Konica Minolta Bizhub C458 Bizhub C558 Bizhub C658 Service Manual

Service Manual Konica Minolta Bizhub C458 Bizhub C558 Bizhub C658;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Konica Minolta Bizhub C458 Bizhub C558 Bizhub C658 copier.
You can print, zoom or read any diagram, picture or page from this Service Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Konica Minolta Bizhub C458 Bizhub C558 Bizhub C658 photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

A) SAFETY AND IMPORTANT WARNING ITEMS
1. IMPORTANT NOTICE
2. DESCRIPTION ITEMS FOR DANGER, WARNING AND CAUTION
2.1 Description items in this Service Manual
2.2 Description items for safety and important warning items
3. SAFETY WARNINGS
3.1 MODIFICATIONS NOT AUTHORIZED BY KONICA MINOLTA, INC
3.1.1 Actions requiring special attention
3.2 POWER PLUG SELECTION
3.2.1 Power Cord Set or Power Plug
3.3 CHECKPOINTS WHEN PERFORMING ON-SITE SERVICE
3.3.1 Power Supply
3.3.2 Installation Requirements
3.3.3 After Service
3.4 FUSE
3.5 Used Batteries Precautions
3.5.1 ALL Areas
3.5.2 Germany
3.5.3 France
3.5.4 Denmark
3.5.5 Finland, Sweden
3.5.6 Norway
3.6 Laser Safety
3.6.1 Laser Safety
3.6.2 Internal Laser Radiation
3.6.3 Laser Safety Label
3.6.4 Laser Caution Label
3.6.5 PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT
4. WARNING INDICATIONS ON THE MACHINE
4.1 Warning indications inside the machine
4.2 Warning indications on the boards
5. MEASURES TO TAKE IN CASE OF AN ACCIDENT

B) NOTATION OF THE CONTENTS
1. PRECAUTION ON HANDLING THIS MANUAL
2. PRODUCT NAME
3. BRAND NAME
3.1 TRADEMARKS OF OTHER COMPANIES
3.2 OWN TRADEMARKS
4. FEEDING DIRECTION

C) PRODUCT SPECIFICATIONS
1. Bizhub C368/C308/C258
1.1 Type
1.2 Function
1.3 Paper
1.4 Material
1.5 Print volume
1.6 Machine specification
1.7 Operating environment
1.8 Print function
1.9 Scan function
1.10 Note for the Specifications
2. Bizhub C658/C558/C458
2.1 Type
2.2 Function
2.3 Paper
2.4 Material
2.5 Print volume
2.5.1 bizhub C658
2.5.2 bizhub C558
2.5.3 bizhub C458
2.6 Machine specification
2.7 Operating environment
2.8 Print functions
2.9 Scan functions
2.10 Note for the Specifications
3. Dual scan document feeder
3.1 Type
3.2 Function
3.3 Type of document
3.4 Particular original
3.5 Prohibited original
3.6 Mixed original feed chart
3.7 Machine specification
3.8 Operating environment
3.9 Note for the Specifications
4. DF-629
4.1 Type
4.2 Function
4.3 Type of document
4.4 Particular original
4.5 Prohibited original
4.6 Mixed original feed chart
4.6.1 For metric area
4.6.2 For inch area
4.7 Machine specification
4.8 Operating environment
4.9 Note for the Specifications
5. DF-704
5.1 Type
5.2 Function
5.3 Type of document
5.4 Particular original
5.5 Prohibited original
5.6 Mixed original feed chart
5.6.1 For metric area
5.6.2 For inch area
5.7 Machine specification
5.8 Operating environment
5.9 Note for the Specifications
6. PC-110/PC-210
6.1 Type
6.2 Paper
6.3 Machine specification
6.4 Operating environment
6.5 Note for the Specifications
7. PC-115/PC-215
7.1 Type
7.2 Paper
7.3 Machine specification
7.4 Operating environment
7.5 Note for the Specifications
8. PC-410
8.1 Type
8.2 Paper
8.3 Machine specification
8.4 Operating environment
8.5 Note for the Specifications
9. PC-415
9.1 Type
9.2 Paper
9.3 Machine specification
9.4 Operating environment
9.5 Note for the Specifications
10. LU-207
10.1 Type
10.2 Paper
10.3 Machine specification
10.4 Operating environment
10.5 Note for the Specifications
11. LU-302
11.1 Type
11.2 Paper
11.3 Machine specification
11.4 Operating environment
11.5 Note for the Specifications
12. JS-506
12.1 Type
12.2 Function
12.3 Capacity
12.4 Offset function
12.5 Machine specification
12.6 Operating environment
12.7 Note for the Specifications
13. FS-533
13.1 Type
13.2 Function
13.3 Paper process ability
13.3.1 Non sort/sort/group
13.3.2 Sort offset/group offset
13.3.3 Sort staple
13.4 Machine specification
13.5 Operating environment
13.6 Note for the Specifications
14. PK-519
14.1 Type
14.2 Function
14.3 Paper
14.4 Machine specification
14.5 Operating environment
14.6 Note for the Specifications
15. FS-534/FS-534SD
15.1 Type
15.2 Function
15.3 Paper process ability
15.3.1 Non sort/sort/group
15.3.2 Sort offset/group offset
15.3.3 Sort staple
15.3.4 Saddle stitching/folding
15.3.5 Tri-folding
15.4 Machine specification
15.5 Operating environment
15.6 Note for the Specifications
16. PK-520
16.1 Type
16.2 Functions
16.3 Paper
16.4 Machine specification
16.5 Operating environment
16.6 Note for the Specifications
17. FS-537/FS-537SD
17.1 Type
17.2 Function
17.3 Staple
17.4 Capacity
17.5 Half-Fold
17.6 Tri-folding
17.7 Machine specification
17.8 Operating environment
17.9 Note for the Specifications
18. PK-523
18.1 Type
18.2 Function
18.3 Paper
18.4 Machine specification
18.5 Operating environment
18.6 Note for the Specifications
19. ZU-609
19.1 Type
19.2 Function
19.3 Paper process ability
19.3.1 Paper size
19.3.2 Number of sets stacked of the Z-folding
19.3.3 Number of stacked sheets of double-folding
19.4 Machine specification
19.5 Operating environment
19.6 Note for the Specifications
20. JS-602
20.1 Type
20.2 Function
20.3 Paper
20.4 Machine specification
20.5 Operating environment
20.6 Note for the Specifications
21. PI-507
21.1 Type
21.2 Function
21.3 Paper
21.4 Machine specification
21.5 Operating environment
21.6 Note for the Specifications
22. FS-536/FS-536SD
22.1 Type
22.2 Function
22.3 Paper process ability
22.3.1 Non sort/sort/group
22.3.2 Sort offset/group offset
22.3.3 Sort staple
22.3.4 Center staple/folding
22.3.5 Tri-folding
22.4 Machine specification
22.5 Operating environment
22.6 Note for the Specifications
23. CU-101
23.1 Type
23.2 Machine specification
23.3 Operating environment
23.4 Note for the Specifications
24. CU-102
24.1 Type
24.2 Machine specification
24.3 Operating environment
24.4 Note for the Specifications
25. FK-514/FK-515
25.1 Basic specifications
25.1.1 General specifications
25.1.2 Scanning section
25.1.3 Recording section
25.1.4 Line connecting section
25.1.5 Control panel section
25.2 Functional specification
25.2.1 Dial functions
25.2.2 Transmission
25.2.3 Polling
25.2.4 Line seizure mode and telephone function
25.2.5 Message reception and record
25.2.6 Memory function
25.2.7 Various communication function
25.2.8 User lists / reports
25.2.9 Other user functions
25.3 Network fax specification
25.3.1 Internet Fax
25.3.2 IP Address Fax
26. i-Option LK-102 v3/104 v3/105 v4/106/107/108/110 v2/111/114/115 v2
26.1 Available function for i-Option
26.1.1 List of advanced functions
26.1.2 Types of advanced functions
26.1.3 Activation procedures of i-Option
26.2 Web browser function

D) OVERALL COMPOSITION
1. SYSTEM CONFIGURATION (bizhub C368/C308/C258)
1.1 System configuration
1.1.1 System front view 1
1.1.2 System front view 2
1.2 Optional configuration
1.2.1 Combination configuration of main body and document options
1.2.2 Combination configuration of main body and paper feed options
1.2.3 Combination configuration of main body and post-processing options
1.2.4 Combination of main body and fax kit
1.2.5 Combination of main body (scanner section) and heater
1.2.6 Combination configuration of paper feed options and dehumidifier heater
2. SYSTEM CONFIGURATION (bizhub C658/C558/C458)
2.1 System configuration
2.1.1 System front view 1
2.1.2 System front view 2
2.2 Optional configuration
2.2.1 Combination configuration of main body and document options
2.2.2 Combination configuration of main body and paper feed options
2.2.3 Combination configuration of main body and post-processing options
2.2.4 Combination of main body and fax kit
2.2.5 Combination of main body (scanner section) and heater
2.2.6 Combination configuration of paper feed options and dehumidifier heater
3. SECTION CONFIGURATION (bizhub C368/C308/C258)
4. SECTION CONFIGURATION (bizhub C658/C558/C458)
5. PAPER PATH (bizhub C368/C308/C258)
6. PAPER PATH (bizhub C658/C558/C458)
6.1 Main body + FS-537SD + RU-513 + LU-207 + PI-507
6.2 Main body + FS-536SD + RU-513 + LU-302
7. CONTROL BLOCK DIAGRAM (bizhub C368/C308/C258)
8. CONTROL BLOCK DIAGRAM (bizhub C658/C558/C458)
9. IMAGE CREATION PROCESS
10. IMAGE FORMING CONTROL (bizhub C368/C308/C258)
11. IMAGE FORMING CONTROL (bizhub C658/C558/C458)
12. PROCESS SPEED (bizhub C368/C308/C258)
13. PROCESS SPEED (bizhub C658/C558/C458)

E) SERVICE TOOL
1. Bizhub C368/C308/C258
1.1 Service material list
1.2 CE tool list
1.3 Utility tool
1.3.1 IC card information setting tool of AU-201/AU-201S/AU-202H/OMNIKEY 5427CK (AU-205H)/SCL-010/YSoft card
reader
2. DF-629/DF-704
2.1 CE tool list
3. bizhub C658/C558/C458
3.1 Service material list
3.2 CE tool list
3.3 Utility tool
3.3.1 IC card information setting tool of AU-201/AU-201S/AU-202H/OMNIKEY 5427CK (AU-205H)/SCL-010/YSoft card
reader
4. Dual Scan Document Feeder
4.1 CE tool list

F) PERIODICAL MAINTENANCE
1. Concept of periodical maintenance
2. Periodical maintenance items
2.1 Main unit (bizhub C368/C308/C258)
2.1.1 bizhub C368
2.1.2 bizhub C308
2.1.3 bizhub C258
2.2 Main unit (bizhub C658/C558/C458)
2.2.1 bizhub C658
2.2.2 bizhub C558
2.2.3 bizhub C458
2.2.4 Dual scan document feeder
2.3 Option (bizhub C368/C308/C258)
2.3.1 DF-704
2.3.2 DF-629
2.3.3 PC-110/PC-410
2.3.4 PC-210
2.3.5 LU-302
2.3.6 FS-534
2.3.7 FS-534SD
2.3.8 FS-533
2.4 Option (bizhub C658/C558/C458)
2.4.1 PC-115/PC-415
2.4.2 PC-215
2.4.3 LU-207/LU-302
2.4.4 FS-537
2.4.5 FS-537SD
2.4.6 ZU-609
2.4.7 JS-602
2.4.8 PI-507
2.4.9 FS-536
2.4.10 FS-536SD
2.4.11 FS-533 (C558/C458 only)
3. Periodical replacement parts list
3.1 Bizhub C368/C308/C258
3.2 Bizhub C658/C558/C458
3.3 Option (Bizhub C368/C308/C258)
3.3.1 DF-704
3.3.2 DF-629
3.3.3 PC-110
3.3.4 PC-210
3.3.5 PC-410
3.3.6 LU-302
3.3.7 FS-534
3.3.8 FS-534SD
3.3.9 FS-533
3.4 Option (Bizhub C658/C558/C458)
3.4.1 PC-115
3.4.2 PC-215
3.4.3 PC-415
3.4.4 LU-207
3.4.5 LU-302
3.4.6 FS-537
3.4.7 FS-537SD
3.4.8 PI-507
3.4.9 FS-536
3.4.10 FS-536SD
3.4.11 FS-533 (C558/C458 only)
4. Periodical cleaning parts list (Bizhub C368/C308/C258)
4.1 Main unit
4.2 DF-704
4.3 DF-629
4.4 FS-534
4.5 FS-534SD
4.6 FS-533
5. Periodical cleaning parts list (Bizhub C658/C558/C458)
5.1 Main unit
5.2 FS-537
5.3 FS-537SD
5.4 ZU-609
5.5 JS-602
5.6 PI-507
5.7 FS-536
5.8 FS-536SD
5.9 FS-533 (C558/C458 only)
6. Concept of parts life
6.1 Life value of consumables and parts (bizhub C368/C308/C258)
6.2 Life value of consumables and parts (bizhub C658/C558/C458)
6.3 Details of the life specifications (bizhub C368/C308/C258)
6.3.1 Japan
6.3.2 North America
6.3.3 Europe
6.4 Details of the life specifications (bizhub C658/C558/C458)
6.4.1 Japan
6.4.2 North America
6.4.3 Europe
6.5 Details for life of consumables/periodical replacement parts
6.5.1 Toner cartridge
6.5.2 Drum unit
6.5.3 Developing unit
6.5.4 Transfer belt unit
6.5.5 Transfer roller unit
6.5.6 Toner Filter
6.5.7 Fusing unit
6.6 Control causing inhibited printing for one part when an inhibited-printing event occurs in another part
6.6.1 Outline
6.6.2 Target parts
6.6.3 Threshold value
7. Periodical maintenance procedure Bizhub C368/C308/C258
7.1 Photo conductor section
7.1.1 Replacing the drum unit
7.2 Developing section
7.2.1 Replacing the developing unit
7.3 Toner supply section
7.3.1 Replacing the toner cartridge
7.4 1st transfer section
7.4.1 Cleaning of the image transfer entrance guide
7.4.2 Cleaning of the IDC sensor window
7.4.3 Replacing the transfer belt unit
7.5 2nd transfer/separation section
7.5.1 Replacing the transfer roller unit
7.6 Toner collection section
7.6.1 Replacing the waste toner box
7.6.2 Cleaning of the area around the waste toner collecting port
7.7 Paper feed section
7.7.1 Replacing the tray 1 feed roller, tray 1 pick-up roller, tray 1 separation roller
7.7.2 Replacing the tray 2 feed roller, tray 2 pick-up roller, tray 2 separation roller
7.7.3 Replacing the manual bypass tray feed roller, manual bypass tray separation roller assy
7.8 Registration section
7.8.1 Cleaning of the registration roller
7.9 Fusing section
7.9.1 Replacing the fusing unit
7.10 Duplex section
7.10.1 Cleaning of the duplex transport rollers
8. Periodical maintenance procedure Bizhub C658/C558/C458
Periodical maintenance procedure (Bizhub C658/C558/C458)
8.1 Housing section
8.1.1 Replacing the toner filter
8.2 Photo conductor section
8.2.1 Replacing the drum unit
8.3 Developing section
8.3.1 Replacing the developing unit
8.4 Toner supply section
8.4.1 Replacing the toner cartridge
8.5 1st transfer section
8.5.1 Cleaning of the image transfer entrance guide
8.5.2 Cleaning of the IDC sensor window
8.5.3 Replacing the transfer belt unit
8.6 2nd transfer/separation section
8.6.1 Replacing the transfer roller unit
8.7 Toner collection section
8.7.1 Replacing the waste toner box
8.7.2 Cleaning of the area around the waste toner collecting port
8.8 Document feed section
8.8.1 Replacing the tray 1 feed roller, tray 1 pick-up roller, tray 1 separation roller
8.8.2 Replacing the tray 2 feed roller, tray 2 pick-up roller, tray 2 separation roller
8.8.3 Replacing the manual bypass tray feed roller, manual bypass tray separation roller assy
8.9 Registration section
8.9.1 Cleaning of the registration roller
8.10 Fusing section
8.10.1 Replacing the fusing unit (bizhub C658/C558)
8.10.2 Replacing the fusing unit (bizhub C458)
8.10.3 Cleaning of the IH coil (bizhub C658/C558)
8.11 Duplex section
8.11.1 Cleaning of the duplex transport rollers
9. Periodical maintenance procedure dual scan document feeder
9.1 Take-up section
9.1.1 Cleaning of the pick-up roller/feed roller
9.1.2 Cleaning of the separation roller
9.1.3 Cleaning the torque limiter
9.1.4 Replacing the pick-up roller/feed roller
9.1.5 Replacing the separation roller
9.2 Transport section
9.2.1 Cleaning of the miscellaneous rolls
9.2.2 Cleaning of the miscellaneous rollers
9.3 Scanning section
9.3.1 Cleaning of the front side scanning guide
9.3.2 Cleaning of the reflective sensor section
10. Periodical maintenance procedure DF-629
10.1 Take-up section
10.1.1 Cleaning of the pick-up roller/feed roller
10.1.2 Cleaning of the separation roller
10.1.3 Replacing the paper feed assy
10.1.4 Replacing the pick-up roller/feed roller
10.1.5 Replacing the separation roller assy
10.2 Transport section
10.2.1 Cleaning of the miscellaneous rolls
10.2.2 Cleaning of the miscellaneous rollers
10.3 Scanning section
10.3.1 Cleaning of the scanning guide
10.3.2 Cleaning of the reflective sensor section
11. Periodical maintenance procedure DF-704
11.1 Take-up section
11.1.1 Cleaning of the pick-up roller/feed roller
11.1.2 Cleaning of the separation roller
11.1.3 Replacing the paper feed assy
11.1.4 Replacing the pick-up roller/feed roller
11.1.5 Replacing the separation roller assy
11.2 Transport section
11.2.1 Cleaning of the miscellaneous rolls
11.2.2 Cleaning of the miscellaneous rollers
11.3 Scanning section
11.3.1 Cleaning of the front side scanning guide
11.3.2 Cleaning of the reflective sensor section
12. Periodical maintenance procedure PC-110/PC-210
12.1 Paper feed section
12.1.1 Replacing the tray 3 feed roller, tray 3 pick-up roller, tray 3 separation roller
12.1.2 Replacing the tray 4 feed roller, tray 4 pick-up roller, tray 4 separation roller
13. Periodical maintenance procedure PC-115/PC-215
13.1 Paper feed section
13.1.1 Replacing the tray 3 feed roller, tray 3 pick-up roller, tray 3 separation roller
13.1.2 Replacing the tray 4 feed roller, tray 4 pick-up roller, tray 4 separation roller
14. Periodical maintenance procedure PC-410
14.1 Paper feed section
14.1.1 Replacing the feed roller, pick-up roller, separation roller
15. Periodical maintenance procedure PC-415
15.1 Paper feed section
15.1.1 Replacing the feed roller, pick-up roller, separation roller
16. Periodical maintenance procedure LU-207
16.1 Paper feed section
16.1.1 Replacing the pick-up roller
16.1.2 Replacing the feed roller
16.1.3 Replacing the separation roller
17. Periodical maintenance procedure LU-302
17.1 Paper feed section
17.1.1 Replacing the pick-up roller
17.1.2 Replacing the feed roller
17.1.3 Replacing the separation roller
18. Periodical maintenance procedure FS-534/FS-534SD
18.1 Paper exit section
18.1.1 Cleaning procedure for each rollers/each rolls
18.1.2 Cleaning the paddles
18.1.3 Replacing the paddle units
18.1.4 Cleaning procedure for each rollers/each rolls
18.1.5 Cleaning the upper paddle
18.1.6 Cleaning the lower paddle
18.1.7 Replacing the upper paddle assy
18.1.8 Replacing the lower paddle unit
19. Periodical maintenance procedure FS-533
19.1 Paper exit section
19.1.1 Cleaning procedure for each parts
19.1.2 Cleaning the paper exit paddle
19.2 Alignment section
19.2.1 Replacing the alignment roller assy F/R
20. Periodical maintenance procedure FS-537/FS-537SD
20.1 Paper exit section
20.1.1 Cleaning procedure for each rollers/each rolls (FS-537SD/FS-537)
20.1.2 Cleaning the paddles (FS-537SD/FS-537)
20.1.3 Replacing the paddle (FS-537SD/FS-537)
20.1.4 Cleaning the exit tray conveyance belt (FS-537SD)
20.1.5 Cleaning the upper paddle (FS-537SD)
20.1.6 Cleaning the lower paddle (FS-537SD)
20.1.7 Replacing the upper paddle (FS-537SD)
20.1.8 Replacing the lower paddle (FS-537SD)
20.2 Sensor section
20.2.1 FNS entrance sensor (PS34) (FS-537SD/FS-537)
20.2.2 FNS middle sensor (PS36) (FS-537SD/FS-537)
20.2.3 Main tray exit sensor (PS37) (FS-537SD/FS-537)
21. Periodical maintenance procedure ZU-609
21.1 Roller section
21.1.1 Cleaning of the Z fold roller
22. Periodical maintenance procedure JS-602
22.1 Paper exit section
22.1.1 Cleaning conveyance roller/paper exit roller
23. Periodical maintenance procedure PI-507
23.1 Paper feed section
23.1.1 Replacing the pick-up roller/Lw / feed roller/Lw
23.1.2 Replacing separation roller/Lw / torque limiter/Lw
24. Periodical maintenance procedure FS-536/FS-536SD
24.1 Paper exit section
24.1.1 Cleaning procedure for each rollers/each rolls (FS-536/FS-536SD)
24.1.2 Cleaning the paddle (FS-536/FS-536SD)
24.1.3 Replacing the paddle (FS-536/FS-536SD)
24.1.4 Cleaning the upper paddle (FS-536SD)
24.1.5 Cleaning the lower paddle (FS-536SD)
24.1.6 Replacing the upper paddle (FS-536SD)
24.1.7 Replacing the lower paddle (FS-536SD)
24.2 Sensor section
24.2.1 FNS entrance sensor (PS4) (FS-536SD/FS-536)
24.2.2 Main tray exit sensor (PS16) (FS-536SD/FS-536)

