Canon iR2030, iR2025, iR2022, iR2018 Series, Service Manual

Service Manual Canon iR2030, iR2025, iR2022, iR2018 Series;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Canon.
You can print, zoom or read any diagram, picture or page from this Service Manual. Every chapter on this manual is fully detailed and contain all the  simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Canon iR2030, iR2025, iR2022, iR2018 Series photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

Chapter 1: INTRODUCTION
1.1 System Construction
1.1.1 Pickup/Delivery/Original Handling Accessories System Configuration (iR2018)
1.1.2 Pickup/Delivery/Original Handling Accessories System Configuration (iR2018i)
1.1.3 Pickup/ Delivery /Original Handling Accessories System Configuration (iR2022/iR2022N/iR2025/iR2030)
1.1.4 Pickup/Delivery/Original Handling Accessories System Configuration (iR2022i/iR2022K/iR2025i/iR2030i)
1.1.5 Reader Heater/Cassette Heater System Configuration (iR2018/iR2022/iR2022N)
1.1.6 Reader Heater/Cassette Heater System Configuration (iR2018i)
1.1.7 Reader Heater/Cassette Heater System Configuration (iR2022K/iR2022i/iR2025/iR2025i/iR2030/iR2030i)
1.1.8 Printing/Transmitting Accessories System Configuration (iR2018/ir2022/iR2022N)
1.1.9 Printing/Transmitting Accessories System Configuration (iR2018i/iR2022i/iR2022K/iR2025/iR2025i/iR2030/iR2030i)
1.1.10 Functions of the Printing/Transmission Functions (iR2018/iR2022/iR2022N)
1.1.11 Functions of the Printing/Transmission Functions (iR2018i/iR2022i/iR2022K/iR2025/iR2025i/IR2030/iR2030i)
1.2 Product Specifications
1.2.1 Names of Parts
1.2.1.1 External View (iR2030i/iR2025i/iR2022i)
1.2.1.2 External View (iR2020/iR2020N/iR2030/iR2025)
1.2.1.3 External View (iR2018i)
1.2.1.4 External View (iR2018)
1.2.1.5 Cross-Section
1.2.2 Using the Machine
1.2.2.1 Turning On the Power Switch (iR2018/iR2022/iR2022N)
1.2.2.2 Turning On the Power Switch (iR2018i/iR2020i/iR2020K/iR2025/iR2025i/iR2030/iR2030i)
1.2.2.3 When Turning Off the Main Power Switch (iR2018/iR2022/iR2022N)
1.2.2.4 When Turning Off the Main Power Switch (iR2018i/iR2022i/iR2022K/iR2025/iR2025i/iR2030/iR2030i)
1.2.2.5 Control Panel
1.2.3 User Mode Items
1.2.3.1 Common Settings (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2018i)
1.2.3.2 Timer Settings (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2018i)
1.2.3.3 Adjustment/Cleaning (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2018i)
1.2.3.4 Report Settings (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2018i)
1.2.3.5 System Settings (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2018i)
1.2.3.6 Copy Settings (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2018i)
1.2.3.7 Communication Settings (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2018i)
1.2.3.8 Printer Settings (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2018i)
1.2.3.9 Address Book Settings (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2018i)
1.2.3.10 Recommended setting of system management information
1.2.3.11 The Reference Information of the Department ID Management
1.2.4 Maintenance by the User
1.2.4.1 User Maintenance Items
1.2.4.2 Cleaning (LCD type)
1.2.4.3 Cleaning (Touch panel type)
1.2.5 Safety
1.2.5.1 Safety of the Laser Light
1.2.5.2 CDRH Regulations
1.2.5.3 Handling the Laser Unit
1.2.5.4 Handling the Laser Unit
1.2.5.5 Safety of Toner
1.2.5.6 Point to Note about Fire
1.2.5.7 Cautions as to the replacement and disposal of lithium battery
1.2.6 Product Specifications
1.2.6.1 Product Specifications
1.2.7 Function List
1.2.7.1 Printing Speed (iR2030/iR2030i)
1.2.7.2 Printing Speed (iR2025/iR2025i)
1.2.7.3 Printing Speed (iR2022/iR2022i/iR2022K/iR2022N))
1.2.7.4 Printing Speed (iR2018/iR2018i/iR2018N)
1.2.7.5 Types of Paper

