Konica Minolta Bizhub C652 Bizhub C652DS Bizhub C552 Bizhub C552DS Bizhub C452 Field Service Manual

Field Service Manual Konica Minolta Bizhub C652 Bizhub C652DS Bizhub C552 Bizhub C552DS Bizhub C452;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Konica Minolta Bizhub copier.
You can print, zoom or read any diagram, picture or page from this Field Service Manual. Every chapter on this manual is fully detailed and contain all theĀ  simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Konica Minolta Bizhub C652 Bizhub C652DS Bizhub C552 Bizhub C552DS Bizhub C452 photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

Bizhub C652/C652DS/C552/C552DS/C452 Main body
OUTLINE
1. SYSTEM CONFIGURATION
1.1 bizhub C652/C552
1.2 bizhub C452
1.3 bizhub C652DS/C552DS
2. PRODUCT SPECIFICATIONS
2.1 Type
2.2 Functions
2.3 Paper
2.4 Materials
2.5 Print volume
2.6 Machine specifications
2.7 Operating environment
2.8 Print functions
2.9 Scan functions

MAINTENANCE
3. PERIODICAL MIANTENANCE ITEMS
3.1 Concept of periodical maintenance
3.1.1 Main body
3.1.2 Automatic document feeder (ADF)
3.1.3 LU-204/301
3.1.4 ZU-606
3.1.5 FS-526
3.1.6 SD-508
3.1.7 PK-516
3.1.8 JS-602
3.1.9 PI-505
3.1.10 FS-527
3.2 Periodical replacement parts list
3.2.1 Main body
3.2.2 Option
3.3 Periodical cleaning parts list
3.3.1 Main body
3.3.2 Option
3.4 CMS corresponding parts
3.4.1 CMS corresponding parts
3.4.2 CMS corresponding parts list
3.4.3 Replacing CMS corresponding parts as a set
3.5 Concept of parts life
3.5.1 Life value of consumables and parts
3.5.2 Conditions for life specifications values
3.5.3 Control causing inhibited printing for one part when an inhibited-printing event occurs in another part
4. PERIODICAL MAINTENANCE PROCEDURE
4.1 Housing section
4.1.1 Replacing the ozone filter
4.1.2 Replacing the toner filter
4.2 Write section
4.2.1 Cleaning of the PH window Y/M/C/K
4.3 Imaging unit section
4.3.1 Replacing the imaging unit/Y,M,C
4.3.2 Replacing the drum unit/K
4.4 Charging section
4.4.1 Cleaning of the electrostatic charger wire/Y,M,C
4.5 Developing section
4.5.1 Replacing the developing unit/K
4.6 Toner supply section
4.6.1 Replacing the toner cartridge
4.7 1st transfer section
4.7.1 Replacing the transfer belt unit
4.8 2nd transfer/separation section
4.8.1 Replacing the transfer roller unit
4.9 Toner collection section
4.9.1 Cleaning of the area around the waste toner collecting port
4.9.2 Replacing the waste toner box
4.10 Paper feed section
4.10.1 Replacing the tray 1 feed roller/tray 1 pick-up roller
4.10.2 Replacing the tray 1 separation roller assy
4.10.3 Replacing the tray 2 feed roller/tray 2 pick-up roller
4.10.4 Replacing the tray 2 separation roller assy
4.10.5 Replacing the tray 3 feed roller/tray 3 pick-up roller
4.10.6 Replacing the tray 3 separation roller
4.10.7 Replacing the tray 4 feed roller/tray 4 pick-up roller
4.10.8 Replacing the tray 4 separation roller
4.10.9 Replacing the manual bypass tray feed roller/manual bypass tray pick-up roller
4.10.10 Replacing the manual bypass tray separation roller assy
4.11 Vertical conveyance section
4.11.1 Cleaning of the paper dust remover
4.12 Registration section
4.12.1 Cleaning of the timing roller
4.13 Fusing section
4.13.1 Replacing the fusing unit
4.13.2 Cleaning of the IH coil unit
4.14 Duplex section
4.14.1 Cleaning of the duplex transport rollers
5. OTHER MAINTENANCE ITEMS
5.1 Disassembly/adjustment prohibited items
5.1.1 CCD unit
5.1.2 PH unit
5.1.3 Fusing unit
5.2 Disassembly/reassembly parts list
5.3 Cleaning parts list
5.4 Need lubrication parts list
5.5 Disassembly/reassembly procedure
5.5.1 Upper front door
5.5.2 Lower front door
5.5.3 Upper front cover /1
5.5.4 Upper front cover /2
5.5.5 Right front cover
5.5.6 Lower front cover
5.5.7 Upper left cover
5.5.8 Lower left cover
5.5.9 Rear left cover
5.5.10 Paper exit rear cover
5.5.11 Scanner rear cover
5.5.12 Scanner right cover
5.5.13 Scanner upper rear cover/1
5.5.14 Scanner upper rear cover/2
5.5.15 Scanner left cover
5.5.16 Scanner upper front cover
5.5.17 Scanner front cover
5.5.18 USB interface cover
5.5.19 Original glass
5.5.20 Interface cover/1
5.5.21 Interface cover/2
5.5.22 Rear right cover/1
5.5.23 Rear right cover/2
5.5.24 Manual bypass tray rear cover
5.5.25 Upper rear cover/1
5.5.26 Upper rear cover/2
5.5.27 Lower rear cover
5.5.28 Front right cover
5.5.29 Control panel assy
5.5.30 Exit tray (option: OT-503)
5.5.31 Tray 1/2
5.5.32 Tray 3/4
5.5.33 PH unit
5.5.34 Duplex unit
5.5.35 Manual bypass tray unit
5.5.36 CCD unit
5.5.37 Original glass moving unit
5.5.38 Glass step sheet
5.5.39 Exposure unit
5.5.40 Hard disk
5.5.41 IH coil (FH1)
5.5.42 Intermediate transport roller assy
5.5.43 Main drive unit
5.5.44 LCC drive unit
5.5.45 Scanner chassis
5.5.46 Scanner relay board (REYB/SCAN)
5.5.47 Original glass position control board (OGPCB) (bizhub C652/C552/C452 only)
5.5.48 Inverter board (INVB)
5.5.49 PH relay board (REYB/PH)
5.5.50 Paper feed/transport drive board (PFTDB)
5.5.51 DC power supply (DCPU)
5.5.52 Relay drive board (REDB)
5.5.53 Printer control board (PRCB)
5.5.54 How to open PWB box/1
5.5.55 DS image processing board (DSIPB) (bizhub C652DS/C552DS only)
5.5.56 PCI board (PCIB)
5.5.57 MFP board (MFPB)
5.5.58 How to open PWB box/2
5.5.59 High voltage unit/2 (HV2)
5.5.60 Service EEPROM board (SV ERB)
5.5.61 High voltage unit/1 (HV1)
5.5.62 IH power supply (IHPU)
5.5.63 Paper size detect board/1 (PSDTB/1)
5.5.64 Paper size detect board/2 (PSDTB/2)
5.5.65 ADU transport motor/1 (M31)
5.5.66 ADU transport motor/2 (M32)
5.5.67 Bypass tray up down motor (M28) / bypass paper feed motor (M27)
5.5.68 Scanner motor (M201)
5.5.69 Original glass moving motor (M202) (bizhub C652/C552/C452 only)
5.5.70 Waste toner agitating motor (M20)
