Konica Minolta Bizhub 554e Bizhub 454e Service Manual and Parts List Manual

Service Manual and Parts List Manual Konica Minolta Bizhub 554e Bizhub 454e;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Konica Minolta Bizhub copier.
You can print, zoom or read any diagram, picture or page from this Service Manual and Parts List Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Konica Minolta Bizhub 554e Bizhub 454e photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

Revision history
A) SAFETY AND IMPORTANT WARNING ITEMS
1. IMPORTANT NOTICE
2. DESCRIPTION ITEMS FOR DANGER, WARNING AND CAUTION
2.1 Description items in this Service Manual
2.2 Description items for safety and important warning items
3. SAFETY WARNINGS
3.1 MODIFICATIONS NOT AUTHORIZED BY KONICA MINOLTA, INC
3.1.1 Actions requiring special attention
3.2 POWER PLUG SELECTION
3.2.1 Power Cord Set or Power Plug
3.3 CHECKPOINTS WHEN PERFORMING ON-SITE SERVICE
3.3.1 Power Supply
3.3.2 Installation Requirements
3.3.3 After Service
3.4 FUSE
3.5 Used Batteries Precautions
3.5.1 ALL Areas
3.5.2 Germany
3.5.3 France
3.5.4 Denmark
3.5.5 Finland, Sweden
3.5.6 Norway
3.6 Laser Safety
3.6.1 Laser Safety
3.6.2 Internal Laser Radiation
3.6.3 Laser Safety Label
3.6.4 Laser Caution Label
3.6.5 PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT
4. WARNING INDICATIONS ON THE MACHINE
4.1 Warning indications inside the machine
4.2 Warning indications on the boards
4.2.1 554e
4.2.2 454e
5. MEASURES TO TAKE IN CASE OF AN ACCIDENT

B) NOTATION OF THE CONTENTS
1. PRECAUTION ON HANDLING THIS MANUAL
2. PRODUCT NAME
3. BRAND NAME
3.1 TRADEMARKS OF OTHER COMPANIES
3.2 OWN TRADEMARKS
4. FEEDING DIRECTION

C) PRODUCT SPECIFICATIONS
1. bizhub 554e/454e
1.1 Type
1.2 Functions
1.3 Paper
1.4 Materials
1.4.1 Conditions for defining the life value for the field standard yield
1.5 Print volume
1.6 Machine specifications
1.7 Operating environment
1.8 Print functions
1.9 Scan functions
1.10 Note
2. DF-701
2.1 Type
2.2 Functions
2.3 Paper
2.4 Particular originals
2.5 Prohibited originals
2.6 Mixed original feed chart
2.7 Machine specifications
2.8 Operating environment
2.9 Note
3. PC-110/PC-210
3.1 Type
3.2 Paper
3.3 Machine specifications
3.4 Operating environment
3.5 Note
4. PC-410
4.1 Type
4.2 Paper
4.3 Machine specifications
4.4 Operating environment
4.5 Note
5. LU-204
5.1 Type
5.2 Paper
5.3 Machine specifications
5.4 Operating environment
5.5 Note
6. LU-301
6.1 Type
6.2 Paper
6.3 Machine specifications
6.4 Operating environment
6.5 Note
7. JS-506
7.1 Type
7.2 Functions
7.3 Paper
7.4 Offset function
7.5 Machine specifications
7.6 Operating environment
7.7 Note
8. FS-533
8.1 Type
8.2 Functions
8.3 Paper process ability
8.3.1 Non sort/sort/group
8.3.2 Sort offset/group offset
8.3.3 Sort staple
8.4 Machine specifications
8.5 Operating environment
8.6 Note
9. PK-519
9.1 Type
9.2 Functions
9.3 Paper
9.4 Machine specifications
9.5 Operating environment
9.6 Note
10. FS-534/FS-534SD
10.1 Type
10.2 Functions
10.3 Paper
10.3.1 Non sort/sort/group
10.3.2 Sort offset/group offset
10.3.3 Sort staple
10.4 Machine specifications
10.5 Operating environment
10.6 Note for the Specifications
11. PK-520
11.1 Type
11.2 Functions
11.3 Paper
11.4 Machine specifications
11.5 Operating environment
11.6 Note
12. SD-511
12.1 Type
12.2 Paper
12.2.1 Saddle stitching/folding
12.2.2 Tri-folding
12.3 Machine specifications
12.4 Consumables
12.5 Operating environment
12.6 Note
13. FS-535
13.1 Type
13.2 Functions
13.3 Staple
13.4 Max. paper capacity
13.5 Machine specifications
13.6 Operating environment
13.7 Note
14. PK-521
14.1 Type
14.2 Functions
14.3 Paper
14.4 Machine specifications
14.5 Operating environment
14.6 Note
15. SD-512
15.1 Type
15.2 Paper
15.2.1 Saddle stitching
15.2.2 Folding
15.2.3 Tri-folding
15.3 Machine specifications
15.4 Consumables
15.5 Operating environment
15.6 Note
16. JS-602
16.1 Type
16.2 Functions
16.3 Paper
16.4 Machine specifications
16.5 Operating environment
16.6 Note
17. PI-505
17.1 Type
17.2 Functions
17.3 Paper
17.4 Machine specifications
17.5 Operating environment
17.6 Note
18. ZU-606
18.1 Type
18.2 Functions
18.3 Paper
18.4 Maintenance
18.5 Machine specifications
18.6 Operating environment
18.7 Note
19. i-Option LK-101 v3/102 v2/104 v3/105 v3/106/107/108/110/111
19.1 Available function for i-Option
19.1.1 List of advanced functions
19.1.2 Types of advanced functions
19.1.3 Activation procedures of i-Option
19.2 Web browser function
20. FK-511/508
20.1 Basic specifications
20.1.1 General specifications
20.1.2 Scanning section
20.1.3 Recording section
20.1.4 Line connecting section
20.1.5 Operation panel
20.2 Functional specifications
20.2.1 Dial functions
20.2.2 Transmission
20.2.3 Polling
20.2.4 Line seizure mode and telephone function
20.2.5 Message reception and record
20.2.6 Memory function
20.2.7 Various communication function
20.2.8 User lists / reports
20.2.9 Other user functions
20.3 Network fax specifications
20.3.1 Internet fax
20.3.2 IP address fax

D) OVERALL COMPOSITION
1. SYSTEM CONFIGURATION
1.1 System front view
1.2 System rear view
2. SECTION CONFIGURATION
3. PAPER PATH
4. CONTROL BLOCK DIAGRAM
5. IMAGE CREATION PROCESS
6. IMAGE FORMING CONTROL
7 PROCESS SPEED

E) SERVICE TOOL
1. bizhub C554e/C454e
1.1 Service material list
1.2 CE tool list
1.3 Utility tool
1.3.1 IC card information setting tool of AU-201/AU-202H/SCL-010/YSoft card reader
2. DF-701
2.1 CE tool list

F) PERIODICAL MAINTENANCE
1. Concept of periodical maintenance
2. Periodical maintenance items
2.1 bizhub 554e/454e
2.1.1 bizhub 554e
2.1.2 bizhub 454e
2.1.3 Dual Scan Document Feeder (DF-701)
2.2 Option
2.2.1 PC-110/PC-410
2.2.2 PC-210
2.2.3 LU-204/LU-301
2.2.4 FS-535
2.2.5 SD-512
2.2.6 JS-602
2.2.7 PI-505
2.2.8 ZU-606
2.2.9 FS-534
2.2.10 SD-511
2.2.11 FS-533
3. Periodical replacement parts list
3.1 bizhub 554e/454e
3.2 Option
3.2.1 PC-110
3.2.2 PC-210
3.2.3 PC-410
3.2.4 LU-204
3.2.5 LU-301
3.2.6 FS-535
3.2.7 SD-512
3.2.8 PI-505
3.2.9 ZU-606
3.2.10 FS-534
3.2.11 SD-511
3.2.12 FS-533
4. Periodical cleaning parts list
4.1 Main unit
4.2 FS-535
4.3 SD-512
4.4 JS-602
4.5 PI-505
4.6 ZU-606
4.7 FS-534
4.8 SD-511
4.9 FS-533
5. Concept of parts life
5.1 Life value of consumables and parts
5.1.1 Specified conditions of field standard yield
5.2 Details of the life specifications
6. Periodical maintenance procedure bizhub 554e/454e
6.1 Housing section
6.1.1 Replacing the ozone filter
6.1.2 Replacing the toner filter
6.2 Photo conductor section
6.2.1 Replacing the drum unit
6.3 Charging section
6.3.1 Cleaning of the electrostatic charger comb electrode
6.4 Developing section
6.4.1 Replacing the developing unit
6.5 Toner supply section
6.5.1 Replacing the toner cartridge
6.6 1st transfer section
6.6.1 Cleaning of the image transfer entrance guide
6.6.2 Cleaning of the IDC sensor window
6.6.3 Replacing the transfer belt unit
6.7 2nd transfer/separation section
6.7.1 Replacing the transfer roller unit
6.8 Toner collection section
6.8.1 Replacing the waste toner box
6.8.2 Cleaning of the area around the waste toner collecting port
6.9 Paper feed section
6.9.1 Replacing the tray 1 feed roller, tray 1 pick-up roller, tray 1 separation roller
6.9.2 Replacing the tray 2 feed roller, tray 2 pick-up roller, tray 2 separation roller
6.9.3 Replacing the manual bypass tray feed roller, manual bypass tray separation roller assy
6.10 Registration section
6.10.1 Cleaning of the registration roller
6.11 Fusing section
6.11.1 Replacing the fusing unit (554e)
6.11.2 Replacing the fusing unit (454e)
6.11.3 Cleaning of the IH coil (554e)
6.12 Duplex section
6.12.1 Cleaning of the duplex transport rollers
7. Periodical maintenance procedure DF-701
7.1 Take-up section
7.1.1 Cleaning of the pick-up roller/feed roller
7.1.2 Cleaning of the separation roller
7.1.3 Replacing the pick-up roller/feed roller
7.1.4 Replacing the separation roller assy
7.2 Transport section
7.2.1 Cleaning of the miscellaneous rolls
7.2.2 Cleaning of the miscellaneous rollers
7.3 Scanning section
7.3.1 Cleaning of the front side scanning guide
7.3.2 Cleaning of the reflective sensor section
8. Periodical maintenance procedure PC-210/PC-110
8.1 Paper feed section
8.1.1 Replacing the tray 3 feed roller, tray 3 pick-up roller, tray 3 separation roller
8.1.2 Replacing the tray 4 feed roller, tray 4 pick-up roller, tray 4 separation roller
9. Periodical maintenance procedure PC-410
9.1 Paper feed section
9.1.1 Replacing the feed roller, pick-up roller, separation roller
10. Periodical maintenance procedure LU-204
10.1 Paper feed section
10.1.1 Replacing the pick-up roller
10.1.2 Replacing the feed roller
10.1.3 Replacing the separation roller
11. Periodical maintenance procedure LU-301
11.1 Paper feed section
11.1.1 Replacing the pick-up roller
11.1.2 Replacing the feed roller
11.1.3 Replacing the separation roller
12. Periodical maintenance procedure FS-535
12.1 Paper exit section
12.1.1 Cleaning procedure for each rollers/each rolls
12.1.2 Cleaning of the paddle/3
12.1.3 Replacing the paddle/1 unit, paddle/2 unit
12.1.4 Replacing the paper exit roller/A
13. Periodical maintenance procedure SD-512
13.1 Paper exit section
13.1.1 Cleaning procedure for each rollers/each rolls
13.1.2 Cleaning of the exit tray transport belt
13.1.3 Cleaning of the upper paddle
13.1.4 Cleaning of the lower paddle
13.1.5 Replacing the upper paddle assy
13.1.6 Replacing the lower paddle unit
14. Periodical maintenance procedure JS-602
14.1 Paper exit section
14.1.1 Cleaning of the transport rollers/exit rollers
15. Periodical maintenance procedure PI-505
15.1 Paper feed section
15.1.1 Replacing the pick-up roller /Up and the feed roller /Up
15.1.2 Replacing the pick-up roller /Lw and the feed roller /Lw
15.1.3 Replacing the separation roller /Up and the torque limiter /Up
15.1.4 Replacing the separation roller /Lw and the torque limiter /Lw
16. Periodical maintenance procedure ZU-606
16.1 Punch section
16.1.1 Replacing the punch scraps conveyance motor (M7)
16.1.2 Replacing the punch clutch (CL1)
17. Periodical maintenance procedure FS-534
17.1 Paper exit section
17.1.1 Cleaning procedure for each rollers/each rolls
17.1.2 Cleaning the paddles
17.1.3 Replacing the paddle units
18. Periodical maintenance procedure SD-511
18.1 Paper exit section
18.1.1 Cleaning procedure for each rollers/each rolls
18.1.2 Cleaning the upper paddle
18.1.3 Cleaning the lower paddle
18.1.4 Replacing the upper paddle assy
18.1.5 Replacing the lower paddle unit
19. Periodical maintenance procedure FS-533
19.1 Paper exit section
19.1.1 Cleaning procedure for each parts
19.1.2 Cleaning the paper exit paddle
19.2 Alignment section
19.2.1 Replacing the alignment roller assy F/R

