6 DC power supply/2 (DCPS2)
2.20 TU-503
2.20.1 Slitter drive board (TUDB)
2.21 FD-504
2.21.1 FD drive board (FDDB)
2.22 PB-503
2.22.1 PB control board (PBCB)
2.22.2 AC drive board (ACDB)
2.22.3 PB drive board/1 (PBDB1)
2.22.4 PB drive board/2 (PBDB2)
2.22.5 PB drive board/3 (PBDB3)
2.22.6 Jam indication board/1 (JAMB1)
2.22.7 Jam indication board/2 (JAMB2)
2.22.8 Manual operation board (OB1)
2.22.9 Booklet stock operation board (OB2)
2.22.10 DC power supply/1 (DCPU/1)
2.22.11 DC power supply/2 (DCPU/2)
2.22.12 DC power supply/3 (DCPU/3)
2.22.13 DC power supply/4 (DCPU/4)
2.22.14 DC power supply/5 (DCPU/5)
2.23 GP-501
2.23.1 Punch Controller PCB
2.24 GP-502
3. RELAY CONNECTOR LAYOUT DRAWING
3.1 SD-506
3.1.1 Right side
3.1.2 Left side
3.1.3 Rear side-1
3.1.4 Rear side-2
3.1.5 Folding section
3.1.6 Saddle stitching section-1
3.1.7 Saddle stitching section-2
3.2 PB-503
3.2.1 Rear side-1
3.2.2 Rear side 2
3.2.3 Rear side 3
3.2.4 Rear side 4
3.2.5 Rear side 5
3.2.6 Front side
3.2.7 Sub compile (SC) section
3.2.8 Clamp section
3.2.9 Cover paper supply section
3.2.10 Cover paper table section
3.2.11 Book stock section
3.2.12 Conveyance section
3.2.13 Pellet supply section
3.2.14 Relay conveyance section

M) TIMING CHART
1. AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L
1.1 Timing chart when the sub power switch becomes active (in the morning)
1.2 Timing chart when the sub power switch becomes active (not in the morning)
1.3 Timing chart of the duplex mode
1.3.1 Operation condition
1.3.2 Timing chart
2. DF-706
2.1 Timing chart of the duplex mode
2.1.1 Operation condition
2.1.2 Timing chart diagram
3. PF-602m
3.1 Tray4, A4, 2 sheets of original
4. PF-707
4.1 Timing chart of the simplex mode
4.1.1 Operation condition
4.1.2 Timing chart
5. LU-202m, LU-202XL
5.1 A4, simplex, 2 sheets
5.2 A3, simplex, 2 sheets
6. OT-510
6.1 Timing chart of the straight mode
6.1.1 Operation condition
6.1.2 Timing chart
7. RU-509/HM-102
7.1 Timing chart of the humidifier OFF mode (bypass conveyance)
7.1.1 Operation condition
7.1.2 Timing chart
7.2 Timing chart of the humidification mode
7.2.1 Operation condition
7.2.2 Timing chart
8. RU-510
8.1 Timing chart of the straight exit mode
8.1.1 Operation condition
8.1.2 Timing chart
8.2 Timing chart of the single sheet reverse/exit mode
8.2.1 Operation condition
8.2.2 Timing chart
8.3 Timing chart of the double sheets reverse/exit conveyance mode
8.3.1 Operation condition
8.3.2 Timing chart
9. FS-531
9.1 Timing chart of the sort mode
9.1.1 Operation condition
9.1.2 Timing chart
9.2 Timing chart of the flat-stapling mode
9.2.1 Operation condition
9.2.2 Timing chart
10. FS-612
10.1 Timing chart of the sort mode
10.1.1 Operation condition
10.1.2 Timing chart
10.2 Timing chart of the flat-stapling mode
10.2.1 Operation condition
10.2.2 Timing chart
10.3 Timing chart of the saddle stitching mode
10.3.1 Operation condition
10.3.2 Timing chart
10.4 Timing chart of the tri-folding mode
10.4.1 Operation condition
10.4.2 Timing chart
11. PK-512/513
11.1 Punch, 2 flat stitching staples, A4, 2 originals, 3 copies, Single side
12. PI-502
12.1 Timing chart of the PI automatic paper feed mode
12.1.1 Operation condition
12.1.2 Timing chart
13. FS-532
13.1 Timing chart of the straight mode
13.1.1 Operation condition
13.1.2 Timing chart
13.2 Timing chart of the staple mode
13.2.1 Operation condition
13.2.2 Timing chart
14. SD-510
14.1 Time chart of the saddle stitching mode
14.1.1 Operation condition
14.1.2 Timing chart
14.2 Timing chart of the folding mode
14.2.1 Operation condition
14.2.2 Timing chart
14.3 Timing chart of the tri-folding mode
14.3.1 Operation condition
14.3.2 Timing chart
15. PK-522
15.1 Timing chart of the punch mode
15.1.1 Operation condition
15.1.2 Timing chart
16. LS-506
16.1 Timing chart of the straight mode
16.1.1 Operation condition
16.1.2 Timing chart
16.2 Timing chart of the shift mode
16.2.1 Operation condition
16.2.2 Timing chart
16.3 Timing chart of the sub tray mode
16.3.1 Operation condition
16.3.2 Timing chart
16.4 Timing chart of the coupling mode
16.4.1 Operation condition
16.4.2 Timing chart
17. FD-503
17.1 Timing chart of the letter fold-in mode
17.1.1 Operation condition
17.1.2 Timing chart
17.2 Timing chart of the letter fold-out mode
17.2.1 Operation condition
17.2.2 Timing chart
17.3 Timing chart of the double parallel mode
17.3.1 Operation condition
17.3.2 Timing chart
17.4 Timing chart of the half-folding mode
17.4.1 Operation condition
17.4.2 Timing chart
17.5 Timing chart of the gate fold mode
17.5.1 Operation condition
17.5.2 Timing chart
17.6 Timing chart of the Z-fold mode
17.6.1 Operation condition
17.6.2 Timing chart
17.7 Timing chart of the PI cover paper insertion mode
17.7.1 Operation condition
17.7.2 Timing chart
17.8 Timing chart of the punch mode
17.8.1 Operation condition
17.8.2 Timing chart
18. SD-506
18.1 Timing chart of the straight mode
18.1.1 Operation condition
18.1.2 Timing chart
18.2 Timing chart of the sub tray mode
18.2.1 Operation condition
18.2.2 Timing chart
18.3 Timing chart of the overlap tri-folding mode
18.3.1 Operation condition
18.3.2 Timing chart
18.4 Timing chart of the saddle stitching (trimmer) mode
18.4.1 Operation condition
18.4.2 Timing chart
19. SD-513
19.1 Timing chart of the straight mode
19.1.1 Operation condition
19.1.2 Timing chart
19.2 Timing chart of the sub tray mode
19.2.1 Operation condition
19.2.2 Timing chart
19.3 Timing chart of the overlap tri-folding mode
19.3.1 Operation condition
19.3.2 Timing chart
19.4 Timing chart of the multi half-folding mode
19.4.1 Operation condition
19.4.2 Timing chart
19.5 Time chart of the saddle stitching mode
19.5.1 Operation condition
19.5.2 Timing chart
19.6 Time chart of the spine corner forming mode
19.6.1 Operation condition
19.6.2 Timing chart
19.7 Time chart of the crease and slit mode
19.7.1 Operation condition
19.7.2 Timing chart
20. PB-503
20.1 Timing chart of the sub tray paper exit mode
20.1.1 Operation condition
20.1.2 Timing chart
20.2 Timing chart of the perfect binding mode (PB cover paper supply)
20.2.1 Operation condition
20.2.2 Timing chart
20.3 Timing chart of the perfect binding mode (Main body cover paper supply)
20.3.1 Operation condition
20.3.2 Timing chart
20.4 Timing chart of the relay conveyance mode
20.4.1 Operation condition
20.4.2 Timing chart

N) WIRING DIAGRAM
1. AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L
1.1 AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L (1/4)
1.2 AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L (2/4)
1.3 AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L (3/4)
1.4 AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L (4/4)
2. DF-706
3. PF-602m
4. PF-707
4.1 PF-707 (1/2)
4.2 PF-707 (2/2)
5. LU-202m
6. LU-202XL
7. OT-510
8. EF-103
9. RU-509
10. RU-510
11. FS-531
12. FS-612
13. PK-512/513
14. PI-502
15. FS-532
16. SD-510
17. PK-522
18. LS-506
19. FD-503
20. SD-506
21. SD-513
21.1 SD-513 (1/2)
21.2 SD-513 (2/2)
22. CR-101
23. TU-503
24. FD-504
25. PB-503
26. GP-501
27. GP-502

