Oki MC362w/MC562w/MPS2731mc Service Manual and Parts List Manual

Service Manual and Parts List Manual Oki MC362w/MC562w/MPS2731mc;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Oki.
You can print, zoom or read any diagram, picture or page from this manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Oki MC362w/MC562w/MPS2731mc photocopier.
To see what contain, please read table of contents:

1.1 System configuration
1.2 Structure of MFP
1.3 Offer of Options
1.4 Specifications
1.5 Interface specifications
1.5.1 USB Interface Specification Outline of USB Interface USB Interface Connector and Cable USB Interface Signal
1.5.2 Network Interface Specification Outline of Network Interface Network Interface Connector and Cable Network Interface Signal
1.5.3 Telephone Line Interface Specification (MC342/MC362/MC562/MC342dw/MC362w/MC562dw) Outline of telephone Line Interface Telephone Line Interface Connector and Cable Telephone Line Interface signal
1.5.4 USB Host Interface Outline of USB Host Interface USB Host Interface Connector USB Host Interface Signal
1.5.5 Wireless LAN Interface (MC342w/MC352w)

2.1 Electrophotographic process mechanism
2.2 Printing process
2.3 Image Scanning process
2.3.1 Structure and process of RADF Cross-section view Electrical configuration Fundamental operations Document detection Jam detection
2.3.2 Document table structure Overview Exposure block Carraige-Assy drive mechanism

3.1 Precautions and Prohibition
3.2 MFP Unpacking Procedure
3.3 MFP Installation Instructions
3.4 Packed Units and Attachments
3.5 Assembly Procedure
3.5.1 MFP Main Body
3.5.2 Power Cable Connection
3.5.3 Installation of Optional Components Second Tray Unit Extension Memory Installation 16GB SD Memory card (MC562/MC562dw)
3.6 Configuration Page Print
3.7 Network Information Print
3.8 Connection Procedures
3.9 Checking of User Paper

4.1 Notes on replacement of parts
4.2 Part replacement procedure
4.2.1 Belt unit
4.2.2 Fuser unit
4.2.3 Left side cover
4.2.4 Right side cover
4.2.5 CU/PU board and low-voltage power supply
4.2.6 Front cover
4.2.7 Scanner unit Tray-assy-document / Cover-ADF-R-assy ADF-unit Sheet-document / Paper-weight-assy / Spring-PW-ADF Hinge-assy-L / Hinge-assy-R Cover-ADF-F / Guide-assy-exit-sub / ADF-assy / ADF board Cover-assy-top-ADF / Guide-assy / Roller / Motor / Clutch / Solenoid Guide-A-sub / Frame-assy-separator / Spring-separator / Rubber-friction Cable (ADF-Rev SNS) Cable (ADF-Reg SNS) Frame-assy-OP Frame-OP-panel / OPE board (MC562/MC562dw) Frame-OP-panel / OPE board (MC342/MC362/MC342dw/MC362w) Frame-OP-panel / OPE board (MC332/MC352) LCD-assy Frame-assy-FB How to remove Battery (SU Board) Frame-assy-hopping-ADF Setting of SW1 and SW2 on MHH board (SU Board)
4.2.8 Face-up tray
4.2.9 Rear cover
4.2.10 LED assembly. and LED assembly springs
4.2.11 Image drum fan and ZHJ board
4.2.12 Top cover assembly
4.2.13 Top cover and LED head cable assembly
4.2.14 MPT assembly
4.2.15 Front fan, hopping motor, rear fan, image drum motor and cover-open switch
4.2.16 High-voltage power supply board
4.2.17 Guide-ejection assembly, fuser connector assembly and color-registration assembly
4.2.18 Frame-MPT assembly and feeder assembly
4.2.19 Side-L assembly, side-R assembly and base assembly
4.2.20 Feed rollers
4.3 Locations to lubricate
4.3.1 ADF
4.3.2 Printer

5.1 Maintenance Menu
5.2 Service Bit Menu
5.3 Maintenance Utility
5.3.1 Maintenance Utility
5.3.2 Scanner Maintenance Tool
5.4 Self-diagnostic mode
5.4.1 Operator Panel
5.4.2 Normal self-diagnostic mode (level 1) Entering self-diagnostic mode (level 1) Exiting self-diagnostic mode
5.4.3 Switch scan test
5.4.4 Motor and clutch test
5.4.5 Test printing
5.4.6 Color registration adjustment test
5.4.7 Density adjustment test
5.4.8 Consumable counter display
5.4.9 Print counter display
5.4.10 Factory/Shipping mode setting
5.4.11 Self-diagnostic function setup
5.4.12 LED head serial number display
5.5 Switch pressing function when power supply is turned on
5.6 Settings after Parts Replacement
5.6.1 Notes on CU/PU board replacement
5.6.2 Notes on SU board/Scanner Unit replacement
5.7 Manual density adjustment operation

6.1 Recommended substitutes
6.2 Cleaning
6.3 Cleaning LED lens array
6.4 Cleaning the Paper Feed Roller
6.5 Cleaning the Paper Feed Rollers for MP Tray
6.6 Cleaning Rollers in the ADF
6.7 Cleaning the Document Glass

7.1 Precautions prior to repair
7.2 Items to be checked prior to taking action on abnormal images
7.3 Precautions when taking action on abnormal images
7.4 Preparations for troubleshooting
7.5 Troubleshooting method
7.5.1 LCD messages list
7.5.2 Service Call List
7.5.3 Fax Error List
7.5.4 Email/Internet FAX Error List
7.5.5 Preparing for troubleshooting
7.5.6 Image Problem Troubleshooting
7.5.7 Response after Flash compulsive initialization
7.5.8 Copy Image Abnormality Error Troubleshooting
7.5.9 Network Troubleshooting
7.5.10 Wireless Troubleshooting
7.6 Fuse Checking

8.1 Check of resistance values
8.2 Layout of parts
8.3 Firmware Information
8.3.1 ROM control numbers
8.3.2 Instruction of FW update
8.3.3 Checking and indication of the revision number
8.3.4 Stamp of maintenance board indication
9.1 List of Initialized range

Parts List Manual.

Oki MC362w MC562w MPS2731mc MC362 MC562 MPS2731 OkiMC362w OkiMC562w OkiMPS2731mc