Graphtec SignJet JS310 Series Service Manual and Parts List Manual

Service Manual and Parts List Manual Graphtec SignJet JS310 Series;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Graphtec.
You can print, zoom or read any diagram, picture or page from this Service Manual and Parts List Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Graphtec SignJet JS310 Series. You can find easily everything what do you need.
To see what contain, please read table of contents:

1. SAFETY INFORMATION
1.1 Safety precautions
1.2 Important Safety Information
1.3 Caution When Using Printer
1.4 Guide When Using Ink
1.5 Choosing Printer Installation Place
1.6 Warning, Caution and Attention

2. TECHNICAL PARAMETERS

3. PRODUCT CONFIGURATION
3.1 Main Unit
3.2 Accessories
3.3 Consumables

4. BASIC PANEL OPERATION
4.1 Menu Structure of Control Panel
4.1.1 Function description of the keys
4.1.2 Menu structure
4.2 Description of menu function
4.3 LCD display for normal usage
4.3.1 LCD display during printing
4.3.2 LCD display when printing is paused
4.3.3 System warning and error display
4.4 Printing Steps

5. ASSEMBLING THE PRINTER AND THE INSTALLATION PROCEDURE
5.1 Notes on the Installation Environment
5.1.1 Installation Space
5.1.2 Installation Space
5.1.3 Power Supply Specifications
5.2 Removing the Printer from its Packaging
5.3 Mounting the Ink Tanks
5.4 Mounting the Waste Ink Tanks
5.5 Connecting the Power Supplies
5.6 Setting the Print Speed
5.6.1 Turning on the printer power supply
5.6.2 Setting the print head carriage speed
5.6.3 Setting the media feed speed
5.7 Executing the Moving Test

6. INITIAL INK INDUCTION PROCEDURE
6.1 Initial Cleaning of the Ink Supply Tubes and the Sub Tanks
6.2 Initial Cleaning of the Cleaning Solution Supply Tubes
6.3 Print head height Adjustment
6.4 Mounting the Print heads
6.5 Initial Print head Cleaning Procedure
6.6 Ink Induction

7. MEDIA LOADING PROCEDURE
7.1 Loading the Media
7.2 Adjusting the auto feed function
7.3 Winding the Media onto the Take-up Unit
7.4 Adjusting the auto take-up function
7.5 Setting the Media Width

8. PRINT HEAD ADJUSTMENTS PROCEDURES
8.1 Setting the Print head Drive Voltage
8.2 Installing the Printer Adjustment Utility Software “Try”
8.3 Connecting the Print Heads
8.4 Launching the Try Utility
8.5 Printing the Nozzle Check Pattern
8.6 Adjusting the Positions of Print heads of the Same Color
8.7 Adjusting the Positions of Print heads of a Different Color
8.8 Media Feed Amount Compensation
8.9 Bi-directional Printing Band Adjustments

9. PROCEDURES WHEN LEAVING THE PRINTER FOR A LONG TIME
9.1 Dispose the ink from the printer
9.2 Induction of the cleaning solution
9.3 Moisturizing of print head

10. PROCEDURES WHEN YOU TRANSPORT THE PRINTER
10.1 Dispose the cleaning solution from the printer
10.2 Fixing the printhead carriage
10.3 Discard the waste ink

11. TROUBLESHOOTING
11.1 Printing is not performed
11.2 Unsatisfactory printing
11.3 Cleaning cannot be performed
11.4 Other problems
11.5 Additional Troubleshooting

12. CONSUMABLES
13. How to use the Print head position alignment jig

14. Ink supply system diagram
15. Recommended print conditions
16. Upgrading of firmware
17. AC cable alteration procedure from CEE to NEMA

18. MAINTENANCE PARTS LISTS
18.1 Recommend Parts List
18.2 Electrical part
18.3 Control panel
18.4 Main Frame
18.5 Sensor part
18.6 Inkjet part
18.7 Cables
18.8 Accessories