O0 THEORY OF OPERATION AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L
1. OUTLINE
1.1 Unit configuration
1.2 Paper path
2. INTERFACE SECTION
2.1 Configuration
2.1.1 Main body right side
2.1.2 Main body left side
2.1.3 Main body upper side
3. SCANNER SECTION
3.1 Configuration
3.2 Drive
3.3 Operation
3.3.1 LED exposure unit
3.3.2 When the power turns ON
3.3.3 Control when the Start key is pressed
3.3.4 Original scanning area
3.3.5 Original size detection control
3.3.6 Image processing
4. WRITING SECTION
4.1 Configuration
4.2 Operation
4.2.1 Exposure path
4.2.2 Writing control
4.2.3 Writing area
4.2.4 Color registration control
4.2.5 Front and back sides skew correction in the main scan direction
4.2.6 Back side magnification adjustment in sub scan direction
4.2.7 Image stabilization control
5. PHOTO CONDUCTOR SECTION
5.1 Configuration
5.2 Drive
5.3 Operation
5.3.1 Erase lamp (EL) control
5.3.2 Image stabilization control
6. CHARGING SECTION
6.1 Configuration
6.2 Operation
6.2.1 Charging control
6.2.2 Image stabilization control
7. DEVELOPING SECTION
7.1 Configuration
7.2 Drive
7.3 Operation
7.3.1 Developer conveyance
7.3.2 Developing bias
7.3.3 Developing suction control
7.3.4 Developing cooling control
7.3.5 Auto refining developing system
7.3.6 Image stabilization control
8. TONER SUPPLY SECTION
8.1 Configuration
8.2 Drive
8.2.1 Toner bottle drive
8.2.2 Toner supply drive
8.3 Operation
8.3.1 Toner conveyance device
8.3.2 Toner supply control to the toner hopper
8.3.3 Toner supply control to the developing unit
8.3.4 Remaining toner amount detection control
8.3.5 Stop control of printing without toner
9. INTERMEDIATE TRANSFER SECTION
9.1 Configuration
9.2 Drive
9.2.1 Transfer belt conveyance pressure drive
9.2.2 2nd transfer pressure release mechanism
9.3 Operation
9.3.1 Transfer belt conveyance, 1st transfer roller pressure and release mechanism
9.3.2 1st transfer control
9.3.3 2nd transfer mechanism
9.3.4 2nd transfer control
9.3.5 Separation claw control
9.3.6 Image correction unit shutter mechanism
9.3.7 Blade setting mode control
9.3.8 Belt filming prevention control
9.3.9 Image stabilization control
10. TONER COLLECTION SECTION
10.1 Configuration
10.2 Drive
10.3 Operation
10.3.1 Toner collection control
10.3.2 Waste toner box detection control
10.3.3 Waste toner box full detection control
11. PAPER FEED SECTION
11.1 Configuration
11.2 Drive
11.2.1 Paper feed drive
11.2.2 Tray up down drive
11.3 Operation
11.3.1 Up down control
11.3.2 Paper size detection control
11.3.3 Paper feed control
11.3.4 Remaining paper detection control
11.3.5 Dehumidification heater control (HT-511 option)
12. VERTICAL CONVEYANCE SECTION
12.1 Configuration
12.2 Drive
12.3 Operation
12.3.1 Vertical conveyance control
13. REGISTRATION SECTION
13.1 Configuration
13.2 Drive
13.2.1 Registration roller drive, registration roller swing drive
13.2.2 Registration roller pressure release drive
13.2.3 Loop roller drive
13.2.4 Loop roller pressure release drive
13.3 Operation
13.3.1 Loop control
13.3.2 Loop roller pressure release control
13.3.3 Registration roller pressure release control
13.3.4 Centering adjustment control
13.3.5 Registration operation
13.3.6 Paper leading edge timing adjustment control
13.3.7 Registration speed control
14. FUSING SECTION
14.1 Configuration
14.2 Drive
14.2.1 Fusing roller drive
14.2.2 Fusing pressure release drive
14.2.3 Fusing swing drive
14.3 Operation
14.3.1 Fusing roller drive control
14.3.2 Pressure release control
14.3.3 Fusing temperature control
14.3.4 Malfunction protection
14.3.5 Fusing roller/Lw cooling control
14.3.6 Fusing recovery control
14.3.7 Fusing air separation control
14.3.8 Fusing swing control
14.3.9 Fusing control
15. DUPLEX SECTION
15.1 Configuration
15.2 Drive
15.2.1 Intermediate conveyance, ADU conveyance drive
15.2.2 ADU reverse roller drive
15.2.3 Intermediate conveyance roller pressure and release drive
15.2.4 ADU roller pressure and release drive
15.3 Operation
15.3.1 Intermediate conveyance roller pressure and release mechanism
15.3.2 ADU roller pressure and release drive
15.3.3 Paper reverse control
15.3.4 ADU conveyance control
16. REVERSE AND EXIT SECTION
16.1 Configuration
16.2 Drive
16.2.1 Reverse and exit conveyance drive 1
16.2.2 Reverse and exit conveyance drive 2
16.2.3 Paper exit drive
16.3 Operation
16.3.1 Conveyance control
16.3.2 Reverse and exit timing control
16.3.3 Paper exit de-curler roller pressure control
16.3.4 Reverse de-curler roller pressure control
17. CHARGE CONTROL SECTION
17.1 Configuration
17.2 Drive
17.3 Operation
17.3.1 Conveyance control
17.3.2 Charging control
17.3.3 Fan control
17.3.4 Open close detection control
18. IMAGE STABILIZATION CONTROL
18.1 Outline
18.2 Long correction control
18.2.1 Outline
18.2.2 Automatic long correction control
18.2.3 Manual long correction control
18.2.4 Operation flow of the long correction control
18.2.5 Long correction control and color density control (periodical adjustment) with RU-509
18.3 Stabilization control between images
18.3.1 Outline
18.3.2 Dot diameter correction between images
18.4 Middle correction control
18.4.1 Outline
18.4.2 Automatic middle correction control
18.4.3 Middle correction for the measurement
18.4.4 Operation flow of the middle correction control
18.5 Other image stabilization controls
18.5.1 Color registration correction control
19. IMAGE PROCESSING SECTION
19.1 Image processing in the scanner section
19.1.1 Image processing flow in the scanner section
19.1.2 CCD sensor, CIS
19.1.3 A/D conversion
19.1.4 Shading correction, CIS correction
19.1.5 RGB gap correction
19.1.6 Chroma aberration correction
19.1.7 Color space conversion
19.1.8 Magnification processing in the main scan direction
19.1.9 Color conversion, character edge regeneration, color balance adjustment
19.1.10 Area discrimination
19.1.11 Image distinction
19.1.12 AE control
19.1.13 Reduction processing in the main and sub scan direction
19.2 Image processing in the write section
19.2.1 Image processing flow in the write section
19.2.2 DRAM (Local), DRAM (System), HDD
19.2.3 Color conversion, ACS process
19.2.4 Image compressing (Scanner)
19.2.5 Image expansion (Scanner)
19.2.6 Magnification processing in the sub scan direction
19.2.7 Cell average (Scanner)
19.2.8 Image compressing (IC-603)
19.2.9 Image enlargement (IC-603, IC-313, IC-415, IC-314)
19.2.10 Skeletonization/Outline letter emphasis
19.2.11 Outline emphasis
19.2.12 Smoothing
19.2.13 Toner amount save
19.2.14 Color sensor correction
19.2.15 IC-603 calibration correction (Standard)
19.2.16 Density balance
19.2.17 Gradation correction gamma
19.2.18 G7 calibration correction
19.2.19 Screen processing
19.2.20 2-dimensional position correction
19.2.21 Delay control between drums
19.2.22 PWM gamma
19.2.23 PWM conversion
19.2.24 Writing unit/Y, writing unit/M, writing unit/C, writing unit/K
20. POWER SOURCE SECTION
20.1 Operating parts with the connection of the power cord
20.1.1 Configuration
20.1.2 Operation
20.2 Operating parts when the main power switch (SW1) becomes active
20.2.1 Configuration
20.2.2 Operation
20.3 Operating parts when the sub power switch (SW2) becomes active
20.3.1 Configuration
20.3.2 Operation
20.4 Power cord
20.4.1 Configuration
20.5 Operating parts when the dehumidification heater switch (SW5) becomes active
20.5.1 Configuration
20.5.2 Operation
21. FAN SECTION
21.1 Configuration
21.2 Operation
21.2.1 Image processing cooling fan (FM1) control
21.2.2 Power supply cooling fan/1 (FM2) control
21.2.3 Power supply cooling fans/2 (FM3), power supply cooling fans/3 (FM4), power supply cooling fans/4 (FM5) control
O-107
21.2.4 Drum motor cooling fan/1 (FM6), drum motor cooling fan/2 (FM7) control
21.2.5 Fusing exhaust fan (FM8) control
21.2.6 Fusing belt exhaust fan (FM9) control
21.2.7 Fusing separation fan/1 (FM10), fusing separation fan/2 (FM11), fusing separation fan/3 (FM12) control
21.2.8 Fusing intake fan (FM13) control
21.2.9 Exhaust fan/Rr (FM14) abnormality
21.2.10 Exhaust fan/Fr (FM15) control
21.2.11 Transfer belt fan (FM17) control
21.2.12 PH cooling fan (FM18) control
21.2.13 Tacking fan/1 (FM19), Tacking fan/2 (FM20), Tacking fan/3 (FM21) control
21.2.14 Tacking fan/4 (FM35), Tacking fan/5 (FM36)
21.2.15 Cyclone exhaust fan (FM22) control
21.2.16 Paper exit cooling fan/1 (FM23), paper exit cooling fan/2 (FM25) control
21.2.17 ADU exhaust fan (FM24) control
21.2.18 Developing fan/1 (FM26), Developing fan/2 (FM27) and Developing fan/3 (FM28) control
21.2.19 ADU cooling fan (FM29) control
21.2.20 ADU reverse motor fan (FM30) control
21.2.21 Fusing roller cooling fans/1 (FM33) and Fusing roller cooling fans/2 (FM34) control
22. COUNTER SECTION
22.1 Configuration
22.2 Operation
23. ACS CONTROL
23.1 Switching from color mode to black and white mode
23.1.1 Outline
23.1.2 Sequence of switching from color mode to black and white mode
23.1.3 Sequence of switching from black and white mode to color mode
23.1.4 Timing of switching from color mode to black and white mode
23.2 Count at ACS
23.2.1 Black and white mode (1st transfer roller/Y, 1st transfer roller/M, 1st transfer roller/C released)
23.2.2 Color mode (1st transfer roller/Y, 1st transfer roller/M, 1st transfer roller/C, 1st transfer roller/K pressed)
24. IC-603/HDD/UPGRADE KIT (UK)
24.1 Configuration
24.2 Operation
24.2.1 Components of IC-603A (Option for C2070, C2060, C2060L)
24.2.2 Components of IC-603B (Option for C2070P)
24.2.3 HDD section components
24.2.4 Components of UK-104
24.2.5 Components of UK-214
25. AUTHENTICATION DEVICE
25.1 Authentication unit (IC card type: AU-201S)