5.5.71 Transport motor (M25)
5.5.72 Vertical transport motor (M26)
5.5.73 Transfer belt motor (M1)
5.5.74 Color PC drum motor (M16)
5.5.75 Color developing motor (M17)
5.5.76 2nd image transfer pressure retraction motor (M3)
5.5.77 Registration motor (M2)
5.5.78 Fusing pressure retraction motor (M29)
5.5.79 Fusing motor (M30)
5.5.80 Switchback motor (M33)
5.5.81 Exit motor (M4)
5.5.82 K PC drum motor (M18)
5.5.83 K developing motor (M19)
5.5.84 Tray1 lift-up motor (M6)
5.5.85 Tray2 lift-up motor (M8)
5.5.86 Tray3 lift-up motor (M23)
5.5.87 Tray4 lift-up motor (M24)
5.5.88 Tray1 vertical transport motor (M5)
5.5.89 Tray2 vertical transport motor (M7)
5.5.90 Take-up motor (M22)
5.5.91 Charge cleaning motor/K (M15)
5.5.92 Cleaner motor (M38)
5.5.93 1st image transfer pressure retraction motor (M21)
5.5.94 Toner cartridge motor C/K (M14)
5.5.95 Toner cartridge motor Y/M (M13)
5.5.96 Toner supply motor/Y (M9), toner supply motor/M (M10), toner supply motor/C (M11), toner supply motor/K (M12)
5.5.97 Tray 1 paper feed clutch (CL1)
5.5.98 Tray 2 paper feed clutch 2 (CL2)
5.5.99 Horizontal transport clutch (CL3)
5.5.100 Tray 3 paper feed clutch (CL5)/Tray 3 transport clutch (CL6)
5.5.101 Tray 4 paper feed clutch (CL7)
5.5.102 IDC registration sensor/F (IDCS/F), IDC registration sensor/R (IDCS/R). 203
5.5.103 Scanner drive cables
5.5.104 Tray 3/4 lift wire
5.6 Cleaning procedure
5.6.1 Transfer belt unit
5.6.2 Tray 1 feed roller/tray 1 pick-up roller
5.6.3 Tray 1 separation roller
5.6.4 Tray 1 transport roller
5.6.5 Tray 2 feed roller/tray 2 pick-up roller
5.6.6 Tray 2 separation roller
5.6.7 Tray 2 transport roller
5.6.8 Tray 3 feed roller/tray 3 pick-up roller
5.6.9 Tray 3 separation roller
5.6.10 Tray 3 transport roller
5.6.11 Tray 4 feed roller/tray 4 pick-up roller
5.6.12 Tray 4 separation roller
5.6.13 Tray 4 transport roller
5.6.14 Manual bypass tray feed roller
5.6.15 Manual bypass tray pick-up roller
5.6.16 Manual bypass tray separation roller
5.6.17 Intermediate transport roller
5.6.18 Original glass
5.6.19 Scanner rails
5.6.20 Mirrors (1st/2nd/3rd)
5.6.21 Lens
5.6.22 CCD sensor
5.7 Lubrication procedure
5.7.1 Fusing unit
6. SERVICE TOOL
6.1 Service material list
6.2 CE tool list
7. FIRMWARE REWRITING
7.1 Outline
7.2 USB memory
7.2.1 Preparation
7.2.2 Procedure
7.2.3 Action when data transfer fails
7.3 Updating the firmware with the Internet ISW
7.3.1 Outline
7.3.2 Service environment
7.3.3 Preparations for firmware rewriting
7.3.4 Firmware rewriting from the control panel
7.3.5 Firmware rewriting from the CS Remote Care
7.3.6 Error code list for the Internet ISW
8. COMMERCIALLY AVAILABLE PARTS
8.1 Installing the key counter
8.1.1 Configuration
8.1.2 Procedure
8.2 Installing the original size detection 2 sensor (PS205)
8.2.1 Procedure

ADJUSTMENT/SETTING
9. HOW TO USE THE ADJUSTMENT/SETTING SECTION
10. UTILITY
10.1 List of utility mode
10.2 Starting/Exiting
10.2.1 Starting procedure
10.2.2 Exiting procedure
10.3 Touch Panel Adjustment
10.4 One-Touch User Box Registration
10.4.1 Create One-Touch destination-Address Book (Public)/(Personal)
10.4.2 Create One-Touch destination-Group
10.4.3 Create One-Touch destination-E-mail Settings
10.4.4 Create User Box
10.4.5 Create User Box-Public/Personal User Box
10.4.6 Create User Box-Bulletin Board User Box
10.4.7 Create User Box-Relay User Box
10.4.8 Limiting Access to Destinations
10.4.9 Limiting Access to Destinations-Apply Levels/Groups to Destinations
10.5 User Settings
10.5.1 System Settings-Language Selection
10.5.2 System Settings-Measurement Unit Settings
10.5.3 System Settings-Paper Tray Settings
10.5.4 System Settings-Auto Color Level Adjust
10.5.5 System Settings-Power Save Settings
10.5.6 System Settings-Output Settings
10.5.7 System Settings-AE Level Adjustment
10.5.8 System Settings-Auto Paper Select for Small Original
10.5.9 System Settings-Blank Page Print Settings
10.5.10 System Settings-Page Number Print Position
10.5.11 System Settings-Select Keyboard
10.5.12 Custom Display Settings-Copier Settings
10.5.13 Custom Display Settings-Scan/Fax Settings
10.5.14 Custom Display Settings-User Box Settings
10.5.15 Custom Display Settings-Copy Screen
10.5.16 Custom Display Settings-Fax Active Screen
10.5.17 Custom Display Settings-Color Selection Settings
10.5.18 Custom Display Settings-Left Panel Display Default
10.5.19 Custom Display Settings-Search Option Settings
10.5.20 Copier Settings-Auto Booklet ON when Fold & Staple
10.5.21 Copier Settings-Auto Zoom for Combine/Booklet
10.5.22 Copier Settings-Auto Sort/Group Selection
10.5.23 Copier Settings-Default Copy Settings
10.5.24 Copier Settings-Default Enlarge Display Settings
10.5.25 Copier Settings-When AMS Direction is Incorrect
10.5.26 Copier Settings-Separate Scan Output Method
10.5.27 Copier Settings-Enlargement Rotation
10.5.28 Copier Settings-Auto Zoom (Platen)
10.5.29 Copier Settings-Auto Zoom (ADF)
10.5.30 Copier Settings-Specify Default Tray when APS Off
10.5.31 Copier Settings-Select Tray for Insert Sheet
10.5.32 Copier Settings-Tri-Fold Print Side
10.5.33 Copier Settings-Half-Fold/Tri-Fold Specification
10.5.34 Copier Settings-Half-Fold Specification
10.5.35 Copier Settings-Print Jobs During Copy Operation
10.5.36 Copier Settings-Automatic Image Rotation
10.5.37 Copier Settings-Finishing Program
10.5.38 Copier Settings-Card Shot Settings
10.5.39 Scan/Fax Settings-JPEG Compression Level
10.5.40 Scan/Fax Settings-Black Compression Level
10.5.41 Scan/Fax Settings-TWAIN Lock Time
10.5.42 Scan/Fax Settings-Default Scan/Fax Settings
10.5.43 Scan/Fax Settings-Default Enlarge Display Settings
10.5.44 Scan/Fax Settings-Compact PDF/XPS Compression Level
10.5.45 Scan/Fax Settings-Color TIFF Type
10.5.46 Scan/Fax Settings-OCR Operation Setting