Chapter 2: INSTALLATION
2.1 Making Pre-Checks
2.1.1 Selecting the Site of Installation
2.1.2 Before Starting the Work (230V CENV)
2.1.3 Before Starting the Work (230V CENV)
2.2 Unpacking and Installation
2.2.1 Unpacking and Removing the Packaging Materials
2.2.2 Unpacking and Removing the Packaging Materials
2.2.3 Installing the Drum Unit
2.2.4 Installing the Toner Bottle
2.2.5 Installing the Toner Bottle
2.2.6 Setting the Cassettes
2.2.7 Attaching the Ferrite Core
2.2.8 Checking the Image Quality
2.2.9 Setting the Country/Region
2.2.10 Setting the Country/Region
2.2.11 Setting the Date and Time
2.2.12 Setting the Date and Time
2.2.13 Attaching Other Parts
2.3 Checking the Connection to the Network
2.3.1 Checking the Network Connection
2.3.2 Checking the Network Connection
2.4 Flow of Accessory Installation
2.4.1 Flow of Accessary Installation (230V CENV)
2.4.2 Flow of Accessary Installation (230V CENV)
2.5 Installing the Card Reader
2.5.1 Points to Note
2.5.2 Checking the Contents
2.5.3 Installation Procedure
2.5.4 Registering the Card IDs
2.5.5 Registering the Card IDs
2.6 Installing the Heater PCB
2.6.1 Preparing the parts
2.6.2 Preparing the Host Machine
2.6.3 Installing the Heater PCB
2.7 Installing the Reader Heater
2.7.1 Preparing the parts
2.7.2 Installing the Reader Heater Harness
2.7.3 Removing Reader Components
2.7.4 Removing Parts at the Left of the Reader
2.7.5 Installing the Reader Heater
2.8 Installing the Cassette Heater
2.8.1 Preparing the parts
2.8.2 Installing the Cassette Heater
2.9 Installing the Control Card Cable
2.9.1 Preparing the parts
2.9.2 Installing the Control Card Cable

Chapter 3: MAIN CONTROLLER
3.1 Construction
3.1.1 Construction and Mechanisms
3.2 Construction of the Electrical Circuitry
3.2.1 Image Processor PCB
3.3 Image Processing
3.3.1 Overview of the Image Flow
3.3.2 Construction of the Image Processing Module
3.3.3 Reader Unit Input Image Processing
3.3.4 Compressio/ Extesion/ Editing Block
3.3.5 Printer unit Output Image Processing
3.4 Flow of Image Data
3.4.1 Flow of Image Data According to Copy Functions
3.4.2 Flow of Image Data for the SEND Function
3.4.3 Flow of Image Data for the Fax Transmission
3.4.4 Flow of Image Data for the Fax Reception Function
3.4.5 Flow of Image Data for the PDL Function
3.5 Parts Replacement Procedure
3.5.1 Main Controller PCB
3.5.1.1 Preparation for Removing the Image Processor PCB
3.5.1.2 Removing the Image Processor PCB
3.5.1.3 Procedure after Replacing the Image Processor PCB
3.5.2 SDRAM
3.5.2.1 Preparation for Removing the SDRAM
3.5.2.2 Removing the SDRAM