G) DISASSEMBLY/REASSEMBLY
1. Disassembly/adjustment prohibited items
1.1 Paint-locked screws
1.2 Red-painted screws
1.3 Variable resistors on board
1.4 Warnings for disassembly
1.5 Warnings / Precautions during setup or transportation
2. Units from which removing is prohibited
2.1 CCD board
2.1.1 Reason for prohibition
2.2 PH unit
2.2.1 Reason for prohibition
2.3 Fusing unit
2.3.1 Reason for prohibition
3. Disassembly/assembly warning/caution items
3.1 Removal/installing of PWBs
3.2 Use a special screw
4. Notes when transporting the machine
4.1 Protective materials
4.1.1 Protective materials for the photo conductors
4.1.2 Scanner packing bracket
5. bizhub C368/C308/C258
5.1 Disassembly/reassembly parts list
5.1.1 Exterior parts
5.1.2 Units
5.1.3 Boards
5.1.4 Motors
5.1.5 Clutches
5.1.6 Fan
5.1.7 etc
5.2 Disassembly/reassembly procedure (Exterior parts)
5.2.1 Scanner rear cover
5.2.2 Scanner right cover
5.2.3 Scanner front cover
5.2.4 Scanner left cover
5.2.5 Scanner upper rear cover
5.2.6 Control panel left cover/1
5.2.7 Control panel left cover/2
5.2.8 Control panel right cover
5.2.9 Control panel upper cover
5.2.10 Control panel front cover
5.2.11 Control panel unit
5.2.12 Original glass
5.2.13 Front door
5.2.14 Front lower cover
5.2.15 Front cover
5.2.16 Left cover
5.2.17 Exit tray
5.2.18 Rear right cover
5.2.19 Upper right cover
5.2.20 Lower rear cover
5.2.21 Protective sheet
5.2.22 Upper rear cover
5.2.23 Tray 1
5.2.24 Tray 2
5.3 Disassembly/reassembly procedure (Units)
5.3.1 LED exposure unit
5.3.2 Paper feed unit
5.3.3 PH unit
5.3.4 Sub hopper unit
5.3.5 Right door unit
5.3.6 Manual bypass tray unit
5.3.7 Regist unit
5.3.8 Hard disk (A)
5.3.9 Hard disk (A) Cover type
5.3.10 How to open the PWB box
5.3.11 Main drive unit
5.3.12 Transport unit
5.3.13 Fusing drive unit
5.3.14 Hopper drive unit
5.4 Disassembly/reassembly procedure (Boards)
5.4.1 CCD board (CCDB)
5.4.2 Tray 1 CD paper size board (CDPSB/1), tray 2 CD paper size board (CDPSB/2)
5.4.3 DC power supply (DCPU)
5.4.4 EEPROM/1, EEPROM/2
5.4.5 eMMC board (eMMC)
5.4.6 Tray 1 FD paper size board (FDPSB/1), tray 2 FD paper size board (FDPSB/2)
5.4.7 Front side board (FRB)
5.4.8 High voltage unit (HV)
5.4.9 Machine condition monitor board (MCMB)
5.4.10 MFP board (MFPB)
5.4.11 Tray 1 empty indicator board (PEIB/1), tray 2 empty indicator board (PEIB/2)
5.4.12 PH relay board (PHRYB)
5.4.13 Scanner drive board (SCDB)
5.5 Disassembly/reassembly procedure (Motors)
5.5.1 Transport motor (M1)
5.5.2 PC motor (M2)
5.5.3 Fusing motor (M3)
5.5.4 Switchback motor (M4)
5.5.5 ADU transport motor (M5)
5.5.6 Toner supply motor/K (M6)
5.5.7 Toner supply motor/C (M7)
5.5.8 Toner supply motor/M (M8)
5.5.9 Toner supply motor/Y (M9)
5.5.10 Toner cartridge motor/Y,M,C (M10)
5.5.11 Fusing pressure motor (M11)
5.5.12 Tray 1 lift-up motor (M12)
5.5.13 Tray 2 lift-up motor (M13)
5.5.14 Developing motor (M21)
5.5.15 Toner cartridge motor/K (M25)
5.5.16 Scanner motor (M201)
5.6 Disassembly/reassembly procedure (Clutches)
5.6.1 Tray 2 paper feed clutch (CL1)
5.6.2 Tray 2 vertical transport clutch (CL2)
5.6.3 Tray 1 paper feed clutch (CL3)
5.6.4 Registration clutch (CL4)
5.6.5 1st transfer pressure clutch (CL5)
5.6.6 ADU transport clutch (CL6)
5.6.7 Bypass paper feed clutch (CL7)
5.6.8 Paper exit clutch (CL8)
5.7 Disassembly/reassembly procedure (Fans)
5.7.1 Power supply cooling fan (FM1)
5.7.2 Transfer belt cleaner cooling fan (FM2)
5.7.3 Machine rear side cooling fan (FM3)
5.7.4 Toner cartridge cooling fan (FM4)
5.7.5 Paper cooling fan (FM8)
5.8 Disassembly/reassembly procedure (etc.)
5.8.1 Bypass pick-up solenoid (SD1)
5.8.2 IDC sensor shutter solenoid (SD2)
5.8.3 Gate switch solenoid (SD3)
5.8.4 Developing solenoid (SD4)
5.8.5 FAX speaker (SP1)
5.8.6 Bypass CD paper size VR (VR1)
5.8.7 UFP filter/ Deodorant filter
6. Bizhub C658/C558/C458
6.1 Disassembly/reassembly parts list
6.1.1 Exterior parts
6.1.2 Units
6.1.3 Boards
6.1.4 Motors
6.1.5 Clutches
6.1.6 Fan
6.1.7 etc
6.2 Disassembly/reassembly procedure (Exterior parts)
6.2.1 Scanner rear cover
6.2.2 Scanner right cover
6.2.3 Scanner front cover
6.2.4 Scanner left cover
6.2.5 Scanner upper rear cover
6.2.6 Control panel left cover
6.2.7 Control panel right cover
6.2.8 Control panel upper cover
6.2.9 Control panel front cover
6.2.10 Control panel unit
6.2.11 Original glass
6.2.12 Upper front door
6.2.13 Lower front door
6.2.14 Front lower cover
6.2.15 Front cover
6.2.16 Left cover
6.2.17 Exit cover
6.2.18 Output rear cover
6.2.19 Rear right cover
6.2.20 Upper right cover
6.2.21 Lower rear cover
6.2.22 DF cable cover
6.2.23 Duct cover/1
6.2.24 Duct cover/2, filter assy
6.2.25 Upper rear cover
6.2.26 Protective shield
6.2.27 Tray 1
6.2.28 Tray 2
6.3 Disassembly/reassembly procedure (Units)
6.3.1 LED exposure unit
6.3.2 Paper feed unit
6.3.3 PH unit
6.3.4 Sub hopper unit
6.3.5 Right door unit
6.3.6 Manual bypass tray unit
6.3.7 Regist unit
6.3.8 Hard disk (A)
6.3.9 How to open the PWB box/1
6.3.10 PWB box/2 (bizhub C658/C558)
6.3.11 Main drive unit
6.3.12 Transport unit
6.3.13 IH coil (IHC) (bizhub C658/C558)
6.3.14 Fusing drive unit (bizhub C658/C558)
6.3.15 Fusing drive unit (bizhub C458)
6.3.16 Hopper drive unit (bizhub C658/C558)
6.3.17 Hopper drive unit (bizhub C458)
6.3.18 ADU transport unit
6.3.19 Paper exit unit
6.4 Disassembly/reassembly procedure (Boards)
6.4.1 CCD board (CCDB)
6.4.2 Scanner drive board (SCDB)
6.4.3 Machine condition monitor board (MCMB)
6.4.4 Front side board (FRB)
6.4.5 DC power supply (DCPU)
6.4.6 PH relay board (PHRYB)
6.4.7 eMMC board (eMMC)
6.4.8 MFP board (MFPB)
6.4.9 EEPROM/1, EEPROM/2
6.4.10 High voltage unit (HV)
6.4.11 Expansion control board (EXCB)
6.4.12 Dual scan image processing board (DSIPB)
6.4.13 IH magnetic erasing board (IHMEB) (bizhub C658/C558)
6.4.14 IH power supply unit (IHPU)
6.4.15 NF board (NFB) (bizhub C658/C558)
6.4.16 Fusing power supply (FUPU) (bizhub C458)
6.4.17 Tray 1 FD paper size board (FDPSB/1), tray 2 FD paper size board (FDPSB/2)
6.4.18 Tray 1 CD paper size board (CDPSB/1), tray 2 CD paper size board (CDPSB/2)
6.4.19 Tray 1 empty indicator board (PEIB/1), tray 2 empty indicator board (PEIB/2)
6.5 Disassembly/reassembly procedure (Motors)
6.5.1 Transport motor (M1)
6.5.2 PC motor (M2)
6.5.3 Fusing motor (M3)
6.5.4 Switchback motor (M4)
6.5.5 ADU transport motor1 (M5)
6.5.6 Toner supply motor/K (M6)
6.5.7 Toner supply motor/C (M7) (bizhub C658/C558)
6.5.8 Toner supply motor/C (M7) (bizhub C458)
6.5.9 Toner supply motor/M (M8) (bizhub C658/C558)
6.5.10 Toner supply motor/M (M8) (bizhub C458)
6.5.11 Toner supply motor/Y (M9) (bizhub C658/C558)
6.5.12 Toner supply motor/Y (M9) (bizhub C458)
6.5.13 Toner cartridge motor/Y,M (M10) (bizhub C658/C558)
6.5.14 Toner cartridge motor/Y,M (M10) (bizhub C458)
6.5.15 Fusing pressure motor (M11)
6.5.16 Tray 1 lift-up motor (M12)
6.5.17 Tray 2 lift-up motor (M13)
6.5.18 Developing motor (M21)
6.5.19 Paper feed motor (M22)
6.5.20 Tray 2 vertical transport motor (M23)
6.5.21 Registration motor (M24) (bizhub C658)
6.5.22 Toner cartridge motor/C,K (M25) (bizhub C658/C558)
6.5.23 Toner cartridge motor/C,K (M25) (bizhub C458)
6.5.24 ADU transport motor2 (M26)
6.5.25 Scanner motor (M201)
6.6 Disassembly/reassembly procedure (Clutches)
6.6.1 Tray 2 paper feed clutch (CL1)
6.6.2 Registration clutch (CL4)
6.6.3 1st transfer pressure clutch (CL5)
6.6.4 Bypass paper feed clutch (CL7)
6.6.5 Paper exit clutch (CL8)
6.6.6 Paper exit deceleration clutch (CL9)
6.7 Disassembly/reassembly procedure (Fans)
6.7.1 Power supply cooling fan (FM1)
6.7.2 Transfer belt cleaner cooling fan (FM2)
6.7.3 Rear side cooling fan (FM3)
6.7.4 Toner cartridge cooling fan (FM4) (bizhub C658/C558)
6.7.5 Toner cartridge cooling fan (FM4) (bizhub C458)
6.7.6 IH coil cooling fan (FM7)
6.7.7 Paper cooling fan (FM8)
6.7.8 Toner suction fan (FM11)
6.7.9 Fusing power supply cooling fan (FM12)
6.7.10 UFP exhaust fan1 (FM17)
6.7.11 UFP exhaust fan2 (FM18)
6.8 Disassembly/reassembly procedure (etc.)
6.8.1 Bypass pick-up solenoid (SD1)
6.8.2 IDC sensor shutter solenoid (SD2)
6.8.3 Gate switch solenoid (SD3)
6.8.4 Developing solenoid (SD4)
6.8.5 Soaking roller pressure solenoid (SD5) (bizhub C658/C558)
6.8.6 FAX speaker (SP1)
6.8.7 Bypass CD paper size VR (VR1)
7. Dual scan document feeder
7.1 Disassembly/reassembly parts list
7.1.1 Exterior parts
7.1.2 Units
7.1.3 Boards
7.1.4 etc
7.2 Disassembly/reassembly procedure (dual scan document feeder/UK-501/SP-501)
7.2.1 Front cover (dual scan document feeder)
7.2.2 Rear cover (dual scan document feeder)
7.2.3 Lower guide assembly (dual scan document feeder)
7.2.4 Dual scan document feeder
7.2.5 Front side glass cleaning roller unit (dual scan document feeder)
7.2.6 Back side glass cleaning roller unit (dual scan document feeder)
7.2.7 CIS module (CIS) (dual scan document feeder)
7.2.8 DF control board (DFCB) (dual scan document feeder)
7.2.9 Restriction plate positional volume (VR1) (dual scan document feeder)
7.2.10 DF power supply (DFPU) (dual scan document feeder)
7.2.11 Sensor control board (SCB) (UK-501)
7.2.12 Multi feed detection board/1 (transmitter) (MFDB/1) (UK-501)
7.2.13 Multi feed detection board/2 (receiver) (MFDB/2) (UK-501)
7.2.14 Take-up motor (M1) (dual scan document feeder)
7.2.15 Registration motor (M2) (dual scan document feeder)
7.2.16 Reading motor (M3) (dual scan document feeder)
7.2.17 Exit motor (M4) (dual scan document feeder)
7.2.18 Reading roller pressure/retraction motor (M6) (dual scan document feeder)
7.2.19 Back side cleaning motor (M7) (dual scan document feeder)
7.2.20 Front side cleaning motor (M8) (dual scan document feeder)
7.2.21 Take-up clutch (CL1) (dual scan document feeder)
7.2.22 Cooling fan motor (FM) (dual scan document feeder)
7.2.23 Separation roller torque limiter (dual scan document feeder)
7.2.24 Stamp unit (SP-501)
7.2.25 Stamp (SP-501)
8. Option
8.1 Disassembly/reassembly parts list (bizhub C368/C308/C258)
8.1.1 DF-629
8.1.2 DF-704
8.1.3 PC-110/PC-210
8.1.4 PC-410
8.1.5 LU-302
8.1.6 FS-533
8.1.7 JS-506
8.1.8 PK-519
8.1.9 FS-534/FS-534SD
8.1.10 SD-511
8.1.11 RU-513
8.1.12 PK-520
8.1.13 SC-508
8.1.14 UK-211
8.1.15 UK-212
8.1.16 FK-515
8.1.17 FK-514
8.1.18 HD-524
8.1.19 CU-101
8.1.20 KP-101
8.2 Disassembly/reassembly parts list (bizhub C658/C558/C458)
8.2.1 PC-115/PC-215
8.2.2 PC-415
8.2.3 LU-207
8.2.4 LU-302
8.2.5 FS-533 (C558/C458 only)
8.2.6 JS-506 (C558/C458 only)
8.2.7 PK-519 (C558/C458 only)
8.2.8 FS-537/FS-537SD
8.2.9 FS-537SD saddle section
8.2.10 ZU-609
8.2.11 PK-523
8.2.12 JS-602
8.2.13 PI-507
8.2.14 FS-536/FS-536SD
8.2.15 FS-536SD saddle section
8.2.16 PK-520
8.2.17 RU-513
8.2.18 FK-515
8.2.19 FK-514
8.2.20 HD-524
8.2.21 CU-102
8.2.22 UK-212
8.2.23 SC-508
8.2.24 OT-506
8.2.25 KP-101
8.2.26 VI-510
8.3 Disassembly/reassembly procedure (DF-629/SP-501)
8.3.1 Front cover (DF-629)
8.3.2 Rear cover (DF-629)
8.3.3 Left cover unit (DF-629)
8.3.4 Reverse automatic document feeder (DF-629)
8.3.5 Glass cleaning roller unit (DF-629)
8.3.6 DF control board (DFCB) (DF-629)
8.3.7 Document width size sensor (VR1) (DF-629)
8.3.8 Document reading motor (M1) (DF-629)
8.3.9 Document feed motor (M2) (DF-629)
8.3.10 Registration motor (M3) (DF-629)
8.3.11 Glass cleaning motor (M4) (DF-629)
8.3.12 Reading roll release motor (M5) (DF-629)
8.3.13 DF cooling fan motor (FM1) (DF-629)
8.3.14 Document exit roller release solenoid (SD1) (DF-629)
8.3.15 Stamp unit (SP-501)
8.3.16 Stamp (SP-501)
8.4 Disassembly/reassembly procedure (DF-704/SP-501)
8.4.1 Front cover (DF-704)
8.4.2 Rear cover (DF-704)
8.4.3 Left cover unit (DF-704)
8.4.4 Dual scan document feeder (DF-704)
8.4.5 Front side glass cleaning roller unit (DF-704)
8.4.6 Back side glass cleaning roller unit (DF-704)
8.4.7 CIS module (CIS) (DF-704)
8.4.8 DF control board (DFCB) (DF-704)
8.4.9 Document width size sensor (VR1) (DF-704)
8.4.10 CIS power supply (CISPU) (DF-704)
8.4.11 Dual scan board (DSIPB) (DF-704)
8.4.12 Document reading motor (M1) (DF-704)
8.4.13 Document feed motor (M2) (DF-704)
8.4.14 Registration motor (M3) (DF-704)
8.4.15 Reading roller release motor (M4) (DF-704)
8.4.16 CIS cleaning motor (M5) (DF-704)
8.4.17 Document reading glass cleaning motor (M6) (DF-704)
8.4.18 DF cooling fan motor (FM1) (DF-704)
8.4.19 CIS cable (DF-704)
8.4.20 Stamp unit (SP-501)
8.4.21 Stamp (SP-501)
8.5 Disassembly/reassembly procedure (PC-110/PC-210)
8.5.1 Right door (PC-110/PC-210)
8.5.2 Rear right cover (PC-110/PC-210)
8.5.3 Rear cover (PC-110/PC-210)
8.5.4 Tray 3, tray 4 (PC-110/PC-210)
8.5.5 Paper feed cabinet (PC-110/PC-210)
8.5.6 Tray 3 paper feed unit (PC-110/PC-210)
8.5.7 Tray 4 paper feed unit (PC-210)
8.5.8 PC control board (PCCB) (PC-110/PC-210)
8.5.9 Tray 3 paper empty indicator board (PEIB/3), tray 4 paper empty indicator board (PEIB/4) (PC-110/PC-210)
8.5.10 Tray 3 FD paper size board (FDPSB/3), tray 4 FD paper size board (FDPSB/4) (PC-110/PC-210)
8.5.11 Tray 3 CD paper size board (CDPSB/3) (PC-110/PC-210)
8.5.12 Tray 4 CD paper size board (CDPSB/4) (PC-210)
8.5.13 Tray 3 paper feed motor (M111), tray 4 paper feed motor (M121) (PC-110/PC-210)
8.5.14 Tray 3 vertical transport motor (M112), tray 4 vertical transport motor (M122) (PC-110/PC-210)
8.5.15 Tray 3 lift-up motor (M113), tray 4 lift-up motor (M123) (PC-110/PC-210)
8.6 Disassembly/reassembly procedure (PC-115/PC-215)
8.6.1 Right door (PC-115/PC-215)
8.6.2 Rear right cover (PC-115/PC-215)
8.6.3 Rear cover (PC-115/PC-215)
8.6.4 Tray 3, tray 4 (PC-115/PC-215)
8.6.5 Paper feed cabinet (PC-115/PC-215)
8.6.6 Tray 3 paper feed unit (PC-115/PC-215)
8.6.7 Tray 4 paper feed unit (PC-215)
8.6.8 PC control board (PCCB) (PC-115/PC-215)
8.6.9 Tray 3 paper empty indicator board (PEIB/3), tray 4 paper empty indicator board (PEIB/4) (PC-115/PC-215)
8.6.10 Tray 3 FD paper size board (FDPSB/3), tray 4 FD paper size board (FDPSB/4) (PC-115/PC-215)
8.6.11 Tray 3 CD paper size board (CDPSB/3) (PC-115/PC-215)
8.6.12 Tray 4 CD paper size board (CDPSB/4) (PC-215)
8.6.13 Tray 3 paper feed motor (M111), tray 4 paper feed motor (M121) (PC-115/PC-215)
8.6.14 Tray 3 vertical transport motor (M112), tray 4 vertical transport motor (M122) (PC-115/PC-215)
8.6.15 Tray 3 lift-up motor (M113), tray 4 lift-up motor (M123) (PC-115/PC-215)
8.7 Disassembly/reassembly procedure (PC-410)
8.7.1 Right door (PC-410)
8.7.2 Rear right cover (PC-410)
8.7.3 Rear cover (PC-410)
8.7.4 Paper feed tray (PC-410)
8.7.5 Paper feed cabinet (PC-410)
8.7.6 Paper feed unit (PC-410)
8.7.7 PC control board (PCCB) (PC-410)
8.7.8 Tray 3 paper empty indicator board (PEIB/3) (PC-410)
8.7.9 Paper feed motor (M131) (PC-410)
8.7.10 Vertical transport motor (M132) (PC-410)
8.7.11 Elevator motor (M134) (PC-410)
8.7.12 Shifter motor (M133) (PC-410)
8.7.13 Wire (PC-410)
8.8 Disassembly/reassembly procedure (PC-415)
8.8.1 Right door (PC-415)
8.8.2 Rear right cover (PC-415)
8.8.3 Rear cover (PC-415)
8.8.4 Paper feed tray (PC-415)
8.8.5 Paper feed cabinet (PC-415)
8.8.6 Paper feed unit (PC-415)
8.8.7 PC control board (PCCB) (PC-415)
8.8.8 Tray 3 paper empty indicator board (PEIB/3) (PC-415)
8.8.9 Paper feed motor (M131) (PC-415)
8.8.10 Vertical transport motor (M132) (PC-415)
8.8.11 Elevator motor (M134) (PC-415)
8.8.12 Shifter motor (M133) (PC-415)
8.8.13 Wire (PC-415)
8.9 Disassembly/reassembly procedure (LU-207)
8.9.1 Right cover (LU-207)
8.9.2 Front cover (LU-207)
8.9.3 Rear cover (LU-207)
8.9.4 Feed cover (LU-207)
8.9.5 Large capacity unit (LU-207)
8.9.6 LU drive board (LUDB) (LU-207)
8.9.7 LU lift-up motor (M1) (LU-207)
8.9.8 LU paper feed motor (M2) (LU-207)
8.9.9 LU transport motor (M3) (LU-207)
8.9.10 Dehumidification heater (DH) (LU-207)
8.9.11 Lift wire (LU-207)
8.10 Disassembly/reassembly procedure (LU-302)
8.10.1 Upper door (LU-302)
8.10.2 Right cover (LU-302)
8.10.3 Front cover (LU-302)
8.10.4 Rear cover (LU-302)
8.10.5 Feed cover (LU-302)
8.10.6 Large capacity unit (LU-302)
8.10.7 LU drive board (LUDB) (LU-302)
8.10.8 LU lift-up motor (M1) (LU-302)
8.10.9 Dehumidification heater (DH) (LU-302)
8.10.10 Lift wire (LU-302)
8.11 Disassembly/reassembly procedure (FS-533)
8.11.1 Front cover (FS-533)
8.11.2 Upper cover (FS-533)
8.11.3 Rear cover (FS-533)
8.11.4 Finisher (FS-533)
8.11.5 Stapler unit (FS-533)
8.11.6 Paper exit tray unit (FS-533)
8.11.7 FS control board (FSCB) (FS-533)
8.11.8 Stapler relay board (STREYB) (FS-533)
8.11.9 Paper conveyance motor (M101) (FS-533)
8.11.10 Paper exit motor (M102) (FS-533)
8.11.11 Alignment roller motor (M103) (FS-533)
8.11.12 Exit roller lift up motor (M104) (FS-533)
8.11.13 Alignment motor/F (M105), Alignment motor/R (M106) (FS-533)
8.11.14 Stapler movement motor (M107) (FS-533)
8.11.15 Tray lift up motor (M109) (FS-533)
8.11.16 Paper surface detect solenoid (SD101) (FS-533)
8.11.17 Batch solenoid (SD102) (FS-533)
8.11.18 Paper exit roller solenoid (SD103) (FS-533)
8.11.19 Paper exit paddle (FS-533)
8.12 Disassembly/reassembly procedure (JS-506)
8.12.1 Exit tray 1 (JS-506)
8.12.2 Exit tray 2 (JS-506)
8.12.3 Job separator (JS-506)
8.12.4 Sensor unit (JS-506)
8.12.5 JS control board (JSCB) (JS-506)
8.12.6 Tray shift motor (M1) (JS-506)
8.13 Disassembly/reassembly procedure (PK-519)
8.13.1 Punch kit (PK-519)
8.13.2 PK control board (PKCB) (PK-519)
8.13.3 Punch motor (M201) (PK-519)
8.14 Disassembly/reassembly procedure (FS-534/FS-534SD/RU-513)
8.14.1 Rear cover (FS-534/FS-534SD)
8.14.2 Front door (FS-534/FS-534SD)
8.14.3 Front upper cover (FS-534/FS-534SD)
8.14.4 Left lower cover (FS-534/FS-534SD)
8.14.5 Front lower cover (FS-534/FS-534SD)
8.14.6 Finisher (FS-534/FS-534SD)
8.14.7 Relay unit (RU-513)
8.14.8 Stapler unit (FS-534/FS-534SD)
8.14.9 Sensor unit (FS-534/FS-534SD)
8.14.10 Saddle unit (FS-534SD)
8.14.11 FS control board (FSCB) (FS-534/FS-534SD)
8.14.12 FNS entry transport motor (M2) (FS-534/FS-534SD)
8.14.13 FNS discharge motor (M3) (FS-534/FS-534SD)
8.14.14 Receiving roller retraction motor (M4) (FS-534/FS-534SD)
8.14.15 FNS paddle motor (M5) (FS-534/FS-534SD)
8.14.16 Trailing edge stopper motor (M6) (FS-534/FS-534SD)
8.14.17 Alignment motor/front (M7) (FS-534/FS-534SD)
8.14.18 Alignment motor/rear (M8) (FS-534/FS-534SD)
8.14.19 Pre-eject drive motor (M9) (FS-534/FS-534SD)
8.14.20 Bundle eject motor (M10) (FS-534/FS-534SD)
8.14.21 Main tray up/down motor (M11) (FS-534/FS-534SD)
8.14.22 Paper receiving control motor (M12) (FS-534/FS-534SD)
8.14.23 Side stapler movement motor (M13) (FS-534/FS-534SD)
8.15 Disassembly/reassembly procedure (SD-511)
8.15.1 Front cover (SD-511)
8.15.2 Paper exit tray (SD-511)
8.15.3 Staple unit (SD-511)
8.15.4 SD drive board (SDDB) (SD-511)
8.15.5 SD transport motor (M1) (SD-511)
8.15.6 Paper discharge control motor (M2) (SD-511)
8.15.7 Alignment motor (M3) (SD-511)
8.15.8 Stopper drive motor (M4) (SD-511)
8.15.9 Center fold roller motor (M5) (SD-511)
8.15.10 Tri-folding guide motor (M6) (SD-511)
8.15.11 SD paddle motor (M7) (SD-511)
8.15.12 Center fold guide motor (M8) (SD-511)
8.15.13 Center fold knife motor (M9) (SD-511)
8.15.14 Stopper solenoid (SD1) (SD-511)
8.16 Disassembly/reassembly procedure (FS-537/FS-537SD)
8.16.1 Upper cover/1 (FS-537/FS-537SD)
8.16.2 Upper cover/2 (FS-537/FS-537SD)
8.16.3 Upper cover/3 (FS-537/FS-537SD)
8.16.4 Rear cover (FS-537/FS-537SD)
8.16.5 Front door (FS-537/FS-537SD)
8.16.6 Front upper cover (FS-537/FS-537SD)
8.16.7 Front lower cover (FS-537/FS-537SD)
8.16.8 Main tray (Paper exit lower tray) (FS-537/FS-537SD)
8.16.9 Sub tray (Paper exit upper tray) (FS-537/FS-537SD)
8.16.10 Left upper cover (FS-537/FS-537SD)
8.16.11 Left lower cover (FS-537/FS-537SD)
8.16.12 Finisher (FS-537/FS-537SD)
8.16.13 Relay unit (FS-537/FS-537SD)
8.16.14 Sensor unit (FS-537/FS-537SD)
8.16.15 Stapler unit (FS-537/FS-537SD)
8.16.16 FS control board (FSCB) (FS-537/FS-537SD)
8.16.17 Bundle eject motor (M1) / Pre-eject drive motor (M2) / Stacker plate drive motor (M3)
8.16.18 Route change gate motor (M4) (FS-537/FS-537SD)
8.16.19 Main tray up/down motor (M6) (FS-537/FS-537SD)
8.16.20 Paddle up/down motor (M7) / Arm drive motor (M8) / FNS paddle motor (M9) (FS-537/FS-537SD)
8.16.21 Receiving roller retraction motor (M10) (FS-537/FS-537SD)
8.16.22 Trail edge stopper motor/R (M11) (FS-537/FS-537SD)
8.16.23 Trail edge stopper motor/F (M12) (FS-537/FS-537SD)
8.16.24 Alignment motor/rear (M13) (FS-537/FS-537SD)
8.16.25 Alignment motor/front (M14) (FS-537/FS-537SD)
8.16.26 Paper receiving control motor (M15) (FS-537/FS-537SD)
8.16.27 SD discharge motor (M16) (FS-537/FS-537SD)
8.16.28 FNS discharge motor (M17) (FS-537/FS-537SD)
8.16.29 Sub tray discharge motor (M18) (FS-537/FS-537SD)
8.16.30 Stapler movement motor (M19) (FS-537/FS-537SD)
8.16.31 FNS entry transport motor (M20) (FS-537/FS-537SD)
8.16.32 ZU Discharge Motor (M21) (FS-537/FS-537SD)
8.17 Disassembly/reassembly procedure (FS-537SD saddle section)
8.17.1 Front cover (FS-537SD saddle section)
8.17.2 Saddle unit (FS-537SD saddle section)
8.17.3 Exit tray (FS-537SD saddle section)
8.17.4 Staple unit (FS-537SD saddle section)
8.17.5 SD control board (SDCB) (FS-537SD saddle section)
8.17.6 SD transport motor (M1) (FS-537SD saddle section)
8.17.7 Paper discharge control motor (M2) (FS-537SD saddle section)
8.17.8 Alignment motor (M3) (FS-537SD saddle section)
8.17.9 Stopper drive motor (M4) (FS-537SD saddle section)
8.17.10 Center fold roller motor (M5) (FS-537SD saddle section)
8.17.11 Center fold guide motor (M6) (FS-537SD saddle section)
8.17.12 SD paddle motor (M7) (FS-537SD saddle section)
8.17.13 Tri-folding guide motor (M8) (FS-537SD saddle section)
8.17.14 Center fold knife motor (M9) (FS-537SD saddle section)
8.17.15 Paper transport belt motor (M34) (FS-537SD saddle section)
8.17.16 Stopper solenoid (SD1) (FS-537 saddle section)
8.18 Disassembly/reassembly procedure (ZU-609)
8.18.1 Z Folding unit (ZU-609)
8.18.2 ZU drive board (ZUDB) (ZU-609)
8.18.3 ZU relay board (ZURB) (ZU-609)
8.18.4 ZU transport motor (M500) (ZU-609)
8.18.5 Folding guide motor (M501) (ZU-609)
8.18.6 Pressure motor (M502) (ZU-609)
8.19 Disassembly/reassembly procedure (PK-523)
8.19.1 Punch Kit (PK-523)
8.19.2 Punch control board (PKCB) (PK-523)
8.19.3 Paper size detect board (PSDTB) (PK-523)
8.19.4 Punch oscillating motor (M302) (PK-523)
8.20 Disassembly/reassembly procedure (JS-602)
8.20.1 Paper exit tray (JS-602)
8.20.2 Front cover (JS-602)
8.20.3 Rear cover (JS-602)
8.20.4 Job separator (JS-602)
8.20.5 Entrance switching solenoid (SD401) (JS-602)
8.21 Disassembly/reassembly procedure (PI-507)
8.21.1 Upper cover (PI-507)
8.21.2 Rear cover (PI-507)
8.21.3 Operation panel cover assy (PI-507)
8.21.4 Post Inserter (PI-507)
8.21.5 PI drive board (PIDB) (PI-507)
8.21.6 PI operation board (PIOB) (PI-507)
8.21.7 PI relay board (PIRB) (PI-507)
8.21.8 Tray lift motor /Lw (M202) (PI-507)
8.21.9 Transfer motor (M203) (PI-507)
8.21.10 Transport roller drive motor (M204) (PI-507)
8.21.11 Folding guide motor (M501) (PI-507)
8.21.12 Transfer clutch /Lw (CL202) (PI-507)
8.21.13 Registration clutch (CL203) (PI-507)
8.21.14 Pick-up solenoid /Lw (SD202) (PI-507)
8.21.15 Paper size VR /Lw (VR202) (PI-507)
8.22 Disassembly/reassembly procedure (FS-536/FS-536SD)
8.22.1 Rear cover (FS-536/FS-536SD)
8.22.2 Front door (FS-536/FS-536SD)
8.22.3 Front upper cover (FS-536/FS-536SD)
8.22.4 Left lower cover (FS-536/FS-536SD)
8.22.5 Front lower cover (FS-536/FS-536SD)
8.22.6 Finisher (FS-536/FS-536SD)
8.22.7 Relay unit (FS-536/FS-536SD)
8.22.8 Sensor unit (FS-536/FS-536SD)
8.22.9 Stapler unit (FS-536/FS-536SD)
8.22.10 FS control board (FSCB) (FS-536/FS-536SD)
8.22.11 FNS entry transport motor (M2) (FS-536/FS-536SD)
8.22.12 FNS discharge motor (M3) (FS-536/FS-536SD)
8.22.13 Receiving roller retraction motor (M4) (FS-536/FS-536SD)
8.22.14 FNS paddle motor (M5) (FS-536/FS-536SD)
8.22.15 Trailing edge stopper motor (M6) (FS-536/FS-536SD)
8.22.16 Alignment motor/front (M7) (FS-536/FS-536SD)
8.22.17 Alignment motor/rear (M8) (FS-536/FS-536SD)
8.22.18 Pre-eject drive motor (M9) (FS-536/FS-536SD)
8.22.19 Bundle eject motor (M10) (FS-536/FS-536SD)
8.22.20 Main tray up/down motor (M11) (FS-536/FS-536SD)
8.22.21 Paper receiving control motor (M12) (FS-536/FS-536SD)
8.22.22 Side stapler movement motor (M13) (FS-536/FS-536SD)
8.23 Disassembly/reassembly procedure (FS-536SD saddle section)
8.23.1 Front cover (FS-536SD saddle section)
8.23.2 Saddle unit (FS-536SD saddle section)
8.23.3 Exit tray (FS-536SD saddle section)
8.23.4 Staple unit (FS-536SD saddle section)
8.23.5 SD control board (SDCB) (FS-536SD saddle section)
8.23.6 SD transport motor (M1) (FS-536SD saddle section)
8.23.7 Paper discharge control motor (M2) (FS-536SD saddle section)
8.23.8 Alignment motor (M3) (FS-536SD saddle section)
8.23.9 Stopper drive motor (M4) (FS-536SD saddle section)
8.23.10 Center fold roller motor (M5) (FS-536SD saddle section)
8.23.11 Center fold guide motor (M6) (FS-536SD saddle section)
8.23.12 SD paddle motor (M7) (FS-536SD saddle section)
8.23.13 Tri-folding guide motor (M8) (FS-536SD saddle section)
8.23.14 Center fold knife motor (M9) (FS-536SD saddle section)
8.23.15 Stopper solenoid (SD1) (FS-536 saddle section)
8.24 Disassembly/reassembly procedure (PK-520)
8.24.1 Punch kit (PK-520)
8.25 Disassembly/reassembly procedure (RU-513)
8.25.1 RU transport motor (M1)
8.26 Disassembly/reassembly procedure (SC-508)
8.26.1 DSC board/1 (for front side) (SC-508) (bizhub C368/C308/C258)
8.26.2 DSC board/2 (for back side) (SC-508) (bizhub C368/C308/C258)
8.26.3 DSC board/1 (for front side) (SC-508) (bizhub C658/C558/C458)
8.26.4 DSC board/2 (for back side) (SC-508) (bizhub C658/C558/C458)
8.27 Disassembly/reassembly procedure (UK-211)
8.27.1 Upgrade kit (UK-211)
8.28 Disassembly/reassembly procedure (UK-212)
8.28.1 Upgrade kit (UK-212) (bizhub C368/C308/C258)
8.28.2 Upgrade kit (UK-212) (bizhub C658/C558/C458)
8.29 Disassembly/reassembly procedure (FK-515)
8.29.1 FAX board (line 3), FAX board (line 4) (FK-515)
8.30 Disassembly/reassembly procedure (FK-514)
8.30.1 FAX Kit (Line1), FAX Kit (Line2) (FK-514)
8.30.2 FAX Kit (Line1), FAX Kit (Line2) (FK-514) (with MK-742)
8.31 Disassembly/reassembly procedure (HD-524)
8.31.1 Hard disk (B) (HD-524) (bizhub C368/C308/C258)
8.31.2 Hard disk (B) (HD-524: Cover type) (bizhub C368/C308/C258)
8.31.3 Hard disk (B) (bizhub C658/C558/C458)
8.32 Disassembly/reassembly procedure (CU-101)
8.32.1 Clean unit cover
8.32.2 Clean unit (CU-101)
8.32.3 Clean unit drive board (CUDB)
8.32.4 Exhaust fan/1 (FM14)
8.32.5 Exhaust fan/2 (FM15)
8.32.6 Suction fan (FM16)
8.32.7 Deodorant filter/UFP filter
8.33 Disassembly/reassembly procedure (CU-102)
8.33.1 Clean unit (CU-102)
8.33.2 Clean unit drive board (CUDB)
8.33.3 Exhaust fan/1 (FM14)
8.33.4 Exhaust fan/2 (FM15)
8.33.5 UFP filter
8.34 Disassembly/reassembly procedure (OT-506)
8.34.1 Paper exit tray
8.35 Disassembly/reassembly procedure (KP-101)
8.35.1 Keypad (KP-101)
8.36 Disassembly/reassembly procedure (VI-510)
8.36.1 Video Interface Kit (VI-510)
9. COMMERCIALLY AVAILABLE PARTS
9.1 Installing the key counter (bizhub C368/C308/C258)
9.1.1 Configuration
9.1.2 Procedure
9.2 Installing the key counter (bizhub C658/C558/C458)
9.2.1 Configuration
9.2.2 Procedure
9.3 Installing the original size sensor/2 (Option)

