Konica Minolta Bizhub C360 Bizhub C280 Bizhub C220 Field Service Manual

Field Service Manual Konica Minolta Bizhub C360 Bizhub C280 Bizhub C220;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Konica Minolta Bizhub.
You can print, zoom or read any diagram, picture or page from this Field Service Manual. Every chapter on this manual is fully detailed and contain all theĀ  simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Konica Minolta Bizhub C360 Bizhub C280 Bizhub C220 photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

BIZHUB C360/C280/C220 MAIN BODY
OUTLINE
1. SYSTEM CONFIGURATION
2. PRODUCT SPECIFICATIONS
2.1 TYPE
2.2 FUNCTIONS
2.3 PAPER
2.4 MATERIALS
2.5 PRINT VOLUME
2.6 MACHINE SPECIFICATIONS
2.7 OPERATING ENVIRONMENT
2.8 PRINT FUNCTIONS
2.9 SCAN FUNCTIONS
MAINTENANCE
3. PERIODICAL MIANTENANCE ITEMS
3.1 CONCEPT OF PERIODICAL MAINTENANCE
3.1.1 MAIN BODY
3.1.2 DF-617
3.1.3 PC-107/207/408
3.1.4 JS-505
3.1.5 JS-603/FS-527/SD-509/PK-517
3.1.6 FS-529
3.2 PERIODICAL REPLACEMENT PARTS LIST
3.2.1 MAIN BODY
3.2.2 OPTION
3.3 PERIODICAL CLEANING PARTS LIST
3.3.1 MAIN BODY
3.3.2 OPTION
3.4 CONCEPT OF PARTS LIFE
3.4.1 LIFE VALUE OF CONSUMABLES AND PARTS
3.4.2 CONDITIONS FOR LIFE SPECIFICATIONS VALUES
3.4.3 CONTROL CAUSING INHIBITED PRINTING FOR ONE PART WHEN AN INHIBITED-PRINTING
EVENT OCCURS IN ANOTHER PART
4. PERIODICAL MAINTENANCE PROCEDURE
4.1 HOUSING SECTION
4.1.1 REPLACING THE OZONE FILTER
4.2 PHOTO CONDUCTOR SECTION
4.2.1 REPLACING THE DRUM UNIT
4.3 CHARGING SECTION
4.3.1 CLEANING OF THE ELECTROSTATIC CHARGER WIRE
4.4 DEVELOPING SECTION
4.4.1 REPLACING THE DEVELOPING UNIT
4.5 TONER SUPPLY SECTION
4.5.1 REPLACING THE TONER CARTRIDGE
4.6 1ST TRANSFER SECTION
4.6.1 CLEANING OF THE IMAGE TRANSFER ENTRANCE GUIDE
4.6.2 CLEANING OF THE IDC REGISTRATION SENSOR/MK,YC
4.6.3 REPLACING THE TRANSFER BELT UNIT
4.7 2ND TRANSFER/SEPARATION SECTION
4.7.1 REPLACING THE TRANSFER ROLLER UNIT
4.8 TONER COLLECTION SECTION
4.8.1 REPLACING THE WASTE TONER BOX
4.8.2 CLEANING OF THE AREA AROUND THE WASTE TONER COLLECTING PORT
4.9 PAPER FEED SECTION
4.9.1 REPLACING THE TRAY 1 FEED ROLLER/TRAY 1 PICK-UP ROLLER
4.9.2 REPLACING THE TRAY 1 SEPARATION ROLLER ASSY
4.9.3 REPLACING THE TRAY 2 FEED ROLLER/TRAY 2 PICK-UP ROLLER
4.9.4 REPLACING THE TRAY 2 SEPARATION ROLLER ASSY
4.9.5 REPLACING THE MANUAL BYPASS TRAY FEED ROLLER
4.9.6 REPLACING THE MANUAL BYPASS TRAY SEPARATION ROLLER ASSY
4.10 REGISTRATION SECTION
4.10.1 CLEANING OF THE TIMING ROLLER
4.11 FUSING SECTION
4.11.1 REPLACING THE FUSING UNIT
4.12 DUPLEX SECTION
4.12.1 CLEANING OF THE DUPLEX TRANSPORT ROLLERS
5. OTHER MAINTENANCE ITEMS
5.1 DISASSEMBLY/ADJUSTMENT PROHIBITED ITEMS
5.1.1 CCD UNIT
5.1.2 PH UNIT
5.1.3 FUSING UNIT
5.2 NOTES WHEN TRANSPORTING THE MACHINE
5.2.1 PROTECTIVE MATERIALS
5.3 DISASSEMBLY/REASSEMBLY PARTS LIST
5.4 CLEANING PARTS LIST
5.5 DISASSEMBLY/REASSEMBLY PROCEDURE
5.5.1 FRONT DOOR
5.5.2 LEFT COVER
5.5.3 EXIT TRAY
5.5.4 REAR RIGHT COVER
5.5.5 UPPER RIGHT COVER
5.5.6 UPPER REAR COVER
5.5.7 LOWER REAR COVER/1
5.5.8 LOWER REAR COVER/2
5.5.9 SCANNER REAR COVER
5.5.10 SCANNER RIGHT COVER
5.5.11 SCANNER RIGHT FRONT COVER
5.5.12 USB INTERFACE COVER
5.5.13 SCANNER LEFT FRONT COVER
5.5.14 SCANNER UPPER FRONT COVER
5.5.15 SCANNER LEFT COVER
5.5.16 SCANNER UPPER REAR COVER
5.5.17 SCANNER FRONT COVER
5.5.18 SLIT GLASS COVER
5.5.19 ORIGINAL GLASS
5.5.20 CONTROL PANEL ASSY
5.5.21 TRAY 1
5.5.22 TRAY 2
5.5.23 FRONT SIDE RELAY BOARD COVER
5.5.24 FRONT COVER
5.5.25 TRAY 1 PAPER FEED UNIT
5.5.26 TRAY 2 PAPER FEED UNIT
5.5.27 PH UNIT
5.5.28 CCD BOARD UNIT
5.5.29 EXPOSURE UNIT
5.5.30 SUB HOPPER ASSY
5.5.31 RIGHT DOOR ASSY
5.5.32 MANUAL BYPASS TRAY UNIT
5.5.33 REGIST UNIT
5.5.34 CONVEYANCE UNIT
5.5.35 HARD DISK DRIVE (HDD)
5.5.36 HOW TO OPEN PWB BOX
5.5.37 MAIN DRIVE UNIT
5.5.38 FUSING DRIVE UNIT
5.5.39 HOPPER DRIVE UNIT (C/K, Y/M)
5.5.40 SCANNER RELAY BOARD (REYB/SCAN)
5.5.41 INVERTER BOARD (INVB)
5.5.42 MACHINE CONDITION MONITOR BOARD (MCMB)
5.5.43 FRONT SIDE RELAY BOARD (FREYB)
5.5.44 DC POWER SUPPLY (DCPU)
5.5.45 PH RELAY BOARD (PHREYB)
5.5.46 PRINTER CONTROL BOARD (PRCB)
5.5.47 SERVICE EEPROM BOARD (SVERB)
5.5.48 MFP BOARD (MFPB)
5.5.49 HIGH VOLTAGE UNIT (HV)
5.5.50 SODIMM (DIMM)
5.5.51 NVRAM BOARD (NRB)
5.5.52 PAPER FEED TRAY 1 PAPER FD SENSOR BOARD (PSDB/1)
5.5.53 PAPER FEED TRAY 2 PAPER FD SENSOR BOARD (PSDB/2)
5.5.54 PAPER FEED TRAY 1 LED BOARD, PAPER FEED TRAY 2 LED BOARD (LEDB1, LEDB2)

