Konica Minolta Bizhub 652 Bizhub 552 Bizhub 602 Bizhub 502 Field Service Manual

Field Service Manual Konica Minolta Bizhub 652 Bizhub 552 Bizhub 602 Bizhub 502;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Konica Minolta Bizhub copier.
You can print, zoom or read any diagram, picture or page from this Field Service Manual. Every chapter on this manual is fully detailed and contain all theĀ  simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Konica Minolta Bizhub 652 Bizhub 552 Bizhub 602 Bizhub 502 photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

OUTLINE
1. SYSTEM CONFIGURATION
1.1 Bizhub 652/552/602/502
2. PRODUCT SPECIFICATIONS
2.1 Type
2.2 Functions
2.3 Paper
2.4 Materials
2.5 Print volume
2.6 Machine specifications
2.7 Operating environment
2.8 Print functions
2.9 Scan functions

MAINTENANCE
3. PERIODICAL MAINTENANCE ITEMS
3.1 Concept of periodical maintenance
3.1.1 Main body
3.1.2 Automatic document feeder (ADF)
3.1.3 LU-204/301
3.1.4 ZU-606
3.1.5 FS-526
3.1.6 SD-508
3.1.7 PK-516
3.1.8 JS-602
3.1.9 PI-505
3.1.10 FS-527
3.2 Periodical replacement parts list
3.2.1 Main body
3.2.2 Option
3.3 Periodical cleaning parts list
3.3.1 Main body
3.3.2 Option
3.4 CMS corresponding parts
3.4.1 CMS corresponding parts
3.4.2 CMS corresponding parts list
3.4.3 Replacing CMS corresponding parts as a set
3.5 Concept of parts life
3.5.1 Life value of consumables and parts
3.5.2 Conditions for life specifications values
3.5.3 Control causing inhibited printing for one part when an inhibited-printing event occurs in another part
4. PERIODICAL MAINTENANCE PROCEDURE
4.1 Housing section
4.1.1 Replacing the ozone filter
4.1.2 Replacing the toner filter
4.2 Write section
4.2.1 Cleaning of the PH window
4.2.2 Replacing the drum unit
4.3 Developing section
4.3.1 Replacing the developing unit
4.4 Toner supply section
4.4.1 Replacing the toner cartridge
4.5 1st transfer section
4.5.1 Replacing the transfer belt unit
4.6 2nd transfer/separation section
4.6.1 Replacing the transfer roller unit
4.7 Toner collection section
4.7.1 Cleaning of the area around the waste toner collecting port
4.7.2 Replacing the waste toner box
4.8 Paper feed section
4.8.1 Replacing the tray 1 feed roller/tray 1 pick-up roller
4.8.2 Replacing the tray 1 separation roller assy
4.8.3 Replacing the tray 2 feed roller/tray 2 pick-up roller
4.8.4 Replacing the tray 2 separation roller assy
4.8.5 Replacing the tray 3 feed roller/tray 3 pick-up roller
4.8.6 Replacing the tray 3 separation roller
4.8.7 Replacing the tray 4 feed roller/tray 4 pick-up roller
4.8.8 Replacing the tray 4 separation roller
4.8.9 Replacing the manual bypass tray feed roller/manual bypass tray pick-up roller
4.8.10 Replacing the manual bypass tray separation roller assy
4.9 Vertical conveyance section
4.9.1 Cleaning of the paper dust remover
4.10 Registration section
4.10.1 Cleaning of the timing roller
4.11 Fusing section
4.11.1 Replacing the fusing unit
4.11.2 Cleaning of the IH coil unit
4.12 Duplex section
4.12.1 Cleaning of the duplex transport rollers
5. OTHER MAINTENANCE ITEMS
5.1 Disassembly/adjustment prohibited items
5.1.1 CCD unit
5.1.2 PH unit
5.1.3 Fusing unit
5.2 Disassembly/reassembly parts list
5.3 Cleaning parts list
5.4 Need lubrication parts list
5.5 Disassembly/reassembly procedure
5.5.1 Upper front door
5.5.2 Lower front door
5.5.3 Upper front cover /1
5.5.4 Upper front cover /2
5.5.5 Right front cover
5.5.6 Lower front cover
5.5.7 Upper left cover
5.5.8 Lower left cover
5.5.9 Rear left cover
5.5.10 Paper exit rear cover
5.5.11 Scanner rear cover
5.5.12 Scanner right cover
5.5.13 Scanner upper rear cover/1
5.5.14 Scanner upper rear cover/2
5.5.15 Scanner left cover
5.5.16 Scanner upper front cover
5.5.17 Scanner front cover
5.5.18 USB interface cover
5.5.19 Original glass
5.5.20 Interface cover/1
5.5.21 Interface cover/2
5.5.22 Rear right cover/1
5.5.23 Rear right cover/2
5.5.24 Manual bypass tray rear cover
5.5.25 Upper rear cover/1
5.5.26 Upper rear cover/2
5.5.27 Lower rear cover
5.5.28 Front right cover
5.5.29 Control panel assy
5.5.30 Exit tray (option: OT-503)
5.5.31 Tray 1/2
5.5.32 Tray 3/4
5.5.33 PH unit
5.5.34 Duplex unit
5.5.35 Manual bypass tray unit
5.5.36 CCD unit
5.5.37 Original glass moving unit
5.5.38 Glass step sheet
5.5.39 Exposure unit
5.5.40 Hard disk
5.5.41 IH coil (FH1)
5.5.42 Intermediate transport roller assy
5.5.43 Main drive unit
5.5.44 LCC drive unit
5.5.45 Scanner chassis
5.5.46 Scanner relay board (REYB/SCAN)
5.5.47 Original glass position control board (OGPCB)
5.5.48 Inverter board (INVB)
5.5.49 PH relay board (REYB/PH)
5.5.50 Paper feed/transport drive board (PFTDB)
5.5.51 DC power supply (DCPU)
5.5.52 Relay drive board (REDB)
5.5.53 Printer control board (PRCB)
5.5.54 How to open PWB box/1
5.5.55 PCI board (PCIB)
5.5.56 MFP board (MFPB)
5.5.57 How to open PWB box/2
5.5.58 High voltage unit/2 (HV2)
5.5.59 Service EEPROM board (SV ERB)
5.5.60 High voltage unit/1 (HV1)
5.5.61 IH power supply (IHPU)
5.5.62 Paper size detect board/1 (PSDTB/1)
5.5.63 Paper size detect board/2 (PSDTB/2)
5.5.64 ADU transport motor/1 (M31)
5.5.65 ADU transport motor/2 (M32)
5.5.66 Bypass tray up down motor (M28) / bypass paper feed motor (M27)
5.5.67 Scanner motor (M201)
5.5.68 Original glass moving motor (M202)
5.5.69 Waste toner agitating motor (M20)
5.5.70 Transport motor (M25)