H) CLEANING/LUBRICATION
1. Bizhub C658/C558/C458/C368/C308/C258
1.1 Cleaning parts list
1.2 Lubrication parts list
1.3 Cleaning procedure
1.3.1 Transfer belt unit (bizhub C368/C308/C258)
1.3.2 Transfer belt unit (bizhub C658/C558/C458)
1.3.3 PH window (bizhub C368/C308/C258)
1.3.4 PH window (bizhub C658/C558/C458)
1.3.5 Tray 1 feed roller, tray 1 pick-up roller, tray 1 separation roller (bizhub C368/C308/C258)
1.3.6 Tray 1 feed roller, tray 1 pick-up roller, tray 1 separation roller (bizhub C658/C558/C458)
1.3.7 Tray 2 feed roller, tray 2 pick-up roller, tray 2 separation roller (bizhub C368/C308/C258)
1.3.8 Tray 2 feed roller, tray 2 pick-up roller, tray 2 separation roller (bizhub C658/C558/C458)
1.3.9 Tray 2 transport roller
1.3.10 Manual bypass tray feed roller
1.3.11 Manual bypass tray separation roller
1.3.12 Original glass (bizhub C368/C308/C258)
1.3.13 Original glass (bizhub C658/C558/C458)
1.3.14 Scanner rails
1.3.15 Mirrors
1.3.16 Lens
1.3.17 CCD sensor
2. Dual scan document feeder
2.1 Cleaning parts list
2.2 Cleaning procedure
2.2.1 Back side scanning glass
2.2.2 Back side scanning guide/Back side scanning shading shaft
3. Option
3.1 Cleaning parts list (bizhub C368/C308/C258)
3.1.1 DF-704
3.1.2 PC-110/PC-210
3.1.3 PC-410
3.1.4 LU-302
3.2 Cleaning parts list (bizhub C658/C558/C458)
3.2.1 PC-115/PC-215
3.2.2 PC-415
3.2.3 LU-207
3.2.4 LU-302
3.2.5 PI-507
3.3 Cleaning procedure (DF-704)
3.3.1 Back side scanning glass
3.3.2 Back side scanning guide/Back side scanning shading shaft
3.4 Cleaning procedure (PC-110/PC-210)
3.4.1 Tray 3 feed roller, tray 3 pick-up roller, tray 3 separation roller
3.4.2 Tray 4 feed roller, tray 4 pick-up roller, tray 4 separation roller
3.4.3 Tray 3 vertical transport roller, tray 4 vertical transport roller
3.5 Cleaning procedure (PC-115/PC-215)
3.5.1 Tray 3 feed roller, tray 3 pick-up roller, tray 3 separation roller
3.5.2 Tray 4 feed roller, tray 4 pick-up roller, tray 4 separation roller
3.5.3 Tray 3 vertical transport roller, tray 4 vertical transport roller
3.6 Cleaning procedure (PC-410)
3.6.1 Feed roller, Pick-up roller, Separation roller
3.6.2 Vertical transport roller
3.7 Cleaning procedure (PC-415)
3.7.1 Feed roller, Pick-up roller, Separation roller
3.7.2 Vertical transport roller
3.8 Cleaning procedure (LU-207)
3.8.1 Pick-up roller
3.8.2 Feed roller
3.8.3 Separation roller
3.8.4 Conveyance roller
3.9 Cleaning procedure (LU-302)
3.9.1 Pick-up roller
3.9.2 Feed roller
3.9.3 Separation roller
3.9.4 Duplex transport roller
3.10 Cleaning procedure (PI-507)
3.10.1 Pick-up roller/Lw, feed roller/Lw, separation roller/Lw
3.10.2 Conveyance roller/Lw