5.5.55 SCANNER MOTOR (M201)
5.5.56 DUPLEX TRANSPORT MOTOR (M5)
5.5.57 TONER SUPPLY MOTOR/YM, CK (M8, M9)
5.5.58 TRANSPORT MOTOR (M1)
5.5.59 COLOR PC MOTOR (M2)
5.5.60 FUSING MOTOR (M3)
5.5.61 SWITCHBACK MOTOR (M4)
5.5.62 FUSING PRESSURE ROLLER RETRACTION MOTOR (M11)
5.5.63 TONER CARTRIDGE MOTOR/YM (M6)
5.5.64 TONER CARTRIDGE MOTOR/CK (M7)
5.5.65 COLOR DEV. UNIT ENGAGED MOTOR (M10)
5.5.66 PAPER FEED TRAY 1 LIFT-UP MOTOR (M12)
5.5.67 PAPER FEED TRAY 2 LIFT-UP MOTOR (M13)
5.5.68 TRANSFER BELT CLEANER COOLING FAN MOTOR (FM6)
5.5.69 PAPER FEED TRAY 1 PAPER FEED CLUTCH (CL3)
5.5.70 PAPER FEED TRAY 2 VERTICAL TRANSPORT CLUTCH (CL2)
5.5.71 PAPER FEED TRAY 2 PAPER FEED CLUTCH (CL1)
5.5.72 MANUAL PAPER FEED CLUTCH (CL7)
5.5.73 DEVELOPING CLUTCH/K (CL6)
5.5.74 REGISTRATION ROLLER CLUTCH (CL4)
5.5.75 IDC REGISTRATION SENSOR SHUTTER SOLENOID (SD2)
5.5.76 IDC REGISTRATION SENSOR/MK, YC (IDCS/MK, YC) ASSY
5.5.77 PH WINDOW CLEANING PAD
5.5.78 SCANNER DRIVE CABLE
5.6 CLEANING PROCEDURE
5.6.1 TRANSFER BELT UNIT
5.6.2 PH WINDOW
5.6.3 TRAY 1 FEED ROLLER, TRAY 1 PICK-UP ROLLER, TRAY 1 SEPARATION ROLLER
5.6.4 TRAY 2 FEED ROLLER, TRAY 2 PICK-UP ROLLER, TRAY 2 SEPARATION ROLLER
5.6.5 TRAY 2 TRANSPORT ROLLER
5.6.6 MANUAL BYPASS TRAY FEED ROLLER
5.6.7 MANUAL BYPASS TRAY SEPARATION ROLLER
5.6.8 ORIGINAL GLASS
5.6.9 SCANNER RAILS
5.6.10 MIRRORS (1ST/2ND/3RD)
5.6.11 LENS
5.6.12 CCD SENSOR
6. SERVICE TOOL
6.1 SERVICE MATERIAL LIST
6.2 CE TOOL LIST
7. FIRMWARE REWRITING
7.1 OUTLINE
7.2 USB MEMORY
7.2.1 PREPARATION
7.2.2 PROCEDURE
7.2.3 ACTION WHEN DATA TRANSFER FAILS
7.3 UPDATING THE FIRMWARE WITH THE INTERNET ISW
7.3.1 OUTLINE
7.3.2 SERVICE ENVIRONMENT
7.3.3 PREPARATIONS FOR FIRMWARE REWRITING
7.3.4 FIRMWARE REWRITING FROM THE CONTROL PANEL
7.3.5 FIRMWARE REWRITING FROM THE CS REMOTE CARE
7.3.6 ERROR CODE LIST FOR THE INTERNET ISW
8. COMMERCIALLY AVAILABLE PARTS
8.1 INSTALLING THE KEY COUNTER
8.1.1 CONFIGURATION
8.1.2 PROCEDURE
8.2 INSTALLING THE ORIGINAL SIZE DETECTION 2 SENSOR (PS205)
8.2.1 PROCEDURE
ADJUSTMENT/SETTING
9. HOW TO USE THE ADJUSTMENT/SETTING SECTION
10. UTILITY
10.1 LIST OF UTILITY MODE
10.2 STARTING/EXITING
10.2.1 STARTING PROCEDURE
10.2.2 EXITING PROCEDURE
10.3 TOUCH PANEL ADJUSTMENT
10.4 ONE-TOUCH USER BOX REGISTRATION
10.4.1 CREATE ONE-TOUCH DESTINATION-ADDRESS BOOK (PUBLIC)/(PERSONAL)
10.4.2 CREATE ONE-TOUCH DESTINATION-GROUP
10.4.3 CREATE ONE-TOUCH DESTINATION-E-MAIL SETTINGS
10.4.4 CREATE USER BOX
10.4.5 CREATE USER BOX-PUBLIC/PERSONAL USER BOX
10.4.6 CREATE USER BOX-BULLETIN BOARD USER BOX
10.4.7 CREATE USER BOX-RELAY USER BOX
10.4.8 LIMITING ACCESS TO DESTINATIONS
10.4.9 LIMITING ACCESS TO DESTINATIONS-APPLY LEVELS/GROUPS TO DESTINATIONS
10.5 USER SETTINGS
10.5.1 SYSTEM SETTINGS-LANGUAGE SELECTION
10.5.2 SYSTEM SETTINGS-MEASUREMENT UNIT SETTINGS
10.5.3 SYSTEM SETTINGS-PAPER TRAY SETTINGS
10.5.4 SYSTEM SETTINGS-AUTO COLOR LEVEL ADJUST
10.5.5 SYSTEM SETTINGS-POWER SAVE SETTINGS
10.5.6 SYSTEM SETTINGS-OUTPUT SETTINGS
10.5.7 SYSTEM SETTINGS-AE LEVEL ADJUSTMENT
10.5.8 SYSTEM SETTINGS-AUTO PAPER SELECT FOR SMALL ORIGINAL
10.5.9 SYSTEM SETTINGS-BLANK PAGE PRINT SETTINGS
10.5.10 SYSTEM SETTINGS-PAGE NUMBER PRINT POSITION
10.5.11 SYSTEM SETTINGS-SELECT KEYBOARD
10.5.12 CUSTOM DISPLAY SETTINGS-COPIER SETTINGS
10.5.13 CUSTOM DISPLAY SETTINGS-SCAN/FAX SETTINGS
10.5.14 CUSTOM DISPLAY SETTINGS-USER BOX SETTINGS
10.5.15 CUSTOM DISPLAY SETTINGS-COPY SCREEN
10.5.16 CUSTOM DISPLAY SETTINGS-FAX ACTIVE SCREEN
10.5.17 CUSTOM DISPLAY SETTINGS-COLOR SELECTION SETTINGS
10.5.18 CUSTOM DISPLAY SETTINGS-LEFT PANEL DISPLAY DEFAULT
10.5.19 CUSTOM DISPLAY SETTINGS-SEARCH OPTION SETTINGS
10.5.20 COPIER SETTINGS-AUTO BOOKLET ON WHEN FOLD & STAPLE
10.5.21 COPIER SETTINGS-AUTO ZOOM FOR COMBINE/BOOKLET
10.5.22 COPIER SETTINGS-AUTO SORT/GROUP SELECTION
10.5.23 COPIER SETTINGS-DEFAULT COPY SETTINGS
10.5.24 COPIER SETTINGS-DEFAULT ENLARGE DISPLAY SETTINGS
10.5.25 COPIER SETTINGS-WHEN AMS DIRECTION IS INCORRECT
10.5.26 COPIER SETTINGS-SEPARATE SCAN OUTPUT METHOD
10.5.27 COPIER SETTINGS-ENLARGEMENT ROTATION
10.5.28 COPIER SETTINGS-AUTO ZOOM (PLATEN)
10.5.29 COPIER SETTINGS-AUTO ZOOM (ADF)
10.5.30 COPIER SETTINGS-SPECIFY DEFAULT TRAY WHEN APS OFF
10.5.31 COPIER SETTINGS-SELECT TRAY FOR INSERT SHEET
10.5.32 COPIER SETTINGS-PRINT JOBS DURING COPY OPERATION
10.5.33 COPIER SETTINGS-AUTOMATIC IMAGE ROTATION
10.5.34 COPIER SETTINGS-FINISHING PROGRAM
10.5.35 COPIER SETTINGS-CARD SHOT SETTINGS
10.5.36 SCAN/FAX SETTINGS-JPEG COMPRESSION LEVEL
10.5.37 SCAN/FAX SETTINGS-BLACK COMPRESSION LEVEL
10.5.38 SCAN/FAX SETTINGS-TWAIN LOCK TIME
10.5.39 SCAN/FAX SETTINGS-DEFAULT SCAN/FAX SETTINGS
10.5.40 SCAN/FAX SETTINGS-DEFAULT ENLARGE DISPLAY SETTINGS
10.5.41 SCAN/FAX SETTINGS-COMPACT PDF/XPS COMPRESSION LEVEL
10.5.42 SCAN/FAX SETTINGS-COLOR TIFF TYPE
10.5.43 SCAN/FAX SETTINGS-OCR OPERATION SETTING
10.5.44 SCAN/FAX SETTINGS-GRAPHIC OUTLINING
10.5.45 PRINTER SETTINGS-BASIC SETTINGS
10.5.46 PRINTER SETTINGS-PAPER SETTING
10.5.47 PRINTER SETTINGS-PCL SETTINGS
10.5.48 PRINTER SETTINGS-PS SETTING
10.5.49 PRINTER SETTINGS-XPS SETTINGS
10.5.50 PRINTER SETTINGS-PRINT REPORTS
10.5.51 PRINTER SETTINGS-TIFF IMAGE PAPER SETTING
10.5.52 CHANGE PASSWORD
10.5.53 CHANGE E-MAIL ADDRESS
10.5.54 CHANGE ICON
10.5.55 REGISTER AUTHENTICATION SETTINGS
10.5.56 REGISTERED APPLICATION SETTING-DEFAULT APPLICATION SELECTION
10.5.57 CELLULAR PHONE/PDA SETTING-LINK FILE ERROR NOTIFICATION
10.5.58 CELLULAR PHONE/PDA SETTING-PROXY SERVER USE
10.5.59 CELLULAR PHONE/PDA SETTING-PRINT SETTINGS
10.6 ADMINISTRATOR SETTINGS
10.6.1 SYSTEM SETTINGS-POWER SAVE SETTINGS
10.6.2 SYSTEM SETTINGS-OUTPUT SETTINGS
10.6.3 SYSTEM SETTINGS-DATE/TIME SETTINGS
10.6.4 SYSTEM SETTINGS-DAYLIGHT SAVING TIME
10.6.5 SYSTEM SETTINGS-WEEKLY TIMER SETTINGS
10.6.6 SYSTEM SETTINGS-RESTRICT USER ACCESS
10.6.7 SYSTEM SETTINGS-EXPERT ADJUSTMENT
10.6.8 SYSTEM SETTINGS-LIST/COUNTER
10.6.9 SYSTEM SETTINGS-RESET SETTINGS
10.6.10 SYSTEM SETTINGS-USER BOX SETTINGS
10.6.11 SYSTEM SETTINGS-STANDARD SIZE SETTING
10.6.12 SYSTEM SETTINGS-STAMP SETTINGS
10.6.13 SYSTEM SETTINGS-BLANK PAGE PRINT SETTINGS
10.6.14 SYSTEM SETTINGS-APPLICATION KEY SETTINGS
10.6.15 SYSTEM SETTINGS-SKIP JOB OPERATION SETTINGS
10.6.16 SYSTEM SETTINGS-DEFAULT BYPASS PAPER TYPE SETTING
10.6.17 SYSTEM SETTINGS-PAGE NUMBER PRINT POSITION
10.6.18 SYSTEM SETTINGS-ADVANCED PREVIEW SETTING
10.6.19 ADMINISTRATOR/MACHINE SETTINGS-ADMINISTRATOR REGISTRATION
10.6.20 ADMINISTRATOR/MACHINE SETTINGS-INPUT MACHINE ADDRESS
10.6.21 ONE-TOUCH/USER BOX REGISTRATION-CREATE ONE-TOUCH DESTINATION
10.6.22 ONE-TOUCH/USER BOX REGISTRATION-CREATE USER BOX
10.6.23 ONE-TOUCH/USER BOX REGISTRATION-ONE-TOUCH/USER BOX REGISTRATION LIST 257
10.6.24 ONE-TOUCH/USER BOX REGISTRATION-MAXIMUM NUMBER OF USER BOXES
10.6.25 USER AUTHENTICATION/ACCOUNT TRACK-GENERAL SETTINGS
10.6.26 USER AUTHENTICATION/ACCOUNT TRACK-USER AUTHENTICATION SETTING
10.6.27 USER AUTHENTICATION/ACCOUNT TRACK-ACCOUNT TRACK SETTING
10.6.28 USER AUTHENTICATION/ACCOUNT TRACK-PRINT WITHOUT AUTHENTICATION
10.6.29 USER AUTHENTICATION/ACCOUNT TRACK-PRINT COUNTER LIST
10.6.30 USER AUTHENTICATION/ACCOUNT TRACK-EXTERNAL SERVER SETTINGS
10.6.31 USER AUTHENTICATION/ACCOUNT TRACK-LIMITING ACCESS TO DESTINATIONS
10.6.32 USER AUTHENTICATION/ACCOUNT TRACK-AUTHENTICATION DEVICE SETTINGS
10.6.33 USER AUTHENTICATION/ACCOUNT TRACK-AUTH/ACCT TRACK COMMON SETTING
10.6.34 USER AUTHENTICATION/ACCOUNT TRACK-SCAN TO HOME SETTINGS
10.6.35 USER AUTHENTICATION/ACCOUNT TRACK-SCAN TO AUTHORIZED FOLDER SETTINGS
10.6.36 NETWORK SETTINGS-TCP/IP SETTINGS
10.6.37 NETWORK SETTING-NETWARE SETTINGS
10.6.38 NETWORK SETTINGS-HTTP SERVER SETTINGS
10.6.39 NETWORK SETTINGS-FTP SETTINGS
10.6.40 NETWORK SETTINGS-SMB SETTING
10.6.41 NETWORK SETTINGS-LDAP SETTINGS
10.6.42 NETWORK SETTINGS-E-MAIL SETTINGS
10.6.43 NETWORK SETTINGS-SNMP SETTING
10.6.44 NETWORK SETTINGS-APPLETALK SETTINGS
10.6.45 NETWORK SETTINGS-BONJOUR SETTING
10.6.46 NETWORK SETTINGS-TCP SOCKET SETTINGS
10.6.47 NETWORK SETTINGS-NETWORK FAX SETTING
10.6.48 NETWORK SETTINGS-WEBDAV SETTINGS
10.6.49 NETWORK SETTINGS-WEB SERVICE SETTINGS