5.5.71 Vertical transport motor (M26)
5.5.72 Transfer belt motor (M1)
5.5.73 2nd image transfer pressure retraction motor (M3)
5.5.74 Registration motor (M2)
5.5.75 Fusing pressure retraction motor (M29)
5.5.76 Fusing motor (M30)
5.5.77 Switchback motor (M33)
5.5.78 Exit motor (M4)
5.5.79 K PC drum motor (M18)
5.5.80 K developing motor (M19)
5.5.81 Tray1 lift-up motor (M6)
5.5.82 Tray2 lift-up motor (M8)
5.5.83 Tray3 lift-up motor (M23)
5.5.84 Tray4 lift-up motor (M24)
5.5.85 Tray1 vertical transport motor (M5)
5.5.86 Tray2 vertical transport motor (M7)
5.5.87 Take-up motor (M22)
5.5.88 Charge cleaning motor/K (M15)
5.5.89 Cleaner motor (M38)
5.5.90 1st image transfer pressure retraction motor (M21)
5.5.91 Toner cartridge motor C/K (M14)
5.5.92 Toner supply motor/K (M12)
5.5.93 Tray 1 paper feed clutch (CL1)
5.5.94 Tray 2 paper feed clutch 2 (CL2)
5.5.95 Horizontal transport clutch (CL3)
5.5.96 Tray 3 paper feed clutch (CL5)/Tray 3 transport clutch (CL6)
5.5.97 Tray 4 paper feed clutch (CL7)
5.5.98 IDC registration sensor/F (IDCS/F)
5.5.99 Scanner drive cables
5.5.100 Tray 3/4 lift wire
5.6 Cleaning procedure
5.6.1 Transfer belt unit
5.6.2 Tray 1 feed roller/tray 1 pick-up roller
5.6.3 Tray 1 separation roller
5.6.4 Tray 1 transport roller
5.6.5 Tray 2 feed roller/tray 2 pick-up roller
5.6.6 Tray 2 separation roller
5.6.7 Tray 2 transport roller
5.6.8 Tray 3 feed roller/tray 3 pick-up roller
5.6.9 Tray 3 separation roller
5.6.10 Tray 3 transport roller
5.6.11 Tray 4 feed roller/tray 4 pick-up roller
5.6.12 Tray 4 separation roller
5.6.13 Tray 4 transport roller
5.6.14 Manual bypass tray feed roller
5.6.15 Manual bypass tray pick-up roller
5.6.16 Manual bypass tray separation roller
5.6.17 Intermediate transport roller
5.6.18 Original glass
5.6.19 Scanner rails
5.6.20 Mirrors (1st/2nd/3rd)
5.6.21 Lens
5.6.22 CCD sensor
5.7 Lubrication procedure
5.7.1 Fusing unit
6. SERVICE TOOL
6.1 Service material list
6.2 CE tool list
7. FIRMWARE REWRITING
7.1 Outline
7.2 USB memory
7.2.1 Preparation
7.2.2 Procedure
7.2.3 Action when data transfer fails
7.3 Updating the firmware with the Internet ISW
7.3.1 Outline
7.3.2 Service environment
7.3.3 Preparations for firmware rewriting
7.3.4 Firmware rewriting from the control panel
7.3.5 Firmware rewriting from the CS Remote Care
7.3.6 Error code list for the Internet ISW
8. COMMERCIALLY AVAILABLE PARTS
8.1 Installing the key counter
8.1.1 Configuration
8.1.2 Procedure
8.2 Installing the original size detection 2 sensor (PS205)
8.2.1 Procedure

ADJUSTMENT/SETTING
9. HOW TO USE THE ADJUSTMENT/SETTING SECTION
10. UTILITY
10.1 List of utility mode
10.2 Starting/Exiting
10.2.1 Starting procedure
10.2.2 Exiting procedure
10.3 Touch Panel Adjustment
10.4 One-Touch User Box Registration
10.4.1 Create One-Touch destination-Address Book (Public)/(Personal)
10.4.2 Create One-Touch destination-Group
10.4.3 Create One-Touch destination-E-mail Settings
10.4.4 Create User Box
10.4.5 Create User Box-Public/Personal User Box
10.4.6 Create User Box-Bulletin Board User Box
10.4.7 Create User Box-Relay User Box
10.4.8 Limiting Access to Destinations
10.4.9 Limiting Access to Destinations-Apply Levels/Groups to Destinations
10.5 User Settings
10.5.1 System Settings-Language Selection
10.5.2 System Settings-Measurement Unit Settings
10.5.3 System Settings-Paper Tray Settings
10.5.4 System Settings-Auto Color Level Adjust
10.5.5 System Settings-Power Save Settings
10.5.6 System Settings-Output Settings
10.5.7 System Settings-AE Level Adjustment
10.5.8 System Settings-Auto Paper Select for Small Original
10.5.9 System Settings-Blank Page Print Settings
10.5.10 System Settings-Page Number Print Position
10.5.11 System Settings-Select Keyboard
10.5.12 Custom Display Settings-Copier Settings
10.5.13 Custom Display Settings-Scan/Fax Settings
10.5.14 Custom Display Settings-User Box Settings
10.5.15 Custom Display Settings-Copy Screen
10.5.16 Custom Display Settings-Fax Active Screen
10.5.17 Custom Display Settings-Color Selection Settings
10.5.18 Custom Display Settings-Left Panel Display Default
10.5.19 Custom Display Settings-Search Option Settings
10.5.20 Copier Settings-Auto Booklet ON when Fold & Staple
10.5.21 Copier Settings-Auto Zoom for Combine/Booklet
10.5.22 Copier Settings-Auto Sort/Group Selection
10.5.23 Copier Settings-Default Copy Settings
10.5.24 Copier Settings-Default Enlarge Display Settings
10.5.25 Copier Settings-When AMS Direction is Incorrect
10.5.26 Copier Settings-Separate Scan Output Method
10.5.27 Copier Settings-Enlargement Rotation
10.5.28 Copier Settings-Auto Zoom (Platen)
10.5.29 Copier Settings-Auto Zoom (ADF)
10.5.30 Copier Settings-Specify Default Tray when APS Off
10.5.31 Copier Settings-Select Tray for Insert Sheet
10.5.32 Copier Settings-Tri-Fold Print Side
10.5.33 Copier Settings-Half-Fold/Tri-Fold Specification
10.5.34 Copier Settings-Half-Fold Specification
10.5.35 Copier Settings-Print Jobs During Copy Operation
10.5.36 Copier Settings-Automatic Image Rotation
10.5.37 Copier Settings-Finishing Program
10.5.38 Copier Settings-Card Shot Settings
10.5.39 Scan/Fax Settings-JPEG Compression Level
10.5.40 Scan/Fax Settings-Black Compression Level
10.5.41 Scan/Fax Settings-TWAIN Lock Time
10.5.42 Scan/Fax Settings-Default Scan/Fax Settings
10.5.43 Scan/Fax Settings-Default Enlarge Display Settings