G) DISASSEMBLY/REASSEMBLY
1. Disassembly/adjustment prohibited items
1.1 Paint-locked screws
1.2 Red-painted screws
1.3 Variable resistors on board
1.4 Warnings for disassembly
1.5 Warnings / Precautions during setup or transportation
1.6 Parts not allowed to be removed
1.6.1 ZU-606
2. Units from which removing is prohibited
2.1 CCD unit
2.1.1 Reason for prohibition
2.2 PH unit
2.2.1 Reason for prohibition
2.3 Fusing unit
2.3.1 Reason for prohibition
3. Disassembly/assembly warning/caution items
3.1 Removal/installing of PWBs
3.2 Use a special screw
3.2.1 C554e
3.2.2 C454e
4. Notes when transporting the machine
4.1 Protective materials
4.1.1 Protective materials for the photo conductors
4.1.2 Scanner packing bracket
5. bizhub 554e/454e
5.1 Disassembly/reassembly parts list
5.1.1 Exterior parts
5.1.2 Units
5.1.3 Boards
5.1.4 Motors
5.1.5 Clutches
5.1.6 etc
5.2 Disassembly/reassembly procedure (Exterior parts)
5.2.1 Scanner rear cover
5.2.2 Scanner right cover
5.2.3 Scanner front cover
5.2.4 Scanner left cover
5.2.5 Scanner upper rear cover
5.2.6 Control panel left cover/1
5.2.7 Control panel left cover/2
5.2.8 Control panel right cover
5.2.9 Control panel upper cover
5.2.10 Control panel front cover
5.2.11 Control panel unit
5.2.12 Original glass
5.2.13 Upper front door
5.2.14 Lower front door
5.2.15 Lower front cover
5.2.16 Front cover
5.2.17 Left cover
5.2.18 Paper exit cover
5.2.19 Paper exit rear cover
5.2.20 Rear right cover
5.2.21 Upper right cover
5.2.22 Lower rear cover/1
5.2.23 Lower rear cover/2
5.2.24 DF cable cover
5.2.25 Upper rear cover
5.2.26 Tray 1
5.2.27 Tray 2
5.3 Disassembly/reassembly procedure (Units)
5.3.1 LED exposure unit
5.3.2 Paper feed unit
5.3.3 PH unit
5.3.4 Sub hopper unit
5.3.5 Right door unit
5.3.6 Manual bypass tray unit
5.3.7 Regist unit
5.3.8 Hard disk
5.3.9 How to open the PWB box/1
5.3.10 PWB box/2 (554e)
5.3.11 Main drive unit
5.3.12 Transport unit
5.3.13 IH coil (IHC) (554e)
5.3.14 Fusing drive unit (554e)
5.3.15 Fusing drive unit (454e)
5.3.16 Hopper drive unit (554e)
5.3.17 Hopper drive unit (454e)
5.4 Disassembly/reassembly procedure (Boards)
5.4.1 CCD board (CCDB)
5.4.2 Scanner drive board (SCDB)
5.4.3 LED board (LEDB)
5.4.4 LED control board (LEDCB)
5.4.5 USB board (USBB)
5.4.6 Front side board (FRB)
5.4.7 DC power supply (DCPU)
5.4.8 PH relay board (PHRYB)
5.4.9 Printer control board (PRCB)
5.4.10 SSD board (SSDB)
5.4.11 Memory board/1 (MEMB/1)
5.4.12 MFP board (MFPB)
5.4.13 High voltage unit (HV)
5.4.14 ERP board (ERPB)
5.4.15 Expansion control board (EXCB)
5.4.16 Dual scan image processing board (DSIPB)
5.4.17 IH magnetic erasing board (IHMEB) (554e)
5.4.18 IH power supply (IHPU) (554e)
5.4.19 NF board (NFB) (554e)
5.4.20 Fusing power supply (FUPU) (454e)
5.4.21 Tray 1 FD paper size board (FDPSB/1), tray 2 FD paper size board (FDPSB/2)
5.4.22 Tray 1 CD paper size board (CDPSB/1), tray 2 CD paper size board (CDPSB/2)
5.4.23 Tray 1 empty indicator board (PEIB/1), tray 2 empty indicator board (PEIB/2)
5.5 Disassembly/reassembly procedure (Motors)
5.5.1 Transport motor (M1)
5.5.2 Fusing motor (M3)
5.5.3 Reverse motor (M4)
5.5.4 ADU transport motor (M5)
5.5.5 Toner supply motor/K (M6)
5.5.6 Toner bottle motor (M10) (554e)
5.5.7 Toner bottle motor (M10) (454e)
5.5.8 Fusing pressure motor (M11)
5.5.9 Tray 1 lift-up motor (M12)
5.5.10 Tray 2 lift-up motor (M13)
5.5.11 Paper feed motor (M22)
5.5.12 Tray 2 vertical transport motor (M23)
5.5.13 Registration motor (M24)
5.5.14 Scanner motor (M201)
5.6 Disassembly/reassembly procedure (Clutches)
5.6.1 Tray 2 paper feed clutch (CL1)
5.6.2 Tray 1 paper feed clutch (CL3)
5.6.3 ADU transport clutch (CL6)
5.6.4 Bypass paper feed clutch (CL7)
5.6.5 Paper exit clutch (CL8)
5.7 Disassembly/reassembly procedure (etc.)
5.7.1 Bypass pick-up solenoid (SD1)
5.7.2 IDC sensor shutter solenoid (SD2)
5.7.3 Gate switch solenoid (SD3)
5.7.4 Developing solenoid (SD4)
5.7.5 Bypass CD paper size VR (VR1)
5.7.6 Transfer belt cleaner cooling fan assy
6. DF-701
6.1 Disassembly/reassembly parts list
6.1.1 Exterior parts
6.1.2 Units
6.1.3 Boards and etc
6.1.4 Others
6.2 Disassembly/reassembly procedure (DF-701/SP-501)
6.2.1 Front cover (DF-701)
6.2.2 Rear cover (DF-701)
6.2.3 Left cover unit (DF-701)
6.2.4 Dual scan document feeder (DF-701)
6.2.5 Front side glass cleaning roller unit (DF-701)
6.2.6 Back side glass cleaning roller unit (DF-701)
6.2.7 CIS module (CIS) (DF-701)
6.2.8 DF control board (DFCB) (DF-701)
6.2.9 Document width sensor (VR1) (DF-701)
6.2.10 CIS power supply (CISPU) (DF-701)
6.2.11 Document reading motor (M1) (DF-701)
6.2.12 Document feed motor (M2) (DF-701)
6.2.13 Registration motor (M3) (DF-701)
6.2.14 Reading roller release motor (M4) (DF-701)
6.2.15 CIS cleaning motor (M5) (DF-701)
6.2.16 Document reading glass cleaning motor (M6) (DF-701)
6.2.17 DF cooling fan motor (FM1) (DF-701)
6.2.18 Stamp unit (SP-501)
6.2.19 Stamp (SP-501)
7. Option
7.1 Disassembly/reassembly parts list
7.1.1 KP-101
7.1.2 UK-208
7.1.3 PC-110/PC-210
7.1.4 PC-410
7.1.5 LU-204
7.1.6 LU-301
7.1.7 JS-506
7.1.8 FS-535
7.1.9 PK-521
7.1.10 SD-512
7.1.11 JS-602
7.1.12 PI-505
7.1.13 ZU-606
7.1.14 FS-534
7.1.15 PK-520
7.1.16 SD-511
7.1.17 FS-533
7.1.18 PK-519
7.1.19 FK-508
7.1.20 FK-511
7.1.21 OT-506
7.2 Disassembly/reassembly procedure (KP-101)
7.2.1 Keypad (KP-101)
7.3 Disassembly/reassembly procedure (UK-208)
7.3.1 Upgrade kit (UK-208)
7.4 Disassembly/reassembly procedure (PC-210/PC-110)
7.4.1 Right door (PC-110/PC-210)
7.4.2 Rear right cover (PC-110/PC-210)
7.4.3 Rear cover (PC-110/PC-210)
7.4.4 Tray 3, tray 4, storage box (PC-110/PC-210)
7.4.5 Paper feed cabinet (PC-110/PC-210)
7.4.6 Tray 3 paper feed unit (PC-110/PC-210)
7.4.7 Tray 4 paper feed unit (PC-210)
7.4.8 PC control board (PCCB) (PC-110/PC-210)
7.4.9 Tray 3 paper empty indicator board (PEIB/3), tray 4 paper empty indicator board (PEIB/4) (PC-110/PC-210)
7.4.10 Tray 3 FD paper size board (FDPSB/3), tray 4 FD paper size board (FDPSB/4) (PC-110/PC-210)
7.4.11 Tray 3 CD paper size board (CDPSB/3) (PC-110/PC-210)
7.4.12 Tray 4 CD paper size board (CDPSB/4) (PC-210)
7.4.13 Tray 3 paper feed motor (M111), tray 4 paper feed motor (M121) (PC-110/PC-210)
7.4.14 Tray 3 vertical transport motor (M112), tray 4 vertical transport motor (M122) (PC-110/PC-210)
7.4.15 Tray 3 lift-up motor (M113), tray 4 lift-up motor (M123) (PC-110/PC-210)
7.5 Disassembly/reassembly procedure (PC-410)
7.5.1 Right door (PC-410)
7.5.2 Rear right cover (PC-410)
7.5.3 Rear cover (PC-410)
7.5.4 Paper feed tray (PC-410)
7.5.5 Paper feed cabinet (PC-410)
7.5.6 Paper feed unit (PC-410)
7.5.7 PC control board (PCCB) (PC-410)
7.5.8 Tray 3 paper empty indicator board (PEIB/3) (PC-410)
7.5.9 Paper feed motor (M131) (PC-410)
7.5.10 Vertical transport motor (M132) (PC-410)
7.5.11 Elevator motor (M134) (PC-410)
7.5.12 Shifter motor (M133) (PC-410)
7.5.13 Wire (PC-410)
7.6 Disassembly/reassembly procedure (LU-204)
7.6.1 Large capacity unit (LU-204)
7.6.2 Right cover (LU-204)
7.6.3 Front cover (LU-204)
7.6.4 Rear cover (LU-204)
7.6.5 Feed cover (LU-204)
7.6.6 LU drive board (LUDB) (LU-204)
7.6.7 Lift-up motor (M1) (LU-204)
7.6.8 Paper feed motor (M2) (LU-204)
7.6.9 Transport motor (M3) (LU-204)
7.6.10 Dehumidification heater (DH) (LU-204)
7.6.11 Lift wire (LU-204)
7.7 Disassembly/reassembly procedure (LU-301)
7.7.1 Large capacity unit (LU-301)
7.7.2 Upper door (LU-301)
7.7.3 Right cover (LU-301)
7.7.4 Front cover (LU-301)
7.7.5 Rear cover (LU-301)
7.7.6 Feed cover (LU-301)
7.7.7 Lift wire (LU-301)
7.7.8 LU drive board (LUDB) (LU-301)
7.7.9 Lift-up motor (M1) (LU-301)
7.7.10 Dehumidification heater (DH) (LU-301)
7.8 Disassembly/reassembly procedure (JS-506)
7.8.1 Exit tray 1 (JS-506)
7.8.2 Exit tray 2 (JS-506)
7.8.3 Job separator (JS-506)
7.8.4 Sensor unit (JS-506)
7.8.5 JS control board (JSCB) (JS-506)
7.8.6 Tray shift motor (M1) (JS-506)
7.9 Disassembly/reassembly procedure (FS-535)
7.9.1 Upper cover /1, Upper cover /2, Upper cover /3 (FS-535)
7.9.2 Rear cover (FS-535)
7.9.3 Rear left cover (FS-535)
7.9.4 Front left cover (FS-535)
7.9.5 Upper left cover (FS-535)
7.9.6 Right cover (FS-535)
7.9.7 Main tray (Paper exit lower tray) (FS-535)
7.9.8 Sub tray (Paper exit upper tray) (FS-535)
7.9.9 Finisher (FS-535)
7.9.10 Horizontal transport unit (FS-535)
7.9.11 Stapler unit (FS-535)
7.9.12 FS control board (FSCB) (FS-535)
7.9.13 RU control board (RUCB) (FS-535)
7.9.14 1st transport motor (M1) (FS-535)
7.9.15 2nd transport motor (M2) (FS-535)
7.9.16 Bypass transport motor (M3) (FS-535)
7.9.17 Exit roller motor (M4) (FS-535)
7.9.18 Main tray up/down motor (M5) (FS-535)
7.9.19 Paper output roller motor (M6) (FS-535)
7.9.20 Stacker transport motor (M10) (FS-535)
7.9.21 Alignment plate motor/Fr (M11)/ Alignment plate motor/Rr (M12)/ Trailing edge stopper motor (M19) (FS-535)
7.9.22 Stapler movement motor (M13) (FS-535)
7.9.23 Trailing edge paddle up/down motor (M15) (FS-535)
7.9.24 Paddle motor (M16) (FS-535)
7.9.25 Stacker plate motor (M17) (FS-535)
7.9.26 Leading edge paddle up/down motor (M18) (FS-535)
7.9.27 RU transport motor (M35) (FS-535)
7.9.28 Center staple switching gate solenoid (SD1) (FS-535)
7.9.29 Bypass switching gate solenoid (SD2) (FS-535)
7.9.30 Sub tray switching gate solenoid (SD3) (FS-535)
7.9.31 Switchback gate solenoid (SD4) (FS-535)
7.9.32 Sub tray paper exit route (FS-535)
7.9.33 Lift wire (FS-535)
7.9.34 Drive belt (FS-535)
7.9.35 Paddle/3 (FS-535)
7.10 Disassembly/reassembly procedure (PK-521)
7.10.1 Punch kit (PK-521)
7.10.2 Punch oscillating motor (M302) (PK-521)
7.10.3 Paper size detect board (PSDTB) (PK-521)
7.11 Disassembly/reassembly procedure (SD-512)
7.11.1 Front cover (SD-512)
7.11.2 Saddle unit (SD-512)
7.11.3 Paper exit tray (SD-512)
7.11.4 Staple unit (SD-512)
7.11.5 SD drive board (SDDB) (SD-512)
7.11.6 SD transport motor (M1) (SD-512)
7.11.7 Paper receiving guide control motor (M2) (SD-512)
7.11.8 Alignment motor (M3) (SD-512)
7.11.9 Stopper drive motor (M4) (SD-512)
7.11.10 Center fold roller motor (M5) (SD-512)
7.11.11 Tri-fold guide motor (M6) (SD-512)
7.11.12 SD paddle motor (M7) (SD-512)
7.11.13 Center fold change motor (M8) (SD-512)
7.11.14 Center fold knife motor (M9) (SD-512)
7.11.15 Paper transport belt motor (M34) (SD-512)
7.11.16 Stopper solenoid (SD1) (SD-512)
7.12 Disassembly/reassembly procedure (JS-602)
7.12.1 Separator (JS-602)
7.12.2 Front cover (JS-602)
7.12.3 Rear cover (JS-602)
7.12.4 3rd entrance switching solenoid (SD404) (JS-602)
7.13 Disassembly/reassembly procedure (PI-505)
7.13.1 Upper cover (PI-505)
7.13.2 Rear cover (PI-505)
7.13.3 Operation panel cover assy (PI-505)
7.13.4 Post inserter (PI-505)
7.13.5 PI drive board (PIDB) (PI-505)
7.13.6 PI control board (PIOB) (PI-505)
7.14 Disassembly/reassembly procedure (ZU-606)
7.14.1 Rear cover (ZU-606)
7.14.2 Upper cover (ZU-606)
7.14.3 Right cover (ZU-606)
7.14.4 Front cover (ZU-606)
7.14.5 Z folding unit (ZU-606)
7.14.6 Punch unit (ZU-606)
7.14.7 Z folding/conveyance unit (ZU-606)
7.14.8 Punch motor (M4) (ZU-606)
7.14.9 Main motor (M6) (ZU-606)
7.14.10 Registration motor (M1) (ZU-606)
7.14.11 Punch shift motor (M5) (ZU-606)
7.14.12 Main motor cooling fan (FM1) (ZU-606)
7.14.13 ZU control board (ZUCB) (ZU-606)
7.14.14 Paper size detect board (PSDTB) (ZU-606)
7.15 Disassembly/reassembly procedure (FS-534)
7.15.1 Rear cover (FS-534)
7.15.2 Front door (FS-534)
7.15.3 Front upper cover (FS-534)
7.15.4 Finisher (FS-534)
7.15.5 Horizontal transport unit (FS-534)
7.15.6 Stapler unit (FS-534)
7.15.7 Sensor unit (FS-534)
7.15.8 FS control board (FSCB) (FS-534)
7.15.9 RU transport motor (M1) (FS-534)
7.15.10 FNS entry transport motor (M2) (FS-534)
7.15.11 FNS discharge motor (M3) (FS-534)
7.15.12 Receving roller retraction motor (M4) (FS-534)
7.15.13 FNS paddle motor (M5) (FS-534)
7.15.14 Trailing edge stopper motor (M6) (FS-534)
7.15.15 Alignment motor/front (M7) (FS-534)
7.15.16 Alignment motor/rear (M8) (FS-534)
7.15.17 Pre-eject drive motor (M9) (FS-534)
7.15.18 Bundle eject motor (M10) (FS-534)
7.15.19 Main tray up/down motor (M11) (FS-534)
7.15.20 Paper receiving control motor (M12) (FS-534)
7.15.21 Side stapler movement motor (M13) (FS-534)
7.16 Disassembly/reassembly procedure (PK-520)
7.16.1 Punch kit (PK-520)
7.17 Disassembly/reassembly procedure (SD-511)
7.17.1 Front cover (SD-511)
7.17.2 Saddle unit (SD-511)
7.17.3 Paper exit tray (SD-511)
7.17.4 Staple unit (SD-511)
7.17.5 SD drive board (SDDB) (SD-511)
7.17.6 SD transport motor (M1) (SD-511)
7.17.7 Paper discharge control motor (M2) (SD-511)
7.17.8 Alignment motor (M3) (SD-511)
7.17.9 Stopper drive motor (M4) (SD-511)
7.17.10 Center fold roller motor (M5) (SD-511)
7.17.11 Tri-folding guide motor (M6) (SD-511)
7.17.12 SD paddle motor (M7) (SD-511)
7.17.13 Center fold guide motor (M8) (SD-511)
7.17.14 Center fold knife motor (M9) (SD-511)
7.17.15 Stopper solenoid (SD1) (SD-511)
7.18 Disassembly/reassembly procedure (FS-533)
7.18.1 Front cover (FS-533)
7.18.2 Upper cover (FS-533)
7.18.3 Rear cover (FS-533)
7.18.4 Finisher (FS-533)
7.18.5 Stapler unit (FS-533)
7.18.6 Paper exit tray unit (FS-533)
7.18.7 FS control board (FSCB) (FS-533)
7.18.8 Stapler relay board (STREYB) (FS-533)
7.18.9 Paper conveyance motor (M101) (FS-533)
7.18.10 Paper exit motor (M102) (FS-533)
7.18.11 Alignment roller motor (M103) (FS-533)
7.18.12 Exit roller lift up motor (M104) (FS-533)
7.18.13 Alignment motor/F (M105), Alignment motor/R (M106) (FS-533)
7.18.14 Stapler movement motor (M107) (FS-533)
7.18.15 Tray lift up motor (M109) (FS-533)
7.18.16 Paper surface detect solenoid (SD101) (FS-533)
7.18.17 Batch solenoid (SD102) (FS-533)
7.18.18 Paper exit roller solenoid (SD103) (FS-533)
7.18.19 Paper exit paddle (FS-533)
7.19 Disassembly/reassembly procedure (PK-519)
7.19.1 Punch kit (PK-519)
7.19.2 PK control board (PKCB) (PK-519)
7.19.3 Punch motor (M201) (PK-519)
7.20 Disassembly/reassembly procedure (FK-508)
7.20.1 FAX board (line 3), FAX board (line 4) (FK-508)
7.21 Disassembly/reassembly procedure (FK-511)
7.21.1 FAX Kit (Line1), FAX Kit (Line2) (FK-511)
7.21.2 FAX Kit (Line1), FAX Kit (Line2) (FK-511) (with MK-728)
7.22 Disassembly/reassembly procedure (OT-506)
7.22.1 Exit tray
8. COMMERCIALLY AVAILABLE PARTS
8.1 Installing the key counter
8.1.1 Configuration
8.1.2 Procedure
8.2 Installing the original size detection sensor/2 (PS205)
8.2.1 Procedure