10.6.50 NETWORK SETTINGS-SSDP SETTINGS
10.6.51 NETWORK SETTINGS-DETAIL SETTINGS
10.6.52 NETWORK SETTINGS-IEEE802.1X AUTHENTICATION SETTINGS
10.6.53 NETWORK SETTINGS-WEB BROWSER SETTING
10.6.54 NETWORK SETTINGS-BLUETOOTH SETTING
10.6.55 COPIER SETTINGS-AUTO ZOOM (PLATEN)
10.6.56 COPIER SETTINGS-AUTO ZOOM (ADF)
10.6.57 COPIER SETTINGS-SPECIFY DEFAULT TRAY WHEN APS OFF
10.6.58 COPIER SETTINGS-SELECT TRAY FOR INSERT SHEET
10.6.59 COPIER SETTINGS-PRINT JOBS DURING COPY OPERATION
10.6.60 COPIER SETTINGS-AUTOMATIC IMAGE ROTATION
10.6.61 COPIER SETTINGS-CARD SHOT SETTINGS
10.6.62 PRINTER SETTINGS-USB TIMEOUT
10.6.63 PRINTER SETTINGS-NETWORK TIMEOUT
10.6.64 PRINTER SETTINGS-PRINT XPS ERRORS
10.6.65 PRINTER SETTINGS-PSWC DIRECT PRINT
10.6.66 FAX SETTINGS
10.6.67 FAX SETTINGS-HEADER INFORMATION
10.6.68 FAX SETTINGS-HEADER/FOOTER POSITION
10.6.69 FAX SETTINGS-LINE PARAMETER SETTING
10.6.70 FAX SETTINGS-TX/RX SETTINGS
10.6.71 FAX SETTINGS-FUNCTION SETTINGS
10.6.72 FAX SETTINGS-PBX CONNECTION SETTING
10.6.73 FAX SETTINGS-REPORT SETTINGS
10.6.74 FAX SETTINGS-JOB SETTINGS LIST
10.6.75 FAX SETTINGS-MULTI LINES SETTINGS
10.6.76 FAX SETTINGS-NETWORK FAX SETTINGS
10.6.77 SYSTEM CONNECTION-OPENAPI SETTINGS
10.6.78 SYSTEM CONNECTION-CALL REMOTE CENTER
10.6.79 SYSTEM CONNECTION-AUTOMATIC PREFIX/SUFFIX SETTING
10.6.80 SYSTEM CONNECTION-PRINTER INFORMATION
10.6.81 SYSTEM CONNECTION-CELLULAR PHONE/PDA SETTING
10.6.82 SECURITY SETTINGS-ADMINISTRATOR PASSWORD
10.6.83 SECURITY SETTINGS-USER BOX ADMIN. SETTING
10.6.84 SECURITY SETTINGS-ADMINISTRATOR SECURITY LEVELS
10.6.85 SECURITY SETTINGS-SECURITY DETAILS
10.6.86 SECURITY SETTINGS-ENHANCED SECURITY MODE
10.6.87 SECURITY SETTINGS-HDD SETTINGS
10.6.88 SECURITY SETTINGS-FUNCTION MANAGEMENT SETTING
10.6.89 SECURITY SETTINGS-STAMP SETTINGS
10.6.90 SECURITY SETTINGS-IMAGE LOG TRANSFER SETTINGS
10.6.91 SECURITY SETTINGS-DRIVER PASSWORD ENCRYPTION SETTING
10.6.92 LICENSE SETTINGS-GET REQUEST CODE
10.6.93 LICENSE SETTINGS-INSTALL LICENSE
10.6.94 LICENSE SETTINGS-LIST OF ENABLED FUNCTIONS
10.6.95 OPENAPI AUTHENTICATION MANAGEMENT-RESTRICTION CODE SETTING
10.7 BANNER PRINTING
10.8 MY PANEL SETTINGS
10.9 DEVICE INFORMATION
11. ADJUSTMENT ITEM LIST
12. SERVICE MODE
12.1 LIST OF SERVICE MODE
12.2 STARTING/EXITING
12.2.1 STARTING PROCEDURE
12.3 DATE/TIME INPUT MODE
12.4 MACHINE
12.4.1 FUSING TEMPERATURE
12.4.2 FUSING TRANSPORT SPEED
12.4.3 ORG. SIZE DETECTING SENSOR ADJ
12.4.4 PRINTER AREA-LEADING EDGE ADJUSTMENT
12.4.5 PRINTER AREA-CENTERING
12.4.6 PRINTER AREA-LEADING EDGE ADJ. (DUPLEX SIDE 2)
12.4.7 PRINTER AREA-CENTERING (DUPLEX 2ND SIDE)
12.4.8 PRINTER AREA-PAPER FEED DIRECTION ADJ
12.4.9 TRAY PRINTING POSITION: TIP
12.4.10 SCAN AREA
12.4.11 SCAN AREA-IMAGE POSITION: LEADING EDGE
12.4.12 SCAN AREA-IMAGE POSITION: SIDE EDGE
12.4.13 SCAN AREA-CROSS DIRECTION ADJUSTMENT
12.4.14 SCAN AREA-FEED DIRECTION ADJUSTMENT
12.4.15 PRINTER RESIST LOOP
12.4.16 COLOR REGISTRATION ADJUSTMENT-CYAN, MAGENTA, YELLOW
12.4.17 EXHAUST FAN STOP DELAY
12.4.18 SKEW ADJUSTMENT-SKEW ADJUSTMENT
12.4.19 SKEW ADJUSTMENT-SKEW ADJUSTMENT RESET
12.4.20 MANUAL BYPASS TRAY ADJUSTMENT
12.4.21 LEAD EDGE ERASE ADJUSTMENT
12.4.22 SPLIT LINE PRIOR DETECTION
12.4.23 NON-IMAGE AREA ERASE CHECK
12.5 FIRMWARE VERSION
12.6 IMAGING PROCESS ADJUSTMENT
12.6.1 GRADATION ADJUST
12.6.2 D MAX DENSITY
12.6.3 BACKGROUND VOLTAGE MARGIN
12.6.4 TRANSFER OUTPUT FINE ADJUSTMENT-PRIMARY TRANSFER ADJ
12.6.5 TRANSFER OUTPUT FINE ADJUSTMENT-SECONDARY TRANSFER ADJ
12.6.6 STABILIZER-STABILIZATION ONLY
12.6.7 STABILIZER-INITIALIZE+IMAGE STABILIZATION
12.6.8 THICK PAPER DENSITY ADJUSTMENT
12.6.9 PAPER SEPARATION ADJUSTMENT
12.6.10 TCR TONER SUPPLY
12.6.11 MONOCHROME DENSITY ADJUSTMENT
12.6.12 DEVELOPMENT AC VOLTAGE CHOICE
12.7 CS REMOTE CARE
12.7.1 OUTLINES
12.7.2 SETTING UP THE CS REMOTE CARE
12.7.3 SOFTWARE SW SETTING FOR CS REMOTE CARE
12.7.4 SETUP CONFIRMATION
12.7.5 CALLING THE MAINTENANCE
12.7.6 CALLING THE CENTER FROM THE ADMINISTRATOR
12.7.7 CHECKING THE TRANSMISSION LOG
12.7.8 DETAIL ON SETTINGS
12.7.9 LIST OF THE CS REMOTE CARE ERROR CODE
12.7.10 TROUBLESHOOTING FOR CS REMOTE CARE
12.7.11 CS REMOTE CARE OPERATION UNDER ENHANCED SECURITY MODE
12.8 SYSTEM 1
12.8.1 MARKETING AREA
12.8.2 TEL/FAX NUMBER
12.8.3 SERIAL NUMBER
12.8.4 NO SLEEP
12.8.5 FOOLSCAP SIZE SETTING
12.8.6 ORIGINAL SIZE DETECTION
12.8.7 INSTALL DATE
12.8.8 INITIALIZATION-CLEAR ALL DATA
12.8.9 INITIALIZATION-CLEAR INDIVIDUAL DATA
12.8.10 INITIALIZATION-SYSTEM ERROR CLEAR
12.8.11 TROUBLE ISOLATION
12.8.12 POST CARD TRANSFER TABLE
12.8.13 CHANGE WARM UP TIME
12.8.14 MACHINE STATE LED SETTING
12.9 SYSTEM 2
12.9.1 HDD
12.9.2 IMAGE CONTROLLER SETTING
12.9.3 OPTION BOARD STATUS
12.9.4 CONSUMABLE LIFE REMINDER
12.9.5 UNIT CHANGE
12.9.6 SOFTWARE SWITCH SETTING
12.9.7 SOFTWARE SWITCH SETTING-SETTING ITEMS IN THE SOFTWARE SWITCH SETTING
12.9.8 SCAN CARIBRATION
12.9.9 LCT PAPER SIZE SETTING
12.9.10 LINE MAG SETTING
12.9.11 DATA CAPTURE
12.9.12 SPLIT LINE DETECT. SETTING-PRIOR DETECTION
12.9.13 SPLIT LINE DETECT. SETTING-WARNING LEVEL
12.9.14 SPLIT LINE DETECT. SETTING-FEED CLEANING SETTING
12.9.15 STAMP
12.9.16 NETWORK FAX SETTINGS
12.9.17 IMAGE STABILIZATION SETTING
12.9.18 USER PAPER SETTINGS
12.9.19 COVERAGE RATE SCREEN
12.9.20 JAM CODE DISPLAY SETTING
12.9.21 BOOTUP SCREEN
12.9.22 INSTALL DATA
12.9.23 BLUETOOTH SETTINGS
12.10 COUNTER
12.10.1 COMMON PROCEDURE
12.10.2 LIFE
12.10.3 SERVICE CALL COUNTER
12.10.4 SECTION SERVICE CALL
12.10.5 WARNING
12.10.6 MAINTENANCE
12.10.7 SERVICE TOTAL
12.10.8 COUNTER OF EACH MODE
12.10.9 SERVICE CALL HISTORY (DATA)
12.10.10 ADF PAPER PAGES
12.10.11 PAPER JAM HISTORY
12.10.12 FAX CONNECTION ERROR
12.10.13 SPLIT LINE COUNTER
12.10.14 PARTS COUNTER (FIXED)
12.10.15 JAM
12.10.16 SECTION JAM
12.11 LIST OUTPUT
12.11.1 MACHINE MANAGEMENT LIST
12.11.2 ADJUSTMENT LIST
12.11.3 PARAMETER LIST
12.11.4 SERVICE PARAMETER
12.11.5 PROTOCOL TRACE
12.11.6 FAX SETTING LIST
12.11.7 FAX ANALYSIS LIST
12.12 STATE CONFIRMATION
12.12.1 SENSOR CHECK
12.12.2 SENSOR CHECK SCREENS
12.12.3 SENSOR CHECK LIST
12.12.4 TABLE NUMBER
12.12.5 LEVEL HISTORY1
12.12.6 LEVEL HISTORY 2
12.12.7 TEMP. & HUMIDITY
12.12.8 CCD CHECK
12.12.9 MEMORY/HDD ADJ.-MEMORY CHECK
12.12.10 MEMORY/HDD ADJ.-COMPRESS / DECOMPRESSION CHECK
12.12.11 MEMORY/HDD ADJ.-MEMORY BUS CHECK
12.12.12 MEMORY/HDD ADJ.-DSC BUS CHECK
12.12.13 MEMORY/HDD ADJ.-HDD R/W CHECK
12.12.14 MEMORY/HDD ADJ.-HDD FORMAT
12.12.15 MEMORY/HDD STATE
12.12.16 COLOR REGIST
12.12.17 ADJUSTMENT DATA LIST
12.13 TEST MODE
12.13.1 PROCEDURE FOR TEST PATTERN OUTPUT
12.13.2 GRADATION PATTERN
12.13.3 HALFTONE PATTERN
12.13.4 LATTICE PATTERN
12.13.5 SOLID PATTERN
12.13.6 COLOR SAMPLE
12.13.7 8 COLOR SOLID PATTERN
12.13.8 CMM PATTERN
12.13.9 RUNNING MODE
12.13.10 FAX TEST
12.14 ADF
12.14.1 ORIGINAL STOP POSITION
12.14.2 REGISTRATION LOOP ADJ
12.14.3 AUTO STOP POSITION ADJUSTMENT
12.14.4 PAPER PASSAGE
12.14.5 SENSOR CHECK
12.14.6 ORIGINAL TRAY WIDTH
12.14.7 READ POS ADJ
12.14.8 FEED ZOOM
12.14.9 SCANNING LIGHT ADJUSTMENT
12.14.10 MIXED ORIGINAL SIZE ADJUSTMENT
12.15 FAX
12.16 FINISHER
12.16.1 FS-FN ADJUSTMENT – CENTER STAPLE POSITION
12.16.2 FS-FN ADJUSTMENT – HALF-FOLD POSITION
12.16.3 FS-FN ADJUSTMENT – PUNCH HORIZONTAL POSITION
12.16.4 FS-FN ADJUSTMENT – PUNCH REGIST LOOP SIZE
12.16.5 FS-FN ADJUSTMENT – FINISHER CHECK
12.16.6 FS-FN ADJUSTMENT – LOAD DATA
12.16.7 FS-FN ADJUSTMENT – ALIGNMENT PLATE POSITION
12.16.8 FS-FN ADJUSTMENT – SIDE POSITION ADJUSTMENT
12.16.9 PUNCH OPTION SETTING
12.16.10 JOB SEPARATOR
12.17 INTERNET ISW
12.17.1 INTERNET ISW SET
12.17.2 HTTP SETTING
12.17.3 HTTP SETTING-DATA INPUT SETTING
12.17.4 HTTP SETTING-CONNECT PROXY
12.17.5 HTTP SETTING-PROXY SERVER
12.17.6 HTTP SETTING-PROXY AUTHENTICATION
12.17.7 HTTP SETTING-CONNECTION TIME-OUT
12.17.8 FTP SETTING
12.17.9 FTP SETTING-DATA INPUT SETTING
12.17.10 FTP SETTING-CONNECT PROXY
12.17.11 FTP SETTING-PROXY SERVER
12.17.12 FTP SETTING-CONNECTION SETTING
12.17.13 FORWARDING ACCESS SETTING-USER ID
12.17.14 FORWARDING ACCESS SETTING-PASSWORD
12.17.15 FORWARDING ACCESS SETTING-URL
