Konica Minolta Bizhub 658e/558e/458e/368e/308e Service Manual and Parts List Manual

Service Manual and Parts List Manual Konica Minolta Bizhub 658e/558e/458e/368e/308e;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Konica Minolta Bizhub copier.
You can print, zoom or read any diagram, picture or page from this Service Manual and Parts List Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Konica Minolta Bizhub 658e/558e/458e/368e/308e photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

A) SAFETY AND IMPORTANT WARNING ITEMS
1. IMPORTANT NOTICE
2. DESCRIPTION ITEMS FOR DANGER, WARNING AND CAUTION
2.1 Description items in this Service Manual
2.2 Description items for safety and important warning items
3. SAFETY WARNINGS
3.1 MODIFICATIONS NOT AUTHORIZED BY KONICA MINOLTA, INC
3.1.1 Actions requiring special attention
3.2 POWER PLUG SELECTION
3.2.1 Power Cord Set or Power Plug
3.3 CHECKPOINTS WHEN PERFORMING ON-SITE SERVICE
3.3.1 Power Supply
3.3.2 Installation Requirements
3.3.3 After Service
3.4 FUSE
3.5 Used Batteries Precautions
3.5.1 ALL Areas
3.5.2 Germany
3.5.3 France
3.5.4 Denmark
3.5.5 Finland, Sweden
3.5.6 Norway
3.6 Laser Safety
3.6.1 Laser Safety
3.6.2 Internal Laser Radiation
3.6.3 Laser Safety Label
3.6.4 Laser Caution Label
3.6.5 PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT
4. WARNING INDICATIONS ON THE MACHINE
4.1 Warning indications inside the machine
4.2 Warning indications on the boards
5. MEASURES TO TAKE IN CASE OF AN ACCIDENT

B) NOTATION OF THE CONTENTS
1. PRECAUTION ON HANDLING THIS MANUAL
2. PRODUCT NAME
3. BRAND NAME
3.1 TRADEMARKS OF OTHER COMPANIES
3.2 OWN TRADEMARKS
4. FEEDING DIRECTION

C) PRODUCT OUTLINE
1. PRODUCT SPECIFICATIONS
1.1 bizhub 658e/558e/458e/368e/308e
1.1.1 Type
1.1.2 Function
1.1.3 Paper
1.1.4 Material
1.1.5 Print volume
1.1.6 Machine specification
1.1.7 Operating environment
1.1.8 Print functions
1.1.9 Scan functions
1.1.10 Note for the Specifications
1.2 Dual scan document feeder
1.2.1 Type
1.2.2 Function
1.2.3 Type of document
1.2.4 Particular original
1.2.5 Prohibited original
1.2.6 Mixed original feed chart
1.2.7 Machine specification
1.2.8 Operating environment
1.2.9 Note for the Specifications
1.3 DF-629
1.3.1 Type
1.3.2 Function
1.3.3 Type of document
1.3.4 Particular original
1.3.5 Prohibited original
1.3.6 Mixed original feed chart
1.3.7 Machine specification
1.3.8 Operating environment
1.3.9 Note for the Specifications
1.4 DF-704
1.4.1 Type
1.4.2 Function
1.4.3 Type of document
1.4.4 Particular original
1.4.5 Prohibited original
1.4.6 Mixed original feed chart
1.4.7 Machine specification
1.4.8 Operating environment
1.4.9 Note for the Specifications
1.5 PC-115/PC-215
1.5.1 Type
1.5.2 Paper
1.5.3 Machine specification
1.5.4 Operating environment
1.5.5 Note for the Specifications
1.6 PC-415
1.6.1 Type
1.6.2 Paper
1.6.3 Machine specification
1.6.4 Operating environment
1.6.5 Note for the Specifications
1.7 LU-207
1.7.1 Type
1.7.2 Paper
1.7.3 Machine specification
1.7.4 Operating environment
1.7.5 Note for the Specifications
1.8 LU-302
1.8.1 Type
1.8.2 Paper
1.8.3 Machine specification
1.8.4 Operating environment
1.8.5 Note for the Specifications
1.9 JS-506
1.9.1 Type
1.9.2 Function
1.9.3 Capacity
1.9.4 Offset function
1.9.5 Machine specification
1.9.6 Operating environment
1.9.7 Note for the Specifications
1.10 FS-533
1.10.1 Type
1.10.2 Function
1.10.3 Paper process ability
1.10.4 Machine specification
1.10.5 Operating environment
1.10.6 Note for the Specifications
1.11 PK-519
1.11.1 Type
1.11.2 Function
1.11.3 Paper
1.11.4 Machine specification
1.11.5 Operating environment
1.11.6 Note for the Specifications
1.12 FS-536/FS-536SD
1.12.1 Type
1.12.2 Function
1.12.3 Paper process ability
1.12.4 Machine specification
1.12.5 Operating environment
1.12.6 Note for the Specifications
1.13 PK-520
1.13.1 Type
1.13.2 Functions
1.13.3 Paper
1.13.4 Machine specification
1.13.5 Operating environment
1.13.6 Note for the Specifications
1.14 FS-537/FS-537SD
1.14.1 Type
1.14.2 Function
1.14.3 Staple
1.14.4 Capacity
1.14.5 Center Fold
1.14.6 Tri-folding
1.14.7 Machine specification
1.14.8 Operating environment
1.14.9 Note for the Specifications
1.15 PK-523
1.15.1 Type
1.15.2 Function
1.15.3 Paper
1.15.4 Machine specification
1.15.5 Operating environment
1.15.6 Note for the Specifications
1.16 ZU-609
1.16.1 Type
1.16.2 Function
1.16.3 Paper process ability
1.16.4 Machine specification
1.16.5 Operating environment
1.16.6 Note for the Specifications
1.17 JS-602
1.17.1 Type
1.17.2 Function
1.17.3 Paper
1.17.4 Machine specification
1.17.5 Operating environment
1.17.6 Note for the Specifications
1.18 PI-507
1.18.1 Type
1.18.2 Function
1.18.3 Paper
1.18.4 Machine specification
1.18.5 Operating environment
1.18.6 Note for the Specifications
1.19 CU-101
1.19.1 Type
1.19.2 Machine specification
1.19.3 Operating environment
1.19.4 Note for the Specifications
1.20 CU-102
1.20.1 Type
1.20.2 Machine specification
1.20.3 Operating environment
1.20.4 Note for the Specifications
1.21 FK-514/FK-515
1.21.1 Basic specifications
1.21.2 Functional specifications
1.21.3 Network fax specifications
1.22 i-Option LK-102 v3/104 v3/105 v4/106/107/108/110 v2/111/114/115 v2
1.22.1 Available function for i-Option
1.22.2 Web browser function
2. OVERALL COMPOSITION
2.1 bizhub 368e/308e
2.1.1 System configuration
2.1.2 SECTION CONFIGURATION
2.1.3 Paper path
2.1.4 CONTROL BLOCK DIAGRAM
2.1.5 IMAGE CREATION PROCESS
2.1.6 IMAGE FORMING CONTROL
2.1.7 PROCESS SPEED
2.2 bizhub 658e/558e/458e
2.2.1 System configuration
2.2.2 SECTION CONFIGURATION
2.2.3 Paper path
2.2.4 CONTROL BLOCK DIAGRAM
2.2.5 IMAGE CREATION PROCESS
2.2.6 IMAGE FORMING CONTROL
2.2.7 PROCESS SPEED

D) SERVICE TOOL
1. bizhub 658e/558e/458e/368e/308e
1.1 Service material list
1.2 CE tool list
1.3 Utility tool
1.3.1 IC card information setting tool of AU-201/AU-201S/AU-202H/OMNIKEY 5427CK (AU-205H)/SCL-010/YSoft card reader
2. Dual Scan Document Feeder
2.1 CE tool list
3. DF-628
3.1 CE tool list

E) MAINTENANCE
1. Concept of maintenance
1.1 Concept of periodical maintenance
1.2 Concept of consumable/part replacement time
1.3 Specified condition for replacement time on field standard yield
1.3.1 Japan
1.3.2 North America
1.3.3 Europe
2. Periodical replacement parts list
2.1 bizhub 658e/558e/458e/368e/308e
2.2 Dual scan document feeder (DF-703)
2.3 DF-629
2.4 DF-704
2.5 PC-115
2.6 PC-215
2.7 PC-415
2.8 LU-207
2.9 LU-302
2.10 FS-533
2.11 FS-536
2.12 FS-536SD
2.13 FS-537
2.14 FS-537SD
2.15 PI-507
3. Cleaning parts list
3.1 bizhub 658e/558e/458e/368e/308e
3.2 Dual scan document feeder (DF-703)
3.3 DF-629
3.4 DF-704
3.5 PC-115/PC-215
3.6 PC-415
3.7 LU-207
3.8 LU-302
3.9 FS-533
3.10 FS-536
3.11 FS-536SD
3.12 FS-537
3.13 FS-537SD
3.14 ZU-609
3.15 JS-602
3.16 PI-507
4. Periodical replacement procedure
4.1 bizhub 658e/558e/458e/368e/308e
4.1.1 Replacing the toner filter (bizhub 658e/558e/458e)
4.1.2 Replacing the drum unit
4.1.3 Replacing the developing unit
4.1.4 Replacing the toner cartridge
4.1.5 Replacing the transfer belt unit
4.1.6 Replacing the transfer roller unit
4.1.7 Replacing the waste toner box
4.1.8 Replacing the tray 1 feed roller, tray 1 pick-up roller, tray 1 separation roller
4.1.9 Replacing the tray 2 feed roller, tray 2 pick-up roller, tray 2 separation roller
4.1.10 Replacing the manual bypass tray feed roller, manual bypass tray separation roller assy
4.1.11 Replacing the fusing unit (bizhub 458e/368e/308e)
4.1.12 Replacing the fusing unit (bizhub 658e/558e)
4.2 Dual scan document feeder (DF-703)
4.2.1 Replacing the pick-up roller/feed roller
4.2.2 Replacing the separation roller
4.3 DF-629
4.3.1 Replacing the paper feed assy
4.3.2 Replacing the pick-up roller/feed roller
4.3.3 Replacing the separation roller assy
4.4 DF-704
4.4.1 Replacing the paper feed assy
4.4.2 Replacing the pick-up roller/feed roller
4.4.3 Replacing the separation roller assy
4.5 PC-115/PC-215
4.5.1 Replacing the tray 3 feed roller, tray 3 pick-up roller, tray 3 separation roller
4.5.2 Replacing the tray 4 feed roller, tray 4 pick-up roller, tray 4 separation roller
4.6 PC-415
4.6.1 Replacing the feed roller, pick-up roller, separation roller
4.7 LU-207
4.7.1 Replacing the pick-up roller
4.7.2 Replacing the feed roller
4.7.3 Replacing the separation roller
4.8 LU-302
4.8.1 Replacing the pick-up roller
4.8.2 Replacing the feed roller
4.8.3 Replacing the separation roller
4.9 FS-533
4.9.1 Replacing the alignment roller assy F/R
4.10 FS-536/FS-536SD
4.10.1 Replacing the paddle (FS-536/FS-536SD)
4.10.2 Replacing the upper paddle (FS-536SD)
4.10.3 Replacing the lower paddle (FS-536SD)
4.11 FS-537/FS-537SD
4.11.1 Replacing the paddle (FS-537SD/FS-537)
4.11.2 Replacing the upper paddle (FS-537SD)
4.11.3 Replacing the lower paddle (FS-537SD)
4.12 PI-507
4.12.1 Replacing the pick-up roller/Lw / feed roller/Lw (PI-507)
4.12.2 Replacing separation roller/Lw / torque limiter/Lw (PI-507)
5. Cleaning/Lubrication procedure
5.1 bizhub 658e/558e/458e/368e/308e
5.1.1 Cleaning of the image transfer entrance guide
5.1.2 Cleaning of the IDC sensor window
5.1.3 Cleaning of the area around the waste toner collecting port
5.1.4 Cleaning of the registration roller
5.1.5 Cleaning of the IH coil (bizhub 658e/558e)
5.1.6 Cleaning of the duplex transport rollers
5.1.7 Transfer belt unit
5.1.8 PH window
5.1.9 Tray 1 feed roller, tray 1 pick-up roller, tray 1 separation roller
5.1.10 Tray 2 feed roller, tray 2 pick-up roller, tray 2 separation roller
5.1.11 Tray 2 transport roller
5.1.12 Manual bypass tray feed roller
5.1.13 Manual bypass tray separation roller
5.1.14 Original glass
5.1.15 Scanner rails
5.1.16 Mirrors
5.1.17 Lens
5.1.18 CCD sensor
5.2 Dual scan document feeder (DF-703)
5.2.1 Cleaning of the pick-up roller/feed roller
5.2.2 Cleaning of the separation roller
5.2.3 Cleaning the torque limiter
5.2.4 Cleaning of the miscellaneous rolls
5.2.5 Cleaning of the miscellaneous rollers
5.2.6 Cleaning of the front side scanning guide
5.2.7 Cleaning of the reflective sensor section
5.2.8 Back side scanning glass
5.2.9 Back side scanning guide/Back side scanning shading shaft
5.3 DF-629
5.3.1 Cleaning of the pick-up roller/feed roller
5.3.2 Cleaning of the separation roller
5.3.3 Cleaning of the miscellaneous rolls
5.3.4 Cleaning of the miscellaneous rollers
5.3.5 Cleaning of the scanning guide
5.3.6 Cleaning of the reflective sensor section
5.4 DF-704
5.4.1 Cleaning of the pick-up roller/feed roller
5.4.2 Cleaning of the separation roller
5.4.3 Cleaning of the miscellaneous rolls
5.4.4 Cleaning of the miscellaneous rollers
5.4.5 Cleaning of the front side scanning guide
5.4.6 Cleaning of the reflective sensor section
5.4.7 Back side scanning glass
5.4.8 Back side scanning guide/Back side scanning shading shaft
5.5 PC-115/PC-215
5.5.1 Tray 3 feed roller, tray 3 pick-up roller, tray 3 separation roller
5.5.2 Tray 4 feed roller, tray 4 pick-up roller, tray 4 separation roller
5.5.3 Tray 3 vertical transport roller, tray 4 vertical transport roller
5.6 PC-415
5.6.1 Feed roller, Pick-up roller, Separation roller
5.6.2 Vertical transport roller
5.7 LU-207
5.7.1 Pick-up roller
5.7.2 Feed roller
5.7.3 Separation roller
5.7.4 Conveyance roller
5.8 LU-302
5.8.1 Pick-up roller
5.8.2 Feed roller
5.8.3 Separation roller
5.8.4 Conveyance roller
5.9 FS-533
5.9.1 Cleaning procedure for each parts
5.9.2 Cleaning the paper exit paddle
5.10 FS-536/FS-536SD
5.10.1 Cleaning procedure for each rollers/each rolls (FS-536/FS-536SD)
5.10.2 Cleaning the paddle (FS-536/FS-536SD)
5.10.3 Cleaning the upper paddle (FS-536SD)
5.10.4 Cleaning the lower paddle (FS-536SD)
5.10.5 FNS entrance sensor (PS4) (FS-536SD/FS-536)
5.10.6 Main tray exit sensor (PS16) (FS-536SD/FS-536)
5.11 FS-537/FS-537SD
5.11.1 Cleaning procedure for each rollers/each rolls (FS-537SD/FS-537)
5.11.2 Cleaning the paddles (FS-537SD/FS-537)
5.11.3 Cleaning the exit tray conveyance belt (FS-537SD)
5.11.4 Cleaning the upper paddle (FS-537SD)
5.11.5 Cleaning the lower paddle (FS-537SD)
5.11.6 FNS entrance sensor (PS34) (FS-537SD/FS-537)
5.11.7 FNS middle sensor (PS36) (FS-537SD/FS-537)
5.11.8 Main tray exit sensor (PS37) (FS-537SD/FS-537)
5.12 ZU-609
5.12.1 Cleaning of the Z fold roller (ZU-609)
5.13 JS-602
5.13.1 Cleaning conveyance roller/paper exit roller (JS-602)
5.14 PI-507
5.14.1 Pick-up roller/Lw, feed roller/Lw, separation roller/Lw
5.14.2 Conveyance roller/Lw