PA THEORY OF OPERATION DF-706
1. OUTLINE
1.1 Unit configuration
1.2 Paper path
2. PAPER FEED SECTION
2.1 Configuration
2.2 Drive
2.3 Operation
2.3.1 Original set/empty detection
2.3.2 Original size detection mechanism
2.3.3 Up/down control for the document feed tray
2.3.4 Original take-up control
2.3.5 Double feed detection control
3. REGISTRATION SECTION
3.1 Configuration
3.2 Drive
3.3 Operation
3.3.1 Registration control
4. READ SECTION
4.1 Configuration
4.2 Drive
4.3 Operation
4.3.1 Reading transport control
4.3.2 Reading roller pressure/retraction control
4.3.3 DF original glass contamination prevention control
4.3.4 CIS original reading control
4.3.5 CIS control when power is turned ON
4.3.6 CIS control when the document is loaded
4.3.7 CIS control when the start key is pressed
4.3.8 CIS glass contamination prevention control
4.3.9 Opening and closing guide set detection
5. PAPER EXIT SECTION
5.1 Configuration
5.2 Drive
5.3 Operation
5.3.1 Document exit mechanism
6. OTHERS
6.1 Open and close detection section
6.1.1 DF angle open and close detection
6.1.2 DF open and close detection
6.2 Fan control
6.2.1 Function
6.2.2 Control condition

PB THEORY OF OPERATION PF-602m/HT-504/505
1. OUTLINE
1.1 Unit configuration
1.2 Paper path
2. PAPER FEED SUCTION SECTION
2.1 Configuration
2.2 Drive
2.2.1 Tray lift drive
2.2.2 Paper feed drive
2.2.3 Pick-up drive
2.3 Operation
2.3.1 Up down control
2.3.2 Size detection control
2.3.3 Pick-up mechanism
2.3.4 Separation mechanism
2.3.5 Air assist mechanism
2.3.6 Paper empty detection control
2.3.7 Remaining paper detection control
2.3.8 Tray lock control
3. CONVEYANCE SECTION
3.1 Configuration
3.2 Drive
3.3 Operation
3.3.1 Pre-registration control
3.3.2 Conveyance control
3.3.3 Multi feed detection control
4. OTHERS
4.1 Dehumidification heater control
4.2 Tray damper mechanism
4.3 Main body assist mechanism
4.3.1 Filter replacement assy retaining mechanism
4.3.2 Filter replacement assy ventilation mechanism
5. HT-504/505 (OPTIONAL)
5.1 Configuration
5.2 Operation
5.2.1 Dehumidifier fan heater control

PC THEORY OF OPERATION PF-707/HT-506
1. OUTLINE
1.1 UNIT CONFIGURATION
1.2 Paper path
2. PAPER FEED TRAY SECTION
2.1 Configuration
2.2 Drive
2.2.1 Tray lift drive
2.2.2 Side guide shutter drive
2.2.3 Paper leading edge shutter drive
2.2.4 Paper feed drive
2.3 Operation
2.3.1 Up down control
2.3.2 Size detection control
2.3.3 Air control
2.3.4 Paper empty detection control
2.3.5 Remaining paper detection control
2.3.6 Tray lock control
3. PAPER FEED SUCTION SECTION
3.1 Configuration
3.2 Drive
3.2.1 Paper feed drive
3.2.2 Paper feed suction drive
3.3 Operation
3.3.1 Suction control
3.3.2 Paper feed belt control
4. VERTICAL CONVEYANCE SECTION
4.1 Configuration
4.2 Drive
4.3 Operation
4.3.1 Vertical conveyance control
5. HORIZONTAL CONVEYANCE SECTION
5.1 Configuration
5.2 Drive
5.2.1 Horizontal conveyance drive
5.2.2 Horizontal conveyance roller pressure release drive
5.3 Operation
5.3.1 Pre-registration control
5.3.2 Horizontal conveyance control
5.3.3 Horizontal conveyance roller pressure release control
5.3.4 Multi-feed detection control
6. OTHERS
6.1 Internal heater control
6.2 Main body assist mechanism
6.2.1 Machine internal cooling mechanism
7. HT-506 (Option)
7.1 Configuration
7.2 Operation
7.2.1 Dehumidifier fan heater control

PD THEORY OF OPERATION LU-202m/LU-202XL/HT-503/HT-514
1. OUTLINE
1.1 Unit configuration
1.1.1 LU-202m
1.1.2 LU-202XL
1.2 Paper path
1.2.1 LU-202m
1.2.2 LU-202XL
2. PAPER FEED SECTION
2.1 Configuration
2.2 Drive
2.2.1 Paper feed drive
2.2.2 Pick-up drive
2.3 Operation
2.3.1 Paper feed control
2.3.2 Paper empty detection control
2.3.3 Remaining paper detection control
2.3.4 Size detection control
2.3.5 Multi-feed detection control (LU-202XL)
3. UP DOWN SECTION
3.1 Configuration
3.2 Drive
3.3 Operation
3.3.1 Up down control (LU-202m)
3.3.2 Up down control (LU-202XL)
4. OTHERS
4.1 Dehumidification heater control
4.2 Interlock switch control
5. HT-503/HT-514 (OPTIONAL)
5.1 Configuration (HT-503)
5.2 Configuration (HT-514)
5.3 Operation
5.3.1 Dehumidifier fan heater control
6. MK-746 (OPTIONAL)
6.1 Configuration
6.2 Outline

PE THEORY OF OPERATION MB-506
1. OUTLINE
1.1 Unit configuration
1.2 Paper path
2. PAPER FEED SECTION
2.1 Configuration
2.2 Drive
2.2.1 Paper feed drive
2.2.2 Up down drive
2.3 Operation
2.3.1 Up down control
2.3.2 Paper size detection control
2.3.3 Paper feed control
2.3.4 Paper empty control
2.3.5 Remaining paper detection control

PF THEORY OF OPERATION MK-744C
1. OUTLINE
1.1 Unit configuration
2. STATUS INDICATOR LIGHT SECTION
2.1 Configuration
2.2 Operation
2.2.1 Lighting control
2.2.2 Connection specification