10.5.44 Scan/Fax Settings-Compact PDF/XPS Compression Level
10.5.45 Scan/Fax Settings-Color TIFF Type
10.5.46 Scan/Fax Settings-OCR Operation Setting
10.5.47 Scan/Fax Settings-Graphic Outlining
10.5.48 Printer Settings-Basic Settings
10.5.49 Printer Settings-Paper Setting
10.5.50 Printer Settings-PCL Settings
10.5.51 Printer Settings-PS Setting
10.5.52 Printer Settings-XPS Settings
10.5.53 Printer Settings-Print Reports
10.5.54 Printer Settings-TIFF Image Paper Setting
10.5.55 Change Password
10.5.56 Change E-mail Address
10.5.57 Change Icon
10.5.58 Register Authentication Settings
10.5.59 Registered Application Setting-Default Application Selection
10.5.60 Cellular Phone/PDA Setting-Link File Error Notification
10.5.61 Cellular Phone/PDA Setting-Proxy Server Use
10.5.62 Cellular Phone/PDA Setting-Print
10.6 Administrator Settings
10.6.1 System Settings-Power Save Settings
10.6.2 System Settings-Output Settings
10.6.3 System Settings-Date/Time Settings
10.6.4 System Settings-Daylight Saving Time
10.6.5 System Settings-Weekly Timer Settings
10.6.6 System Settings-Restrict User Access
10.6.7 System Settings-Expert Adjustment
10.6.8 System Settings-List/Counter
10.6.9 System Settings-Reset Settings
10.6.10 System Settings-User Box Settings
10.6.11 System Settings-Standard Size Setting
10.6.12 System Settings-Stamp Settings
10.6.13 System Settings-Blank Page Print Settings
10.6.14 System Settings-Application Key Settings
10.6.15 System Settings-Skip Job Operation Settings
10.6.16 System Settings-Default Bypass Paper Type Setting
10.6.17 System Settings-Page Number Print Position
10.6.18 System Settings-Advanced Preview Setting
10.6.19 Administrator/Machine Settings-Administrator Registration
10.6.20 Administrator/Machine Settings-Input Machine Address
10.6.21 One-Touch/User Box Registration-Create One-Touch Destination
10.6.22 One-Touch/User Box Registration-Create User Box
10.6.23 One-Touch/User Box Registration-One-Touch/User Box Registration List 348
10.6.24 One-Touch/User Box Registration-Maximum Number of User Boxes
10.6.25 User Authentication/Account Track-General Settings
10.6.26 User Authentication/Account Track-User Authentication Setting
10.6.27 User Authentication/Account Track-Account Track Setting
10.6.28 User Authentication/Account Track-Print without Authentication
10.6.29 User Authentication/Account Track-Print Counter List
10.6.30 User Authentication/Account Track-External Server Settings
10.6.31 User Authentication/Account Track-Limiting Access to Destinations
10.6.32 User Authentication/Account Track-Authentication Device Settings
10.6.33 User Authentication/Account Track-User/Account Common Setting
10.6.34 User Authentication/Account Track-Scan to Home Settings
10.6.35 User Authentication/Account Track-Scan to Authorized Folder Settings
10.6.36 Network Settings-TCP/IP Settings
10.6.37 Network Setting-NetWare Settings
10.6.38 Network Setting-http Server Settings
10.6.39 Network Setting-FTP Settings
10.6.40 Network Setting-SMB Setting
10.6.41 Network Setting-LDAP Settings
10.6.42 Network Setting-E-mail Settings
10.6.43 Network Setting-SNMP Setting
10.6.44 Network Setting-AppleTalk Settings
10.6.45 Network Setting-Bonjour Setting
10.6.46 Network Setting-TCP Socket Settings
10.6.47 Network Setting-Network Fax Setting
10.6.48 Network Setting-WebDAV Settings
10.6.49 Network Setting-Web Service Settings
10.6.50 Network Setting-SSDP Settings
10.6.51 Network Setting-Detail Settings
10.6.52 Network Settings-IEEE802.1X Authentication Settings
10.6.53 Network Settings-Web Browser Setting
10.6.54 Network Settings-Bluetooth Setting
10.6.55 Copier Settings-Auto Zoom (Platen)
10.6.56 Copier Settings-Auto Zoom (ADF)
10.6.57 Copier Settings-Specify Default Tray when APS OFF
10.6.58 Copier Settings-Print Jobs During Copy Operation
10.6.59 Copier Settings-Tri-Fold Print Side
10.6.60 Copier Settings-Automatic Image Rotation
10.6.61 Printer Settings-USB Timeout
10.6.62 Printer Settings-Network Timeout
10.6.63 Printer Settings-Print XPS Errors
10.6.64 Printer Settings-PSWC Direct Print
10.6.65 Printer Settings-Assign Account to Acquire Device Info
10.6.66 Fax Settings
10.6.67 Fax Settings-Header Information
10.6.68 Fax Settings-Header/Footer Position
10.6.69 Fax Settings-Line Parameter Setting
10.6.70 Fax Settings-TX/RX Settings
10.6.71 Fax Settings-Function Settings
10.6.72 Fax Settings-PBX Connection Setting
10.6.73 Fax Settings-Report Settings
10.6.74 Fax Settings-Job Settings List
10.6.75 Fax Settings-Multi Lines Settings
10.6.76 Fax Settings-Network Fax Settings
10.6.77 Fax Print Quality Settings
10.6.78 System Connection-OpenAPI Settings
10.6.79 System Connection-Call Remote Center
10.6.80 System Connection-Prefix/Suffix Automatic Setting
10.6.81 System Connection-Printer Information
10.6.82 System Connection-Cellular Phone/PDA Setting
10.6.83 Security Settings-Administrator Password
10.6.84 Security Settings-User Box Admin. Setting
10.6.85 Security Settings-Administrator Security Levels
10.6.86 Security Settings-Security Details
10.6.87 Security Settings-Enhanced Security Mode
10.6.88 Security Settings-HDD Settings
10.6.89 Security Settings-Function Management Setting
10.6.90 Security Settings-Stamp Settings
10.6.91 Security Settings-Image Log Transfer Settings
10.6.92 Security Settings-Driver Password Encryption Setting
10.6.93 License Settings-Get Request Code
10.6.94 License Settings-Install License
