Xerox Phaser 3635MFP WorkCentre 3550 Service Manual & Part List

Service Manual & Parts List Xerox Phaser 3635MFP WorkCentre 3550;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Xerox Phaser 3635MFP WorkCentre 3550 copier.
You can print, zoom or read any diagram, picture or page from this Service Manual & Parts List Manual. Every chapter on this manual is fully detailed and contain all theĀ  simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Xerox Phaser 3635MFP WorkCentre 3550 photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

INTRODUCTION
About This Manual
Change History
Warnings, Cautions And Notes
Safety Precautions
Health and Safety Incident reporting
Translation of Warnings

1. SERVICE CALL PROCEDURES
SCP 1 Initial Actions
SCP 2 First Call Actions
SCP 3 Normal Call Actions
SCP 4 Fault Analysis
SCP 5 Subsystem Maintenance
SCP 6 Final Actions
SCP 7 Machine Configurations and Options

2. STATUS INDICATOR RAPs

3. IMAGE QUALITY
Image Quality RAPs
IQ1 Image Quality Entry RAP
IQ2 Blank Copies RAP
IQ3 Black Copies or Prints RAP
IQ4 Blurred Image From the Scanner RAP
IQ5 Vertical Black Lines or Bands RAP
IQ6 Vertical White Lines RAP
IQ7 Light Image RAP
IQ8 Dark Image RAP
IQ9 Background RAP
IQ10 Ghost Images RAP
IQ11 Marks on Back of Paper RAP
IQ12 Poor Fusing RAP
IQ13 Partial Blank Image (Not Periodic) RAP
IQ14 Partial Blank Image (Periodic) RAP
IQ15 Different Image Density (Left and Right) RAP
IQ16 Horizontal Bands RAP
IQ17 Repeated Printing Defects Check RAP
IQ18 DADF Lead Edge Offset RAP
IQ19 Poor Registration RAP
IQ20 Skew RAP
Image Quality Specifications
IQS 1 Solid Area Density
IQS 2 Skew
IQS 3 Registration

4. REPAIRS / ADJUSTMENTS
REPs 1 – Standby Power
REP 1.1 SMPS
REP 1.2 HVPS
REPs 2 – User Interface
REP 2.1 User Interface Assembly (3635)
REP 2.2 UI PWB and Touch Screen (3635)
REP 2.3 User Interface Assembly (3550)
REPs 3 – Machine Run Control
REP 3.1 Main PWB
REP 3.2 USB host PWB and Harness
REPs 4 – Main Drives
REP 4.1 Main BLDC Motor
REPs 5 – DADF
REP 5.1 DADF Door Open Sensor
REP 5.2 DADF Lift Solenoid
REP 5.3 DADF Registration and Scan Sensors
REP 5.4 DADF Transport Assembly and DADF Feed Assembly
REP 5.5 DADF Drive Assembly
REP 5.6 DADF Paper Length Sensor
REP 5.7 Pickup Assembly
REPs 6 – LSU
REP 6.1 LSU
REP 6.2 LSU Interlock Switch
REPs 7 – Paper Supply
REP 7.1 Bypass Feed Assembly
REP 7.2 Registration Solenoid and Tray 1 Pickup Solenoid
REP 7.3 Bypass Pickup Roll Rubber
REP 7.4 Tray 2 Feed Motor and Pickup Solenoid
REP 7.5 Bypass Paper Empty Sensor
REPs 8 – Paper Transport
REP 8.1 Registration Roll Clutch
REPs 9 – Xerographics
REP 9.1 CRUM PWB
REPs 10 – Fusing and Copy/Print Transport
REP 10.1 Duplex Motor
REP 10.2 Exit Motor
REP 10.3 Front Duplex Guide Assembly
REP 10.4 Exit Roll and Exit Idler Assemblies
REP 10.5 Fuser Terminal
REP 10.6 Heat Lamp
REPs 14 – Scanner
REP 14.1 Scanner Assembly
REP 14.2 Scanner Components (3635)
REP 14.3 Scanner Components (3550)
REPs – 28 External Covers
REP 28.1 External Covers
REP 28.2 Outbin Assembly
REP 28.3 Front Mid Cover
ADJs 1 – Standby Power
ADJ 1.1 Machine Settings
ADJs 5 – Document Transport
ADJ 5.1 DADF Side Edge Registration Adjustment
ADJs 8 – Paper Transport
ADJ 8.1 Lead Edge Registration Adjustment
ADJ 8.2 Side Edge Registration Adjustment