I) ADJUSTMENT/SETTING
1. How To Use The Adjustment/Setting Section
1.1 How to use the adjustment/setting section
1.2 Advance checks
2. List of utility mode
List of utility mode (outline)
(1) Starting procedure
(2) Exiting procedure
2.1 One-Touch/User Box Registration
2.2 User Settings List
2.2.1 System Settings
2.2.2 Custom Display Settings
2.2.3 Copier Settings
2.2.4 Scan/Fax Settings
2.2.5 Fax Settings
2.2.6 Printer Settings
2.2.7 Change Password
2.2.8 Change E-Mail Address
2.2.9 Register Authentication Information
2.2.10 Synchronize User Auth. and Account Track
2.3 Administrator Settings List [1/2]
Administrator settings outline 1/2
2.3.1 System Settings
2.3.2 Administrator/Machine Settings
2.3.3 One-Touch/User Box Registration
2.3.4 User Authentication/Account Track
2.3.5 Network Settings
2.3.6 Copier Settings
2.3.7 Printer Settings
2.3.8 Fax Settings
2.3.9 System Connection
2.4 Administrator Settings List [2/2]
Administrator settings outline 2/2
2.4.1 Security Settings
2.4.2 License Settings
2.4.3 Authorization function Setting
2.4.4 Voice Guidance Settings
2.4.5 OpenAPI Certification Management Setting
2.4.6 External Memory Backup
2.4.7 Remote Access Setting
2.4.8 Eco Copier Settings
2.5 Administrator Shortcut Settings
2.5.1 Administrator Shortcut Settings [1/2]
2.5.2 Administrator Shortcut Settings [2/2]
2.6 Check Consumables List
2.6.1 Check Consumable Life [1/2]
2.6.2 Check Consumable Life [2/2]
2.7 Banner Printing
2.8 My Panel Settings
2.9 Device Information List
2.9.1 Device Information [1/2]
2.9.2 Device Information [2/2]
2.10 Remote Panel Operation List
2.11 Supplementary explanation of utility mode
2.11.1 User Authentication/Account Track-Authentication Device Settings
2.11.2 Network Settings-Network Fax Settings
2.11.3 Network Settings-Network I/F Configuration
2.11.4 Network Settings-Wireless Network Setting
2.11.5 Network Settings-IWS Settings
2.11.6 Network Settings – Remote Panel Settings (outline)
2.11.7 Network Settings – Remote Panel Settings (Server Settings)
2.11.8 Network Settings – Remote Panel Settings (Client Settings)
2.11.9 Machine Update Settings – Internet ISW Settings
2.11.10 Machine Update Settings – Machine Auto Update setting
2.11.11 Machine Update Settings – HTTP Proxy Settings
2.11.12 Security Settings – Prohibited Functions When Authentication Error
2.11.13 Security Settings – Enhanced Security Mode
2.11.14 Security Settings – HDD Encryption Setting
2.11.15 Security Settings – Debug Log Encryption Settings
2.11.16 Security Settings – Image Log Transfer Settings (Type1)
2.11.17 Security Settings – Image Log Transfer Settings (Type2)
2.11.18 Security Settings – Driver Password Encryption Setting
2.11.19 Security Settings – Quick Security Setting – Administrator Password
2.11.20 Security Settings – Quick Security Setting – USB Enable Settings
2.11.21 Security Settings – Quick Security Setting – Password Rules
2.11.22 Security Settings – Quick Security Setting – Quick IP Filtering
2.11.23 Security Settings – Quick Security setting – PSWC Setting
2.11.24 Security Settings – Quick Security setting – Security Warning Display Setting
2.11.25 License Settings
2.11.26 Voice Guidance Settings-Voice Guidance
2.11.27 External Memory Backup – Import/Export
2.11.28 Remote Access Setting – Import/Export User Data
3. ADJUSTMENT ITEM LIST
3.1 Replace feed roller, pick-up roller, separation roller (tray 1, tray 2)
3.2 Replace feed roller, separation roller assy (manual bypass tray)
3.3 Install LCT (Built-in)
3.4 Replace CCD board
3.5 Replace developing unit
3.6 Replace drum unit
3.7 Replace transfer belt unit
3.8 Replace fusing unit
3.9 Replace PH unit
3.10 Replace original size detection sensor
3.11 Replace scanner motor
3.12 Replace scanner home sensor
3.13 Replace MFP board
3.14 Replace eMMC board
3.15 Replace original glass
3.16 Replace hard disk
3.17 Replace control panel unit
3.18 Replace DF control board (when DF is mounted)
3.19 Replace Multi feed detection board (installed with double feed detection Kit UK-501)
3.20 Add key counter
3.21 Execute initialize
3.22 Add an optional device
3.23 Execute F/W update
3.24 Add fax board
3.25 Mount DF-629
3.26 Mount DF-704
3.27 Replace CIS module (when DF-704 is mounted)
3.28 Replace Dual scan document feeder
4. LIST OF SERVICE MODE
4.1 List of service mode (outline) (bizhub C658/C558/C458/C368/C308/C258)
4.2 List of service mode (detail)
4.2.1 Machine (bizhub C658/C558/C458/C368/C308/C258)
4.2.2 Imaging Process Adjustment (bizhub C658/C558/C458/C368/C308/C258)
4.2.3 CS Remote Care (bizhub C658/C558/C458/C368/C308/C258)
4.2.4 System 1
4.2.5 System 2 (bizhub C658/C558/C458/C368/C308/C258)
4.2.6 Counter
4.2.7 List Output
4.2.8 State Confirmation
4.2.9 Test Mode
4.2.10 ADF
4.2.11 FAX
4.2.12 Finisher (bizhub C658/C558/C458/C368/C308/C258)
4.2.13 Network Settings (bizhub C658/C558/C458/C368/C308/C258)
4.2.14 Machine Update Setting
5. SERVICE MODE
5.1 Starting/Setting/Exiting
5.1.1 Starting procedure
5.1.2 Setting procedure
5.1.3 Exiting procedure
5.2 Time Zone/Date & Time Input mode
5.2.1 Use
5.2.2 Procedure
5.3 Search
5.3.1 Use
5.3.2 Procedure
5.4 Machine
5.4.1 Trail Edge Adjust (bizhub C658/C558/C458)
5.4.2 Fusing Temperature (bizhub C658/C558/C458/C368/C308/C258)
5.4.3 Fusing Transport Speed (bizhub C658/C558/C458/C368/C308/C258)
5.4.4 Heater Control Level (bizhub C458/C368/C308/C258)
5.4.5 Printer Area
5.4.6 Scan Area
5.4.7 Printer Reg. Loop Adj
5.4.8 Color Registration Adjustment
5.4.9 Print Head Skew Adj
5.4.10 LD adjustment (bizhub C658/C558/C458/C368/C308/C258)
5.4.11 Manual Bypass Tray Width Adj
5.4.12 Lead Edge Erase Adjustment
5.4.13 Non-Image Area Erase Check
5.4.14 ADF Scan Glass Contamination
5.4.15 PPM Control Choice
5.4.16 High Humidity PPM Adjustment (bizhub C658/C558)
5.4.17 Exhaust Fan Stop Delay
5.5 Firmware Version
5.5.1 Use
5.5.2 Procedure
5.6 Imaging Process Adjustment
5.6.1 Gradation Adjust
5.6.2 Image Stabilization
5.6.3 Density Balance Adjust (bizhub C658/C558/C458)
5.6.4 Max Image Density Adj
5.6.5 Image Background Adj
5.6.6 Paper Separation Adjustment
5.6.7 Monochrome Density Adjustment
5.6.8 Removable Voltage Adjust
5.6.9 TCR Level Setting
5.6.10 Transfer Voltage Fine Adj
5.6.11 Charge AC Output fine adjustment
5.6.12 Thick Paper Density Adjustment
5.6.13 Grad/Dev AC Bias V Selection
5.6.14 Manual Toner Add
5.7 CS Remote Care (Outlines)
5.8 Setting up the CS Remote Care
5.8.1 Using the telephone line modem
5.8.2 Using the Fax line modem
5.8.3 Using the E-mail
5.8.4 When using a WebDAV server in http communication
5.9 Software SW setting for CS Remote Care
List of software SW for CS Remote Care
5.9.1 Input procedure
5.9.2 List of software SW for CS Remote Care
5.9.3 SW No. 01
5.9.4 SW No. 02
5.9.5 SW No. 03
5.9.6 SW No. 04
5.9.7 SW No. 05
5.9.8 SW No. 06
5.9.9 SW No. 07
5.9.10 SW No. 08
5.9.11 SW No. 09
5.9.12 SW No. 10
5.9.13 SW No. 11
5.9.14 SW No. 12
5.9.15 SW No. 14
5.9.16 SW No. 15
5.9.17 SW No. 18
5.9.18 SW No. 21
5.9.19 SW No. 22
5.9.20 SW No. 23
5.10 Setup confirmation
5.11 Calling the maintenance
5.11.1 When starting the maintenance
5.11.2 When finishing the maintenance
5.12 Calling the center from the administrator
5.13 Checking the transmission log
5.14 Detail on settings for CS Remote Care
5.14.1 Maintenance/Default Settings – System Selection
5.14.2 Maintenance/Default Settings – ID Code
5.14.3 Maintenance/Default Settings – Detail Setting
5.14.4 Maintenance/Default Settings – Server Setting (E-Mail1 or E-mail2 is selected.)
5.14.5 Maintenance/Default Settings – Server Setting (http1 or http2 is selected)
5.14.6 Product Auth. Settings
5.14.7 Import/Export Settings
5.14.8 Auto Initial Dial Setting (bizhub C658/C558/C458/C368/C308/C258)
5.15 System 1
5.15.1 Marketing Area
5.15.2 Tel/Fax Number
5.15.3 Serial Number
5.15.4 Sleep ON/OFF Choice Setting
5.15.5 Foolscap Size Setting
5.15.6 Original Size Detection
5.15.7 Install Date
5.15.8 Initialization-Clear All Data
5.15.9 Initialization-Clear Individual Data
5.15.10 Initialization-System Error Clear
5.15.11 Problem Unit Isolation Set
5.15.12 Post card transfer table
5.15.13 Warm-up (bizhub C658/C558/C458/C368/C308/C258)
5.15.14 Machine State LED Setting
5.15.15 TP Level
5.15.16 Burn Prevention Settings
5.16 System 2
5.16.1 HDD
5.16.2 Image Controller Setting
5.16.3 Option Board Status
5.16.4 Consumable Life Reminder
5.16.5 Unit Change
5.16.6 Software Switch Setting
5.16.7 CCD Calibration
5.16.8 LCT (Built-in) Size Settings
5.16.9 LCT Paper Size Setting (bizhub C658/C558/C458/C368/C308/C258)
5.16.10 Paper Reuse Box Setting
5.16.11 Line Mag Setting
5.16.12 Data Capture
5.16.13 ADF Scan Glass Contamin. Set
5.16.14 Stamp
5.16.15 Network Fax Settings
5.16.16 RX File Change Page Name
5.16.17 ADF Settings
5.16.18 Image Stabilization Setting
5.16.19 Multifeed Sensor Status (bizhub C658/C558/C458)
5.16.20 User Paper Settings
5.16.21 Coverage Rate Screen
5.16.22 JAM Code Display Setting
5.16.23 Purge Setting (bizhub C658/C558/C458)
5.16.24 Import Config. Data (bizhub C658/C558/C458/C368/C308/C258)
5.16.25 Install Data
5.16.26 Local Interface Kit Setting
5.16.27 CIS Image Adjustment
5.16.28 Display Eco Index
5.16.29 Internal Error. Auto Cancel
5.16.30 Acquiring Settings
5.16.31 Driver Install
5.16.32 Application Change Setting
5.16.33 Custom Pattern
5.16.34 Maintenance Mode
5.16.35 Smart Fusing Control
5.16.36 Cleaning Unit Setting (bizhub C658/C558/C458/C368/C308/C258)
5.16.37 Auth. Function Enable
5.17 Counter
5.17.1 Common procedure
5.17.2 Life (bizhub C658/C558/C458/C368/C308/C258)
5.17.3 Service Call
5.17.4 Section Service Call
5.17.5 Warning
5.17.6 Maintenance
5.17.7 Service Total
5.17.8 Counter of Each Mode
5.17.9 Service Call History (Data)
5.17.10 ADF Paper Pages
5.17.11 Paper Jam History
5.17.12 Fax Connection Error
5.17.13 ADF Scan Glass Contamin. Counter
5.17.14 Parts Counter (Fixed)
5.17.15 Jam
5.17.16 Section JAM
5.17.17 Instantaneous Power Failure
5.17.18 Detail code history
5.18 List Output
5.18.1 Batch list CSV output
5.18.2 Machine Management List
5.18.3 Adjustments List
5.18.4 Parameter List
5.18.5 Service Parameter
5.18.6 Protocol Trace
5.18.7 Fax Setting List
5.18.8 Fax Analysis List
5.19 State Confirmation
5.19.1 Sensor Check (bizhub C658/C558/C458/C368/C308/C258)
5.19.2 Table Number
5.19.3 Level History 1
5.19.4 Level History 2
5.19.5 Temp. & Humidity
5.19.6 CCD Check
5.19.7 Memory/Storage Adjustment
5.19.8 Memory/Storage Status
5.19.9 Color Regist
5.19.10 Load Check (bizhub C658/C558/C458/C368/C308/C258)
5.19.11 Adjustment Data List (bizhub C658/C558/C458/C368/C308/C258)
5.19.12 Self-diagnostic
5.20 Test Mode
5.20.1 Procedure for test pattern output
5.20.2 Gradation Pattern (bizhub C658/C558/C458/C368/C308/C258)
5.20.3 Halftone Pattern
5.20.4 Lattice Pattern
5.20.5 Solid Pattern
5.20.6 Color Sample
5.20.7 8 Color Solid Pattern
5.20.8 CMM pattern
5.20.9 Paper Passage Test
5.20.10 Fax Test-Signal Send Test
5.20.11 Fax Test-Signal Receive Test
5.20.12 Fax Test-NCU TEST
5.20.13 Fax Test-Dial Test
5.20.14 Fax Test – Off-hook Test
5.21 ADF
5.21.1 Original Stop Position (bizhub C658/C558/C458/C368/C308/C258)
5.21.2 Registration Loop Adj
5.21.3 Auto Stop Position Adjustment (bizhub C658/C558/C458/C368/C308/C258)
5.21.4 Paper Passage
5.21.5 Sensor Check
5.21.6 Original Tray Width (bizhub C658/C558/C458/C368/C308/C258)
5.21.7 Read Pos Adj
5.21.8 Feed Zoom
5.21.9 Scanning Light Adjustment
5.21.10 Mixed original size adjustment
5.21.11 Home Read Position Adjust
5.21.12 FD-Mag. Adj. (B)
5.21.13 Main Scanning Direction Zoom
5.21.14 Skew Measurement
5.21.15 ADF automatic Adjustment (bizhub C658/C558/C458/C368/C308/C258)
5.21.16 Multi-Feed DetectionAdj (bizhub C658/C558/C458)
5.22 FAX (Line1)
FAX Setting (Line1)
5.22.1 Modem/NCU
5.22.2 Network
5.22.3 System
5.22.4 Fax File Format
5.22.5 Communication
5.22.6 List Output
5.22.7 Function Parameter
5.22.8 Initialization
5.22.9 FAX Line Std. Setting
5.23 FAX setting (Line2, Line 3, Line 4)
5.23.1 Modem/NCU
5.23.2 Network
5.23.3 Communication
5.23.4 Initialize
5.23.5 FAX Line Std. Setting
5.24 FAX setting (Address parameter list: for line 1, line 2, line 3 and line 4)
5.24.1 0b000#
5.24.2 0b001#
5.24.3 0b002#
5.24.4 0b003#
5.24.5 0b004#, 0b005#
5.24.6 0b006#
5.24.7 0e000#
5.24.8 0e001#
5.24.9 0e002#
5.24.10 0e003#
5.24.11 0e004#
5.24.12 0e005#
5.24.13 12000#
5.24.14 13000#
5.24.15 13001#, 13002#
5.24.16 13003#
5.24.17 13004#
5.24.18 13005#
5.24.19 13006#
5.24.20 13007#
5.24.21 13008#
5.24.22 98000#
5.25 FAX setting (Address parameter list: for line 1)
5.25.1 0e009#
5.25.2 0e00a#
5.25.3 0e00b#
5.25.4 0e00c#
5.25.5 0e00d#
5.25.6 0e00e#
5.25.7 0e00f#
5.25.8 0e010#
5.25.9 0e011#
5.25.10 0e012#
5.25.11 0f000#
5.25.12 0f001#
5.25.13 10000#
5.25.14 10001#
5.26 FAX setting (Address parameter list: for line 2)
5.26.1 0e01a#
5.26.2 0e01b#
5.26.3 0e01c#
5.26.4 0e01d#
5.26.5 0e01e#
5.26.6 0e01f#
5.26.7 0e020#
5.26.8 0e021#
5.26.9 0e022#
5.26.10 0e023#
5.26.11 0f002#
5.26.12 0f003#
5.26.13 10002#
5.26.14 10003#
5.27 FAX setting (Address parameter list: for line 3)
5.27.1 0e02b#
5.27.2 0e02c#
5.27.3 0e02d#
5.27.4 0e02e#
5.27.5 0e02f#
5.27.6 0e030#
5.27.7 0e031#
5.27.8 0e032#
5.27.9 0e033#
5.27.10 0e034#
5.27.11 0f004#
5.27.12 0f005#
5.27.13 10004#
5.27.14 10005#
5.28 FAX setting (Address parameter list: for line 4)
5.28.1 0e03c#
5.28.2 0e03d#
5.28.3 0e03e#
5.28.4 0e03f#
5.28.5 0e040#
5.28.6 0e041#
5.28.7 0e042#
5.28.8 0e043#
5.28.9 0e044#
5.28.10 0e045#
5.28.11 0f006#
5.28.12 0f007#
5.28.13 10006#
5.28.14 10007#
5.29 Finisher
5.29.1 FS-FN adjustment – Center Staple Position (FS-534SD/FS-536SD/FS-537SD)
5.29.2 FS-FN adjustment – Half-Fold Position (FS-534SD/FS-536SD/FS-537SD)
5.29.3 FS-FN adjustment – Punch Centering Fine Adj (PK-523) (bizhub C658/C558/C458)
5.29.4 FS-FN adjustment – Punch F. Sensor Intensity Adj. (PK-523) (bizhub C658/C558/C458)
5.29.5 FS-FN adjustment – Punch vertical position (Z-fold) (ZU-609/PK-523) (bizhub C658/C558/C458)
5.29.6 FS-FN adjustment – Punch horizontal position (Z-fold) (ZU-609/PK-523) (bizhub C658/C558/C458)
5.29.7 FS-FN adjustment – Resist loop size (Z-fold) (ZU-609) (bizhub C658/C558/C458)
5.29.8 FS-FN adjustment – Punch Registration Loop Adj (PK-523) (bizhub C658/C558/C458)
5.29.9 FS-FN adjustment – Punch Resist Loop Size (PI) (PI-507/PK-523) (bizhub C658/C558/C458)
5.29.10 FS-FN adjustment – 1st Z-Fold Position/2nd Z-Fold Position (ZU-609) (bizhub C658/C558/C458)
5.29.11 FS-FN adjustment – 1st Tri-Fold Adjustment/2nd Tri-Fold Adjustment (FS-534SD/FS-536SD/FS-537SD)
5.29.12 FS-FN adjustment – Punch Edge Adj (PK-520/PK-523) (bizhub C658/C558/C458/C368/C308/C258)
5.29.13 FS-FN adjustment – Punch Regist Loop Size (PK-519/PK-520)
5.29.14 FS-FN adjustment – PI Size Detection (PI-507) (bizhub C658/C558/C458)
5.29.15 FS-FN adjustment – Post Inserter Adjustment (PI-507) (bizhub C658/C558/C458)
5.29.16 FS-FN adjustment – Finisher Components Test Mode (FS-533/FS-534/FS-534SD/FS-536/FS-536SD/FS-537/
FS-537SD) (bizhub C658/C558/C458/C368/C308/C258)
5.29.17 FS-FN adjustment – Alignment plate Position (FS-533)
5.29.18 FS-FN adjustment – Paper Alignment Guides W. Adj. (FS-534/FS-534SD/FS-536/FS-536SD/FS-537/FS-537SD)I-413
5.29.19 FS-FN adjustment – ZFold1st Fold Loop Size (ZU-609) (bizhub C658/C558/C458)
5.29.20 FS-FN adjustment – ZFold2nd Fold Loop Size (ZU-609) (bizhub C658/C558/C458)
5.29.21 FS-FN adjustment – ZFold2nd Fold Speed (ZU-609) (bizhub C658/C558/C458)
5.29.22 FS-FN adjustment – ZFold Adjust Custom (ZU-609) (bizhub C658/C558/C458)
5.29.23 Max Staple Limit Setting (FS-536SD/FS-537SD) (bizhub C658/C558/C458)
5.29.24 Punch Option Setting (PK-519/PK-520/PK-523/ZU-609) (bizhub C658/C558/C458/C368/C308/C258)
5.29.25 Max. # of Folded Sheets Setting (FS-534/FS-534SD/FS-536/FS-536SD/FS-537/FS-537SD) (bizhub C658/C558/
C458/C368/C308/C258)
5.29.26 Tri-Fold Output Setting (FS-537SD) (bizhub C658/C558/C458)
5.29.27 Job Separator
5.30 Network Settings
5.30.1 2nd Network Setting – 2nd network card settings
5.30.2 2nd Network Setting – Network Interface Settings
5.30.3 2nd Network Setting – SSID
5.30.4 2nd Network Setting – Authentication/Encryption Algorithm
5.30.5 2nd Network Setting – WEP Key
5.30.6 2nd Network Setting – Passphrase
5.30.7 2nd Network Setting – Wireless Channel
5.30.8 2nd Network Setting – ANY Connection
5.30.9 2nd Network Setting – Connect permission extension address list
5.30.10 2nd Network Setting – DHCP Server Setting
5.30.11 2nd Network Setting – TCP/IP Settings
5.30.12 Remote Service Setting (bizhub C658/C558/C458/C368/C308/C258)
5.31 Machine Update Setting
5.31.1 Internet ISW – Internet ISW Set
5.31.2 Internet ISW – HTTP Setting
5.31.3 Internet ISW – FTP Setting
5.31.4 Internet ISW – Forwarding Access Setting
5.31.5 Internet ISW – Download
5.31.6 Internet ISW – Update Start Time Settings
5.31.7 Machine Auto Update setting – Auto Update setting
5.31.8 Machine Auto Update setting – Relay server setting
5.31.9 Machine Auto Update setting – Transmission log Update
5.31.10 Machine Auto Update setting – Transmission Server Log
5.31.11 Machine Auto Update setting – Update Log Display
5.31.12 Machine Auto Update setting – Relay Server Log Confirmation
5.31.13 Machine Auto Update setting – Manual Update
5.31.14 Machine Auto Update setting – Machine Import setting
5.31.15 Machine Auto Update setting – Machine Export setting
5.31.16 Machine Auto Update setting – Machine Update Password
5.31.17 Firmware Rollback
5.31.18 Copy Network Settings
6. SETUP WIZARD
6.1 Function outline
6.1.1 Setup Wizard list
6.2 Starting/Exiting
6.2.1 Starting procedure
6.2.2 Exiting procedure
7. ENHANCED SECURITY (bizhub C658/C558/C458/C368/C308/C258)
7.1 List of Enhanced Security
7.2 Starting/Exiting
7.2.1 Starting procedure
7.2.2 Exiting procedure
7.3 Enhanced Security
7.3.1 CE Password
7.3.2 Administrator Password
7.3.3 Administrator Feature Level
7.3.4 CE Authentication
7.3.5 Life Stop Setting
7.3.6 Memory Data Backup
7.3.7 operation Ban release time
7.3.8 Administrator unlocking
7.3.9 Engine FW DipSW (bizhub C658/C558/C458/C368/C308/C258)
7.3.10 Engine Data Backup
7.3.11 HDD Data Backup
7.3.12 Data Backup
7.3.13 ADF Data Backup
7.3.14 Customer Type
7.3.15 TPM Setting
8. BILLING SETTING
Billing Setting
8.1 List of billing setting
8.2 Starting/Exiting
8.2.1 Starting procedure
8.2.2 Exiting procedure
8.3 BILLING SETTING
8.3.1 Counter Setting
8.3.2 Management Function Choice
8.3.3 Management Function Choice – Key Counter IF Vendor
8.3.4 Management Function Choice – Key Counter Only
8.3.5 Management Function Choice – Management Device-2
8.3.6 Management Function Choice – Vendor 2
8.3.7 Authentication Device 2 (bizhub C658/C558/C458/C368/C308/C258)
8.3.8 Setting items that automatically change the setting values (bizhub C658/C558/C458/C368/C308/C258)
8.3.9 Coverage Rate Clear
8.3.10 License management – Activation
8.3.11 License management – Deactivation
8.3.12 License management – Repair(bizhub (C658/C558/C458/C368/C308/C258)
8.3.13 License management – Initialize
8.3.14 License management – Request Code
8.3.15 License management – List
8.3.16 License management – Function List
8.3.17 Manage OpenAPI Authentication
8.3.18 WebDAV Server Setting
8.3.19 Coverage Counter Setting
8.3.20 Print Counter Clear
8.3.21 Coverage Counter Detail
9. DEBUG SETTINGS
Debug Settings
9.1 List of debug settings
9.2 Starting/Exiting
xxviii
9.2.1 Starting procedure
9.2.2 Exiting procedure
9.3 DEBUG SETTINGS
9.3.1 Debug Log Output
9.3.2 Acquiring Mode
9.3.3 TX Debug Log Settings
9.3.4 Remote Log Retrieval
9.3.5 Remote Log Server Settings
9.3.6 Enable Core Dump
9.3.7 USB Password
9.3.8 Other
9.4 Operation of the debug log function
9.4.1 Basic mode
9.4.2 Enhance mode
10. CONTENTS TO BE CLEARED BY RESET FUNCTION
11. MECHANICAL ADJUSTMENT bizhub C368/C380/C258
11.1 Scanner section
11.1.1 Adjustment of the scanner motor belt
11.2 Paper feed section
11.2.1 Centering adjustment of the tray 1/2
11.2.2 Pick-up pressure adjustment of the tray 1/2
11.2.3 Separator roller pressure adjustment of the bypass tray
11.2.4 Adjustment of the bypass CD paper size VR
11.3 Fusing section
11.3.1 Adjusting the parallelism of the fusing unit path
12. MECHANICAL ADJUSTMENT bizhub C658/C558/C458
12.1 Scanner section
12.1.1 Adjustment of the scanner motor belt
12.1.2 Print Head Skew Adj
12.2 Document feed section
12.2.1 Centering adjustment of the tray 1/2
12.2.2 Pick-up pressure adjustment of the tray 1/2
12.2.3 Separator roller pressure adjustment of the bypass tray
12.2.4 Adjustment of the bypass CD paper size VR
12.3 Fusing section
12.3.1 Adjusting the parallelism of the fusing unit path
13. MECHANICAL ADJUSTMENT dual scan document feeder
13.1 Original document feed section
13.1.1 Adjusting the height on dual scan document feeder
13.1.2 Adjusting front side skew feed on dual scan document feeder
13.1.3 Adjusting back side skew feed on dual scan document feeder
13.1.4 Adjusting the pressure of the separation roller
13.1.5 Adjusting multi-feed detection UK-501
14. MECHANICAL ADJUSTMENT DF-629
14.1 Original document feed section
14.1.1 Adjusting the height
14.1.2 Adjusting front side skew feed on ADF
14.1.3 Adjusting the pressure of the separation roller
15. MECHANICAL ADJUSTMENT DF-704
15.1 Original document feed section
15.1.1 Adjusting the height
15.1.2 Adjusting front side skew feed on ADF
15.1.3 Adjusting back side skew feed on ADF
15.1.4 Adjusting the pressure of the separation roller
16. MECHANICAL ADJUSTMENT PC-110/PC-210
16.1 Paper reference position
16.1.1 Purpose
16.1.2 Procedure
17. MECHANICAL ADJUSTMENT PC-115/PC-215
17.1 Paper reference position
17.1.1 Purpose
17.1.2 Procedure
18. MECHANICAL ADJUSTMENT PC-410
18.1 Paper reference position
18.1.1 Purpose
18.1.2 Procedure
18.2 Shifter movement timing belt adjustment
18.2.1 Procedure
19. MECHANICAL ADJUSTMENT PC-415
19.1 Paper reference position
19.1.1 Purpose
19.1.2 Procedure
19.2 Shifter movement timing belt adjustment
19.2.1 Procedure
20. MECHANICAL ADJUSTMENT LU-207
20.1 Document feed section
20.1.1 Changing the paper size
20.1.2 Centering adjustment of the LCT
20.1.3 Pick-up roller load adjustment of the LCT
21. MECHANICAL ADJUSTMENT LU-302
21.1 Paper feed section
21.1.1 Centering adjustment of the LCT
21.1.2 Pick-up roller load adjustment of the LCT
22. MECHANICAL ADJUSTMENT PK-519
22.1 Punch section
22.1.1 Punch hole deviation correction
23. MECHANICAL ADJUSTMENT PK-520
23.1 Punch section
23.1.1 Punch hole deviation correction
24. MECHANICAL ADJUSTMENT FS-534SD
24.1 Paper exit section
24.1.1 Half-fold skew adjustment
25. MECHANICAL ADJUSTMENT PK-523
25.1 Punch section
25.1.1 Punch hole deviation correction
26. MECHANICAL ADJUSTMENT FS-537SD saddle secrtion
26.1 Paper exit section
26.1.1 Half-fold skew adjustment
27. MECHANICAL ADJUSTMENT FD-536SD saddle section
27.1 Paper exit section
27.1.1 Half-fold skew adjustment