F) DISASSEMBLY/REASSEMBLY
1. Disassembly/adjustment prohibited items
1.1 Paint-locked screws
1.2 Red-painted screws
1.3 Variable resistors on board
1.4 Warnings for disassembly
1.5 Warnings / Precautions during setup or transportation
2. Units from which removing is prohibited
2.1 CCD board
2.1.1 Reason for prohibition
2.2 PH unit
2.2.1 Reason for prohibition
2.3 Fusing unit
2.3.1 Reason for prohibition
3. Disassembly/assembly warning/caution items
3.1 Removal/installing of PWBs
4. Notes when transporting the machine
4.1 Protective materials
4.1.1 Protective materials for the photoconductors
4.1.2 Scanner packing bracket
5. bizhub 368e/308e
5.1 Exterior parts
5.1.1 Scanner rear cover
5.1.2 Scanner right cover
5.1.3 Scanner front cover
5.1.4 Scanner left cover
5.1.5 Scanner upper rear cover
5.1.6 Control panel left cover/1
5.1.7 Control panel left cover/2
5.1.8 Control panel right cover
5.1.9 Control panel upper cover
5.1.10 Control panel front cover
5.1.11 Control panel unit
5.1.12 Original glass
5.1.13 Front door
5.1.14 Front lower cover
5.1.15 Front cover
5.1.16 Left cover
5.1.17 Exit tray
5.1.18 Rear right cover
5.1.19 Upper right cover
5.1.20 Lower rear cover
5.1.21 Upper rear cover
5.1.22 Protective sheet
5.1.23 Tray 1
5.1.24 Tray 2
5.2 Units
5.2.1 LED exposure unit
5.2.2 Paper feed unit
5.2.3 PH unit
5.2.4 Sub hopper unit
5.2.5 Right door unit
5.2.6 Manual bypass tray unit
5.2.7 Regist unit
5.2.8 Hard disk (A)
5.2.9 How to open the PWB box
5.2.10 Main drive unit
5.2.11 Transport unit
5.2.12 Fusing drive unit
5.2.13 Hopper drive unit
5.3 Boards
5.3.1 CCD board (CCDB)
5.3.2 Scanner drive board (SCDB)
5.3.3 Machine condition monitor board (MCMB)
5.3.4 Front side board (FRB)
5.3.5 PH relay board (PHRYB)
5.3.6 DC power supply (DCPU)
5.3.7 EEPROM 1, EEPROM 2
5.3.8 eMMC board (eMMCB)
5.3.9 MFP board (MFPB)
5.3.10 High voltage unit (HV)
5.3.11 Tray 1 FD paper size board (FDPSB/1), tray 2 FD paper size board (FDPSB/2)
5.3.12 Tray 1 CD paper size board (CDPSB/1), tray 2 CD paper size board (CDPSB/2)
5.3.13 Tray 1 empty indicator board (PEIB/1), tray 2 empty indicator board (PEIB/2)
5.4 Motors
5.4.1 Transport motor (M1)
5.4.2 Fusing motor (M3)
5.4.3 Reverse motor (M4)
5.4.4 ADU transport motor1 (M5)
5.4.5 Toner supply motor/K (M6)
5.4.6 Fusing pressure motor (M11)
5.4.7 Tray 1 lift-up motor (M12)
5.4.8 Tray 2 lift-up motor (M13)
5.4.9 Paper feed motor (M22)
5.4.10 Tray 2 vertical transport motor (M23)
5.4.11 Toner cartridge motor/K (M25)
5.4.12 Scanner motor (M201)
5.5 Clutches
5.5.1 Tray 2 paper feed clutch (CL1)
5.5.2 Registration clutch (CL4)
5.5.3 ADU transport clutch (CL6)
5.5.4 Bypass paper feed clutch (CL7)
5.5.5 Paper exit clutch (CL8)
5.6 Fans
5.6.1 Power supply cooling fan (FM1)
5.6.2 Transfer belt cleaner cooling fan (FM2)
5.6.3 Machine rear side cooling fan (FM3)
5.6.4 Paper cooling fan (FM8)
5.7 Others
5.7.1 Bypass pick-up solenoid (SD1)
5.7.2 IDC sensor shutter solenoid (SD2)
5.7.3 Gate switch solenoid (SD3)
5.7.4 Developing solenoid (SD4)
5.7.5 FAX speaker (SP1)
5.7.6 Bypass CD paper size VR (VR1)
5.7.7 UFP filter/ Deodorant filter
6. bizhub 658e/558e/458e
6.1 Exterior parts
6.1.1 Scanner rear cover
6.1.2 Scanner right cover
6.1.3 Scanner front cover
6.1.4 Scanner left cover
6.1.5 Scanner upper rear cover
6.1.6 Control panel left cover/1
6.1.7 Control panel left cover/2
6.1.8 Control panel right cover
6.1.9 Control panel upper cover
6.1.10 Control panel front cover
6.1.11 Control panel unit
6.1.12 Original glass
6.1.13 Upper front door
6.1.14 Lower front door
6.1.15 Front lower cover
6.1.16 Front cover
6.1.17 Left cover
6.1.18 Exit cover
6.1.19 Output rear cover
6.1.20 Rear right cover
6.1.21 Upper right cover
6.1.22 Lower rear cover
6.1.23 DF cable cover
6.1.24 Duct cover/1
6.1.25 Duct cover/2, filter assy
6.1.26 Upper rear cover
6.1.27 Protective shield
6.1.28 Protective sheet
6.1.29 Tray 1
6.1.30 Tray 2
6.2 Units
6.2.1 LED exposure unit
6.2.2 Paper feed unit
6.2.3 PH unit
6.2.4 Sub hopper unit
6.2.5 Right door unit
6.2.6 Manual bypass tray unit
6.2.7 Regist unit
6.2.8 Hard disk (A)
6.2.9 How to open the PWB box/1
6.2.10 PWB box/2 (bizhub 658e/558e)
6.2.11 Main drive unit
6.2.12 Transport unit
6.2.13 IH coil (IHC) (bizhub 658e/558e)
6.2.14 Fusing drive unit (bizhub 658e/558e)
6.2.15 Fusing drive unit (bizhub 458e)
6.2.16 Hopper drive unit (bizhub 658e/558e)
6.2.17 Hopper drive unit (bizhub 458e)
6.2.18 ADU transport unit
6.2.19 Paper exit unit
6.3 Boards
6.3.1 CCD board (CCDB)
6.3.2 Scanner drive board (SCDB)
6.3.3 Machine condition monitor board (MCMB)
6.3.4 Front side board (FRB)
6.3.5 PH relay board (PHRYB)
6.3.6 DC power supply (DCPU)
6.3.7 EEPROM 1, EEPROM 2
6.3.8 eMMC board (eMMCB)
6.3.9 MFP board (MFPB)
6.3.10 High voltage unit (HV)
6.3.11 Expansion control board (EXCB)
6.3.12 Dual scan image processing board (DSIPB)
6.3.13 IH magnetic erasing board (IHMEB) (bizhub 658e/558e)
6.3.14 IH power supply unit (IHPU) (bizhub 658e/558e)
6.3.15 NF board (NFB) (bizhub 658e/558e)
6.3.16 Fusing power supply (FUPU) (bizhub 458e)
6.3.17 Tray 1 FD paper size board (FDPSB/1), tray 2 FD paper size board (FDPSB/2)
6.3.18 Tray 1 CD paper size board (CDPSB/1), tray 2 CD paper size board (CDPSB/2)
6.3.19 Tray 1 empty indicator board (PEIB/1), tray 2 empty indicator board (PEIB/2)
6.4 Motors
6.4.1 Transport motor (M1)
6.4.2 Fusing motor (M3)
6.4.3 Reverse motor (M4)
6.4.4 ADU transport motor1 (M5)
6.4.5 Toner supply motor/K (M6)
6.4.6 Fusing pressure motor (M11)
6.4.7 Tray 1 lift-up motor (M12)
6.4.8 Tray 2 lift-up motor (M13)
6.4.9 Paper feed motor (M22)
6.4.10 Tray 2 vertical transport motor (M23)
6.4.11 Registration motor (M24) (bizhub 658e)
6.4.12 Toner cartridge motor/K (M25)
6.4.13 ADU transport motor/2 (M26)
6.4.14 Scanner motor (M201)
6.5 Clutches
6.5.1 Tray 2 paper feed clutch (CL1)
6.5.2 Registration clutch (CL4)
6.5.3 Bypass paper feed clutch (CL7)
6.5.4 Paper exit clutch (CL8)
6.5.5 Paper exit deceleration clutch (CL9)
6.6 Fans
6.6.1 Power supply cooling fan (FM1)
6.6.2 Transfer belt cleaner cooling fan (FM2)
6.6.3 Rear side cooling fan (FM3)
6.6.4 Toner cartridge cooling fan (FM4) (bizhub 658e)
6.6.5 IH coil cooling fan (FM7) (bizhub 658e/558e)
6.6.6 Paper cooling fan (FM8)
6.6.7 Toner suction fan (FM11)
6.6.8 Fusing power supply cooling fan (FM12)
6.6.9 UFP exhaust fan1 (FM17)
6.6.10 UFP exhaust fan2 (FM18) (bizhub 658e/558e)
6.7 Others
6.7.1 Bypass pick-up solenoid (SD1)
6.7.2 IDC sensor shutter solenoid (SD2)
6.7.3 Gate switch solenoid (SD3)
6.7.4 Developing solenoid (SD4)
6.7.5 Soaking roller pressure solenoid (SD5) (bizhub 658e/558e)
6.7.6 FAX speaker (SP1)
6.7.7 Bypass CD paper size VR (VR1)
7. Dual scan document feeder (DF-703)
7.1 Front cover (dual scan document feeder)
7.2 Rear cover (dual scan document feeder)
7.2.1 Removal
7.3 How to open the document feed tray (dual scan document feeder)
7.3.1 Document feed tray with a movable lock lever
7.3.2 Document feed tray with a fixed lock lever
7.4 Stamp unit cover (dual scan document feeder)
7.4.1 For a snap-fit stamp unit cover
7.4.2 For a screw fixing stamp unit cover
7.5 Lower guide assembly (dual scan document feeder)
7.5.1 Procedure
7.6 Dual scan document feeder
7.7 Front side glass cleaning roller unit (dual scan document feeder)
7.8 Back side glass cleaning roller unit (dual scan document feeder)
7.9 CIS module (CIS) (dual scan document feeder)
7.10 DF control board (DFCB) (dual scan document feeder)
7.11 Restriction plate positional volume (VR1) (dual scan document feeder)
7.12 DF power supply (DFPU) (dual scan document feeder)
7.13 Sensor control board (SCB)
7.14 Multi feed detection board/1 (transmitter) (MFDB/1) (UK-501)
7.15 Multi feed detection board/2 (receiver) (MFDB/2)
7.16 Take-up motor (M1) (dual scan document feeder)
7.17 Registration motor (M2) (dual scan document feeder)
7.18 Reading motor (M3) (dual scan document feeder)
7.18.1 Remove procedure
7.18.2 Reinstall procedure
7.19 Exit motor (M4) (dual scan document feeder)
7.20 Reading roller pressure/retraction motor (M6) (dual scan document feeder)
7.21 Back side cleaning motor (M7) (dual scan document feeder)
7.22 Front side cleaning motor (M8) (dual scan document feeder)
7.23 Take-up clutch (CL1) (dual scan document feeder)
7.24 Cooling fan motor (FM) (dual scan document feeder)
7.25 Replacing the separation roller torque limiter (dual scan document feeder)
7.26 Stamp unit (SP-501)
7.27 Stamp (SP-501)
8. DF-629/SP-501
8.1 Front cover (DF-629)
8.2 Rear cover (DF-629)
8.3 Left cover unit (DF-629)
8.4 Reverse automatic document feeder (DF-629)
8.5 Glass cleaning roller unit (DF-629)
8.6 DF control board (DFCB) (DF-629)
8.7 Document width size sensor (VR1) (DF-629)
8.8 Document reading motor (M1) (DF-629)
8.9 Document feed motor (M2) (DF-629)
8.10 Registration motor (M3) (DF-629)
8.11 Glass cleaning motor (M4) (DF-629)
8.12 Reading roll release motor (M5) (DF-629)
8.13 DF cooling fan motor (FM1) (DF-629)
8.14 Document exit roller release solenoid (SD1) (DF-629)
8.15 Stamp unit (SP-501)
8.16 Stamp (SP-501)
9. DF-704/SP-501
9.1 Front cover (DF-704)
9.2 Rear cover (DF-704)
9.3 Left cover unit (DF-704)
9.4 Dual scan document feeder (DF-704)
9.5 Front side glass cleaning roller unit (DF-704)
9.6 Back side glass cleaning roller unit (DF-704)
9.7 CIS module (CIS) (DF-704)
9.8 DF control board (DFCB) (DF-704)
9.9 Document width size sensor (VR1) (DF-704)
9.10 CIS power supply (CISPU) (DF-704)
9.11 dual scan image processing board (DSIPB) (DF-704)
9.12 Document reading motor (M1) (DF-704)
9.12.1 Remove procedure
9.12.2 Reinstall procedure
9.13 Document feed motor (M2) (DF-704)
9.14 Registration motor (M3) (DF-704)
9.15 Reading roller release motor (M4) (DF-704)
9.16 CIS cleaning motor (M5) (DF-704)
9.17 Document reading glass cleaning motor (M6) (DF-704)
9.18 DF cooling fan motor (FM1) (DF-704)
9.19 CIS cable (DF-704)
9.20 Stamp unit (SP-501)
9.21 Stamp (SP-501)
10. PC-115/PC-215
10.1 Right door (PC-115/PC-215)
10.2 Rear right cover (PC-115/PC-215)
10.3 Rear cover (PC-115/PC-215)
10.4 Tray 3, tray 4 (PC-115/PC-215)
10.5 Paper feed cabinet (PC-115/PC-215)
10.6 Tray 3 paper feed unit (PC-115/PC-215)
10.7 Tray 4 paper feed unit (PC-215)
10.8 PC control board (PCCB) (PC-115/PC-215)
10.9 Tray 3 paper empty indicator board (PEIB/3), tray 4 paper empty indicator board (PEIB/4) (PC-115/PC-215)
10.10 Tray 3 FD paper size board (FDPSB/3), tray 4 FD paper size board (FDPSB/4) (PC-115/PC-215)
10.11 Tray 3 CD paper size board (CDPSB/3) (PC-115/PC-215)
10.12 Tray 4 CD paper size board (CDPSB/4) (PC-215)
10.13 Tray 3 paper feed motor (M111), tray 4 paper feed motor (M121) (PC-115/PC-215)
10.14 Tray 3 vertical transport motor (M112), tray 4 vertical transport motor (M122) (PC-115/PC-215)
10.15 Tray 3 lift-up motor (M113), tray 4 lift-up motor (M123) (PC-115/PC-215)
11. PC-415
11.1 Right door (PC-415)
11.2 Rear right cover (PC-415)
11.3 Rear cover (PC-415)
11.4 Paper feed tray (PC-415)
11.5 Paper feed cabinet (PC-415)
11.6 Paper feed unit (PC-415)
11.7 PC control board (PCCB) (PC-415)
11.8 Tray 3 paper empty indicator board (PEIB/3) (PC-415)
11.9 Paper feed motor (M131) (PC-415)
11.10 Vertical transport motor (M132) (PC-415)
11.11 Elevator motor (M134) (PC-415)
11.12 Shifter motor (M133) (PC-415)
11.13 Wire (PC-415)
12. LU-207
12.1 Right cover (LU-207)
12.2 Front cover (LU-207)
12.3 Rear cover (LU-207)
12.4 Feed cover (LU-207)
12.5 Large capacity unit (LU-207)
12.6 LU drive board (LUDB) (LU-207)
12.7 LU lift-up motor (M1) (LU-207)
12.8 LU paper feed motor (M2) (LU-207)
12.9 LU transport motor (M3) (LU-207)
12.10 Dehumidification heater (DH) (LU-207)
12.11 Lift wire (LU-207)
12.11.1 Removal
12.11.2 Mounting
13. LU-302
13.1 Upper door (LU-302)
13.2 Right cover (LU-302)
13.3 Front cover (LU-302)
13.4 Rear cover (LU-302)
13.5 Feed cover (LU-302)
13.6 Large capacity unit (LU-302)
13.7 LU drive board (LUDB) (LU-302)
13.8 LU lift-up motor (M1) (LU-302)
13.9 Dehumidification heater (DH) (LU-302)
13.10 Lift wire (LU-302)
13.10.1 Removal
13.10.2 Mounting
14. JS-506
14.1 Exit tray 1 (JS-506)
14.2 Exit tray 2 (JS-506)
14.3 Job separator (JS-506)
14.4 Sensor unit (JS-506)
14.5 JS control board (JSCB) (JS-506)
14.6 Tray shift motor (M1) (JS-506)
15. FS-533
15.1 Front cover (FS-533)
15.2 Upper cover (FS-533)
15.3 Rear cover (FS-533)
15.4 Finisher (FS-533)
15.5 Stapler unit (FS-533)
15.6 Paper exit tray unit (FS-533)
15.7 FS control board (FSCB) (FS-533)
15.8 Stapler relay board (STREYB) (FS-533)
15.9 Paper conveyance motor (M101) (FS-533)
15.10 Paper exit motor (M102) (FS-533)
15.11 Alignment roller motor (M103) (FS-533)
15.12 Exit roller lift up motor (M104) (FS-533)
15.13 Alignment motor/F (M105), Alignment motor/R (M106) (FS-533)
15.14 Stapler movement motor (M107) (FS-533)
15.15 Tray lift up motor (M109) (FS-533)
15.16 Paper surface detect solenoid (SD101) (FS-533)
15.17 Batch solenoid (SD102) (FS-533)
15.18 Paper exit roller solenoid (SD103) (FS-533)
15.19 Paper exit paddle (FS-533)
16. PK-519
16.1 Punch kit (PK-519)
16.2 PK control board (PKCB) (PK-519)
16.3 Punch motor (M201) (PK-519)
17. FS-536/FS-536SD
17.1 Rear cover (FS-536/FS-536SD)
17.2 Front door (FS-536/FS-536SD)
17.3 Front upper cover (FS-536/FS-536SD)
17.4 Left lower cover (FS-536/FS-536SD)
17.5 Front lower cover (FS-536/FS-536SD)
17.6 Finisher (FS-536/FS-536SD)
17.7 Relay unit (FS-536/FS-536SD)
17.8 Sensor unit (FS-536/FS-536SD)
17.9 Stapler unit (FS-536/FS-536SD)
17.10 FS control board (FSCB) (FS-536/FS-536SD)
17.11 FNS entry transport motor (M2) (FS-536/FS-536SD)
17.12 FNS discharge motor (M3) (FS-536/FS-536SD)
17.13 Receiving roller retraction motor (M4) (FS-536/FS-536SD)
17.14 FNS paddle motor (M5) (FS-536/FS-536SD)
17.15 Trailing edge stopper motor (M6) (FS-536/FS-536SD)
17.16 Alignment motor/front (M7) (FS-536/FS-536SD)
17.17 Alignment motor/rear (M8) (FS-536/FS-536SD)
17.18 Pre-eject drive motor (M9) (FS-536/FS-536SD)
17.19 Bundle eject motor (M10) (FS-536/FS-536SD)
17.20 Main tray up/down motor (M11) (FS-536/FS-536SD)
17.21 Paper receiving control motor (M12) (FS-536/FS-536SD)
17.22 Side stapler movement motor (M13) (FS-536/FS-536SD)
18. FS-536SD saddle section
18.1 Front cover (FS-536SD saddle section)
18.2 Saddle unit (FS-536SD)
18.3 Exit tray (FS-536SD saddle section)
18.4 Staple unit (FS-536SD saddle section)
18.5 SD control board (SDCB) (FS-536SD saddle section)
18.6 SD transport motor (M1) (FS-536SD saddle section)
18.7 Paper discharge control motor (M2) (FS-536SD saddle section)
18.8 Alignment motor (M3) (FS-536SD saddle section)
18.9 Stopper drive motor (M4) (FS-536SD saddle section)
18.10 Center fold roller motor (M5) (FS-536SD saddle section)
18.11 Center fold guide motor (M6) (FS-536SD saddle section)
18.12 SD paddle motor (M7) (FS-536SD saddle section)
18.13 Tri-folding guide motor (M8) (FS-536SD saddle section)
18.14 Center fold knife motor (M9) (FS-536SD saddle section)
18.15 Stopper solenoid (SD1) (FS-536SD saddle section)
19. PK-520
19.1 Punch kit (PK-520)
20. FS-537/FS-537SD
20.1 Upper cover/1 (FS-537/FS-537SD)
20.2 Upper cover/2 (FS-537/FS-537SD)
20.3 Upper cover/3 (FS-537/FS-537SD)
20.4 Rear cover (FS-537/FS-537SD)
20.5 Front door (FS-537/FS-537SD)
20.6 Front upper cover (FS-537/FS-537SD)
20.7 Front lower cover (FS-537/FS-537SD)
20.8 Main tray (Paper exit lower tray) (FS-537/FS-537SD)
20.9 Sub tray (Paper exit upper tray) (FS-537/FS-537SD)
20.10 Left upper cover (FS-537/FS-537SD)
20.11 Left lower cover (FS-537/FS-537SD)
20.12 Finisher (FS-537/FS-537SD)
20.13 Relay unit (FS-537/FS-537SD)
20.14 Sensor unit (FS-537/FS-537SD)
20.15 Stapler unit (FS-537/FS-537SD)
20.16 FS control board (FSCB) (FS-537/FS-537SD)
20.17 Bundle eject motor (M1) / Pre-eject drive motor (M2) / Stacker plate drive motor (M3) (FS-537/FS-537SD)
20.18 Route change gate motor (M4) (FS-537/FS-537SD)
20.19 Main tray up/down motor (M6) (FS-537/FS-537SD)
20.20 Paddle up/down motor (M7) / Arm drive motor (M8) / FNS paddle motor (M9) (FS-537/FS-537SD)
20.21 Receiving roller retraction motor (M10) (FS-537/FS-537SD)
20.22 Trail edge stopper motor/R (M11) (FS-537/FS-537SD)
20.23 Trail edge stopper motor/F (M12) (FS-537/FS-537SD)
20.24 Alignment motor/rear (M13) (FS-537/FS-537SD)
xiv
20.25 Alignment motor/front (M14) (FS-537/FS-537SD)
20.26 Paper receiving control motor (M15) (FS-537/FS-537SD)
20.27 SD discharge motor (M16) (FS-537/FS-537SD)
20.28 FNS discharge motor (M17) (FS-537/FS-537SD)
20.29 Sub tray discharge motor (M18) (FS-537/FS-537SD)
20.30 Stapler movement motor (M19) (FS-537/FS-537SD)
20.31 FNS entry transport motor (M20) (FS-537/FS-537SD)
20.32 ZU Discharge Motor (M21) (FS-537/FS-537SD)
21. FS-537SD saddle section
21.1 Front cover (FS-537SD saddle section)
21.2 Saddle unit (FS-537SD saddle section)
21.3 Exit tray (FS-537SD saddle section)
21.4 Staple unit (FS-537SD saddle section)
21.5 SD control board (SDCB) (FS-537SD saddle section)
21.6 SD transport motor (M1) (FS-537SD saddle section)
21.7 Paper discharge control motor (M2) (FS-537SD saddle section)
21.8 Alignment motor (M3) (FS-537SD saddle section)
21.9 Stopper drive motor (M4) (FS-537SD saddle section)
21.10 Center fold roller motor (M5) (FS-537SD saddle section)
21.11 Center fold guide motor (M6) (FS-537SD saddle section)
21.12 SD paddle motor (M7) (FS-537SD saddle section)
21.13 Tri-folding guide motor (M8) (FS-537SD saddle section)
21.14 Center fold knife motor (M9) (FS-537SD saddle section)
21.15 Paper transport belt motor (M34) (FS-537SD saddle section)
21.16 Stopper solenoid (SD1) (FS-537SD saddle section)
22. PK-523
22.1 Punch Kit (PK-523)
22.2 Punch control board (PKCB) (PK-523)
22.3 Paper size detect board (PSDTB) (PK-523)
22.4 Punch oscillating motor (M302) (PK-523)
23. ZU-609
23.1 Z Folding Unit (ZU-609)
23.2 ZU drive board (ZUDB) (ZU-609)
23.3 ZU relay board (ZURB) (ZU-609)
23.4 ZU transport motor (M500) (ZU-609)
23.5 Folding guide motor (M501) (ZU-609)
23.6 Pressure motor (M502) (ZU-609)
24. JS-602
24.1 Paper exit tray (JS-602)
24.2 Front cover (JS-602)
24.3 Rear cover (JS-602)
24.4 Job separator (JS-602)
24.5 Entrance switching solenoid (SD401) (JS-602)
25. PI-507
25.1 Upper cover (PI-507)
25.2 Rear cover (PI-507)
25.3 Operation panel cover assy (PI-507)
25.4 Post Inserter (PI-507)
25.5 PI drive board (PIDB) (PI-507)
25.6 PI operation board (PIOB) (PI-507)
25.7 PI relay board (PIRB) (PI-507)
25.8 Tray lift motor /Lw (M202) (PI-507)
25.9 Transfer motor (M203) (PI-507)
25.10 Transport roller drive motor (M204) (PI-507)
25.11 Folding guide motor (M501) (PI-507)
25.12 Transfer clutch /Lw (CL202) (PI-507)
25.13 Registration clutch (CL203) (PI-507)
25.14 Pick-up solenoid /Lw (SD202) (PI-507)
25.15 Paper size VR /Lw (VR202) (PI-507)
26. RU-513
26.1 RU transport motor (M1)
27. OT-506
27.1 Paper exit tray
28. SC-508
28.1 DSC board 1 (for front side) (SC-508)
28.2 DSC board 2 (for back side) (SC-508)
29. UK-211
29.1 Upgrade kit (UK-211)
30. UK-212
30.1 Upgrade kit (UK-212)
31. UK-215
31.1 Upgrade kit (UK-215)
32. FK-514
32.1 FAX Kit (Line1), FAX Kit (Line2) (FK-514)
32.2 FAX Kit (Line1), FAX Kit (Line2) (FK-514) (with MK-742)
33. FK-515
33.1 FAX board (line 3), FAX board (line 4) (FK-515)
34. HD-524
34.1 Hard disk (B) (HD-524)
35. CU-101
35.1 Clean unit cover
35.2 Clean unit (CU-101)
35.3 Clean unit drive board (CUDB)
35.4 Exhaust fan/1 (FM14)
35.5 Exhaust fan/2 (FM15)
35.6 Suction fan (FM16)
35.7 Deodorant filter/UFP filter
36. CU-102
36.1 Clean unit (CU-102)
36.2 Clean unit drive board (CUDB)
36.3 Exhaust fan/1 (FM14)
36.4 Exhaust fan/2 (FM15)
36.5 UFP filter
37. KP-101
37.1 Keypad (KP-101)
38. COMMERCIALLY AVAILABLE PARTS
38.1 Installing the key counter
38.1.1 Configuration
38.1.2 Procedure
38.2 Installing the original size sensor/2 (Option)