5. PARTS LIST
PL 1 – Standby Power
PL 1.10 HVPS
PL 1.12 SMPS
PL 2 – User Interface
PL 2.10 User Interface (3635)
PL 2.11 User Interface (3550)
PL 3 – Machine Run Control
PL 3.10 Main PWB and Main Drive Assembly
PL 4 – Main Drive Assembly
PL 4.10 Main Drive Assembly
PL 5 – DADF
PL 5.10 DADF (1 of 7)
PL 5.15 DADF (2 of 7)
PL 5.20 DADF (3 of 7)
PL 5.25 DADF (4 of 7)
PL 5.30 DADF (5 of 7)
PL 5.35 DADF (6 of 7)
PL 5.40 DADF (7 of 7)
PL 6 – Imaging
PL 6.10 LSU
PL 7 – Paper Supply
PL 7.10 Bypass Feed Assembly (1 of 2)
PL 7.12 Bypass Feed Assembly (2 of 2)
PL 7.15 Front Cover Assembly
PL 8 – Paper Transport
PL 8.10 Paper Tray
PL 8.15 Tray 2 Assembly (1 of 2)
PL 8.17 Tray 2 Assembly (2 of 2)
PL 8.20 Rear Cover Assembly
PL 8.25 Registration Rolls
PL 9 – Print Cartridge
PL 9.10 Print Cartridge
PL 10 – Copy Transportation and Fusing
PL 10.10 Fuser Assembly (1 of 3)
PL 10.12 Fuser Assembly (2 of 3)
PL 10.15 Fuser Assembly (3 of 3)
PL 10.20 Duplex Drive Assembly
PL 10.22 Front Duplex Guide Assembly
PL 10.23 Duplex Assembly (1 of 3)
PL 10.25 Exit Feed Assembly
PL 10.30 Exit Cover Assembly
PL 11 – Finishing Devices
PL 11.10 Stapler Assembly (3635)
PL 14 – Scanner
PL 14.10 Scanner Assembly (3635)
PL 14.11 Scanner Assembly (3550)
PL 28 – Covers
PL 28.10 Main Covers
PL 30 – Consumables and Tools
PL 30.10 Service Tools

6. GENERAL PROCEDURES / INFORMATION
GP 1 – GP 19
GP 1 Diagnostics Entry
GP 2 Fault Codes and History Files
GP 3 Machine Status
GP 4 System Administration Tools
GP 5 Reports
GP 6 Firmware Upgrade
GP 7 Machine Specifications
GP 8 DADF Document Feeding Specifications
GP 9 Paper and Media Specifications
GP 10 General Disassembly Precautions
GP 11 Service Information
GP 12 User Interface Tests Description
GP 13 Installation Space Requirements
GP 14 Glossary of Terms, Acronyms and Abbreviations
GP 15 Shading Test
GP 16 High Frequency Service Items
GP 17 Restriction of Hazardous Substances (RoHS)
GP 18 Scan Edge (3635 Only)
GP 19 Memory Clear
Diagnostic Codes
dC001 Reset Auditron Master PIN (3635 only)
dC109 Embedded Fax Protocol Report
dC131 NVM Read/Write
dC132 NVM Initialization
dC305 UI Test
dC330 Component Control
dC606 Internal Print Test Patterns (3635 Only)
dC612 Print Test Patterns (3550 Only)
Change Tags
Change Tags

7. WIRING DATA
Wiring Diagrams
Wiring Diagrams
PWB Connector location
PWB Connectors

8. ACCESSORIES
ACC 1 Foreign Device Interface Installation

Number of pages: 266.