J) REWRITING OF FIRMWARE
REWRITING OF FIRMWARE (bizhub C658/C558/C458/C368/C308/C258)
1. Confirming the firmware version
1.1 Procedure
2. USB memory (bizhub C368/C308/C258)
2.1 Preparation
2.1.1 System preparation
2.1.2 USB memory used to update firmware
2.2 Procedure
2.3 Action when data transfer fails
2.4 Entering the machine type information
3. USB memory (bizhub C658/C558/C458)
3.1 Preparation
3.1.1 System preparation
3.1.2 USB memory used to update firmware
3.2 Procedure
3.3 Action when data transfer fails
3.4 Entering the machine type information
4. Internet ISW (bizhub C368/C308/C258)
4.1 Preparations for firmware rewriting
4.1.1 Outline
4.1.2 Service environment
4.1.3 Preparations for firmware rewriting
4.2 Making the firmware data
4.2.1 Outline
4.2.2 Procedure
4.3 Firmware rewriting from the control panel
4.3.1 Firmware rewriting from the control panel
5. Internet ISW (bizhub C658/C558/C458)
5.1 Preparations for firmware rewriting
5.1.1 Outline
5.1.2 Service environment
5.1.3 Preparations for firmware rewriting
5.2 Making the firmware data
5.2.1 Outline
5.2.2 Procedure
5.3 Firmware rewriting from the control panel
5.3.1 Firmware rewriting from the control panel
6. CS Remote Care
6.1 Firmware rewriting from the CS Remote Care
7. Auto Update setting (bizhub C368/C308/C258)
7.1 Outline
7.2 Service environment
7.3 Procedures for rewriting the firmware by using the Auto Update function
7.3.1 Preparations
7.3.2 Download the firmware data automatically from the program server
8. Auto Update setting (bizhub C658/C558/C458)
8.1 Outline
8.2 Service environment
8.3 Procedures for rewriting the firmware by using the Auto Update function
8.3.1 Preparations
8.3.2 Download the firmware data automatically from the program server
9. Firmware Distribute Server function (Relay server) (bizhub C368/C308/C258)
9.1 Outline
9.2 Service environment
9.3 Firmware relay procedures by using “relay server function”
9.3.1 Preparations
9.3.2 Download and open the relay data automatically from the program server
9.3.3 Download the firmware opened from the relay server by using the Auto Update function on the other MFP
10. Firmware Distribute Server function (Relay server) (bizhub C658/C558/C458)
10.1 Outline
10.2 Service environment
10.3 Firmware relay procedures by using “relay server function”
10.3.1 Preparations
10.3.2 Download and open the relay data automatically from the program server
10.3.3 Download the firmware opened from the relay server by using the Auto Update function on the other MFP
11. How to install the i-Option data
11.1 Available function for i-Option
11.2 LK-107/LK-108 font data installation procedure
12. Creating back up files when updating firmware (bizhub C368/C308/C258)
12.1 Procedure
13. Creating back up files when updating firmware (bizhub C658/C558/C458)
13.1 Procedure