G) UTILITY MODE
1. Starting/Exiting
1.1 Starting procedure
1.2 Exiting procedure
2. One-Touch/User Box Registration
3. User Settings List
3.1 System Settings
3.1.1 User Settings > System Settings [1/2]
3.1.2 User Settings > System Settings [2/2]
3.2 Custom Display Settings
3.2.1 User Settings > Custom Display Settings [1/2]
3.2.2 User Settings > Custom Display Settings [2/2]
3.3 Copier Settings
3.3.1 User Settings > Copier Settings [1/4]
3.3.2 User Settings > Copier Settings [2/4]
3.3.3 User Settings > Copier Settings [3/4]
3.3.4 User Settings > Copier Settings [4/4]
3.4 Scan/Fax Settings
3.4.1 User Settings > Scan/Fax Settings [1/3]
3.4.2 User Settings > Scan/Fax Settings [2/3]
3.4.3 User Settings > Scan/Fax Settings [3/3]
3.5 Fax Settings
3.5.1 User Settings > Fax Settings
3.6 Printer Settings
3.6.1 User Settings > Printer Settings
3.7 Change Password
3.8 Change E-Mail Address
3.9 Register Authentication Information
3.10 Synchronize User Auth. and Account Track
3.11 Registered Application Settings
4. Administrator Settings List [1/2]
4.1 Administrator settings outline 1/2
4.2 System Settings
4.2.1 Administrator Settings > System Settings [1/3]
4.2.2 Administrator Settings > System Settings [2/3]
4.2.3 Administrator Settings > System Settings [3/3]
4.3 Administrator/Machine Settings
4.3.1 Administrator Settings > Administrator/Machine Settings
4.4 One-Touch/User Box Registration
4.4.1 Administrator Settings > One-Touch/User Box Registration
4.5 User Authentication/Account Track
4.5.1 Administrator Settings > User Authentication/Account Track [1/2]
4.5.2 Administrator Settings > User Authentication/Account Track [2/2]
4.6 Network Settings
4.6.1 Administrator Settings > Network Settings [1/4]
4.6.2 Administrator Settings > Network Settings [2/4]
4.6.3 Administrator Settings > Network Settings [3/4]
4.6.4 Administrator Settings > Network Settings [4/4]
4.7 Copier Settings
4.7.1 Administrator Settings > Copier Settings [1/2]
4.7.2 Administrator Settings > Copier Settings [2/2]
4.8 Printer Settings
4.8.1 Administrator Settings > Printer Settings [1/2]
4.8.2 Administrator Settings > Printer Settings [2/2]
4.9 Fax Settings
4.9.1 Administrator Settings > Fax Settings [1/2]
4.9.2 Administrator Settings > Fax Settings [2/2]
4.10 System Connection
4.10.1 Administrator Settings > System Connection
5. Administrator Settings List [2/2]
5.1 Administrator settings outline 2/2
5.2 Security Settings
5.2.1 Administrator Settings > Security Settings [1/3]
5.2.2 Administrator Settings > Security Settings [2/3]
5.2.3 Administrator Settings > Security Settings [3/3]
5.3 License Settings
5.3.1 Administrator Settings > License Settings
5.4 Authorization function Setting
5.4.1 Administrator Settings > Authorization function Setting
5.5 Voice Guidance Settings
5.6 OpenAPI Certification Management Setting
5.6.1 Administrator Settings > OpenAPI Certification Management Setting
5.7 External Memory Backup
5.7.1 Administrator Settings > External Memory Backup
5.8 Remote Access Setting
5.9 Eco Copier Settings
6. Administrator Shortcut Settings
6.1 Administrator Shortcut Settings [1/2]
6.2 Administrator Shortcut Settings [2/2]
7. Banner Printing
8. My Panel Settings
9. Device Information List
9.1 Device Information [1/2]
9.2 Device Information [2/2]
10. Remote Panel Operation List
11. Supplementary explanation of utility mode
11.1 User Authentication/Account Track-Authentication Device Settings
11.1.1 General Settings
11.1.2 Logoff Settings
11.2 Network Settings-Network Fax Settings
11.2.1 Network Fax Function Settings
11.2.2 SMTP TX Settings
11.2.3 SMTP RX Settings
11.3 Network Settings-Network I/F Configuration
11.3.1 Use
11.3.2 Default setting
11.4 Network Settings-Wireless Network Setting
11.4.1 Use
11.5 Network Settings-IWS Settings
11.5.1 Use
11.5.2 Default setting
11.5.3 Setting item
11.5.4 Procedure
11.6 Network Settings – Remote Panel Settings (outline)
11.6.1 Methods of the Remote panel
11.7 Network Settings – Remote Panel Settings (Server Settings)
11.7.1 Use
11.7.2 Default setting
11.7.3 Setting item
11.7.4 Procedure
11.8 Network Settings – Remote Panel Settings (Client Settings)
11.8.1 Use
11.8.2 Default setting
11.8.3 Setting item
11.8.4 Procedure
11.9 Machine Update Settings – Internet ISW Settings
11.9.1 Update Firmware at Specified Time
11.9.2 FTP Server Settings
11.9.3 Firmware Update Parameters
11.10 Machine Update Settings – Machine Auto Update setting
11.10.1 Auto Update Settings for This Machine
11.10.2 Relay Server Function Setting
11.10.3 Log TX setting
11.10.4 Log Confirmation
11.10.5 Immediate Update
11.10.6 Machine Update Password
11.11 Machine Update Settings – HTTP Proxy Settings
11.11.1 Use
11.11.2 Default setting
11.11.3 Setting item
11.11.4 Procedure
11.12 Security Settings – Prohibited Functions When Authentication Error
11.12.1 Use
11.12.2 Default setting
11.12.3 Setting item
11.12.4 Procedure
11.13 Security Settings – Enhanced Security Mode
11.13.1 Use
11.13.2 Default setting
11.13.3 Setting item
11.14 Security Settings – HDD Encryption Setting
11.14.1 Use
11.14.2 Procedure
11.15 Security Settings – Debug Log Encryption Settings
11.15.1 Debug Log Encryption Settings
11.16 Security Settings – Image Log Transfer Settings (Type1)
11.16.1 Use
11.16.2 Default setting
11.16.3 Setting item
11.16.4 Procedure
11.17 Security Settings – Image Log Transfer Settings (Type2)
11.17.1 Use
11.17.2 Default setting
11.17.3 Setting item
11.17.4 Procedure
11.18 Security Settings – Driver Password Encryption Setting
11.18.1 Use
11.18.2 Default setting
11.18.3 Setting item
11.19 Security Settings – Quick Security Setting – Administrator Password
11.19.1 Use
11.19.2 Procedure
11.20 Security Settings – Quick Security Setting – USB Enable Settings
11.20.1 Use
11.20.2 Default setting
11.21 Security Settings – Quick Security Setting – Password Rules
11.21.1 Use
11.21.2 Default setting
11.21.3 Setting item
11.22 Security Settings – Quick Security Setting – Quick IP Filtering
11.22.1 Use
11.22.2 Default setting
11.22.3 Procedure
11.23 Security Settings – Quick Security setting – PSWC Setting
11.23.1 Use
11.23.2 Default setting
11.23.3 Setting item
11.24 Security Settings – Quick Security setting – Security Warning Display Setting
11.24.1 Use
11.24.2 Default setting
11.24.3 Setting item
11.25 License Settings
11.25.1 Get Request Code
11.25.2 Install License
11.25.3 List of Enabled Functions
11.26 Voice Guidance Settings-Voice Guidance
11.26.1 Use
11.26.2 Default setting
11.26.3 Setting item
11.27 External Memory Backup – Import/Export
11.27.1 Use
11.27.2 Procedure (Import)
11.27.3 Procedure (Export)
11.28 Remote Access Setting – Import/Export User Data
11.28.1 Use
11.28.2 Default setting
11.28.3 Setting item