12.17.16 FORWARDING ACCESS SETTING-FILENAME
12.17.17 DOWNLOAD
13. ENHANCED SECURITY
13.1 LIST OF ENHANCED SECURITY
13.2 STARTING/EXITING
13.2.1 STARTING PROCEDURE
13.2.2 EXITING PROCEDURE
13.3 ENHANCED SECURITY
13.3.1 CE PASSWORD
13.3.2 ADMINISTRATOR PASSWORD
13.3.3 ADMINISTRATOR FEATURE LEVEL
13.3.4 CE AUTHENTICATION
13.3.5 DC/DEVC LIFESTOP
13.3.6 NVRAM DATA BACKUP
13.3.7 OPERATION BAN RELEASE TIME
13.3.8 ADMINISTRATOR UNLOCKING
13.3.9 ENGINE FW DIPSW
14. BILLING SETTING
14.1 LIST OF BILLING SETTING
14.2 STARTING/EXITING
14.2.1 STARTING PROCEDURE
14.2.2 EXITING PROCEDURE
14.3 BILLING SETTING
14.3.1 COUNTER SETTING
14.3.2 MANAGEMENT FUNCTION CHOICE
14.3.3 MANAGEMENT FUNCTION CHOICE-KEY COUNTER IF VENDOR
14.3.4 MANAGEMENT FUNCTION CHOICE-AUTHENTICATION DEVICE 1
14.3.5 MANAGEMENT FUNCTION CHOICE-AUTHENTICATION DEVICE 2
14.3.6 MANAGEMENT FUNCTION CHOICE-KEY COUNTER ONLY
14.3.7 MANAGEMENT FUNCTION CHOICE-MANAGEMENT DEVICE 1
14.3.8 MANAGEMENT FUNCTION CHOICE-MANAGEMENT DEVICE 2
14.3.9 MANAGEMENT FUNCTION CHOICE-VENDOR 1
14.3.10 MANAGEMENT FUNCTION CHOICE-VENDOR 2
14.3.11 COVERAGE RATE CLEAR
14.3.12 OPENAPI AUTHENTICATION MANAGEMENT-RESTRICTION CODE
14.3.13 OPENAPI AUTHENTICATION MANAGEMENT-REGION CODE
15. CONTENTS TO BE CLEARED BY RESET FUNCTION
16. MECHANICAL ADJUSTMENT
16.1 MECHANICAL ADJUSTMENT OF THE SCANNER SECTION
16.1.1 ADJUSTMENT OF THE SCANNER MOTOR BELT
16.1.2 POSITIONING OF THE EXPOSURE UNIT AND MIRRORS UNIT
16.2 MECHANICAL ADJUSTMENT OF THE PAPER FEED SECTION
16.2.1 SKEW ADJUSTMENT OF THE TRAY 1/2
16.2.2 CENTERING ADJUSTMENT OF THE TRAY 1/2
16.2.3 ADJUSTMENT OF THE BYPASS PAPER SIZE UNIT
TROUBLESHOOTING
17. JAM DISPLAY
17.1 LIST OF JAM CODE
17.1.1 MISFEED DISPLAY RESETTING PROCEDURE
17.2 SENSOR LAYOUT
17.2.1 MAIN BODY
17.2.2 DF-617
17.2.3 PC-107/PC-207
17.2.4 PC-408
17.2.5 JS-505
17.2.6 FS-529
17.2.7 FS-527/SD-509/PK-517/JS-603
17.3 SOLUTION
17.3.1 INITIAL CHECK ITEMS
17.3.2 MISFEED AT MANUAL BYPASS FEED SECTION
17.3.3 MISFEED AT TRAY 1 FEED SECTION
17.3.4 MISFEED AT TRAY 2 FEED SECTION
17.3.5 TRAY3 FEED SECTION/VERTICAL TRANSPORT SECTION MISFEED
17.3.6 TRAY4 FEED SECTION/VERTICAL TRANSPORT SECTION MISFEED
17.3.7 LCT PAPER FEED SECTION/VERTICAL TRANSPORT SECTION MISFEED
17.3.8 MISFEED AT VERTICAL TRANSPORT SECTION
17.3.9 MISFEED AT 2ND IMAGE TRANSFER SECTION
17.3.10 MISFEED AT EXIT SECTION
17.3.11 ADF TURNOVER SECTION
17.3.12 ADF PAPER FEED SECTION
17.3.13 ADF TRANSPORT SECTION
17.3.14 ADF PAPER EXIT SECTION
17.3.15 ADF IMAGE READING SECTION
17.3.16 CODE: 72-14
17.3.17 CODE: 72-15
17.3.18 CODE: 72-16
17.3.19 CODE: 72-17
17.3.20 CODE: 72-18
17.3.21 CODE: 72-19
17.3.22 CODE: 72-21
17.3.23 CODE: 72-22
17.3.24 CODE: 72-26
17.3.25 CODE: 72-43
17.3.26 CODE: 72-81
17.3.27 CODE: 72-85
17.3.28 CODE: 72-86
17.3.29 CODE: 72-87
17.3.30 MISFEED AT DUPLEX PRE-REGISTRATION SECTION
17.3.31 MISFEED AT DUPLEX TRANSPORT SECTION
18. MALFUNCTION CODE
18.1 DISPLAY PROCEDURE
18.2 LIST
18.3 SOLUTION
18.3.1 S-1: CCD GAIN ADJUSTMENT FAILURE
18.3.2 D-1: SPLIT LINE DETECT
18.3.3 P-5: IDC SENSOR (FRONT) FAILURE
18.3.4 P-28 IDC SENSOR (REAR) FAILURE
18.3.5 P-6: DRUM/DEVELOPMENT UNIT (C) FAILURE
18.3.6 P-7: DRUM/DEVELOPMENT UNIT (M) FAILURE
18.3.7 P-8: DRUM/DEVELOPMENT UNIT (Y) FAILURE
18.3.8 P-9: DRUM/DEVELOPMENT UNIT (K) FAILURE
18.3.9 P-14: SKEW CORRECTION TROUBLE
18.3.10 P-21: COLOR REGIST TEST PATTERN FAILURE
18.3.11 P-22: COLOR REGIST ADJUST FAILURE
18.3.12 P-27: SECONDARY TRANSFER ATVC FAILURE
18.3.13 P-30: PC HOME SENSOR (COLOR) MALFUNCTION
18.3.14 P-31: PC HOME SENSOR (K) MALFUNCTION
19. TROUBLE CODE
19.1 DISPLAY PROCEDURE
19.2 TROUBLE RESETTING PROCEDURE
19.2.1 TROUBLE RESETTING PROCEDURE BY TROUBLE RESET KEY
19.3 TROUBLE ISOLATION FUNCTION
19.4 LIST
19.5 SOLUTION
19.5.1 C0001: LCT COMMUNICATION ERROR
19.5.2 C0202: TRAY 1 FEEDER UP/DOWN ABNORMALITY
19.5.3 C0204: TRAY 2 FEEDER UP/DOWN ABNORMALITY
19.5.4 C0206: TRAY3 LIFT-UP FAILURE
19.5.5 C0208: TRAY4 LIFT-UP FAILURE
19.5.6 C0209: LCT ELEVATOR MOTOR FAILURE
19.5.7 C0210: LCT LIFT FAILURE
19.5.8 C0211: MANUAL FEED UP/DOWN ABNORMALITY
19.5.9 C0212: LCT LOCK RELEASE FAILURE
19.5.10 C0213: LCT SHIFT GATE OPERATION FAILURE
19.5.11 C0214: LCT SHIFT FAILURE
19.5.12 C0215: LCT SHIFT MOTOR FAILURE
19.5.13 C1004: FNS COMMUNICATION ERROR
19.5.14 C1081: SD COMMUNICATION ERROR
19.5.15 C1113: CENTER-STAPLE LEAD EDGE STOPPER MOTOR MALFUNCTION
19.5.16 C1114: CENTER-STAPLE FRONT ADJUST DRIVE MOTOR MALFUNCTION
19.5.17 C1115: CENTER-STAPLE KNIFE DRIVE MOTOR MALFUNCTION
19.5.18 C1116: CENTER-STAPLE TRANSFER MOTOR MALFUNCTION
19.5.19 C1150: CENTER-STAPLE REAR ADJUST DRIVE MOTOR MALFUNCTION
19.5.20 C1156: CENTER-STAPLE PADDLE ROLLER MOTOR MALFUNCTION (TRAILING EDGE)
19.5.21 C1181: MALFUNCTIONING OF BELT UP/DOWN MOVEMENT
19.5.22 C1182: SHIFT MOTOR DRIVE MALFUNCTION
19.5.23 C1183: ELEVATE DRIVE MALFUNCTION
19.5.24 C1190: ALIGNMENT PLATE MOTOR DRIVE MALFUNCTION / ALIGNMENT PLATE R DRIVE
MALFUNCTION
19.5.25 C1191: ALIGNMENT PLATE F DRIVE MALFUNCTION
19.5.26 C1194: LEADING EDGE STOPPER MOTOR DRIVE MALFUNCTION
19.5.27 C11A1: TRAY 2 EXIT ROLLER PRESSURE/ RETRACTION MALFUNCTION /
EXIT ROLLER PRESSURE/ RETRACTION MALFUNCTION
19.5.28 C11A2: ACCOMMODATION ROLLER PRESSURE/ RETRACTION MALFUNCTION
19.5.29 C11A7: TRAY 3 EXIT ROLLER PRESSURE/ RETRACTION MALFUNCTION
19.5.30 C11B0: STAPLER MOVEMENT DRIVE MALFUNCTION
19.5.31 C11B2: STAPLE DRIVE MALFUNCTION
19.5.32 C11B5: SADDLE STAPLER DRIVE MALFUNCTION
19.5.33 C11C0: PUNCH MOTOR DRIVE MALFUNCTION
19.5.34 C11E0: DUPLEX PATH SWITCHING MOTOR DRIVE MALFUNCTION /
FINISHER ROUTE CHANGE MALFUNCTION
19.5.35 C11E1: UPPER LOWER PATH SWITCHING MOTOR DRIVE MALFUNCTION
19.5.36 C11E2: TRAY1 PATH SWITCHING MOTOR DRIVE MALFUNCTION
19.5.37 C1301: FAN MOTOR DRIVE MALFUNCTION
19.5.38 C1402: FS NVRAM MEMORY ERROR
19.5.39 C2152: TRANSFER BELT PRESSURE WELDING ALIENATION
19.5.40 C2164: PC CHARGE MALFUNCTION
19.5.41 C2253: COLOR PC DRUM MOTORS FAILURE TO TURN
19.5.42 C2254: COLOR PC DRUM MOTORS TURNING AT ABNORMAL TIMING
19.5.43 C225D: COLOR DEVELOPING UNIT DE-ENGAGEMENT FAILURE
19.5.44 C2355: TRANSFER BELT CLEANER COOLING FAN MOTORS FAILURE TO TURN
19.5.45 C2411: DEVELOPING UNIT (C) NEW ARTICLE RELEASE
19.5.46 C2412: DEVELOPING UNIT (M) NEW ARTICLE RELEASE
19.5.47 C2413: DEVELOPING UNIT (Y) NEW ARTICLE RELEASE
19.5.48 C2414: DEVELOPING UNIT (K) NEW ARTICLE RELEASE
19.5.49 C2551: ABNORMALLY LOW TONER DENSITY DETECTED CYAN TCR SENSOR
19.5.50 C2553: ABNORMALLY LOW TONER DENSITY DETECTED MAGENTA TCR SENSOR
19.5.51 C2555: ABNORMALLY LOW TONER DENSITY DETECTED YELLOW TCR SENSOR
19.5.52 C2557: ABNORMALLY LOW TONER DENSITY DETECTED BLACK TCR SENSOR
19.5.53 C2552: ABNORMALLY HIGH TONER DENSITY DETECTED CYAN TCR SENSOR
19.5.54 C2554: ABNORMALLY HIGH TONER DENSITY DETECTED MAGENTA TCR SENSOR
19.5.55 C2556: ABNORMALLY HIGH TONER DENSITY DETECTED YELLOW TCR SENSOR
19.5.56 C2558: ABNORMALLY HIGH TONER DENSITY DETECTED BLACK TCR SENSOR
19.5.57 C2559: CYAN TCR SENSOR ADJUSTMENT FAILURE
19.5.58 C255A: MAGENTA TCR SENSOR ADJUSTMENT FAILURE
19.5.59 C255B: YELLOW TCR SENSOR ADJUSTMENT FAILURE
19.5.60 C255C: BLACK TCR SENSOR ADJUSTMENT FAILURE
19.5.61 C2561: CYAN TCR SENSOR FAILURE
19.5.62 C2562: MAGENTA TCR SENSOR FAILURE
19.5.63 C2563: YELLOW TCR SENSOR FAILURE
19.5.64 C2564: BLACK TCR SENSOR FAILURE
19.5.65 C2650: MAIN BACKUP MEDIA ACCESS ERROR
19.5.66 C2A11: DRUM UNIT/C NEW ARTICLE RELEASE
19.5.67 C2A12: DRUM UNIT/M NEW ARTICLE RELEASE
19.5.68 C2A13: DRUM UNIT/Y NEW ARTICLE RELEASE
19.5.69 C2A14: DRUM UNIT/K NEW ARTICLE RELEASE
19.5.70 C3101: FUSING ROLLER SEPARATION FAILURE
19.5.71 C3201: FUSING MOTOR FAILURE TO TURN
19.5.72 C3202: FUSING MOTOR TURNING AT ABNORMAL TIMING
19.5.73 C3302: FUSING COOLING FAN MOTOR/2, 3 FAILURE TO TURN
19.5.74 C3421: FUSING HEATERS TROUBLE (HEATING SIDE)
19.5.75 C3423: FUSING HEATERS TROUBLE (PRESSURIZING SIDE)
19.5.76 C3721: FUSING ABNORMALLY HIGH TEMPERATURE DETECTION
(CENTER OF THE HEATING SIDE)
19.5.77 C3722: FUSING ABNORMALLY HIGH TEMPERATURE DETECTION
(EDGE OF THE HEATING SIDE)
19.5.78 C3723: FUSING ABNORMALLY HIGH TEMPERATURE DETECTION (PRESSURIZING SIDE)

