Konica Minolta Bizhub 423 Bizhub 363 Bizhub 283 Bizhub 223 Field Service Manual

Field Service Manual Konica Minolta Bizhub 423 Bizhub 363 Bizhub 283 Bizhub 223;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Konica Minolta Bizhub copier.
You can print, zoom or read any diagram, picture or page from this Field Service Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Konica Minolta Bizhub 423 Bizhub 363 Bizhub 283 Bizhub 223 photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

Bizhub 423/363/283/223 Main body
OUTLINE
1. SYSTEM CONFIGURATION
2. PRODUCT SPECIFICATIONS
2.1 Type
2.2 Functions
2.3 Paper
2.4 Materials
2.5 Print volume
2.6 Machine specifications
2.7 Operating environment
2.8 Print functions
2.9 Scan functions
MAINTENANCE
3. PERIODICAL MIANTENANCE ITEMS
3.1 Concept of periodical maintenance
3.1.1 Main body (bizhub 423)
3.1.2 Main body (bizhub 363)
3.1.3 Main body (bizhub 283)
3.1.4 Main body (bizhub 223)
3.1.5 DF-621
3.1.6 PC-109/PC-208/PC-409
3.1.7 JS-505
3.1.8 JS-603/FS-527/SD-509/PK-517
3.1.9 FS-529
3.2 Periodical replacement parts list
3.2.1 Main body
3.2.2 Option
3.3 Periodical cleaning parts list
3.3.1 Main body
3.3.2 Option
3.4 Concept of parts life
3.4.1 Life value of consumables and parts
3.4.2 Conditions for life specifications values
4. PERIODICAL MAINTENANCE PROCEDURE
4.1 Housing section
4.1.1 Replacing the ozone filter
4.1.2 Replacing the toner filter (main body)
4.2 Photo conductor section
4.2.1 Replacing the drum unit
4.3 Developing section
4.3.1 Replacing the toner filter (developing unit)
4.3.2 Replacing the developing unit
4.3.3 Replacing the developer
4.4 Toner supply section
4.4.1 Replacing the toner bottle
4.5 Transfer section
4.5.1 Replacing the transfer roller unit
4.6 Paper feed section
4.6.1 Replacing the manual bypass tray feed roller
4.6.2 Replacing the manual bypass tray separation roller assy
4.6.3 Replacing the tray 1 feed roller/tray 1 pick-up roller
4.6.4 Replacing the tray 1 separation roller
4.6.5 Replacing the tray 2 feed roller/tray 2 pick-up roller
4.6.6 Replacing the tray 2 separation roller
4.7 Registration section
4.7.1 Replacing the timing roller bearings/timing roller gear1, 2
4.7.2 Replacing the paper dust remover
4.7.3 Cleaning of the timing roller
4.8 Fusing section
4.8.1 Replacing the fusing unit
4.9 Duplex section
4.9.1 Cleaning of the duplex transport rollers
5. OTHER MAINTENANCE ITEMS
5.1 Disassembly/adjustment prohibited items
5.1.1 CCD unit
5.1.2 PH unit
5.1.3 Fusing unit
5.2 Notes when transporting the machine
5.2.1 Protective materials
5.3 Disassembly/reassembly parts list
5.4 Cleaning parts list
5.5 Disassembly/reassembly procedure
5.5.1 Front door
5.5.2 Left cover
5.5.3 Exit tray
5.5.4 Rear right cover
5.5.5 Upper right cover
5.5.6 Rear cover/1
5.5.7 Rear cover/2
5.5.8 Lower rear cover
5.5.9 Scanner rear cover
5.5.10 Scanner right cover
5.5.11 Scanner right front cover
5.5.12 USB interface cover
5.5.13 Scanner left front cover
5.5.14 Scanner upper front cover
5.5.15 Scanner left cover
5.5.16 Scanner upper rear cover
5.5.17 Scanner front cover
5.5.18 Slit glass cover
5.5.19 Original glass
5.5.20 Control panel assy
5.5.21 Tray 1
5.5.22 Tray 2
5.5.23 Front cover
5.5.24 Imaging unit
5.5.25 Tray 1 paper feed unit
5.5.26 Tray 2 paper feed unit
5.5.27 PH unit
5.5.28 CCD board unit
5.5.29 Exposure unit
5.5.30 Toner hopper unit
5.5.31 Regist unit
5.5.32 Switchback unit
5.5.33 Manual bypass tray unit
5.5.34 Conveyance unit
5.5.35 Hopper drive unit
5.5.36 MFP board box
5.5.37 Main drive unit
5.5.38 Hard disk drive
5.5.39 Scanner relay board (REYB/SCAN)
5.5.40 Inverter board (INVB)
5.5.41 Machine condition monitor board (MCMB)
5.5.42 Printer control board (PRCB)
5.5.43 DC power supply (DCPU)
5.5.44 MFP board (MFPB)
5.5.45 High voltage unit (HV)
5.5.46 SODIMM (DIMM)
5.5.47 NVRAM board (NRB)
5.5.48 Paper feed tray 1 paper FD sensor board (PSDB/1)
5.5.49 Paper feed tray 2 paper FD sensor board (PSDB/2)
5.5.50 Paper feed tray 1 LED board, Paper feed tray 2 LED board (LEDB1, LEDB2)
5.5.51 Scanner motor (M201)
5.5.52 Duplex transport motor (M92)
5.5.53 Transport motor (M1)
5.5.54 PC motor (M2)
5.5.55 Toner bottle motor (M3)
5.5.56 Toner supply motor (M4)
5.5.57 Switchback motor (M91)