H) SERVICE MODE
1. Check items before operation
1.1 Advance checks
2. Starting procedure
2.1 Procedure
3. Setting procedure
4. Exiting procedure
5. Adjustment item list
5.1 Replace feed roller, pick-up roller, separation roller (tray 1, tray 2)
5.2 Replace feed roller, separation roller assy (manual bypass tray)
5.3 Install LCT (Built-in)
5.4 Replace CCD board
5.5 Replace developing unit
5.6 Replace drum unit
5.7 Replace transfer belt unit
5.8 Replace fusing unit
5.9 Replace PH unit
5.10 Replace original size detection sensor
5.11 Replace scanner motor
5.12 Replace scanner home sensor
5.13 Replace MFP board
5.14 Replace eMMC board
5.15 Replace original glass
5.16 Replace hard disk
5.17 Replace control panel unit
5.18 Replace DF control board (when DF is mounted)
5.19 Add key counter
5.20 Execute initialize
5.21 Add an optional device
5.22 Execute F/W update
5.23 Add fax board
5.24 Mount DF-629, mount DF-704 or replace Dual scan document feeder
5.25 Replace CIS module (when DF-704 is mounted, or Dual scan document feeder is mounted)
6. Time Zone/Date & Time Input mode
6.1 Use
6.2 Procedure
7. Search
7.1 Use
7.2 Procedure
8. Machine
8.1 Trail Edge Color Alignment Adj (658e/558e/458e)
8.1.1 Use
8.1.2 Default setting
8.1.3 Setting range
8.1.4 Procedure
8.2 Fusing Temperature
8.2.1 Use
8.2.2 Default setting
8.2.3 Adjustment range
8.2.4 Procedure
8.3 Fusing Transport Speed
8.3.1 Use
8.3.2 Default setting
8.3.3 Adjustment range
8.3.4 Procedure
8.4 Heater Control Level (bizhub 458e/368e/308e)
8.4.1 Use
8.4.2 Default setting
8.4.3 Setting range
8.4.4 Procedure
8.5 Printer Area
8.5.1 Leading Edge Adjustment
8.5.2 Printer Image Centering Side 1
8.5.3 Leading Edge Adj. Side 2 (Duplex)
8.5.4 Prt. Image Center. Side 2 (Dup)
8.5.5 Paper Feed Direction Adj
8.5.6 Tray Printing Position: Tip
8.6 Scan Area
8.6.1 Image Position: Leading Edge
8.6.2 Scanner Image Side Edge
8.6.3 Main Scan Zoom Adj
8.6.4 Sub Scan Zoom Adj
8.7 Printer Reg. Loop Adj
8.7.1 Use
8.7.2 Setting range
8.7.3 Procedure
8.8 Main Scanning Direction Zoom
8.8.1 Use
8.8.2 Default setting
8.8.3 Setting range
8.8.4 Procedure
8.9 LD adjustment
8.9.1 LD Timing Adj
8.9.2 LD 1/2 Balance Adj
8.9.3 LD Light Width Adjustment
8.10 Manual Bypass Tray Width Adj
8.10.1 Use
8.10.2 Procedure
8.11 Lead Edge Erase Adjustment
8.11.1 Use
8.11.2 Default setting
8.11.3 Setting item
8.12 Non-Image Area Erase Check
8.12.1 Use
8.12.2 Procedure
8.13 ADF Scan Glass Contamination
8.13.1 Use
8.13.2 Procedure
8.14 PPM Control Choice
8.14.1 Use
8.14.2 Default setting
8.14.3 Functions
8.15 High Humidity PPM Adjustment (bizhub 658e/558e)
8.15.1 Use
8.15.2 Default setting
8.15.3 Setting range
8.15.4 Procedure
9. Firmware Version
9.1 Use
9.2 Procedure
10. Imaging Process Adjustment
10.1 Gradation Adjust
10.1.1 Use
10.1.2 Procedure
10.2 Stabilizer
10.2.1 Stabilization Only
10.2.2 Initialize+Image Stabilization
10.3 Density Balance Adjust (bizhub 658e/558e/458e)
10.3.1 Use
10.3.2 Procedure
10.4 Max Image Density Adj
10.4.1 Use
10.4.2 Default setting
10.4.3 Setting range
10.4.4 Procedure
10.5 Image Background Adj
10.5.1 Use
10.5.2 Default setting
10.5.3 Setting range
10.5.4 Procedure
10.6 Paper Separation Adjustment
10.6.1 Use
10.6.2 Default setting
10.6.3 Setting range
10.6.4 Procedure
10.7 Removable Voltage Adjust
10.7.1 Use
10.7.2 Default setting
10.7.3 Setting range
10.7.4 Procedure
10.8 TCR Level Setting
10.8.1 Use
10.8.2 Default setting
10.8.3 Setting range
10.8.4 Procedure
10.9 Transfer Voltage Fine Adj
10.9.1 Primary transfer adj
10.9.2 2nd Transfer Adj
10.10 Charge AC Output fine adjustment
10.10.1 Use
10.10.2 Default setting
10.10.3 Setting range
10.11 Thick Paper Density Adjustment
10.11.1 Use
10.11.2 Default setting
10.11.3 Setting range
10.11.4 Procedure
10.12 Grad/Dev AC Bias V Selection
10.12.1 Use
10.12.2 Default setting
10.12.3 Setting item
10.13 Manual Toner Add
10.13.1 Manual Toner Add
10.13.2 Hopper Toner Filling
11. CS Remote Care
11.1 CS Remote Care (Outlines)
11.2 Setting up
11.2.1 Setting up the CS Remote Care
11.2.2 Using the telephone line modem
11.2.3 Using the Fax line modem
11.2.4 Using the E-mail
11.2.5 When using a WebDAV server in http communication
11.2.6 Setup confirmation
11.2.7 Calling the maintenance
11.2.8 Calling the center from the administrator
11.2.9 Checking the transmission log
11.3 Maintenance/Default Settings
11.3.1 System Selection
11.3.2 ID Code
11.3.3 Detail Setting
11.4 Maintenance/Default Settings – Detail Setting – Software SW setting
11.4.1 Software SW setting for CS Remote Care
11.4.2 SW No. 01
11.4.3 SW No. 02
11.4.4 SW No. 03
11.4.5 SW No. 04
11.4.6 SW No. 05
11.4.7 SW No. 06
11.4.8 SW No. 07
11.4.9 SW No. 08
11.4.10 SW No. 09
11.4.11 SW No. 10
11.4.12 SW No. 11
11.4.13 SW No. 12
11.4.14 SW No. 14
11.4.15 SW No. 15
11.4.16 SW No. 18
11.4.17 SW No. 21
11.4.18 SW No. 22
11.4.19 SW No. 23
11.5 Server Setting
11.5.1 E-Mail1 or E-mail2 is selected
11.5.2 http1 or http2 is selected
11.6 Product Auth. Settings
11.6.1 Product Authentication
11.6.2 WebDAV
11.6.3 Register Manually
11.7 Import/Export Settings
11.7.1 WebDAV Setting
11.7.2 Port Number
11.7.3 SSL Settings
11.7.4 Data Initialization
11.8 Auto Initial Dial Setting
11.8.1 Use
11.8.2 Default setting
11.8.3 Setting item
12. System 1
12.1 Marketing Area
12.1.1 Use
12.1.2 Procedure
12.1.3 Setting item
12.2 Tel/Fax Number
12.2.1 Use
12.2.2 Procedure
12.3 Serial Number
12.3.1 Use
12.3.2 Procedure
12.4 Sleep ON/OFF Choice Setting
12.4.1 Use
12.4.2 Default setting
12.4.3 Setting item
12.5 Foolscap Size Setting
12.5.1 Use
12.5.2 Procedure
12.5.3 Default setting
12.5.4 Functions
12.6 Original Size Detection
12.6.1 Copy Glass
12.6.2 8-1/2 x 14/Foolscap Size Detection
12.6.3 ADF Size Detection
12.7 Install Date
12.7.1 Use
12.7.2 Procedure
12.8 Initialization-Clear All Data
12.8.1 Use
12.8.2 Procedure
12.9 Initialization-Clear Individual Data
12.9.1 Copy Program Data
12.9.2 Address Registration Data
12.9.3 Fax Setting Data
12.9.4 All History Data
12.9.5 Network Setting Data
12.9.6 Server Cache Data
12.10 Initialization-System Error Clear
12.10.1 Use
12.10.2 Procedure
12.11 Problem Unit Isolation Set
12.11.1 Use
12.11.2 Default setting
12.11.3 Setting item
12.12 Post card transfer table
12.12.1 Use
12.12.2 Default setting
12.12.3 Setting item
12.13 Warm-up
12.13.1 Change Warm Up Time
12.13.2 Low Power Consumption Mode (bizhub 558e)
12.14 Machine State LED Setting
12.14.1 Use
12.14.2 Default setting
12.14.3 Setting item
12.15 TP Level
12.15.1 Use
12.15.2 Default setting
12.15.3 Setting range
12.16 Burn Prevention Settings
12.16.1 Use
12.16.2 Default setting
12.16.3 Setting item
13. System 2
13.1 HDD
13.2 Option Board Status
13.2.1 Use
13.2.2 Default setting
13.2.3 Setting item
13.3 Consumable Life Reminder
13.3.1 Use
13.3.2 Default setting
13.3.3 Setting item
13.4 Unit Change
13.4.1 Unit Change
13.4.2 Warning display – Toner Near Empty
13.4.3 Warning display – Near Empty Display Time
13.4.4 Warning display – DU PreNear Life Display Time
13.4.5 Warning display – Near Life Display Settings
13.4.6 Warning display – Pre-Near Life Display Setting
13.5 Software Switch Setting
13.5.1 Use
13.5.2 Procedure
13.5.3 Software Switch Setting list
13.5.4 Details of the software switch settings
13.5.5 SW No.012
13.5.6 SW No.025
13.5.7 SW No.033
13.5.8 SW No.049 HEX 00 – HEX0A
13.5.9 SW No.049 HEX 80
13.5.10 SW No.051 HEX 00 – HEX80
13.5.11 SW No.069
13.5.12 SW No.070
13.5.13 SW No.072
13.5.14 SW No.124
13.5.15 SW No.135
13.5.16 SW No.143
13.5.17 SW No.145 HEX 01
13.5.18 SW No.145 HEX 02
13.5.19 SW No.145 HEX 04
13.5.20 SW No.145 HEX 08
13.5.21 SW No.145 HEX 10
13.5.22 SW No.146 HEX 04
13.5.23 SW No.146 HEX 10
13.5.24 SW No.151
13.5.25 SW No.152
13.5.26 SW No.155
13.5.27 SW No.157
13.5.28 SW No.163
13.5.29 SW No.192
13.5.30 SW No.203
13.5.31 SW No.206
13.5.32 SW No.227
13.5.33 SW No.230
13.6 CCD Calibration
13.6.1 Use
13.6.2 Default setting
13.6.3 Setting item
13.7 LCT (Built-in) Size Settings
13.7.1 Use
13.7.2 Default setting
13.7.3 Setting item
13.8 LCT Paper Size Setting
13.8.1 Use
13.8.2 Default setting
13.8.3 Setting item
13.8.4 A4LCT
13.8.5 A3LCT
13.9 Paper Reuse Box Setting
13.9.1 Use
13.9.2 Default setting
13.9.3 Setting item
13.10 Line Mag Setting
13.10.1 Use
13.10.2 Default setting
13.10.3 Setting item
13.11 Drum Idling Rotation setting
13.11.1 Use
13.11.2 Default setting
13.11.3 Setting item
13.12 Data Capture
13.12.1 Use
13.12.2 Procedure
13.13 ADF Scan Glass Contamin. Set
13.13.1 ADF Scan Glass Contamin. Sensitivity
13.13.2 ADF Scan Glass Contamin. Warn/Level
13.13.3 Feed Cleaning Settings
13.13.4 Display Timing (only when dual scan document feeder is mounted)
13.14 Stamp
13.14.1 Use
13.14.2 Default setting
13.14.3 Setting item
13.15 Network Fax Settings
13.15.1 Use
13.15.2 Default setting
13.15.3 Setting item
13.16 RX File Change Page Name
13.16.1 Use
13.16.2 Default setting
13.16.3 Setting item
13.17 ADF Settings
13.17.1 Use
13.17.2 Default setting
13.17.3 Setting item
13.18 Multifeed Sensor Status (bizhub 658e/558e/458e)
13.18.1 Use
13.18.2 Default setting
13.18.3 Setting item
13.19 User Paper Settings
13.19.1 Use
13.19.2 Procedure
13.20 Coverage Rate Screen
13.20.1 Use
13.20.2 Default setting
13.20.3 Setting item
13.21 JAM Code Display Setting
13.21.1 Use
13.21.2 Default setting
13.21.3 Setting item
13.22 Purge Setting
13.22.1 Use
13.22.2 Default setting
13.22.3 Setting item
13.23 Import Config. Data
13.23.1 BootUp Screen
13.23.2 Machine Image
13.23.3 Custom Auth. Setting
13.24 Install Data
13.24.1 Use
13.24.2 Procedure
13.25 Local Interface Kit Setting
13.25.1 Use
13.25.2 Default setting
13.25.3 Setting item
13.26 CIS Image Adjustment
13.26.1 Use
13.26.2 Default setting
13.26.3 Setting range
13.26.4 Procedure
13.27 Display Eco Index
13.27.1 Use
13.27.2 Default setting
13.27.3 Procedure
13.28 Internal Error. Auto Cancel
13.28.1 Use
13.28.2 Default setting
13.28.3 Behavior
13.29 Acquiring Settings
13.29.1 Use
13.29.2 Default setting
13.29.3 Setting item
13.30 Driver Install
13.30.1 Use
13.30.2 Procedure (Install)
13.30.3 Procedure (Uninstall)
13.31 Application Change Setting
13.31.1 Use
13.31.2 Default setting
13.31.3 Setting item
13.32 Custom Pattern
13.32.1 Use
13.32.2 Panel customization tool
13.32.3 Procedure
13.33 Maintenance Mode
13.33.1 Setting items
13.33.2 Exiting the Maintenance Mode
13.34 Smart Fusing Control
13.34.1 Use
13.34.2 Default setting
13.34.3 Setting item
13.35 Clean Unit Setting
13.35.1 Use
13.35.2 Default setting
13.35.3 Setting item
13.36 Auth. Function Enable
13.36.1 Activation
13.36.2 List
14. Counter
14.1 Common procedure
14.2 Life
14.2.1 Use
14.2.2 Procedure
14.2.3 New Release
14.2.4 New Release Disable mode
14.3 Service Total
14.3.1 Total
14.3.2 Paper Size 1/Paper Size 2
14.4 Section Service Call
14.4.1 Use
14.5 Warning
14.5.1 Use
14.5.2 Procedure
14.6 Maintenance
14.6.1 Use
14.6.2 Procedure
14.7 Counter of Each Mode
14.7.1 Use
14.8 Service Call History (Data)
14.8.1 Use
14.9 ADF Paper Pages
14.9.1 Use
14.10 Paper Jam History
14.10.1 Use
14.11 Fax Connection Error
14.11.1 Use
14.12 ADF Scan Glass Contamin. Counter
14.12.1 Use
14.12.2 Procedure
14.13 Parts Counter (Fixed)
14.13.1 Use
14.13.2 Procedure
14.13.3 Fixed parts to be counted
14.14 Jam
14.14.1 Use
14.15 Section JAM
14.16 Instantaneous Power Failure
14.16.1 Use
14.17 Detail code history
14.17.1 Use
14.18 Recoverable error counter
14.18.1 Use
15. List Output
15.1 Batch list CSV output
15.1.1 Use
15.1.2 Procedure
15.2 Machine Management List
15.2.1 Use
15.2.2 Procedure
15.3 Adjustments List
15.3.1 Use
15.3.2 Procedure
15.4 Parameter List
15.4.1 Use
15.4.2 Procedure
15.5 Service Parameter
15.5.1 Use
15.5.2 Procedure
15.6 Protocol Trace
15.6.1 Use
15.6.2 Procedure
15.7 Fax Setting List
15.7.1 Use
15.7.2 Procedure
15.8 Fax Analysis List
15.8.1 Use
15.8.2 Procedure
16. State Confirmation
16.1 Sensor Check
16.1.1 Use
16.1.2 Procedure
16.1.3 Sensor check screens
16.2 Table Number
16.2.1 Vdc-C Vg-C
16.2.2 LD Light Value
16.2.3 Charging AC Output Value 1
16.2.4 Charging AC Output Value 2
16.3 Level History 1
16.3.1 Use
16.3.2 Procedure
16.4 Level History 2
16.4.1 Use
16.4.2 Procedure
16.5 Temp. & Humidity
16.5.1 Use
16.5.2 Procedure
16.6 CCD Check
16.6.1 Use
16.6.2 Procedure
16.7 Memory/Storage Adjustment
16.7.1 Memory Check
16.7.2 Compress / Decompression Check
16.7.3 JPEG check (bizhub 658e/558e/458e)
16.7.4 Memory Bus Check
16.7.5 DSC Bus Check
16.7.6 Storage R/W Check
16.7.7 Format
16.7.8 eMMC -> HDD Data Copy
16.7.9 HDD Mirroring Rebuild
16.8 Memory/Storage Status
16.8.1 Use
16.9 Load Check
16.9.1 Use
16.9.2 Procedure
16.9.3 Load check list
16.10 Adjustment Data List
16.10.1 Use
16.11 Self-diag. (Full)
16.11.1 Overview of self-diagnostic function
16.11.2 Use
16.11.3 Procedure (from SERVICE MODE menu)
16.11.4 Procedure (from main power switch ON)
16.11.5 Procedure (when NG is detected)
16.11.6 Auto Execution of Self-diag. (Full)
16.12 Self-diag. (Individual)
16.12.1 Prog. device
16.12.2 SPI Check
16.12.3 HDD Check
16.12.4 Sys/Image mem check
16.12.5 Various USB Check
16.12.6 CCD Board Check
16.12.7 CIS Board Check
16.12.8 DF Board Check
16.12.9 DSC Board Check
16.12.10 DSIP board Check
16.12.11 FAX Board Check
16.12.12 MFP Board Check
16.12.13 PCIe Check
17. Test Mode
17.1 Procedure for test pattern output
17.2 Gradation Pattern
17.2.1 Use
17.2.2 Procedure
17.3 Halftone Pattern
17.3.1 Use
17.3.2 Procedure
17.4 Lattice Pattern
17.4.1 Use
17.4.2 Procedure
17.5 Solid Pattern
17.5.1 Use
17.5.2 Procedure
17.6 Solid Pattern 2
17.6.1 Use
17.6.2 Procedure
17.7 Paper Passage Test
17.7.1 Use
17.7.2 Procedure
17.8 Fax Test
17.8.1 Signal Send Test
17.8.2 Signal Receive Test
17.8.3 NCU TEST
18. ADF
18.1 Original Stop Position
18.1.1 Use
18.1.2 Procedure
18.2 Registration Loop Adj
18.2.1 Use
18.2.2 Procedure
18.2.3 Default setting
18.2.4 Setting range
18.3 Auto Stop Position Adjustment
18.3.1 Use
18.3.2 Procedure
18.4 Paper Passage
18.4.1 Use
18.4.2 Procedure
18.5 Sensor Check
18.5.1 Use
18.5.2 Procedure
18.5.3 Sensor check screen
18.5.4 Sensor check list
18.6 Original Tray Width
18.6.1 Use
18.6.2 Procedure
18.7 Read Pos Adj
18.7.1 Use
18.7.2 Read Pos Adj
18.7.3 Auto Adjust
18.8 Feed Zoom
18.8.1 Use
18.8.2 Procedure
18.9 Scanning Light Adjustment
18.9.1 Use
18.9.2 Procedure
18.9.3 Setting range
18.10 Mixed original size adjustment
18.10.1 Use
18.10.2 Procedure
18.11 Home Read Position Adjust
18.11.1 Use
18.11.2 Procedure
18.11.3 Default setting
18.11.4 Setting range
18.12 FD-Mag. Adj. (B)
18.12.1 Use
18.12.2 Procedure
18.13 Main Scanning Direction Zoom
18.13.1 Use
18.13.2 Procedure
18.14 Skew Measurement
18.14.1 Use
18.14.2 Procedure
18.15 ADF automatic Adjustment
18.15.1 Skew Measurement
18.15.2 Sub Scanning
18.15.3 Main Scanning
18.16 Multi-Feed DetectionAdj
18.16.1 Use
18.16.2 Procedure
19. FAX
19.1 FAX setting (Address parameter list: for line 1)
19.1.1 Modem/NCU
19.1.2 Network
19.1.3 System
19.1.4 Fax File Format
19.1.5 Communication
19.1.6 List Output
19.1.7 Function Parameter
19.1.8 Initialization
19.1.9 FAX Line Std. Setting
19.2 FAX setting (Line2, Line 3, Line 4)
19.2.1 Modem/NCU
19.2.2 Network
19.2.3 Communication
19.2.4 Initialize
19.2.5 FAX Line Std. Setting
19.3 FAX setting (Address parameter list: for line 1, line 2, line 3 and line 4)
19.3.1 0b000#
19.3.2 0b001#
19.3.3 0b002#
19.3.4 0b003#
19.3.5 0b004#, 0b005#
19.3.6 0b006#
19.3.7 0e000#
19.3.8 0e001#
19.3.9 0e002#
19.3.10 0e003#
19.3.11 0e004#
19.3.12 0e005#
19.3.13 12000#
19.3.14 13000#
19.3.15 13001#, 13002#
19.3.16 13003#
19.3.17 13004#
19.3.18 13005#
19.3.19 13006#
19.3.20 13007#
19.3.21 13008#
19.3.22 98000#
19.4 FAX setting (Address parameter list: for line 1)
19.4.1 0e009#
19.4.2 0e00a#
19.4.3 0e00b#
19.4.4 0e00c#
19.4.5 0e00d#
19.4.6 0e00e#
19.4.7 0e00f#
19.4.8 0e010#
19.4.9 0e011#
19.4.10 0e012#
19.4.11 0f000#
19.4.12 0f001#
19.4.13 10000#
19.4.14 10001#
19.5 FAX setting (Address parameter list: for line 2)
19.5.1 0e01a#
19.5.2 0e01b#
19.5.3 0e01c#
19.5.4 0e01d#
19.5.5 0e01e#
19.5.6 0e01f#
19.5.7 0e020#
19.5.8 0e021#
19.5.9 0e022#
19.5.10 0e023#
19.5.11 0f002#
19.5.12 0f003#
19.5.13 10002#
19.5.14 10003#
19.6 FAX setting (Address parameter list: for line 3)
19.6.1 0e02b#
19.6.2 0e02c#
19.6.3 0e02d#
19.6.4 0e02e#
19.6.5 0e02f#
19.6.6 0e030#
19.6.7 0e031#
19.6.8 0e032#
19.6.9 0e033#
19.6.10 0e034#
19.6.11 0f004#
19.6.12 0f005#
19.6.13 10004#
19.6.14 10005#
19.7 FAX setting (Address parameter list: for line 4)
19.7.1 0e03c#
19.7.2 0e03d#
19.7.3 0e03e#
19.7.4 0e03f#
19.7.5 0e040#
19.7.6 0e041#
19.7.7 0e042#
19.7.8 0e043#
19.7.9 0e044#
19.7.10 0e045#
19.7.11 0f006#
19.7.12 0f007#
19.7.13 10006#
19.7.14 10007#
20. Finisher
20.1 FS-FN adjustment
20.1.1 FS-FN adjustment – Center Staple Position (FS-536SD/FS-537SD)
20.1.2 FS-FN adjustment – Half-Fold Position (FS-536SD/FS-537SD)
20.1.3 FS-FN adjustment – Punch Centering Fine Adj (PK-523)
20.1.4 FS-FN adjustment – Punch F. Sensor Intensity Adj. (PK-523)
20.1.5 FS-FN adjustment – Punch vertical position (Z-fold) (ZU-609)
20.1.6 FS-FN adjustment – Punch horizontal position (Z-fold) (ZU-609)
20.1.7 FS-FN adjustment – Resist loop size (Z-fold) (ZU-609)
20.1.8 FS-FN adjustment – Punch Registration Loop Adj (PK-523)
20.1.9 FS-FN adjustment – Punch Resist Loop Size (PI) (PI-507/PK-523)
20.1.10 FS-FN adjustment – 1st Z-Fold Position/2nd Z-Fold Position (ZU-609)
20.1.11 FS-FN adjustment – 1st Tri-Fold Adjustment/2nd Tri-Fold Adjustment (FS-536SD/FS-537SD)
20.1.12 FS-FN adjustment – Punch Edge Adj (PK-520/PK-523)
20.1.13 FS-FN adjustment – Punch Regist Loop Size (PK-520)
20.1.14 FS-FN adjustment – PI Size Detection (PI-507)
20.1.15 FS-FN adjustment – Post Inserter Adjustment (PI-507)
20.1.16 FS-FN adjustment – Finisher Components Test Mode (FS-533/FS-536/FS-536SD/FS-537/FS-537SD)
20.1.17 FS-FN adjustment – Alignment plate Position
20.1.18 FS-FN adjustment – Paper Alignment Guides W. Adj. (FS-536/FS-536SD/FS-537/FS-537SD)
20.1.19 FS-FN adjustment – ZFold1st Fold Loop Size (ZU-609)
20.1.20 FS-FN adjustment – ZFold2nd Fold Loop Size (ZU-609)
20.1.21 FS-FN adjustment – ZFold2nd Fold Speed (ZU-609)
20.1.22 FS-FN adjustment – ZFold Adjust Custom (ZU-609)
20.2 Max Staple Limit Setting (FS-537/FS-537SD)
20.2.1 Use
20.2.2 Procedure
20.2.3 Default setting
20.2.4 Setting range
20.3 Punch Option Setting
20.3.1 Use
20.3.2 Procedure
20.3.3 Default setting
20.4 Max. # of Folded Sheets Setting
20.4.1 Use
20.4.2 Procedure
20.4.3 Default setting
20.4.4 Setting range
20.5 Tri-Fold Output Setting (FS-537SD)
20.5.1 Use
20.5.2 Default setting
20.5.3 Setting item
20.6 Job Separator
20.6.1 Use
20.6.2 Procedure
21. Network Settings
21.1 2nd Network Setting – 2nd network card settings
21.1.1 Use
21.1.2 Default setting
21.1.3 Setting item
21.2 2nd Network Setting – Network Interface Settings
21.2.1 Use
21.2.2 Setting item
21.3 2nd Network Setting – SSID
21.3.1 Use
21.4 2nd Network Setting – Authentication/Encryption Algorithm
21.4.1 Use
21.4.2 Default setting
21.4.3 Setting item
21.5 2nd Network Setting – WEP Key
21.5.1 Use
21.5.2 Procedure
21.6 2nd Network Setting – Passphrase
21.6.1 Use
21.6.2 Procedure
21.7 2nd Network Setting – Wireless Channel
21.7.1 Use
21.7.2 Default setting
21.7.3 Setting item
21.8 2nd Network Setting – ANY Connection
21.8.1 Use
21.8.2 Default setting
21.8.3 Setting item
21.9 2nd Network Setting – Connect permission extension address list
21.9.1 Use
21.9.2 Procedure
21.10 2nd Network Setting – DHCP Server Setting
21.10.1 Use
21.10.2 Default setting
21.10.3 Setting item
21.11 2nd Network Setting – TCP/IP Settings
21.11.1 Use
21.11.2 Procedure
21.12 Remote Service Setting
21.12.1 Function Setting
21.12.2 Proxy Server Setting
21.12.3 Maintenance Setting
21.12.4 XMPP Settings
21.12.5 Always Connection Setting
21.13 Port setting
21.13.1 Use
21.13.2 Default setting
21.13.3 Setting item
22. Machine Update Setting
22.1 Internet ISW
22.1.1 Internet ISW Set
22.1.2 HTTP Setting
22.1.3 FTP Setting
22.1.4 Forwarding Access Setting
22.1.5 Download
22.1.6 Update Start Time Settings
22.2 Machine Auto Update setting
22.2.1 Auto Update setting
22.2.2 Procedures for using the Auto Update function
22.2.3 Relay server setting
22.2.4 Procedures for using the Relay server function
22.2.5 Transmission log Update
22.2.6 Transmission Server Log
22.2.7 Update Log Display
22.2.8 Relay Server Log Confirmation
22.2.9 Manual Update
22.2.10 Machine Import setting
22.2.11 Machine Export setting
22.2.12 Machine Update Password
22.3 Firmware Rollback
22.3.1 Firmware Rollback
22.3.2 Open Mode Settings
22.4 Copy Network Settings
22.4.1 Use
22.4.2 Environmental preparations
22.4.3 Procedure