H) CLEANING/LUBRICATION
1. bizhub 554e/454e
1.1 Cleaning parts list
1.2 Lubrication parts list
1.3 Cleaning procedure
1.3.1 Transfer belt unit
1.3.2 PH window
1.3.3 Tray 1 feed roller, tray 1 pick-up roller, tray 1 separation roller
1.3.4 Tray 2 feed roller, tray 2 pick-up roller, tray 2 separation roller
1.3.5 Tray 2 transport roller
1.3.6 Manual bypass tray feed roller
1.3.7 Manual bypass tray separation roller
1.3.8 Original glass
1.3.9 Scanner rails
1.3.10 Mirrors
1.3.11 Lens
1.3.12 CCD sensor
2. DF-701
2.1 Cleaning parts list
2.2 Cleaning procedure
2.2.1 Back side scanning glass
2.2.2 Back side scanning guide/Back side scanning shading shaft
3. Option
3.1 Cleaning parts list
3.1.1 PC-110/PC-210
3.1.2 PC-410
3.1.3 LU-204
3.1.4 LU-301
3.1.5 FS-535
3.1.6 PI-505
3.2 Cleaning procedure (PC-110/PC-210)
3.2.1 Tray 3 feed roller, tray 3 pick-up roller, tray 3 separation roller
3.2.2 Tray 4 feed roller, tray 4 pick-up roller, tray 4 separation roller
3.2.3 Tray 3 vertical transport roller, tray 4 vertical transport roller
3.3 Cleaning procedure (PC-410)
3.3.1 Feed roller, Pick-up roller, Separation roller
3.3.2 Vertical transport roller
3.4 Cleaning procedure (LU-204)
3.4.1 Pick-up roller
3.4.2 Feed roller
3.4.3 Separation roller
3.4.4 Transport roller
3.5 Cleaning procedure (LU-301)
3.5.1 Pick-up roller
3.5.2 Feed roller
3.5.3 Separation roller
3.5.4 Transport roller
3.6 Cleaning procedure (FS-535)
3.6.1 Paddle/1, Paddle/2
3.7 Cleaning procedure (PI-505)
3.7.1 Pick-up roller /Up, feed roller /Up, separationroller /Up
3.7.2 Pick-up roller /Lw, feed roller /Lw, separationroller /Lw
3.7.3 Transport roller /Up
3.7.4 Transport roller /Lw