10.5.47 Scan/Fax Settings-Graphic Outlining
10.5.48 Printer Settings-Basic Settings
10.5.49 Printer Settings-Paper Setting
10.5.50 Printer Settings-PCL Settings
10.5.51 Printer Settings-PS Setting
10.5.52 Printer Settings-XPS Settings
10.5.53 Printer Settings-Print Reports
10.5.54 Printer Settings-TIFF Image Paper Setting
10.5.55 Change Password
10.5.56 Change E-mail Address
10.5.57 Change Icon
10.5.58 Register Authentication Settings
10.5.59 Registered Application Setting-Default Application Selection
10.5.60 Cellular Phone/PDA Setting-Link File Error Notification
10.5.61 Cellular Phone/PDA Setting-Proxy Server Use
10.5.62 Cellular Phone/PDA Setting-Print Settings
10.6 Administrator Settings
10.6.1 System Settings-Power Save Settings
10.6.2 System Settings-Output Settings
10.6.3 System Settings-Date/Time Settings
10.6.4 System Settings-Daylight Saving Time
10.6.5 System Settings-Weekly Timer Settings
10.6.6 System Settings-Restrict User Access
10.6.7 System Settings-Expert Adjustment
10.6.8 System Settings-List/Counter
10.6.9 System Settings-Reset Settings
10.6.10 System Settings-User Box Settings
10.6.11 System Settings-Standard Size Setting
10.6.12 System Settings-Stamp Settings
10.6.13 System Settings-Blank Page Print Settings
10.6.14 System Settings-Application Key Settings
10.6.15 System Settings-Skip Job Operation Settings
10.6.16 System Settings-Default Bypass Paper Type Setting
10.6.17 System Settings-Page Number Print Position
10.6.18 System Settings-Advanced Preview Setting
10.6.19 Administrator/Machine Settings-Administrator Registration
10.6.20 Administrator/Machine Settings-Input Machine Address
10.6.21 One-Touch/User Box Registration-Create One-Touch Destination
10.6.22 One-Touch/User Box Registration-Create User Box
10.6.23 One-Touch/User Box Registration-One-Touch/User Box Registration List
10.6.24 One-Touch/User Box Registration-Maximum Number of User Boxes
10.6.25 User Authentication/Account Track-General Settings
10.6.26 User Authentication/Account Track-User Authentication Setting
10.6.27 User Authentication/Account Track-Account Track Setting
10.6.28 User Authentication/Account Track-Print without Authentication
10.6.29 User Authentication/Account Track-Print Counter List
10.6.30 User Authentication/Account Track-External Server Settings
10.6.31 User Authentication/Account Track-Limiting Access to Destinations
10.6.32 User Authentication/Account Track-Authentication Device Settings
10.6.33 User Authentication/Account Track-Auth/Acct Track Common Setting
10.6.34 User Authentication/Account Track-Scan to Home Settings
10.6.35 User Authentication/Account Track-Scan to Authorized Folder Settings
10.6.36 Network Settings-TCP/IP Settings
10.6.37 Network Setting-NetWare Settings
10.6.38 Network Setting-http Server Settings
10.6.39 Network Setting-FTP Settings
10.6.40 Network Setting-SMB Setting
10.6.41 Network Setting-LDAP Settings
10.6.42 Network Setting-E-mail Settings
10.6.43 Network Setting-SNMP Setting
10.6.44 Network Setting-AppleTalk Settings
10.6.45 Network Setting-Bonjour Setting
10.6.46 Network Setting-TCP Socket Settings
10.6.47 Network Setting-Network Fax Setting
10.6.48 Network Setting-WebDAV Settings
10.6.49 Network Setting-Web Service Settings
10.6.50 Network Setting-SSDP Settings
10.6.51 Network Setting-Detail Settings
10.6.52 Network Settings-IEEE802.1X Authentication Settings
10.6.53 Network Settings-Web Browser Setting
10.6.54 Network Settings-Bluetooth Setting
10.6.55 Copier Settings-Auto Zoom (Platen)
10.6.56 Copier Settings-Auto Zoom (ADF)
10.6.57 Copier Settings-Specify Default Tray when APS OFF
10.6.58 Copier Settings-Select Tray for Insert Sheet
10.6.59 Copier Settings-Print Jobs During Copy Operation
10.6.60 Copier Settings-Tri-Fold Print Side
10.6.61 Copier Settings-Automatic Image Rotation
10.6.62 Copier Settings-Card Shot Settings
10.6.63 Printer Settings-USB Timeout
10.6.64 Printer Settings-Network Timeout
10.6.65 Printer Settings-Print XPS Errors
10.6.66 Printer Settings-PSWC Direct Print
10.6.67 Printer Settings-Assign Account to Acquire Device Info
10.6.68 Fax Settings
10.6.69 Fax Settings-Header Information
10.6.70 Fax Settings-Header/Footer Position
10.6.71 Fax Settings-Line Parameter Setting
10.6.72 Fax Settings-TX/RX Settings
10.6.73 Fax Settings-Function Settings
10.6.74 Fax Settings-PBX Connection Setting
10.6.75 Fax Settings-Report Settings
10.6.76 Fax Settings-Job Settings List
10.6.77 Fax Settings-Multi Lines Settings
10.6.78 Fax Settings-Network Fax Settings
10.6.79 System Connection-OpenAPI Settings
10.6.80 System Connection-Call Remote Center
10.6.81 System Connection-Automatic Prefix/Suffix Setting
10.6.82 System Connection-Printer Information
10.6.83 System Connection-Cellular Phone/PDA Setting
10.6.84 Security Settings-Administrator Password
10.6.85 Security Settings-User Box Admin. Setting
10.6.86 Security Settings-Administrator Security Levels
10.6.87 Security Settings-Security Details
10.6.88 Security Settings-Enhanced Security Mode
10.6.89 Security Settings-HDD Settings
10.6.90 Security Settings-Function Management Setting
10.6.91 Security Settings-Stamp Settings
10.6.92 Security Settings-Image Log Transfer Settings
10.6.93 Security Settings-Driver Password Encryption Setting
10.6.94 License Settings-Get Request Code
10.6.95 License Settings-Install License
10.6.96 License Settings-List of Enabled Functions
10.6.97 OpenAPI Authentication Management-Restriction Code Setting
10.7 Banner Printing
10.8 My Panel Settings
10.9 Device Information
11. ADJUSTMENT ITEM LIST
12. SERVICE MODE
12.1 List of service mode
12.2 Starting/Exiting
12.2.1 Starting procedure
12.3 Date/Time Input mode
12.4 Machine
12.4.1 Trail Edge Color Alignment Adj
12.4.2 Fusing Temperature
12.4.3 Fusing Transport Speed