I) BILLING SETTING/ENHANCED SECURITY/OTHERS
1. BILLING SETTING
1.1 Starting/Exiting
1.1.1 Starting procedure
1.1.2 Exiting procedure
1.2 Counter Setting
1.2.1 Use
1.2.2 Default setting (Total Counter Mode)
1.2.3 Setting item (Total Counter Mode)
1.2.4 Default setting (Large Size Counter Mode)
1.2.5 Setting item (Large Size Counter Mode)
1.2.6 Count-up table
1.2.7 Default setting (Banner Paper Counter Mode)
1.2.8 Setting item (Banner Paper Counter Mode)
1.2.9 Default setting (Banner Counter Double Count Mode)
1.2.10 Setting item (Banner Counter Double Count Mode)
1.3 Management Function Choice
1.4 Management Function Choice – Key Counter IF Vendor
1.5 Management Function Choice – Key Counter Only
1.5.1 Use
1.5.2 Color Mode
1.5.3 Message
1.5.4 Confirmation copy
1.5.5 The next job reservation
1.5.6 Count Setting
1.6 Management Function Choice – Management Device-2
1.6.1 Use
1.6.2 Setting item (Management Setting)
1.6.3 Billing Line
1.7 Management Function Choice – Vendor 2
1.7.1 Use
1.7.2 Procedure
1.7.3 Procedure (Confirmation copy)
1.7.4 Procedure (The next job reservation)
1.7.5 Procedure (Count Setting)
1.7.6 Procedure (Message)
1.7.7 Billing Line
1.8 Authentication Device 2
1.8.1 Use
1.8.2 Setting item
1.8.3 Installation procedures of authentication unit
1.9 Setting items that automatically change the setting values
1.9.1 When the vendor2 is mounted
1.9.2 When the key counter IF vendor is mounted
1.9.3 When the management device 2 is mounted
1.9.4 When the authentication device 2 is mounted
1.10 Coverage Rate Clear
1.10.1 Use
1.10.2 Procedure
1.10.3 Default setting
1.10.4 Setting item
1.11 License management
1.11.1 Activation
1.11.2 Deactivation
1.11.3 Repair
1.11.4 Initialize
1.11.5 Request Code
1.11.6 List
1.11.7 Function List
1.12 Manage OpenAPI Authentication
1.12.1 Restriction Code
1.12.2 Region Code
1.13 WebDAV Server Setting
1.13.1 Select Address
1.13.2 Server Setting
1.13.3 Polling
1.14 Coverage Counter Setting
1.14.1 Use
1.14.2 Setting item (Coverage Rate Settings)
1.14.3 Procedure (Coverage Rate Settings)
1.14.4 Setting item (Coverage Rate Settings)
1.14.5 Procedure (Coverage Rate Coeff. Settings)
1.15 Print Counter Clear
1.15.1 Use
1.15.2 Procedure
1.15.3 Default setting
1.15.4 Setting item
1.16 Coverage Counter Detail
1.16.1 Use
2. ENHANCED SECURITY
2.1 Starting/Exiting
2.1.1 Starting procedure
2.1.2 Exiting procedure
2.2 CE Password
2.2.1 Use
2.2.2 Default setting
2.2.3 Procedure
2.3 Administrator Password
2.3.1 Use
2.3.2 Default setting
2.3.3 Procedure
2.4 Administrator Feature Level
2.4.1 Use
2.4.2 Default setting
2.4.3 Setting item
2.5 CE Authentication
2.5.1 Use
2.5.2 Default setting
2.5.3 Setting item
2.6 Life Stop Setting
2.6.1 Life stop
2.6.2 Life warning display
2.7 Memory Data Backup
2.7.1 Use
2.7.2 Procedure
2.8 operation Ban release time
2.8.1 Use
2.8.2 Default setting
2.8.3 Setting range
2.9 Administrator unlocking
2.9.1 Use
2.9.2 Procedure
2.10 Engine FW DipSW
2.10.1 Procedure
2.10.2 Engine FW DipSW list
2.10.3 DipSW No.1
2.10.4 DipSW No.2
2.10.5 DipSW No.3
2.10.6 DipSW No.4
2.10.7 DipSW No.5
2.10.8 DipSW No.6
2.10.9 DipSW No.8
2.10.10 DipSW No.9
2.10.11 DipSW No.11
2.10.12 DipSW No.13
2.10.13 DipSW No.17
2.10.14 DipSW No.18
2.10.15 DipSW No.22
2.10.16 DipSW No.24
2.10.17 DipSW No.26
2.10.18 DipSW No.27
2.10.19 DipSW No.28
2.10.20 DipSW No.29, 30
2.10.21 DipSW No.37, 38
2.10.22 DipSW No.43
2.10.23 DipSW No.45
2.10.24 DipSW No.47
2.10.25 DipSW No.48
2.10.26 DipSW No.49
2.10.27 DipSW No.50
2.10.28 DipSW No.55
2.11 Engine Data Backup
2.12 HDD Data Backup
2.12.1 Use
2.12.2 Setting item
2.12.3 Procedure
2.13 Data Backup
2.13.1 Use
2.13.2 Server Backup – Backup Settings
2.13.3 Server Backup – Auto backup
2.13.4 Server Backup – Immediate backup
2.13.5 Server Backup – Backup result
2.13.6 Restore from Server – Restore Setting
2.13.7 Restore Settings – Server settings
2.13.8 Restore from Server – Restore result
2.13.9 HDD Backup – Backup Settings
2.13.10 HDD Backup – Auto backup
2.13.11 HDD Backup – Immediate backup
2.13.12 HDD Backup – Backup result
2.13.13 Restore from HDD – Restore
2.13.14 Restore from HDD – Restore result
2.14 ADF Data Backup
2.14.1 Use
2.14.2 Procedure
2.15 Customer Type
2.15.1 Function Settings
2.16 TPM Setting
2.16.1 Initialization
2.16.2 Status report
3. DEBUG SETTINGS
3.1 Starting/Exiting
3.1.1 Starting procedure
3.1.2 Exiting procedure
3.2 DEBUG SETTINGS
3.2.1 Debug Log Output
3.2.2 Acquiring Mode
3.2.3 TX Debug Log Settings
3.2.4 Remote Log Retrieval
3.2.5 Remote Log Server Settings
3.2.6 Enable Core Dump
3.2.7 USB Password
3.2.8 Other
3.3 Operation of the debug log function
3.3.1 Basic mode
3.3.2 Enhance mode
4. SETUP WIZARD
4.1 Function outline
4.2 Starting/Exiting
4.2.1 Starting procedure
4.2.2 Exiting procedure
5. CONTENTS TO BE CLEARED BY RESET FUNCTION

J) MECHANICAL ADJUSTMENT
1. bizhub 368e/308e
1.1 Adjustment of the scanner motor belt
1.1.1 Purpose
1.1.2 Procedure
1.2 Centering adjustment of the tray 1/2
1.2.1 Purpose
1.2.2 Procedure
1.3 Pick-up pressure adjustment of the tray 1/2
1.3.1 Purpose
1.3.2 Procedure
1.4 Separator roller pressure adjustment of the bypass tray
1.4.1 Purpose
1.4.2 Procedure
1.5 Adjustment of the bypass CD paper size VR
1.5.1 Purpose
1.5.2 Procedure
1.6 Adjusting the parallelism of the fusing unit path
1.6.1 Purpose
1.6.2 Procedure
2. bizhub 658e/558e/458e
2.1 Adjustment of the scanner motor belt
2.1.1 Purpose
2.1.2 Procedure
2.2 Skew Adj
2.2.1 Purpose
2.2.2 Confirmation procedure
2.2.3 Adjustment procedure
2.3 Centering adjustment of the tray 1/2
2.3.1 Purpose
2.3.2 Procedure
2.4 Pick-up pressure adjustment of the tray 1/2
2.4.1 Purpose
2.4.2 Procedure
2.5 Separator roller pressure adjustment of the bypass tray
2.5.1 Purpose
2.5.2 Procedure
2.6 Adjustment of the bypass CD paper size VR
2.6.1 Purpose
2.6.2 Procedure
2.7 Adjusting the parallelism of the fusing unit path
2.7.1 Purpose
2.7.2 Procedure
3. DUAL SCAN DOCUMENT FEEDER
3.1 Adjusting the height
3.1.1 Purpose
3.1.2 Procedure
3.2 Adjusting front side skew feed on dual scan document feeder
3.2.1 Purpose
3.2.2 Procedure
3.3 Adjusting back side skew feed on dual scan document feeder
3.3.1 Purpose
3.3.2 Procedure
3.4 Adjusting the pressure of the separation roller
3.4.1 Purpose
3.4.2 Procedure
3.5 Adjusting multi-feed detection UK-501
4. DF-629
4.1 Adjusting the height
4.1.1 Purpose
4.1.2 Procedure
4.2 Adjusting front side skew feed on ADF
4.2.1 Purpose
4.2.2 Procedure
4.3 Adjusting the pressure of the separation roller
4.3.1 Purpose
4.3.2 Procedure
5. DF-704
5.1 Adjusting the height
5.1.1 Purpose
5.1.2 Procedure
5.2 Adjusting front side skew feed on ADF
5.2.1 Purpose
5.2.2 Procedure
5.3 Adjusting back side skew feed on ADF
5.3.1 Purpose
5.3.2 Procedure
5.4 Adjusting the pressure of the separation roller
5.4.1 Purpose
5.4.2 Procedure
6. PC-115/PC-215
6.1 Paper reference position
6.1.1 Purpose
6.1.2 Procedure
7. PC-415
7.1 Paper reference position
7.1.1 Purpose
7.1.2 Procedure
7.2 Shifter movement timing belt adjustment
7.2.1 Procedure
8. LU-207
8.1 Changing the paper size
8.1.1 Purpose
8.1.2 Procedure
8.2 Centering adjustment of the LCT
8.2.1 Purpose
8.2.2 Procedure
8.3 Pick-up roller load adjustment of the LCT
8.3.1 Purpose
8.3.2 Procedure
9. LU-302
9.1 Centering adjustment of the LCT
9.1.1 Purpose
9.1.2 Procedure
9.2 Pick-up roller load adjustment of the LCT
9.2.1 Purpose
9.2.2 Procedure
10. PK-519
10.1 Punch hole deviation correction
10.1.1 Purpose
10.1.2 Procedure
11. PK-520
11.1 Punch hole deviation correction
11.1.1 Purpose
11.1.2 Procedure
12. PK-523
12.1 Punch hole deviation correction
12.1.1 Purpose
12.1.2 Procedure
13. FS-536SD SADDLE SECTION
13.1 Half-fold skew adjustment
13.1.1 Purpose
13.1.2 Procedure
14. FS-537SD SADDLE SECTION
14.1 Half-fold skew adjustment
14.1.1 Purpose
14.1.2 Procedure

K) FIRMWARE
1. REWRITING OF FIRMWARE
2. Confirming the firmware version
2.1 Procedure
3. USB memory
3.1 Preparation
3.1.1 System preparation
3.1.2 USB memory used to update firmware
3.1.3 Directory configuration of USB memory
3.2 Procedure
3.3 Action when data transfer fails
4. Internet ISW
4.1 Outline
4.2 Service environment
4.3 Preparations for firmware rewriting
4.3.1 Internet ISW Set
4.3.2 Protocol setting
4.3.3 Forwarding Access Setting
4.3.4 Update Start Time Settings
4.4 Making the firmware data
4.4.1 Outline
4.4.2 Procedure
4.5 Firmware rewriting from the control panel
4.5.1 Firmware rewriting from the control panel
4.6 Firmware rewriting from the CS Remote Care
5. Auto Update setting
5.1 Firmware rewriting by the Auto Update function
6. Distribution Server Function (Relay server)
6.1 Firmware rewriting by the Relay server function
7. How to install the i-Option data
7.1 Available function for i-Option
7.2 LK-107/LK-108 font data installation procedure
8. Creating back up files when updating firmware
8.1 Procedure