19.5.79 C3821: FUSING ABNORMALLY LOW TEMPERATURE DETECTION (HEATING SIDE)
19.5.80 C3823: FUSING ABNORMALLY LOW TEMPERATURE DETECTION (PRESSURIZING SIDE)

19.5.81 C3921: FUSING SENSOR WIRE BREAKS DETECTION (HEATING SIDE)
19.5.82 C3923: FUSING SENSOR WIRE BREAKS DETECTION (PRESSURIZING SIDE)
19.5.83 C4101: POLYGON MOTOR ROTATION TROUBLE
19.5.84 C4501: LASER MALFUNCTION
19.5.85 C5102: TRANSPORT MOTORS FAILURE TO TURN
19.5.86 C5103: TRANSPORT MOTORS TURNING AT ABNORMAL TIMING
19.5.87 C5351: POWER SUPPLY COOLING FAN MOTOR/1S FAILURE TO TURN
19.5.88 C5354: EXHAUST FAN MOTORS FAILURE TO TURN
19.5.89 C5355: COOLING FAN MOTOR/3S FAILURE TO TURN
19.5.90 C5501: AC SIGNAL ABNORMALITY
19.5.91 C5601: ENGINE CONTROL MALFUNCTION
19.5.92 C6102: DRIVE SYSTEM HOME SENSOR MALFUNCTION
19.5.93 C6103: SLIDER OVER RUNNING
19.5.94 C6704: IMAGE INPUT TIME OUT
19.5.95 C6751: CCD CLAMP/GAIN ADJUSTMENT FAILURE
19.5.96 C6752: ASIC CLOCK INPUT ERROR (FRONT SIDE)
19.5.97 C6753: ASIC CLOCK INPUT ERROR (BACK SIDE)
19.5.98 C6901: DSC BOARD MOUNT FAILURE 1
19.5.99 C6902: DSC BOARD BUS CHECK NG1-1
19.5.100 C6903: DSC BOARD BUS CHECK NG1-2
19.5.101 C6F01: SCANNER SEQUENCE TROUBLE 1
19.5.102 C8101: BEFORE READING PRESSURE WELDING ALIENATION MECHANISM TROUBLE
19.5.103 C8102: TURN AROUND PRESSURE WELDING ALIENATION TROUBLE
19.5.104 C8103: LIFT UP MECHANISM TROUBLE (UPWARD MOVEMENT)
19.5.105 C8106: LIFT UP MECHANISM TROUBLE (DOWNWARD MOVEMENT)
19.5.106 C8107: GLASS CLEANING MECHANISM TROUBLE
19.5.107 C8302: COOLING FAN TROUBLE
19.5.108 C8401: EEPROM FAILURE
19.5.109 C9401: EXPOSURE TURNING ON THE LAMP TROUBLE DETECTION
19.5.110 C9402: EXPOSURE TURNING ON THE LAMP ABNORMALLY DETECTION
19.5.111 CA051: STANDARD CONTROLLER CONFIGURATION FAILURE
19.5.112 CA052: CONTROLLER HARDWARE ERROR
19.5.113 CA053: CONTROLLER START FAILURE
19.5.114 CC001: VENDOR CONNECTION FAILURE
19.5.115 CC151: ROM CONTENTS ERROR UPON STARTUP (MSC)
19.5.116 CC152: ROM CONTENTS ERROR UPON STARTUP (SCANNER)
19.5.117 CC153: ROM CONTENTS ERROR UPON STARTUP (PRT)
19.5.118 CC155: FINISHER ROM ERROR
19.5.119 CC156: ADF ROM ERROR
19.5.120 CC159: ROM CONTENTS ERROR UPON STARTUP (DSC1)
19.5.121 CC15A: ROM CONTENTS ERROR UPON STARTUP (DSC2)
19.5.122 CC163: ROM CONTENTS ERROR (PRT)
19.5.123 CC164: ROM CONTENTS ERROR (MSC)
19.5.124 CC165: ROM CONTENTS ERROR (ADF)
19.5.125 CC170: DYNAMIC LINK ERROR DURING STARTING (AP0)
19.5.126 CC171: DYNAMIC LINK ERROR DURING STARTING (AP1)
19.5.127 CC172: DYNAMIC LINK ERROR DURING STARTING (AP2)
19.5.128 CC173: DYNAMIC LINK ERROR DURING STARTING (AP3)
19.5.129 CC174: DYNAMIC LINK ERROR DURING STARTING (AP4)
19.5.130 CC180: DYNAMIC LINK ERROR DURING STARTING (LDR)
19.5.131 CC181: DYNAMIC LINK ERROR DURING STARTING (IBR)
19.5.132 CC182: DYNAMIC LINK ERROR DURING STARTING (IID)
19.5.133 CC183: DYNAMIC LINK ERROR DURING STARTING (IPF)
19.5.134 CC184: DYNAMIC LINK ERROR DURING STARTING (IMY)
19.5.135 CC185: DYNAMIC LINK ERROR DURING STARTING (SPF)
19.5.136 CC186: DYNAMIC LINK ERROR DURING STARTING (OAP)
19.5.137 CC190: OUTLINE FONT LOAD ERROR
19.5.138 CD002: JOB RAM SAVE ERROR
19.5.139 CD004: HARD DISK ACCESS ERROR (CONNECTION FAILURE)
19.5.140 CD00F: HARD DISK DATA TRANSFER ERROR
19.5.141 CD020: HARD DISK VERIFY ERROR
19.5.142 CD010: HARD DISK UNFORMAT
19.5.143 CD011: HARD DISK OUT OF SPECIFICATIONS MOUNTED
19.5.144 CD041 TO CD046: HDD COMMAND EXECUTION ERROR ADDRESS MARK NOT FOUND