12.4.4 Org. Size Detecting Sensor Adj
12.4.5 Printer Area-Leading Edge Adjustment
12.4.6 Printer Area-Printer Image Centering Side 1
12.4.7 Printer Area-Leading Edge Adj. Side 2 (Duplex)
12.4.8 Printer Area-Prt. Image Center. Side 2 (Dup)
12.4.9 Printer Area-Paper Feed Direction Adj
12.4.10 Scan Area
12.4.11 Scan Area-Image Position: Leading Edge
12.4.12 Scan Area-Scanner Image Centering
12.4.13 Scan Area-Main Scan Zoom Adj
12.4.14 Scan Area-Sub Scan Zoom Adj
12.4.15 Printer Reg. Loop Adj
12.4.16 Color Registration Adjustment-Cyan, Magenta, Yellow
12.4.17 Skew adjustment-Print Head Skew Adj
12.4.18 Skew adjustment-Print Head Skew Reset
12.4.19 LD adjustment-LD Timing Adj
12.4.20 LD adjustment-LD 1/2 Balance Adj
12.4.21 Manual Bypass Tray Width Adj
12.4.22 Lead Edge Erase Adjustment
12.4.23 Thick Paper Interval Setting
12.4.24 ADF Scan Glass Contamination
12.4.25 Non-Image Area Erase Check
12.5 Firmware Version
12.6 Imaging Process Adjustment
12.6.1 Gradation Adjust
12.6.2 Transfer Belt-Cleaning Bias
12.6.3 Transfer Belt-Auto Cleaning
12.6.4 Max Image Density Adj
12.6.5 TCR Level Setting
12.6.6 Image Background Adj
12.6.7 Transfer Voltage Fine Adj-Primary transfer adj
12.6.8 Transfer Voltage Fine Adj-Secondary transfer adj
12.6.9 Stabilizer-Stabilization Only
12.6.10 Stabilizer-Initialize+Image Stabilization
12.6.11 Thick Paper Density Adjustment
12.6.12 Paper separation adjustment
12.6.13 Manual Toner Add
12.6.14 Monochrome Density Adjustment
12.6.15 Grad/Dev AC Bias V Selection
12.7 CS Remote Care
12.7.1 Outlines
12.7.2 Setting up the CS Remote Care
12.7.3 Software SW setting for CS Remote Care
12.7.4 Setup confirmation
12.7.5 Calling the maintenance
12.7.6 Calling the center from the administrator
12.7.7 Checking the transmission log
12.7.8 Detail on settings
12.7.9 List of the CS Remote Care error code
12.7.10 Troubleshooting for CS Remote Care
12.7.11 CS Remote Care Operation under Enhanced Security Mode
12.8 System 1
12.8.1 Marketing Area
12.8.2 Tel/Fax Number
12.8.3 Serial Number
12.8.4 Sleep ON/OFF Choice Setting
12.8.5 Foolscap Size Setting
12.8.6 Original Size Detection
12.8.7 Install Date
12.8.8 Initialization-Clear All Data
12.8.9 Initialization-Clear Individual Data
12.8.10 Initialization-System Error Clear
12.8.11 Charging CH cleaning-K Charge Manual Cleaning
12.8.12 Charging CH cleaning-K Charge A/C ON/OFF Setting
12.8.13 Problem Unit Isolation Set
12.8.14 Post card transfer table
12.8.15 Change Warm Up Time
12.8.16 Machine State LED Setting
12.9 System 2
12.9.1 HDD
12.9.2 Image Controller Setting
12.9.3 Option Board Status
12.9.4 Consumable Life Reminder
12.9.5 Unit Change
12.9.6 Software Switch Setting
12.9.7 Software Switch Setting-Setting items in the software switch setting
12.9.8 CCD Calibration
12.9.9 LCC Size Setting
12.9.10 LCT Paper Size Setting
12.9.11 Line Mag Setting
12.9.12 Data Capture
12.9.13 ADF Scan Glass Contamin. Set
12.9.14 ADF Scan Glass Contamin. Set.-ADF Scan Glass Contamin. Sensitivity
12.9.15 ADF Scan Glass Contamin. Set.-ADF Scan Glass Contamin. Warn/Level
12.9.16 ADF Scan Glass Contamin. Set.-Feed Cleaning Setting
12.9.17 Stamp
12.9.18 ADF Scan Glass Contamin. Set.-Display Timing (bizhub C652DS/C552DS only)
12.9.19 Network Fax Settings
12.9.20 Image Stabilization Setting
12.9.21 User Paper Settings
12.9.22 Coverage Rate Screen
12.9.23 JAM Code Display Setting
12.9.24 BootUp Screen
12.9.25 Install Data
12.9.26 Bluetooth Settings
12.9.27 CIS Image Adjustment
12.10 Counter
12.10.1 Common procedure
12.10.2 Life
12.10.3 Service Call Counter
12.10.4 Section Service Call
12.10.5 Warning
12.10.6 Maintenance
12.10.7 Service Total
12.10.8 Counter of Each Mode
12.10.9 Service Call History (Data)
12.10.10 ADF Paper Pages
12.10.11 Paper Jam History
12.10.12 Fax Connection Error
12.10.13 ADF Scan Glass Contamin. Counter
12.10.14 Parts Counter (Fixed)
12.10.15 Jam
12.10.16 Section JAM
12.11 List Output
12.11.1 Batch List CSV Output
12.11.2 Machine Management List
12.11.3 Adjustment List
12.11.4 Parameter List
12.11.5 Service Parameter
12.11.6 Protocol Trace
12.11.7 Fax Setting List
12.11.8 Fax Analysis List
12.12 State Confirmation
12.12.1 Sensor Check
12.12.2 Sensor check screens
12.12.3 Sensor check list
12.12.4 Table Number
12.12.5 Level History1
12.12.6 Level History 2
12.12.7 Temp. & Humidity
12.12.8 CCD Check
12.12.9 Memory/HDD Adj.-Memory Check
12.12.10 Memory/HDD Adj.-Compress / Decompression Check
12.12.11 Memory/HDD Adj.-JPEG Check
12.12.12 Memory/HDD Adj.-Memory Bus Check
12.12.13 Memory/HDD Adj.-DSC Bus Check
12.12.14 Memory/HDD Adj.-HDD R/W Check
12.12.15 Memory/HDD Adj.-HDD Format
12.12.16 Memory/HDD State
12.12.17 Color Regist
12.12.18 IU Lot No
12.12.19 Adjustment Data List
12.13 Test Mode
12.13.1 Procedure for test pattern output
12.13.2 Gradation Pattern
12.13.3 Halftone Pattern
12.13.4 Lattice Pattern
12.13.5 Solid Pattern
12.13.6 Color Sample
12.13.7 8 Color Solid Pattern
12.13.8 CMM pattern
12.13.9 Paper Passage Test
12.13.10 Fax Test
12.14 ADF
12.14.1 Original Stop Position
12.14.2 Registration Loop Adj
12.14.3 Auto Stop Position Adjustment
12.14.4 Paper Passage
12.14.5 Sensor Check
12.14.6 Original Tray Width
12.14.7 Read Pos Adj
12.14.8 FD-Mag. Adj. (F)
12.14.9 Scanning Light Adjustment
12.14.10 Mixed original Size adjustment
12.14.11 Home Read Position Adjust
12.14.12 FD-Mag. Adj. (B)
12.14.13 Main Scanning Direction Zoom
12.15 FAX
12.16 Finisher
12.16.1 FS-FN adjustment – Center Staple Position
12.16.2 FS-FN adjustment – Half-Fold Position
12.16.3 FS-FN adjustment – Punch Centering Fine Adj
12.16.4 FS-FN adjustment – Punch Edge Adj
12.16.5 FS-FN adjustment – Punch F. Sensor Intensity Adj
12.16.6 FS-FN adjustment – Punch vertical position (Z-fold)