L) TROUBLESHOOTING
1. JAM CODE
1.1 JAM display
1.1.1 Display procedure
1.1.2 Misfeed display resetting procedure
1.2 List of the JAM code (bizhub 368e/308e)
1.3 List of the JAM code (bizhub 658e/558e/458e)
1.4 JAM that do not display the JAM code
1.5 Sensor layout
1.5.1 bizhub 368e/308e
1.5.2 bizhub 658e/558e/458e
1.5.3 Dual scan document feeder
1.5.4 DF-704
1.5.5 DF-629
1.5.6 PC-115/PC-215
1.5.7 PC-415
1.5.8 LU-207/LU-302
1.5.9 FS-533/PK-519
1.5.10 FS-536/FS-536SD/PK-520
1.5.11 FS-537/FS-537SD/PK-523/PI-507/ZU-609
1.5.12 JS-602
1.6 Initial check items
1.7 Jam when thin or thick paper is fed
1.7.1 Paper jam for thin paper
1.7.2 Paper jam for thick paper
1.8 1#-## (bizhub 368e/308e)
1.8.1 10-01, 10-02, 10-40
1.8.2 11-01, 11-02, 11-40, 11-44
1.8.3 12-01, 12-40
1.8.4 13-01, 13-40
1.8.5 14-01, 14-40
1.8.6 15-01, 15-40
1.8.7 16-01, 16-40
1.9 1#-## (bizhub 658e/558e/458e)
1.9.1 10-01, 10-02, 10-04, 10-40
1.9.2 11-01, 11-02, 11-04, 11-40, 11-44
1.9.3 12-01, 12-40
1.9.4 13-01, 13-40
1.9.5 14-01, 14-40
1.9.6 15-01, 15-40
1.9.7 16-01, 16-40
1.10 2#-## (bizhub 368e/308e)
1.10.1 20-01, 20-02
1.10.2 20-21
1.10.3 20-22
1.11 2#-## (bizhub 658e/558e/458e)
1.11.1 20-01, 20-02, 20-04
1.11.2 20-21
1.11.3 20-22
1.12 3#-## (bizhub 368e/308e)
1.12.1 30-03
1.12.2 32-01, 32-05
1.13 3#-## (bizhub 658e/558e/458e)
1.13.1 30-03
1.13.2 32-01, 32-05, 32-30
1.14 6#-## (bizhub 368e/308e)
1.14.1 66-01, 66-11, 66-21
1.14.2 66-02, 66-12
1.14.3 66-03, 66-13, 66-23, 66-33
1.14.4 66-04, 66-14, 66-24, 66-34
1.14.5 66-05, 66-06, 66-15
1.14.6 66-07
1.15 6#-## (bizhub 658e/558e/458e)
1.15.1 66-02, 66-12
1.15.2 66-03, 66-13, 66-23, 66-33
1.15.3 66-04, 66-14
1.15.4 66-05, 66-06
1.15.5 66-08
1.15.6 66-54
1.16 7#-## (bizhub 658e/558e/458e/368e/308e)
1.16.1 72-11
1.16.2 72-14
1.16.3 72-15
1.16.4 72-16
1.16.5 72-17
1.16.6 72-18
1.16.7 72-19
1.16.8 72-21
1.16.9 72-22
1.16.10 72-23
1.16.11 72-25, 72-26
1.16.12 72-31, 72-34
1.16.13 72-35
1.16.14 72-40, 72-41
1.16.15 72-43
1.16.16 72-49
1.16.17 72-50
1.16.18 72-51
1.16.19 72-70
1.16.20 72-81
1.16.21 72-84
1.16.22 72-85
1.16.23 72-86
1.16.24 72-87
1.16.25 75-42
1.16.26 75-43
1.17 9#-## (bizhub 368e/308e)
1.17.1 92-01, 92-02, 92-40
1.17.2 93-10
1.17.3 99-01
1.17.4 99-02
1.17.5 99-03
1.17.6 99-04
1.17.7 99-05
1.17.8 99-06
1.17.9 99-07
1.17.10 99-08
1.17.11 99-09
1.18 9#-## (bizhub 658e/558e/458e)
1.18.1 92-01, 92-02, 92-04, 92-40
1.18.2 93-10
1.18.3 99-01
1.18.4 99-02
1.18.5 99-03
1.18.6 99-04
1.18.7 99-05
1.18.8 99-06
1.18.9 99-07
1.18.10 99-08
1.18.11 99-09
2. MALFUNCTION CODE
2.1 Display procedure
2.2 List of the malfunction code
2.3 S-1
2.3.1 Contents
2.3.2 Procedure
2.4 S-2
2.4.1 Contents
2.4.2 Procedure
2.5 D-1
2.5.1 Contents
2.5.2 Procedure
2.6 D-3
2.6.1 Contents
2.6.2 Procedure
2.7 P-5
2.7.1 Contents
2.7.2 Procedure
2.8 P-9
2.8.1 Contents
2.8.2 Procedure
2.9 P-27
2.9.1 Contents
2.9.2 Procedure
2.10 P-32 (bizhub 658e/558e)
2.10.1 Contents
2.10.2 Procedure
2.11 P-33
2.11.1 Contents
2.11.2 Procedure
3. TROUBLE CODE
3.1 Overview of Trouble Code
3.2 Overview of Troubleshooting Procedure
3.2.1 Troubleshooting Procedure
3.3 Trouble resetting procedure
3.3.1 Trouble resetting procedure by Trouble Reset key
3.3.2 Trouble resetting procedure by the auto cancel function
3.3.3 Trouble resetting procedure by remote operation
3.4 Nonvolatile memory clear function
3.4.1 Data to be cleared by the nonvolatile memory clear function
3.4.2 Start and execution procedure
3.5 Trouble isolation function
3.6 List of the trouble code (bizhub 368e/308e)
3.7 List of the trouble code (bizhub 658e/558e/458e)
3.8 C0### (bizhub 658e/558e/458e/368e/308e)
3.8.1 C0002 (bizhub 658e/558e/458e/368e/308e)
3.8.2 C0106 (bizhub 658e/558e/458e/368e/308e)
3.8.3 C0107 (bizhub 658e/558e/458e/368e/308e)
3.8.4 C0108 (bizhub 658e/558e/458e/368e/308e)
3.8.5 C0109 (bizhub 658e/558e/458e/368e/308e)
3.8.6 C0202 (bizhub 368e/308e)
3.8.7 C0202 (bizhub 658e/558e/458e)
3.8.8 C0204 (bizhub 368e/308e)
3.8.9 C0204 (bizhub 658e/558e/458e)
3.8.10 C0206 (bizhub 658e/558e/458e/368e/308e)
3.8.11 C0208 (bizhub 658e/558e/458e/368e/308e)
3.8.12 C0210 (bizhub 658e/558e/458e/368e/308e)
3.8.13 C0211 (bizhub 368e/308e)
3.8.14 C0211 (bizhub 658e/558e/458e)
3.8.15 C0214 (bizhub 658e/558e/458e/368e/308e)
3.8.16 C0216 (bizhub 368e/308e)
3.8.17 C0216 (bizhub 658e/558e/458e)
3.9 C1### (bizhub 658e/558e/458e/368e/308e)
3.9.1 C1003, C1013 (bizhub 658e/558e/458e)
3.9.2 C1004, C1014 (bizhub 658e/558e/458e/368e/308e)
3.9.3 C1007, C1017 (bizhub 658e/558e/458e)
3.9.4 C1081, C1082 (bizhub 658e/558e/458e/368e/308e)
3.9.5 C1102 (bizhub 658e/558e/458e/368e/308e)
3.9.6 C1103 (bizhub 658e/558e/458e/368e/308e)
3.9.7 C1104 (bizhub 658e/558e/458e)
3.9.8 C1105 (bizhub 658e/558e/458e/368e/308e)
3.9.9 C1106 (bizhub 658e/558e/458e/368e/308e)
3.9.10 C1109 (bizhub 658e/558e/458e/368e/308e)
3.9.11 C1112 (bizhub 658e/558e/458e/368e/308e)
3.9.12 C1113 (bizhub 658e/558e/458e/368e/308e)
3.9.13 C1114 (bizhub 658e/558e/458e/368e/308e)
3.9.14 C1115 (bizhub 658e/558e/458e/368e/308e)
3.9.15 C1124 (bizhub 658e/558e/458e)
3.9.16 C1125 (bizhub 658e/558e/458e)
3.9.17 C1127 (bizhub 658e/558e/458e)
3.9.18 C1130 (bizhub 658e/558e/458e)
3.9.19 C1131 (bizhub 658e/558e/458e)
3.9.20 C1132 (bizhub 658e/558e/458e/368e/308e)
3.9.21 C1133 (bizhub 658e/558e/458e)
3.9.22 C1140 (bizhub 658e/558e/458e/368e/308e)
3.9.23 C1141 (bizhub 658e/558e/458e/368e/308e)
3.9.24 C1142 (bizhub 658e/558e/458e)
3.9.25 C1143 (bizhub 658e/558e/458e)
3.9.26 C1144 (bizhub 658e/558e/458e/368e/308e)
3.9.27 C1145 (bizhub 658e/558e/458e/368e/308e)
3.9.28 C1146 (bizhub 658e/558e/458e)
3.9.29 C1152 (bizhub 658e/558e/458e)
3.9.30 C1156 (bizhub 658e/558e/458e/368e/308e)
3.9.31 C1182 (bizhub 558e/458e/368e/308e)
3.9.32 C1184 (bizhub 658e/558e/458e/368e/308e)
3.9.33 C1195 (bizhub 658e/558e/458e/368e/308e)
3.9.34 C1196 (bizhub 658e/558e/458e/368e/308e)
3.9.35 C1197 (bizhub 658e/558e/458e/368e/308e)
3.9.36 C11A1 (bizhub 558e/458e/368e/308e)
3.9.37 C11A2 (bizhub 658e/558e/458e/368e/308e)
3.9.38 C11C5 (bizhub 658e/558e/458e)
3.9.39 C11E1 (bizhub 658e/558e/458e/368e/308e)
3.9.40 C11E2 (bizhub 658e/558e/458e)
3.9.41 C1402 (bizhub 558e/458e/368e/308e)
3.9.42 C1403 (bizhub 658e/558e/458e)
3.9.43 C1404 (bizhub 658e/558e/458e)
3.10 C2### (bizhub 368e/308e)
3.10.1 C2355 (bizhub 368e/308e)
3.10.2 C2414 (bizhub 368e/308e)
3.10.3 C2557 (bizhub 368e/308e)
3.10.4 C2558 (bizhub 368e/308e)
3.10.5 C255C (bizhub 368e/308e)
3.10.6 C2564 (bizhub 368e/308e)
3.10.7 C2650, C265B (bizhub 368e/308e)
3.10.8 C265A (bizhub 368e/308e)
3.10.9 C2A14 (bizhub 368e/308e)
3.10.10 C2A24 (bizhub 368e/308e)
3.11 C2### (bizhub 658e/558e/458e)
3.11.1 C2350 (bizhub 658e/558e/458e)
3.11.2 C2355 (bizhub 658e/558e/458e)
3.11.3 C2414 (bizhub 658e/558e/458e)
3.11.4 C2557 (bizhub 658e/558e/458e)
3.11.5 C2558 (bizhub 658e/558e/458e)
3.11.6 C255C (bizhub 658e/558e/458e)
3.11.7 C2564 (bizhub 658e/558e/458e)
3.11.8 C2650, C265B (bizhub 658e/558e/458e)
3.11.9 C265A (bizhub 658e/558e/458e)
3.11.10 C2A14 (bizhub 658e/558e/458e)
3.11.11 C2A24 (bizhub 658e/558e/458e)
3.12 C3### (bizhub 368e/308e)
3.12.1 C3101, C3103 (bizhub 368e/308e)
3.12.2 C3201, C3202 (bizhub 368e/308e)
3.12.3 C3302 (bizhub 368e/308e)
3.12.4 C3425 (bizhub 368e/308e)
3.12.5 C3722, C3725, C3726 (bizhub 368e/308e)
3.12.6 C3736, C3739 (bizhub 368e/308e)
3.12.7 C3825, C3826 (bizhub 368e/308e)
3.12.8 C3922, C3925, C3926 (bizhub 368e/308e)
3.12.9 C392B (bizhub 368e/308e)
3.13 C3### (bizhub 658e/558e/458e)
3.13.1 C3101, C3103 (bizhub 658e/558e/458e)
3.13.2 C3102 (bizhub 658e/558e)
3.13.3 C3201, C3202 (bizhub 658e/558e/458e)
3.13.4 C3302 (bizhub 658e/558e/458e)
3.13.5 C3425 (bizhub 658e/558e/458e)
3.13.6 C3722, C3725, C3726 (bizhub 658e/558e/458e)
3.13.7 C3732, C3736, C3737, C3738, C3739 (bizhub 658e/558e/458e)
3.13.8 C3822, C3825, C3826 (bizhub 658e/558e/458e)
3.13.9 C3922, C3925, C3926 (bizhub 658e/558e/458e)
3.13.10 C392A (bizhub 658e/558e)
3.13.11 C392B (bizhub 658e/558e/458e)
3.13.12 C3B02, C3B03 (bizhub 658e/558e)
3.13.13 C3B07, C3B08 (bizhub 658e/558e)
3.13.14 C3B09 (bizhub 658e/558e)
3.14 C4### (bizhub 368e/308e)
3.14.1 C40A1, C40A2, C40A3, C40A4, C40C3, C40C5 (bizhub 368e/308e)
3.14.2 C4101 (bizhub 368e/308e)
3.14.3 C4501 (bizhub 368e/308e)
3.15 C4### (bizhub 658e/558e/458e)
3.15.1 C40A1, C40A2, C40A3, C40A4, C40C3, C40C5 (bizhub 658e/558e/458e)
3.15.2 C4101 (bizhub 658e/558e/458e)
3.15.3 C4501 (bizhub 658e/558e/458e)
3.16 C5### (bizhub 368e/308e)
3.16.1 C5102, C5103 (bizhub 368e/308e)
3.16.2 C5351 (bizhub 368e/308e)
3.16.3 C5360 (bizhub 368e/308e)
3.16.4 C5370 (bizhub 368e/308e)
3.16.5 C5501 (bizhub 368e/308e)
3.16.6 C5601 (bizhub 368e/308e)
3.16.7 C5603 (bizhub 368e/308e)
3.16.8 C5605, C5606 (bizhub 368e/308e)
3.16.9 C5610 (bizhub 368e/308e)
3.16.10 C5611 (bizhub 368e/308e)
3.17 C5### (bizhub 658e/558e/458e)
3.17.1 C5102, C5103 (bizhub 658e/558e/458e)
3.17.2 C5304 (bizhub 658e/558e)
3.17.3 C5306 (bizhub 658e/558e)
3.17.4 C5351 (bizhub 658e/558e/458e)
3.17.5 C5355 (bizhub 658e)
3.17.6 C5358 (bizhub 458e)
3.17.7 C5360 (bizhub 658e/558e/458e)
3.17.8 C5361 (bizhub 658e/558e/458e)
3.17.9 C5370 (bizhub 658e/558e/458e)
3.17.10 C5501 (bizhub 458e)
3.17.11 C5601 (bizhub 658e/558e/458e)
3.17.12 C5603 (bizhub 658e/558e/458e)
3.17.13 C5605, C5606 (bizhub 658e/558e/458e)
3.17.14 C5610 (bizhub 658e/558e/458e)
3.18 C6### (bizhub 368e/308e)
3.18.1 C6001 (bizhub 368e/308e)
3.18.2 C6002 (bizhub 368e/308e)
3.18.3 C6102, C6103 (bizhub 368e/308e)
3.18.4 C6104, C6105 (bizhub 368e/308e)
3.18.5 C6704 (bizhub 368e/308e)
3.18.6 C6751 (bizhub 368e/308e)
3.18.7 C6752 (bizhub 368e/308e)
3.18.8 C6753 (bizhub 368e/308e)
3.18.9 C6754, C6755 (bizhub 368e/308e)
3.18.10 C6756 (bizhub 368e/308e)
3.18.11 C6901, C6902, C6903 (bizhub 368e/308e)
3.18.12 C6911, C6912, C6913 (bizhub 368e/308e)
3.18.13 C6F01, C6F02, C6F03, C6F04, C6F05, C6F07, C6F08, C6F09, C6F0A, C6FFDC, C6FDD (bizhub 368e/308e).L-139
3.19 C6### (bizhub 658e/558e/458e)
3.19.1 C6001 (bizhub 658e/558e/458e)
3.19.2 C6002 (bizhub 658e/558e/458e)
3.19.3 C6102, C6103 (bizhub 658e/558e/458e)
3.19.4 C6104, C6105 (bizhub 658e/558e/458e)
3.19.5 C6704 (bizhub 658e/558e/458e)
3.19.6 C6751 (bizhub 658e/558e/458e)
3.19.7 C6752 (bizhub 658e/558e/458e)
3.19.8 C6753 (bizhub 658e/558e/458e)
3.19.9 C6754, C6755 (bizhub 658e/558e/458e)
3.19.10 C6756 (bizhub 658e/558e/458e)
3.19.11 C6901, C6902, C6903 (bizhub 658e/558e/458e)
3.19.12 C6911, C6912, C6913 (bizhub 658e/558e/458e)
3.19.13 C6F01, C6F02, C6F03, C6F04, C6F05, C6F07, C6F08, C6F09, C6F0A, C6FFDC, C6FDD (bizhub 658e/558e/458e)
3.20 C8### (bizhub 368e/308e)
3.20.1 C8101 (bizhub 368e/308e)
3.20.2 C8107 (bizhub 368e/308e)
3.20.3 C8302 (bizhub 368e/308e)
3.20.4 C8401 (bizhub 368e/308e)
3.21 C8### (bizhub 658e/558e/458e)
3.21.1 C8101 (bizhub 658e/558e/458e)
3.21.2 C8103 (bizhub 658e/558e/458e)
3.21.3 C8106 (bizhub 658e/558e/458e)
3.21.4 C8107 (bizhub 658e/558e/458e)
3.21.5 C8302 (bizhub 658e/558e/458e)
3.21.6 C8401 (bizhub 658e/558e/458e)
3.21.7 C8402 (bizhub 658e/558e/458e)
3.22 C9### (bizhub 368e/308e)
3.22.1 C9401, C9402 (bizhub 368e/308e)
3.22.2 C9403, C9404 (bizhub 368e/308e)
3.23 C9### (bizhub 658e/558e/458e)
3.23.1 C9401, C9402 (bizhub 658e/558e/458e)
3.23.2 C9403, C9404 (bizhub 658e/558e/458e)
3.24 CA### (bizhub 658e/558e/458e/368e/308e)
3.24.1 CA051, CA052, CA053 (bizhub 658e/558e/458e/368e/308e)
3.25 CC### (bizhub 658e/558e/458e/368e/308e)
3.25.1 CC002 (bizhub 658e/558e/458e/368e/308e)
3.25.2 CC140 (bizhub 368e/308e)
3.25.3 CC151, CC152 (bizhub 658e/558e/458e/368e/308e)
3.25.4 CC155 (bizhub 658e/558e/458e/368e/308e)
3.25.5 CC156 (bizhub 658e/558e/458e/368e/308e)
3.25.6 CC159, CC15A (bizhub 658e/558e/458e/368e/308e)
3.25.7 CC15B (bizhub 658e/558e/458e/368e/308e)
3.25.8 CC15C (bizhub 658e/558e/458e/368e/308e)
3.25.9 CC163 (bizhub 658e/558e/458e/368e/308e)
3.25.10 CC164 (bizhub 658e/558e/458e/368e/308e)
3.25.11 CC165 (bizhub 368e/308e)
3.25.12 CC170, CC171, CC172, CC173, CC174, CC180, CC181, CC182, CC183, CC184, CC185, CC186 (bizhub 658e/558e/458e/368e/308e)
3.25.13 CC190 (bizhub 658e/558e/458e/368e/308e)
3.25.14 CC191 (bizhub 658e/558e/458e/368e/308e)
3.25.15 CC211 (bizhub 658e/558e/458e/368e/308e)
3.25.16 CC212 (bizhub 658e/558e/458e/368e/308e)
3.25.17 CC213 (bizhub 658e/558e/458e/368e/308e)
3.25.18 CC214 (bizhub 658e/558e/458e/368e/308e)
3.25.19 CC216 (bizhub 658e/558e/458e/368e/308e)
3.25.20 CC301 (bizhub 658e/558e/458e/368e/308e)
3.25.21 CC302 (bizhub 658e/558e/458e/368e/308e)
3.25.22 CCC00 (bizhub 658e/558e/458e/368e/308e)
3.26 CD### (bizhub 658e/558e/458e/368e/308e)
3.26.1 CD002 (bizhub 658e/558e/458e/368e/308e)
3.26.2 CD004, CD00F, CD020 (bizhub 658e/558e/458e/368e/308e)
3.26.3 CD010 (bizhub 658e/558e/458e/368e/308e)
3.26.4 CD011 (bizhub 658e/558e/458e/368e/308e)
3.26.5 CD012 (bizhub 658e/558e/458e/368e/308e)
3.26.6 CD013, CD014 (bizhub 658e/558e/458e/368e/308e)
3.26.7 CD015 (bizhub 658e/558e/458e/368e/308e)
3.26.8 CD016 (bizhub 658e/558e/458e/368e/308e)
3.26.9 CD017 (bizhub 658e/558e/458e/368e/308e)
3.26.10 CD030 (bizhub 658e/558e/458e/368e/308e)
3.26.11 CD041, CD042, CD043, CD044, CD045, CD046 (bizhub 658e/558e/458e/368e/308e)
3.26.12 CD047, CD048, CD049, CD04A, CD04B (bizhub 658e/558e/458e/368e/308e)
3.26.13 CD050 (bizhub 658e/558e/458e/368e/308e)
3.26.14 CD110 (bizhub 658e/558e/458e/368e/308e)
3.26.15 CD201, CD202, CD203 (bizhub 658e/558e/458e/368e/308e)
3.26.16 CD211, CD212 (bizhub 658e/558e/458e/368e/308e)
3.26.17 CD241, CD242 (bizhub 658e/558e/458e/368e/308e)
3.26.18 CD261 (bizhub 658e/558e/458e/368e/308e)
3.26.19 CD262 (bizhub 658e/558e/458e/368e/308e)
3.26.20 CD271 (bizhub 368e/308e)
3.26.21 CD271 (bizhub 658e/558e/458e)
3.26.22 CD272 (bizhub 368e/308e)
3.26.23 CD272 (bizhub 658e/558e/458e)
3.26.24 CD3## (bizhub 658e/558e/458e/368e/308e)
3.26.25 CD313 (bizhub 658e/558e/458e/368e/308e)
3.26.26 CD38E (bizhub 658e/558e/458e/368e/308e)
3.26.27 CD390 (bizhub 658e/558e/458e/368e/308e)
3.26.28 CD391 (bizhub 658e/558e/458e/368e/308e)
3.26.29 CD392 (bizhub 658e/558e/458e/368e/308e)
3.26.30 CD3C0 (bizhub 658e/558e/458e/368e/308e)
3.26.31 CD401, CD402, CD403, CD404, CD405, CD406, CD407, CD411, CD412, CD413 (bizhub 658e/558e/458e/368e/308e)
3.26.32 CD601, CD602, CD603 (bizhub 658e/558e/458e/368e/308e)
3.26.33 CD701, CD702, CD703 (bizhub 658e/558e/458e/368e/308e)
3.26.34 CD704 (bizhub 658e/558e/458e/368e/308e)
3.26.35 CD705, CD706 (bizhub 658e/558e/458e/368e/308e)
3.26.36 CDC## (bizhub 658e/558e/458e/368e/308e)
3.26.37 CDF50, CDF70, CDFA0 (bizhub 658e/558e/458e/368e/308e)
3.26.38 CDF51, CDF71, CDFA1 (bizhub 368e/308e)
3.26.39 CDF51, CDF71, CDFA1 (bizhub 658e/558e/458e)
3.27 CE### (bizhub 658e/558e/458e/368e/308e)
3.27.1 CE001, CE003, CE004, CE005, CE006, CE007, CE009 (bizhub 658e/558e/458e/368e/308e)
3.27.2 CE002 (bizhub 658e/558e/458e/368e/308e)
3.27.3 CE101 (bizhub 658e/558e/458e/368e/308e)
3.27.4 CE201 (bizhub 658e/558e/458e/368e/308e)
3.27.5 CE202 (bizhub 658e/558e/458e/368e/308e)
3.27.6 CE203 (bizhub 658e/558e/458e/368e/308e)
3.27.7 CE301, CE302, CE303, CE304, CE305 (bizhub 658e/558e/458e/368e/308e)
3.27.8 CE401 (bizhub 658e/558e/458e/368e/308e)
3.27.9 CED01 (bizhub 658e/558e/458e/368e/308e)
3.27.10 CEEE1, CEEE3 (bizhub 658e/558e/458e/368e/308e)
3.27.11 CEEE2 (bizhub 658e/558e/458e/368e/308e)
3.28 CF### (Abort code)
3.28.1 CF0## – CF5## (bizhub 658e/558e/458e/368e/308e)
3.28.2 CF6## – CF7## (bizhub 658e/558e/458e/368e/308e)
3.28.3 CFA## (bizhub 658e/558e/458e/368e/308e)
3.28.4 CFB0# – CFB3# (bizhub 658e/558e/458e/368e/308e)
3.28.5 CFB5# – CFB8# (bizhub 368e/308e)
3.28.6 CFBD# – CFBE# (bizhub 368e/308e)
3.28.7 CFBF# – CFC4# (bizhub 368e/308e)
3.28.8 CFC7# – CFCD# (bizhub 368e/308e)
3.28.9 CFCE# (bizhub 368e/308e)
3.28.10 CFD4# – CFD5# (bizhub 368e/308e)
3.28.11 CFD6# (bizhub 368e/308e)
3.28.12 CFD7# – CFD9# (bizhub 368e/308e)
3.28.13 CFDC# – CFDF# (bizhub 368e/308e)
3.28.14 CFE3# (bizhub 368e/308e)
3.28.15 CFE4# – CFE7# (bizhub 368e/308e)
3.28.16 CFE9# – CFEC# (bizhub 368e/308e)
3.28.17 CFF0# (bizhub 368e/308e)
3.28.18 CFF1# – CFF4# (bizhub 368e/308e)
3.28.19 CFF6# – CFF9# (bizhub 368e/308e)
3.28.20 CFFD# – CFFE# (bizhub 368e/308e)
3.28.21 CFB6# – CFB9# (bizhub 658e/558e/458e)
3.28.22 CFBA# – CFBB# (bizhub 658e/558e/458e)
3.28.23 CFBC# (bizhub 658e/558e/458e)
3.28.24 CFBD# – CFC2# (bizhub 658e/558e/458e)
3.28.25 CFCA# – CFD3# (bizhub 658e/558e/458e)
3.28.26 CFD4# (bizhub 658e/558e/458e)
3.28.27 CFD5# – CFDA# (bizhub 658e/558e/458e)
3.28.28 CFDD# – CFE0# (bizhub 658e/558e/458e)
3.28.29 CFE1# – CFE6# (bizhub 658e/558e/458e)
3.28.30 CFE9# – CFEC# (bizhub 658e/558e/458e)
3.28.31 CFED# – CFF2# (bizhub 658e/558e/458e)
3.28.32 CFF5# – CFF8# (bizhub 658e/558e/458e)
3.28.33 CFF9# – CFFB# (bizhub 658e/558e/458e)
4. Troubleshooting using Self-diag. (Full)
4.1 Overview of Self-diag. (Full) function
4.2 Self-diag. (Full) Procedure
4.2.1 Auto Execution of Self-diag. (Full)
4.2.2 Error code resetting procedures
4.3 Error code list
4.4 E1-1
4.5 E1-2
4.6 E1-3
4.7 E2-1
4.8 E3-1
4.9 E3-2, E3-3, E3-4
4.10 E4-1, E4-2, E4-4
4.11 E5-1, E5-2, E5-3
4.12 E5-4
4.13 E5-6
4.14 E5-7, E5-8, E5-9, E5-10, E5-11
4.15 E5-12
4.16 E5-13
4.17 E6-1, E6-2
4.18 E7-1, E7-2
4.19 E8-1
4.20 E9-1
4.21 E10-1, 10-2
4.22 E13-1
4.23 E14-1, E14-2
5. Troubleshooting when NG is displayed on the Self-diag. (Individual)
5.1 Various USB Check
5.1.1 Troubleshooting when NG is displayed for Keyboard
5.1.2 Troubleshooting when NG is displayed for USB Memory
5.2 MFP Board Check
5.2.1 Troubleshooting when NG is displayed for Ping Test
6. ERROR CODE FOR THE INTERNET ISW
6.1 Error code list for the Internet ISW
6.2 0x0#
6.3 0x1#
6.4 0x2#
7. CS Remote Care ERROR CODE
7.1 Troubleshooting for CS Remote Care
7.2 CS Remote Care Operation under Enhanced Security Mode
7.3 List of the CS Remote Care error code
7.3.1 When connecting by modem
7.3.2 When connecting by e-mails
7.3.3 When connecting by http
7.3.4 When connecting by Fax modem
8. FAX TROUBLE CODE
8.1 The error in the transmission/reception system
8.2 B0##
8.3 B11#
8.4 B12#
8.5 B13#
8.6 B14#
8.7 B15#
8.8 B16#
8.9 B17#
8.10 B18#
8.11 B19#
8.12 T0#
8.13 T1#
8.14 T2#
8.15 T3#
8.16 T4#
8.17 T5#
8.18 T6#
8.19 T7#
8.20 T8#
8.21 T9#
8.22 R0#
8.23 R1#
8.24 R2#
8.25 R3#
8.26 R4#
8.27 R5#
8.28 R6#
8.29 R7#
8.30 R8#
8.31 R9#
8.32 Other
9. DIAGNOSTIC CODES
9.1 Outline
9.2 Explanation
9.2.1 The diagnostic code
9.2.2 Information of communication results and conditions
10. NETWORK FAX ERROR CODE
10.1 Error code list of the transmission system
10.2 Error code list of the reception system
11. Open API RELATED TROUBLE
11.1 Outline
11.2 Types of Trouble
11.3 Solution
11.3.1 When using an application
11.3.2 After rewriting the firmware of the machine
12. PANEL BLACKOUT TROUBLE (BOOT DIAGNOSIS FUNCTION)
12.1 Boot diagnosis function
12.1.1 Boot diagnosis sequence
12.1.2 Manual boot diagnosis procedure
12.1.3 Boot diagnosis result list
12.1.4 How to reset the boot diagnosis result
13. TROUBLES THAT DO NOT DISPLAY THE TROUBLE CODE
13.1 Machine is not energized at all (DCPU operation check)
13.1.1 Contents
13.1.2 Procedure
13.2 Fusing heaters do not operate (bizhub 658e/558e/458e/368e/308e)
13.2.1 Contents
13.2.2 Procedure
13.3 Power is not supplied to DF (bizhub 658e/558e/458e)
13.3.1 Contents
13.3.2 Procedure
13.4 Power is not supplied to option
13.4.1 DF-704/DF-629 (bizhub 368e/308e)
13.4.2 PC-115/PC-215/PC-415 (bizhub 658e/558e/458e/368e/308e)
13.4.3 FS-533/FS-536/FS-536SD/FS-537/FS-537SD (bizhub 658e/558e/458e/368e/308e)
14. OTHER TROUBLE
14.1 Firmware error warning
14.1.1 Action
14.2 HDD lock password error warning
14.2.1 Detection timing
14.2.2 Action
15. TROUBLESHOOTING OF i-Option
15.1 Structure of license management
15.2 License management information
15.3 Error message
15.3.1 License management error
16. IMAGE QUALITY PROBLEM
16.1 How to read element data
16.1.1 Table Number
16.1.2 Level History 1
16.1.3 Level History 2
16.2 Troubleshooting procedure overview
16.2.1 Test pattern printing
16.3 Corrective action procedure
16.3.1 White line 1, White band 1, Black line 1, Black band 1
16.3.2 White line 2, White band 2, Black line 2, Black band 2
16.3.3 Uneven density 1
16.3.4 Uneven density 2
16.3.5 Faint image, low image density (ID lowering)
16.3.6 Gradation reproduction failure
16.3.7 Foggy background
16.3.8 Void areas, White spots
16.3.9 Black spot
16.3.10 Blurred image
16.3.11 Back marking
16.3.12 Blank copy, Black copy
16.3.13 Uneven pitch
16.3.14 Uneven gloss, Rough gloss
16.3.15 Poor fusing performance, Offset
16.3.16 Brush effect, Image bleeding
16.3.17 Blurred fine lines
16.3.18 Moire
16.3.19 Skewed image
16.3.20 Distorted image
16.3.21 ACS malfunction
16.3.22 Abnormal image
17. IC PROTECTOR
17.1 Outline
17.2 IC protector list
17.2.1 bizhub 368e/308e
17.2.2 bizhub 658e/558e/458e
17.2.3 Dual scan document feeder
17.2.4 JS-506
17.2.5 FS-533
17.2.6 PK-519
17.2.7 FS-536/FS-536SD
17.2.8 FS-537/FS-537SD
17.2.9 PK-523
17.2.10 PI-507
17.2.11 ZU-609