19.5.145 CD047 TO CD04B: HDD SCSI LIBRARY ERROR
19.5.146 CD201: FILE MEMORY MOUNTING ERROR
19.5.147 CD202: MEMORY CAPACITY DISCREPANCY
19.5.148 CD203: MEMORY CAPACITY DISCREPANCY 2
19.5.149 CD211: PCI-SDRAM DMA OPERATION FAILURE
19.5.150 CD212: COMPRESSION/EXTRACTION TIMEOUT DETECTION
19.5.151 CD231: NO FAX MEMORY AT FAX BOARD MOUNTING
19.5.152 CD241: ENCRYPTION ASIC SETTING ERROR
19.5.153 CD242: ENCRYPTION ASIC MOUNTING ERROR
19.5.154 CD252: NO RELAY CIRCUIT BOARDS FOR IC-412 MOUNTING AT IC-412 MOUNT SETTING

19.5.155 CD261: USB HOST BOARD FAILURE
19.5.156 CD271: I-OPTION ACTIVATED AND ADDITIONAL MEMORY NOT INSTALLED
19.5.157 CD272: I-OPTION ACTIVATED AND ADDITIONAL MEMORY AND HDD NOT INSTALLED 662
19.5.158 CD401: NACK COMMAND INCORRECT
19.5.159 CD402: ACK COMMAND INCORRECT
19.5.160 CD403: CHECKSUM ERROR
19.5.161 CD404: RECEIVING PACKET INCORRECT
19.5.162 CD405: RECEIVING PACKET ANALYSIS ERROR
19.5.163 CD406: ACK RECEIVING TIMEOUT
19.5.164 CD407: RETRANSMISSION TIMEOUT
19.5.165 CE001: ABNORMAL MESSAGE QUEUE
19.5.166 CE003: TASK ERROR
19.5.167 CE004: EVENT ERROR
19.5.168 CE005: MEMORY ACCESS ERROR
19.5.169 CE006: HEADER ACCESS ERROR
19.5.170 CE007: DIMM INITIALIZE ERROR
19.5.171 CD3##: NVRAM DATA ERROR
19.5.172 CE002: MESSAGE AND METHOD PARAMETER FAILURE
19.5.173 CEEE1: MFP BOARD MALFUNCTION
19.5.174 CEEE2: SCANNER SECTION MALFUNCTION
19.5.175 CEEE3: PRINTER CONTROL BOARD MALFUNCTION
20. NETWORK ERROR CODE
20.1 DISPLAY PROCEDURE
20.2 LIST
21. POWER SUPPLY TROUBLE
21.1 MACHINE IS NOT ENERGIZED AT ALL (DCPU OPERATION CHECK)
21.2 FUSING HEATERS DO NOT OPERATE
21.3 POWER IS NOT SUPPLIED TO OPTION
21.3.1 DF-617
21.3.2 PC-107/207/408
21.3.3 FS-527/529
22. IMAGE QUALITY PROBLEM
22.1 HOW TO READ ELEMENT DATE
22.1.1 TABLE NUMBER
22.1.2 LEVEL HISTORY 1
22.1.3 LEVEL HISTORY 2
22.2 HOW TO IDENTIFY PROBLEMATIC PART
22.2.1 INITIAL CHECK ITEMS
22.3 SOLUTION
22.3.1 SCANNER SYSTEM: WHITE LINES, WHITE BANDS, COLORED LINES AND COLORED BANDS IN
SUB SCAN DIRECTION
22.3.2 SCANNER SYSTEM: WHITE LINES, WHITE BANDS, COLORED LINES AND COLORED BANDS IN
MAIN SCAN DIRECTION
22.3.3 SCANNER SYSTEM: COLOR SPOTS
22.3.4 SCANNER SYSTEM: FOG
22.3.5 SCANNER SYSTEM: BLURRED IMAGE, BLOTCHY IMAGE
22.3.6 SCANNER SYSTEM: INCORRECT COLOR IMAGE REGISTRATION, SYNC SHIFT (LINES IN MAIN
SCAN DIRECTION)
22.3.7 SCANNER SYSTEM: MOIRE
22.3.8 SCANNER SYSTEM: SKEWED IMAGE
22.3.9 SCANNER SYSTEM: DISTORTED IMAGE
22.3.10 SCANNER SYSTEM: LOW IMAGE DENSITY, ROUGH IMAGE
22.3.11 SCANNER SYSTEM: DEFECTIVE ACS
22.3.12 SCANNER SYSTEM: BLANK COPY, BLACK COPY
22.3.13 SCANNER SYSTEM: ABNORMAL IMAGE
22.3.14 SCANNER SYSTEM: UNEVEN DENSITY
22.3.15 PRINTER MONOCOLOR: WHITE LINES, WHITE BANDS, COLORED LINES AND COLORED BANDS
IN SUB SCAN DIRECTION
22.3.16 PRINTER MONOCOLOR: WHITE LINES, WHITE BANDS, COLORED LINES AND COLORED BANDS
IN MAIN SCAN DIRECTION
22.3.17 PRINTER MONOCOLOR: UNEVEN DENSITY IN SUB SCAN DIRECTION
22.3.18 PRINTER MONOCOLOR: UNEVEN DENSITY IN MAIN SCAN DIRECTION
22.3.19 PRINTER MONOCOLOR: LOW IMAGE DENSITY
22.3.20 PRINTER MONOCOLOR: GRADATION REPRODUCTION FAILURE
22.3.21 PRINTER MONOCOLOR: FOGGY BACKGROUND
22.3.22 PRINTER MONOCOLOR: VOID AREAS, WHITE SPOTS
22.3.23 PRINTER MONOCOLOR: COLORED SPOTS
22.3.24 PRINTER MONOCOLOR: BLURRED IMAGE
22.3.25 PRINTER MONOCOLOR: BLANK COPY, BLACK COPY
22.3.26 PRINTER MONOCOLOR: UNEVEN IMAGE
22.3.27 PRINTER 4-COLOR: WHITE LINES, WHITE BANDS, COLORED LINES AND COLORED BANDS IN
SUB SCAN DIRECTION
22.3.28 PRINTER 4-COLOR: WHITE LINES, WHITE BANDS, COLORED LINES AND COLORED BANDS IN
MAIN SCAN DIRECTION
22.3.29 PRINTER 4-COLOR: UNEVEN DENSITY IN SUB SCAN DIRECTION
22.3.30 PRINTER 4-COLOR: UNEVEN DENSITY IN MAIN SCAN DIRECTION
22.3.31 PRINTER 4-COLOR: LOW IMAGE DENSITY
22.3.32 PRINTER 4-COLOR: POOR COLOR REPRODUCTION
22.3.33 PRINTER 4-COLOR: INCORRECT COLOR IMAGE REGISTRATION
22.3.34 PRINTER 4-COLOR: VOID AREAS, WHITE SPOTS
22.3.35 PRINTER 4-COLOR: COLORED SPOTS
22.3.36 PRINTER 4-COLOR: POOR FUSING PERFORMANCE, OFFSET
22.3.37 PRINTER 4-COLOR: BRUSH EFFECT, BLURRED IMAGE
22.3.38 PRINTER 4-COLOR: BACK MARKING
22.3.39 PRINTER 4-COLOR: UNEVEN IMAGE
23. IC PROTECTOR
23.1 OUTLINE
23.2 IC PROTECTOR LIST
23.2.1 MAIN BODY
23.2.2 DF-617
23.2.3 PC-107/PC-207
23.2.4 PC-408
23.2.5 JS-505
23.2.6 FS-527
23.2.7 SD-509
23.2.8 FS-529
APPENDIX
24. PARTS LAYOUT DRAWING
24.1 MAIN BODY
24.1.1 SCANNER SECTION
24.1.2 FRONT SIDE
24.1.3 LEFT SIDE
24.1.4 BACK SIDE
24.1.5 RIGHT SIDE
24.1.6 MANUAL BYPASS TRAY
24.1.7 TRAY 1
24.1.8 TRAY 2
24.1.9 FUSING/PAPER EXIT SECTION
24.2 DF-617/SP-501
24.3 PC-107/PC-207 (OPTION)
24.4 PC-408 (OPTION)
24.5 JS-505 (OPTION)
24.6 FS-527 (OPTION)
24.7 PK-517 (OPTION)
24.8 SD-509 (OPTION)
24.9 JS-603 (OPTION)
24.10 FS-529 (OPTION)
25. CONNECTOR LAYOUT DRAWING
25.1 MAIN BODY
25.1.1 PRINTER CONTROL BOARD (PRCB)
25.1.2 MFP BOARD (MFPB)
25.1.3 PCI BOARD (PCIB)
25.1.4 PH RELAY BOARD (PHREYB)
25.1.5 FRONT SIDE RELAY BOARD (FREYB)
25.1.6 SCANNER RELAY BOARD (REYB/SCAN)
25.1.7 DF CONTROL BOARD (DFCB)
25.1.8 PC CONTROL BOARD (PCCB)
25.1.9 FS CONTROL BOARD (FSCB)
25.1.10 SD DRIVE BOARD (SDDB)
26. RELAY CONNECTOR LAYOUT DRAWING
26.1 HOW TO READ THE RELAY CONNECTOR LAYOUT DRAWING
26.2 MAIN BODY
27. TIMING CHART
27.1 MAIN BODY
27.1.1 TIMING CHART WHEN THE MAIN POWER SWITCH IS TURNED ON
27.1.2 TIMING CHART IN COLOR MODE
27.2 DF-617
27.2.1 1-SIDED MODE
27.2.2 2-SIDED MODE
27.3 FS-527/SD-509/PK-517
27.3.1 SHIFT MODE
27.3.2 2 FLAT STITCHING STAPLES MODE
27.3.3 CENTER STAPLES MODE
27.3.4 PUNCH MODE
27.4 JS-603
27.4.1 TRAY3 PAPER EXIT MODE
27.5 FS-529
27.5.1 SHIFT MODE
27.5.2 1 FLAT STITCHING STAPLE MODE
27.5.3 2 FLAT STITCHING STAPLES MODE

