Xerox WorkCentre 5225 WorkCentre 5230 Parts List Manual

Parts List Manual Xerox WorkCentre 5225 WorkCentre 5230;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Xerox copier.
You can print, zoom or read any diagram, picture or page from this Parts List Manual. Every chapter on this manual is fully detailed and contain all theĀ  simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Xerox WorkCentre 5225 WorkCentre 5230 photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

Overview
Introduction
Subsystem Information
Symbology

Parts Lists
Drives
PL 1.1 Main Drive

Paper Transportation
PL 2.1 Tray, Feeder 1/2 Assembly
PL 2.2 Tray 1/2
PL 2.3 Feeder 1/2 Assembly
PL 2.4 Registration
PL 2.5 Vertical Transport Cover
PL 2.6 Transfer Cover Assembly
PL 2.7 L/H Upper Chute Assembly
PL 2.8 L/H Upper Cover Assembly

Paper Transport
PL 2.9 Envelope Tray Assembly

ROS
PL 3.1 ROS

Xerographics/Develoment
PL 4.1 CRU, Toner Cartridge
PL 4.2 Toner System
Fuser
PL 5.1 Fuser Unit

Exit
PL 6.1 Exit
PL 6.2 Exit 1
PL 6.3 L/H Upper Chute Assembly
PL 6.4 Tray Guide Assembly
PL 6.5 Tray Guide Assembly

MSI
PL 7.1 MSI Assembly
PL 7.2 Lower Frame Assembly
PL 7.3 MSI Tray Assembly

Duplex
PL 8.1 Duplex Unit
PL 8.2 Inner Chute Assembly
Electrical Components
PL 9.1 Electrical
PL 9.2 ESS
PL 9.3 FAX Unit
PL 9.4 Wire Harnesses

Covers
PL 10.1 Cover-Front, Left
PL 10.2 Cover-Rear, Right

IIT
PL 11.1 Platen/Cover
PL 11.2 Control Panel
PL 11.3 Platen Glass
PL 11.4 CCD PWB, Sensor
PL 11.5 Carriage Cable/Motor
PL 11.6 Full/Half Rate Carriage

Tray Module-2T
PL 12.1 Tray, Feeder Assembly-2 Tray
PL 12.2 Tray 3/4 Assembly-2 Tray
PL 12.3 Tray 3/4 Feeder- 2 Tray
PL 12.4 Left Cover-2Tray
PL 12.5 Takeaway Roll-2Tray
PL 12.6 Electrical-2Tray
PL 12.7 Cover-2Tray

Tray Module-TT
PL 13.1 Tray 3/4 Assembly-Tandem
PL 13.2 Tray 3 Assembly-Tandem
PL 13.3 Tray 4 Assembly-Tandem
PL 13.4 Paper Feed (1/2)-Tandem
PL 13.5 Paper Feed (2/2)-Tandem
PL 13.6 Tray 3/4 Feeder-Tandem Tray
PL 13.7 Left Cover Assembly-Tandem
PL 13.8 Electrical-Tandem Tray
PL 13.9 Cover-Tandem Tray

Mobile Stand
PL 14.1 Mobile Stand

DADF
PL 15.1 DADF Accessory
PL 15.2 DADF Component Cover
PL 15.3 DADF Base Cover
PL 15.4 DADF Feeder Component
PL 15.5 Top Cover Component
PL 15.6 Takeaway Pinch Roll, Nudger Motor, Nudger/Feed Roll
PL 15.7 DADF Feeder-Chute
PL 15.8 DADF Feeder-Roll
PL 15.9 Motor Unit Assembly
PL 15.10 DADF Document Tray

HCF
PL 18.1 HCF Unit
PL 18.2 HCF Tray 6 (1 of 2)
PL 18.3 HCF Tray 6 (2 of 2)
PL 18.4 HCF Feeder (1 of 3)
PL 18.5 HCF Feeder (2 of 3)
PL 18.6 HCF Feeder (3 of 3)
PL 18.7 HCF Top Cover Unit
PL 18.8 HCF Electrical and Rail

A-Finisher
PL 22.1 Finisher Assembly (Part 1 of 2)
PL 22.2 Finisher Assembly (Part 2 of 2)
PL 22.3 Stacker Base Assembly (Part 1 of 5)
PL 22.4 Stacker Base Assembly (Part 2 of 5)
PL 22.5 Stacker Base Assembly (Part 3 of 5)
PL 22.6 Stacker Base Assembly (Part 4 of 5)
PL 22.7 Stacker Base Assembly (Part 5 of 5)
PL 22.8 Stacker Tray Assembly
PL 22.9 Compile Assembly (Part 1 of 2)
PL 22.10 Compile Assembly (Part 2 of 2)

SB Finisher
PL 23.1 H-Transport Assembly (1 of 5)
PL 23.2 H – Transport Assembly (2 of 5)
PL 23.3 H – Transport Assembly (3 of 5)
PL 23.4 H – Transport Assembly (4 of 5)
PL 23.5 H – Transport Assembly (5 of 5)
PL 23.6 Finisher Cover
PL 23.7 Finisher Stacker
PL 23.8 Finisher Stapler
PL 23.9 Finisher Eject (1 of 5)
PL 23.10 Finisher Eject (2 of 5)
PL 23.11 Finisher Eject (3 of 5)
PL 23.12 Finisher Eject (4 of 5)
PL 23.13 Finisher Eject (5 of 5)
PL 23.14 Finisher Exit/Folder Assembly
PL 23.15 Folder Assembly
PL 23.16 Finisher Electrical
PL 23.17 Booklet Cover
PL 23.18 Booklet Stapler Assembly
PL 23.19 Booklet Front Stapler Assembly
PL 23.20 Booklet Rear Stapler Assembly
PL 23.21 Booklet Electrical

Common Hardware
Common Hardware
Part Number Index

Number of pages: 109.