10.6.95 License Settings-List of Enabled Functions
10.6.96 OpenAPI Authentication Management-Restriction Code Setting
10.7 Banner Printing
10.8 My Panel Settings
10.9 Device Information
11. ADJUSTMENT ITEM LIST
12. SERVICE MODE
12.1 List of service mode
12.2 Starting/Exiting
12.2.1 Starting procedure
12.3 Date/Time Input mode
12.4 Machine
12.4.1 Trail Edge Color Alignment Adj
12.4.2 Fusing Temperature
12.4.3 Fusing Transport Speed
12.4.4 Org. Size Detecting Sensor Adj
12.4.5 Printer Area-Leading Edge Adjustment
12.4.6 Printer Area-Printer Image Centering Side 1
12.4.7 Printer Area-Leading Edge Adj. Side 2 (Duplex)
12.4.8 Printer Area-Prt. Image Center. Side 2 (Dup)
12.4.9 Printer Area-Paper Feed Direction Adj
12.4.10 Scan Area
12.4.11 Scan Area-Image Position: Leading Edge
12.4.12 Scan Area-Scanner Image Centering
12.4.13 Scan Area-Main Scan Zoom Adj
12.4.14 Scan Area-Sub Scan Zoom Adj
12.4.15 Printer Reg. Loop Adj
12.4.16 LD adjustment-LD Timing Adj
12.4.17 LD adjustment-LD 1/2 Balance Adj
12.4.18 Manual Bypass Tray Width Adj
12.4.19 Lead Edge Erase Adjustment
12.4.20 Thick Paper Interval Setting
12.4.21 ADF Scan Glass Contamination
12.4.22 Non-Image Area Erase Check
12.5 Firmware Version
12.6 Imaging Process Adjustment
12.6.1 Gradation Adjust
12.6.2 Transfer Belt-Cleaning Bias
12.6.3 Transfer Belt-Auto Cleaning
12.6.4 Max Image Density Adj
12.6.5 TCR Level Setting
12.6.6 Image Background Adj
12.6.7 Transfer Voltage Fine Adj-Primary transfer adj
12.6.8 Transfer Voltage Fine Adj-Secondary transfer adj
12.6.9 Stabilizer-Stabilization Only
12.6.10 Stabilizer-Initialize+Image Stabilization
12.6.11 Thick Paper Density Adjustment
12.6.12 Paper separation adjustment
12.6.13 Manual Toner Add
12.6.14 Grad/Dev AC Bias V Selection
12.7 CS Remote Care
12.7.1 Outlines
12.7.2 Setting up the CS Remote Care
12.7.3 Software SW setting for CS Remote Care
12.7.4 Setup confirmation
12.7.5 Calling the maintenance
12.7.6 Calling the center from the administrator
12.7.7 Checking the transmission log
12.7.8 Detail on settings
12.7.9 List of the CS Remote Care error code
12.7.10 Troubleshooting for CS Remote Care
12.7.11 CS Remote Care Operation under Enhanced Security Mode
12.8 System 1
12.8.1 Marketing Area
12.8.2 Tel/Fax Number
12.8.3 Serial Number
12.8.4 Sleep ON/OFF Choice Setting
12.8.5 Foolscap Size Setting
12.8.6 Original Size Detection
12.8.7 Install Date
12.8.8 Initialization-Clear All Data
12.8.9 Initialization-Clear Individual Data
12.8.10 Initialization-System Error Clear
12.8.11 Charging CH cleaning-K Charge Manual Cleaning
12.8.12 Charging CH cleaning-K Charge A/C ON/OFF Setting
12.8.13 Problem Unit Isolation Set
12.8.14 Post card transfer table
12.8.15 Machine State LED Setting
12.9 System 2
12.9.1 HDD
12.9.2 Image Controller Setting
12.9.3 Option Board Status
12.9.4 Consumable Life Reminder
12.9.5 Unit Change
12.9.6 Software Switch Setting
12.9.7 CCD Calibration
12.9.8 LCC Size Setting
12.9.9 LCT Paper Size Setting
12.9.10 Line Mag Setting
12.9.11 Data Capture
12.9.12 ADF Scan Glass Contamin. Set
12.9.13 ADF Scan Glass Contamin. Set.-ADF Scan Glass Contamin. Sensitivity
12.9.14 ADF Scan Glass Contamin. Set.-ADF Scan Glass Contamin. Warn/Level
12.9.15 ADF Scan Glass Contamin. Set.-Feed Cleaning Setting
12.9.16 Stamp
12.9.17 Network Fax Settings
12.9.18 User Paper Settings
12.9.19 Coverage Rate Screen
12.9.20 JAM Code Display Setting
12.9.21 BootUp Screen
12.9.22 Install Data
12.9.23 Bluetooth Settings
12.9.24 Auto Power OFF
12.10 Counter
12.10.1 Common procedure
12.10.2 Life
12.10.3 Service Call
12.10.4 Section Service Call
12.10.5 Warning
12.10.6 Maintenance
12.10.7 Service Total
12.10.8 Counter of Each Mode
12.10.9 Service Call History (Data)
12.10.10 ADF Paper Pages
12.10.11 Paper Jam History
12.10.12 Fax Connection Error
12.10.13 ADF Scan Glass Contamin. Counter
12.10.14 Parts Counter (Fixed)
12.10.15 Jam
12.10.16 Section JAM
12.11 List Output
12.11.1 Batch List CSV Output
12.11.2 Machine Management List
12.11.3 Adjustment List
12.11.4 Parameter List
12.11.5 Service Parameter
12.11.6 Protocol Trace
12.11.7 Fax Setting List
12.11.8 Fax Analysis List
12.12 State Confirmation
12.12.1 Sensor Check
12.12.2 Sensor check screens
12.12.3 Sensor check list
12.12.4 Table Number
12.12.5 Level History1
12.12.6 Level History 2
12.12.7 Temp. & Humidity
12.12.8 CCD Check
12.12.9 Memory/HDD Adj.-Memory Check
12.12.10 Memory/HDD Adj.-Compress / Decompression Check
12.12.11 Memory/HDD Adj.-JPEG Check
12.12.12 Memory/HDD Adj.-Memory Bus Check
12.12.13 Memory/HDD Adj.-DSC Bus Check
12.12.14 Memory/HDD Adj.-HDD R/W Check
12.12.15 Memory/HDD Adj.-HDD Format
12.12.16 Memory/HDD Adj.-SSD ? HDD Data Copy
12.12.17 Memory/HDD State
12.12.18 IU Lot No
12.12.19 Adjustment Data List
12.13 Test Mode
12.13.1 Procedure for test pattern output
12.13.2 Gradation Pattern
12.13.3 Halftone Pattern
12.13.4 Lattice Pattern
12.13.5 Solid Pattern
12.13.6 Paper Passage Test
12.13.7 Fax Test
12.14 ADF
12.14.1 Original Stop Position
12.14.2 Registration Loop Adj
12.14.3 Auto Stop Position Adjustment
12.14.4 Paper Passage
12.14.5 Sensor Check
12.14.6 Original Tray Width
12.14.7 Read Pos Adj
12.14.8 Feed Zoom
12.14.9 Scanning Light Adjustment
12.14.10 Mixed original Size adjustment
12.15 FAX
12.16 Finisher
12.16.1 FS-FN adjustment – Center Staple Position
12.16.2 FS-FN adjustment – Half-Fold Position