I) ADJUSTMENT/SETTING
1. POINT TO CHECK
1.1 How To Use The Adjustment/Setting Section
1.1.1 Outline
1.1.2 Advance checks
1.2 Operating The Touch Panel
1.2.1 Precautions for Using the Touch Panel
1.2.2 Operating the Touch Panel
1.2.3 Operation of Keypad
1.2.4 Switching the Entry or Selection Screen
2. ACCESSIBILITY
Accessibility
2.1 Touch Panel Adjustment
2.1.1 Use
2.1.2 Procedure
2.2 Brightness Adjustment
2.2.1 Procedure
2.3 Key Repeat Start/Interval Time
2.3.1 Time To Start
2.3.2 Interval
2.4 System Auto Reset Confirmation
2.4.1 Use
2.4.2 Default setting
2.4.3 Setting item
2.5 Auto Reset Confirmation
2.5.1 Use
2.5.2 Default setting
2.5.3 Setting item
2.6 Enlarge Display Mode Confirmation
2.6.1 Use
2.6.2 Default setting
2.6.3 Setting item
2.7 Message Display Time
2.7.1 Use
2.7.2 Default setting
2.7.3 Setting item
2.8 Sound Setting
2.8.1 Sound Setting
2.8.2 Sound Type/Volume Setting
2.9 Default Enlarge Display Settings
2.9.1 Use
2.9.2 Procedure
2.10 Voice Guidance Settings
2.10.1 Voice Guidance Settings
2.10.2 Volume
2.10.3 Voice Speed
2.11 Double Tap Interval Settings
2.11.1 Procedure
3. COUNTER
Counter
3.1 Meter Count
3.1.1 Meter Count
3.1.2 Copy
3.1.3 Print
3.1.4 Scan/Fax
3.1.5 Other
3.1.6 Print List
3.1.7 Coverage Rate
3.1.8 Eco Info
3.2 Display Keypad
3.2.1 Use
4. UTILITY
4.1 List of utility mode (outline)
4.2 List of utility mode (detail)
4.2.1 One-Touch/User Box Registration
4.2.2 User Settings
4.2.3 Administrator Settings
4.2.4 Other Settings
4.3 Starting/Exiting
4.3.1 Starting procedure
4.3.2 Exiting procedure
5. UTILITY (ONE-TOUCH/USER BOX REGISTRATION)
One-Touch User Box Registration-Outline
5.1 Create One-Touch Destination
5.1.1 Address Book (Public)/(Personal)
5.1.2 Group
5.1.3 E-Mail Settings
5.2 Create User Box
5.2.1 Public/Personal User Box
5.2.2 Bulletin Board User Box
5.2.3 Relay User Box
5.3 Limiting Access to Destinations
5.3.1 Apply Levels/Groups to Destinations
6. UTILITY (USER SETTINGS)
6.1 System Settings
6.1.1 Language Selection
6.1.2 Language Selection-Panel Keyboard Language Selection
6.1.3 Language Selection-External Keyboard Language Selection
6.1.4 Select Keyboard
6.1.5 Measurement Unit Settings
6.1.6 Paper Tray Settings
6.1.7 Auto Color Level Adjust
6.1.8 Power Supply/Power Save Settings
6.1.9 Output Settings
6.1.10 AE Level Adjustment
6.1.11 Auto Paper Select for Small Original
6.1.12 Blank Page Print Settings
6.1.13 Page Number Print Position
6.1.14 Blank Sheet Detection Level
6.1.15 Separate Scan from Platen
6.2 Custom Display Settings
6.2.1 Copier Settings
6.2.2 Scan/Fax Settings
6.2.3 User Box Settings
6.2.4 Function Display Key (Copy/Print)
6.2.5 Function Display Key (Send/Save)
6.2.6 Default Application Screen Type Setting
6.2.7 Copy Screen
6.2.8 Fax Active Screen
6.2.9 Animation Settings
6.2.10 Search Option Settings
6.3 Copier Settings
6.3.1 Auto Booklet Selection for Saddle Stitching
6.3.2 Auto Zoom for Combine/Booklet
6.3.3 Booklet Short Cut Mode
6.3.4 Auto Sort/Group Selection
6.3.5 Default Copy Settings
6.3.6 Default Enlarge Display Settings
6.3.7 When AMS Direction is Incorrect
6.3.8 Separate Scan Output Method
6.3.9 Enlargement Rotation
6.3.10 Auto Zoom (Platen)
6.3.11 Auto Zoom (ADF)
6.3.12 Specify Default Tray when APS Off
6.3.13 Select Tray for Insert Sheet
6.3.14 Tri-Fold Print Side
6.3.15 Print Jobs During Copy Operation
6.3.16 Automatic Image Rotation
6.3.17 Finishing Program
6.3.18 Card Shot Settings
6.4 Scan/Fax Settings
6.4.1 JPEG Compression Level
6.4.2 Black Compression Level
6.4.3 TWAIN Lock Time
6.4.4 Default Scan/Fax Settings
6.4.5 Default Enlarge Display Settings
6.4.6 Compact PDF/XPS Compression Level
6.4.7 Color TIFF Type
6.4.8 OCR Operation Setting
6.4.9 Graphic Outlining
6.4.10 Auto Rename Function
6.5 Printer Settings
6.5.1 Basic Settings
6.5.2 Paper Setting
6.5.3 PCL Settings
6.5.4 PS Setting
6.5.5 Security Settings
6.5.6 OOXML Print Settings
6.5.7 Layout – Combination
6.5.8 Print Reports
6.5.9 TIFF Image Paper Setting
6.6 Change Password
6.6.1 Use
6.6.2 Procedure
6.7 Change E-Mail Address
6.7.1 Use
6.7.2 Procedure
6.8 Register Authentication Settings
6.8.1 Use
6.9 Synchronize User Auth. and Account Track
6.9.1 Use
6.9.2 Default setting
6.9.3 Setting item
6.10 Cellular Phone/PDA Setting
6.10.1 Link File Error Notification
6.10.2 Proxy Server Use
6.10.3 Print
7. UTILITY (ADMINISTRATOR SETTINGS)
Administrator Settings-Outline
7.1 System Settings-Power Supply/Power Save Settings
7.1.1 Low Power Mode Settings
7.1.2 Sleep Mode Settings
7.1.3 Power Key Setting
7.1.4 Power Save Settings
7.1.5 Enter Power Save Mode
7.1.6 Power Consumption in Sleep Mode
7.1.7 Power Saving Fax/Scan
7.1.8 Awake from Power Save Mode by Touching Control Panel
7.2 System Settings-Output Settings
7.2.1 Print/Fax Output Settings
7.2.2 Output Tray Settings
7.2.3 Shift Output Each Job
7.3 System Settings-Date/Time Settings
7.3.1 Use
7.3.2 Procedure
7.4 System Settings-Daylight Saving Time
7.4.1 Enable Settings
7.4.2 Start/End Settings
7.5 System Settings-Weekly Timer Settings
7.5.1 Weekly Timer ON/OFF Settings
7.5.2 Time Settings
7.5.3 Date Settings
7.5.4 Select Time for Power Save
7.5.5 Password for Non-Business Hours
7.5.6 Tracking Function Settings
7.5.7 Display ON/OFF Time
7.6 System Settings-Restrict User Access
7.6.1 Restrict Program Function Setting
7.6.2 Copy Program Lock Settings
7.6.3 Delete Saved Copy Program
7.6.4 Restrict Access to Job Settings
7.6.5 Restrict Operation
7.7 System Settings-Expert Adjustment
7.7.1 AE Level Adjustment
7.7.2 Printer Adjustment-Leading Edge Adjustment
7.7.3 Printer Adjustment-Centering
7.7.4 Printer Adjustment-Leading Edge Adjustment (Duplex Side 2)
7.7.5 Printer Adjustment-Centering (Duplex 2nd Side)
7.7.6 Printer Adjustment-Erase Leading Edge
7.7.7 Printer Adjustment-Vertical Adjustment
7.7.8 Printer Adjustment-Media Adjustment
7.7.9 Finisher Adjustment-Center Staple Position
7.7.10 Finisher Adjustment-Half-Fold Position
7.7.11 Finisher Adjustment-1st Tri-Fold Position Adjustment/2nd Tri-Fold Position Adjustment
7.7.12 Finisher Adjustment-Tri-Fold Output Setting
7.7.13 Finisher Adjustment-Punch Vertical Position Adjustment
7.7.14 Finisher Adjustment-Punch Horizontal Position Adjustment
7.7.15 Finisher Adjustment-Paper Alignment Plate Settings
7.7.16 Finisher Adjustment-Punch Regist Loop Size Adjustment
7.7.17 Finisher Adjustment-Punch Edge Sensor Adjustment
7.7.18 Finisher Adjustment-Vertical Punch (Z-Fold) Position Adjustment
7.7.19 Finisher Adjustment-Horizontal Punch (Z-Fold) Position Adjustment
7.7.20 Finisher Adjustment-1st Z-Fold Position Adjustment/2nd Z-Fold Position Adjustment
7.7.21 Finisher Adjustment-Punch Unit Size Detect Sensor
7.7.22 Finisher Adjustment-Post Inserter Tray Size Adjustment
7.7.23 Density Adjustment
7.7.24 Image Stabilization
7.7.25 Paper Separation Adjustment
7.7.26 Gradation Adjustment
7.7.27 Scanner Area
7.7.28 Scanner Area-Scanner Adjustment: Leading Edge
7.7.29 Scanner Area-Scanner Adjustment: Centering
7.7.30 Scanner Area-Horizontal Adjustment
7.7.31 Scanner Area-Vertical Adjustment
7.7.32 ADF Adjustment
7.7.33 Line Detection-Prior Detection Setting (Front Side, Back Side)
7.7.34 Line Detection-Feed Cleaning Settings
7.7.35 Trail Edge Adjust
7.7.36 User Paper Settings
7.7.37 Erase Adjustment-Non-Image Area Erase Operation Settings
7.7.38 PS Designer Settings
7.8 System Settings-List/Counter
7.8.1 Management List
7.8.2 Paper Size/Type Counter
7.8.3 Meter Counter List
7.8.4 Check Consumables List
7.8.5 Transmission Meter Count and Device Information
7.8.6 TX Operation Log Output
7.9 System Settings-Reset Settings
7.9.1 System Auto Reset
7.9.2 Auto Reset
7.9.3 Job Reset
7.10 System Settings-User Box Settings
7.10.1 Delete Unused User Box
7.10.2 Delete Secure Print Documents
7.10.3 Auto Delete Secure Document
7.10.4 Encrypted PDF Delete Time
7.10.5 ID & Print Delete Time
7.10.6 Document Hold Setting
7.10.7 External Memory Function Settings
7.10.8 Allow/Restrict User Box
7.10.9 ID & Print Delete after Print Setting
7.10.10 Document Delete Time Setting
7.10.11 Document in MFP Shared Folder Delete Time Setting
7.11 System Settings-Standard Size Setting
7.11.1 Original Glass Original Size Detect
7.11.2 81/2 – 14/Foolscap Size Detection
7.11.3 Foolscap Size Setting
7.11.4 ADF Size Detection
7.12 System Settings-Stamp Settings
7.12.1 Header/Footer Settings
7.12.2 Fax TX Settings
7.13 System Settings-Blank Page Print Settings
7.13.1 Use
7.13.2 Default setting
7.13.3 Setting item
7.14 System Settings-Registered Key Settings
7.14.1 Use
7.14.2 Procedure
7.15 System Settings-Job Priority Operation Settings
7.15.1 Fax RX Job Priority
7.15.2 Skip Job (Fax)
7.15.3 Skip Job (Copy, Print)
7.16 System Settings-Default Bypass Paper Type Setting
7.16.1 Use
7.16.2 Procedure
7.17 System Settings-Page Number Print Position
7.17.1 Use
7.17.2 Procedure
7.18 System Settings-Preview Settings
7.18.1 Original Direction Confirmation Screen
7.18.2 Realtime Preview
7.18.3 Preview Display Conditions (Standard Application)
7.18.4 Preview Display Conditions (Registered Application)
7.19 System Settings-Enlarge Display Settings
7.19.1 Display Default Setting
7.19.2 Apply Basic Setting to Enlarge Display
7.20 System Settings-Scan File Name Settings
7.20.1 Function Mode Initial
7.20.2 Supplementary File Name
7.21 System Settings-PDF Settings
PDF Settings
7.21.1 PDF/A Default Settings
7.21.2 PDF Web Optimization Default Settings
7.21.3 Searchable PDF Settings
7.22 System Settings-Set Paper Name by User
7.22.1 Set Paper Name by User
7.23 System Settings-Custom Display Settings
7.23.1 Main Menu Default Settings
7.23.2 Main Menu Display Settings
7.23.3 Custom Function Pattern Selection
7.23.4 User/Admin Function Permissions
7.23.5 Function Display Key Permission Setting-Copy/Print
7.23.6 Function Display Key Permission Setting-Send/Save
7.23.7 Temporary Change Language Setting
7.23.8 Display 10 Keypad when entering Number of Sets
7.24 Administrator/Machine Settings
7.24.1 Administrator Registration
7.24.2 Input Machine Address
7.25 One-Touch/User Box Registration-Create One-Touch Destination
7.25.1 Address Book (Public)/(Personal)
7.25.2 Group
7.25.3 E-Mail Settings
7.26 One-Touch/User Box Registration-Create User Box
7.26.1 Public/Personal User Box
7.26.2 Bulletin Board User Box
7.26.3 Relay User Box
7.26.4 Annotation User Box
7.27 One-Touch/User Box Registration-One-Touch/User Box Registration List
7.27.1 Address Book List
7.27.2 Group List
7.27.3 Program List
7.27.4 E-Mail Subject/Text List
7.28 One-Touch/User Box Registration-Maximum Number of User Boxes
7.28.1 Use
7.28.2 Procedure
7.29 User Authentication/Account Track-General Settings
7.29.1 User Authentication
7.29.2 Public User Access
7.29.3 Prohibited Function Login Setting
7.29.4 Account Track
7.29.5 Account Track Input Method
7.29.6 Synchronize User Authentication & Account Track
7.29.7 When # of Jobs Reach Maximum
7.29.8 Number of User Counters Assigned
7.29.9 Ticket Hold Time Setting
7.29.10 LDAP-IC Card Authentication Setting
7.30 User Authentication/Account Track-User Authentication Settings
7.30.1 Administrative Settings
7.30.2 User Registration
7.30.3 User Counter
7.31 User Authentication/Account Track-Account Track Settings
7.31.1 Account Track Registration
7.31.2 Account Track Counter
7.32 User Authentication/Account Track-Print without Authentication
7.32.1 Use
7.32.2 Default setting
7.32.3 Setting item
7.33 User Authentication/Account Track-Print Counter List
7.33.1 Use
7.33.2 Procedure
7.34 User Authentication/Account Track-External Server Settings
7.34.1 External Server Settings
7.35 User Authentication/Account Track-Limiting Access to Destinations
7.35.1 Create Group
7.35.2 Apply Levels/Groups to Destinations
7.35.3 Apply Levels/Groups to Users
7.36 User Authentication/Account Track-Authentication Device Settings
7.36.1 General Settings
7.36.2 Logoff Settings
7.37 User Authentication/Account Track-User/Account Common Setting
7.37.1 Logout Confirmation Screen Display Setting
7.37.2 Counter Remote Control
7.38 User Authentication/Account Track-Scan to Home Settings
7.38.1 Use
7.38.2 Default setting
7.38.3 Setting item
7.39 User Authentication/Account Track-Scan to Authorized Folder Settings
7.39.1 Use
7.39.2 Default setting
7.39.3 Setting item
7.40 User Authentication/Account Track-Print Simple Auth
7.40.1 Authentication Setting
7.40.2 Register Authentication Server
7.41 User Authentication/Account Track – Max. Allowance when Enhanced Server down
7.41.1 Use
7.41.2 Default setting
7.41.3 Setting item
7.42 User Authentication/Account Track – Update Billing Information
7.42.1 Use
7.42.2 Default setting
7.42.3 Setting item
7.43 Network Settings-TCP/IP Settings
7.43.1 TCP/IP Settings
7.43.2 IPv4 Settings
7.43.3 IPv6 Settings
7.43.4 DNS Host
7.43.5 DNS Domain
7.43.6 DNS Server Settings (IPv4)
7.43.7 DNS Server Settings (IPv6)
7.43.8 IPsec Settings
7.43.9 IPsec Settings-IKE Settings-IKEv1 Settings
7.43.10 IPsec Settings-IKE Settings-IKEv2 Settings
7.43.11 IPsec Settings-IPsec Settings-IPsec SA Settings
7.43.12 IPsec Settings-IPsec Settings-Peer
7.43.13 IPsec Settings-IPsec Settings-Protocol Setting
7.43.14 IPsec Settings-Enable IPsec
7.43.15 IPsec Settings-Communication Check
7.43.16 IP Filtering (Permit Access)
7.43.17 IP Filtering (Deny Access)
7.43.18 RAW Port Number
7.43.19 LLMNR Setting
7.44 Network Settings-NetWare Settings
7.44.1 IPX Settings
7.44.2 NetWare Print Settings
7.44.3 PServer Settings: Print Server Name/Print Server Password
7.44.4 PServer Settings: Polling Interval
7.44.5 PServer Settings: NDS/Bindery Setting
7.44.6 PServer Settings: File Server Name
7.44.7 PServer Settings: NDS Context Name
7.44.8 PServer Settings: NDS Tree Name
7.44.9 Nprinter/Rprinter Settings: Print Server Name
7.44.10 Nprinter/Rprinter Settings: Printer Number
7.44.11 User Authentication Setting (NDS)
7.45 Network Settings-HTTP Server Settings
7.45.1 HTTP Server Settings
7.45.2 PSWC Settings
7.45.3 IPP Settings
7.45.4 Accept IPP Jobs
7.45.5 Support Information
7.45.6 Printer Information
7.45.7 IPP Authentication Settings
7.45.8 General Settings
7.45.9 User Name
7.45.10 Password
7.45.11 realm
7.46 Network Settings-FTP Settings
7.46.1 FTP TX Settings
7.46.2 FTP TX Settings: Proxy Server Address
7.46.3 FTP TX Settings: Proxy Server Port Number
7.46.4 FTP TX Settings: Port No
7.46.5 FTP TX Settings: Connection Timeout
7.46.6 FTP Server Settings
7.46.7 FTP Server Settings-Deny Reception Command
7.46.8 FTP Server Settings-PORT Command Enhanced Security
7.47 Network Settings-SMB Settings
SMB Setting
7.47.1 Client Settings
7.47.2 SMB Server Settings
7.47.3 WINS/NetBIOS Settings
7.47.4 WINS/NetBIOS Settings: Automatic Retrieval Settings
7.47.5 WINS/NetBIOS Settings: WINS Server Address1, 2
7.47.6 WINS/NetBIOS Settings: Node Type Setting
7.47.7 Direct Hosting Setting
7.48 Network Settings-LDAP Settings
7.48.1 Enabling LDAP
7.48.2 Setting Up LDAP
7.48.3 Setting Up LDAP-LDAP Server Name
7.48.4 Setting Up LDAP-Max. Search Results
7.48.5 Setting Up LDAP-Timeout
7.48.6 Setting Up LDAP-Initial Setting for Search Details
7.48.7 Setting Up LDAP-Change Search Attribute
7.48.8 Setting Up LDAP-Search
7.48.9 Setting Up LDAP-Check Connection
7.48.10 Setting Up LDAP-Reset All Settings
7.48.11 Setting Up LDAP-Server Address
7.48.12 Setting Up LDAP-Search Base
7.48.13 Setting Up LDAP-SSL Setting
7.48.14 Setting Up LDAP-Port Number
7.48.15 Setting Up LDAP-Port Number (SSL)
7.48.16 Setting Up LDAP-Certificate Verification Level Settings
7.48.17 Setting Up LDAP-Authentication Type
7.48.18 Setting Up LDAP-Select Server Authentication Method
7.48.19 Setting Up LDAP-Referral Setting
7.48.20 Setting Up LDAP-Login Name
7.48.21 Setting Up LDAP-Password
7.48.22 Setting Up LDAP-Domain Name
7.48.23 Setting Up LDAP-Search Attributes Authentication
7.48.24 Setting Up LDAP-Search Attribute(s)
7.48.25 Default LDAP Server Setting
7.48.26 Default Search Result Display Setting
7.49 Network Settings-E-Mail Settings-E-Mail TX (SMTP)
7.49.1 E-Mail TX (SMTP)
7.49.2 Scan to E-mail
7.49.3 Status Notification
7.49.4 Total Counter Notification
7.49.5 SMTP Server Address
7.49.6 Binary Division
7.49.7 Divided Mail Size
7.49.8 Connection Timeout
7.49.9 Server Capacity
7.49.10 SSL/TLS Settings
7.49.11 Port No
7.49.12 Port Number (SSL)
7.49.13 Certificate Verification Level Settings
7.49.14 Detail Settings: SMTP Authentication
7.49.15 Detail Settings: POP Before SMTP Authentication
7.49.16 Detail Settings: POP Before SMTP Time
7.50 Network Settings-E-Mail Settings-E-Mail RX (POP)
7.50.1 E-Mail RX (POP)
7.50.2 POP Server Address
7.50.3 Connection Timeout
7.50.4 SSL Setting
7.50.5 Port No
7.50.6 Port Number (SSL)
7.50.7 Certificate Verification Level Settings
7.50.8 Login Name
7.50.9 Password
7.50.10 APOP Authentication
7.50.11 Check for New Messages
7.50.12 Polling Interval
7.51 Network Settings-E-Mail Settings-E-Mail RX Print
7.51.1 E-mail RX Print
7.51.2 E-mail RX Permission
7.51.3 Save in User Box
7.51.4 E-Mail Body Print
7.52 Network Settings-E-Mail Settings-S/MIME Communication Settings
7.52.1 S/MIME Communication Settings
7.52.2 Digital Signature
7.52.3 E-Mail Text Encryption Method
7.52.4 Print S/MIME Information
7.52.5 Automatically Obtain Certificates
7.52.6 Certificate Verification Level Settings
7.52.7 Digital Signature Type
7.53 Network Settings-SNMP Settings
7.53.1 SNMP Settings
7.53.2 UDP Port Number
7.53.3 SNMP v1/v2c Settings
7.53.4 SNMP v3 Settings
7.53.5 TRAP Setting
7.53.6 TRAP Setting When Authentication Failed
7.54 Network Settings-AppleTalk Settings
7.54.1 AppleTalk Settings
7.54.2 Printer Name
7.54.3 Zone Name
7.54.4 Current Zone
7.55 Network Settings-Bonjour Setting
7.55.1 Bonjour Setting
7.55.2 Bonjour Name
7.56 Network Settings-TCP Socket Settings
7.56.1 TCP Socket
7.56.2 TCP Socket (ASCII Mode)
7.57 Network Settings-Network Fax Settings
7.57.1 Network Fax Function Settings
7.57.2 SMTP TX Settings
7.57.3 SMTP RX Settings
7.58 Network Settings-WebDAV Settings-WebDAV Client Settings
7.58.1 WebDAV Client Setting
7.58.2 Proxy Server Address
7.58.3 Proxy Server Port Number
7.58.4 User Name
7.58.5 Password
7.58.6 Chunk Transmission
7.58.7 Connection Timeout
7.58.8 Server Auth. Character Code
7.58.9 Certificate Verification Level Settings
7.59 Network Settings-WebDAV Settings-WebDAV Server Settings
7.59.1 WebDAV Server Settings
7.59.2 SSL Setting
7.59.3 Password Setting
7.60 Network Settings-WebDAV Settings-Proxy Setting for Remote Access
7.60.1 Proxy Setting for Remote Access
7.61 Network Settings-DPWS Settings-DPWS Common Settings
7.61.1 Friendly Name
7.61.2 Publication Service
7.61.3 Enable SSL
7.61.4 Certificate Verification Level Settings
7.62 Network Settings-DPWS Settings-DPWS Extension Settings
DPWS Extension Settings
7.62.1 Enable Proxy
7.62.2 Register Proxy
7.63 Network Settings-DPWS Settings-Printer Settings
7.63.1 Printer Settings
7.63.2 Printer Name
7.63.3 Printer Location
7.63.4 Printer Information
7.64 Network Settings-DPWS Settings-Scanner Settings
7.64.1 Scanner Settings
7.64.2 Scanner Name
7.64.3 Scanner Location
7.64.4 Scanner Information
7.64.5 Connection Timeout
7.65 Network Settings-Distributed Scan Settings
7.65.1 Distributed Scan Settings
7.66 Network Settings-ThinPrint Setting
7.66.1 ThinPrint Setting
7.66.2 Port Number
7.66.3 Data Size before Compression
7.66.4 Connection Timeout
7.66.5 Printer Name/Printer Class Name
7.66.6 Certificate Verification Level Settings
7.66.7 Connection Service Setting
7.66.8 Checking Connection Service Setting
7.67 Network Settings-Detail Settings-Device Setting
7.67.1 MAC Address
7.67.2 Network Speed
7.67.3 LLTD Setting
7.68 Network Settings-Detail Settings-Time Adjustment Setting
7.68.1 Time Adjustment Setting
7.68.2 Auto IPv6 Retrieval
7.68.3 NTP Server Setting
7.68.4 Auto Time Adjustment
7.68.5 Polling Interval
7.69 Network Settings-Detail Settings-Status Notification Setting
7.69.1 Register Notification Address (IP Address)
7.69.2 Register Notification Address (IPX Address)
7.69.3 Register Notification Address (E-mail Address)
7.70 Network Settings-Detail Settings-Total Counter Notification Settings
7.70.1 Notification Schedule Setting
7.70.2 Notification Address Setting
7.70.3 Model Name
7.70.4 Send Now
7.71 Network Settings-Detail Settings-PING Confirmation
7.71.1 Use
7.71.2 Procedure
7.72 Network Settings-Detail Settings-SLP Setting
7.72.1 Use
7.72.2 Default setting
7.72.3 Setting item
7.73 Network Settings-Detail Settings-LPD Setting
7.73.1 Use
7.73.2 Default setting
7.73.3 Setting item
7.74 Network Settings-Detail Settings-Prefix/Suffix Setting
7.74.1 ON/OFF Setting
7.74.2 Prefix/Suffix Setting
7.75 Network Settings-Detail Settings-Error Code Display Setting
7.75.1 Use
7.75.2 Default setting
7.75.3 Setting item
7.76 Network Settings-IEEE802.1X Authentication Settings
7.76.1 IEEE802.1X Authentication Settings
7.76.2 Auth. Status
7.76.3 Reset Job Settings
7.76.4 Certificate Verification Level Settings
7.77 Network Settings-Web Browser Setting
7.77.1 Use
7.77.2 Default setting
7.77.3 Setting item
7.78 Network Settings-Bluetooth Setting
7.78.1 Use
7.78.2 Default setting
7.78.3 Setting item
7.79 Network Settings-Single Sign-On Setting
Single Sign-On Setting
7.79.1 Domain Login Setting
7.79.2 Applications and Settings
7.79.3 Auto Log Out Time
7.80 Network Settings-Extended Network Settings
7.80.1 Extended Network Settings
7.80.2 Operating Mode
7.80.3 Awake from ErP
7.80.4 Wireless LAN Adapter
7.80.5 Device Setting
7.81 Network Settings-IWS Settings
7.81.1 IWS Settings
7.82 Network Settings-Remote Panel Settings
Remote Panel Settings
7.82.1 Server Settings
7.82.2 Client Settings
7.83 Network Settings-Machine Update Settings
7.83.1 Internet ISW Settings
7.83.2 Machine Auto Update setting
7.83.3 HTTP Proxy Settings
7.84 Network Settings-Tablet Settings
7.84.1 Use
7.84.2 Default setting
7.84.3 Setting item
7.85 Copier Settings
7.85.1 Auto Zoom (Platen)
7.85.2 Auto Zoom (ADF)
7.85.3 Specify Default Tray when APS Off
7.85.4 Print Jobs During Copy Operation
7.85.5 Tri-Fold Print Side
7.85.6 Automatic Image Rotation
7.86 Printer Settings
7.86.1 USB Timeout
7.86.2 Network Timeout
7.86.3 Print XPS/OOXML Errors
7.86.4 Assign Account to Acquire Device Info
7.87 Fax Settings
7.87.1 Header Information
7.87.2 Header/Footer Position
7.87.3 Line Parameter Setting
7.87.4 TX/RX Settings
7.87.5 Function Settings-Function ON/OFF Setting
7.87.6 Function Settings-Memory RX Setting
7.87.7 Function Settings-Closed Network RX
7.87.8 Function Settings-Forward TX Setting
7.87.9 Function Settings-Incomplete TX Hold
7.87.10 Function Settings-PC-Fax Permission Setting
7.87.11 Function Settings-PC-Fax RX Setting
7.87.12 Function Settings-TSI User Box Setting
7.87.13 Function Settings-TSI All File Type Settings
7.87.14 Function Settings-TX-Line Auto Switch Setting
7.87.15 PBX Connection Setting
7.87.16 Report Settings
7.87.17 Job Settings List
7.87.18 Multi Line Settings-PC-FAX TX Line Setting
7.87.19 Multi Line Settings-Fax Line 2 to 4-Line Parameter Setting
7.87.20 Multi Line Settings-Fax Line 2 to 4-Function Settings
7.87.21 Multi Line Settings-Fax Line 2 to 4-Multi Line Settings
7.87.22 Multi Line Settings-Fax Line 2 to 4-Sender Fax No
7.87.23 Network Fax Settings-Black Compression Level
7.87.24 Network Fax Settings-Color/Grayscale Multi-Value Compression Method
7.87.25 Network Fax Settings-Internet Fax Self Rx Ability
7.87.26 Network Fax Settings-Internet Fax Advanced Settings
7.87.27 Network Fax Settings-IP Address Fax Operation Settings
7.87.28 Fax Print Quality Settings
7.88 System Connection
7.88.1 OpenAPI Settings-Access Setting
7.88.2 OpenAPI Settings-SSL/Port Settings
7.88.3 OpenAPI Settings-Authentication
7.88.4 OpenAPI Settings-External Application Connection
7.88.5 OpenAPI Settings-Proxy Settings
7.88.6 OpenAPI Settings-Specified Application Start Setting
7.88.7 Call Remote Center
7.88.8 Prefix/Suffix Automatic Setting
7.88.9 Printer Information
7.88.10 Cellular Phone/PDA Setting
7.89 Security Settings-Administrator Password
7.89.1 Use
7.89.2 Procedure
7.90 Security Settings-User Box Administrator Setting
7.90.1 Use
7.90.2 Default setting
7.90.3 Setting item
7.91 Security Settings-Administrator Security Levels
7.91.1 Use
7.91.2 Default setting
7.91.3 Setting item
7.92 Security Settings-Security Details
7.92.1 Password Rules
7.92.2 Prohibited Functions When Authentication Error
7.92.3 Confidential Document Access Method
7.92.4 Manual Destination Input
7.92.5 Print Data Capture
7.92.6 Job Log Settings
7.92.7 Restrict Fax TX
7.92.8 Personal Data Security Settings
7.92.9 Hide Personal Information (MIB)
7.92.10 Display Activity Log
7.92.11 Initialize
7.92.12 Secure Print Only
7.92.13 Copy Guard
7.92.14 Password Copy
7.92.15 Web browser contents access
7.92.16 TX Operation Log
7.92.17 Hardware Encryption
7.92.18 Export Debug Log
7.92.19 Write the Configuration from USB
7.92.20 HDD backup data Settings
7.93 Security Settings-Enhanced Security Mode
7.93.1 Use
7.93.2 Default setting
7.93.3 Setting item
7.94 Security Settings-HDD Settings
7.94.1 Check HDD Capacity
7.94.2 Overwrite HDD Data
7.94.3 Overwrite All Data
7.94.4 HDD Lock Password
7.94.5 Format HDD
7.94.6 HDD Encryption Setting
7.94.7 Debug Log Encryption Settings
7.95 Security Settings-Function Management Settings
7.95.1 Usage Settings for Each Function
7.95.2 Maximum Job Allowance
7.95.3 Network Function Usage Settings
7.96 Security Settings-Stamp Settings
7.96.1 Apply Stamps
7.96.2 Delete Registered Stamp
7.97 Security Settings-Image Log Transfer Settings
7.97.1 Image Log Transfer Settings
7.97.2 Image Log Transfer Settings (Type1)
7.97.3 Image Log Transfer Settings (Type2)
7.98 Security Settings-Driver Password Encryption Setting
7.98.1 Use
7.98.2 Default setting
7.98.3 Setting item
7.99 Security Settings-FIPS Settings
7.99.1 FIPS Settings
7.100 License Settings
7.100.1 Get Request Code
7.100.2 Install License
7.100.3 List of Enabled Functions
7.101 Voice Guidance Settings-Voice Guidance
7.101.1 Use
7.101.2 Default setting
7.101.3 Setting item
7.102 OpenAPI Certification Management Setting
7.102.1 Restriction Code Settings
7.103 External Memory Backup
7.103.1 Import/Export
7.104 Remote Access Setting
7.104.1 Import/Export User Data
8. UTILITY (OTHER SETTINGS)
8.1 Banner Printing
8.1.1 Use
8.1.2 Procedure
8.2 My Panel Settings
8.2.1 Use
8.2.2 Procedure
8.3 Device Information
8.3.1 Use
8.3.2 Procedure
8.4 Remote Panel Operation
8.4.1 Use
9. ADJUSTMENT ITEM LIST
9.1 Replace feed roller, pick-up roller, separation roller (tray 1, tray 2)
9.2 Replace feed roller, separation roller assy (manual bypass tray)
9.3 Install LCT (Built-in)
9.4 Install LCT
9.5 Replace CCD unit
9.6 Replace developing unit
9.7 Replace drum unit
9.8 Replace transfer belt unit
9.9 Replace PH unit
9.10 Replace original size detection sensor
9.11 Replace scanner motor
9.12 Replace scanner home sensor
9.13 Replace printer control board
9.14 Replace MFP board
9.15 Replace SSD board
9.16 Replace original glass
9.17 Replace hard disk
9.18 Replace control panel unit
9.19 Replace DF control board
9.20 Add key counter
9.21 Execute initialize
9.22 Add an optional device
9.23 Execute F/W update
9.24 Add fax board
9.25 Replace DF-701
9.26 Replace CIS module
10. LIST OF SERVICE MODE
10.1 List of service mode (outline)
10.2 List of service mode (detail)
10.2.1 Machine
10.2.2 Imaging Process Adjustment
10.2.3 CS Remote Care
10.2.4 System 1
10.2.5 System 2
10.2.6 Counter
10.2.7 List Output
10.2.8 State Confirmation
10.2.9 Test Mode
10.2.10 ADF
10.2.11 FAX
10.2.12 Finisher
10.2.13 Network Settings
10.2.14 Machine Update Setting
11. SERVICE MODE
11.1 Starting/Setting/Exiting
11.1.1 Starting procedure
11.1.2 Setting procedure
11.1.3 Exiting procedure
11.2 Date/Time Input mode
11.2.1 Use
11.2.2 Procedure
11.3 Machine
11.3.1 Trail Edge Color Alignment Adj
11.3.2 Fusing Temperature
11.3.3 Fusing Transport Speed
11.3.4 Heater Control Level (bizhub 454e only)
11.3.5 Printer Area
11.3.6 Scan Area
11.3.7 Printer Reg. Loop Adj
11.3.8 Color Registration Adjustment
11.3.9 Print Head Skew Adj
11.3.10 LD adjustment
11.3.11 Manual Bypass Tray Width Adj
11.3.12 Lead Edge Erase Adjustment
11.3.13 Non-Image Area Erase Check
11.3.14 ADF Scan Glass Contamination
11.3.15 Exhaust Fan Stop Delay
11.3.16 PPM Control Choice
11.4 Firmware Version
11.4.1 Use
11.4.2 Procedure
11.5 Imaging Process Adjustment
11.5.1 Gradation Adjust
11.5.2 Max Image Density Adj
11.5.3 TCR Level Setting
11.5.4 Image Background Adj
11.5.5 Transfer Voltage Fine Adj
11.5.6 Stabilizer
11.5.7 Thick Paper Density Adjustment
11.5.8 Paper separation adjustment
11.5.9 Manual Toner Add
11.5.10 Monochrome Density Adjustment
11.5.11 Grad/Dev AC Bias V Selection
11.5.12 Removable Voltage Adjust
11.6 CS Remote Care (Outlines)
11.7 Setting up the CS Remote Care
11.7.1 Using the telephone line modem
11.7.2 Using the Fax line modem
11.7.3 Using E-mail
11.7.4 When using a WebDAV server in http communication
11.8 Software SW setting for CS Remote Care
11.8.1 Input procedure
11.8.2 List of software SW for CS Remote Care
11.8.3 SW No. 01
11.8.4 SW No. 02
11.8.5 SW No. 03
11.8.6 SW No. 04
11.8.7 SW No. 05
11.8.8 SW No. 06
11.8.9 SW No. 07
11.8.10 SW No. 08
11.8.11 SW No. 09
11.8.12 SW No. 10
11.8.13 SW No. 11
11.8.14 SW No. 12
11.8.15 SW No. 14
11.8.16 SW No. 15
11.8.17 SW No. 18
11.8.18 SW No. 21
11.8.19 SW No. 22
11.8.20 SW No. 23
11.9 Setup confirmation
11.10 Calling the maintenance
11.10.1 When starting the maintenance
11.10.2 When finishing the maintenance
11.11 Calling the center from the administrator
11.12 Checking the transmission log
11.13 Detail on settings for CS Remote Care
11.13.1 Maintenance/Default Settings – System Selection
11.13.2 Maintenance/Default Settings – ID Code
11.13.3 Maintenance/Default Settings – Detail Setting
11.13.4 Maintenance/Default Settings – Server Setting (E-Mail1 or E-mail2 is selected.)
11.13.5 Maintenance/Default Settings – Server Setting (http1 or http2 is selected)
11.13.6 Product Auth. Settings
11.13.7 Import/Export Settings
11.14 System 1
11.14.1 Marketing Area
11.14.2 Tel/Fax Number
11.14.3 Serial Number
11.14.4 Sleep ON/OFF Choice Setting
11.14.5 Foolscap Size Setting
11.14.6 Original Size Detection
11.14.7 Install Date
11.14.8 Initialization-Clear All Data
11.14.9 Initialization-Clear Individual Data
11.14.10 Initialization-System Error Clear
11.14.11 Problem Unit Isolation Set
11.14.12 Post card transfer table
11.14.13 Warmup
11.14.14 Machine State LED Setting
11.14.15 TP Level
11.15 System 2
11.15.1 HDD
11.15.2 Image Controller Setting
11.15.3 Option Board Status
11.15.4 Consumable Life Reminder
11.15.5 Unit Change
11.15.6 Software Switch Setting
11.15.7 CCD Calibration
11.15.8 LCT (Built-in) Size Settings
11.15.9 LCT Paper Size Setting
11.15.10 Paper Reuse Box Setting
11.15.11 Line Mag Setting
11.15.12 Data Capture
11.15.13 ADF Scan Glass Contamin. Set
11.15.14 Stamp
11.15.15 Network Fax Settings
11.15.16 RX File Change Page Name
11.15.17 ADF Settings
11.15.18 Image Stabilization Setting
11.15.19 User Paper Settings
11.15.20 Coverage Rate Screen
11.15.21 JAM Code Display Setting
11.15.22 BootUp Screen
11.15.23 Install Data
11.15.24 Bluetooth Settings
11.15.25 CIS Image Adjustment
11.15.26 Display Eco Index
11.15.27 Internal Error. Auto Cancel
11.15.28 Acquiring Settings
11.15.29 Driver Install
11.15.30 Application Change Setting
11.15.31 Custom Pattern
11.16 Counter
11.16.1 Common procedure
11.16.2 Life
11.16.3 Service Call
11.16.4 Section Service Call
11.16.5 Warning
11.16.6 Maintenance
11.16.7 Service Total
11.16.8 Counter of Each Mode
11.16.9 Service Call History (Data)
11.16.10 ADF Paper Pages
11.16.11 Paper Jam History
11.16.12 Fax Connection Error
11.16.13 ADF Scan Glass Contamin. Counter
11.16.14 Parts Counter (Fixed)
11.16.15 Jam
11.16.16 Section JAM
11.16.17 Instantaneous Power Failure
11.16.18 Detail code history
11.17 List Output
11.17.1 Batch list CSV output
11.17.2 Machine Management List
11.17.3 Adjustments List
11.17.4 Parameter List
11.17.5 Service Parameter
11.17.6 Protocol Trace
11.17.7 Fax Setting List
11.17.8 Fax Analysis List
11.18 State Confirmation
11.18.1 Sensor Check
11.18.2 Table Number
11.18.3 Level History 1
11.18.4 Level History 2
11.18.5 Temp. & Humidity
11.18.6 CCD Check
11.18.7 Memory/HDD Adj
11.18.8 Memory/HDD State
11.18.9 Color Regist
11.18.10 Load Check
11.18.11 Adjustment Data List
11.18.12 Self-diagnostic
11.19 Test Mode
11.19.1 Procedure for test pattern output
11.19.2 Gradation Pattern
11.19.3 Halftone Pattern
11.19.4 Lattice Pattern
11.19.5 Solid Pattern
11.19.6 Color Sample
11.19.7 8 Color Solid Pattern
11.19.8 CMM pattern
11.19.9 Isolated Dot Pattern
11.19.10 Paper Passage Test
11.19.11 Fax Test-Signal Send Test
11.19.12 Fax Test-Signal Receive Test
11.19.13 Fax Test-NCU TEST
11.20 ADF
11.20.1 Original Stop Position
11.20.2 Registration Loop Adj
11.20.3 Auto Stop Position Adjustment
11.20.4 Paper Passage
11.20.5 Sensor Check
11.20.6 Original Tray Width
11.20.7 Read Pos Adj
11.20.8 Feed Zoom
11.20.9 Scanning Light Adjustment
11.20.10 Mixed original size adjustment
11.20.11 Home Read Position Adjust
11.20.12 FD-Mag. Adj. (B)
11.20.13 Main Scanning Direction Zoom
11.21 FAX setting (Line1)
11.21.1 Modem/NCU
11.21.2 Network
11.21.3 System
11.21.4 Fax File Format
11.21.5 Communication
11.21.6 List Output
11.21.7 Function Parameter
11.21.8 Initialization
11.22 FAX setting (Line2, Line 3, Line 4)
11.22.1 Modem/NCU
11.22.2 Network
11.22.3 Communication
11.22.4 Initialization
11.23 FAX setting (Address parameter list: for line 1, line 2, line 3 and line 4)
11.23.1 0b000#
11.23.2 0b001#
11.23.3 0b002#
11.23.4 0b003#
11.23.5 0b004#, 0b005#
11.23.6 0b006#
11.23.7 0e000#
11.23.8 0e001#
11.23.9 0e002#
11.23.10 0e003#
11.23.11 0e004#
11.23.12 0e005#
11.23.13 12000#
11.23.14 13000#
11.23.15 13003#
11.23.16 13004#
11.23.17 13005#
11.23.18 13006#
11.23.19 13007#
11.23.20 13008#
11.24 FAX setting (Address parameter list: for line 1)
11.24.1 0e009#
11.24.2 0e00a#
11.24.3 0e00b#
11.24.4 0e00c#
11.24.5 0e00d#
11.24.6 0e00e#
11.24.7 0e00f#
11.24.8 0e010#
11.24.9 0e011#
11.24.10 0f000#
11.24.11 0f001#
11.24.12 10000#
11.24.13 10001#
11.25 FAX setting (Address parameter list: for line 2)
11.25.1 0e01a#
11.25.2 0e01b#
11.25.3 0e01c#
11.25.4 0e01d#
11.25.5 0e01e#
11.25.6 0e01f#
11.25.7 0e020#
11.25.8 0e021#
11.25.9 0e022#
11.25.10 0f002#
11.25.11 0f003#
11.25.12 10002#
11.25.13 10003#
11.26 FAX setting (Address parameter list: for line 3)
11.26.1 0e02b#
11.26.2 0e02c#
11.26.3 0e02d#
11.26.4 0e02e#
11.26.5 0e02f#
11.26.6 0e030#
11.26.7 0e031#
11.26.8 0e032#
11.26.9 0e033#
11.26.10 0f004#
11.26.11 0f005#
11.26.12 10004#
11.26.13 10005#
11.27 FAX setting (Address parameter list: for line 4)
11.27.1 0e03c#
11.27.2 0e03d#
11.27.3 0e03e#
11.27.4 0e03f#
11.27.5 0e040#
11.27.6 0e041#
11.27.7 0e042#
11.27.8 0e043#
11.27.9 0e044#
11.27.10 0f006#
11.27.11 0f007#
11.27.12 10006#
11.27.13 10007#
11.28 Finisher
11.28.1 FS-FN adjustment – Center Staple Position (SD-511/SD-512)
11.28.2 FS-FN adjustment – Half-Fold Position (SD-511/SD-512)
11.28.3 FS-FN adjustment – Punch Centering Fine Adj (PK-521)
11.28.4 FS-FN adjustment – Punch Edge Adj (PK-520/PK-521)
11.28.5 FS-FN adjustment – Punch F. Sensor Intensity Adj. (PK-521)
11.28.6 FS-FN adjustment – Punch vertical position (Z-fold) (ZU-606)
11.28.7 FS-FN adjustment – Punch horizontal position (Z-fold) (ZU-606)
11.28.8 FS-FN adjustment – Punch regist adj. (Z-fold) (ZU-606)
11.28.9 FS-FN adjustment – Punch Registration Loop Adj (PK-521)
11.28.10 FS-FN adjustment – Punch Resist Loop Size (PI) (PI-505)
11.28.11 FS-FN adjustment – 1st Z-Fold Position/2nd Z-Fold Position (ZU-606)
11.28.12 FS-FN adjustment – 1st Tri-Fold Adjustment/2nd Tri-Fold Adjustment (SD-511/SD-512)
11.28.13 FS-FN adjustment – Punch Regist Loop Size (PK-520)
11.28.14 FS-FN adjustment – PI Size Detection (PI-505)
11.28.15 FS-FN adjustment – Post Inserter Adjustment (PI-505)
11.28.16 FS-FN adjustment – Finisher Components Test Mode
11.28.17 FS-FN adjustment – Alignment plate Position (FS-533)
11.28.18 FS-FN adjustment – Paper Alignment Guides W. Adj. (FS-534/FS-535)
11.28.19 FS-FN adjustment – Punch unit edge detection (ZU-606)
11.28.20 Max Staple Limit Setting (FS-535)
11.28.21 Punch Option Setting
11.28.22 Max. # of Folded Sheets Setting (SD-511/SD-512, ZU-606)
11.28.23 Tri-Fold Output Setting (SD-512)
11.28.24 Job Separator (JS-506)
11.29 Network Settings
11.29.1 2nd Network Setting – 2nd network card settings
11.29.2 2nd Network Setting – Operating Mode
11.29.3 2nd Network Setting – SSID
11.29.4 2nd Network Setting – Authentication/Encryption Algorithm
11.29.5 2nd Network Setting – WEP Key
11.29.6 2nd Network Setting – Passphrase
11.29.7 2nd Network Setting – Wireless Channel
11.29.8 2nd Network Setting – ANY Connection
11.29.9 2nd Network Setting – Connect permission extension address list
11.29.10 2nd Network Setting – DHCP Server Setting
11.29.11 2nd Network Setting – TCP/IP Settings
11.30 Machine Update Setting
Internet ISW
11.30.1 Internet ISW – Internet ISW Set
11.30.2 Internet ISW – HTTP Setting
11.30.3 Internet ISW – FTP Setting
11.30.4 Internet ISW – Forwarding Access Setting
11.30.5 Internet ISW – Download
11.30.6 Internet ISW – Update Start Time Settings
11.30.7 Machine Auto Update setting – Auto Update setting
11.30.8 Machine Auto Update setting – Relay server setting
11.30.9 Machine Auto Update setting – Transmission log Update
11.30.10 Machine Auto Update setting – Transmission Server Log
11.30.11 Machine Auto Update setting – Update Log Display
11.30.12 Machine Auto Update setting – Relay Server Log Confirmation
11.30.13 Machine Auto Update setting – Manual Update
11.30.14 Machine Auto Update setting – Machine Export setting
11.30.15 Machine Auto Update setting – Machine Update Password
12. ENHANCED SECURITY
12.1 List of Enhanced Security
12.2 Starting/Exiting
12.2.1 Starting procedure
12.2.2 Exiting procedure
12.3 Enhanced Security
12.3.1 CE Password
12.3.2 Administrator Password
12.3.3 Administrator Feature Level
12.3.4 CE Authentication
12.3.5 Life Stop Setting
12.3.6 Memory Data Backup
12.3.7 operation Ban release time
12.3.8 Administrator unlocking
12.3.9 Engine FW DipSW
12.3.10 Engine Data Backup
12.3.11 HDD Data Backup
13. BILLING SETTING
Billing Setting
13.1 List of billing setting
13.2 Starting/Exiting
13.2.1 Starting procedure
13.2.2 Exiting procedure
13.3 Billing Setting
13.3.1 Counter Setting
13.3.2 Management Function Choice
13.3.3 Management Function Choice – Key Counter IF Vendor
13.3.4 Management Function Choice – Authentication Device 2
13.3.5 Management Function Choice – Key Counter Only
13.3.6 Management Function Choice – Management Device
13.3.7 Management Function Choice – Vendor 2
13.3.8 Setting items that automatically change the setting values
13.3.9 Coverage Rate Clear
13.3.10 License management – Activation
13.3.11 License management – Deactivation
13.3.12 License management – Repair
13.3.13 License management – Initialize
13.3.14 License management – Request Code
13.3.15 License management – List
13.3.16 License management – Function List
13.3.17 Manage OpenAPI Authentication
13.3.18 WebDAV Server Setting
14. DEBUG SETTINGS
Debug Settings
14.1 List of debug settings
14.2 Starting/Exiting
14.2.1 Starting procedure
14.2.2 Exiting procedure
14.3 Debug Settings
14.3.1 Debug Log Output
14.3.2 Acquiring Mode
14.3.3 TX Debug Log Settings
14.3.4 USB Password
14.4 Operation of the debug log function
14.4.1 Basic mode
14.4.2 Enhance mode
15. CONTENTS TO BE CLEARED BY RESET FUNCTION
16. MECHANICAL ADJUSTMENT bizhub 554e/454e
16.1 Scanner section
16.1.1 Adjustment of the scanner motor belt
16.2 Paper feed section
16.2.1 Centering adjustment of the tray 1/2
16.2.2 Pick-up pressure adjustment of the tray 1/2
16.2.3 Separator roller pressure adjustment of the bypass tray
16.2.4 Adjustment of the bypass CD paper size VR
16.3 Fusing section
16.3.1 Adjusting the parallelism of the fusing unit path
17. MECHANICAL ADJUSTMENT DF-701
17.1 Original document feed section
17.1.1 Adjusting the height
17.1.2 Adjusting front side skew feed on ADF
17.1.3 Adjusting back side skew feed on ADF
17.1.4 Adjusting the pressure of the separation roller
18. MECHANICAL ADJUSTMENT PC-210/PC-110
18.1 Paper reference position
18.1.1 Purpose
18.1.2 Procedure
19. MECHANICAL ADJUSTMENT PC-410
19.1 Paper reference position
19.1.1 Purpose
19.1.2 Procedure
19.2 Shifter movement timing belt adjustment
19.2.1 Procedure
20. MECHANICAL ADJUSTMENT LU-204
20.1 Paper feed section
20.1.1 Centering adjustment of the LCT
20.1.2 Pick-up roller load adjustment of the LCT
21. MECHANICAL ADJUSTMENT LU-301
21.1 Paper feed section
21.1.1 Centering adjustment of the LCT
21.1.2 Pick-up roller load adjustment of the LCT
22. MECHANICAL ADJUSTMENT PK-519
22.1 Punch section
22.1.1 Punch hole deviation correction
23. MECHANICAL ADJUSTMENT PK-520
23.1 Punch section
23.1.1 Punch hole deviation correction
24. MECHANICAL ADJUSTMENT SD-511
24.1 Paper exit section
24.1.1 Half-fold skew adjustment
25. MECHANICAL ADJUSTMENT PK-521
25.1 Punch section
25.1.1 Punch hole deviation correction
25.1.2 Centering adjustment of the punch kit
26. MECHANICAL ADJUSTMENT SD-512
26.1 Paper exit section
26.1.1 Half-fold skew adjustment
27. MECHANICAL ADJUSTMENT PI-505
27.1 PI displacement adjustment (with PK-521 installed)
27.1.1 Purpose
27.1.2 Procedure
28. MECHANICAL ADJUSTMENT ZU-606
28.1 Gate solenoid/Lw adjustment
28.1.1 Purpose
28.1.2 Procedure
28.2 1st folding skew adjustment
28.2.1 Purpose
28.2.2 Procedure
28.3 2nd folding skew adjustment
28.3.1 Purpose
28.3.2 Procedure
28.4 2nd stopper position adjustment
28.4.1 Purpose
28.4.2 Procedure