Chapter 4: ORIGINAL EXPOSURE SYSTEM
4.1 Construction
4.1.1 Specifications, Control Methods, and Functions (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2022)
4.1.2 Specifications, Control Methods, and Functions (iR2018i/iR2018)
4.1.3 Major Components (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2022)
4.1.4 Major Components (iR2018i/iR2018)
4.1.5 Control System Configuration (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2022)
4.1.6 Control System Configuration (iR2018i/iR2018)
4.1.7 Reader Controller PCB (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2022)
4.1.8 Reader Controller PCB (iR2018i/iR2018)
4.2 Basic Sequence
4.2.1 Basic Sequence at Power-on
4.2.2 Basic Sequence after Depression of Start Key (Book mode, One Sheet of original)
4.2.3 Basic Sequence after Depression of Start Key (ADF Mode, One Sheet of Original)
4.3 Various Control
4.3.1 Controlling the Scanner Drive System
4.3.1.1 Outline
4.3.1.2 Reader Motor Control
4.3.2 Contact Image Sensor (CIS)
4.3.2.1 Outline
4.3.2.2 Analog Control Performed by the CIS (iR2022i/iR2022/iR2018i/iR2018)
4.3.2.3 Analog Control Performed by the CIS (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2022)
4.3.3 Enlargement/Reduction
4.3.3.1 Magnification Change in Vertical Scan Direction
4.3.3.2 Magnification Change in Horizontal Scan Direction
4.3.4 Detecting the Size of Originals
4.3.4.1 Outline
4.3.4.2 Outline of Original Size Detection
4.3.5 Dirt Sensor Control
4.3.5.1 Outline
4.3.6 Image Processing
4.3.6.1 Outline
4.3.6.2 CMOS Sensor Drive
4.3.6.3 CMOS Sensor Output Gain Correction and Offset Correction
4.3.6.4 CMOS Sensor Output A/D Conversion
4.3.6.5 Shading Correction (Outline)
4.3.6.6 Shading Adjustment
4.3.6.7 Shading Correction
4.4 Parts Replacement Procedure
4.4.1 Copyboard glass
4.4.1.1 Removing the Copyboard glass
4.4.1.2 Procedure after Replacing the Copyboard Glass (Model equipped with ADF)
4.4.1.3 Removing the ADF Reading Glass
4.4.2 Reader Controller PCB
4.4.2.1 Removing the Reader Controller PCB
4.4.3 Scanner Motor
4.4.3.1 Removing the Scanner Motor
4.4.4 Contact sensor
4.4.4.1 Removing the Contact Image Sensor (CIS)
4.4.4.2 Procedure after Replacing the CIS(Touch panel type)
4.4.5 Copyboard Cover Open/Close Sensor
4.4.5.1 Removing the Copyboard Cover Open/Close Sensor (Front/Rear)
4.4.6 Contact Sensor HP Sensor
4.4.6.1 Removing the Contact Sensor HP Sensor
4.4.7 Original Size Sensor
4.4.7.1 Removing the Original Sensor (Vertical Scan Direction)
4.4.7.2 Removing the Original Sensor (Horizontal Scan Direction)
4.4.8 Reader Heater (option)
4.4.8.1 Removing the Reader Heater (Right)
4.4.8.2 Removing the Reader Heater (Left)

Chapter 5: LASER EXPOSURE
5.1 Construction
5.1.1 Overview
5.1.2 Specifications and Control Mechanism
5.1.3 Main Components
5.1.4 Control System Configuration
5.2 Various Controls
5.2.1 Controlling the Laser Activation Timing
5.2.1.1 Laser Emission ON/OFF Control
5.2.1.2 Horizontal Synchronization Control
5.2.2 Controlling the Intensity of Laser Light
5.2.2.1 Automatic Photocurrent Control (APC)
5.2.3 Controlling the Laser Scanner Motor
5.2.3.1 Laser Scanner Motor Control
5.2.4 Controlling the Laser Shutter
5.2.4.1 Laser Shutter Control
5.3 Parts Replacement Procedure
5.3.1 Laser Scanner Unit
5.3.1.1 Removing the Laser Scanner Unit