5.5.58 Tray 1 lift-up motor (M11)
5.5.59 Tray 2 lift-up motor (M21)
5.5.60 Power supply cooling fan motor (FM1)
5.5.61 Cooling fan motor (FM2)
5.5.62 Fusing unit cooling fan motor (FM3)
5.5.63 Toner suction fan motor (FM4)
5.5.64 MFP board cooling fan motor (FM5)
5.5.65 Tray 1 paper feed clutch (CL11)
5.5.66 Tray 2 paper feed clutch (CL21)
5.5.67 Tray 2 vertical transport clutch (CL22)
5.5.68 Manual paper feed clutch (CL81)
5.5.69 Registration clutch (CL1)
5.5.70 Manual pick-up solenoid (SD81)
5.5.71 Temperature/humidity sensor (TEM/HUM)
5.5.72 Scanner drive cable
5.6 Cleaning procedure
5.6.1 Tray 1 feed roller, tray 1 pick-up roller, tray 1 separation roller
5.6.2 Tray 2 feed roller, tray 2 pick-up roller, tray 2 separation roller
5.6.3 Tray 2 transport roller
5.6.4 Manual bypass tray feed roller
5.6.5 Manual bypass tray separation roller
5.6.6 Original glass
5.6.7 Scanner rails
5.6.8 Mirrors (1st/2nd/3rd)
5.6.9 Lens
5.6.10 CCD sensor
6. SERVICE TOOL
6.1 Service material list
7. FIRMWARE REWRITING
7.1 Outline
7.2 USB memory
7.2.1 Preparation
7.2.2 Procedure
7.2.3 Action when data transfer fails
7.3 Updating the firmware with the Internet ISW
7.3.1 Outline
7.3.2 Service environment
7.3.3 Preparations for firmware rewriting
7.3.4 Firmware rewriting from the control panel
7.3.5 Firmware rewriting from the CS Remote Care
7.3.6 Error code list for the Internet ISW
8. COMMERCIALLY AVAILABLE PARTS
8.1 Installing the key counter
8.1.1 Configuration
8.1.2 Procedure
8.2 Installing the original size detection sensor/2 (PS205)
8.2.1 Procedure

ADJUSTMENT/SETTING
9. HOW TO USE THE ADJUSTMENT/SETTING SECTION
10. UTILITY
10.1 List of utility mode
10.2 Starting/Exiting
10.2.1 Starting procedure
10.2.2 Exiting procedure
10.3 Touch Panel Adjustment
10.4 One-Touch User Box Registration
10.4.1 Create One-Touch destination-Address Book (Public)/(Personal)
10.4.2 Create One-Touch destination-Group
10.4.3 Create One-Touch destination-E-mail Settings
10.4.4 Create User Box
10.4.5 Create User Box-Public/Personal User Box
10.4.6 Create User Box-Confidential RX User Box
10.4.7 Create User Box-Bulletin Board User Box
10.4.8 Create User Box-Relay User Box
10.4.9 Limiting Access to Destinations
10.4.10 Limiting Access to Destinations-Apply Levels/Groups to Destinations
10.5 User Settings
10.5.1 System Settings-Language Selection
10.5.2 System Settings-Measurement Unit Settings
10.5.3 System Settings-Paper Tray Settings
10.5.4 System Settings-Auto Color Level Adjust
10.5.5 System Settings-Power Save Settings
10.5.6 System Settings-Output Settings
10.5.7 System Settings-AE Level Adjustment
10.5.8 System Settings-Auto Paper Select for Small Original
10.5.9 System Settings-Blank Page Print Settings
10.5.10 System Settings-Page Number Print Position
10.5.11 System Settings-Select Keyboard
10.5.12 Custom Display Settings-Copier Settings
10.5.13 Custom Display Settings-Scan/Fax Settings
10.5.14 Custom Display Settings-User Box Settings
10.5.15 Custom Display Settings-Copy Screen
10.5.16 Custom Display Settings-Fax Active Screen
10.5.17 Custom Display Settings-Color Selection Settings
10.5.18 Custom Display Settings-Left Panel Display Default
10.5.19 Custom Display Settings-Search Option Settings
10.5.20 Copier Settings-Auto Booklet ON when Fold & Staple
10.5.21 Copier Settings-Auto Zoom for Combine/Booklet
10.5.22 Copier Settings-Auto Sort/Group Selection
10.5.23 Copier Settings-Default Copy Settings
10.5.24 Copier Settings-Default Enlarge Display Settings
10.5.25 Copier Settings-When AMS Direction is Incorrect
10.5.26 Copier Settings-Separate Scan Output Method
10.5.27 Copier Settings-Enlargement Rotation
10.5.28 Copier Settings-Auto Zoom (Platen)
10.5.29 Copier Settings-Auto Zoom (ADF)
10.5.30 Copier Settings-Specify Default Tray when APS Off
10.5.31 Copier Settings-Select Tray for Insert Sheet
10.5.32 Copier Settings-Half-Fold Specification
10.5.33 Copier Settings-Print Jobs During Copy Operation
10.5.34 Copier Settings-Automatic Image Rotation
10.5.35 Copier Settings-Finishing Program
10.5.36 Copier Settings-Card Shot Settings
10.5.37 Scan/Fax Settings-JPEG Compression Level
10.5.38 Scan/Fax Settings-Black Compression Level
10.5.39 Scan/Fax Settings-TWAIN Lock Time