J) REWRITING OF FIRMWARE
1. Confirming the firmware version
1.1 Procedure
2. USB memory
2.1 Preparation
2.2 Procedure
2.3 Action when data transfer fails
2.4 Entering the machine type information
3. Internet ISW
3.1 Preparations for firmware rewriting
3.1.1 Outline
3.1.2 Service environment
3.1.3 Preparations for firmware rewriting
3.2 Making the firmware data
3.2.1 Outline
3.2.2 Procedure
3.3 Firmware rewriting from the control panel
3.3.1 Firmware rewriting from the control panel
4. Procedures for rewriting the firmware by using the Auto Update function
4.1 Outline
4.2 Service environment
4.3 Procedures for rewriting the firmware by using the Auto Update function
4.3.1 Preparations
4.3.2 Download the firmware data automatically from the program server
5. Firmware Distribute Server function (Relay server)
5.1 Outline
5.2 Service environment
5.3 Firmware relay procedures by using “relay server function”
5.3.1 Preparations
5.3.2 Download and open the relay data automatically from the program server
5.3.3 Download the firmware opened from the relay server by using the Auto Update function on the other MFP
6. CS Remote Care
6.1 Firmware rewriting from the CS Remote Care
7. How to install the i-Option data
7.1 Available function for i-Option
7.2 LK-107/LK-108 font data installation procedure
7.2.1 When the font data is ***.pdf format file