Chapter 6: IMAGE FORMATION
6.1 Construction
6.1.1 Specifications of Image Formation System
6.1.2 Major Components of Image Formation System
6.2 Image Formation Process
6.2.1 Image Formation Process
6.3 Basic Sequence
6.3.1 Basic Sequence of Operation
6.4 Driving and Controlling the High-Voltage System
6.4.1 Outline
6.5 Drum Unit
6.5.1 Outline of the Drum Unit
6.5.1.1 Outline
6.5.2 Charging Mechanism
6.5.2.1 Primary Charging Bias Control
6.6 Developing Unit
6.6.1 Outline
6.6.2 Developing Bias Control
6.7 Toner Container
6.7.1 Outline
6.8 Transfer Unit
6.8.1 Outline of the Transfer Unit
6.8.1.1 Outline
6.8.2 Controlling the Transfer Bias
6.8.2.1 Transfer Roller Bias Control
6.8.3 Separation Mechanism
6.8.3.1 Static Eliminator Bias Control
6.9 Photosensitive Drum Cleaning
6.9.1 Outline
6.9.2 Waste Toner Full Detection
6.10 Parts Replacement Procedure
6.10.1 Drum Unit
6.10.1.1 Removing the Drum Unit
6.10.2 Developing Assembly
6.10.2.1 Removing the Developing Assembly
6.10.2.2 Precautions about Installation of Developing Assembly
6.10.2.3 Procedure after Replacing the Developing Assembly
6.10.3 Transfer Charging Roller
6.10.3.1 Removing the Transfer Charging Roller

Chapter 7: PICKUP/FEEDING SYSTEM
7.1 Construction
7.1.1 Specifications/Configuration/Operation Methods
7.1.2 Locations of Main Units
7.1.3 Roller Layout Drawing
7.1.4 Paper Path Drawing (Printer on its own)
7.1.5 Paper Path Drawing (Finisher-U2)
7.1.6 Paper Path Drawing (Duplex Unit-B1/Finisher-U2)
7.1.7 Paper Path Drawing (Duplex Unit-B1)
7.1.8 Paper Path Drawing (Duplex-B1/Inner 2Way Tray-E2)
7.1.9 Paper Path Drawing(Inner 2Way Tray-E2)
7.1.10 Sensor Layout Drawing
7.2 Detecting Jams
7.2.1 Delay Jams
7.2.1.1 Delay Jam in Pickup Assembly
7.2.1.2 Delay Jam in Delivery Assembly (Paper Leading Edge Jam at First Delivery Sensor/Wound Paper Jam at Fixing Assembly)
7.2.2 Stationary Jams
7.2.2.1 Stationary Jam in Pickup Assembly
7.2.2.2 Stationary Jam in Delivery Assembly (Paper Trailing Edge Stationary Jam at First Delivery Sensor/Stationary Jam at First
Delivery Sensor)
7.2.3 Other Jams
7.2.3.1 Door Open Jam
7.3 Cassette Pick-Up Unit
7.3.1 Overview
7.3.2 Cassette Pickup Operation
7.3.3 Cassette Paper Size Detection
7.4 Manual Feed Pickup Unit
7.4.1 Overview
7.4.2 Post-pickup Control after Multi Manual Feed Pickup
7.5 Parts Replacement Procedure
7.5.1 Pickup Roller
7.5.1.1 Removing the Cassette Paper Pickup Roller
7.5.2 Cassette
7.5.2.1 Removing the Cassette Unit
7.5.3 Cassette Pickup Assembly
7.5.3.1 Removing the Cassette Pickup Assembly
7.5.4 Cassette Size Sensor
7.5.4.1 Removing the Paper Size Detection Switches
7.5.5 Cassette Retry Paper Sensor
7.5.5.1 Removing the Retry Sensor
7.5.6 Cassette Paper Sensor
7.5.6.1 Removing the Cassette Paper Presence/Absence Sensor
7.5.7 Cassette Pickup Solenoid
7.5.7.1 Removing the Cassette Pickup Solenoid
7.5.8 Manual Pickup Roller
7.5.8.1 Removing the Multifeeder Pickup Roller
7.5.9 Manual Feed Tray paper sensor
7.5.9.1 Removing the Multifeeder Paper Presence/Absence Sensor
7.5.10 Manual Feed Pickup Solenoid
7.5.10.1 Removing the Multifeeder Pickup Solenoid
7.5.11 Registration Roller
7.5.11.1 Removing the Registration Roller
7.5.12 Registration Clutch
7.5.12.1 Removing the Registration Clutch
7.5.13 Separation Roller
7.5.13.1 Removing the Feed and Separation Rollers
7.5.14 Separation Pad
7.5.14.1 Removing the Separation Pad