10.5.40 Scan/Fax Settings-Default Scan/Fax Settings
10.5.41 Scan/Fax Settings-Default Enlarge Display Settings
10.5.42 Scan/Fax Settings-Compact PDF/XPS Compression Level
10.5.43 Scan/Fax Settings-Color TIFF Type
10.5.44 Scan/Fax Settings-OCR Operation Setting
10.5.45 Scan/Fax Settings-Graphic Outlining
10.5.46 Printer Settings-Basic Settings
10.5.47 Printer Settings-Paper Setting
10.5.48 Printer Settings-PCL Settings
10.5.49 Printer Settings-PS Setting
10.5.50 Printer Settings-XPS Settings
10.5.51 Printer Settings-Print Reports
10.5.52 Printer Settings-TIFF Image Paper Setting
10.5.53 Change Password
10.5.54 Change E-mail Address
10.5.55 Change Icon
10.5.56 Register Authentication Settings
10.5.57 Registered Application Setting-Default Application Selection
10.5.58 Cellular Phone/PDA Setting-Link File Error Notification
10.5.59 Cellular Phone/PDA Setting-Proxy Server Use
10.5.60 Cellular Phone/PDA Setting-Print Settings
10.6 Administrator Settings
10.6.1 System Settings-Power Save Settings
10.6.2 System Settings-Output Settings
10.6.3 System Settings-Date/Time Settings
10.6.4 System Settings-Daylight Saving Time
10.6.5 System Settings-Weekly Timer Settings
10.6.6 System Settings-Restrict User Access
10.6.7 System Settings-Expert Adjustment
10.6.8 System Settings-List/Counter
10.6.9 System Settings-Reset Settings
10.6.10 System Settings-User Box Settings
10.6.11 System Settings-Standard Size Setting
10.6.12 System Settings-Stamp Settings
10.6.13 System Settings-Blank Page Print Settings
10.6.14 System Settings-Application Key Settings
10.6.15 System Settings-Skip Job Operation Settings
10.6.16 System Settings-Default Bypass Paper Type Setting
10.6.17 System Settings-Page Number Print Position
10.6.18 System Settings-Advanced Preview Setting
10.6.19 Administrator/Machine Settings-Administrator Registration
10.6.20 Administrator/Machine Settings-Input Machine Address
10.6.21 One-Touch/User Box Registration-Create One-Touch Destination
10.6.22 One-Touch/User Box Registration-Create User Box
10.6.23 One-Touch/User Box Registration-One-Touch/User Box Registration List 249
10.6.24 One-Touch/User Box Registration-Maximum Number of User Boxes
10.6.25 User Authentication/Account Track-General Settings
10.6.26 User Authentication/Account Track-User Authentication Setting
10.6.27 User Authentication/Account Track-Account Track Setting
10.6.28 User Authentication/Account Track-Print without Authentication
10.6.29 User Authentication/Account Track-Print Counter List
10.6.30 User Authentication/Account Track-External Server Settings
10.6.31 User Authentication/Account Track-Limiting Access to Destinations
10.6.32 User Authentication/Account Track-Authentication Device Settings
10.6.33 User Authentication/Account Track-Auth/Acct Track Common Setting
10.6.34 User Authentication/Account Track-Scan to Home Settings
10.6.35 User Authentication/Account Track-Scan to Authorized Folder Settings
10.6.36 Network Settings-TCP/IP Settings
10.6.37 Network Setting-NetWare Settings
10.6.38 Network Settings-http Server Settings
10.6.39 Network Settings-FTP Settings
10.6.40 Network Settings-SMB Setting
10.6.41 Network Settings-LDAP Settings
10.6.42 Network Settings-E-mail Settings
10.6.43 Network Settings-SNMP Setting
10.6.44 Network Settings-AppleTalk Settings
10.6.45 Network Settings-Bonjour Setting
10.6.46 Network Settings-TCP Socket Settings
10.6.47 Network Settings-Network Fax Setting
10.6.48 Network Settings-WebDAV Settings
10.6.49 Network Settings-Web Service Settings
10.6.50 Network Settings-SSDP Settings
10.6.51 Network Settings-Detail Settings
10.6.52 Network Settings-IEEE802.1X Authentication Settings
10.6.53 Network Settings-Web Browser Setting
10.6.54 Network Settings-Bluetooth Setting
10.6.55 Copier Settings-Auto Zoom (Platen)
10.6.56 Copier Settings-Auto Zoom (ADF)
10.6.57 Copier Settings-Specify Default Tray when APS OFF
10.6.58 Copier Settings-Select Tray for Insert Sheet
10.6.59 Copier Settings-Print Jobs During Copy Operation
10.6.60 Copier Settings-Automatic Image Rotation
10.6.61 Copier Settings-Card Shot Settings
10.6.62 Printer Settings-USB Timeout
10.6.63 Printer Settings-Network Timeout
10.6.64 Printer Settings-Print XPS Errors
10.6.65 Printer Settings-PSWC Direct Print