I-OPTION LK-101 V2/102/103 V2/105
OUTLINE
1. PRODUCT OUTLINE
1.1 AVAILABLE FUNCTION FOR I-OPTION
1.2 PRODUCT SPECIFICATION
1.2.1 WEB BROWSER FUNCTION
1.2.2 PHOTO REGISTRATION FUNCTION
ADJUSTMENT/SETTING
2. HOW TO USE THE ADJUSTMENT/SETTING SECTION
3. SERVICE MODE
3.1 BILLING SETTING FUNCTION SETTING PROCEDURE
3.2 BILLING SETTING FUNCTION TREE
3.3 SETTINGS IN THE LICENSE MANAGEMENT
3.3.1 ACTIVATION
3.3.2 DEACTIVATION
3.3.3 REPAIR
3.3.4 INITIALIZE
3.3.5 REQUEST CODE
3.3.6 LIST
3.3.7 FUNCTION LIST
3.4 LICENSE MANAGEMENT FUNCTION SETTING PROCEDURE
3.4.1 ACTIVATION
3.4.2 DEACTIVATION
3.4.3 REPAIR
3.4.4 INITIALIZE
TROUBLESHOOTING
4. TROUBLESHOOTING OF I-OPTION
4.1 OUTLINE
4.1.1 STRUCTURE OF LICENSE MANAGEMENT
4.1.2 LICENSE MANAGEMENT INFORMATION
4.2 ERROR MESSAGE
4.2.1 LICENSE MANAGEMENT ERROR

I-OPTION LK-101 V2/102/103 V2/105
OUTLINE
1. PRODUCT OUTLINE
1.1 AVAILABLE FUNCTION FOR I-OPTION
1.2 PRODUCT SPECIFICATION
1.2.1 WEB BROWSER FUNCTION
1.2.2 PHOTO REGISTRATION FUNCTION
ADJUSTMENT/SETTING
2. HOW TO USE THE ADJUSTMENT/SETTING SECTION
3. SERVICE MODE
3.1 BILLING SETTING FUNCTION SETTING PROCEDURE
3.2 BILLING SETTING FUNCTION TREE
3.3 SETTINGS IN THE LICENSE MANAGEMENT
3.3.1 ACTIVATION
3.3.2 DEACTIVATION
3.3.3 REPAIR
3.3.4 INITIALIZE
3.3.5 REQUEST CODE
3.3.6 LIST
3.3.7 FUNCTION LIST
3.4 LICENSE MANAGEMENT FUNCTION SETTING PROCEDURE
3.4.1 ACTIVATION
3.4.2 DEACTIVATION
3.4.3 REPAIR
3.4.4 INITIALIZE
TROUBLESHOOTING
4. TROUBLESHOOTING OF I-OPTION
4.1 OUTLINE
4.1.1 STRUCTURE OF LICENSE MANAGEMENT
4.1.2 LICENSE MANAGEMENT INFORMATION
4.2 ERROR MESSAGE
4.2.1 LICENSE MANAGEMENT ERROR

DF-617/SP-501
OUTLINE
1. PRODUCT SPECIFICATIONS
MAINTENANCE
2. PERIODICAL MAINTENANCE PROCEDURE
2.1 TAKE-UP SECTION
2.1.1 CLEANING OF THE PICK-UP ROLLER/FEED ROLLER
2.1.2 CLEANING OF THE SEPARATION ROLLER
2.1.3 REPLACING THE PICK-UP ROLLER / FEED ROLLER
2.1.4 REPLACING THE SEPARATION ROLLER
2.2 TRANSPORT SECTION
2.2.1 CLEANING OF THE MISCELLANEOUS ROLLS
2.2.2 CLEANING OF THE MISCELLANEOUS ROLLERS
2.3 SCANNING SECTION
2.3.1 CLEANING OF THE SCANNING GUIDE
2.3.2 CLEANING OF THE REFLECTIVE SENSOR SECTION
3. OTHER MAINTENANCE ITEM
3.1 ITEMS NOT ALLOWED TO BE DISASSEMBLED AND ADJUSTED
3.2 DISASSEMBLY/REASSEMBLY PARTS LIST
3.3 DISASSEMBLY/REASSEMBLY PROCEDURE
3.3.1 FEED COVER
3.3.2 FRONT COVER
3.3.3 REAR COVER
3.3.4 DOCUMENT FEED TRAY FRONT COVER
3.3.5 REVERSE AUTOMATIC DOCUMENT FEEDER
3.3.6 GLASS CLEANING ROLLER UNIT
3.3.7 DF CONTROL BOARD (DFCB)
3.3.8 RESTRICTION PLATE POSITIONAL VOLUME (VR1)
3.3.9 SWITCH BACK SOLENOID (SD1)
3.3.10 EXIT SWITCH BACK SOLENOID (SD2)
3.3.11 READING MOTOR (M1)
3.3.12 REGISTRATION MOTOR (M2)
3.3.13 EXIT MOTOR (M3)
3.3.14 READING ROLLER PRESSURE/RETRACTION MOTOR (M4)
3.3.15 TAKE-UP MOTOR (M8)
3.3.16 GLASS CLEANING MOTOR (M9)
3.3.17 COOLING FAN (FM1)
3.3.18 REPLACING THE STAMP UNIT
3.3.19 SPARE TX MARKER STAMP 2
4. SERVICE TOOL
4.1 CE TOOL LIST
ADJUSTMENT/SETTING
5. HOW TO USE THE ADJUSTMENT SECTION
6. MECHANICAL ADJUSTMENT
6.1 MECHANICAL ADJUSTMENT OF THE ORIGINAL DOCUMENT FEED SECTION
6.1.1 ADJUSTING THE HEIGHT
6.1.2 ADJUSTING SKEW FEED

PC-107/PC-207
OUTLINE
1. PRODUCT SPECIFICATIONS
MAINTENANCE
2. PERIODICAL MAINTENANCE PROCEDURE
2.1 PAPER FEED SECTION
2.1.1 REPLACING THE SEPARATION ROLLER
2.1.2 REPLACING THE FEED ROLLER
2.1.3 REPLACING THE PICK-UP ROLLER
3. OTHER MAINTENANCE ITEM
3.1 ITEMS NOT ALLOWED TO BE DISASSEMBLED AND ADJUSTED
3.2 DISASSEMBLY/REASSEMBLY PARTS LIST
3.3 CLEANING PARTS LIST
3.4 DISASSEMBLY/REASSEMBLY PROCEDURE
3.4.1 RIGHT DOOR/REAR RIGHT COVER/LOWER RIGHT COVER/FRONT RIGHT COVER
3.4.2 REAR COVER/LEFT COVER
3.4.3 PC CONTROL BOARD (PCCB)
3.4.4 TRAY3 LIFT-UP MOTOR (M124) / TRAY4 LIFT-UP MOTOR (M125)
3.4.5 TRAY3 PAPER FEED MOTOR (M122) / TRAY3 VERTICAL TRANSPORT MOTOR (M120)
TRAY4 PAPER FEED MOTOR (M123) / TRAY4 VERTICAL TRANSPORT MOTOR (M121)
3.5 CLEANING POINT
3.5.1 SEPARATION ROLLER
3.5.2 FEED ROLLER
3.5.3 PICK-UP ROLLER
3.5.4 VERTICAL TRANSPORT ROLLER
ADJUSTMENT/SETTING
4. HOW TO USE THE ADJUSTMENT SECTION
5. MECHANICAL ADJUSTMENT
5.1 ADJUSTING THE PAPER REFERENCE POSITION