PG THEORY OF OPERATION OT-510
1. OUTLINE
1.1 Unit configration
1.2 Paper path
2. PAPER CONVEYANCE SECTION
2.1 Configuration
2.2 Drive
2.3 Operation
2.3.1 Line speed switch control
3. MAIN TRAY SECTION
3.1 Configuration
3.2 Drive
3.2.1 Main tray up-down drive
3.2.2 Paper exit roller/paper exit opening drive
3.2.3 Gripper/paper exit pressure drive
3.2.4 Paper exit alignment plate drive
3.2.5 Main tray shift drive
3.3 Operation
3.3.1 Paper exit opening control
3.3.2 Gripper control
3.3.3 Paper pressure control
3.3.4 Main tray up/down control
3.3.5 Paper exit alignment control
3.3.6 Main tray shift control

PH THEORY OF OPERATION OT-511
1. OUTLINE
1.1 Unit configuration
1.2 Paper path
2. CONVEYANCE SECTION
2.1 Configuration
2.2 Drive
2.3 Operation
2.3.1 Conveyance control
2.3.2 Paper exit full detection control
3. CONVEYANCE DOOR SECTION
3.1 Configuration
3.2 Operation
3.2.1 Conveyance door open and close control

PI THEORY OF OPERATION EF-103
1. OUTLINE
1.1 Way to distinguish the fusing unit between C2070, C2070P, C2060 and EF-103
1.2 Unit configuration
1.3 Paper path
2. FUSING SECTION
2.1 Configuration
2.2 Drive
2.2.1 Fusing roller drive
2.2.2 Fusing pressure release drive
2.2.3 Fusing swing drive
2.3 Operation
2.3.1 Fusing roller drive control
2.3.2 Pressure release control
2.3.3 Fusing temperature control
2.3.4 Malfunction protection
2.3.5 Fusing roller/Lw cooling control
2.3.6 Fusing recovery control
2.3.7 Fusing air separation control
2.3.8 Fusing swing control
3. PAPER FEED ASSIST SECTION
3.1 Configuration
3.2 Operation

PJ THEORY OF OPERATION MK-740
1. Outline
1.1 Unit configuration
1.2 Paper path
1.2.1 Paper path of Main Body + MB-506 + OT-511 + MK-740
1.2.2 Paper path of Main Body + LU-202XL + OT-511 + MK-740
1.2.3 Paper path of Main Body + MB-531 + FS-531/612 + MK-740
1.2.4 Paper path of Main Body + MB-506 + LU-202XL + FS-532/OT-510 + MK-740

PK THEORY OF OPERATION RU-509/HM-102
1. OUTLINE
1.1 Unit configuration
1.2 Paper path
1.2.1 Straight conveyance/de-curler conveyance/humidification conveyance mode
2. ENTRANCE CONVEYANCE SECTION
2.1 Configuration
2.2 Drive
2.2.1 Conveyance drive
2.2.2 Humidification section gate drive
2.3 Operation
2.3.1 Conveyance control
2.3.2 Humidification section gate control
3. DE-CURLER SECTION
3.1 Configuration
3.2 Drive
3.2.1 De-curler section conveyance drive
3.2.2 De-curler gate/1 and /2 drive
3.2.3 De-curler/3 and /4 pressure drive
3.3 Operation
3.3.1 Outline of de-curler
3.3.2 De-curler section conveyance control
3.3.3 De-curler/1 and /2 control
3.3.4 De-curler/3 and /4 control
4. OUTPUT PAPER DENSITY DETECTION SECTION
4.1 Configuration
4.2 Drive
4.2.1 Conveyance drive
4.2.2 Shutter drive
4.3 Operation
4.3.1 Outline
4.3.2 Output paper density detection section
5. PAPER EXIT SECTION
5.1 Configuration
5.2 Drive
5.2.1 Paper exit conveyance drive
5.3 Operation
5.3.1 Paper exit conveyance control
6. HUMIDIFICATION SECTION (HM-102)
6.1 Configuration
6.2 Drive
6.2.1 Humidification section entrance conveyance drive
6.2.2 Humidification section conveyance drive
6.2.3 Humidification roller pressure drive (HM-102)
6.2.4 Water feed pump drive
6.3 Operation
6.3.1 Outline of humidification section
6.3.2 Humidification section conveyance control
6.3.3 Humidification roller / water feed roller pressure control
6.3.4 Water feed control
7. OTHER CONTROLS
7.1 Fan control
7.1.1 Configuration
7.1.2 Control
7.2 Door detection control

PL THEORY OF OPERATION RU-510
1. OUTLINE
1.1 Unit configuration
1.2 PAPER PATH
1.2.1 Straight conveyance
1.2.2 Reverse exit conveyance
2. CONVEYANCE SECTION
2.1 Configuration
2.2 Drive
2.2.1 Conveyance drive
2.2.2 Straight gate drive
2.3 Operation
2.3.1 Conveyance path switching control
2.3.2 Paper feed mechanism
2.3.3 Line speed switch control
2.3.4 Conveyance control
3. STACKER SECTION
3.1 Configuration
3.2 Drive
3.2.1 Assist guide drive
3.2.2 CD alignment drive
3.2.3 FD alignment drive
3.3 Operation
3.3.1 Conveyance path switching control
3.3.2 Horizontal alignment control
3.3.3 Vertical alignment control
3.3.4 Reverse exit control
3.3.5 Stack assist fan control

PM THEORY OF OPERATION FS-531
1. OUTLINE
1.1 Unit configuration
1.2 Paper path
1.2.1 None sort/sort/group mode
1.2.2 Sub tray mode
1.2.3 Staple mode
2. CONVEYANCE SECTION
2.1 Configuration
2.2 Drive
2.3 Operation
2.3.1 Punch registration control (Only when PK is installed)
2.3.2 FS conveyance control
2.3.3 Gate drive control
2.3.4 Bypass gate control
2.3.5 Shift control
2.3.6 Paper exit roller control
2.3.7 Paper exit opening solenoid control
2.3.8 Paper exit opening control
2.3.9 Sub tray paper exit control
3. MAIN TRAY SECTION
3.1 Configuration
3.2 Drive
3.3 Operation
3.3.1 Tray up down control
4. STACKER SECTION
4.1 Configuration
4.2 Drive
4.3 Operation
4.3.1 Alignment control
4.3.2 Stopper control
4.3.3 Stacker entrance conveyance control
4.3.4 Stacker paper exit control
5. STAPLER SECTION
5.1 Configuration
5.2 Drive
5.3 Operation
5.3.1 Stapler movement control
5.3.2 Stapler control

PN THEORY OF OPERATION FS-612
1. OUTLINE
1.1 Unit configuration
1.2 Paper path
1.2.1 None sort/sort/group mode
1.2.2 Sub tray mode
1.2.3 Staple mode
1.2.4 Center folding/saddle stitching mode
1.2.5 Tri-folding mode
2. CONVEYANCE SECTION
2.1 Configuration
2.2 Drive
2.3 Operation
2.3.1 Punch registration control (Only when PK is installed)
2.3.2 FS conveyance control
2.3.3 Gate drive control
2.3.4 Bypass gate control
2.3.5 Shift control
2.3.6 Paper exit roller control
2.3.7 Paper exit opening solenoid control
2.3.8 Paper exit opening control
2.3.9 Sub tray paper exit control
3. MAIN TRAY SECTION
3.1 Configuration
3.2 Drive
3.3 Operation
3.3.1 Tray up down control
4. STACKER SECTION
4.1 Configuration
4.2 Drive
4.3 Operation
4.3.1 Alignment/Up control
4.3.2 Alignment/Lw control
4.3.3 Stopper control
4.3.4 Stacker entrance conveyance control
4.3.5 Stacker paper exit control
5. STAPLER SECTION
5.1 Configuration
5.2 Drive
5.3 Operation
5.3.1 Stapler movement control
5.3.2 Stapler control
6. HALF-FOLDING/SADDLE-STITCHING/TRI-FOLDING SECTION
6.1 Configuration
6.2 Drive
6.3 Operation
6.3.1 Folding knife control
6.3.2 Folding conveyance control
6.3.3 Tri-folding gate control

PO THEORY OF OPERATION PK-512/513
1. OUTLINE
1.1 Unit configuration
1.2 Paper path
2. PUNCH SECTION
2.1 Composition
2.2 Drive
2.2.1 Punch shift drive
2.2.2 Punch drive
2.3 Operation
2.3.1 Punch standby position movement control
2.3.2 Punch position correction control
2.3.3 Punch control
3. PUNCH SCRAPS BOX SECTION
3.1 Composition
3.2 Drive
3.3 Operation
3.3.1 Punch scraps box control

PP THEORY OF OPERATION PI-502
1. OUTLINE
1.1 Unit configuration
1.2 Paper path
1.2.1 Automatic sheet feed (Online operation)
1.2.2 Manual sheet feed (Offline operation)
2. PAPER FEED SECTION
2.1 Configuration
2.2 Drive
2.2.1 Paper feed drive
2.2.2 Tray lift drive
2.3 Operation
2.3.1 Tray lift mechanism
2.3.2 Pick-up mechanism
2.3.3 Separation mechanism
2.3.4 Registration control
2.3.5 Paper size detection control