K) TROUBLESHOOTING
1. JAM CODE
(1) JAM display
(2) Misfeed display resetting procedure
1.1 List of the JAM code (bizhub C368/C308/C258)
1.2 List of the JAM code (bizhub C658/C558/C458)
1.3 JAM that do not display the JAM code
1.4 Sensor layout
1.4.1 bizhub C368/C308/C258
1.4.2 bizhub C658/C558/C458
1.4.3 Dual scan document feeder
1.4.4 DF-704
1.4.5 DF-629
1.4.6 PC-110/PC-115/PC-210/PC-215
1.4.7 PC-410/PC-415
1.4.8 LU-207/LU-302
1.4.9 FS-533/PK-519
1.4.10 FS-534/PK-520/FS-534SD
1.4.11 FS-536/FS-536SD/PK-520
1.4.12 FS-537/FS-537SD/PK-523/PI-507/ZU-609
1.4.13 JS-602
1.5 Initial check items
1.6 Jam when thin or thick paper is fed
1.6.1 Paper jam for thin paper
1.6.2 Paper jam for thick paper
1.7 1#-## (bizhub C368/C308/C258)
1.7.1 10-01, 10-02, 10-40
1.7.2 11-01, 11-02, 11-40
1.7.3 12-01, 12-40
1.7.4 13-01, 13-40
1.7.5 14-01, 14-40
1.7.6 15-01, 15-40
1.7.7 16-01, 16-40
1.7.8 17-20
1.8 1#-## (bizhub C658/C558/C458)
1.8.1 10-01, 10-02, 10-04, 10-40
1.8.2 11-01, 11-02, 11-04, 11-40, 11-44
1.8.3 12-01, 12-40
1.8.4 13-01, 13-40
1.8.5 14-01, 14-40
1.8.6 15-01, 15-40
1.8.7 16-01, 16-40
1.9 2#-## (bizhub C368/C308/C258)
1.9.1 20-01, 20-02
1.9.2 20-21
1.9.3 20-22
1.10 2#-## (bizhub C658/C558/C458)
1.10.1 20-01, 20-02, 20-04
1.10.2 20-21
1.10.3 20-22
1.11 3#-## (bizhub C368/C308/C258)
1.11.1 30-03
1.11.2 32-01, 32-05
1.12 3#-## (bizhub C658/C558/C458)
1.12.1 30-03
1.12.2 32-01, 32-05, 32-30
1.13 6#-## (bizhub C368/C308/C258)
1.13.1 66-01, 66-11, 66-21
1.13.2 66-02, 66-12
1.13.3 66-03, 66-13, 66-23, 66-33
1.13.4 66-04, 66-14, 66-24, 66-34
1.13.5 66-05, 66-06, 66-15
1.13.6 66-07
1.14 6#-## (bizhub C658/C558/C458)
1.14.1 66-02, 66-12
1.14.2 66-03, 66-13, 66-23, 66-33
1.14.3 66-04, 66-14
1.14.4 66-05, 66-06
1.14.5 66-08
1.14.6 66-54
1.15 7#-## (bizhub C368/C308/C258)
1.15.1 72-14
1.15.2 72-15
1.15.3 72-16
1.15.4 72-17
1.15.5 72-18
1.15.6 72-19
1.15.7 72-21
1.15.8 72-22
1.15.9 72-23
1.15.10 72-25
1.15.11 72-26
1.15.12 72-43
1.15.13 72-70
1.15.14 72-81
1.15.15 72-85
1.15.16 72-86
1.15.17 72-87
1.15.18 75-42
1.15.19 75-43
1.16 7#-## (bizhub C658/C558/C458)
1.16.1 72-11
1.16.2 72-14
1.16.3 72-15
1.16.4 72-16
1.16.5 72-17
1.16.6 72-18
1.16.7 72-19
1.16.8 72-21
1.16.9 72-22
1.16.10 72-23
1.16.11 72-25, 72-26
1.16.12 72-31, 72-34
1.16.13 72-35
1.16.14 72-40, 72-41
1.16.15 72-43
1.16.16 72-49
1.16.17 72-50
1.16.18 72-51
1.16.19 72-70
1.16.20 72-81
1.16.21 72-84
1.16.22 72-85
1.16.23 72-86
1.16.24 72-87
1.16.25 75-42
1.16.26 75-43
1.17 9#-## (bizhub C368/C308/C258)
1.17.1 92-01, 92-02, 92-40
1.17.2 93-10
1.17.3 99-01
1.17.4 99-02
1.17.5 99-03
1.17.6 99-04
1.17.7 99-05
1.17.8 99-06
1.17.9 99-07
1.17.10 99-08
1.17.11 99-09
1.18 9#-## (bizhub C658/C558/C458)
1.18.1 92-01, 92-02, 92-04, 92-40
1.18.2 93-10
1.18.3 99-01
1.18.4 99-02
1.18.5 99-03
1.18.6 99-04
1.18.7 99-05
1.18.8 99-06
1.18.9 99-07
1.18.10 99-08
1.18.11 99-09
2. MALFUNCTION CODE
2.1 Display procedure
2.2 List of the malfunction code (bizhub C658/C558/C458/C368/C308/C258)
2.3 S-1 (bizhub C658/C558/C458/C368/C308/C258)
2.3.1 Contents
2.3.2 Procedure
2.4 S-2 (bizhub C658/C558/C458/C368/C308/C258)
2.4.1 Contents
2.4.2 Procedure
2.5 D-1 (bizhub C368/C308/C258)
2.5.1 Contents
2.5.2 Procedure
2.6 D-1 (bizhub C658/C558/C458)
2.6.1 Contents
2.6.2 Procedure
2.7 D-3 (bizhub C658/C558/C458/C368/C308/C258)
2.7.1 Contents
2.7.2 Procedure
2.8 P-5, P-28 (bizhub C658/C558/C458/C368/C308/C258)
2.8.1 Contents
2.8.2 Procedure
2.9 P-6, P-7, P-8, P-9 (bizhub C658/C558/C458/C368/C308/C258)
2.9.1 Contents
2.9.2 Procedure
2.10 P-14 (bizhub C658/C558/C458/C368/C308/C258)
2.10.1 Contents
2.10.2 Procedure
2.11 P-21 (bizhub C658/C558/C458/C368/C308/C258)
2.11.1 Contents
2.11.2 Procedure
2.12 P-22 (bizhub C658/C558/C458/C368/C308/C258)
2.12.1 Contents
2.12.2 Procedure
2.13 P-27 (bizhub C658/C558/C458/C368/C308/C258)
2.13.1 Contents
2.13.2 Procedure
2.14 P-32 (bizhub C658/C558)
2.14.1 Contents
2.14.2 Procedure
2.15 P-33 (bizhub C658/C558/C458/C368/C308/C258)
2.15.1 Contents
2.15.2 Procedure
3. TROUBLE CODE
3.1 Display procedure
3.2 Trouble resetting procedure
3.2.1 Trouble resetting procedure by Trouble Reset key
3.2.2 Trouble resetting procedure by the auto cancel function
3.2.3 Trouble resetting procedure by remote operation
3.3 Trouble isolation function
3.4 List of the trouble code (bizhub C358/C308/C258)
3.5 List of the trouble code (bizhub C658/C558/C458)
3.6 C0### (bizhub C368/C308/C258)
3.6.1 C0002
3.6.2 C0106
3.6.3 C0107
3.6.4 C0108
3.6.5 C0109
3.6.6 C0202
3.6.7 C0204
3.6.8 C0206
3.6.9 C0208
3.6.10 C0210
3.6.11 C0211
3.6.12 C0214
3.6.13 C0216
3.7 C0### (bizhub C658/C558/C458)
3.7.1 C0002
3.7.2 C0106
3.7.3 C0107
3.7.4 C0108
3.7.5 C0109
3.7.6 C0202
3.7.7 C0204
3.7.8 C0206
3.7.9 C0208
3.7.10 C0210
3.7.11 C0211
3.7.12 C0214
3.7.13 C0216
3.8 C1### (bizhub C368/C308/C258)
3.8.1 C1004
3.8.2 C1081
3.8.3 C1102
3.8.4 C1103
3.8.5 C1105
3.8.6 C1106
3.8.7 C1109
3.8.8 C1112
3.8.9 C1113
3.8.10 C1114
3.8.11 C1115
3.8.12 C1132
3.8.13 C1140
3.8.14 C1141
3.8.15 C1144
3.8.16 C1145
3.8.17 C1156
3.8.18 C1182
3.8.19 C1184
3.8.20 C1195
3.8.21 C1196
3.8.22 C1197
3.8.23 C11A1
3.8.24 C11A2
3.8.25 C11E1
3.8.26 C1402
3.9 C1### (bizhub C658/C558/C458)
3.9.1 C1003, C1013
3.9.2 C1004, C1014
3.9.3 C1007, C1017
3.9.4 C1081, C1082
3.9.5 C1102
3.9.6 C1103
3.9.7 C1104
3.9.8 C1105
3.9.9 C1106
3.9.10 C1109
3.9.11 C1112
3.9.12 C1113
3.9.13 C1114
3.9.14 C1115
3.9.15 C1124
3.9.16 C1125
3.9.17 C1127
3.9.18 C1130
3.9.19 C1131
3.9.20 C1132
3.9.21 C1133
3.9.22 C1140
3.9.23 C1141
3.9.24 C1142
3.9.25 C1143
3.9.26 C1144
3.9.27 C1145
3.9.28 C1146
3.9.29 C1152
3.9.30 C1156
3.9.31 C1182
3.9.32 C1184
3.9.33 C1195
3.9.34 C1196
3.9.35 C1197
3.9.36 C11A1
3.9.37 C11A2
3.9.38 C11C5
3.9.39 C11E1
3.9.40 C11E2
3.9.41 C1402
3.9.42 C1403
3.9.43 C1404
3.10 C2### (bizhub C368/C308/C258)
3.10.1 C2152, C2153, C2154, C2155, C2156
3.10.2 C2253, C2254
3.10.3 C2255, C2256
3.10.4 C2355
3.10.5 C2411, C2412, C2413, C2414
3.10.6 C2551, C2553, C2555
3.10.7 C2552, C2554, C2556, C2558
3.10.8 C2557
3.10.9 C2559, C255A, C255B
3.10.10 C255C
3.10.11 C2561, C2562, C2563, C2564
3.10.12 C2650
3.10.13 C2A11, C2A12, C2A13, C2A14
3.10.14 C2A21, C2A22, C2A23, C2A24
3.11 C2### (bizhub C658/C558/C458)
3.11.1 C2152, C2153, C2154, C2155, C2156
3.11.2 C2253, C2254
3.11.3 C2255, C2256
3.11.4 C2350
3.11.5 C2355
3.11.6 C2411, C2412, C2413, C2414
3.11.7 C2551, C2553, C2555, C2557
3.11.8 C2552, C2554, C2556, C2558
3.11.9 C2559, C255A, C255B, C255C
3.11.10 C2561, C2562, C2563, C2564
3.11.11 C2650, C265B
3.11.12 C265A
3.11.13 C2A11, C2A12, C2A13, C2A14
3.11.14 C2A21, C2A22, C2A23, C2A24
3.12 C3### (bizhub C368/C308/C258)
3.12.1 C3101, C3103
3.12.2 C3201, C3202
3.12.3 C3302
3.12.4 C3425
3.12.5 C3722, C3725, C3726
3.12.6 C3731
3.12.7 C3825, C3826
3.12.8 C3922, C3925, C3926
3.12.9 C392A
3.12.10 C392B
3.13 C3### (bizhub C658/C558/C458)
3.13.1 C3101, C3103
3.13.2 C3102
3.13.3 C3201, C3202
3.13.4 C3302
3.13.5 C3425
3.13.6 C3722, C3725, C3726
3.13.7 C3732, C3736, C3737, C3738, C3739
3.13.8 C3822, C3825, C3826
3.13.9 C3922, C3925, C3926
3.13.10 C392A
3.13.11 C392B
3.13.12 C3B02, C3B03
3.13.13 C3B07, C3B08
3.13.14 C3B09
3.14 C4###
3.14.1 C4091 (bizhub C368/C308/C258)
3.14.2 C40A1, C40A2, C40A3, C40A4, C40C3, C40C5 (bizhub C658/C558/C458/C368/C308/C258)
3.14.3 C4101 (bizhub C658/C558/C458/C368/C308/C258)
3.14.4 C4501 (bizhub C658/C558/C458/C368/C308/C258)
3.15 C5### (bizhub C368/C308/C258)
3.15.1 C5102, C5103
3.15.2 C5351
3.15.3 C5355
3.15.4 C5360
3.15.5 C5370
3.15.6 C5501
3.15.7 C5601
3.15.8 C5603
3.15.9 C5604
3.15.10 C5605, C5606
3.15.11 C5610
3.15.12 C5611
3.16 C5### (bizhub C658/C558/C458)
3.16.1 C5102, C5103
3.16.2 C5304
3.16.3 C5306
3.16.4 C5351
3.16.5 C5355
3.16.6 C5358
3.16.7 C5360
3.16.8 C5361
3.16.9 C5370
3.16.10 C5501
3.16.11 C5601
3.16.12 C5603
3.16.13 C5605, C5606
3.16.14 C5610
3.17 C6###
3.17.1 C6001 (bizhub C368/C308/C258)
3.17.2 C6001 (bizhub C658/C558/C458)
3.17.3 C6002 (bizhub C658/C558/C458/C368/C308/C258)
3.17.4 C6102, C6103 (bizhub C658/C558/C458/C368/C308/C258)
3.17.5 C6104, C6105 (bizhub C368/C308/C258)
3.17.6 C6104, C6105 (bizhub C658/C558/C458)
3.17.7 C6704 (bizhub C658/C558/C458/C368/C308/C258)
3.17.8 C6751 (bizhub C658/C558/C458/C368/C308/C258)
3.17.9 C6752 (bizhub C658/C558/C458/C368/C308/C258)
3.17.10 C6753 (bizhub C368/C308/C258)
3.17.11 C6753 (bizhub C658/C558/C458)
3.17.12 C6754, C6755 (bizhub C368/C308/C258)
3.17.13 C6754, C6755 (bizhub C658/C558/C4588)
3.17.14 C6756 (bizhub C658/C558/C458/C368/C308/C258)
3.17.15 C6901, C6902, C6903 (bizhub C658/C558/C458/C368/C308/C258)
3.17.16 C6911, C6912, C6913 (bizhub C368/C308/C258)
3.17.17 C6911, C6912, C6913 (bizhub C658/C558/C458)
3.17.18 C6F01, C6F02, C6F03, C6F04, C6F05, C6F07, C6F08, C6F09, C6F0A, C6FFDC, C6FDD (bizhub C658/C558/C458/
C368/C308/C258)
3.18 C8### (bizhub C368/C308/C258)
3.18.1 C8101
3.18.2 C8107
3.18.3 C8302
3.18.4 C8401
3.19 C8### (bizhub C658/C558/C458)
3.19.1 C8101
3.19.2 C8103
3.19.3 C8106
3.19.4 C8107
3.19.5 C8302
3.19.6 C8401
3.19.7 C8402
3.20 C9###
3.20.1 C9401, C9402 (bizhub C658/C558/C458/C368/C308/C258)
3.20.2 C9403, C9404 (bizhub C368/C308/C258)
3.20.3 C9403, C9404 (bizhub C658/C558/C458)
3.21 CA###
3.21.1 CA051, CA052, CA053 (bizhub C658/C558/C458/C368/C308/C258)
3.22 CC###
3.22.1 CC140
3.22.2 CC151, CC152 (bizhub C658/C558/C458/C368/C308/C258)
3.22.3 CC155 (bizhub C658/C558/C458/C368/C308/C258)
3.22.4 CC156 (bizhub C658/C558/C458/C368/C308/C258)
3.22.5 CC159, CC15A (bizhub C658/C558/C458/C368/C308/C258)
3.22.6 CC15B (bizhub C658/C558/C458/C368/C308/C258)
3.22.7 CC15C (bizhub C658/C558/C458/C368/C308/C258)
3.22.8 CC163 (bizhub C658/C558/C458/C368/C308/C258)
3.22.9 CC164 (bizhub C658/C558/C458/C368/C308/C258)
3.22.10 CC170, CC171, CC172, CC173, CC174, CC180, CC181, CC182, CC183, CC184, CC185, CC186 (bizhub C658/
C558/C458/C368/C308/C258)
3.22.11 CC190 (bizhub C368/C308/C258)
3.22.12 CC190 (bizhub C658/C558/C458)
3.22.13 CC191 (bizhub C658/C558/C458/C368/C308/C258)
3.22.14 CC211 (bizhub C658/C558/C458/C368/C308/C258)
3.22.15 CC212 (bizhub C658/C558/C458/C368/C308/C258)
3.22.16 CC213 (bizhub C658/C558/C458/C368/C308/C258)
3.22.17 CC214 (bizhub C658/C558/C458/C368/C308/C258)
3.22.18 CC216 (bizhub C658/C558/C458/C368/C308/C258)
3.22.19 CC301 (bizhub C658/C558/C458/C368/C308/C258)
3.22.20 CC302 (bizhub C658/C558/C458/C368/C308/C258)
3.23 CD###
3.23.1 CD002 (bizhub C368/C308/C258)
3.23.2 CD002 (bizhub C658/C558/C458)
3.23.3 CD004, CD00F, CD020 (bizhub C368/C308/C258)
3.23.4 CD004, CD00F, CD020 (bizhub C658/C558/C458)
3.23.5 CD010
3.23.6 CD011 (bizhub C658/C558/C458/C368/C308/C258)
3.23.7 CD012 (bizhub C658/C558/C458/C368/C308/C258)
3.23.8 CD013, CD014 (bizhub C658/C558/C458/C368/C308/C258)
3.23.9 CD015 (bizhub C658/C558/C458/C368/C308/C258)
3.23.10 CD016 (bizhub C658/C558/C458/C368/C308/C258)
3.23.11 CD017 (bizhub C658/C558/C458/C368/C308/C258)
3.23.12 CD030 (bizhub C658/C558/C458/C368/C308/C258)
3.23.13 CD041, CD042, CD043, CD044, CD045, CD046 (bizhub C658/C558/C458/C368/C308/C258)
3.23.14 CD047, CD048, CD049, CD04A, CD04B (bizhub C658/C558/C458/C368/C308/C258)
3.23.15 CD050 (bizhub C368/C308/C258)
3.23.16 CD050 (bizhub C658/C558/C458)
3.23.17 CD110 (bizhub C658/C558/C458/C368/C308/C258)
3.23.18 CD201, CD202, CD203 (bizhub C658/C558/C458/C368/C308/C258)
3.23.19 CD211, CD212 (bizhub C658/C558/C458/C368/C308/C258)
3.23.20 CD241, CD242
3.23.21 CD252 (bizhub C658/C558/C458/C368/C308/C258)
3.23.22 CD261 (bizhub C658/C558/C458/C368/C308/C258)
3.23.23 CD262 (bizhub C658/C558/C458/C368/C308/C258)
3.23.24 CD271 (bizhub C368/C308/C258)
3.23.25 CD271 (bizhub C658/C558/C458)
3.23.26 CD272 (bizhub C368/C308/C258)
3.23.27 CD272 (bizhub C658/C558/C458)
3.23.28 CD3## (bizhub C658/C558/C458/C368/C308/C258)
3.23.29 CD313 (bizhub C658/C558/C458/C368/C308/C258)
3.23.30 CD38E (bizhub C658/C558/C458/C368/C308/C258)
3.23.31 CD390
3.23.32 CD391
3.23.33 CD392 (bizhub C658/C558/C458/C368/C308/C258)
3.23.34 CD3A0
3.23.35 CD3C0 (bizhub C658/C558/C458/C368/C308/C258)
3.23.36 CD401, CD402, CD403, CD404, CD405, CD406, CD407, CD411, CD412, CD413
3.23.37 CD601, CD602, CD603
3.23.38 CD701, CD702, CD703
3.23.39 CD704
3.23.40 CD705, CD706
3.23.41 CDC##
3.23.42 CDF50, CDF70, CDFA0 (bizhub C658/C558/C458/C368/C308/C258)
3.23.43 CDF51, CDF71, CDFA1 (bizhub C368/C308/C258)
3.23.44 CDF51, CDF71, CDFA1 (bizhub C658/C558/C458)
3.24 CE###
3.24.1 CE001, CE003, CE004, CE005, CE006, CE007, CE009 (bizhub C658/C558/C458/C368/C308/C258)
3.24.2 CE002 (bizhub C658/C558/C458/C368/C308/C258)
3.24.3 CE101 (bizhub C658/C558/C458/C368/C308/C258)
3.24.4 CE201 (bizhub C658/C558/C458/C368/C308/C258)
3.24.5 CE301, CE302, CE303, CE304, CE305 (bizhub C658/C558/C458/C368/C308/C258)
3.24.6 CED01 (bizhub C658/C558/C458/C368/C308/C258)
3.24.7 CEEE1, CEEE3 (bizhub C658/C558/C458/C368/C308/C258)
3.24.8 CEEE2 (bizhub C658/C558/C458/C368/C308/C258)
4. ABORT CODE
4.1 Troubleshooting of the abort code (bizhub C368/C308/C258)
4.1.1 Contents
4.1.2 Procedure
4.2 Troubleshooting of the abort code (bizhub C658/C558/C458)
4.2.1 Contents
4.2.2 Procedure
4.3 CF0##
4.4 CF1##
4.5 CF2##
4.6 CF3##
4.7 CF4##
4.8 CF5##
4.9 CF6##
4.10 CF7##
4.11 CFA## (bizhub C658/C558/C458/C368/C308/C258)
4.12 CFB## (bizhub C368/C308/C258)
4.12.1 CFB0#
4.12.2 CFB1#
4.12.3 CFB2#
4.12.4 CFB3#
4.12.5 CFB4#
4.12.6 CFB5#
4.12.7 CFB6#
4.12.8 CFB7#
4.12.9 CFB8#
4.12.10 CFB9#
4.12.11 CFBA#
4.12.12 CFBB#
4.12.13 CFBC#
4.12.14 CFBD#
4.12.15 CFBE#
4.12.16 CFBF#
4.13 CFB## (bizhub C658/C558/C458)
4.13.1 CFB0#
4.13.2 CFB1#
4.13.3 CFB2#
4.13.4 CFB3#
4.13.5 CFB6#
4.13.6 CFB7#
4.13.7 CFB8#
4.13.8 CFB9#
4.13.9 CFBA#
4.13.10 CFBB#
4.13.11 CFBC#
4.13.12 CFBD#
4.13.13 CFBE#
4.13.14 CFBF#
4.14 CFC## (bizhub C368/C308/C258)
4.14.1 CFC0#
4.14.2 CFC1#
4.14.3 CFC2#
4.14.4 CFC3#
4.14.5 CFC4#
4.14.6 CFC5#
4.14.7 CFC6#
4.14.8 CFC7#
4.14.9 CFC8#
4.14.10 CFC9#
4.14.11 CFCA#
4.14.12 CFCB#
4.14.13 CFCC#
4.14.14 CFCD#
4.14.15 CFCE#
4.14.16 CFCF#
4.15 CFC## (bizhub C658/C558/C458)
4.15.1 CFC0#
4.15.2 CFC1#
4.15.3 CFC2#
4.15.4 CFCA#
4.15.5 CFCB#
4.15.6 CFCC#
4.15.7 CFCD#
4.16 CFD## (bizhub C368/C308/C258)
4.16.1 CFD0#
4.16.2 CFD1#
4.16.3 CFD2#
4.16.4 CFD3#
4.16.5 CFD4#
4.16.6 CFD5#
4.16.7 CFD6#
4.16.8 CFD7#
4.16.9 CFD8#
4.16.10 CFD9#
4.16.11 CFDA#
4.16.12 CFDB#
4.16.13 CFDC#
4.16.14 CFDD#
4.16.15 CFDE#
4.16.16 CFDF#
4.17 CFD## (bizhub C658/C558/C458)
4.17.1 CFD0#
4.17.2 CFD1#
4.17.3 CFD2#
4.17.4 CFD3#
4.17.5 CFD4#
4.17.6 CFD5#
4.17.7 CFD6#
4.17.8 CFD7#
4.17.9 CFD8#
4.17.10 CFD9#
4.17.11 CFDA#
4.17.12 CFDD#
4.17.13 CFDE#
4.17.14 CFDF#
4.18 CFE## (bizhub C368/C308/C258)
4.18.1 CFE0#
4.18.2 CFE1#
4.18.3 CFE2#
4.18.4 CFE3#
4.18.5 CFE4#
4.18.6 CFE5#
4.18.7 CFE6#
4.18.8 CFE7#
4.18.9 CFE8#
4.18.10 CFE9#
4.18.11 CFEA#
4.18.12 CFEB#
4.18.13 CFEC#
4.18.14 CFED#
4.18.15 CFEE#
4.18.16 CFEF#
4.19 CFE## (bizhub C658/C558/C458)
4.19.1 CFE0#
4.19.2 CFE1#
4.19.3 CFE2#
4.19.4 CFE3#
4.19.5 CFE4#
4.19.6 CFE5#
4.19.7 CFE6#
4.19.8 CFE9#
4.19.9 CFEA#
4.19.10 CFEB#
4.19.11 CFEC#
4.19.12 CFED#
4.19.13 CFEE#
4.19.14 CFEF#
4.20 CFF## (bizhub C368/C308/C258)
4.20.1 CFF0#
4.20.2 CFF1#
4.20.3 CFF2#
4.20.4 CFF3#
4.20.5 CFF4#
4.20.6 CFF5#
4.20.7 CFF6#
4.20.8 CFF7#
4.20.9 CFF8#
4.20.10 CFF9#
4.20.11 CFFA#
4.20.12 CFFB#
4.20.13 CFFC#
4.20.14 CFFD#
4.20.15 CFFE#
4.21 CFF## (bizhub C658/C558/C458)
4.21.1 CFF0#
4.21.2 CFF1#
4.21.3 CFF2#
4.21.4 CFF5#
4.21.5 CFFC#
4.21.6 CFF7#
4.21.7 CFF8#
4.21.8 CFF9#
4.21.9 CFFA#
4.21.10 CFFB#
5. ERROR CODE FOR THE INTERNET ISW
5.1 Error code list for the Internet ISW
5.2 0x0#
5.3 0x1#
5.4 0x2#
6. CS Remote Care ERROR CODE
6.1 Troubleshooting for CS Remote Care
6.2 CS Remote Care Operation under Enhanced Security Mode
6.3 List of the CS Remote Care error code
6.3.1 When connecting by modem
6.3.2 When connecting by e-mails
6.3.3 When connecting by http
6.3.4 When connecting by Fax modem
7. FAX TROUBLE CODE
The error in the transmission/reception system
7.1 B0##
7.2 B11#
7.3 B12#
7.4 B13#
7.5 B14#
7.6 B15#
7.7 B16#
7.8 B17#
7.9 B18#
7.10 B19#
7.11 T0#
7.12 T1#
7.13 T2#
7.14 T3#
7.15 T4#
7.16 T5#
7.17 T6#
7.18 T7#
7.19 T8#
7.20 T9#
7.21 R0#
7.22 R1#
7.23 R2#
7.24 R3#
7.25 R4#
7.26 R5#
7.27 R6#
7.28 R7#
7.29 R8#
7.30 R9#
7.31 Other
8. DIAGNOSTIC CODES
8.1 Outline
8.2 Explanation
8.2.1 The diagnostic code
8.2.2 Information of communication results and conditions
9. NETWORK FAX ERROR CODE
9.1 Error code list of the transmission system
9.2 Error code list of the reception system
10. Open API RELATED TROUBLE
10.1 Outline
10.2 Types of Trouble
10.3 Solution
10.3.1 When using an application
10.3.2 After rewriting the firmware of the machine
11. TROUBLES THAT DO NOT DISPLAY THE TROUBLE CODE
11.1 Machine is not energized at all (DCPU operation check) (bizhub C658/C558/C458/C368/C308/C258)
11.1.1 Contents
11.1.2 Procedure
11.2 Fusing heaters do not operate (bizhub C658/C558/C458/C368/C308/C258)
11.2.1 Contents
xli
11.2.2 Procedure
11.3 Power is not supplied to DF (bizhub C658/C558/C458)
11.3.1 Procedure
11.4 Power is not supplied to option
11.4.1 DF-704/DF-629
11.4.2 PC-110/PC-115/PC-210/PC-215/PC-410/PC-415
11.4.3 FS-533/FS-534
11.4.4 FS-536/FS-536SD/FS-537/FS-537SD
12. OTHER TROUBLE
12.1 Firmware error warning
12.1.1 Action
12.2 HDD lock password error warning
12.2.1 Detection timing
12.2.2 Action
13. TROUBLESHOOTING OF i-Option
13.1 Structure of license management
13.2 License management information
13.3 Error message
13.3.1 License management error
14. IMAGE QUALITY PROBLEM
14.1 How to read element data
14.1.1 Table Number
14.1.2 Level History 1
14.1.3 Level History 2
14.2 Troubleshooting procedure overview
14.2.1 Test pattern printing
14.2.2 Self-diagnostic function
14.3 Corrective action procedure (bizhub C658/C558/C458/C368/C308/C258)
14.3.1 Image trouble sample illustrations
14.3.2 White line 1, White band 1, Color line 1, Color band 1
14.3.3 White line 2, White band 2, Color line 2, Color band 2
14.3.4 Uneven density 1
14.3.5 Uneven density 2
14.3.6 Faint image, low image density (ID lowering)
14.3.7 Gradation reproduction failure
14.3.8 Color reproducibility error
14.3.9 Incorrect color image registration
14.3.10 Foggy background
14.3.11 Void areas, White spots
14.3.12 Color spot
14.3.13 Blurred image
14.3.14 Back marking
14.3.15 Blank copy, Black copy
14.3.16 Uneven pitch
14.3.17 Uneven gloss, Rough gloss
14.3.18 Poor fusing performance, Offset
14.3.19 Brush effect, Image bleeding
14.3.20 Blurred fine lines
14.3.21 Moire
14.3.22 Skewed image
14.3.23 Distorted image
14.3.24 ACS malfunction
14.3.25 Abnormal image
15. IC PROTECTOR
15.1 Outline
15.2 IC protector list
15.2.1 bizhub C368/C308/C258
15.2.2 bizhub C658/C558/C458
15.2.3 Dual scan document feeder
15.2.4 JS-506
15.2.5 FS-534/FS-534SD
15.2.6 FS-533
15.2.7 PK-519
15.2.8 FS-536/FS-536SD
15.2.9 FS-537/FS-537SD
15.2.10 PK-523
15.2.11 PI-507
15.2.12 ZU-609