12.16.3 FS-FN adjustment – Punch Centering Fine Adj
12.16.4 FS-FN adjustment – Punch Edge Adj
12.16.5 FS-FN adjustment – Punch F. Sensor Intensity Adj
12.16.6 FS-FN adjustment – Punch vertical position (Z-fold)
12.16.7 FS-FN adjustment – Punch horizontal position (Z-fold)
12.16.8 FS-FN adjustment – Punch regist adj. (Z-fold)
12.16.9 FS-FN adjustment – Punch Registration Loop Adj
12.16.10 FS-FN adjustment – Punch Resist Loop Size (PI)
12.16.11 FS-FN adjustment – 1st Z-Fold Position
FS-FN adjustment – 2nd Z-Fold Position
12.16.12 FS-FN adjustment – Tri-Fold Position
12.16.13 FS-FN adjustment – Center-Staple Pitch Adj
12.16.14 FS-FN adjustment – PI Size Detection
12.16.15 FS-FN adjustment – Post Inserter Adjustment
12.16.16 FS-FN adjustment – Finisher Components Test Mode
12.16.17 FS-FN adjustment – Load Data
12.16.18 FS-FN adjustment – Paper Alignment Guides W. Adj
12.16.19 FS-FN adjustment – Punch unit edge detection
12.16.20 Max Staple Limit Setting
12.16.21 Punch Option Setting
12.16.22 Max. # of Folded Sheets Setting
12.17 Internet ISW
12.17.1 Internet ISW Set
12.17.2 HTTP Setting
12.17.3 HTTP Setting-Data Input Setting
12.17.4 HTTP Setting-Connect Proxy
12.17.5 HTTP Setting-Proxy Server
12.17.6 HTTP Setting-Proxy Authentication
12.17.7 HTTP Setting-Connection Time-Out
12.17.8 FTP Setting
12.17.9 FTP Setting-Data Input Setting
12.17.10 FTP Setting-Connect Proxy
12.17.11 FTP Setting-Proxy Server
12.17.12 FTP Setting-Connection Setting
12.17.13 Forwarding Access Setting-User ID
12.17.14 Forwarding Access Setting-Password
12.17.15 Forwarding Access Setting-URL
12.17.16 Forwarding Access Setting-FileName
12.17.17 Download
13. ENHANCED SECURITY
13.1 List of Enhanced Security
13.2 Starting/Exiting
13.2.1 Starting procedure
13.2.2 Exiting procedure
13.3 Enhanced Security
13.3.1 CE Password
13.3.2 Administrator Password
13.3.3 Administrator Feature Level
13.3.4 CE Authentication
13.3.5 Life Stop Setting
13.3.6 NVRAM Data Backup
13.3.7 Operation Ban release time
13.3.8 Administrator unlocking
13.3.9 Engine FW DipSW
14. BILLING SETTING
14.1 List of billing setting
14.2 Starting/Exiting
14.2.1 Starting procedure
14.2.2 Exiting procedure
14.3 Billing Setting
14.3.1 Counter Setting
14.3.2 Management Function Choice
14.3.3 Management Function Choice-Key Counter IF Vendor
14.3.4 Management Function Choice-Authentication Device 1
14.3.5 Management Function Choice-Authentication Device 2
14.3.6 Management Function Choice-Key Counter Only
14.3.7 Management Function Choice-Management Device 1
14.3.8 Management Function Choice-Management Device 2
14.3.9 Management Function Choice-Vendor 1
14.3.10 Management Function Choice-Vendor 2
14.3.11 Coverage Rate Clear
14.3.12 OpenAPI Authentication Management-Restriction Code
14.3.13 OpenAPI Authentication Management-Region Code
15. CONTENTS TO BE CLEARED BY RESET FUNCTION
16. MECHANICAL ADJUSTMENT
16.1 Mechanical adjustment of the scanner section
16.1.1 Adjustment of the scanner motor belt
16.1.2 Focus positioning of the scanner and mirrors unit
16.1.3 Scanner position adjustment
16.1.4 Adjusting the height of the original glass moving unit
16.1.5 Adjusting the height of the guide support for the original glass moving unit
16.2 Mechanical adjustment of the paper feed section
16.2.1 Tray3/4 paper size change
16.2.2 Skew adjustment of the tray 1/2
16.2.3 Centering adjustment of the tray 1/2
16.2.4 Centering adjustment of the tray 3/4
16.2.5 Pick-up roller load adjustment of the tray 3/4
16.3 Mechanical adjustment of the bypass tray section
16.3.1 Adjustment of the bypass paper size unit

TROUBLESHOOTING
17. JAM DISPLAY
17.1 List of JAM code
17.1.1 Misfeed display resetting procedure
17.2 Sensor layout
17.2.1 Main body
17.2.2 ADF
17.2.3 LU-204/LU-301
17.2.4 ZU-606
17.2.5 FS-526/SD-508/PK-516
17.2.6 JS-602
17.2.7 PI-505
17.2.8 FS-527/SD-509/PK-517/JS-603
17.3 Solution
17.3.1 Initial check items
17.3.2 Misfeed at manual bypass feed section
17.3.3 Misfeed at tray 1 feed section
17.3.4 Misfeed at tray 2 feed section
17.3.5 Misfeed at tray 3 feed section
17.3.6 Misfeed at tray 4 feed section
17.3.7 Misfeed at tray 3/4 horizontal transport section
17.3.8 Misfeed at tray 3/4 intermediate transport roller section
17.3.9 LCT feed section
17.3.10 LCT transport section
17.3.11 Misfeed at vertical transport section
17.3.12 Misfeed at 2nd transfer section
17.3.13 Misfeed at exit section
17.3.14 ADF turnover section
17.3.15 ADF paper feed section
17.3.16 ADF transport section
17.3.17 ADF paper exit section
17.3.18 ADF image reading section
17.3.19 Code: 72-11
17.3.20 Code: 72-13
17.3.21 Code: 72-14
17.3.22 Code: 72-15
17.3.23 Code: 72-16
17.3.24 Code: 72-17
17.3.25 Code: 72-18
17.3.26 Code: 72-19
17.3.27 Code: 72-21
17.3.28 Code: 72-22
17.3.29 Code: 72-23
17.3.30 Code: 72-25 / 72-26
17.3.31 Code: 72-31 / 72-34
17.3.32 Code: 72-35
17.3.33 Code: 72-38
17.3.34 Code: 72-39
17.3.35 Code: 72-40
17.3.36 Code: 72-41 / 72-42
17.3.37 Code: 72-43
17.3.38 Code: 72-44
17.3.39 Code: 72-45
17.3.40 Code: 72-46
17.3.41 Code: 72-47
17.3.42 Code: 72-49
17.3.43 Code: 72-50
17.3.44 Code: 72-51
17.3.45 Code: 72-60
17.3.46 Code: 72-61
17.3.47 Code: 72-62
17.3.48 Code: 72-64
17.3.49 Code: 72-81
17.3.50 Code: 72-84
17.3.51 Code: 72-85
17.3.52 Code: 72-86
17.3.53 Code: 72-87
17.3.54 Code: 72-90
17.3.55 Code: 75-42
17.3.56 Code: 75-43