Chapter 8: FIXING SYSTEM
8.1 Construction
8.1.1 Specifications, Control Mechanisms and Functions
8.1.2 Major Components
8.2 Various Control Mechanisms
8.2.1 Controlling the Speed of the Fixing Film
8.2.1.1 Controlling the Fixing Film Speed
8.2.2 Controlling the Fixing Film Temperature
8.2.2.1 Outline
8.2.2.2 Controlling the Fixing Film Temperature
8.2.2.3 Target Temperatures by Mode (iR2030/iR2030i)
8.2.2.4 Target Temperatures by Mode (iR2025/iR2025i)
8.2.2.5 Target Temperatures by Mode (iR2022/iR2022i/iR2022K/iR2022N)
8.2.2.6 Target Temperatures by Mode (iR2018/iR2018i/iR2018N)
8.2.3 Detecting the Passage of Paper
8.2.3.1 Detecting the Passage of Paper
8.3 Protective Functions
8.3.1 Protective Functions
8.4 Parts Replacement Procedure
8.4.1 Fixing Unit
8.4.1.1 Removing the Fixing Unit
8.4.2 Pressure Roller
8.4.2.1 Removing the Pressure Roller
8.4.3 Fixing Film
8.4.3.1 Removing the Fixing Film Unit
8.4.4 Fixing Delivery Sensor
8.4.4.1 Removing the Fixing Delivery Sensor
8.4.5 Fixing Film Sensor
8.4.5.1 Removing the Fixing Film Sensor

Chapter 9: EXTERNAL AND CONTROLS
9.1 Control Panel
9.1.1 Overview (iR2022/iR2022N/iR2018/iR2018N)
9.1.2 Overview (iR2030i/iR2030/iR2025i/iR2025/iR2022K/iR2022i/iR2018i)
9.2 Fans
9.2.1 Overview (iR2022/iR2022N/iR2018/iR2018N)
9.2.2 Overview (iR2030i/iR2030/iR2025i/iR2025/iR2022K/iR2022i/iR2018i)
9.2.3 Fan Control
9.3 Power Supply System
9.3.1 Power Supply
9.3.1.1 Outline
9.3.1.2 Rated Output of the Power Supply PCB
9.3.2 Protection Function
9.3.2.1 Protective Mechanisms
9.4 Parts Replacement Procedure
9.4.1 External Covers
9.4.1.1 External Covers
9.4.1.2 Delivery Tray
9.4.1.3 Right Cover (Lower)
9.4.1.4 Right Cover (Upper)
9.4.1.5 Rear Cover
9.4.1.6 Left Cover (Rear)
9.4.1.7 Reader Front Cover
9.4.1.8 Reader Rear Cover
9.4.2 Main Drive Assembly
9.4.2.1 Removing the Main Drive Unit
9.4.3 Fixing Drive Assembly
9.4.3.1 Removing the Fixing Drive Unit
9.4.4 Power Supply Unit
9.4.4.1 Removing the Main Power Supply PCB
9.4.5 Control Panel
9.4.5.1 Removing the Operation Panel Unit (LCD Type)
9.4.5.2 Removing the Operation Panel Unit (Touch Panel Type)
9.4.6 DC Controller PCB
9.4.6.1 Removing the DC Controller PCB
9.4.7 Option Power Supply PCB
9.4.7.1 Removing the Option Power Supply PCB
9.4.8 HVT PCB
9.4.8.1 Removing the HVT PCB
9.4.9 Fixing Heat Discharge Fan
9.4.9.1 Removing the Fixing Heat Discharge Fan (Non Duplex Unit Type)
9.4.9.2 Removing the Fixing Heat Discharge Fan (With Duplex Unit Type)
9.4.10 Fan Filter
9.4.10.1 Removing the Fan Filter (Non Duplex Unit)
9.4.10.2 Removing the Fan Filter (With Duplex Unit Type)
9.4.11 Motor of Main Drive Assembly
9.4.11.1 Removing the Main Motor
9.4.12 Fixing Driver Motor
9.4.12.1 Removing the Fixing Unit Drive Motor
9.4.13 Left Door
9.4.13.1 Removing the Left Door (Non Duplex Unit Type)
9.4.13.2 Removing the Left Door (With Duplex Unit Type)