K) TROUBLESHOOTING
1. JAM CODE
(1) JAM DISPLAY
(2) Misfeed display resetting procedure
1.1 List of the JAM code
1.2 JAM that do not display the JAM code
1.3 Sensor layout
1.3.1 bizhub 554e/454e
1.3.2 DF
1.3.3 PC-110/PC-210
1.3.4 PC-410
1.3.5 LU-204/LU-301
1.3.6 FS-533/PK-519
1.3.7 FS-534/PK-520/SD-511
1.3.8 FS-535/PK-521/SD-512
1.3.9 ZU-606
1.3.10 JS-602
1.3.11 PI-505
1.4 Initial check items
1.5 Jam when thin or thick paper is fed
1.5.1 Paper jam for thin paper
1.5.2 Paper jam for thick paper
1.6 1#-##
1.6.1 10-01, 10-02, 10-40
1.6.2 11-01, 11-02, 11-40
1.6.3 12-01, 12-40
1.6.4 13-01, 13-40
1.6.5 14-01, 14-40
1.6.6 15-01, 15-40
1.6.7 16-01, 16-40
1.7 2#-##
1.7.1 20-01, 20-02
1.7.2 20-21
1.7.3 20-22
1.8 3#-##
1.8.1 30-03
1.8.2 32-01, 32-05
1.9 6#-##
1.9.1 66-02, 66-12
1.9.2 66-03, 66-13, 66-23, 66-33
1.9.3 66-04, 66-14
1.9.4 66-05, 66-06
1.9.5 66-07
1.10 7#-##
1.10.1 71-01
1.10.2 72-11
1.10.3 72-13
1.10.4 72-14
1.10.5 72-15
1.10.6 72-16
1.10.7 72-17
1.10.8 72-18
1.10.9 72-19
1.10.10 72-21
1.10.11 72-22
1.10.12 72-23
1.10.13 72-25
1.10.14 72-26
1.10.15 72-31, 72-34
1.10.16 72-35
1.10.17 72-38
1.10.18 72-39
1.10.19 72-40
1.10.20 72-41, 72-42
1.10.21 72-43
1.10.22 72-44
1.10.23 72-45
1.10.24 72-46
1.10.25 72-47
1.10.26 72-49
1.10.27 72-50
1.10.28 72-51
1.10.29 72-60
1.10.30 72-61
1.10.31 72-62
1.10.32 72-64
1.10.33 72-70
1.10.34 72-81
1.10.35 72-84
1.10.36 72-85
1.10.37 72-86
1.10.38 72-87
1.10.39 72-90
1.10.40 73-16
1.10.41 75-42
1.10.42 75-43
1.11 9#-##
1.11.1 92-01, 92-02, 92-40
1.11.2 93-10
1.11.3 99-01
1.11.4 99-02
1.11.5 99-03
1.11.6 99-04
1.11.7 99-05
1.11.8 99-06
1.11.9 99-07
1.11.10 99-08
1.11.11 99-09
2. MALFUNCTION CODE
2.1 Display procedure
2.2 List of the malfunction code
2.3 S-1
2.3.1 Contents
2.3.2 Procedure
2.4 S-2
2.4.1 Contents
2.4.2 Procedure
2.5 D-1
2.5.1 Contents
2.5.2 Procedure
2.6 D-3
2.6.1 Contents
2.6.2 Procedure
2.7 P-5
2.7.1 Contents
2.7.2 Procedure
2.8 P-9
2.8.1 Contents
2.8.2 Procedure
2.9 P-27
2.9.1 Contents
2.9.2 Procedure
2.10 P-32
2.10.1 Contents
2.10.2 Procedure
2.11 P-33
2.11.1 Contents
2.11.2 Procedure
3. TROUBLE CODE
3.1 Display procedure
3.2 Trouble resetting procedure
3.2.1 Trouble resetting procedure by Trouble Reset key
3.2.2 Trouble resetting procedure by the auto cancel function
3.2.3 Trouble resetting procedure by remote operation
3.3 Trouble isolation function
3.4 List of the trouble code
3.5 C0###
3.5.1 C0002
3.5.2 C0106
3.5.3 C0107
3.5.4 C0108
3.5.5 C0109
3.5.6 C0202
3.5.7 C0204
3.5.8 C0206
3.5.9 C0208
3.5.10 C0210
3.5.11 C0211
3.5.12 C0214
3.5.13 C0216
3.6 C1###
3.6.1 C1003
3.6.2 C1004
3.6.3 C1005
3.6.4 C1080
3.6.5 C1081
3.6.6 C1102
3.6.7 C1103
3.6.8 C1104
3.6.9 C1105
3.6.10 C1106
3.6.11 C1109
3.6.12 C1112
3.6.13 C1113
3.6.14 C1114
3.6.15 C1115
3.6.16 C1124
3.6.17 C1125
3.6.18 C1127
3.6.19 C1130
3.6.20 C1131
3.6.21 C1132
3.6.22 C1133
3.6.23 C1134
3.6.24 C1135
3.6.25 C1136
3.6.26 C1140
3.6.27 C1141
3.6.28 C1142
3.6.29 C1143
3.6.30 C1144
3.6.31 C1145
3.6.32 C1152
3.6.33 C1156
3.6.34 C1182
3.6.35 C1184
3.6.36 C1195
3.6.37 C1196
3.6.38 C1197
3.6.39 C11A1
3.6.40 C11A2
3.6.41 C11C5
3.6.42 C11E1
3.6.43 C1402
3.7 C2###
3.7.1 C2350
3.7.2 C2355
3.7.3 C2414
3.7.4 C2557
3.7.5 C2558
3.7.6 C255C
3.7.7 C2564
3.7.8 C2650
3.7.9 C2A14
3.7.10 C2A24
3.8 C3###
3.8.1 C3101
3.8.2 C3102
3.8.3 C3201, C3202
3.8.4 C3302
3.8.5 C3425
3.8.6 C3722, C3725, C3726
3.8.7 C3822
3.8.8 C3825, C3826
3.8.9 C3922, C3925, C3926
3.8.10 C392A
3.8.11 C3B02, C3B03
3.8.12 C3B07, C3B08
3.9 C4###
3.9.1 C4091
3.9.2 C4101
3.9.3 C4501
3.9.4 C4801
3.9.5 C4802
3.10 C5###
3.10.1 C5102, C5103
3.10.2 C5304
3.10.3 C5306
3.10.4 C5351
3.10.5 C5354
3.10.6 C5355
3.10.7 C5358
3.10.8 C5370
3.10.9 C5372
3.10.10 C5501
3.10.11 C5601
3.10.12 C5603
3.11 C6###
3.11.1 C6001
3.11.2 C6002
3.11.3 C6102, C6103
3.11.4 C6104, C6105
3.11.5 C6704
3.11.6 C6751
3.11.7 C6752
3.11.8 C6753
3.11.9 C6754, C6755
3.11.10 C6756
3.11.11 C6901, C6902, C6903
3.11.12 C6911, C6912, C6913
3.11.13 C6F01
3.12 C8###
3.12.1 C8101
3.12.2 C8107
3.12.3 C8302
3.12.4 C8401
3.13 C9###
3.13.1 C9401, C9402
3.13.2 C9403, C9404
3.14 CA###
3.14.1 CA051, CA052, CA053
3.15 CC###
3.15.1 CC001
3.15.2 CC140
3.15.3 CC151, CC152
3.15.4 CC155
3.15.5 CC156
3.15.6 CC157
3.15.7 CC158
3.15.8 CC159, CC15A
3.15.9 CC15B
3.15.10 CC15C
3.15.11 CC163
3.15.12 CC164
3.15.13 CC165
3.15.14 CC170, CC171, CC172, CC173, CC174, CC180, CC181, CC182, CC183, CC184, CC185, CC186
3.15.15 CC190
3.15.16 CC191
3.15.17 CC211
3.15.18 CC212
3.15.19 CC213
3.15.20 CC214
3.15.21 CC216
3.16 CD###
3.16.1 CD002
3.16.2 CD004, CD00F, CD020
3.16.3 CD010
3.16.4 CD011
3.16.5 CD012
3.16.6 CD030
3.16.7 CD041, CD042, CD043, CD044, CD045, CD046
3.16.8 CD047, CD048, CD049, CD04A, CD04B
3.16.9 CD110
3.16.10 CD201, CD202, CD203
3.16.11 CD211, CD212
3.16.12 CD241, CD242
3.16.13 CD261
3.16.14 CD262
3.16.15 CD271
3.16.16 CD272
3.16.17 CD3##
3.16.18 CD370
3.16.19 CD390
3.16.20 CD3A0
3.16.21 CD401, CD402, CD403, CD404, CD405, CD406, CD407, CD411, CD412, CD413
3.16.22 CDC##
3.16.23 CDF50, CDF70, CDFA0
3.16.24 CDF51, CDF71, CDFA1
3.17 CE###
3.17.1 CE001, CE003, CE004, CE005, CE006, CE007
3.17.2 CE002
3.17.3 CE101
3.17.4 CE201
3.17.5 CE301, CE302, CE303, CE304, CE305
3.17.6 CED01
3.17.7 CEEE1
3.17.8 CEEE2
3.17.9 CEEE3
4. ABORT CODE
4.1 Troubleshooting of the abort code
4.1.1 Contents
4.1.2 Procedure
4.2 CF0##
4.3 CF1##
4.4 CF2##
4.5 CF3##
4.6 CF4##
4.7 CF5##
4.8 CF6##
4.9 CF7##
4.10 CF8##
4.11 CF9##
4.12 CFA##
4.13 CFB##
4.13.1 CFB0#
4.13.2 CFB1#
4.13.3 CFB2#
4.13.4 CFB3#
4.13.5 CFB4#
4.13.6 CFB5#
4.13.7 CFB6#
4.13.8 CFB7#
4.13.9 CFB8#
4.13.10 CFB9#
4.13.11 CFBA#
4.13.12 CFBB#
4.13.13 CFBC#
4.14 CFC##
4.14.1 CFC0#
4.14.2 CFC1#
4.14.3 CFC2#
4.14.4 CFC3#
4.14.5 CFC4#
4.14.6 CFC5#
4.14.7 CFC6#
4.14.8 CFC7#
4.14.9 CFC8#
4.14.10 CFC9#
4.14.11 CFCA#
4.14.12 CFCB#
4.14.13 CFCC#
4.14.14 CFCD#
4.14.15 CFCE#
4.14.16 CFCF#
4.15 CFD##
4.15.1 CFD0#
4.15.2 CFD1#
4.15.3 CFD2#
4.15.4 CFD3#
4.15.5 CFD4#
4.15.6 CFD5#
4.15.7 CFD6#
4.15.8 CFD7#
4.15.9 CFD8#
4.15.10 CFDA#
4.16 CFE##
4.16.1 CFE0#
4.16.2 CFE1#
4.16.3 CFE2#
4.16.4 CFE3#
4.16.5 CFE4#
4.16.6 CFE5#
4.16.7 CFE6#
4.16.8 CFE7#
4.16.9 CFE8#
4.16.10 CFEA#
4.17 CFF##
4.17.1 CFF0#
4.17.2 CFF1#
4.17.3 CFF2#
4.17.4 CFF3#
4.17.5 CFF4#
4.17.6 CFF5#
4.17.7 CFF6#
4.17.8 CFF7#
4.17.9 CFF8#
4.17.10 CFFA#
4.17.11 CFFC#
4.17.12 CFFD#
4.17.13 CFFE#
5. ERROR CODE FOR THE INTERNET ISW
5.1 Error code list for the Internet ISW
5.2 0x0#
5.3 0x1#
5.4 0x2#
6. CS Remote Care ERROR CODE
6.1 Troubleshooting for CS Remote Care
6.2 CS Remote Care Operation under Enhanced Security Mode
6.3 List of the CS Remote Care error code
6.3.1 When connecting by modem
6.3.2 When connecting by e-mails
6.3.3 When connecting by http
6.3.4 When connecting by Fax modem
7. NETWORK ERROR CODE
7.1 Display procedure
7.2 IEEE802.1X
7.3 LDAP
7.4 E-Mail/Internet Fax
7.5 FTP transmission
7.6 SMB transmission
7.7 SMTP transmission
7.8 WebDAV transmission
7.9 SMB browsing
7.10 User authentication
7.11 WebDAV client (Response reception)
7.12 WebDAV client (Request sending)
7.13 WSD scan
7.14 Bluetooth
7.15 GSS-API
7.16 Scan server transmission
7.17 Packet capture
8. FAX TROUBLE CODE
The error in the transmission/reception system
8.1 B0##
8.2 B11#
8.3 B12#
8.4 B13#
8.5 B14#
8.6 B15#
8.7 B16#
8.8 B17#
8.9 B18#
8.10 B19#
8.11 T0#
8.12 T1#
8.13 T2#
8.14 T3#
8.15 T4#
8.16 T5#
8.17 T6#
8.18 T7#
8.19 T8#
8.20 T9#
8.21 R0#
8.22 R1#
8.23 R2#
8.24 R3#
8.25 R4#
8.26 R5#
8.27 R6#
8.28 R7#
8.29 R8#
8.30 R9#
8.31 Others
9. DIAGNOSTIC CODES
9.1 Outline
9.2 Explanation
9.2.1 The diagnostic code
9.2.2 Information of communication results and conditions
10. NETWORK FAX ERROR CODE
10.1 Error code list of the transmission system
10.2 Error code list of the reception system
11. Open API RELATED TROUBLE
11.1 Outline
11.2 Types of Trouble
11.3 Solution
11.3.1 When using an application
11.3.2 After rewriting the firmware of the machine
12. TROUBLES THAT DO NOT DISPLAY THE TROUBLE CODE
12.1 Machine is not energized at all (DCPU operation check)
12.1.1 Contents
12.1.2 Procedure
12.2 Fusing heaters do not operate
12.2.1 Contents
12.2.2 Procedure
12.3 Power is not supplied to DF
12.3.1 Procedure
12.4 Power is not supplied to option
12.4.1 PC-110/PC-210/PC-410
12.4.2 LU-204/301
12.4.3 FS-533/FS-534/FS-535
13. OTHER TROUBLE
13.1 Firmware error warning
13.1.1 Action
13.2 HDD lock password error warning
13.2.1 Detection timing
13.2.2 Action
14. TROUBLESHOOTING OF i-Option
14.1 Structure of license management
14.2 License management information
14.3 Error message
14.3.1 License management error
15. IMAGE QUALITY PROBLEM
15.1 How to read element data
15.1.1 Table number
15.1.2 Level history 1
15.1.3 Level history 2
15.2 Troubleshooting procedure overview
15.2.1 Test pattern printing
15.2.2 Self-diagnostic function
15.3 Corrective action procedure
15.3.1 Image trouble sample illustrations
15.3.2 White line 1, White band 1, Black line 1, Black band 1
15.3.3 White line 2, White band 2, Black line 2, Black band 2
15.3.4 Uneven density 1
15.3.5 Uneven density 2
15.3.6 Faint image, low image density (ID lowering)
15.3.7 Gradation reproduction failure
15.3.8 Foggy background
15.3.9 Void areas, White spots
15.3.10 Black spots
15.3.11 Blurred image
15.3.12 Back marking
15.3.13 Blank copy, Black copy
15.3.14 Uneven pitch
15.3.15 Uneven gloss, rough gloss
15.3.16 Poor fusing performance, Offset
15.3.17 Brush effect, Image bleeding
15.3.18 Blurred fine lines
15.3.19 Moire
15.3.20 Skewed image
15.3.21 Distorted image
15.3.22 ACS malfunction
15.3.23 Abnormal image
16. IC PROTECTOR
16.1 Outline
16.2 IC protector list
16.2.1 bizhub 554e/454e
16.2.2 DF-701
16.2.3 PC-410
16.2.4 LU-204/LU-301
16.2.5 JS-506
16.2.6 FS-533
16.2.7 PK-519
16.2.8 FS-534
16.2.9 SD-511
16.2.10 FS-535
16.2.11 PK-521
16.2.12 ZU-606
16.2.13 PI-505