PQ THEORY OF OPERATION FS-532
1. UNIT CONFIGURATION
2. PAPER PATH
3. PAPER CONVEYANCE SECTION
3.1 Configuration
3.2 Drive
3.2.1 FNS entrance roller drive/conveyance gate drive
3.2.2 Bypass conveyance roller/stacker entrance roller drive
3.2.3 Sub tray conveyance roller/PK exit roller/stacker conveyance roller drive
3.2.4 Sub tray exit roller/horizontal conveyance roller drive
3.2.5 Bypass gate drive
3.3 Operation
3.3.1 Line speed switch control
3.3.2 Conveyance path switching control
4. SUB TRAY SECTION
4.1 Configuration
4.2 Drive
4.3 Operation
4.3.1 Sub tray paper exit control
4.3.2 Sub tray paper full detection control
5. STACKER SECTION
5.1 Configuration
5.2 Drive
5.2.1 Stacker entrance roller pressure release drive
5.2.2 Rewind paddle pressure release/rewind paddle drive
5.2.3 Stack assist plate drive
5.2.4 Alignment plate/rear stopper drive/bundle exit claw drive
5.2.5 Paper pressure drive
5.3 Operation
5.3.1 Paper overlap control
5.3.2 Stacker entrance roller pressure release control
5.3.3 Stack assist control
5.3.4 Paper stopper control
5.3.5 Rear stopper position control
5.3.6 Paper pressure control
5.3.7 Horizontal alignment control
5.3.8 Vertical alignment control
5.3.9 Small-size paper exit auxiliary control
6. STAPLER SECTION
6.1 Configuration
6.2 Drive
6.2.1 Stapler movement/rotation control
6.3 Operation
6.3.1 Stapler movement control
6.3.2 Staple control
7. MAIN TRAY SECTION
7.1 Configuration
7.2 Drive
7.2.1 Main tray up-down drive
7.2.2 Paper exit roller/paper exit opening drive
7.2.3 Gripper/paper exit pressure drive
7.2.4 Paper exit alignment plate drive
7.2.5 Main tray shift drive
7.3 Operation
7.3.1 Paper exit opening control
7.3.2 Gripper control
7.3.3 Paper pressure control
7.3.4 Main tray up/down control
7.3.5 Paper exit alignment control
7.3.6 Main tray shift control

PR THEORY OF OPERATION SD-510
1. UNIT CONFIGURATION
2. PAPER PATH
2.1 Half-folding/saddle stitching
2.2 Tri-folding
3. PAPER CONVEYANCE SECTION
3.1 Configuration
3.2 Drive
3.3 Operation
3.3.1 SD entrance conveyance
4. ALIGNMENT SECTION
4.1 Configuration
4.2 Drive
4.2.1 Paddle/Md drive
4.2.2 Rear stopper/rear gripper drive
4.2.3 Paddle/Lw drive
4.2.4 Alignment Plate drive
4.3 Operation
4.3.1 Paper stopper control mechanism
4.3.2 Rear stopper mechanism
4.3.3 Alignment mechanism
4.3.4 Alignment control
5. STAPLER SECTION
5.1 Configuration
5.2 Drive
5.3 Operation
5.3.1 Stapler movement control
5.3.2 Staple control
6. HALF-FOLD/FOLD&STAPLE/TRI-FOLDING SECTION
6.1 Configuration
6.2 Drive
6.2.1 Folding roller drive
6.2.2 1st Fold knife drive
6.2.3 2nd folding knife drive
6.2.4 2nd Fold gate drive
6.3 Operation
6.3.1 1st folding knife control
6.3.2 Half-folding/saddle stitching conveyance control
6.3.3 2nd folding gate control
6.3.4 2nd Folding knife control
6.3.5 Tri-folding conveyance control
7. PAPER EXIT SECTION
7.1 Configuration
7.2 Drive
7.3 Operation
7.3.1 Paper exit control
7.3.2 Output tray lift up control

PS THEORY OF OPERATION PK-522
1. OUTLINE
1.1 Unit configuration
1.2 PAPER PATH
2. PUNCH SECTION
2.1 Configuration
2.2 Drive
2.2.1 Punch shift drive
2.2.2 Punch drive
2.3 Operation
2.3.1 Punch ready position movement control
2.3.2 Punch position correction control
2.3.3 Punch control
3. PUNCH-HOLE SCRAPS BOX SECTION
3.1 Configuration
3.2 Drive
3.3 Operation
3.3.1 Punch scraps dropping
3.3.2 Punch scraps box control

PT THEORY OF OPERATION MK-732
1. OUTLINE
1.1 Unit configuration
1.2 PAPER PATH
2. CONVEYANCE SECTION
2.1 Configuration
2.2 Drive
2.2.1 Conveyance drive
2.3 Operation
2.3.1 Conveyance control
PU THEORY OF OPERATION LS-506
1. OUTLINE
1.1 Unit configuration
1.2 Paper path
2. COUPLING CONVEYANCE SECTION
2.1 Configuration
2.2 Drive
2.3 Operation
2.3.1 Door open/close mechanism
2.3.2 Jam release lever lock mechanism
3. ENTRANCE CONVEYANCE SECTION
3.1 Configuration
3.2 Drive
3.3 Operation
3.3.1 Path switching
3.3.2 Conveyance line speed control
3.3.3 Paper cooling mechanism
4. CONVEYANCE SECTION
4.1 Configuration
4.2 Drive
4.2.1 Entrance conveyance drive
4.2.2 Stacker tray conveyance drive (M3 reverse)
4.2.3 Sub tray conveyance drive (M3 forward)
4.2.4 Coupling conveyance/grip belt/paper press arm drive
4.2.5 Stacker tray up down drive
4.2.6 Shift unit/alignment plate drive
4.2.7 Rear stopper/job partition plate drive
4.2.8 Front stopper/paper press arm drive
4.3 Operation
4.3.1 Stacker tray conveyance
4.3.2 Coupling conveyance
4.3.3 Sub tray conveyance

PV THEORY OF OPERATION FD-503
1. OUTLINE
1.1 Unit configuration
1.2 Paper path
(1) Straight mode
(2) Sub tray mode
(3) Punch mode (L and S sizes)
(4) Z-Fold mode
(5) Letter fold-out mode
(6) Tri-Fold-in/double parallel mode
(7) Gate fold mode
(8) Half-fold mode
2. CONVEYANCE SECTION
2.1 Configuration
2.2 Drive
2.2.1 Conveyance drive
2.2.2 Gate drive
2.2.3 Alignment drive
2.3 Operation
2.3.1 Conveyance path switching
2.3.2 Conveyance line speed control
2.3.3 Alignment control
2.3.4 Gap recovery control
3. PUNCH SECTION
3.1 Configuration
3.2 Drive
3.2.1 Rear registration drive
3.2.2 Punch drive
3.3 Operation
(1) Punch control
(2) Punch hole switching control
(3) Punch-hole scraps box control
4. FOLDING CONVEYANCE SECTION
4.1 Configuration
4.2 Drive
4.2.1 Conveyance drive
4.2.2 Folding drive
4.3 Operation
4.3.1 Registration control
4.3.2 Conveyance path switching
4.3.3 1st folding control
4.3.4 2nd folding control
4.3.5 3rd folding control
5. MAIN TRAY SECTION
5.1 Configuration
5.2 Drive
5.3 Operation
5.3.1 Main tray up down control
6. SUB TRAY SECTION
6.1 Configuration
6.2 Drive
6.3 Operation
6.3.1 Sub tray full-status detection control
6.3.2 Line speed switching
7. PI SECTION
7.1 Configuration
7.2 Drive
7.2.1 Tray lift drive
7.2.2 Paper feed drive
7.2.3 Pick-up drive
7.3 Operation
7.3.1 Size detection control
7.3.2 Up down control
7.3.3 Pick-up mechanism
7.3.4 Separation mechanism
7.3.5 Multi feed detection control
7.3.6 Paper empty detection control