17.3.57 Misfeed at duplex pre-registration section
17.3.58 Misfeed at duplex transport section
18. MALFUNCTION CODE
18.1 Display procedure
18.2 List
18.3 Solution
18.3.1 S-1: CCD gain adjustment failure
18.3.2 D-1: Split line detect
18.3.3 D-2: ADF read guide trouble
18.3.4 P-5: IDC sensor failure
18.3.5 P-9: Drum/Development unit (K) failure
18.3.6 P-16: PC charge cleaning trouble 1
18.3.7 P-18: PC charge cleaning trouble 2
18.3.8 P-27: Secondary transfer ATVC failure
18.3.9 P-32: Heating roller temperature sensor /1 temperature detection failure 702
19. TROUBLE CODE
19.1 Display procedure
19.2 Trouble resetting procedure
19.2.1 Trouble resetting procedure by Trouble Reset key
19.3 Trouble isolation function
19.4 List
19.5 Solution
19.5.1 C0104: Tray 3/4 feeder transportation motor failure to turn
19.5.2 C0105: Tray 3/4 feeder transportation motor turning at abnormal timing
19.5.3 C0202: Tray 1 feeder up/down abnormality
19.5.4 C0204: Tray 2 feeder up/down abnormality
19.5.5 C0206: Tray 3 feeder up/down abnormality
19.5.6 C0208: Tray 4 feeder up/down abnormality
19.5.7 C0216: LCT up/down abnormality
19.5.8 C0301: Suction fan motor’s failure to turn
19.5.9 C0351: Paper cooling fan trouble
19.5.10 C1003: PK communication error
19.5.11 C1004: FNS communication error
19.5.12 C1005: ZU communication error
19.5.13 C1081: SD communication error
19.5.14 C1102: Main tray Up/Down motor malfunction
19.5.15 C1103: Side-staple front adjust drive motor malfunction
19.5.16 C1104: Paper exit roller drive motor malfunction
19.5.17 C1105: Paper exit auxiliary roller motor malfunction
19.5.18 C1106: Side-staple stapler drive malfunction
19.5.19 C1109: Side-staple stapler motor drive malfunction
19.5.20 C1110: Center-staple head roller motor malfunction
19.5.21 C1112: Center-staple clinch roller motor malfunction
19.5.22 C1113: Center-staple lead edge stopper motor malfunction
19.5.23 C1114: Center-staple front adjust drive motor malfunction
19.5.24 C1115: Center-staple knife drive motor malfunction
19.5.25 C1116: Center-staple transfer motor malfunction
19.5.26 C1124: Sheet feeder up/down drive failure (lower)
19.5.27 C1125: Sheet feeder up/down drive failure (upper)
19.5.28 C1127: Punch shift motor drive malfunction
19.5.29 C1130: 1st stopper motor drive malfunction
19.5.30 C1131: 2nd folding stopper motor drive malfunction
19.5.31 C1132: Output OP punch driving motor malfunction
19.5.32 C1133: Punch shift motor drive malfunction
19.5.33 C1134: Main motor cooling fan drive malfunction
19.5.34 C1135: Punch motor drive malfunction
19.5.35 C1136: Punch switchover motor drive malfunction
19.5.36 C1140: Side-staple rear adjust drive motor malfunction
19.5.37 C1141: Side-staple paddle roller motor malfunction
19.5.38 C1142: Side-staple trailing paddle up-down motor malfunction
19.5.39 C1143: Side-staple rewinding paddle up-down motor malfunction
19.5.40 C1144: Spare stacker board drive motor malfunction
19.5.41 C1145: End stopper drive motor malfunction
19.5.42 C1150: Center-staple rear adjust drive motor malfunction
19.5.43 C1151: Center-staple stapler drive motor malfunction
19.5.44 C1152: Center-staple paper exit motor malfunction
19.5.45 C1153: Center-staple paddle up-down motor malfunction (trailing edge). 761
19.5.46 C1156: Center-staple paddle roller motor malfunction (trailing edge)
19.5.47 C1157: Center-staple paddle roller motor malfunction (middle)
19.5.48 C1158: Center-staple paddle roller motor malfunction (leading edge)
19.5.49 C1182: Shift motor drive malfunction
19.5.50 C1183: Elevate drive malfunction
19.5.51 C1190: Alignment plate motor drive malfunction
19.5.52 C1194: Leading edge stopper motor drive malfunction
19.5.53 C11A1: Tray 2 exit roller pressure/ retraction malfunction
19.5.54 C11A2: Accommodation roller pressure/ retraction malfunction
19.5.55 C11A7: Tray 3 exit roller pressure/ retraction malfunction
19.5.56 C11B0: Stapler movement drive malfunction
19.5.57 C11B2: Staple drive malfunction
19.5.58 C11B5: Saddle stapler drive malfunction
19.5.59 C11C0: Punch motor drive malfunction
19.5.60 C11E0: Duplex path switching motor drive malfunction / Finisher route change malfunction
19.5.61 C11E1: Upper lower path switching motor drive malfunction
19.5.62 C11E2: Tray1 path switching motor drive malfunction
19.5.63 C2101: PC charge cleaning malfunction
19.5.64 C2151: Secondary transfer roller pressure welding alienation
19.5.65 C2152: Transfer belt pressure welding alienation
19.5.66 C2163: PC charge (K) malfunction
19.5.67 C2204: Waste toner agitating motor’s failure to turn
19.5.68 C2257: Cleaner motor’s failure to turn
19.5.69 C2258: Cleaner motor’s turning at abnormal timing
19.5.70 C2259: K developing motor’s failure to turn
19.5.71 C225A: K developing motor’s turning at abnormal timing
19.5.72 C225B: K PC drum motor’s failure to turn
19.5.73 C225C: K PC drum motor’s turning at abnormal timing
19.5.74 C2350: Toner suction fan motor’s failure to turn
19.5.75 C2353: IU cooling fan motor’s failure to turn
19.5.76 C2354: Rear side cooling fan motor’s failure to turn
19.5.77 C2557: Abnormally low toner density detected black TCR sensor
19.5.78 C2558: Abnormally high toner density detected black TCR sensor
19.5.79 C255C: Black TCR sensor adjustment failure
19.5.80 C2564: Black TCR sensor failure
19.5.81 C2650: Main backup media access error
19.5.82 C2654: EEPROM access error (Developing unit)