10.6.66 Printer Settings-Assign Account to Acquire Device Info
10.6.67 Fax Settings
10.6.68 Fax Settings-Header Information
10.6.69 Fax Settings-Header/Footer Position
10.6.70 Fax Settings-Line Parameter Setting
10.6.71 Fax Settings-TX/RX Settings
10.6.72 Fax Settings-Function Settings
10.6.73 Fax Settings-PBX Connection Setting
10.6.74 Fax Settings-Report Settings
10.6.75 Fax Settings-Job Settings List
10.6.76 Fax Settings-Multi Line Settings
10.6.77 Fax Settings-Network Fax Settings
10.6.78 Fax Print Quality Settings
10.6.79 System Connection-OpenAPI Settings
10.6.80 System Connection-Call Remote Center
10.6.81 System Connection-Automatic Prefix/Suffix Setting
10.6.82 System Connection-Printer Information
10.6.83 System Connection-Cellular Phone/PDA Setting
10.6.84 Security Settings-Administrator Password
10.6.85 Security Settings-User Box Admin. Setting
10.6.86 Security Settings-Administrator Security Levels
10.6.87 Security Settings-Security Details
10.6.88 Security Settings-Enhanced Security Mode
10.6.89 Security Settings-HDD Settings/SSD Settings
10.6.90 Security Settings-Function Management Setting
10.6.91 Security Settings-Stamp Settings
10.6.92 Security Settings-Image Log Transfer Settings
10.6.93 Security Settings-Driver Password Encryption Setting
10.6.94 License Settings-Get Request Code
10.6.95 License Settings-Install License
10.6.96 License Settings-List of Enabled Functions
10.6.97 OpenAPI Authentication Management-Restriction Code Setting
10.7 My Panel Settings
10.8 Device Information
10.9 Meter Count
10.9.1 Counter details
11. ADJUSTMENT ITEM LIST
12. SERVICE MODE
12.1 List of service mode
12.2 Starting/Exiting
12.2.1 Starting procedure
12.3 Date/Time Input mode
12.4 Machine
12.4.1 Fusing Temperature
12.4.2 Org. Size Detecting Sensor Adj
12.4.3 Printer Area-Leading Edge Adjustment
12.4.4 Printer Area-Printer Image Centering Side 1
12.4.5 Printer Area-Leading Edge Adj. Side 2 (Duplex)
12.4.6 Printer Area-Prt. Image Center. Side 2 (Dup)
12.4.7 Printer Area-Paper Feed Direction Adj
12.4.8 Tray Printing Position: Tip
12.4.9 Scan Area
12.4.10 Scan Area-Image Position: Leading Edge
12.4.11 Scan Area-Scanner Image Centering
12.4.12 Scan Area-Main Scan Zoom Adj
12.4.13 Scan Area-Sub Scan Zoom Adj
12.4.14 Printer Reg. Loop Adj
12.4.15 Manual Bypass Tray Width Adj
12.4.16 Lead Edge Erase Adjustment
12.4.17 ADF Scan Glass Contamination
12.4.18 Non-Image Area Erase Check
12.4.19 Cooling Fan Stop Delay
12.4.20 Fusing Productivity Choice
12.4.21 Print Interval Extension
12.5 Firmware Version
12.6 Imaging Process Adjustment
12.6.1 Gradation Adjust
12.6.2 Max Image Density Adj
12.6.3 TCR Level Setting
12.6.4 Image Background Adj
12.6.5 Transfer Voltage Fine Adj
12.6.6 TCR Sensor Adjust
12.6.7 Paper Separation Adjustment – Paper separation adjustment
12.6.8 Paper Separation Adjustment – Paper Separation Voltage Adjust
12.6.9 Manual Toner Add
12.6.10 Dot Enhancement
12.7 CS Remote Care
12.7.1 Outlines
12.7.2 Setting up the CS Remote Care
12.7.3 Software SW setting for CS Remote Care
12.7.4 Setup confirmation
12.7.5 Calling the maintenance
12.7.6 Calling the center from the administrator
12.7.7 Checking the transmission log
12.7.8 Detail on settings
12.7.9 List of the CS Remote Care error code
12.7.10 Troubleshooting for CS Remote Care
12.7.11 CS Remote Care Operation under Enhanced Security Mode
12.8 System 1
12.8.1 Marketing Area
12.8.2 Tel/Fax Number
12.8.3 Serial Number
12.8.4 Sleep ON/OFF Choice Setting
12.8.5 Foolscap Size Setting
12.8.6 Original Size Detection
12.8.7 Install Date
12.8.8 Initialization-Clear All Data
12.8.9 Initialization-Clear Individual Data
12.8.10 Initialization-System Error Clear
12.8.11 Problem Unit Isolation Set
12.8.12 Machine State LED Setting
12.9 System 2
12.9.1 HDD
12.9.2 Image Controller Setting
12.9.3 Option Board Status
12.9.4 Consumable Life Reminder
12.9.5 Unit Change
12.9.6 Software Switch Setting
12.9.7 Software Switch Setting-Setting items in the software switch setting
12.9.8 CDD Calibration
12.9.9 LCT Paper Size Setting
12.9.10 Line Mag Setting
12.9.11 Data Capture
12.9.12 ADF Scan Glass Contamin. Set.-ADF Scan Glass Contamin. Sensitivity
12.9.13 ADF Scan Glass Contamin. Set.-ADF Scan Glass Contamin. Warn/Level