PC-408
OUTLINE
1. PRODUCT SPECIFICATION
MAINTENANCE
2. PERIODICAL MAINTENANCE PROCEDURE
2.1 PAPER FEED SECTION
2.1.1 REPLACING THE SEPARATION ROLLER
2.1.2 REPLACING THE FEED ROLLER
2.1.3 REPLACING THE PICK-UP ROLLER
3. OTHER MAINTENANCE ITEM
3.1 ITEMS NOT ALLOWED TO BE DISASSEMBLED AND ADJUSTED
3.2 DISASSEMBLY/REASSEMBLY PARTS LIST
3.3 CLEANING PARTS LIST
3.4 DISASSEMBLY/REASSEMBLY PARTS LIST
3.4.1 RIGHT DOOR/REAR RIGHT COVER/LOWER RIGHT COVER/FRONT RIGHT COVER
3.4.2 REAR COVER/LEFT COVER
3.4.3 PC CONTROL BOARD (PCCB)
3.4.4 PAPER FEED MOTOR (M1) / VERTICAL TRANSPORT MOTOR (M2)
3.4.5 DIVISION BOARD POSITION MOTOR (M3)
3.4.6 SHIFT MOTOR (M4)
3.4.7 TRAY LOCK SOLENOID (SD1)
3.4.8 DRAWER
3.4.9 WIRE
3.5 CLEANING POINT
3.5.1 SEPARATION ROLLER
3.5.2 FEED ROLLER
3.5.3 PICK-UP ROLLER
3.5.4 VERTICAL TRANSPORT ROLLER
ADJUSTMENT/SETTING
4. HOW TO USE THE ADJUSTMENT SECTION
5. MECHANICAL ADJUSTMENT
5.1 ADJUSTING THE PAPER REFERENCE POSITION
5.2 SHIFTER MOVEMENT TIMING BELT ADJUSTMENT

JS-505
OUTLINE
1. PRODUCT SPECIFICATIONS
MAINTENANCE
2. PERIODICAL MAINTENANCE PROCEDURE
2.1 PAPER EXIT SECTION
2.1.1 CLEANING OF THE ROLLER AND ROLL
3. OTHER MAINTENANCE ITEM
3.1 ITEMS NOT ALLOWED TO BE DISASSEMBLED AND ADJUSTED
3.2 DISASSEMBLY/REASSEMBLY PARTS LIST
3.3 DISASSEMBLY/REASSEMBLY PROCEDURE
3.3.1 SEPARATOR
3.3.2 FRONT COVER
3.3.3 REAR LEFT COVER
3.3.4 REAR RIGHT COVER
3.3.5 UPPER TRAY
3.3.6 PAPER GUIDE PLATE
3.3.7 JS CONTROL BOARD (JSCB)
3.3.8 TRANSPORT MOTOR (M1)
3.3.9 ROUTE CHANGE MOTOR (M3)
3.3.10 SHIFT MOTOR (M2)
3.3.11 ROLLER PRESSURE/RETRACTION CLUTCH (CL1)

FS-527
OUTLINE
1. PRODUCT SPECIFICATIONS
MAINTENANCE
2. PERIODICAL MAINTENANCE PROCEDURE
2.1 PAPER EXIT SECTION
2.1.1 CLEANING PROCEDURE FOR EACH PARTS
2.1.2 REPLACING THE UPPER PADDLES
2.1.3 REPLACING THE LOWER PADDLES
3. OTHER MAINTENANCE ITEM
3.1 ITEMS NOT ALLOWED TO BE DISASSEMBLED AND ADJUSTED
3.2 DISASSEMBLY/REASSEMBLY PARTS LIST
3.3 DISASSEMBLY/REASSEMBLY PROCEDURE
3.3.1 UPPER COVER
3.3.2 REAR COVER
3.3.3 FRONT DOOR
3.3.4 FRONT UPPER COVER
3.3.5 FRONT LOWER COVER
3.3.6 FINISHER
3.3.7 HORIZONTAL TRANSPORT UNIT
3.3.8 STAPLER UNIT
3.3.9 FS CONTROL BOARD (FSCB)
3.3.10 PAPER PASSAGE MOTOR/1 (M1)
3.3.11 DUPLEX PATH SWITCHING MOTOR (M2)
3.3.12 EXIT MOTOR (M5)
3.3.13 PAPER PASSAGE MOTOR/2 (M3)
3.3.14 CONVEYANCE MOTOR (M4)
3.3.15 UPPER LOWER PATH SWITCHING MOTOR (M6)
3.3.16 TRAY1 PATH SWITCHING MOTOR (M8)
3.3.17 EXIT ROLLER RETRACTION MOTOR (M9)
3.3.18 ACCOMMODATION ROLLER RETRACTION MOTOR (M10)
3.3.19 STAPLER MOVEMENT MOTOR (M11)
3.3.20 ACCOMMODATION PADDLE MOTOR (M12)
3.3.21 ELEVATE MOTOR (M15)
3.3.22 TRAY2 SHIFT MOTOR (M16)
3.3.23 ACCOMMODATION PADDLE SOLENOID (SD1)

PK-517
OUTLINE
1. PRODUCT SPECIFICATIONS
MAINTENANCE
2. PERIODICAL MAINTENANCE PROCEDURE
3. OTHER MAINTENANCE ITEM
3.1 ITEMS NOT ALLOWED TO BE DISASSEMBLED AND ADJUSTED
3.2 DISASSEMBLY/REASSEMBLY PARTS LIST
3.3 DISASSEMBLY/REASSEMBLY PROCEDURE
3.3.1 PUNCH KIT
ADJUSTMENT/SETTING
4. HOW TO USE THE ADJUSTMENT SECTION
5. MECHANICAL ADJUSTMENT
5.1 MECHANICAL ADJUSTMENT OF THE PUNCH SECTION
5.1.1 PUNCH HOLE DEVIATION CORRECTION

SD-509
OUTLINE
1. PRODUCT SPECIFICATIONS
MAINTENANCE
2. PERIODICAL MAINTENANCE PROCEDURE
3. OTHER MAINTENANCE ITEM
3.1 ITEMS NOT ALLOWED TO BE DISASSEMBLED AND ADJUSTED
3.2 DISASSEMBLY/REASSEMBLY PARTS LIST
3.3 DISASSEMBLY/REASSEMBLY PROCEDURE
3.3.1 FRONT COVER
3.3.2 RIGHT COVER
3.3.3 STAPLE UNIT COVER
3.3.4 SADDLE UNIT
3.3.5 PAPER EXIT TRAY
3.3.6 STAPLE UNIT
3.3.7 SD DRIVE BOARD (SDDB)
3.3.8 LEADING EDGE STOPPER MOTOR (M20)
3.3.9 UPPER PADDLE MOTOR (M21)
3.3.10 LOWER PADDLE MOTOR (M22)
3.3.11 CENTER STAPLE ALIGNMENT MOTOR/R (M23)
3.3.12 CENTER STAPLE ALIGNMENT MOTOR/F (M24)
3.3.13 CENTER FOLD ROLLER MOTOR (M25)
3.3.14 CENTER FOLD PLATE MOTOR (M26)
3.3.15 LEADING EDGE GRIP SOLENOID (SD3)
ADJUSTMENT/SETTING
4. HOW TO USE THE ADJUSTMENT SECTION
5. MECHANICAL ADJUSTMENT
5.1 MECHANICAL ADJUSTMENT OF THE PAPER EXIT SECTION
5.1.1 HALF-FOLD SKEW ADJUSTMENT

JS-603
OUTLINE
1. PRODUCT SPECIFICATIONS
MAINTENANCE
2. PERIODICAL MAINTENANCE PROCEDURE
3. OTHER MAINTENANCE ITEM
3.1 ITEMS NOT ALLOWED TO BE DISASSEMBLED AND ADJUSTED
3.2 DISASSEMBLY/REASSEMBLY PARTS LIST
3.3 DISASSEMBLY/REASSEMBLY PROCEDURE
3.3.1 SEPARATOR
3.3.2 TRAY3 EXIT ROLLER RETRACTION MOTOR (M17)

FS-529
OUTLINE
1. PRODUCT SPECIFICATIONS
MAINTENANCE
2. PERIODICAL MAINTENANCE PROCEDURE
2.1 PAPER EXIT SECTION
2.1.1 CLEANING PROCEDURE FOR EACH PARTS
3. OTHER MAINTENANCE ITEM
3.1 ITEMS NOT ALLOWED TO BE DISASSEMBLED AND ADJUSTED
3.2 DISASSEMBLY/REASSEMBLY PARTS LIST
3.3 DISASSEMBLY/REASSEMBLY PROCEDURE
3.3.1 FRONT LEFT COVER
3.3.2 FRONT RIGHT COVER
3.3.3 UPPER COVER
3.3.4 REAR COVER
3.3.5 FINISHER
3.3.6 CONVEYANCE ROLLER UNIT
3.3.7 STAPLER UNIT
3.3.8 PAPER EXIT TRAY UNIT
3.3.9 FS CONTROL BOARD (FSCB)
3.3.10 PICK UP ROLLER POSITION MOTOR (M1)
3.3.11 TRAY UP/DOWN MOTOR (M2)
3.3.12 CONVEYANCE MOTOR/1 (M5)
3.3.13 CONVEYANCE MOTOR/2 (M6)
3.3.14 STAPLER MOVEMENT MOTOR (M7)
3.3.15 FAN MOTOR (FM1)
3.3.16 PADDLE SOLENOID (SD2)
3.3.17 FLAPPER SOLENOID (SD4)
3.3.18 BELT RETRACT SOLENOID (SD5)
3.3.19 HARNESS GUIDE

Number of pages: 1122.