19.5.83 C2A14: Drum unit new release failure
19.5.84 C2A24: Toner cartridge new release failure
19.5.85 C3101: Fusing roller separation failure
19.5.86 C3102: Fusing roller failure to turn
19.5.87 C3201: Fusing motor failure to turn
19.5.88 C3202: Fusing motor turning at abnormal timing
19.5.89 C3303: Fusing cooling fan motor/ 1 failure to turn
19.5.90 C3305: Fusing cooling fan motor/ 3 failure to turn
19.5.91 C3424: Fusing heaters trouble (soaking side)
19.5.92 C3425: Fusing heaters trouble (NC sensor)
19.5.93 C3721: Fusing abnormally high temperature detection (Center of the heating roller)
19.5.94 C3722: Fusing abnormally high temperature detection (Edge of the heating roller)
19.5.95 C3725: Fusing abnormally high temperature detection (NC sensor)
19.5.96 C3724: Fusing abnormally high temperature detection (soaking side)
19.5.97 C3822: Fusing abnormally low temperature detection (Edge of the heating roller)
19.5.98 C3825: Fusing abnormally low temperature detection (NC sensor)
19.5.99 C3824: Fusing abnormally low temperature detection (soaking side)
19.5.100 C3921: Fusing sensor wire breaks detection (Center of the heating roller)
19.5.101 C3922: Fusing sensor wire breaks detection (Edge of the heating roller)
19.5.102 C3925: Fusing sensor wire breaks detection (NC sensor)
19.5.103 C3924: Fusing sensor wire breaks detection (soaking side)
19.5.104 C392A: Fusing sensor contamination (NC sensor)
19.5.105 C3B02: IH malfunction (CPU)
19.5.106 C3B03: IH malfunction (monitor)
19.5.107 C3B05: IH temperature sensor defect
19.5.108 C3B06: IH surge error
19.5.109 C3B07: IH input power error
19.5.110 C3B08: IH input voltage error
19.5.111 C4101: Polygon motor rotation trouble
19.5.112 C4301: PH cooling fan motor failure to turn
19.5.113 C4501: Laser malfunction
19.5.114 C5104: Transfer belt motor’s failure to turn
19.5.115 C5105: Transfer belt motor’s turning at abnormal timing
19.5.116 C5304: IH cooling fan motor/1’s failure to turn
19.5.117 C5306: IH cooling fan motor/2’s failure to turn
19.5.118 C5351: Power supply cooling fan motor/1’s failure to turn
19.5.119 C5354: Ozone ventilation fan motor’s failure to turn
19.5.120 C5356: Cooling fan motor’s failure to turn
19.5.121 C5370: MFP control board cooling fan motor’s failure to turn
19.5.122 C5372: MFP control board CPU temperature failure
19.5.123 C6001: ADF related configuration error 1
19.5.124 C6002: ADF related configuration error 2
19.5.125 C6102: Drive system home sensor malfunction
19.5.126 C6103: Slider over running
19.5.127 C6301: Optical cooling fan motor’s failure to turn
19.5.128 C6704: Image input time out
19.5.129 C6751: CCD clamp/gain adjustment failure
19.5.130 C6752: ASIC clock input error
19.5.131 C6901: DSC board mount failure 1
19.5.132 C6902: DSC board bus check NG1-1
19.5.133 C6903: DSC board bus check NG1-2
19.5.134 C6F01: Scanner sequence trouble 1
19.5.135 C8101: Before reading pressure welding alienation mechanism
19.5.136 C8102: Turn around pressure welding alienation trouble
19.5.137 C8103: Lift up mechanism trouble (Upward movement)
19.5.138 C8104: Glass movement trouble
19.5.139 C8106: Lift up mechanism failure (Downward movement)
19.5.140 C8302: Cooling fan failure
19.5.141 C8401: EEPROM failure
19.5.142 C9401: Exposure turning on the lamp trouble detection
19.5.143 C9402: Exposure turning on the lamp abnormally detection
19.5.144 CA051: Standard controller configuration failure
19.5.145 CA052: Controller hardware error
19.5.146 CA053: Controller start failure
19.5.147 CC001: Vendor connection failure
19.5.148 CC151: ROM contents error upon startup (MSC)
19.5.149 CC152: ROM contents error upon startup (Scanner)
19.5.150 CC153: ROM contents error upon startup (PRT)
19.5.151 CC155: Finisher ROM error
19.5.152 CC156: ADF ROM error
19.5.153 CC157: Finisher ROM error (RU)
19.5.154 CC158: Finisher ROM error (ZU)
19.5.155 CC159: ROM contents error upon startup (DSC1)
19.5.156 CC15A: ROM contents error upon startup (DSC2)
19.5.157 CC15B: Finisher ROM error (SD)
19.5.158 CC163: ROM contents error (PRT)
19.5.159 CC164: ROM contents error (MSC)
19.5.160 CC165: ROM contents error (ADF)
19.5.161 CC170: Dynamic link error during starting (AP0)
19.5.162 CC171: Dynamic link error during starting (AP1)
19.5.163 CC172: Dynamic link error during starting (AP2)
19.5.164 CC173: Dynamic link error during starting (AP3)
19.5.165 CC174: Dynamic link error during starting (AP4)
19.5.166 CC180: Dynamic link error during starting (LDR)
19.5.167 CC181: Dynamic link error during starting (IBR)
19.5.168 CC182: Dynamic link error during starting (IID)
19.5.169 CC183: Dynamic link error during starting (IPF)
19.5.170 CC184: Dynamic link error during starting (IMY)
19.5.171 CC185: Dynamic link error during starting (SPF)
19.5.172 CC186: Dynamic link error during starting (OAP)
19.5.173 CC190: Outline font load error
19.5.174 CC191: Setting parameter load error
19.5.175 CD002: JOB RAM save error
19.5.176 CD004: Hard disk access error (connection failure)
19.5.177 CD00F: Hard disk data transfer error
19.5.178 CD020: Hard disk verify error
19.5.179 CD010: Hard disk unformat
19.5.180 CD011: Hard disk out of specifications mounted
19.5.181 CD041 to CD046: HDD command execution error Address Mark Not Found
19.5.182 CD047 to CD04B: HDD SCSI library error
19.5.183 CD201: File memory mounting error