L) PARTS/CONNECTOR LAYOUT DRAWING
1. PARTS LAYOUT DRAWING
1.1 bizhub 554e/454e
1.1.1 Scanner section
1.1.2 Front side
1.1.3 Back side
1.1.4 Left side
1.1.5 Right side
1.1.6 Manual bypass tray
1.1.7 Tray 1
1.1.8 Tray 2
1.1.9 Fusing/paper exit section
1.1.10 Duplex section
1.2 DF-701/SP-501
1.3 PC-210/PC-110 (Option)
1.3.1 Board/switch/sensor/others
1.3.2 Load
1.4 PC-410 (Option)
1.4.1 Board/switch/sensor/others
1.4.2 Load
1.5 LU-204 (Option)
1.6 LU-301 (Option)
1.7 JS-506 (Option)
1.8 FS-533 (Option)
1.9 PK-519 (Option)
1.10 FS-534 (Option)
1.11 PK-520 (Option)
1.12 SD-511 (Option)
1.13 FS-535 (Option)
1.14 PK-521 (Option)
1.15 SD-512 (Option)
1.16 JS-602 (Option)
1.17 PI-505 (Option)
1.18 ZU-606 (Option)
2. CONNECTOR LAYOUT DRAWING
2.1 BOARD CONNECTOR LAYOUT DRAWING
2.1.1 bizhub 554e/454e
2.1.2 DF control board (DFCB)
2.1.3 PC control board (PCCB)
2.1.4 LU drive board (LUDB)
2.1.5 JS control board (JSCB)
2.1.6 FS control board (FSCB)
2.1.7 RU control board (RUCB)
2.1.8 SD drive board (SDDB)
2.1.9 Stapler relay board (STREYB)
2.1.10 PK control board (PKCB)
2.1.11 PI drive board (PIDB)
2.1.12 ZU control board (ZUCB)
2.2 RELAY CONNECTOR LAYOUT DRAWING
2.2.1 bizhub 554e
2.2.2 bizhub 454e

M) TIMING CHART
1. bizhub 554e/454e
1.1 Timing chart when the main power switch is turned ON
2. LU-204
2.1 Operating conditions
2.2 Timing chart
3. FS-534/SD-511
3.1 Shift mode
3.1.1 Operating conditions
3.1.2 Timing chart
3.2 Center staples mode
3.2.1 Operating conditions
3.2.2 Timing chart
4. FS-535/SD-512
4.1 2 flat stitching staples mode
4.1.1 Operating conditions
4.1.2 Timing chart
4.2 Saddle stitching mode
4.2.1 Operating conditions
4.2.2 Timing chart
5. ZU-606
5.1 Z-folding+Punch mode
5.1.1 Operating conditions
5.1.2 Timing chart

N) WIRING DIAGRAM
1. bizhub 554e/454e
1.1 Main body
2. DF-701
2.1 DF-701
3. Option
3.1 PC-110
3.1.1 PC-110
3.2 PC-210
3.2.1 PC-210
3.3 PC-410
3.3.1 PC-410
3.4 LU-204
3.5 LU-301
3.6 JS-506
3.6.1 JS-506
3.7 FS-533
3.7.1 FS-533
3.8 FS-534
3.9 SD-511
3.10 FS-535
3.11 PK-521
3.12 SD-512
3.13 PI-505
3.14 ZU-606

O) THEORY OF OPERATION bizhub 554e/454e
1. INTERFACE SECTION
1.1 Configuration
1.1.1 Front side
1.1.2 Right side
1.1.3 Rear side
2. SCANNER SECTION
2.1 Configuration
2.2 Drive
2.3 Operation
2.3.1 LED exposure unit
2.3.2 When the power is ON
2.3.3 Control when the Start key is pressed
2.3.4 Original scanning area
2.3.5 Original size detection control
2.3.6 Image processing
3. WRITE SECTION (PH SECTION)
3.1 Configuration
3.2 Operation
3.2.1 Outline
3.2.2 Laser exposure process
3.2.3 Laser emission timing
3.2.4 Laser emission stop
3.2.5 Laser emission area
3.2.6 PH unit temperature detection control (bizhub 454e only)
3.2.7 PH window cleaning
3.2.8 Image processing
4. PHOTO CONDUCTOR SECTION
4.1 Configuration
4.2 Drive
4.3 Operation
4.3.1 Photo conductor drive mechanism
4.3.2 Photo conductor small amount rotation control
4.3.3 Erase LED control
4.3.4 Photo conductor cleaning
4.3.5 Charge corona control
4.3.6 Charge corona cleaning
4.3.7 Ozone filter
4.3.8 Drum unit detection
4.3.9 Drum unit life detection
4.3.10 Ozone filter new article detection
4.3.11 Ozone filter life detection
4.3.12 Number of field standard printed pages
5. DEVELOPING SECTION
5.1 Configuration
5.2 Drive
5.2.1 Developing section drive mechanism
5.3 Operation
5.3.1 Developing unit pressure/releases mechanism
5.3.2 Developer flow
5.3.3 Auto refining developing system
5.3.4 Developing bias
5.3.5 Toner scattering prevention
5.3.6 Developing cooling
5.3.7 Toner density control
5.3.8 Developing unit detection
5.3.9 Developing unit life detection
5.3.10 Toner filter life detection
5.3.11 Number of field standard printed pages
6. TONER SUPPLY SECTION
6.1 Configuration
6.2 Drive
6.2.1 Toner bottle drive
6.2.2 Toner hopper drive
6.3 Operation
6.3.1 Toner replenishing overview
6.3.2 Toner replenishing from toner bottle to toner hopper
6.3.3 Toner replenishing from toner hopper to developing unit
6.3.4 Auxiliary toner replenishing control for toner hopper
6.3.5 Auxiliary toner replenishing control for developing unit
6.3.6 Toner spillage prevention shutter
6.3.7 Front door mechanism
6.3.8 Life control
7. 1ST TRANSFER SECTION
7.1 Configuration
7.2 Drive
7.3 Operation
7.3.1 Transfer belt drive
7.3.2 1st transfer roller control
7.3.3 1st transfer control
7.3.4 Transfer belt cleaning
7.3.5 Waste toner spillage prevention shutter
7.3.6 Transfer belt cooling
7.3.7 Cleaning blade foreign matter removal control
7.3.8 Transfer belt new article detection
7.3.9 Transfer belt life detection
8. 2ND TRANSFER SECTION
8.1 Configuration
8.2 Drive
8.3 Operation
8.3.1 2nd transfer control
8.3.2 Control of toner application to 2nd transfer roller
8.3.3 2nd transfer roller cleaning
8.3.4 Charge neutralization and separation of paper
8.3.5 Paper winding prevention guide
8.3.6 IDC sensor protection
8.3.7 2nd transfer roller new article detection
8.3.8 2nd transfer roller life detection
9. TONER COLLECTING SECTION
9.1 Configuration
9.2 Drive
9.3 Operation
9.3.1 Waste toner box drive mechanism
9.3.2 Control of waste toner conveyance through waste toner box
9.3.3 Waste toner box-in-position detection
9.3.4 Waste toner box full detection
9.3.5 Waste toner box new article detection
9.3.6 Waste toner spillage prevention shutter
10. PAPER FEED SECTION (MANUAL BYPASS TRAY)
10.1 Configuration
10.2 Drive
10.3 Operation
10.3.1 Up/down control
10.3.2 Paper feed control
10.3.3 Paper size detection control
10.3.4 Paper empty detection control
10.3.5 Adjustment for compatibility with heavy paper
11. PAPER FEED SECTION
11.1 Configuration
11.1.1 Tray1
11.1.2 Tray2
11.2 Drive
11.2.1 Drive
11.2.2 Layout of sensors and rollers
11.3 Operation
11.3.1 Up/down control
11.3.2 Paper feed control
11.3.3 Paper size detection control
11.3.4 Remaining paper detection control
11.3.5 Paper feed tray locking mechanism
11.3.6 Spring for thin paper use
12. VERTICAL TRANSPORT SECTION
12.1 Configuration
12.2 Drive
12.3 Operation
12.3.1 Vertical transport control
12.3.2 Transport motor control
12.3.3 Operation timing
12.3.4 Right door mechanism
13. REGISTRATION SECTION
13.1 Configuration
13.2 Drive
13.3 Operation
13.3.1 Registration control
14. FUSING SECTION (554e, IH FUSING)
14.1 Configuration
14.2 Drive
14.2.1 Roller drive of fusing section
14.2.2 Pressure Roller Crimping Drive
14.3 Operation
14.3.1 Heating roller assy heating control
14.3.2 Fusing drive release mechanism
14.3.3 Fusing speed correction
14.3.4 Fusing pressure/retraction control
14.3.5 Fusing paper transport control
14.3.6 Paper separation mechanism
14.3.7 Fusing temperature control
14.3.8 Protection against abnormal temperature
14.3.9 IH power supply control
14.3.10 Temperature sensor control
14.3.11 Fusing PPM control
14.3.12 Fusing unit new article detection
14.3.13 Fusing unit life detection
14.3.14 Fusing cooling control
15. FUSING SECTION (454e, LAMP FUSING)
15.1 Configuration
15.2 Drive
15.2.1 Fusing section roller drive
15.2.2 Pressure Roller Crimping Drive
15.3 Operation
15.3.1 Fusing drive release mechanism
15.3.2 Fusing speed correction
15.3.3 Fusing pressure/retraction control
15.3.4 Fusing paper transport control
15.3.5 Paper separation mechanism
15.3.6 Fusing temperature control
15.3.7 Protection from abnormal temperatures
15.3.8 Fusing PPM control
15.3.9 Fusing unit new article detection
15.3.10 Fusing unit life detection
15.3.11 Fusing cooling control
16. PAPER EXIT/REVERSE SECTION
16.1 Configuration
16.2 Drive
16.3 Operation
16.3.1 Transport control
16.3.2 Exit paper cooling mechanism
17. DUPLEX SECTION
17.1 Configuration
17.2 Drive
17.3 Operation
17.3.1 Paper transport control
17.3.2 Duplex circulation control
18. IMAGE STABILIZATION CONTROL
18.1 Overview
18.2 Description of control
18.2.1 IDC sensor adjustment control
18.2.2 Max. density adjustment control
18.2.3 LD (laser diode) intensity adjustment control
18.2.4 Gamma correction control
18.3 Control contents
18.3.1 Image stabilization type (mode)
18.3.2 Control sequence by mode
18.4 Operation timing
18.4.1 Predrive operation
18.4.2 During a print cycle
18.4.3 Service Mode
18.4.4 Expert Adjustment
18.4.5 Stabilization time
19. IMAGE PROCESSING
19.1 Scanner section image processing block diagram
19.2 Write section image processing block diagram
20. POWER SUPPLY SECTION
20.1 Main power switch
20.2 Power key
20.2.1 Configuration
20.2.2 Operation
20.3 Power cables
20.3.1 Configuration
20.3.2 Operation
21. FAN CONTROL
21.1 Configuration
21.1.1 bizhub 554e
21.1.2 bizhub 454e
21.2 Function
21.3 Fan control
22. COUNTER CONTROL
22.1 Configuration
22.2 Operation
23. HEATER
23.1 Configuration
23.1.1 Front side
23.1.2 Rear side
23.2 Functions
23.3 Control
24. INDICATOR FUNCTION
24.1 Configuration
24.1.1 Control panel section
24.1.2 Front side section
24.2 Control
24.2.1 Power key and Start key indicator section
24.2.2 Warning Status indicator section
24.2.3 Operation status indicator section
24.2.4 Data indicator section
24.2.5 Remaining paper level display section