L) PARTS/CONNECTOR LAYOUT DRAWING
1. PARTS LAYOUT DRAWING
1.1 Bizhub C368/C308/C258
1.1.1 Scanner section
1.1.2 Front side
1.1.3 Back side
1.1.4 Left side
1.1.5 Right side
1.1.6 Manual bypass tray
1.1.7 Tray 1
1.1.8 Tray 2
1.1.9 Fusing/paper exit section
1.1.10 Duplex section
1.2 Bizhub C658/C558/C458
1.2.1 Scanner section
1.2.2 Front side section
1.2.3 Back side
1.2.4 Left side
1.2.5 Right side
1.2.6 Manual bypass tray
1.2.7 Tray 1
1.2.8 Tray 2
1.2.9 Fusing/paper exit section
1.2.10 Duplex section
1.3 Dual scan document feeder
1.4 DF-704/SP-501 (Option)
1.5 DF-629/SP-501 (Option)
1.6 PC-110/PC-210 (Option)
1.6.1 Board/switch/sensor/others
1.6.2 Load
1.7 PC-115/PC-215 (Option)
1.7.1 Board/switch/sensor/others
1.7.2 Load
1.8 PC-410 (Option)
1.8.1 Board/switch/sensor/others
1.8.2 Load
1.9 PC-415 (Option)
1.9.1 Board/switch/sensor/others
1.9.2 Load
1.10 LU-302 (Option)
1.11 LU-207 (Option)
1.12 JS-506 (Option)
1.13 FS-534 (Option)
1.14 PK-520 (Option)
1.15 SD-511 (Option)
1.16 FS-533 (Option)
1.17 PK-519 (Option)
1.18 FS-537/FS-537SD (Option)
1.19 FS-537SD saddle section
1.20 ZU-609 (Option)
1.21 PK-523 (Option)
1.22 JS-602 (Option)
1.23 PI-507 (Option)
1.24 FS-536/FS-536SD (Option)
1.25 FS-536SD saddle section
1.26 CU-101 (Option)
1.27 CU-102 (Option)
2. CONNECTOR LAYOUT DRAWING
2.1 BOARD CONNECTOR LAYOUT DRAWING (bizhub C358/C308/C258)
2.1.1 Bizhub C368/C308/C258
2.1.2 DF control board (DFCB)
2.1.3 Dual scan image processing board (DSIPB)
2.1.4 CIS power supply (CISPU)
2.1.5 PC control board (PCCB)
2.1.6 LU drive board (LUDB)
2.1.7 JS control board (JSCB)
2.1.8 FS control board (FSCB)
2.1.9 SD drive board (SDDB)
2.1.10 Stapler relay board (STREYB)
2.1.11 PK control board (PKCB)
2.1.12 Clean unit drive board (CUDB)
2.1.13 FAX board (FAXB)
2.2 BOARD CONNECTOR LAYOUT DRAWING (bizhub C658/C558/C458)
2.2.1 bizhub C658/C558/C458
2.2.2 Dual scan document feeder
2.2.3 PC control board (PCCB)
2.2.4 LU drive board (LUDB)
2.2.5 Punch control board (PKCB)
2.2.6 JS control board (JSCB)
2.2.7 ZU drive board (ZUDB)
2.2.8 ZU relay board (ZURB)
2.2.9 FS control board (FSCB)
2.2.10 SD control board (SDCB)
2.2.11 Stapler relay board (STREYB)
2.2.12 PI drive board (PIDB)
2.2.13 PI relay board (PIRB)
2.2.14 Clean unit drive board (CUDB)
2.3 RELAY CONNECTOR LAYOUT DRAWING
2.3.1 bizhub C368/C308/C258
2.3.2 bizhub C658/C558
2.3.3 bizhub C458