12.16.7 FS-FN adjustment – Punch horizontal position (Z-fold)
12.16.8 FS-FN adjustment – Punch regist adj. (Z-fold)
12.16.9 FS-FN adjustment – Punch Registration Loop Adj
12.16.10 FS-FN adjustment – Punch Resist Loop Size (PI)
12.16.11 FS-FN adjustment – 1st Z-Fold Position
FS-FN adjustment – 2nd Z-Fold Position
12.16.12 FS-FN adjustment – Tri-Fold Position
12.16.13 FS-FN adjustment – Center-Staple Pitch Adj
12.16.14 FS-FN adjustment – PI Size Detection
12.16.15 FS-FN adjustment – Post Inserter Adjustment
12.16.16 FS-FN adjustment – Finisher Components Test Mode
12.16.17 FS-FN adjustment – Load Data
12.16.18 FS-FN adjustment – Paper Alignment Guides W. Adj
12.16.19 FS-FN adjustment – Punch unit edge detection
12.16.20 Max Staple Limit Setting
12.16.21 Punch Option Setting
12.16.22 Max. # of Folded Sheets Setting
12.16.23 Job Separator
12.17 Internet ISW
12.17.1 Internet ISW Set
12.17.2 HTTP Setting
12.17.3 HTTP Setting-Data Input Setting
12.17.4 HTTP Setting-Connect Proxy
12.17.5 HTTP Setting-Proxy Server
12.17.6 HTTP Setting-Proxy Authentication
12.17.7 HTTP Setting-Connection Time-Out
12.17.8 FTP Setting
12.17.9 FTP Setting-Data Input Setting
12.17.10 FTP Setting-Connect Proxy
12.17.11 FTP Setting-Proxy Server
12.17.12 FTP Setting-Connection Setting
12.17.13 Forwarding Access Setting-User ID
12.17.14 Forwarding Access Setting-Password
12.17.15 Forwarding Access Setting-URL
12.17.16 Forwarding Access Setting-FileName
12.17.17 Download
13. ENHANCED SECURITY
13.1 List of Enhanced Security
13.2 Starting/Exiting
13.2.1 Starting procedure
13.2.2 Exiting procedure
13.3 Enhanced Security
13.3.1 CE Password
13.3.2 Administrator Password
13.3.3 Administrator Feature Level
13.3.4 CE Authentication
13.3.5 IU Life Stop Setting
13.3.6 NVRAM Data Backup
13.3.7 Operation Ban release time
13.3.8 Administrator unlocking
13.3.9 Engine FW DipSW
14. BILLING SETTING
14.1 List of billing setting
14.2 Starting/Exiting
14.2.1 Starting procedure
14.2.2 Exiting procedure
14.3 Billing Setting
14.3.1 Counter Setting
14.3.2 Management Function Choice
14.3.3 Management Function Choice-Key Counter IF Vendor
14.3.4 Management Function Choice-Authentication Device 1
14.3.5 Management Function Choice-Authentication Device 2
14.3.6 Management Function Choice-Key Counter Only
14.3.7 Management Function Choice-Management Device 1
14.3.8 Management Function Choice-Management Device 2
14.3.9 Management Function Choice-Vendor 1
14.3.10 Management Function Choice-Vendor 2
14.3.11 Coverage Rate Clear
14.3.12 OpenAPI Authentication Management-Restriction Code
14.3.13 OpenAPI Authentication Management-Region Code
15. CONTENTS TO BE CLEARED BY RESET FUNCTION
16. MECHANICAL ADJUSTMENT
16.1 Mechanical adjustment of the scanner section
16.1.1 Adjustment of the scanner motor belt
16.1.2 Focus positioning of the scanner and mirrors unit
16.1.3 Scanner position adjustment
16.1.4 Adjusting the height of the original glass moving unit
16.1.5 Adjusting the height of the guide support for the original glass moving unit
16.2 Mechanical adjustment of the paper feed section
16.2.1 Tray3/4 paper size change
16.2.2 Skew adjustment of the tray 1/2
16.2.3 Centering adjustment of the tray 1/2
16.2.4 Centering adjustment of the tray 3/4
16.2.5 Pick-up roller load adjustment of the tray 3/4
16.3 Mechanical adjustment of the bypass tray section
16.3.1 Adjustment of the bypass paper size unit
16.4 Mechanical adjustment of the main drive unit section
16.4.1 PC drive gear positioning adjustment

TROUBLESHOOTING
17. JAM DISPLAY
17.1 List of JAM code
17.1.1 Misfeed display resetting procedure
17.2 Sensor layout
17.2.1 Main body
17.2.2 ADF (bizhub C652/C552/C452: DF-618)
17.2.3 ADF (bizhub C652DS/C552DS: DF-619)
17.2.4 LU-204/LU-301
17.2.5 JS-504
17.2.6 ZU-606
17.2.7 FS-526/SD-508/PK-516
17.2.8 JS-602
17.2.9 PI-505
17.2.10 FS-527/SD-509/PK-517/JS-603
17.3 Solution
17.3.1 Initial check items
17.3.2 Misfeed at manual bypass feed section
17.3.3 Misfeed at tray 1 feed section
17.3.4 Misfeed at tray 2 feed section
17.3.5 Misfeed at tray 3 feed section
17.3.6 Misfeed at tray 4 feed section
17.3.7 Misfeed at tray 3/4 horizontal transport section
17.3.8 Misfeed at tray 3/4 intermediate transport roller section
17.3.9 LCT feed section
17.3.10 LCT transport section
17.3.11 Misfeed at vertical transport section
17.3.12 Misfeed at 2nd image transfer section
17.3.13 Misfeed at exit section
17.3.14 ADF turnover section
17.3.15 ADF paper feed section
17.3.16 ADF middle conveyance section
17.3.17 ADF transport section
17.3.18 ADF paper exit section
17.3.19 ADF image reading section
17.3.20 Code: 72-11
17.3.21 Code: 72-13
17.3.22 Code: 72-14
17.3.23 Code: 72-15
17.3.24 Code: 72-16
17.3.25 Code: 72-17
17.3.26 Code: 72-18
17.3.27 Code: 72-19
17.3.28 Code: 72-21
17.3.29 Code: 72-22
17.3.30 Code: 72-23
17.3.31 Code: 72-25 / 72-26
17.3.32 Code: 72-31 / 72-34
17.3.33 Code: 72-35
17.3.34 Code: 72-38
17.3.35 Code: 72-39
17.3.36 Code: 72-40
17.3.37 Code: 72-41 / 72-42
17.3.38 Code: 72-43
17.3.39 Code: 72-44
17.3.40 Code: 72-45
17.3.41 Code: 72-46
17.3.42 Code: 72-47
17.3.43 Code: 72-49
17.3.44 Code: 72-50
17.3.45 Code: 72-51
17.3.46 Code: 72-60
17.3.47 Code: 72-61
17.3.48 Code: 72-62
17.3.49 Code: 72-64
17.3.50 Code: 72-81
17.3.51 Code: 72-84
17.3.52 Code: 72-85
17.3.53 Code: 72-86
17.3.54 Code: 72-87
17.3.55 Code: 72-90
17.3.56 Code: 75-42
17.3.57 Code: 75-43
17.3.58 Misfeed at duplex pre-registration section
17.3.59 Misfeed at duplex transport section
18. MALFUNCTION CODE
18.1 Display procedure
18.2 List
18.3 Solution
18.3.1 S-1: CCD gain adjustment failure
18.3.2 S-2: CIS gain adjustment failure
18.3.3 D-1: Split line detect
18.3.4 D-2: ADF read guide trouble
18.3.5 D-3: Split line detect (Back Side)
18.3.6 P-5: IDC sensor (front) failure
18.3.7 P-28 IDC sensor (rear) failure