12.9.14 ADF Scan Glass Contamin. Set.-ADF Scan Glass Contamin. During Scan
12.9.15 Stamp
12.9.16 Network Fax Settings
12.9.17 User Paper Settings
12.9.18 Coverage Rate Screen
12.9.19 JAM Code Display Setting
12.9.20 BootUp Screen
12.9.21 Install Data
12.9.22 Bluetooth Settings
12.9.23 Auto Drum Dry
12.10 Counter
12.10.1 Common procedure
12.10.2 Life
12.10.3 Service Call Counter
12.10.4 Section Service Call
12.10.5 Warning
12.10.6 Maintenance
12.10.7 Service Total
12.10.8 Counter of Each Mode
12.10.9 Service Call History (Data)
12.10.10 ADF Paper Pages
12.10.11 Paper Jam History
12.10.12 Fax Connection Error
12.10.13 ADF Scan Glass Contamin. Counter
12.10.14 Jam
12.10.15 Section JAM
12.11 List Output
12.11.1 Batch List CSV Output
12.11.2 Machine Management List
12.11.3 Adjustment List
12.11.4 Parameter List
12.11.5 Service Parameter
12.11.6 Protocol Trace
12.11.7 Fax Setting List
12.11.8 Fax Analysis List
12.11.9 SIP Protocol Trace
12.12 State Confirmation
12.12.1 Sensor Check
12.12.2 Sensor check screens
12.12.3 Sensor check list
12.12.4 Table Number
12.12.5 Level History1
12.12.6 Level History 2
12.12.7 Temp. & Humidity
12.12.8 CCD Check
12.12.9 Memory/HDD Adj.-Memory Check
12.12.10 Memory/HDD Adj.-Compress / Decompression Check
12.12.11 Memory/HDD Adj.-JPEG Check
12.12.12 Memory/HDD Adj.-Memory Bus Check
12.12.13 Memory/HDD Adj.-DSC Bus Check
12.12.14 Memory/HDD Adj.-HDD R/W Check
12.12.15 Memory/HDD Adj.-SSD R/W Check
12.12.16 Memory/HDD Adj.-HDD Format
12.12.17 Memory/HDD Adj.-SSD Format
12.12.18 Memory/HDD Adj.-SSD -> HDD Data Copy
12.12.19 Memory/HDD State
12.12.20 Adjustment Data List
12.13 Test Mode
12.13.1 Procedure for test pattern output
12.13.2 Gradation Pattern
12.13.3 Halftone Pattern
12.13.4 Lattice Pattern
12.13.5 Paper Passage Test
12.13.6 Fax Test
12.14 ADF
12.14.1 Original Stop Position
12.14.2 Registration Loop Adj
12.14.3 Auto Stop Position Adjustment
12.14.4 Paper Passage
12.14.5 Sensor Check
12.14.6 Original Tray Width
12.14.7 Read Pos Adj
12.14.8 Feed Zoom
12.14.9 Scanning Light Adjustment
12.14.10 Mixed original Size adjustment
12.14.11 FD-Mag. Adj. (B)
12.15 FAX setting
12.15.1 Line1, Line2-Modem/NCU
12.15.2 Line 1, Line 2-Network
12.15.3 Line 1-System
12.15.4 Line 1-Fax File Format
12.15.5 Line 1, Line 2-Communication
12.15.6 Line 1-List Output
12.15.7 Line 1-Function Parameter
12.15.8 Line 1, Line 2-Initialization
12.16 Finisher
12.16.1 FS-FN adjustment – Center Staple Position
12.16.2 FS-FN adjustment – Half-Fold Position
12.16.3 FS-FN adjustment – Punch Edge Adj
12.16.4 FS-FN adjustment – Punch Regist Loop Size
12.16.5 FS-FN adjustment – Finisher Components Test Mode
12.16.6 FS-FN adjustment – Load Data
12.16.7 FS-FN adjustment – Alignment Plate Position
12.16.8 FS-FN adjustment – Paper Alignment Guides W. Adj
12.16.9 Punch Option Setting
12.16.10 Job Separator
12.17 Internet ISW
12.17.1 Internet ISW Set
12.17.2 HTTP Setting
12.17.3 HTTP Setting-Data Input Setting
12.17.4 HTTP Setting-Connect Proxy
12.17.5 HTTP Setting-Proxy Server
12.17.6 HTTP Setting-Proxy Authentication
12.17.7 HTTP Setting-Connection Time-Out
12.17.8 FTP Setting
12.17.9 FTP Setting-Data Input Setting
12.17.10 FTP Setting-Connect Proxy
12.17.11 FTP Setting-Proxy Server
12.17.12 FTP Setting-Connection Setting
12.17.13 Forwarding Access Setting-User ID
12.17.14 Forwarding Access Setting-Password
12.17.15 Forwarding Access Setting-URL
12.17.16 Forwarding Access Setting-FileName
12.17.17 Download
13. ENHANCED SECURITY
13.1 List of Enhanced Security
13.2 Starting/Exiting
13.2.1 Starting procedure
13.2.2 Exiting procedure
13.3 Enhanced Security
13.3.1 CE Password
13.3.2 Administrator Password
13.3.3 Administrator Feature Level
13.3.4 CE Authentication
13.3.5 Life Stop Setting
13.3.6 NVRAM Data Backup
13.3.7 Operation Ban release time
13.3.8 Administrator unlocking
13.3.9 Engine FW DipSW
14. BILLING SETTING
14.1 List of billing setting
14.2 Starting/Exiting
14.2.1 Starting procedure
14.2.2 Exiting procedure
14.3 Billing Setting
14.3.1 Counter Setting
14.3.2 Management Function Choice
14.3.3 Management Function Choice-Key Counter IF Vendor
14.3.4 Management Function Choice-Authentication Device 1
14.3.5 Management Function Choice-Authentication Device 2