M) PARTS/CONNECTOR LAYOUT DRAWING
1. PARTS LAYOUT DRAWING
1.1 bizhub 368e/308e
1.1.1 Scanner section
1.1.2 Front side
1.1.3 Back side
1.1.4 Left side
1.1.5 Right side
1.1.6 Manual bypass tray
1.1.7 Tray 1
1.1.8 Tray 2
1.1.9 Fusing/paper exit section
1.1.10 Duplex section
1.2 bizhub 658e/558e/458e
1.2.1 Scanner section
1.2.2 Front side section
1.2.3 Back side
1.2.4 Left side
1.2.5 Right side
1.2.6 Manual bypass tray
1.2.7 Tray 1
1.2.8 Tray 2
1.2.9 Fusing/paper exit section
1.2.10 Duplex section
1.2.11 Dual scan document feeder
1.3 DF-704/SP-501 (Option)
1.4 DF-629/SP-501 (Option)
1.5 PC-115/PC-215 (Option)
1.5.1 Board/switch/sensor/others
1.5.2 Load
1.6 PC-415 (Option)
1.6.1 Board/switch/sensor/others
1.6.2 Load
1.7 LU-302 (Option)
1.8 LU-207 (Option)
1.9 JS-506 (Option)
1.10 FS-533 (Option)
1.11 PK-519 (Option)
1.12 FS-537/FS-537SD (Option)
1.13 FS-537SD saddle section
1.14 ZU-609 (Option)
1.15 PK-523 (Option)
1.16 JS-602 (Option)
1.17 PI-507 (Option)
1.18 FS-536 (Option)
1.19 FS-536SD saddle section
1.20 PK-520 (Option)
1.21 CU-101 (Option)
1.22 CU-102 (Option)
2. CONNECTOR LAYOUT DRAWING
2.1 BOARD CONNECTOR LAYOUT DRAWING (bizhub 368e/308e)
2.1.1 bizhub 368e/308e
2.1.2 DF control board (DFCB)
2.1.3 Dual scan image processing board (DSIPB)
2.1.4 CIS power supply (CISPU)
2.1.5 PC control board (PCCB)
2.1.6 LU drive board (LUDB)
2.1.7 JS control board (JSCB)
2.1.8 FS control board (FSCB)
2.1.9 SD drive board (SDDB)
2.1.10 Stapler relay board (STREYB)
2.1.11 PK control board (PKCB)
2.1.12 Clean unit drive board (CUDB)
2.1.13 FAX board (FAXB)
2.2 BOARD CONNECTOR LAYOUT DRAWING (bizhub 658e/558e/458e)
2.2.1 bizhub 658e/558e/458e
2.2.2 Dual scan document feeder
2.2.3 PC control board (PCCB)
2.2.4 LU drive board (LUDB)
2.2.5 PK control board (PKCB)
2.2.6 JS control board (JSCB)
2.2.7 ZU drive board (ZUDB)
2.2.8 ZU relay board (ZURB)
2.2.9 FS control board (FSCB)
2.2.10 SD control board (SDCB)
2.2.11 Stapler relay board (STREYB)
2.2.12 PI drive board (PIDB)
2.2.13 PI relay board (PIRB)
2.2.14 Clean unit drive board (CUDB)
2.2.15 FAX board (FAXB)
2.3 RELAY CONNECTOR LAYOUT DRAWING
2.3.1 bizhub 368e/308e
2.3.2 bizhub 658e/558e
2.3.3 bizhub 458e

N) TIMING CHART
1. bizhub 368e/308e
1.1 Time chart when printing
2. bizhub 658e/558e/458e
2.1 Time chart when printing
3. Dual Scan Document Feeder
3.1 Operating conditions
3.2 Timing chart
4. LU-207/LU-302
4.1 Operating conditions
4.2 Timing chart
5. FS-536/FS-536SD
5.1 Shift mode
5.1.1 Operating conditions
5.1.2 Timing chart
5.2 Center staples mode
5.2.1 Operating conditions
5.2.2 Timing chart

O) WIRING DIAGRAM
1. bizhub 368e/308e
1.1 Main body
2. bizhub 658e/558e/458e
2.1 Main body
3. Dual scan document feeder
4. Option
4.1 DF-629
4.2 DF-704
4.3 PC-115
4.4 PC-215
4.5 PC-415
4.6 LU-207
4.7 LU-302
4.8 FS-533
4.9 JS-506
4.10 FS-536/FS-536SD
4.11 FS-537/FS-537SD
4.12 PK-523
4.13 ZU-609
4.14 PI-507

P) THEORY OF OPERATION bizhub 658e/558e/458e/368e/308e
1. INTERFACE SECTION
1.1 Configuration
1.1.1 Front side
1.1.2 Right side
1.1.3 Rear side
2. SCANNER SECTION
2.1 Configuration
2.2 Drive
2.3 Operation
2.3.1 LED exposure unit
2.3.2 When the power is ON
2.3.3 Control when the Start key is pressed
2.3.4 Original scanning area
2.3.5 Original size detection control
2.3.6 Image processing
3. WRITE SECTION (PH SECTION)
3.1 Configuration
3.2 Operation
3.2.1 Overview
3.2.2 Laser exposure process
3.2.3 Laser emission timing
3.2.4 Laser emission stop
3.2.5 Laser emission area
3.2.6 PH unit temperature detection control (bizhub 658e/558e/458e)
3.2.7 PH window cleaning
3.2.8 Image processing
4. PHOTOCONDUCTOR SECTION
4.1 Configuration
4.2 Drive
4.3 Operation
4.3.1 Photoconductor drive mechanism
4.3.2 Erase LED control
4.3.3 Photoconductor cleaning
4.3.4 Electrostatic charger control
4.3.5 Charging roller cleaning
4.3.6 Drum unit detection
5. DEVELOPING SECTION
5.1 Configuration
5.2 Drive
5.3 Operation
5.3.1 Developing unit/K pressure/releases mechanism
5.3.2 Developer flow
5.3.3 Auto refining developing system
5.3.4 Developing bias
5.3.5 Toner scattering prevention
5.3.6 Developing cooling
5.3.7 Toner density control
5.3.8 Developing unit detection
6. TONER SUPPLY SECTION
6.1 Configuration
6.2 Drive
6.2.1 Toner cartridge drive
6.2.2 Toner hopper drive
6.3 Operation
6.3.1 Toner replenishing overview
6.3.2 Toner replenishing from toner cartridge to toner hopper
6.3.3 Toner replenishing from toner hopper to developing unit
6.3.4 Auxiliary toner replenishing control for toner hopper
6.3.5 Auxiliary toner replenishing control for developing unit
6.3.6 Toner spillage prevention shutter
6.3.7 Toner supply PPM control
6.3.8 Front door mechanism
6.3.9 Toner empty detection control
6.3.10 Toner cartridge detection
7. 1ST TRANSFER SECTION
7.1 Configuration
7.2 Drive
7.3 Operation
7.3.1 Transfer belt drive
7.3.2 1st transfer roller control
7.3.3 1st transfer control
7.3.4 Transfer belt cleaning
7.3.5 Waste toner spillage prevention shutter
7.3.6 Cleaning blade foreign matter removal control
7.3.7 Transfer belt new article detection
8. 2ND TRANSFER SECTION
8.1 Configuration
8.2 Drive
8.3 Operation
8.3.1 2nd transfer control
8.3.2 Control of toner application to 2nd transfer roller
8.3.3 2nd transfer roller cleaning
8.3.4 Paper separation control
8.3.5 Paper winding prevention guide
8.3.6 IDC sensor protection
8.3.7 2nd transfer roller new article detection
9. TONER COLLECTING SECTION
9.1 Configuration
9.2 Drive
9.3 Operation
9.3.1 Waste toner box drive mechanism
9.3.2 Control of waste toner conveyance through waste toner box
9.3.3 Waste toner box-in-position detection
9.3.4 Waste toner box full detection
9.3.5 Waste toner box new article detection
9.3.6 Waste toner spillage prevention shutter
10. PAPER FEED SECTION (MANUAL BYPASS TRAY)
10.1 Configuration
10.2 Drive
10.3 Operation
10.3.1 Up/down control
10.3.2 Paper feed control
10.3.3 Paper size detection control
10.3.4 Paper empty detection control
10.3.5 Paper separation pressure switching mechanism
11. PAPER FEED SECTION
11.1 Configuration
11.1.1 Tray 1
11.1.2 Tray 2
11.2 Drive
11.3 Operation
11.3.1 Up/down control
11.3.2 Paper feed control
11.3.3 Paper feed retry control
11.3.4 Feed roller speed reduction control
11.3.5 Vertical transport roller speed reduction control
11.3.6 Paper transport control
11.3.7 Downstream exit control during multi-print cycle
11.3.8 Paper pick-up pressure switching mechanism
11.3.9 Paper size detection control
11.3.10 Paper length guide operation mechanism
11.3.11 Paper width guide
11.3.12 Remaining paper detection control
11.3.13 Paper feed tray locking mechanism
11.3.14 Roller retract mechanism
11.3.15 Paper feed tray stopper release mechanism
12. REGISTRATION SECTION
12.1 Configuration
12.1.1 bizhub 368e/308e
12.1.2 bizhub 558e/458e
12.1.3 bizhub 658e
12.2 Operation
12.2.1 Registration control
12.2.2 Right door mechanism
13. FUSING SECTION (bizhub 458e/368e/308e)
13.1 Configuration
13.2 Drive
13.2.1 Fusing section roller drive
13.2.2 Pressure roller pressure drive
13.3 Operation
13.3.1 Fusing drive release mechanism
13.3.2 Fusing speed correction
13.3.3 Fusing pressure/retraction control
13.3.4 Paper separation mechanism
13.3.5 Fusing temperature control
13.3.6 Plain paper fusing temperature control
13.3.7 Protection from abnormal temperatures
13.3.8 Fusing PPM control
13.3.9 Fusing unit new article detection
14. FUSING SECTION (bizhub 658e/558e)
14.1 Configuration
14.2 Drive
14.2.1 Fusing section roller drive
14.2.2 Pressure roller pressure drive
14.3 Operation
14.3.1 Heating roller assy heating control
14.3.2 Fusing drive release mechanism
14.3.3 Fusing speed correction
14.3.4 Fusing pressure/retraction control
14.3.5 Soaking roller pressurization/release control
14.3.6 Fusing paper transport control
14.3.7 Paper separation mechanism
14.3.8 Fusing temperature control
14.3.9 Protection from abnormal temperatures
14.3.10 IH power supply control
14.3.11 Temperature sensor control
14.3.12 Fusing PPM control
14.3.13 Fusing unit new article detection
15. PAPER EXIT/REVERSE SECTION
15.1 Configuration
15.1.1 bizhub 368e/308e
15.1.2 bizhub 658e/558e/458e
15.2 Drive
15.2.1 bizhub 368e/308e
15.2.2 bizhub 658e/558e/458e
15.3 Operation
15.3.1 Transport control
15.3.2 Paper exit roller speed reduction control (bizhub 658e)
16. DUPLEX SECTION
16.1 Configuration
16.1.1 bizhub 368e/308e
16.1.2 bizhub 658e/558e/458e
16.2 Drive
16.2.1 bizhub 368e/308e
16.2.2 bizhub 658e/558e/458e
16.3 Operation
16.3.1 Paper transport control
16.3.2 Duplex circulation control
17. IMAGE STABILIZATION CONTROL
17.1 Overview
17.2 Description of control
17.2.1 IDC sensor adjustment control
17.2.2 Max. density adjustment control
17.2.3 LD intensity adjustment control
17.2.4 Gamma correction control
17.3 Control contents
17.3.1 Image stabilization type (mode)
17.3.2 Control sequence by mode
17.4 Operation timing
17.4.1 Predrive operation
17.4.2 During a print cycle
17.4.3 Service Mode
17.4.4 Expert Adjustment
17.4.5 Stabilization time
18. IMAGE PROCESSING
18.1 Scanner section image processing block diagram
18.1.1 Processing flow
18.1.2 Detail
18.2 Write section image processing block diagram
18.2.1 Processing flow
18.2.2 Detail
19. POWER SUPPLY SECTION
19.1 Main power switch
19.2 Power key
19.2.1 Configuration
19.2.2 Operation
20. FAN CONTROL
20.1 Configuration
20.1.1 bizhub 368e/308e
20.1.2 bizhub 458e
20.1.3 bizhub 558e
20.1.4 bizhub 658e
20.2 Control
20.3 Operation
20.3.1 Power supply cooling fan
20.3.2 Transfer belt cleaner cooling fan
20.3.3 Machine rear side cooling fan
20.3.4 Toner cartridge cooling fan
20.3.5 IH coil cooling fan
20.3.6 Paper cooling fan
20.3.7 Toner suction fan
20.3.8 Fusing power supply cooling fan
20.3.9 UFP scavenging fan/1, UFP scavenging fan/2
21. COUNTER CONTROL
21.1 Configuration
21.2 Operation
22. HEATER
22.1 Configuration (HT-509/MK-735)
22.2 Configuration (LU/TK-101)
22.3 Control
22.3.1 HT-509/MK-735
22.3.2 LU/TK-101
23. INDICATOR FUNCTION
23.1 Configuration
23.1.1 Control panel section
23.1.2 Front side section
23.2 Control
23.2.1 Power key and Start key indicator section
23.2.2 Warning status indicator section
23.2.3 Operation status indicator section
23.2.4 Data indicator section
23.2.5 Remaining paper level display section