PW THEORY OF OPERATION SD-506
1. OUTLINE
1.1 Unit configuration
1.2 Paper path
(1) Coupling exit/sub tray exit mode
(2) Overlap tri-folding mode
(3) Center folding/saddle stitching mode
2. HORIZONTAL CONVEYANCE SECTION
2.1 Configuration
2.2 Drive
2.2.1 Entrance conveyance drive
2.2.2 Horizontal conveyance drive
2.2.3 Gate drive/sub tray pressure release drive
2.3 Operation
2.3.1 Conveyance path switching control
2.3.2 Conveyance line speed switch control
2.3.3 Sub tray paper exit control
2.3.4 Sub tray paper full detection control
3. RIGHT ANGLE CONVEYANCE SECTION
3.1 Configuration
3.2 Drive
3.2.1 Right angle conveyance drive/alignment drive
3.2.2 Overlap drive
3.3 Operation
3.3.1 Paper overlap control
3.3.2 Alignment control
3.3.3 Right angle conveyance control
4. FOLDING SECTION
4.1 Configuration
4.2 Drive
4.2.1 Folding entrance drive
4.2.2 Folding conveyance drive
4.2.3 Folding blade drive
4.2.4 Folding main scan alignment drive
4.2.5 Folding sub scan alignment/center folding exit drive
4.2.6 Guide shaft drive
4.3 Operation
4.3.1 Folding entrance conveyance control
4.3.2 Folding main scan alignment control
4.3.3 Folding control
4.3.4 Folding sub scan alignment control
4.3.5 Guide shaft control
5. SADDLE STITCHING SECTION
5.1 Configuration
5.2 Drive
5.2.1 Saddle stitching alignment drive
5.2.2 Saddle stitching hold drive
5.2.3 Clincher up down drive
5.2.4 Stapler/clincher movement drive
5.2.5 Stapler/clincher drive
5.2.6 Bundle arm rotation drive
5.2.7 Bundle arm movement drive
5.2.8 Bundle arm assist drive
5.2.9 Bundle clip drive
5.3 Operation
5.3.1 Saddle stitching alignment control
5.3.2 Stapler/clincher movement control
5.3.3 Saddle stitching hold control
5.3.4 Clincher up down control
5.3.5 Stapler control
5.3.6 Bundle arm control
5.3.7 Bundle arm assist control
5.3.8 Bundle clip control
6. BUNDLE PROCESSING SECTION
6.1 Configuration
6.2 Drive
6.2.1 Bundle press stage lift drive
6.2.2 Bundle press movement drive
6.2.3 Bundle registration drive
6.2.4 Bundle press drive
6.2.5 Bundle exit drive
6.3 Operation
6.3.1 Bundle press stage up down control
6.3.2 Bundle press movement control
6.3.3 Bundle press control
6.3.4 Bundle registration control
6.3.5 Bundle exit control
7. TRIMMER SECTION
7.1 Configuration
7.2 Drive
7.2.1 Trimmer press drive
7.2.2 Trimmer blade drive
7.2.3 Trimmer board drive
7.2.4 Paddle drive
7.3 Operation
7.3.1 Trimmer press control
7.3.2 Trimmer blade control
7.3.3 Trimmer board control
7.3.4 Trimmer paddle control

PX THEORY OF OPERATION SD-513
1. Unit configuration
1.1 Entire system
1.2 Rear console
1.3 Front console
2. Paper path
2.1 Straight mode, sub tray mode
2.2 Overlap tri-folding mode
2.3 Multi half-fold mode, fold & staple and trimming mode
2.3.1 Conveyance path of the rear console
2.3.2 Conveyance path from the rear console to the front console
2.3.3 Conveyance path of the front console
3. ENTRANCE CONVEYANCE SECTION
3.1 Configuration
3.2 Drive
3.2.1 Entrance gate drive
3.2.2 Reverse/exit gate drive
3.2.3 Entrance conveyance drive
3.2.4 Reverse exit drive, reverse exit roller pressure release drive
3.2.5 Paper re-feed drive, paper re-feed roller pressure release drive
3.2.6 CD alignment plate drive
3.2.7 Front stopper drive
3.3 Operation
3.3.1 Conveyance path switching control
3.3.2 Line speed switch control
3.3.3 Overlap conveyance control
3.3.4 Reverse exit roller pressure release control
3.3.5 Stack assist control
3.3.6 Alignment control
3.3.7 Paper re-feed roller pressure release control
4. FOLDING CONVEYANCE SECTION
4.1 Configuration
4.2 Drive
4.2.1 Horizontal conveyance drive/1
4.2.2 Sub tray gate drive
4.2.3 Horizontal conveyance drive/2
4.2.4 Horizontal conveyance pressure release drive/1
4.2.5 Horizontal conveyance pressure release drive/2
4.2.6 1st folding stopper drive
4.2.7 1st folding FD alignment drive
4.2.8 Folding roller drive, tri-folding conveyance drive
4.2.9 1st folding knife drive
4.2.10 2nd folding knife drive
4.2.11 Folding roller guide drive
4.2.12 Half-folding conveyance drive
4.3 Operation
4.3.1 Conveyance path switching control
4.3.2 Horizontal conveyance control
4.3.3 Horizontal conveyance pressure release control
4.3.4 Vertical alignment control
4.3.5 1st Fold knife control
4.3.6 Folding control
4.3.7 2nd Folding knife control
4.3.8 Half-folding conveyance control
5. SUB TRAY, TRI-FOLDING TRAY SECTION
5.1 Configuration
5.2 Drive
5.2.1 Sub tray, tri-folding tray paper exit drive
5.2.2 Tri-folding paper exit gate drive
5.3 Operation
5.3.1 Conveyance path switching control
5.3.2 Sub tray, tri-folding tray paper exit control
5.3.3 Sub tray paper, tri-folding tray paper full detection control
6. SADDLE STITCHING SECTION
6.1 Configuration
6.2 Drive
6.2.1 Saddle stitching alignment drive/Rr
6.2.2 Saddle stitching alignment drive/Md
6.2.3 Saddle stitching alignment plate release drive
6.2.4 Saddle stitching alignment drive/Fr
6.2.5 Booklet holding drive
6.2.6 Stapler head drive
6.3 Operation
6.3.1 Saddle stitching alignment control
6.3.2 Stapler movement control
6.3.3 Booklet holding control
6.3.4 Stapler control
7. BOOKLET MOVEMENT SECTION
7.1 Configuration
7.2 Drive
7.2.1 Booklet holding unit drive
7.2.2 Booklet holding drive
7.2.3 Booklet set drive
7.2.4 Book movement drive
7.3 Operation
7.3.1 Booklet holding control
7.3.2 Booklet movement control
8. CLAMP SECTION
8.1 Configuration
8.2 Drive
8.2.1 Clamp up down drive
8.2.2 Clamp/Lt drive
8.2.3 Clamp/Rt drive
8.2.4 Lifter plate drive
8.2.5 Lifter plate up down drive
8.2.6 Fore edge stopper drive
8.2.7 Fore edge finger drive
8.2.8 Trimmer booklet holding drive
8.3 Operation
8.3.1 Clamp control
8.3.2 Lifter control
8.3.3 Fore edge stopper control
8.3.4 Trimmer booklet holding control
8.3.5 Front console lock control
9. TRIMMER SECTION
9.1 Configuration
9.2 Drive
9.2.1 Trimmer press drive
9.2.2 Trimmer brake drive
9.2.3 Trimmer blade drive
9.2.4 Trimmer board drive
9.2.5 Trimmer paddle drive
9.3 Operation
9.3.1 Trimmer press control
9.3.2 Trimmer blade control
9.3.3 Trimmer board control
9.3.4 Trimmer paddle control
9.3.5 Trimmer shutter control
9.3.6 Trimmer scraps box full detection control
10. BOOKLET TRAY SECTION
10.1 Configuration
10.2 Drive
10.2.1 Grip roller pressure drive
10.2.2 Grip roller rotation drive
10.2.3 Booklet tray paper exit drive
10.2.4 Paper exit belt drive
10.3 Operation
10.3.1 Grip roller control
10.3.2 Booklet tray paper exit control
10.3.3 Paper exit belt control
10.3.4 Paper exit shutter control
10.3.5 Booklet tray paper full detection control

PY THEORY OF OPERATION CR-101
1. OUTLINE
1.1 Unit configuration
1.2 Paper path
2. CREASER SECTION
2.1 Configuration
2.2 Drive
2.2.1 Creaser drive
2.3 Operation
2.3.1 Paper conveyance control
2.3.2 Paper alignment control
2.3.3 Creaser control
PZ THEORY OF OPERATION TU-503
1. OUTLINE
1.1 Unit configuration
1.2 Paper path
2. CONVEYANCE SECTION
2.1 Configuration
2.2 Drive
2.2.1 Conveyance gate drive
2.2.2 Conveyance drive
2.3 Operation
2.3.1 Gate open close control
2.3.2 Registration control
3. SLITTER SECTION
3.1 Configuration
3.2 Drive
3.2.1 Slitter position shift drive
3.2.2 Slit cutter drive
3.3 Operation
3.3.1 Trimmer control
4. ROTARY CUTTER SECTION
4.1 Configuration
4.2 Drive
4.2.1 Slit scraps trimmer drive
4.3 Operation
4.3.1 Slit scraps trimmer control
4.3.2 Slitter shutter control
5. SLIT SCRAPS BOX SECTION
5.1 Configuration
5.2 Operation
5.2.1 Slit scraps box set detection control
5.2.2 Slit scraps box full detection control