14.3.6 Management Function Choice-Key Counter Only
14.3.7 Management Function Choice-Management Device 1
14.3.8 Management Function Choice-Management Device 2
14.3.9 Management Function Choice-Vendor 1
14.3.10 Management Function Choice-Vendor 2
14.3.11 Coverage Rate Clear
14.3.12 OpenAPI Authentication Management-Restriction Code
14.3.13 OpenAPI Authentication Management-Region Code
15. CONTENTS TO BE CLEARED BY RESET FUNCTION
16. MECHANICAL ADJUSTMENT
16.1 Mechanical adjustment of the scanner section
16.1.1 Adjustment of the scanner motor belt
16.1.2 Positioning of the exposure unit and mirrors unit
16.2 Mechanical adjustment of the paper feed section
16.2.1 Skew adjustment of the tray 1/2
16.2.2 Centering adjustment of the tray 1/2
16.2.3 Adjustment of the bypass paper size unit

TROUBLESHOOTING
17. JAM DISPLAY
17.1 List of JAM code
17.1.1 Misfeed display resetting procedure
17.2 Sensor layout
17.2.1 Main body
17.2.2 DF-621
17.2.3 PC-109/PC-208
17.2.4 PC-409
17.2.5 JS-505
17.2.6 FS-529
17.2.7 FS-527/SD-509/PK-517/JS-603
17.3 Solution
17.3.1 Initial check items
17.3.2 Misfeed at manual bypass feed section
17.3.3 Misfeed at tray 1 feed section
17.3.4 Misfeed at tray 2 feed section
17.3.5 Tray 3 feed section/vertical transport section misfeed
17.3.6 Tray 4 feed section/vertical transport section misfeed
17.3.7 LCT paper feed section/vertical transport section misfeed
17.3.8 Misfeed at vertical transport section
17.3.9 Misfeed at image transfer section
17.3.10 Misfeed at exit section
17.3.11 ADF turnover section
17.3.12 ADF paper feed section
17.3.13 ADF transport section
17.3.14 ADF paper exit section
17.3.15 ADF image reading section
17.3.16 Code: 72-14
17.3.17 Code: 72-15
17.3.18 Code: 72-16
17.3.19 Code: 72-17
17.3.20 Code: 72-18
17.3.21 Code: 72-19
17.3.22 Code: 72-21
17.3.23 Code: 72-22
17.3.24 Code: 72-26
17.3.25 Code: 72-43
17.3.26 Code: 72-81
17.3.27 Code: 72-85
17.3.28 Code: 72-86
17.3.29 Code: 72-87
17.3.30 Misfeed at duplex pre-registration section
17.3.31 Misfeed at duplex transport section
18. MALFUNCTION CODE
18.1 Display procedure
18.2 List
18.3 Solution
18.3.1 S-1: CCD gain adjustment failure
18.3.2 D-1: Split line detect
18.3.3 P-27: Transfer ATVC failure
19. TROUBLE CODE
19.1 Display procedure
19.2 Trouble resetting procedure
19.2.1 Trouble resetting procedure by Trouble Reset key
19.3 Trouble isolation function
19.4 List
19.5 Solution
19.5.1 C0001: LCT communication error
19.5.2 C0202: Tray 1 feeder up/down abnormality
19.5.3 C0204: Tray 2 feeder up/down abnormality
19.5.4 C0206: Tray 3 lift-up failure
19.5.5 C0208: Tray 4 lift-up failure
19.5.6 C0209: LCT elevator motor failure
19.5.7 C0210: LCT lift failure
19.5.8 C0211: Manual feed up/down abnormality
19.5.9 C0212: LCT lock release failure
19.5.10 C0213: LCT shift gate operation failure
19.5.11 C0214: LCT shift failure
19.5.12 C0215: LCT shift motor failure
19.5.13 C1004: FNS communication error
19.5.14 C1081: SD communication error
19.5.15 C1113: Center-staple lead edge stopper motor malfunction
19.5.16 C1114: Center-staple front adjust drive motor malfunction
19.5.17 C1115: Center-staple knife drive motor malfunction
19.5.18 C1116: Center-staple transfer motor malfunction
19.5.19 C1150: Center-staple rear adjust drive motor malfunction
19.5.20 C1156: Center-staple paddle roller motor malfunction (trailing edge)
19.5.21 C1158: Center-staple paddle roller motor malfunction (leading edge)
19.5.22 C1181: Malfunctioning of belt up/down movement
19.5.23 C1182: Shift motor drive malfunction
19.5.24 C1183: Elevate drive malfunction
19.5.25 C1190: Alignment plate motor drive malfunction / Alignment plate R drive malfunction
19.5.26 C1191: Alignment plate F drive malfunction
19.5.27 C1194: Leading edge stopper motor drive malfunction
19.5.28 C11A1: Tray 2 exit roller pressure/ retraction malfunction / Exit roller pressure/ retraction malfunction
19.5.29 C11A2: Accommodation roller pressure/ retraction malfunction
19.5.30 C11A7: Tray 3 exit roller pressure/ retraction malfunction
19.5.31 C11B0: Stapler movement drive malfunction
19.5.32 C11B2: Staple drive malfunction
19.5.33 C11B5: Saddle stapler drive malfunction
19.5.34 C11C0: Punch motor drive malfunction