18.3.8 P-6: Cyan imaging unit failure
18.3.9 P-7: Magenta imaging unit failure
18.3.10 P-8: Yellow imaging unit failure
18.3.11 P-9: Black imaging unit failure
18.3.12 P-14: Skew correction trouble
18.3.13 P-16: PC charge cleaning trouble 1
18.3.14 P-18: PC charge cleaning trouble 2
18.3.15 P-21: Color regist test pattern failure
18.3.16 P-22: Color regist adjust failure
18.3.17 P-27: Secondary transfer ATVC failure
18.3.18 P-31: PC home sensor (K) malfunction
18.3.19 P-32: Heating roller temperature sensor /1 temperature detection failure
19. TROUBLE CODE
19.1 Display procedure
19.2 Trouble resetting procedure
19.2.1 Trouble resetting procedure by Trouble Reset key
19.3 Trouble isolation function
19.4 List
19.5 Solution
19.5.1 C0104: Tray 3/4 feeder transportation motor failure to turn
19.5.2 C0105: Tray 3/4 feeder transportation motor turning at abnormal timing
19.5.3 C0202: Tray 1 feeder up/down abnormality
19.5.4 C0204: Tray 2 feeder up/down abnormality
19.5.5 C0206: Tray 3 feeder up/down abnormality
19.5.6 C0208: Tray 4 feeder up/down abnormality
19.5.7 C0216: LCT up/down abnormality
19.5.8 C0301: Suction fan motor’s failure to turn
19.5.9 C0351: Paper cooling fan trouble
19.5.10 C1003: PK communication error
19.5.11 C1004: FNS communication error
19.5.12 C1005: ZU communication error
19.5.13 C1081: SD communication error
19.5.14 C1102: Main tray Up/Down motor malfunction
19.5.15 C1103: Side-staple front adjust drive motor malfunction
19.5.16 C1104: Paper exit roller drive motor malfunction
19.5.17 C1105: Paper exit auxiliary roller motor malfunction
19.5.18 C1106: Side-staple stapler drive malfunction
19.5.19 C1109: Side-staple stapler motor drive malfunction
19.5.20 C1110: Center-staple head roller motor malfunction
19.5.21 C1112: Center-staple clinch roller motor malfunction
19.5.22 C1113: Center-staple lead edge stopper motor malfunction
19.5.23 C1114: Center-staple front adjust drive motor malfunction
19.5.24 C1115: Center-staple knife drive motor malfunction
19.5.25 C1116: Center-staple transfer motor malfunction
19.5.26 C1124: Sheet feeder up/down drive failure (lower)
19.5.27 C1125: Sheet feeder up/down drive failure (upper)
19.5.28 C1127: Punch shift motor drive malfunction
19.5.29 C1130: 1st stopper motor drive malfunction
19.5.30 C1131: 2nd folding stopper motor drive malfunction
19.5.31 C1132: Output OP punch driving motor malfunction
19.5.32 C1133: Punch shift motor drive malfunction
19.5.33 C1134: Main motor cooling fan drive malfunction
19.5.34 C1135: Punch motor drive malfunction
19.5.35 C1136: Punch switchover motor drive malfunction
19.5.36 C1140: Side-staple rear adjust drive motor malfunction
19.5.37 C1141: Side-staple paddle roller motor malfunction
19.5.38 C1142: Side-staple trailing paddle up-down motor malfunction
19.5.39 C1143: Side-staple rewinding paddle up-down motor malfunction
19.5.40 C1144: Spare stacker board drive motor malfunction
19.5.41 C1145: End stopper drive motor malfunction
19.5.42 C1150: Center-staple rear adjust drive motor malfunction
19.5.43 C1151: Center-staple stapler drive motor malfunction
19.5.44 C1152: Center-staple paper exit motor malfunction
19.5.45 C1153: Center-staple paddle up-down motor malfunction (trailing edge)
19.5.46 C1156: Center-staple paddle roller motor malfunction (trailing edge)
19.5.47 C1157: Center-staple paddle roller motor malfunction (middle)
19.5.48 C1182: Shift motor drive malfunction
19.5.49 C1183: Elevate drive malfunction
19.5.50 C1190: Alignment plate motor drive malfunction
19.5.51 C1194: Leading edge stopper motor drive malfunction
19.5.52 C11A1: Tray 2 exit roller pressure/ retraction malfunction
19.5.53 C11A2: Accommodation roller pressure/ retraction malfunction
19.5.54 C11A7: Tray 3 exit roller pressure/ retraction malfunction
19.5.55 C11B0: Stapler movement drive malfunction
19.5.56 C11B2: Staple drive malfunction
19.5.57 C11B5: Saddle stapler drive malfunction
19.5.58 C11C0: Punch motor drive malfunction
19.5.59 C11E0: Duplex path switching motor drive malfunction / Finisher route change malfunction
19.5.60 C11E1: Upper lower path switching motor drive malfunction
19.5.61 C11E2: Tray1 path switching motor drive malfunction
19.5.62 C2101: PC charge cleaning malfunction
19.5.63 C2151: Secondary transfer roller pressure welding alienation
19.5.64 C2152: Transfer belt pressure welding alienation
19.5.65 C2160: PC charge (C) malfunction
19.5.66 C2161: PC charge (M) malfunction
19.5.67 C2162: PC charge (Y) malfunction
19.5.68 C2163: PC charge (K) malfunction
19.5.69 C2164: PC charge malfunction
19.5.70 C2204: Waste toner agitating motor’s failure to turn
19.5.71 C2253: Color PC drum motor’s failure to turn
19.5.72 C2254: Color PC drum motor’s turning at abnormal timing
19.5.73 C2255: Color developing motor’s failure to turn
19.5.74 C2256: Color developing motor’s turning at abnormal timing
19.5.75 C2257: Cleaner motor’s failure to turn
19.5.76 C2258: Cleaner motor’s turning at abnormal timing
19.5.77 C2259: K developing motor’s failure to turn
19.5.78 C225A: K developing motor’s turning at abnormal timing
19.5.79 C225B: K PC drum motor’s failure to turn
19.5.80 C225C: K PC drum motor’s turning at abnormal timing
19.5.81 C2350: Toner suction fan motor’s failure to turn
19.5.82 C2353: IU cooling fan motor’s failure to turn
19.5.83 C2354: Rear side cooling fan motor’s failure to turn
19.5.84 C2551: Abnormally low toner density detected cyan TCR sensor
19.5.85 C2553: Abnormally low toner density detected magenta TCR sensor
19.5.86 C2555: Abnormally low toner density detected yellow TCR sensor
19.5.87 C2552: Abnormally high toner density detected cyan TCR sensor
19.5.88 C2554: Abnormally high toner density detected magenta TCR sensor