Chapter 10: RDS
10.1 RDS
10.1.1 Overview
10.1.2 Application Operation Mode
10.1.3 Communication Test
10.1.4 Communication Log
10.1.5 Detail of Communication Log
10.1.6 Initialization of e-RDS
10.1.7 SOAP Communication Function
10.1.8 Retransmission at the time of SOAP Transmission Error
10.1.9 e-RDS Setting Screen
10.1.10 Report Output of Communication Error Log
10.1.11 Sleep Operation
10.1.12 Alarm Filtering, Alert Filtering
10.1.13 CA Certificate
10.1.14 Settings of Network Connection (Installation/Maintenance)
10.1.15 Settings of e-RDS (Installation/Maintenance)
10.1.16 Troubleshooting
10.1.17 Error Message list

Chapter 11: MAINTENANCE AND INSPECTION
11.1 Periodically Replaced Parts
11.1.1 Overview
11.1.2 Reader Unit
11.1.3 Printer Unit
11.2 Durables and Consumables
11.2.1 Overview
11.2.2 Reader Unit
11.2.3 Printer Unit
11.3 Scheduled Servicing Basic Procedure
11.3.1 Scheduled Servicing

Chapter 12: STANDARDS AND ADJUSTMENTS
12.1 Scanning System
12.1.1 Procedure after Replacing the CIS (LCD type)
12.1.2 Procedure after Replacing the CIS (Touch panel type)
12.1.3 Procedure after Replacing the Copyboard Glass (With ADF)
12.2 Image Formation System
12.2.1 Procedure after Replacing the Developing Assembly
12.3 Electrical Components
12.3.1 Procedure after Replacing the Image Processor PCB (LCD type)
12.3.2 Procedure after Replacing the Image Processor PCB (Touch panel type)
12.3.3 Procedure after Replacing the USB Memory (Touch panel type)
12.3.4 Actions to Take before All Clearing (Backing up the User Data)

Chapter 13: CORRECTING FAULTY IMAGES
13.1 Making lnitial Checks
13.1.1 Site Environment
13.1.2 Checking the Paper
13.1.3 Checking the Placement of Paper
13.1.4 Checking the Durables
13.1.5 Checking the Units and Functional Systems
13.1.6 Others
13.2 Outline of Electrical Components
13.2.1 Clutch/Solenoid
13.2.1.1 List of Clutches/Solenoids
13.2.2 Motor
13.2.2.1 List of Motors
13.2.3 Fan
13.2.3.1 List of Fans
13.2.4 Sensor
13.2.4.1 List of Sensors
13.2.5 Switch
13.2.5.1 List of Switches
13.2.6 Lamps, Heaters, and Others
13.2.6.1 List of Lamps, Heaters, and Others
13.2.7 PCBs
13.2.7.1 List of PCBs

Chapter 14: SELF DIAGNOSIS
14.1 Error Code Table
14.1.1 List of Error Codes
14.2 Error Code Details
14.2.1 Error Code Details
14.3 Jam Code
14.3.1 Jam Codes (Related to Printer Unit)
14.3.2 Jam Codes (Related to Finisher)
14.3.3 Jam Codes (Related to ADF)
14.3.4 Jam Codes (Related to Duplex Unit)
14.3.5 Jam Codes (Related to Inner 2-way Tray)
14.4 Finisher Error Codes
14.4.1 Error Code Details
14.5 FAX Error Codes
14.5.1 Outline
14.5.1.1 Error Code Outline
14.5.2 User Error Code
14.5.2.1 User Error Code
14.5.3 Service Error Code
14.5.3.1 Service Error Code