19.5.35 C11E0: Duplex path switching motor drive malfunction / Finisher route change malfunction
19.5.36 C11E1: Upper lower path switching motor drive malfunction
19.5.37 C11E2: Tray 1 path switching motor drive malfunction
19.5.38 C1301: Fan motor drive malfunction
19.5.39 C1402: FS NVRAM memory error
19.5.40 C2201: Toner bottle motor’s turning at abnormal timing
19.5.41 C2253: PC motor’s failure to turn
19.5.42 C2254: PC motor’s turning at abnormal timing
19.5.43 C2350: Toner suction fan motor’s turning at abnormal timing
19.5.44 C2557: Abnormally low toner density detected TCR sensor
19.5.45 C2558: Abnormally high toner density detected TCR sensor
19.5.46 C255C: TCR sensor adjustment failure
19.5.47 C2564: TCR sensor failure
19.5.48 C2650: Main backup media access error
19.5.49 C3421: Fusing heaters trouble (center)
19.5.50 C3423: Fusing heaters trouble (edge)
19.5.51 C3721: Fusing abnormally high temperature detection (center)
19.5.52 C3723: Fusing abnormally high temperature detection (edge)
19.5.53 C3821: Fusing abnormally low temperature detection (center)
19.5.54 C3823: Fusing abnormally low temperature detection (edge)
19.5.55 C4101: Polygon motor rotation trouble
19.5.56 C4501: Laser malfunction
19.5.57 C5102: Transport motor’s failure to turn
19.5.58 C5103: Transport motor’s turning at abnormal timing
19.5.59 C5351: Power supply cooling fan motor/1’s failure to turn
19.5.60 C5356: Cooling fan motor’s failure to turn
19.5.61 C5370: MFP control board cooling fan motor’s failure to turn
19.5.62 C5501: AC signal abnormality
19.5.63 C5601: Engine control malfunction
19.5.64 C5602: FPGA configuration error
19.5.65 C6102: Drive system home sensor malfunction
19.5.66 C6103: Slider over running
19.5.67 C6704: Image input time out
19.5.68 C6751: CCD clamp/gain adjustment failure
19.5.69 C6752: ASIC clock input error
19.5.70 C6901: DSC board mount failure 1
19.5.71 C6902: DSC board bus check NG1-1
19.5.72 C6903: DSC board bus check NG1-2
19.5.73 C6F01: Scanner sequence trouble 1
19.5.74 C8101: Before reading pressure welding alienation mechanism trouble
19.5.75 C8107: Glass cleaning mechanism trouble
19.5.76 C8302: Cooling fan trouble
19.5.77 C9401: Exposure turning on the lamp trouble detection
19.5.78 C9402: Exposure turning on the lamp abnormally detection
19.5.79 CA051: Standard controller configuration failure
19.5.80 CA052: Controller hardware error
19.5.81 CA053: Controller start failure
19.5.82 CC001: Vendor connection failure
19.5.83 CC151: ROM contents error upon startup (MSC)
19.5.84 CC152: ROM contents error upon startup (Scanner)
19.5.85 CC153: ROM contents error upon startup (PRT)
19.5.86 CC155: Finisher ROM error
19.5.87 CC156: ADF ROM error
19.5.88 CC159: ROM contents error upon startup (DSC1)
19.5.89 CC15A: ROM contents error upon startup (DSC2)
19.5.90 CC163: ROM contents error (PRT)
19.5.91 CC164: ROM contents error (MSC)
19.5.92 CC165: ROM contents error (ADF)
19.5.93 CC170: Dynamic link error during starting (AP0)
19.5.94 CC171: Dynamic link error during starting (AP1)
19.5.95 CC172: Dynamic link error during starting (AP2)
19.5.96 CC173: Dynamic link error during starting (AP3)
19.5.97 CC174: Dynamic link error during starting (AP4)
19.5.98 CC180: Dynamic link error during starting (LDR)
19.5.99 CC181: Dynamic link error during starting (IBR)
19.5.100 CC182: Dynamic link error during starting (IID)
19.5.101 CC183: Dynamic link error during starting (IPF)
19.5.102 CC184: Dynamic link error during starting (IMY)
19.5.103 CC185: Dynamic link error during starting (SPF)
19.5.104 CC186: Dynamic link error during starting (OAP)
19.5.105 CC190: Outline font load error
19.5.106 CC191: Setting parameter load error
19.5.107 CD002: JOB RAM save error
19.5.108 CD004: Hard disk access error (connection failure)
19.5.109 CD00F: Hard disk data transfer error
19.5.110 CD020: Hard disk verify error
19.5.111 CD010: Hard disk unformat
19.5.112 CD011: Hard disk out of specifications mounted
19.5.113 CD041 to CD046: HDD command execution error
19.5.114 CD047 to CD04B: HDD SCSI library error
19.5.115 CD201: File memory mounting error
19.5.116 CD202: Memory capacity discrepancy
19.5.117 CD203: Memory capacity discrepancy 2
19.5.118 CD211: PCI-SDRAM DMA operation failure