PA THEORY OF OPERATION DF-701
1. CONFIGURATION
1.1 Section configuration
1.2 Paper path
1.3 Configuration
2. DRIVE
2.1 Paper feed drive
2.2 Registration drive
2.3 Document reading drive
2.4 Document reading /CIS glass cleaning drive
3. OPERATION
3.1 Document feed section
3.1.1 Document set/empty detection
3.1.2 Document size detection mechanism
3.1.3 Pick-up roller up/down control
3.1.4 Document feed/separation control
3.2 Document registration section
3.2.1 Document registration outline
3.2.2 Document registration loop formation process
3.3 Document reading section
3.3.1 Document reading section
3.3.2 Document reading roll pressure/release control
3.3.3 Document reading glass cleaning mechanism
3.3.4 CIS original reading control
3.3.5 CIS control when power is turned ON
3.3.6 CIS control when the document is loaded
3.3.7 CIS control when the start key is pressed
3.3.8 CIS glass contamination prevention control
3.3.9 CIS cover
3.4 Document exit section
3.4.1 Document exit mechanism
3.4.2 Faxed document stamp function
3.5 Paper path operation
3.6 DF open/close detection mechanism
3.6.1 Document exchange detection control
3.6.2 DF open/close detection
3.7 Cooling inside the unit mechanism
3.8 Document separation roller pressure switching mechanism

PB THEORY OF OPERATION PC-110/PC-210
1. CONFIGURATION
2. PAPER PATH
3. DRIVE
4. OPERATION
4.1 Papar feed section
4.1.1 Paper feed drive mechanism
4.1.2 Paper lifting motion
4.2 Cassette section
4.2.1 Paper size detection
4.2.2 Remaining paper display mechanism
4.3 Dehumidifier heater control (HT-509)

PC THEORY OF OPERATION PC-410
1. CONFIGURATION
2. PAPER PATH
3. DRIVE
4. OPERATION
4.1 Paper feed section
4.1.1 Paper feed drive mechanism
4.2 Main tray section
4.2.1 Main tray up / down mechanism
4.2.2 Main tray lower limit detection
4.3 Sub tray section
4.3.1 Shifter drive mechanism
4.3.2 Sub tray paper remaining amount
4.4 Remaining paper amount displayed mechanism
4.5 Dehumidifier heater control (HT-509)

PD THEORY OF OPERATION LU-204
1. SECTION CONFIGURATION
2. PAPER PATH
3. CONFIGURATION
4. DRIVE
5. OPERATION
5.1 Paper feed and transport control
5.2 Paper level detection
5.3 Paper empty detection
5.4 Paper level indicator
5.5 Tray lift-up control
5.5.1 Tray ascend/descend mechanism
5.5.2 Paper size detection
5.6 Dehumidification heater control

PE THEORY OF OPERATION LU-301
1. SECTION CONFIGURATION
2. PAPER PATH
3. CONFIGURATION
4. DRIVE
5. OPERATION
5.1 Paper feed and transport control
5.2 Paper level detection
5.3 Paper empty detection
5.4 Paper level indicator
5.5 Tray lift-up control
5.5.1 Tray ascend/descend mechanism
5.5.2 Paper size detection
5.6 Dehumidification heater control

PF THEORY OF OPERATION JS-506
1. CONFIGURATION
1.1 Paper path
1.1.1 Paper feed to the exit tray
1.2 Section configuration
1.3 Configuration
2. DRIVE
2.1 Transportation to exit tray 1
2.2 Transportation to exit tray 2
2.3 Exit tray 2 shift mechanism
3. OPERATION
3.1 Exit tray 1
3.1.1 Paper transport
3.1.2 Paper full detection
3.2 Exit tray 2
3.2.1 Paper transport
3.2.2 Paper shift mechanism
PG THEORY OF OPERATION FS-533/PK-519
1. FINISHER OUTLINE
2. PAPER PATH
2.1 Sort offset mode/Group offset mode/Staple mode/Punch mode
2.2 Non sort mode/Non group mode/Non staple mode/Sort mode/Group mode/Punch mode
3. CONFIGURATION
3.1 Section configuration
3.1.1 Section configuration
3.2 Electrical part configuration
3.3 Main mechanical part configuration
3.4 Main roller configuration
4. UNIT OPEN/CLOSE SECTION
4.1 Unit open/close mechanism
4.1.1 Finisher unit lock mechanism
4.1.2 Punch unit lock mechanism (PK-519)
5. PUNCH SECTION (PK-519)
5.1 Configuration
5.1.1 Punch kit type
5.2 Drive
5.3 Operation
5.3.1 Skew correction mechanism
5.3.2 Punch control
5.3.3 Punch holes switch control
5.3.4 Punch dust full detection control
6. TRANSPORT SECTION
6.1 Configuration
6.2 Drive
6.2.1 Drive outline
6.2.2 Paper conveyance/receiving roller section drive
6.2.3 Paper exit roller section drive
6.3 Operation
6.3.1 Paper conveyance/receiving roller section paper transport control
6.3.2 Paper exit roller section paper transport control
6.3.3 Paper exit roller up/down control
6.3.4 Paper exit roller/lower drive connecting control
7. ALIGNMENT SECTION
7.1 Configuration
7.2 Drive
7.2.1 Drive outline
7.2.2 Alignment roller section
7.2.3 Alignment tray section
7.3 Operation
7.3.1 Paper alignment overview
7.3.2 Paper alignment control (paper FD alignment)
7.3.3 Paper alignment control (paper CD alignment)
7.3.4 Alignment tray paper detect control
8. STAPLER SECTION
8.1 Configuration/Drive
8.1.1 Stapler drive section top view
8.2 Operation
8.2.1 Stapler positioning control
8.2.2 Stapling control
8.2.3 Staple empty detection control
8.2.4 Clogged staple detection control
9. RECEIVING SECTION
9.1 Configuration
9.2 Drive
9.2.1 Drive outline
9.2.2 Tray lift-up section
9.2.3 Paper level detect section
9.2.4 Paper exit roller section
9.3 Operation
9.3.1 Paper exit paddle control
9.3.2 Paper exit tray lift up control
9.3.3 Paper level detect control

PH THEORY OF OPERATION FS-534/PK-520/SD-511
1. FINISHER OUTLINE
2. PAPER PATH
2.1 Sub Tray
2.2 Main tray
2.3 Saddle tray
2.4 3rd tray
3. CONFIGURATION
3.1 Section configuration
3.2 Main electrical part configuration
3.2.1 Control board, motor
3.2.2 Sensor
3.3 Main mechanical part configuration
3.3.1 Overall configuration
3.3.2 RU section (horizontal transport section)
3.3.3 Paper feed/transport section, Alignment section, tray section
3.3.4 Punch section, staple section, exit section
3.3.5 Saddle section 1
3.3.6 Saddle section 2
3.4 Main roller configuration
4. FNS SECTION
4.1 Front door open/close detection mechanism
5. RU SECTION (HORIZONTAL TRANSPORT SECTION)
5.1 Configuration
5.1.1 Exclusive parts
5.2 Drive
5.3 Operation
5.3.1 Paper transport control
5.3.2 RU section door open/close detection mechanism
5.3.3 3rd exit tray full detection mechanism
6. PUNCH SECTION (PK-520)
6.1 Configuration
6.1.1 Punch kit type
6.2 Drive
6.3 Operation
6.3.1 Skew correction mechanism
6.3.2 Puncher up/down status detection configuration
6.3.3 Punch dust box full detection mechanism
7. TRANSPORT SECTION
7.1 Configuration
7.1.1 Paper feed section – sub tray section
7.1.2 Paper feed section – main tray section
7.1.3 Main tray section – saddle section
7.2 Drive
7.2.1 FNS entry transport motor
7.2.2 FNS discharge motor
7.2.3 Receiving roller retraction motor
7.3 Operation
7.3.1 Paper path switching mechanism
7.3.2 Receiving roller section up/down function
7.3.3 Buffer control
7.3.4 Sub tray exit mechanism
8. ALIGNMENT SECTION
8.1 Configuration
8.1.1 Upper paddle section
8.1.2 Exit section
8.1.3 Stopper section (FD alignment section)
8.1.4 Alignment tray section (CD alignment section)
8.2 Drive
8.2.1 Drive outline
8.2.2 Upper paddle section
8.2.3 Exit section
8.2.4 Stopper section
8.2.5 Alignment tray section
8.3 Operation
8.3.1 Paper transport control in alignment section
9. STAPLER SECTION
9.1 Configuration/Drive
9.1.1 Configuration
9.1.2 Drive
9.2 Operation
9.2.1 Stapler positioning control
9.2.2 Stapling control
9.2.3 Staple empty detection control
9.2.4 Clogged staple detection control
10. RECEIVING SECTION
10.1 Configuration
10.1.1 Configuration outline
10.1.2 Main tray
10.1.3 Sub tray
10.1.4 3rd tray
10.1.5 Saddle tray
10.2 Drive
10.2.1 Main tray section
10.2.2 Sub tray section
10.2.3 3re tray section
10.2.4 Saddle tray section
10.3 Operation
10.3.1 Sub tray exit mechanism
10.3.2 Main tray paper level detection control
10.3.3 Main tray upper detection mechanism
10.3.4 Tray full detection mechanism
11. SADDLE SECTION SD-511
11.1 Configuration
11.2 Transport section
11.2.1 Drive
11.2.2 Paper transport
11.2.3 Curl cover
11.3 Alignment section
11.3.1 Drive
11.3.2 Alignment
11.3.3 Stopper guide
11.4 Stapler
11.4.1 Drive
11.4.2 Operation
11.5 Folding/Saddle stitching
11.5.1 Drive
11.5.2 Folding knife
11.6 Tri-folding
11.6.1 Drive
11.6.2 Tri-folding operation
11.7 Exit section
11.7.1 Drive
11.7.2 Paper exit

PI THEORY OF OPERATION FS-535/ZU-606/PK-521/SD-512/JS-602/PI-505
1. PAPER PATH
1.1 Paper path (FS-535/SD-512/PK-521/PI-505)
1.2 Paper path (FS-535/ZU-606/JS-602)
2. CONFIGURATION
2.1 Finisher main body
2.2 Horizontal transport section
3. HORIZONTAL TRANSPORT SECTION
3.1 Drive
3.2 Operation
3.2.1 Paper horizontal transport operation
4. TRANSPORT SECTION
4.1 Drive
4.2 Operation
4.2.1 Paper transport (from the horizontal transport section to the route switching gate)
4.2.2 Route switching gate
4.2.3 Paper transport (from the route switching gate to the sub tray switching gate)
4.2.4 Switchback gate
4.2.5 Paper transport (sub tray exit/Bypass route)
4.2.6 Bypass gate
4.2.7 Sub tray switching gate
4.2.8 Sub tray exit
4.2.9 Paper transport (from the sub tray switching gate to transport roller/5)
5. ALIGNMENT SECTION
5.1 Drive
5.2 Operation
5.2.1 Paper transport (from the transport roller/5 to the alignment section)
5.2.2 Alignment plate
5.2.3 Trailing edge stopper
5.2.4 Paper transport (from the alignment section to the main tray section)
5.2.5 Stack support plate control
6. EXIT TRAY SECTION
6.1 Drive
6.2 Operation
6.2.1 Tray lift
6.2.2 Paper detection
7. STAPLER SECTION
7.1 Drive
7.2 Operation
7.2.1 Stapler movement
7.2.2 Stapler control
8. Z-FOLDING SECTION ZU-606
8.1 Configuration
8.1.1 Section configuration
8.1.2 Conveyance section
8.1.3 Punch section
8.1.4 Punch scraps conveyance section
8.1.5 Z-folding section
8.2 Drive
8.2.1 Conveyance section
8.2.2 Punch section
8.2.3 Punch scraps conveyance section
8.2.4 Z-folding section
8.3 Operation
8.3.1 Conveyance path switching
8.3.2 Conveyance line speed switching
8.3.3 Registration control
8.3.4 Punch section operation outline
8.3.5 Punch control
8.3.6 Punch position movement control
8.3.7 Punch hole switching control
8.3.8 Punch scraps conveyance control
8.3.9 Punch scraps control
8.3.10 1st folding control
8.3.11 2nd folding control
9. PUNCH SECTION PK-521
9.1 Configuration
9.2 Drive
9.2.1 Punch shift section
9.2.2 Punch section
9.2.3 Punch scraps box section
9.3 Operation
9.3.1 Punch standby position movement control
9.3.2 Punch position correction control
9.3.3 Punch control
9.3.4 Punch scraps box control
10. SADDLE SECTION SD-512
10.1 Configuration
10.2 Transport section
10.2.1 Drive
10.2.2 Paper transport
10.2.3 Paper receiving guide
10.3 Alignment section
10.3.1 Drive
10.3.2 Alignment
10.3.3 Stopper guide
10.4 Stapler
10.4.1 Drive
10.4.2 Operation
10.5 Folding/Saddle stitching
10.5.1 Drive
10.5.2 Folding knife
10.6 Tri-folding
10.6.1 Drive
10.6.2 Tri-folding operation
10.7 Exit section
10.7.1 Drive
10.7.2 Paper exit
10.7.3 Paper transport belt
11. JOB TRAY JS-602
11.1 Configuration
11.2 Drive
11.3 Operation
11.3.1 Job tray paper transport mechanism
12. POST INSERT SECTION PI-505
12.1 Configuration
12.2 Drive
12.2.1 Paper feed drive
12.2.2 Tray lift drive
12.3 Operation
12.3.1 Tray lift mechanism
12.3.2 Pick-up mechanism
12.3.3 Separation mechanism
12.3.4 Registration control
12.3.5 Paper size detection control

PJ THEORY OF OPERATION AU-102/AU-201/OT-503
1. AU-102
1.1 Configuration
1.2 Operation
2. AU-201
2.1 Configuration
2.2 Operation
3. OT-503
3.1 Configuration
3.2 Operation

PK THEORY OF OPERATION EK-606/EK-607/SC-508
1. EK-606
1.1 Configuration
1.2 Operation
2. EK-607
2.1 Configuration
2.2 Operation
3. SC-508
3.1 Configuration
3.2 Operation

PL THEORY OF OPERATION UK-208/UK-209
1. CONFIGURATION
2. OPERATION
2.1 Outline
2.2 Connection metting
2.2.1 Default setting

PM THEORY OF OPERATION FK-508/FK-511
1. COMMUNICATION CONTROL
1.1 FIF bits of DIS, DTC and DCS
1.1.1 FIF data configuration list (DIS/DTC)
1.1.2 FIF data configuration list (DCS)
1.2 Modem fallback sequence
1.2.1 V17, V29, and V27 ter
1.2.2 V34
1.3 V8/V34 sequence
1.3.1 V34
1.3.2 Sample of a signal procedure at sending two pages
1.3.3 Procedure details
1.3.4 Common signal bit definition
1.3.5 Phase 2 (Probing)
1.3.6 Phase 3
1.3.7 Re-synchronization procedure / Startup procedure
1.3.8 Others
2. FUNCTION
2.1 Telephone function
2.1.1 TEL/FAX switching
2.2 F-code
2.2.1 Signal format
2.2.2 F-code confidential transmission
2.2.3 F-code bulletin board polling
2.2.4 F-code relay transmission
2.3 Transmission function
2.3.1 Original scan mode
2.4 Reception function
2.4.1 Reduction / division of reception
2.4.2 Cassette / paper selection
2.4.3 Compulsory memory reception
2.4.4 Closed reception (Junk FAX)

& Parts List Manual Konica Minolta Bizhub 554e Bizhub 454e

Total number of pages: 2119.