Chapter 15: SERVICE MODE
15.1 Outline
15.1.1 Outline of Service Mode
15.1.2 Using the Mode (Touch Panel Type)
15.1.3 Using the Mode (LCD Type)
15.2 Default settings
15.2.1 Service Mode Menus
15.3 Setting of Bit Switch (SSSW)
15.3.1 Outline
15.3.1.1 Bit Switch Composition
15.3.2 SSSW-SW01
15.3.2.1 List of Functions
15.3.2.2 Detailed Discussions of Bit 0
15.3.3 SSSW-SW03
15.3.3.1 List of Functions
15.3.3.2 Detailed Discussions of Bit 7
15.3.4 SSSW-SW04
15.3.4.1 List of Functions
15.3.4.2 Detailed Discussions of Bit 2
15.3.4.3 Detailed Discussions of Bit 3
15.3.4.4 Detailed Discussions of Bit 4
15.3.4.5 Detailed Discussions of Bit 5
15.3.4.6 Detailed Discussions of Bit 6
15.3.4.7 Detailed Discussions of Bit 7
15.3.5 SSSW-SW05
15.3.5.1 List of Functions
15.3.5.2 Detailed Discussions of Bit 1
15.3.5.3 Detailed Discussions of Bit 2
15.3.6 SSSW-SW12
15.3.6.1 List of Functions
15.3.7 SSSW-SW13
15.3.7.1 List of Functions
15.3.7.2 Detailed Discussions of Bit 2
15.3.8 SSSW-SW14
15.3.8.1 List of Functions
15.3.8.2 Detailed Discussions of Bit 2
15.3.8.3 Detailed Discussions of Bit 4
15.3.9 SSSW-SW25
15.3.9.1 List of Functions
15.3.9.2 Detailed Discussions of Bit 0
15.3.9.3 Detailed Discussions of Bit 2
15.3.10 SSSW-SW28
15.3.10.1 List of Functions
15.3.10.2 Detailed Discussions of Bit 0
15.3.10.3 Detailed Discussions of Bit 1
15.3.10.4 Detailed Discussions of Bit 2
15.3.10.5 Detailed Discussions of Bit 3
15.3.10.6 Detailed Discussions of Bit 4
15.3.10.7 Detailed Discussions of Bit 5
15.3.11 SSSW-SW30
15.3.11.1 List of Functions
15.3.11.2 Detailed Discussions of Bit 5
15.3.12 SSSW-SW33
15.3.12.1 List of Functions
15.3.12.2 Detailed Discussions of Bit 0
15.3.12.3 Detailed Discussions of Bit 1
15.3.12.4 Detailed Discussions of Bit 2
15.3.12.5 Detailed Discussions of Bit 3 – Bit4
15.3.13 SSSW-SW34
15.3.13.1 List of Functions
15.3.13.2 Detailed Discussions of Bit 0
15.3.13.3 Detailed Discussions of Bit 1
15.4 Setting of Menu Switch (Menu)
15.4.1 Menu Switch Composition
15.4.2
15.4.3
15.4.4
15.4.5
15.4.6
15.4.7
15.5 Setting of Numeric Parameter (NUMERIC Param.)
15.5.1 Numerical Parameter Composition
15.5.2
15.5.3
15.5.4
15.5.5
15.5.6
15.5.7
15.5.8
15.5.9
15.5.10
15.5.11
15.5.12
15.5.13
15.5.14
15.5.15
15.5.16
15.6 Setting of Scanner Functions (SCANNER)
15.6.1 Setting of Bit Switch
15.6.2 Numeric Parameter Functional configuration
15.6.3
15.6.4
15.6.5
15.6.6
15.6.7
15.6.8
15.6.9
15.6.10
15.6.11
15.6.12
15.6.13
15.6.14
15.6.15
15.6.16
15.6.17
15.6.18
15.6.19
15.6.20
15.6.21
15.6.22
15.6.23  (if equipped with SEND functions))
15.6.24  (if equipped with SEND functions)
15.6.25  (if equipped with SEND functions)
15.7 Setting of Printer Functions (PRINTER)
15.7.1 Service Soft Switch Settings (PRINTER)
15.7.1.1 SSSW-SW05
15.7.1.2 SSSW-SW14
15.7.1.3 SSSW-SW15
15.7.1.4 SSSW-SW18
15.7.2 Numerin Parameter Settings (Numeric Prama.)
15.7.2.1 List of Functions
15.7.2.2
15.7.2.3
15.7.2.4
15.7.2.5
15.7.2.6
15.7.2.7
15.7.2.8
15.7.2.9
15.7.2.10
15.7.2.11
15.7.2.12
15.7.2.13
15.7.2.14
15.7.2.15
15.7.2.16
15.7.2.17
15.7.2.18
15.7.2.19