QA THEORY OF OPERATION DUAL SCAN DOCUMENT FEEDER / SP-501/UK-501 (bizhub 658e/558e/458e)
1. CONFIGURATION
1.1 Section configuration
1.2 Main parts configuration
2. PAPER PATH
2.1 Paper path
3. PAPER FEED SECTION
3.1 Configuration
3.2 Drive
3.3 Operation
3.3.1 Original set/empty detection
3.3.2 Original size detection mechanism
3.3.3 Up/down control for the document feed tray
3.3.4 Original take-up control
3.3.5 Double feed detection (UK-501)
4. REGISTRATION SECTION
4.1 Configuration
4.2 Drive
4.3 Operation
4.3.1 Registration control
5. READ SECTION
5.1 Configuration
5.2 Drive
5.3 Operation
5.3.1 Reading transport control
5.3.2 Reading roller pressure/retraction control
5.3.3 DF original glass contamination prevention control
5.3.4 CIS original reading control
5.3.5 CIS control when power is turned ON
5.3.6 CIS control when the document is loaded
5.3.7 CIS control when the start key is pressed
5.3.8 CIS glass contamination prevention control
5.3.9 Opening and closing guide set detection
6. PAPER EXIT SECTION
6.1 Configuration
6.2 Drive
6.3 Operation
6.3.1 Document exit mechanism
6.3.2 Faxed original stamp function SP-501
7. OPEN AND CLOSE DETECTION SECTION
7.1 DF angle open and close detection
7.2 DF open and close detection
8. FAN CONTROL
8.1 Function
8.2 Control condition

QB THEORY OF OPERATION DF-629
1. CONFIGURATION
1.1 Section configuration
1.2 Main part configuration
1.2.1 Main electrical part
1.2.2 Sensor
1.2.3 Roller placement
2. OVERVIEW
2.1 Paper path
2.1.1 1-sided paper path
2.1.2 2-sided paper path
2.2 Paper path operation
2.2.1 1-sided mode
2.2.2 2-sided mode
3. Document feed section
3.1 Drive
3.2 OPERATION
3.2.1 Document set/empty detection
3.2.2 Document size detection mechanism
3.2.3 Pick-up roller up/down control
3.2.4 Document feed/separation control
3.2.5 Document separation roller pressure switching mechanism
4. Document registration section
4.1 Drive
4.2 OPERATION
4.2.1 Document registration outline
4.2.2 Document registration loop formation process
5. Document reading section
5.1 DRIVE
5.1.1 Document reading drive
5.1.2 Document reading glass cleaning drive
5.2 OPERATION
5.2.1 Transport mechanism
5.2.2 Document reading glass cleaning mechanism
5.2.3 Document reading roll pressure/release control
5.2.4 Document reading front guide
6. PAPER EXIT/REVERSE SECTION
6.1 Drive
6.2 OPERATION
6.2.1 Document switchback/exit mechanism
6.2.2 Switching mechanism for document switchback/exit
6.2.3 Switchback exit roll pressure/retraction control
6.2.4 Faxed document stamp function
7. Open/Close detection section
7.1 Document exchange detection control
7.2 DF open/close detection
8. Cooling inside the unit mechanism
9. DF Skew(Front) adjustment mechanism
9.1 Hinge on the right side of the machine (front)
9.2 Hinge on the right side of the machine (rear)
9.3 Adjustment direction conceptual drawing

QC THEORY OF OPERATION DF-704
1. CONFIGURATION
1.1 Section configuration
1.2 Main part configuration
1.2.1 Main electrical part
1.2.2 Sensor
1.2.3 Roller placement
2. Overview
2.1 Paper path
2.2 Paper path operation
3. Document feed section
3.1 Drive
3.2 OPERATION
3.2.1 Document set/empty detection
3.2.2 Document size detection mechanism
3.2.3 Pick-up roller up/down control
3.2.4 Document feed/separation control
3.2.5 Document separation roller pressure switching mechanism
4. Document registration section
4.1 Drive
4.2 OPERATION
4.2.1 Document registration outline
4.2.2 Document registration loop formation process
5. Document reading section
5.1 DRIVE
5.1.1 Document reading drive
5.1.2 Document reading glass / CIS glass cleaning drive
5.2 1-sided document reading section
5.2.1 Document reading section
5.2.2 Document reading roll pressure/release control
5.2.3 Document reading front guide
5.2.4 Document reading glass cleaning mechanism
5.3 2-sided document reading section
5.3.1 CIS original reading mechanism
5.3.2 CIS control when power is turned ON
5.3.3 CIS control when the document is loaded
5.3.4 CIS control when the start key is pressed
5.3.5 CIS glass contamination prevention control
5.3.6 CIS cover
6. DOCUMENT EXIT SECTION
6.1 Drive
6.2 OPERATION
6.2.1 Document exit mechanism
6.2.2 Faxed document stamp function
7. OPEN AND CLOSE DETECTION SECTION
7.1 Document exchange detection control
7.2 DF open/close detection
8. Cooling inside the unit mechanism
9. DF skew adjustment mechanism
9.1 DF Skew(Front) adjustment mechanism
9.1.1 Hinge on the right side of the machine (front)
9.1.2 Hinge on the right side of the machine (rear)
9.1.3 Adjustment direction conceptual drawing
9.2 DF Skew(Back) adjustment mechanism
9.2.1 CIS module mounting area
9.2.2 Adjustment direction conceptual drawing

QD THEORY OF OPERATION PC-115/PC-215
1. CONFIGURATION
2. PAPER PATH
3. DRIVE
4. OPERATION
4.1 Paper feed section
4.1.1 Paper feed drive mechanism
4.1.2 Roller retract mechanism
4.1.3 Paper lifting motion
4.2 Paper feed tray section
4.2.1 Paper size detection
4.2.2 Paper feed tray locking mechanism
4.2.3 Paper feed tray stopper release mechanism
4.2.4 Remaining paper display mechanism

QE THEORY OF OPERATION PC-415
1. CONFIGURATION
2. PAPER PATH
3. DRIVE
4. OPERATION
4.1 Paper feed section
4.1.1 Paper feed drive mechanism
4.1.2 Roller retract mechanism
4.2 Main tray section
4.2.1 Main tray up / down mechanism
4.2.2 Main tray lower limit detection
4.3 Sub tray section
4.3.1 Shifter drive mechanism
4.3.2 Sub tray paper remaining amount
4.4 Remaining paper display mechanism
4.4.1 Display state

QF THEORY OF OPERATION LU-207
1. SECTION CONFIGURATION
2. PAPER PATH
3. CONFIGURATION
3.1 Appearance
3.2 Main part
3.3 Electrical part
4. DRIVE
4.1 Paper feed transport drive
4.2 Paper lift-up drive
5. OPERATION
5.1 Unit open/close section
5.1.1 Unit lock mechanism
5.1.2 LU door open/close detection mechanism
5.2 Paper storage section
5.2.1 Paper tray lifting mechanism
5.2.2 Paper tray lift-up drive release mechanism
5.2.3 Paper guide plate
5.3 Paper feed/transport section
5.3.1 Paper feed control
5.3.2 Paper feed control
5.3.3 Periodical replacement parts
5.3.4 Remaining paper level detection
5.3.5 Paper empty detection
5.3.6 Remaining paper display

QG THEORY OF OPERATION LU-302
1. CONFIGURATION
1.1 Section configuration
1.2 Paper path
1.3 Main part configuration
1.3.1 Appearance
1.3.2 Main part
1.3.3 Electrical part
2. DRIVE
2.1 Paper feed transport drive
2.2 Paper lift-up drive
3. OPERATION
3.1 Unit open/close section
3.1.1 Unit lock mechanism
3.1.2 LU door open/close detection mechanism
3.2 Paper storage section
3.2.1 Paper tray lifting mechanism
3.2.2 Paper tray lift-up drive release mechanism
3.2.3 Paper size detection
3.3 Paper feed/transport section
3.3.1 Paper feed and transport control
3.3.2 Remaining paper level detection
3.3.3 Paper empty detection
3.3.4 Remaining paper display

QH THEORY OF OPERATION JS-506
1. CONFIGURATION
1.1 Section configuration
1.2 Main part configuration
2. PAPER PATH
2.1 Paper feed to the exit tray
3. DRIVE
3.1 Paper transport drive mechanism for exit tray 1
3.2 Paper transport drive mechanism for exit tray 2
3.3 Exit tray 2 shift drive mechanism
4. OPERATION
4.1 Exit tray 1
4.1.1 Paper transport
4.1.2 Paper full detection
4.2 Exit tray 2
4.2.1 Paper transport
4.2.2 Paper shift mechanism
4.2.3 Paper full detection

QI THEORY OF OPERATION FS-533/PK-519
1. CONFIGURATION
1.1 Section configuration
2. PAPER PATH
2.1 No offset/No staple/Punch mode
2.2 Offset/No staple/Punch mode
3. Finisher section
3.1 Unit lock mechanism
3.1.1 Finisher unit lock mechanism
3.1.2 Punch unit lock mechanism (PK-519)
4. TRANSPORT SECTION
4.1 Configuration
4.2 Drive
4.2.1 Paper conveyance/receiving roller section
4.2.2 Paper exit roller section
4.3 Operation
4.3.1 Paper conveyance/receiving roller section paper transport control
4.3.2 Paper exit roller section paper transport control
4.3.3 Paper exit roller up/down control
4.3.4 Paper exit roller/lower drive connecting control
4.3.5 Paper exit paddle control
5. ALIGNMENT SECTION
5.1 Configuration
5.2 Drive
5.2.1 Alignment roller section
5.2.2 Alignment tray section
5.3 Operation
5.3.1 Paper FD alignment control
5.3.2 Paper CD alignment control
5.3.3 Alignment tray paper detect control
6. STAPLER SECTION
6.1 Configuration/Drive
6.2 Operation
6.2.1 Stapler positioning control
6.2.2 Staple control
6.2.3 Staple empty detection control
7. PAPER EXIT TRAY SECTION
7.1 Configuration
7.2 Drive
7.2.1 Tray lift up section
7.2.2 Paper level detect section
7.3 Operation
7.3.1 Paper exit tray lift up control
7.3.2 Paper level detect control
8. PUNCH SECTION (PK-519)
8.1 Configuration
8.1.1 Punch kit type
8.2 Drive
8.3 Operation
8.3.1 Skew correction mechanism
8.3.2 Punch control
8.3.3 Punch holes switch control
8.3.4 Punch dust full detection control

QJ THEORY OF OPERATION FS-536/FS-536SD/PK-520/RU-513
1. CONFIGURATION
1.1 Section configuration
1.2 Main parts configuration
2. PAPER PATH
2.1 Paper path (FS-536SD/PK-520)
3. RU-513
3.1 Configuration
3.2 Drive
3.3 Operation
3.3.1 Paper transport control
3.3.2 RU section door open/close detection mechanism
3.3.3 3rd exit tray full detection mechanism
4. FINISHER SECTION
4.1 Door open/close detection mechanism
4.1.1 Front door open/close detection mechanism
4.1.2 Upper door open/close detection mechanism
5. TRANSPORT SECTION
5.1 Configuration
5.2 Drive
5.3 Operation
5.3.1 Paper path switching mechanism
5.3.2 Receiving roller section up/down function
5.3.3 Buffer control
5.3.4 Sub tray exit mechanism
6. ALIGNMENT SECTION
6.1 Configuration
6.1.1 Upper paddle section
6.1.2 Alignment tray section
6.1.3 Exit section
6.2 Drive
6.2.1 Upper paddle section/Alignment tray section
6.2.2 Exit section
6.3 Operation
6.3.1 Paper transport control to alignment section
6.3.2 Paper alignment control
6.3.3 Paper exit control
7. STAPLER SECTION
7.1 Configuration
7.2 Drive
7.3 Operation
7.3.1 Stapler movement control
7.3.2 Staple control
7.3.3 Staple empty detection control
8. OUTPUT TRAY SECTION
8.1 Configuration
8.2 Drive
8.3 Operation
8.3.1 Main tray up/down mechanism
8.3.2 Main tray upper detection mechanism
8.3.3 Main tray paper level detection control
8.3.4 Tray full detection mechanism
9. SADDLE SECTION (FS-536SD)
9.1 Configuration
9.2 Transport section
9.2.1 Drive
9.2.2 Paper transport
9.2.3 Curl cover
9.3 Alignment section
9.3.1 Drive
9.3.2 Alignment
9.3.3 Stopper guide
9.4 Stapler
9.4.1 Drive
9.4.2 Operation
9.5 Folding/Saddle stitching
9.5.1 Drive
9.5.2 Folding knife
9.6 Tri-folding
9.6.1 Drive
9.6.2 Tri-folding operation
9.7 Exit section
9.7.1 Drive
9.7.2 Paper exit
9.7.3 Tray full detection mechanism
10. PK-520
10.1 Configuration
10.2 Drive
10.3 Operation
10.3.1 Skew correction control
10.3.2 Punch control
10.3.3 Puncher up/down status detection configuration
10.3.4 Punch dust box full detection mechanism
10.3.5 Punch dust box installation detection mechanism

QK THEORY OF OPERATION FS-537/FS-537SD/RU-513/PK-523/JS-602/PI-507/ZU-609
1. CONFIGURATION
1.1 Section configuration
1.2 Main parts configuration
2. PAPER PATH
2.1 Paper path (FS-537SD/PK-523/ZU-609/PI-507)
2.2 Paper path (FS-537/JS-602)
3. RU-513
3.1 Configuration
3.2 Drive
3.3 Operation
3.3.1 Paper transport control
3.3.2 RU section door open/close detection mechanism
3.3.3 3rd exit tray full detection mechanism
4. FINISHER SECTION
4.1 Door open/close detection mechanism
4.1.1 Front door open/close detection mechanism
5. TRANSPORT SECTION
5.1 Configuration
5.2 Drive
5.3 Operation
5.3.1 Route change gate
5.3.2 Sub tray/JS route change gate
5.3.3 Receiving roller section up/down function
5.3.4 Buffer control
5.3.5 Sub tray output
6. ALIGNMENT SECTION
6.1 Configuration
6.1.1 Upper paddle section
6.1.2 Alignment plate
6.1.3 Exit section
6.2 Drive
6.2.1 Upper paddle
6.2.2 Alignment plate
6.2.3 Exit section
6.3 Operation
6.3.1 Upper paddle
6.3.2 Alignment plate
6.3.3 Exit section
6.3.4 Stack support plate control
7. STAPLER SECTION
7.1 Configuration
7.2 Drive
7.3 Operation
7.3.1 Stapler position detection
7.3.2 Staple control
8. OUTPUT TRAY SECTION
8.1 Configuration
8.2 Drive
8.3 Operation
8.3.1 Main tray up/down mechanism
8.3.2 Main tray paper detection
8.3.3 Tray full detection mechanism
9. SADDLE SECTION FS-537SD
9.1 Configuration
9.2 Transport section
9.2.1 Drive
9.2.2 Paper transport
9.2.3 Curl cover
9.3 Alignment section
9.3.1 Drive
9.3.2 Alignment
9.3.3 Stopper guide
9.4 Stapler
9.4.1 Drive
9.4.2 Operation
9.5 Folding/Saddle stitching
9.5.1 Drive
9.5.2 Folding knife
9.6 Tri-folding
9.6.1 Drive
9.6.2 Tri-folding operation
9.7 Paper exit section
9.7.1 Drive
9.7.2 Paper exit
9.7.3 Paper transport belt
10. PK-523
10.1 Configuration
10.2 Drive
10.2.1 Punch shift section
10.2.2 Punch section
10.3 Operation
10.3.1 Punch standby position movement control
10.3.2 Punch position correction control
10.3.3 Punch control
10.3.4 Punch scraps box control
11. ZU-609
11.1 Configuration
11.2 Drive
11.2.1 1st folding
11.2.2 2nd folding/transport
11.3 Operation
11.3.1 1st folding mechanism
11.3.2 2nd folding mechanism
11.3.3 Double-folding mechanism
11.3.4 Transport roller pressure change
11.3.5 Z-fold pressure release mechanism
11.3.6 Z-fold paper detection
12. PI-507
12.1 Configuration
12.2 Drive
12.3 Operation
12.3.1 Tray lift mechanism
12.3.2 Pick-up mechanism
12.3.3 Separation mechanism
12.3.4 Path switching mechanism
12.3.5 Paper size detection control
12.3.6 Door open/close detection mechanism
13. JS-602
13.1 Configuration
13.2 Drive
13.3 Operation
13.3.1 Job tray transport mechanism
13.3.2 Door open/close detection mechanism

QL THEORY OF OPERATION AU-102/AU-201S
1. AU-102
1.1 Configuration
1.2 Operation
2. AU-201S
2.1 Configuration
2.2 Operation
2.3 Specifications

QM THEORY OF OPERATION EK-608/EK-609/SC-508
1. EK-608
1.1 Configuration
1.2 Operation
2. EK-609
2.1 Configuration
2.2 Operation
3. SC-508
3.1 Configuration
3.2 Operation

QN THEORY OF OPERATION UK-212/UK-215
1. CONFIGURATION
1.1 Mounting position
2. OPERATION
2.1 Outline
2.2 2nd network interface structure
2.2.1 Wired Only
2.2.2 Wireless Only
2.2.3 Wired+Wireless (Secondary Mode)
2.2.4 Wired+Wireless (Primary Mode)
2.2.5 Wired+Wireless (Wi-Fi Direct)
2.3 Operation on ErP Auto Power Off mode
2.3.1 Wired+Wireless (Secondary Mode)
2.3.2 Wired+Wireless (Primary Mode), Wired+Wireless (Wi-Fi Direct)
2.3.3 Setting for printer driver

QO THEORY OF OPERATION FK-514/FK-515/MK-742
1. COMMUNICATION CONTROL
1.1 FIF bits of DIS, DTC and DCS
1.1.1 FIF data configuration list (DIS/DTC)
1.1.2 FIF data configuration list (DCS)
1.2 Modem fallback sequence
1.2.1 V17, V29, and V27 ter
1.2.2 V34 fallback
1.3 V8/V34 sequence
1.3.1 V34
1.3.2 Sample of a signal procedure at sending two pages
1.3.3 Procedure details
1.3.4 Common signal bit definition
1.3.5 Phase 2 (Probing)
1.3.6 Phase 3
1.3.7 Re-synchronization procedure / Startup procedure
1.3.8 Other
2. FUNCTION
2.1 Telephone function
2.1.1 TEL/FAX switching
2.2 F-code
2.2.1 Signal format
2.2.2 F-code confidential transmission
2.2.3 F-code bulletin board polling
2.2.4 F-code relay transmission
2.3 Transmission function
2.3.1 Original scan mode
2.4 Reception function
2.4.1 Reduction / division of reception
2.4.2 Cassette / paper selection
2.4.3 Compulsory memory reception
2.4.4 Closed reception (Junk FAX)

QP THEORY OF OPERATION HD-524
1. CONFIGURATION
1.1 Outline
1.1.1 About RAID 1
1.2 Unit configuration
2. OPERATION
2.1 HDD master/slave automatic switching control
2.2 HDD failure detection control
2.2.1 A master drive error has occurred (CD013)
2.2.2 A slave drive error has occurred (CD014)
2.2.3 A master-slave drive error has occurred (CD015)
2.2.4 A master drive error has occurred during the HDD mirroring rebuilding (CD016)
2.2.5 A slave drive error occurred during the HDD mirroring rebuilding (CD017)
2.3 HDD mirroring rebuild
2.3.1 Example: When HDD (B) is installed and rebuilding is executed
2.3.2 Example: When an HDD (A) R/W error occurs and HDD is replaced
2.4 Format HDD

QQ THEORY OF OPERATION CU-101/MK-745
1. CONFIGURATION
2. OPERATION
2.1 Exhaust control
2.2 Filter configuration
2.3 Airflow
2.4 Operation timing

QR THEORY OF OPERATION CU-102
1. CONFIGURATION
2. OPERATION
2.1 Exhaust control
2.2 Filter configuration
2.3 Airflow
2.4 Operation timing

& Parts List Manual