19.5.89 C2556: Abnormally high toner density detected yellow TCR sensor
19.5.90 C2557: Abnormally low toner density detected black TCR sensor
19.5.91 C2558: Abnormally high toner density detected black TCR sensor
19.5.92 C2559: Cyan TCR sensor adjustment failure
19.5.93 C255A: Magenta TCR sensor adjustment failure
19.5.94 C255B: Yellow TCR sensor adjustment failure
19.5.95 C255C: Black TCR sensor adjustment failure
19.5.96 C2561: Cyan TCR sensor failure
19.5.97 C2562: Magenta TCR sensor failure
19.5.98 C2563: Yellow TCR sensor failure
19.5.99 C2564: Black TCR sensor failure
19.5.100 C2650: Main backup media access error
19.5.101 C2651: EEPROM access error (Imaging unit/C)
19.5.102 C2652: EEPROM access error (Imaging unit/M)
19.5.103 C2653: EEPROM access error (Imaging unit/Y)
19.5.104 C2654: EEPROM access error (Drum unit/K)
19.5.105 C2A14: Drum unit/K new release failure
19.5.106 C2A21: Toner cartridge/C new release failure
19.5.107 C2A22: Toner cartridge/M new release failure
19.5.108 C2A23: Toner cartridge/Y new release failure
19.5.109 C2A24: Toner cartridge/K new release failure
19.5.110 C3101: Fusing roller separation failure
19.5.111 C3102: Fusing roller failure to turn
19.5.112 C3201: Fusing motor failure to turn
19.5.113 C3202: Fusing motor turning at abnormal timing
19.5.114 C3303: Fusing cooling fan motor/ 1 failure to turn
19.5.115 C3304: Fusing cooling fan motor/ 2 failure to turn
19.5.116 C3305: Fusing cooling fan motor/ 3 failure to turn
19.5.117 C3424: Fusing heaters trouble (soaking side)
19.5.118 C3425: Fusing heaters trouble (NC sensor)
19.5.119 C3721: Fusing abnormally high temperature detection (Center of the heating roller)
19.5.120 C3722: Fusing abnormally high temperature detection (Edge of the heating roller)
19.5.121 C3725: Fusing abnormally high temperature detection (NC sensor)
19.5.122 C3724: Fusing abnormally high temperature detection (soaking side)
19.5.123 C3822: Fusing abnormally low temperature detection (Edge of the heating roller)
19.5.124 C3825: Fusing abnormally low temperature detection (NC sensor)
19.5.125 C3824: Fusing abnormally low temperature detection (soaking side)
19.5.126 C3921: Fusing sensor wire breaks detection (Center of the heating roller)
19.5.127 C3922: Fusing sensor wire breaks detection (Edge of the heating roller)
19.5.128 C3925: Fusing sensor wire breaks detection (NC sensor)
19.5.129 C3924: Fusing sensor wire breaks detection (soaking side)
19.5.130 C392A: Fusing sensor contamination (NC sensor)
19.5.131 C3B02: IH malfunction (CPU)
19.5.132 C3B03: IH malfunction (monitor)
19.5.133 C3B05: IH temperature sensor defect
19.5.134 C3B06: IH surge error
19.5.135 C3B07: IH input power error
19.5.136 C3B08: IH input voltage error
19.5.137 C4101: Polygon motor rotation trouble
19.5.138 C4301: PH cooling fan motor failure to turn
19.5.139 C4501: Laser malfunction
19.5.140 C5104: Transfer belt motor’s failure to turn
19.5.141 C5105: Transfer belt motor’s turning at abnormal timing
19.5.142 C5304: IH cooling fan motor/1’s failure to turn
19.5.143 C5306: IH cooling fan motor/2’s failure to turn
19.5.144 C5351: Power supply cooling fan motor/1’s failure to turn
19.5.145 C5354: Ozone ventilation fan motor’s failure to turn
19.5.146 C5356: Cooling fan motor’s failure to turn
19.5.147 C5370: MFP control board cooling fan motor’s failure to turn
19.5.148 C5372: MFP control board CPU temperature failure
19.5.149 C6001: ADF related configuration error 1
19.5.150 C6002: ADF related configuration error 2
19.5.151 C6102: Drive system home sensor malfunction
19.5.152 C6103: Slider over running
19.5.153 C6104: Opposed board home sensor abnormality (initial)
19.5.154 C6105: Opposed board home sensor abnormality (normal)
19.5.155 C6301: Optical cooling fan motor’s failure to turn
19.5.156 C6303: CIS cooling fan motor’s failure to turn
19.5.157 C6704: Image input time out
19.5.158 C6751: CCD clamp/gain adjustment failure
19.5.159 C6752: ASIC clock input error (front side)
19.5.160 C6753: ASIC clock input error (back side)
19.5.161 C6754: CIS clamp adjustment failure
19.5.162 C6755: CIS gain adjustment failure
19.5.163 C6901: DSC board mount failure 1
19.5.164 C6902: DSC board bus check NG1-1
19.5.165 C6903: DSC board bus check NG1-2
19.5.166 C6911: DSC board mount failure 2
19.5.167 C6912: DSC board bus check NG2-1
19.5.168 C6913: DSC board bus check NG2-2
19.5.169 C6F01: Scanner sequence trouble 1
19.5.170 C8101: Before reading pressure welding alienation mechanism
19.5.171 C8102: Turn around pressure welding alienation trouble
19.5.172 C8103: Lift up mechanism trouble (Upward movement)
19.5.173 C8104: Glass movement trouble
19.5.174 C8106: Lift up mechanism failure (Downward movement)
19.5.175 C8107: Glass cleaning mechanism trouble
19.5.176 C8302: Cooling fan failure
19.5.177 C8401: EEPROM failure
19.5.178 C9401: Exposure turning on the lamp trouble detection
19.5.179 C9402: Exposure turning on the lamp abnormally detection
19.5.180 C9403: CIS exposure turning on the lamp trouble detection
19.5.181 C9404: CIS exposure turning on the lamp abnormally detection
19.5.182 CA051: Standard controller configuration failure
19.5.183 CA052: Controller hardware error
19.5.184 CA053: Controller start failure
19.5.185 CC001: Vendor connection failure
19.5.186 CC151: ROM contents error upon startup (MSC)
19.5.187 CC152: ROM contents error upon startup (Scanner)
19.5.188 CC153: ROM contents error upon startup (PRT)
19.5.189 CC155: Finisher ROM error
19.5.190 CC156: ADF ROM error
19.5.191 CC157: Finisher ROM error (RU)
19.5.192 CC158: Finisher ROM error (ZU)
19.5.193 CC159: ROM contents error upon startup (DSC1)
19.5.194 CC15A: ROM contents error upon startup (DSC2)
19.5.195 CC15B: Finisher ROM error (SD)
19.5.196 CC163: ROM contents error (PRT)
