Konica Minolta Bizhub Pro C6500 Bizhub Pro C6500P Bizhub Pro C5500 Theory of Operation Manual

Theory of Operation Manual Konica Minolta Bizhub Pro C6500 Bizhub Pro C6500P Bizhub Pro C5500;
This manual is in the PDF format you can print, zoom or read any diagram, picture or page from this Theory of Operation Manual.
To see what contain, please read table of contents:

OUTLINE
1. SYSTEM CONFIGURATION
2. PRODUCT SPECIFICATIONS
3. UNIT CONFIGURATION
4. PAPER PATH

CONFIGURATION/OPERATION
5. CONTROL BLOCK DIAGRAM
6. IMAGE CREATING PROCESS
6.1 Flow and functions
6.2 Charging process (Step 1)
6.3 Laser exposure process (Step 2)
6.4 Image development process (Step 3)
6.5 First transfer process (Step 4)
6.6 Second transfer process (Step 5)
6.7 Separation process (Step 6)
6.8 Drum cleaning (Sub step 1)
6.9 Exposure before charging (Sub step 2)
6.10 Transfer belt cleaning (Sub step 3)
6.11 Second transfer roller/Lw cleaning (Sub step 4)
6.12 Toner collection (Sub step 5)
6.13 Process speed
7. SCANNER SECTION
7.1 Configuration
7.2 Drive
7.3 Operation
7.3.1 Scanner/Exposure lamp control
7.3.2 Original size detection control
7.3.3 Original reading area
7.3.4 AE/ACS control
7.3.5 Image processing
8. WRITE SECTION
8.1 Configuration
8.2 Operation
8.2.1 Laser beam path
8.2.2 Write unit control
8.2.3 Color registration control
8.2.4 Front/back sides skew correction in main scan direction
8.2.5 Back side magnification adjustment in sub scan direction
8.2.6 Image stabilization control
9. PHOTOCONDUCTOR SECTION
9.1 Configuration
9.2 Drive
9.3 Operation
9.3.1 Image creation control
9.3.2 Erase lamp (EL) control
9.3.3 Image stabilization control
10. CHARGING SECTION
10.1 Configuration
10.2 Operation
10.2.1 Charging control
11. INTERMIDIATE TRANSFER SECTION
11.1 Configuration
11.2 Drive
11.2.1 Transfer belt conveyance/pressure drive
11.2.2 Second transfer pressure/release drive
11.3 Operation
11.3.1 First transfer roller pressure/release mechanism
11.3.2 First transfer control
11.3.3 Second transfer mechanism
11.3.4 Second transfer control
11.3.5 Image correction unit shutter mechanism
11.3.6 Control of flip prevention for the belt cleaning blade
11.3.7 Control against belt filming
11.3.8 Image stabilization control
12. DEVELOPING SECTION
12.1 Configuration
12.2 Drive
12.3 Operation
12.3.1 Developer conveyance
12.3.2 Developing bias control
12.3.3 Developing suction control
12.3.4 Image stabilization control
13. TONER SUPPLY SECTION
13.1 Configuration
13.2 Drive
13.3 Operation
13.3.1 Toner conveyance control
13.3.2 Remaining toner detection control
13.3.3 Stop control for print operation with no toner
14. TONER COLLECTION SECTION
14.1 Configuration
14.2 Drive
14.3 Operation
14.3.1 Toner collection control
14.3.2 Toner collection box control
14.3.3 Box full control
15. PAPER FEED SECTION
15.1 Configuration
15.2 Drive
15.3 Operation
15.3.1 Plate up/down control
15.3.2 Paper size detection control
15.3.3 Paper feed control
15.3.4 Remaining paper detection control
16. BYPASS FEED TRAY SECTION
16.1 Configuration
16.2 Drive
16.3 Operation
16.3.1 Plate up/down control
16.3.2 Paper size detection control
16.3.3 Paper feed control
16.3.4 Paper empty detection control
16.3.5 Remaining paper detection control
17. VERTICAL CONVEYANCE SECTION
17.1 Configuration
17.2 Drive
17.3 Operation
17.3.1 Vertical conveyance control
18. REGISTRATION SECTION
18.1 Configuration
18.2 Drive
18.3 Operation
18.3.1 Loop control
18.3.2 Registration operation
18.3.3 Paper leading edge timing correction control
18.3.4 Registration speed correction control
19. ADU SECTION
19.1 Configuration
19.2 Drive
19.3 Operation
19.3.1 Paper reverse control
19.3.2 ADU conveyance control
19.3.3 Back side centering correction control
20. REVERSE/PAPER EXIT SECTION
20.1 Configuration
20.2 Drive
20.2.1 Reverse/paper exit drive
20.2.2 Paper exit drive/OT-502 drive
20.3 Operation
20.3.1 Conveyance control
20.3.2 Reverse/paper exit timing control
20.3.5 Paper exit full detection control
21. FUSING SECTION
21.1 Configuration
21.2 Drive
21.3 Operation
21.3.1 Fusing roller drive control
21.3.2 Pressure/release control
21.3.3 Fusing temperature control
21.3.4 Protection against abnormality
21.3.5 Fusing roller/Lw cooling control
22 INTERFACE SECTION
22.1 Configuration
22.2 Application
23. IMAGE STABILIZATION CONTROL
23.1 Outline
23.2 Operation flow
23.2.1 Image stabilizing controls when the sub power switch (SW2) is ON, during printing, and during idling
23.2.2 Image stabilizing controls when selecting the “Stability” in expert settings
23.2.3 Other Image stabilizing controls
24. IMAGE PROCESSING
24.1 Operation flow
24.2 Image type classification
25. OTHER CONTROLS
25.1 Power On control
25.1.1 Parts that operate when the main power switch (SW1) is turned on
25.1.2 Parts that operate when the sub power switch (SW2) is turned on
25.2 Fan control
25.2.1 Configuration
25.2.2 Operation
25.3 Counter control
25.3.1 Structure of counter
25.3.2 Counter operation
25.4 Dehumidifier heater control
25.5 ACS control
25.5.1 Switching from the color mode to the black-and-white mode
25.5.2 Count when using ACS

Number of pages: 809.