19.5.184 CD202: Memory capacity discrepancy
19.5.185 CD203: Memory capacity discrepancy 2
19.5.186 CD211: PCI-SDRAM DMA operation failure
19.5.187 CD212: Compression/extraction timeout detection
19.5.188 CD231: No Fax memory at FAX board mounting
19.5.189 CD241: Encryption ASIC setting error
19.5.190 CD242: EncryptionASIC mounting error
19.5.191 CD261: USB host board failure
19.5.192 CD271: i-Option activated and additional memory not installed
19.5.193 CD272: i-Option activated and additional memory and HDD not installed 812
19.5.194 CD401: NACK command incorrect
19.5.195 CD402: ACK command incorrect
19.5.196 CD403: Checksum error
19.5.197 CD404: Receiving packet incorrect
19.5.198 CD405: Receiving packet analysis error
19.5.199 CD406: ACK receiving timeout
19.5.200 CD407: Retransmission timeout
19.5.201 CE001: Abnormal message queue
19.5.202 CE003: Task error
19.5.203 CE004: Event error
19.5.204 CE005: Memory access error
19.5.205 CE006: Header access error
19.5.206 CE007: DIMM initialize error
19.5.207 CD3##: NVRAM data error
19.5.208 CE002: Message and method parameter failure
19.5.209 CEEE1: MFP board malfunction
19.5.210 CEEE2: Scanner section malfunction
19.5.211 CEEE3: Printer control board malfunction
19.5.212 CFB00 to CFFA0: Abort code
20. NETWORK ERROR CODE
20.1 Display procedure
20.2 List
21. OPEN API RELATED TROUBLE
21.1 Outline
21.2 Types of Trouble
21.3 Solution
22. POWER SUPPLY TROUBLE
22.1 Machine is not energized at all (DCPU operation check)
22.2 Fusing heaters do not operate
22.3 Power is not supplied to ADF
22.4 Power is not supplied to option
22.4.1 LU-204/301
22.4.2 FS-526/527
23. IMAGE QUALITY PROBLEM
23.1 How to read element data
23.1.1 Table number
23.1.2 Level history 1
23.1.3 Level history 2
23.2 How to identify problematic part
23.2.1 Initial check items
23.2.2 Initial check items 3
23.3 Solution
23.3.1 Scanner system: white lines, white bands, colored lines and colored bands in sub scan direction
23.3.2 Scanner system: white lines, white bands, colored lines and colored bands in main scan direction
23.3.3 Scanner system: color spots
23.3.4 Scanner system: fog
23.3.5 Scanner system: blurred image, blotchy image
23.3.6 Scanner system: incorrect color image registration, sync shift (lines in main scan direction)
23.3.7 Scanner system: moire
23.3.8 Scanner system: skewed image
23.3.9 Scanner system: distorted image
23.3.10 Scanner system: low image density, rough image
23.3.11 Scanner system: defective ACS
23.3.12 Scanner system: blank copy, black copy
23.3.13 Scanner system: abnormal image
23.3.14 Scanner system: uneven density
23.3.15 Printer system: Blank copy or black copy
23.3.16 Printer system: Low image density or rough image
23.3.17 Printer system: Foggy background
23.3.18 Printer system: Black streaks or bands in sub scan direction
23.3.19 Printer system: Black streaks or bands in main scan direction
23.3.20 Printer system: Black spots
23.3.21 Printer system: White streaks or bands in sub scan direction
23.3.22 Printer system: White streaks or bands in main scan direction
23.3.23 Printer system: Void areas
23.3.24 Printer system: Smears on back of paper
23.3.25 Printer system: Uneven image density
23.3.26 Printer system: Gradation reproduction failure
23.3.27 Printer system: Uneven pitch
24. IC protector
24.1 Outline
24.2 IC protector list
24.2.1 Main body
24.2.2 DF-618
24.2.3 LU-301/LU-204
24.2.4 ZU-606
24.2.5 FS-526
24.2.6 SD-508
24.2.7 PK-516
24.2.8 PI-505
24.2.9 FS-527
24.2.10 SD-509
25. TROUBLESHOOTING OF i-Option
25.1 Outline
25.1.1 Structure of license management
25.1.2 License management information
25.2 Error message
25.2.1 License management error

APPENDIX
26. PARTS LAYOUT DRAWING
26.1 Main body
26.1.1 Scanner section
26.1.2 Front side
26.1.3 Back side
26.1.4 Around the write section
26.1.5 Manual bypass tray
26.1.6 Tray 1
26.1.7 Tray 2
26.1.8 Tray 3
26.1.9 Tray 4
26.1.10 2nd transfer section
26.1.11 Duplex section
26.1.12 Fusing/paper exit section
26.2 DF-618/SP-501
26.3 LU-301 (Option)
26.4 LU-204 (Option)
26.5 ZU-606 (Option)
26.6 OT-503 (Option)
26.7 FS-526 (Option)
26.8 SD-508 (Option)
26.9 PK-516 (Option)
26.10 JS-602 (Option)
26.11 PI-505 (Option)
26.12 FS-527 (Option)
26.13 PK-517 (Option)
26.14 SD-509 (Option)
26.15 JS-603 (Option)
27. CONNECTOR LAYOUT DRAWING
27.1 Main body
27.1.1 Printer control board (PRCB)
27.1.2 MFP board (MFPB)
27.1.3 PCI board (PCIB)
27.1.4 Paper feed/transport drive board (PFTDB)
27.1.5 PH relay board (REYB/PH)
27.1.6 Scanner relay board (REYB/SCAN)
27.1.7 Original glass position control board (OGPCB)
27.1.8 DF control board (DFCB)
27.1.9 LU drive board (LUDB)
27.1.10 Punch control board (PKDB)
27.1.11 ZU control board
27.1.12 FS control board (FSCB)
27.1.13 Interlock board (IRB)
27.1.14 SD drive board (SDDB)
27.1.15 PI drive board
28. RELAY CONNECTOR LAYOUT DRAWING
28.1 How to read the relay connector layout drawing
28.2 Main body
29. TIMING CHART
29.1 Main body
29.2 DF-618
29.2.1 1-sided mode
29.2.2 2-sided mode
29.3 LU-204
29.4 FS-526/SD-508
29.4.1 Straight paper exit mode
29.4.2 2 flat stitching staples mode
29.4.3 Saddle stitching mode
29.4.4 Tri-folding mode
29.5 ZU-606
29.5.1 Z-folding+Punch mode
29.6 FS-527/SD-509/PK-517
29.6.1 Shift mode
29.6.2 2 flat stitching staples mode
29.6.3 Center staples mode
29.6.4 Punch mode
29.7 JS-603
29.7.1 Tray3 paper exit mode

Number of pages: 1453.