19.5.119 CD212: Compression/extraction timeout detection
19.5.120 CD231: No Fax memory at FAX board mounting
19.5.121 CD241: Encryption ASIC setting error
19.5.122 CD242: Encryption ASIC mounting error
19.5.123 CD261: USB host board failure
19.5.124 CD271: i-Option activated and additional memory not installed
19.5.125 CD272: i-Option activated and additional memory and HDD not installed
19.5.126 CD3##: NVRAM data error
19.5.127 CD401: NACK command incorrect
19.5.128 CD402: ACK command incorrect
19.5.129 CD403: Checksum error
19.5.130 CD404: Receiving packet incorrect
19.5.131 CD405: Receiving packet analysis error
19.5.132 CD406: ACK receiving timeout
19.5.133 CD407: Retransmission timeout
19.5.134 CE001: Abnormal message queue
19.5.135 CE003: Task error
19.5.136 CE004: Event error
19.5.137 CE005: Memory access error
19.5.138 CE006: Header access error
19.5.139 CE007: DIMM initialize error
19.5.140 CE002: Message and method parameter failure
19.5.141 CEEE1: MFP board malfunction
19.5.142 CEEE2: Scanner section malfunction
19.5.143 CEEE3: Printer control board malfunction
19.5.144 CFB00 to CFF5E: Abort code
20. FAX TROUBLECODE
20.1 ERROR CODES
20.2 DIAGNOSTIC CODES
20.2.1 Outline
20.2.2 Explanation
20.3 Error Code (Network fax)
20.3.1 Error code of the transmission system
20.3.2 Error code of the reception system
21. NETWORK ERROR CODE
21.1 Display procedure
21.2 List
22. POWER SUPPLY TROUBLE
22.1 Machine is not energized at all (DCPU operation check)
22.2 Fusing heaters do not operate
22.3 Power is not supplied to option
22.3.1 DF-621
22.3.2 PC-109/208/409
22.3.3 FS-527/529
23. IMAGE QUALITY PROBLEM
23.1 How to read element date
23.1.1 Table number
23.1.2 Level history 1
23.1.3 Level history 2
23.2 How to identify problematic part
23.3 Initial check items
23.3.1 Initial check items 1
23.3.2 Initial check items 2
23.4 Solution
23.4.1 Scanner system: Blank copy or black copy
23.4.2 Scanner system: Low image density or rough image
23.4.3 Scanner System: Foggy background
23.4.4 Scanner system: Black streaks or bands
23.4.5 Scanner system: Black spots
23.4.6 Scanner system: White streaks or bands
23.4.7 Scanner system: Uneven pitch
23.4.8 Printer system: Blank copy or black copy
23.4.9 Printer system: Low image density or rough image
23.4.10 Printer system: Foggy background
23.4.11 Printer system: Black streaks or bands in sub scan direction
23.4.12 Printer system: Black streaks or bands in main scan direction
23.4.13 Printer system: Black spots
23.4.14 Printer system: White streaks or bands in sub scan direction
23.4.15 Printer system: White streaks or bands in main scan direction
23.4.16 Printer system: Void areas
23.4.17 Printer system: Smears on back of paper
23.4.18 Printer system: Uneven image density
23.4.19 Printer system: Gradation reproduction failure
23.4.20 Printer system: Uneven pitch
24. IC protector
24.1 Outline
24.2 IC protector list
24.2.1 Main body
24.2.2 DF-621
24.2.3 PC-109/PC-208
24.2.4 PC-409
24.2.5 JS-505
24.2.6 FS-527
24.2.7 SD-509
24.2.8 FS-529

APPENDIX
25. PARTS LAYOUT DRAWING
25.1 Main body
25.1.1 Scanner section
25.1.2 Front side
25.1.3 Back side
25.1.4 Left side
25.1.5 Right side
25.1.6 Duplex/Switchback/Fusing section
25.1.7 Manual bypass tray
25.1.8 Tray 1
25.1.9 Tray 2
25.2 DF-621/SP-501
25.3 PC-109/PC-208 (Option)
25.4 PC-409 (Option)
25.5 JS-505 (Option)
25.6 FS-527 (Option)
25.7 PK-517 (Option)
25.8 SD-509 (Option)
25.9 JS-603 (Option)
25.10 FS-529 (Option)
26. CONNECTOR LAYOUT DRAWING
26.1 Main body
26.1.1 Printer control board (PRCB)
26.1.2 MFP board (MFPB)
26.1.3 Scanner relay board (REYB/SCAN)
26.1.4 DF control board (DFCB)
26.1.5 PC Control board (PCCB)
26.1.6 FS control board (FSCB)
26.1.7 SD drive board (SDDB)
27. RELAY CONNECTOR LAYOUT DRAWING
27.1 Main body
28. TIMING CHART
28.1 Main body
28.1.1 Timing chart when the main power switch is turned ON
28.1.2 Timing chart in color mode
28.2 DF-621
28.2.1 1-sided mode
28.2.2 2-sided mode
28.3 FS-527/SD-509/PK-517
28.3.1 Shift mode
28.3.2 2 flat stitching staples mode
28.3.3 Center staples mode
28.3.4 Punch mode
28.4 JS-603
28.4.1 Tray3 paper exit mode
28.5 FS-529
28.5.1 Shift mode
28.5.2 1 flat stitching staple mode
28.5.3 2 flat stitching staples mode

Number of pages: 1180.