PAA THEORY OF OPERATION FD-504
1. OUTLINE
1.1 Unit configuration
1.2 Paper path
2. CLAMP UP DOWN SECTION
2.1 Configuration
2.2 Drive
2.2.1 FD clamp up and down drive
2.3 Operation
2.3.1 FD clamp up and down control
3. CLAMP SECTION
3.1 Configuration
3.2 Drive
3.2.1 FD clamp drive
3.3 Operation
3.3.1 FD clamp control
4. SPINE CORNER FORMING SECTION
4.1 Configuration
4.2 Drive
4.2.1 Spine corner forming drive
4.3 Operation
4.3.1 Spine corner forming control

PAB THEORY OF OPERATION PB-503
1. OUTLINE
1.1 Unit configuration
1.2 Paper path
1.2.1 Sub tray exit
1.2.2 Perfect binding mode
1.2.3 Relay conveyance mode
2. CONVEYANCE SECTION
2.1 Configuration
2.2 Drive
2.2.1 Entrance conveyance drive/Intermediate conveyance drive/Cover paper conveyance drive
2.2.2 Entrance gate drive/Bypass gate drive/Sub tray gate drive/Sub tray exit and separation drive
2.3 Operation
2.3.1 Gate control
2.3.2 Entrance conveyance control
2.3.3 Intermediate conveyance control
2.3.4 Cover paper conveyance control
2.3.5 Sub tray paper exit release control
2.3.6 Sub tray full-status detection control
2.3.7 Cover paper multi feed detection control
3. SUB COMPILE (SC) SECTION
3.1 Configuration
3.2 Drive
3.2.1 SC entrance conveyance drive/Switchback conveyance drive/Paper bundle conveyance drive
3.2.2 Switchback release drive
3.2.3 SC roller release drive/Clamp entrance release drive
3.2.4 Clamp entrance movement drive
3.2.5 SC main scan alignment drive
3.2.6 Sub scan alignment drive
3.2.7 SC stopper drive/SC pressure arm drive/Straight gate drive
3.3 Operation
3.3.1 SC section operation overview
3.3.2 Gate control of the relay conveyance
3.3.3 SC entrance conveyance control
3.3.4 SC switchback conveyance control
3.3.5 SC main scan alignment control
3.3.6 Sub scan alignment control
3.3.7 SC paper bundle conveyance control
3.3.8 Clamp entrance movement control
3.3.9 SC stopper control
3.3.10 SC pressure arm control
4. CLAMP SECTION
4.1 Configuration
4.2 Drive
4.2.1 Clamp drive
4.2.2 Clamp rotation drive
4.2.3 Clamp alignment drive
4.3 Operation
4.3.1 Clamp alignment control
4.3.2 Clamp control
4.3.3 Clamp rotation control
4.3.4 Book thickness detection control
5. PELLET SUPPLY SECTION
5.1 Configuration
5.2 Drive
5.2.1 Pellet supply drive
5.2.2 Pellet supply arm drive
5.3 Operation
5.3.1 Pellet supply operation overview
5.3.2 Pellet supply arm control
5.3.3 Pellet supply amount control
5.3.4 Pellet remaining amount detection control
5.3.5 Pellet supply door opening and closing detection control
6. GLUE TANK SECTION
6.1 Configuration
6.2 Drive
6.2.1 Drive
6.2.2 Glue apply roller drive
6.2.3 Tank up drive
6.2.4 Cover paper glue lifting drive
6.3 Operation
6.3.1 Glue tank unit movement control
6.3.2 Glue apply roller control
6.3.3 Glue tank lifting control
6.3.4 Cover paper glue control
6.3.5 Glue temperature control
7. COVER PAPER SUPPLY SECTION
7.1 Configuration
7.2 Drive
7.2.1 Cover paper tray lift drive
7.2.2 Paper feed drive
7.2.3 Pick-up drive
7.3 Operation
7.3.1 Up down control
7.3.2 Pick-up mechanism
7.3.3 Separation mechanism
7.3.4 Paper feed mechanism
7.3.5 Air assist mechanism
7.3.6 Cover paper empty detection control
7.3.7 Paper feed assist plate
8. COVER PAPER TABLE SECTION
8.1 Configuration
8.2 Drive
8.2.1 Cover paper table up down/Fr and /Rr drive
8.2.2 Cover paper alignment drive
8.2.3 Cover paper conveyance drive
8.2.4 Book exit drive
8.2.5 Cover paper folding plate/Rt and /Lt drive
8.2.6 Cover paper conveyance arm/Rr and /Lt drive
8.2.7 Cover paper lift drive
8.2.8 Cutter drive
8.3 Operation
8.3.1 Cover paper table section operation overview
8.3.2 Cover paper conveyance control
8.3.3 Cover paper trimming control
8.3.4 Cover paper alignment drive
8.3.5 Cover paper table up down control
8.3.6 Cover paper folding plate control
8.3.7 Cover paper conveyance arm control
8.3.8 Cover paper lifting (supporting) control
8.3.9 Book paper exit control
8.3.10 Waste paper control
9. BOOK STOCK SECTION
9.1 Configuration
9.2 Drive
9.2.1 Book conveyance drive
9.2.2 Book conveyance belt drive
9.2.3 Book conveyance up down drive
9.2.4 Book movement drive
9.2.5 Book stopper drive
9.3 Operation
9.3.1 Book stock section operation overview
9.3.2 Book conveyance and movement control
9.3.3 Book conveyance belt control
9.3.4 Book conveyance up down control
9.3.5 Book movement control
9.3.6 Book stopper control
9.3.7 Book full status detection control
10. RELAY CONVEYANCE SECTION
10.1 Configuration
10.2 Drive
10.2.1 Relay conveyance roller drive / Relay paper exit roller drive
10.3 Operation
10.3.1 Relay conveyance control
11. OTHERS
11.1 Fan control
11.1.1
11.2 Door opening and closing control

PAC THEORY OF OPERATION GP-501
1. PREFACE
1.1 INTRODUCTION
1.1.1 Setting the Right Expectations
1.2 PRODUCT POSITIONING
1.3 LONG EDGE FEED (LEF) ONLY
2. OUTLINE
2.1 Unit configuration diagram
2.2 Paper path
3. CONVEYANCE SECTION
3.1 Configuration
4. PRINCIPLE OF OPERATION
4.1 Punch conveyance control
4.2 Punch operation
4.3 Chip tray control
4.4 Bypass conveyance control
5. PUNCH MODULE
5.1 Tools Required
5.2 Procedure

PAD THEORY OF OPERATION GP-502
1. THEORY OF OPERATION

Q) IMAGE POSITION ADJUSTMENT
1. UNDERSTANDING THE CHARACTER OF THE PAPER
1.1 The shrinkage of the paper
1.2 The dimensional accuracy of the paper
1.3 Precautions on supplying papers
2. BASIC OPERATION
2.1 Both sides adjustment (Preparation)
2.1.1 Preparation for papers
2.1.2 About the adjustment procedure
2.2 Both sides adjustment (Mechanical adjustment and Software adjustment)
2.2.1 Skew mechanical adjustment (In the sub scan direction)
2.2.2 Skew adjustment (In the main scan direction)
2.2.3 Skew mechanical adjustment (main scan)
2.3 Both sides adjustment (Software adjustment)
2.3.1 Belt line speed adjustment
2.3.2 Restart timing adjustment (Side2) rough adjustment
2.3.3 CD-Mag. adjustment (Side2)
2.3.4 Centering auto adjustment
2.3.5 Centering sensor gap adjustment
2.3.6 Both sides adjustment
2.4 About the Both Sides Adj
2.4.1 About the adjustment procedure of the [12. Adjustment] – [Both Sides Adjust] in User’s Guide”
2.4.2 About the adjustment procedure of the [12. Adjustment] – [Machine Adjustment] in “User’s Guide”
2.5 About the line speed adjustment
3. ADVANCED OPERATION
3.1 When the mis-centering unexpectedly occurs
3.1.1 Checkpoint
3.1.2 Centering
3.1.3 Curve (Tilt)
3.1.4 The trouble with the paper conveyance timing
3.2 When the particular paper is curved
3.2.1 Paper types that are easily skewed
3.2.2 Checkpoint and handling
3.3 When the mis-centering is excessive
3.3.1 Checkpoint and handling