19.5.197 CC164: ROM contents error (MSC)
19.5.198 CC165: ROM contents error (ADF)
19.5.199 CC170: Dynamic link error during starting (AP0)
19.5.200 CC171: Dynamic link error during starting (AP1)
19.5.201 CC172: Dynamic link error during starting (AP2)
19.5.202 CC173: Dynamic link error during starting (AP3)
19.5.203 CC174: Dynamic link error during starting (AP4)
19.5.204 CC180: Dynamic link error during starting (LDR)
19.5.205 CC181: Dynamic link error during starting (IBR)
19.5.206 CC182: Dynamic link error during starting (IID)
19.5.207 CC183: Dynamic link error during starting (IPF)
19.5.208 CC184: Dynamic link error during starting (IMY)
19.5.209 CC185: Dynamic link error during starting (SPF)
19.5.210 CC186: Dynamic link error during starting (OAP)
19.5.211 CC190: Outline font load error
19.5.212 CC191: Setting parameter load error
19.5.213 CD002: JOB RAM save error
19.5.214 CD004: Hard disk access error (connection failure)
19.5.215 CD00F: Hard disk data transfer error
19.5.216 CD020: Hard disk verify error
19.5.217 CD010: Hard disk unformat
19.5.218 CD011: Hard disk out of specifications mounted
19.5.219 CD041 to CD046: HDD command execution error Address Mark Not Found
19.5.220 CD047 to CD04B: HDD SCSI library error
19.5.221 CD201: File memory mounting error
19.5.222 CD202: Memory capacity discrepancy
19.5.223 CD203: Memory capacity discrepancy 2
19.5.224 CD211: PCI-SDRAM DMA operation failure
19.5.225 CD212: Compression/extraction timeout detection
19.5.226 CD231: No Fax memory at FAX board mounting
19.5.227 CD241: Encryption ASIC setting error
19.5.228 CD242: EncryptionASIC mounting error
19.5.229 CD252: No relay circuit boards for IC-412 mounting at IC-412 mount setting
19.5.230 CD261: USB host board failure
19.5.231 CD271: i-Option activated and additional memory not installed
19.5.232 CD272: i-Option activated and additional memory and HDD not installed
19.5.233 CD401: NACK command incorrect
19.5.234 CD402: ACK command incorrect
19.5.235 CD403: Checksum error
19.5.236 CD404: Receiving packet incorrect
19.5.237 CD405: Receiving packet analysis error
19.5.238 CD406: ACK receiving timeout
19.5.239 CD407: Retransmission timeout
19.5.240 CE001: Abnormal message queue
19.5.241 CE003: Task error
19.5.242 CE004: Event error
19.5.243 CE005: Memory access error
19.5.244 CE006: Header access error
19.5.245 CE007: DIMM initialize error
19.5.246 CD3##: NVRAM data error
19.5.247 CE002: Message and method parameter failure
19.5.248 CEEE1: MFP board malfunction
19.5.249 CEEE2: Scanner section malfunction
19.5.250 CEEE3: Printer control board malfunction
19.5.251 CFB00 to CFFA0: Abort code
20. NETWORK ERROR CODE
20.1 Display procedure
20.2 List
21. POWER SUPPLY TROUBLE
21.1 Machine is not energized at all (DCPU operation check)
21.2 Fusing heaters do not operate
21.3 Power is not supplied to ADF
21.3.1 bizhub C652/C552/C452: FDF-618
21.3.2 bizhub C652DS/C552DS: DF-619
21.4 Power is not supplied to option
21.4.1 LU-204/301
21.4.2 FS-526/527
22. IMAGE QUALITY PROBLEM
22.1 How to read element date
22.1.1 Table number
22.1.2 Level history 1
22.1.3 Level history 2
22.2 How to identify problematic part
22.2.1 Initial check items
22.3 Solution
22.3.1 Scanner system: white lines, white bands, colored lines and colored bands in sub scan direction
22.3.35 Printer 4-color: colored spots
22.3.36 Printer 4-color: poor fusing performance, offset
22.3.37 Printer 4-color: brush effect, blurred image
22.3.38 Printer 4-color: back marking
22.3.39 Printer 4-color: uneven image
23. IC protector
23.1 Outline
23.2 IC protector list
23.2.1 Main body
23.2.2 DF-618
23.2.3 DF-619
23.2.4 LU-301/LU-204
23.2.5 JS-504
23.2.6 ZU-606
23.2.7 FS-526
23.2.8 SD-508
23.2.9 PK-516
23.2.10 PI-505
23.2.11 FS-527
23.2.12 SD-509

APPENDIX
24. PARTS LAYOUT DRAWING
24.1 Main body
24.1.1 Scanner section
24.1.2 Front side
24.1.3 Back side
24.1.4 Around the write section
24.1.5 Manual bypass tray
24.1.6 Tray 1
24.1.7 Tray 2
24.1.8 Tray 3
24.1.9 Tray 4
24.1.10 2nd transfer section
24.1.11 Duplex section
24.1.12 Fusing/paper exit section
24.2 DF-618/SP-501 (bizhub C652/C552/C452)
24.3 DF-619/SP-501 (bizhub C652DS/C552DS)
24.4 LU-301 (Option)
24.5 LU-204 (Option)
24.6 JS-504 (Option)
24.7 JS-603 (Option)
24.8 ZU-606 (Option)
24.9 OT-503 (Option)
24.10 FS-526 (Option)
24.11 SD-508 (Option)
24.12 PK-516 (Option)
24.13 JS-602 (Option)
24.14 PI-505 (Option)
24.15 FS-527 (Option)
24.16 SD-509 (Option)
24.17 PK-517 (Option)
25. CONNECTOR LAYOUT DRAWING
25.1 Main body
25.1.1 Printer control board (PRCB)
25.1.2 MFP board (MFPB)
25.1.3 PCI board (PCIB)
25.1.4 Paper feed/transport drive board (PFTDB)
25.1.5 PH relay board (REYB/PH)
25.1.6 Scanner relay board (REYB/SCAN)
25.1.7 Original glass position control board (OGPCB) (bizhub C652/C552/C452 only)
25.1.8 DS image processing board (DSIPB) (bizhub C652DS/C552DS only)
25.1.9 DF control board (DFCB)
25.1.10 LU drive board (LUDB)
25.1.11 Punch control board (PKDB)
25.1.12 ZU control board
25.1.13 FS control board (FSCB)
25.1.14 Interlock board (IRB)
25.1.15 SD drive board (SDDB)
25.1.16 PI drive board
26. RELAY CONNECTOR LAYOUT DRAWING
26.1 How to read the relay connector layout drawing
26.2 Main body
27. TIMING CHART
27.1 Main body
27.1.1 Timing chart in color mode
27.2 DF-618
27.2.1 1-sided mode
27.2.2 2-sided mode
27.3 DF-619
27.3.1 1-sided mode
27.3.2 2-sided mode
27.4 LU-204
27.5 FS-526/SD-508
27.5.1 Straight paper exit mode
27.5.2 2 flat stitching staples mode
27.5.3 Saddle stitching mode
27.5.4 Tri-folding mode
27.6 ZU-606
27.6.1 Z-folding+Punch mode
27.7 FS-527/SD-509/PK-517
27.7.1 Shift mode
27.7.2 2 flat stitching staples mode
27.7.3 Center staples mode
27.7.4 Punch mode
27.8 JS-603
27.8.1 Tray3 paper exit mode

Number of pages: 1602.