R) COLOR ADJUSTMENT
1. COMBINATION OF EXECUTION TIMING AND ITEMS
1.1 When IC-603 is connected
1.2 When IC-313 or IC-417 is connected
1.3 When IC-314 is connected
2. QUALITY ADJUSTMENT
2.1 Select screen
2.1.1 Execution timing
2.1.2 Procedure
2.2 Gamma Automatic Adjustment
2.2.1 Execution timing
2.2.2 Procedure
2.3 Density Balance Adjustment
2.3.1 Execution timing
2.3.2 Procedure (when the scanner is installed)
2.3.3 Procedure (when the scanner is not installed)
2.4 Max Density Initial Adj
2.4.1 Execution timing
2.4.2 Adjustment target value (reference)
2.4.3 Preparation
2.4.4 Procedure for the setup or the update of the target value for the density management
2.4.5 Procedure for maintenance
2.4.6 Measure the density with the spectrophotometer
2.5 Max. Density Auto Adj. (RU)
2.5.1 Execution timing
2.5.2 Procedure
2.6 Maximum Density Adjustment
2.6.1 Execution timing
2.6.2 Step
2.7 Color Density Control Setting
2.7.1 Execution timing
2.7.2 Step
2.8 Color Density Control (Manual adjustment)
2.8.1 Execution timing
2.8.2 Step
2.9 IC-603 Calibration
2.9.1 Execution timing
2.9.2 Procedure (for i1Pro/i1Pro2/ES-1000/ES-2000, or FD-5BT)
2.10 Exact Color
2.10.1 Execution timing
2.10.2 Procedure (For i1Pro/i1Pro2/ES-1000/ES-2000 or FD-5BT)
2.11 G7 Calibration
2.11.1 Execution timing
2.11.2 Procedure (For i1Pro/i1Pro2/ES-1000/ES-2000 or FD-5BT)
2.12 IC-313/IC-417 Calibration
2.12.1 Execution timing
2.12.2 Procedure (for i1Pro/i1Pro2/ES-1000/ES-2000)
2.13 IC-314 Calibration
2.13.1 Execution timing
2.13.2 Procedure
2.14 IDC Sensor Adjustment
2.14.1 Execution timing
2.14.2 Procedure
2.15 Highlight Automatic Adj
2.15.1 Execution timing
2.15.2 Procedure

S) TROUBLESHOOTING GUIDE Ver1.0 (REPORTS FROM THE MARKET)
1. IMAGE QUALITY
1.1 Spot
1.1.1 Cyclic white spot/black spot
1.1.2 Color Spots due to soilage inside machine
1.1.3 Color spots (black spots)
1.1.4 White Spot due to the developing leakage (foreign material)
1.1.5 White dots from 2nd transfer unit
1.2 Line/Band
1.2.1 Line and uneven density countermeasure flow
1.2.2 White lines (to sub-scan direction)
1.2.3 Gloss line caused by fusing paper exit roller
1.2.4 Banding in the main scan direction on halftone image printed on thick paper(Jitter problem)
1.2.5 Line like ripple on image
1.2.6 Waste toner packing
1.2.7 Darker image up to 44mm from leading edge or after 44mm from white area (Developing memory)
1.2.8 Lines or banding to the main scan direction (CD) due to speed difference between 2nd transfer and fusing
1.2.9 Image got blurred affected by ozone (cyclic white band)
1.2.10 Photoconductor (Drum) memory
1.2.11 Developing screw mark (at low speed)
1.2.12 Lines or banding on image due to speed change (shock noise)
1.2.13 Developing roller (44mm) cycle banding (different density)
1.2.14 Irregular darker or lighter density band appears after leaving machine under high humidity environment (Green)
1.2.15 Jittering lines at trailing edge
1.2.16 8mm interval FD lines
1.2.17 Density change by static electricity
1.2.18 FD Lines and Banding
1.2.19 5mm cycle density difference caused by the fusing unit
1.2.20 Color lines in CD at 13mm from the leading edge
1.2.21 White line due to separation claw mark
1.2.22 Gloss band in CD with margin width
1.2.23 Image lacks at the corner of the trailing edge (Soilage in main scan direction (CD))
1.3 Others
1.3.1 Image after white part becomes darker (Developing ghost)
1.3.2 Darker at the trailing edge of image
1.3.3 Background or toner scattering after continuous low coverage
1.3.4 How to maintain consistent color during continuous printing
1.3.5 Unexpected density drop if “Dens. Adj. Per Paper” set positive (+) value
1.3.6 Small blank area or color registration error
1.3.7 Too high gloss
1.3.8 Rough image on the 1st side of duplex
1.3.9 White or color banding at thick paper leading and trailing edges
1.3.10 C-2451, C-2452, C-2453 or C-2454, Low toner density
1.3.11 Poor transfer at image front
1.3.12 Prevention of the backside soilage
1.3.13 Fainted outline, darker at edge
1.3.14 Image bacground under high temperature
1.3.15 Backside image soilage
1.3.16 Toner is not cleaned at the edge of the transfer belt
1.3.17 Transferability at Feeding Emboss Paper
1.3.18 Image density is lighter on uncoated paper (unsmooth paper)
1.3.19 Gloss memory
1.3.20 Center of line gets broken
1.3.21 Secondary color text scatters
1.3.22 Image offset caused by fusing unit
1.3.23 Tonerband control setting
1.3.24 On the 2nd side of the small size thick paper (ex. Postcard), Uneven color occurs
1.4 Troubleshooting by using CSRA
1.4.1 Darker/Lighter image density and background (CSRA approach)
2. PAPER
2.1 Others
2.1.1 Paper waving
2.1.2 Setting for OHP sheet printing
2.1.3 Trailing edge skews
2.1.4 Printed paper curls (without RU connection)
2.1.5 Fusing wrapping jam
2.1.6 No feed jam (J-1101/J-1201)
2.1.7 Dents on paper at 48mm cycle in FD
2.1.8 Centering error (± 5 mm or more)
2.1.9 Paper stick with each other due to static electricity
2.1.10 Static Sticking in Options
2.1.11 Paper removing procedure on fusing wrap up JAM
2.1.12 J-3102, Thin paper feed failure at the 2nd transfer unit
2.1.13 Paper wrinkle at duplex printing
2.1.14 J-3201 paper is caught by the fusing separation claw
2.1.15 Corner folding at the paper leading edge, machine front side
2.1.16 Leading edge does not looks nice (hitting mark like peeling)
2.1.17 SRA4S Corner folding at the paper trailing edge, machine rear side
2.1.18 Pickup jam clearance workflow
2.2 Troubleshooting by using CSRA
2.2.1 J-16xx (CSRA approach)
3. MACHINE TROUBLES
3.1 Control
3.1.1 Highlight automatic adjustment does not complete normally after trying several times
3.1.2 Print job is not accepted while machine indicates dehumidifying
3.2 Error code
3.2.1 C-2451, C-2452, C-2453 and C-2454 occur
3.2.2 C-3102 ADU wiring connector is disconnected
3.2.3 C2455/C2456/C2457/C2458 Toner density abnormality(High density) occur
3.3 Others
3.3.1 Options cannot be recognized. System configuration display without options
3.3.2 How to eject developer
3.3.3 Image shift
3.3.4 Note for the developing shutter installation work
3.3.5 Productivity decrease at first in the morning under low temperature, low humidity
3.3.6 Release of productivity down mode for small size print under high temperature (Adjustment of toner band creation cycle
for cleaning blade)
3.3.7 ADU MT lever is very hard to release
4. Options
4.1 PF-707
4.1.1 Multi-feed of Plain Fine paper under high temperature and high humidity
4.1.2 PF-707 Wrinkle on paper
4.1.3 PF-707 Paper skew of small size paper
4.1.4 PF-707 Corner fold (dog ear) and conveyance JAM of small size
4.2 LU-202m/LU-202XL
4.2.1 No feed JAM/ Paper skew when feeding a western style envelop (when use MK-746)
4.2.2 LU-202m/LU-202XL J-1501(No feed Jam) occurs when the thick paper and the coated paper is fed
4.2.3 LU-202m/LU-202XL J-1502(No feed JAM) occur when feeding coated paper
4.2.4 LU-202XL Black Line at 104mm, 208mm from leading edge 614mm from trailing edge or narrow trailing space (magnification defect)
4.3 OT-510
4.3.1 J-7229 The paper trailing edge does not go out the paper exit section (Connecting OT-510)
4.4 FS-532
4.4.1 Irregular correspondence of the main tray exit
SA SD-513 TROUBLESHOOTING GUIDE Ver1.0 (REPORTS FROM THE MARKET)
1. SD-513
1.1 Clamp door open/close issue
1.1.1 Symptom
1.1.2 Cause
1.1.3 Solution
1.1.4 Procedures
1.2 Entrance conveyance section JAM (wavy curl paper)
1.2.1 Symptom
1.2.2 Cause
1.2.3 Solution
1.3 Booklet edge soilage (machine front side)
1.3.1 Symptom
1.3.2 Cause
1.3.3 Solution
1.4 4-stitch booklet fold line break at trail edge

& Parts List Manual

Number total of pages (Service Manual & Parts List Manual): 4789.