M) TIMING CHART
1. bizhub C368/C308/C258
1.1 Timing chart when the main power switch is turned ON
2. bizhub C658/C558/C458
2.1 Timing chart when the main power switch is turned ON
3. FS-534/SD-511
3.1 Shift mode
3.1.1 Operating conditions
3.1.2 Timing chart
3.2 Center staples mode
3.2.1 Operating conditions
3.2.2 Timing chart
4. Dual Scan Document Feeder (bizhub C658/C558/C458)
4.1 Operating conditions
4.2 Timing chart
5. LU-207/LU-302 (bizhub C658/C558/C458/C368/C308/C258)
5.1 Operating conditions
5.2 Timing chart
6. FS-536/FS-536SD (bizhub C658/C558/C458)
6.1 Shift mode
6.1.1 Operating conditions
6.1.2 Timing chart
6.2 Center staples mode
6.2.1 Operating conditions
6.2.2 Timing chart

N) WIRING DIAGRAM
1. Bizhub C368/C308/C258
1.1 Main body
2. bizhub C658/C558/C458
2.1 Main body
3. Dual scan document feeder
4. Option
4.1 DF-629
4.1.1 DF-629
4.2 DF-704
4.2.1 DF-704
4.3 PC-110
4.3.1 PC-110
4.4 PC-115
4.4.1 PC-115
4.5 PC-210
4.5.1 PC-210
4.6 PC-215
4.6.1 PC-215
4.7 PC-410
4.7.1 PC-410
4.8 PC-415
4.8.1 PC-415
4.9 LU-207
4.10 LU-302
4.10.1 LU-302
4.11 FS-533
4.11.1 FS-533
4.12 FS-534
4.13 FS-534SD
4.14 JS-506
4.14.1 JS-506
4.15 FS-536/FS-536SD
4.16 FS-537/FS-537SD
4.17 PK-523
4.18 ZU-609
4.19 PI-507

O) THEORY OF OPERATION Bizhub C658/C558/C458/C368/C308/C258
1. INTERFACE SECTION
1.1 Configuration (bizhub C368/C308/C258)
1.1.1 Front side
1.1.2 Right side
1.1.3 Rear side
1.2 Configuration (bizhub C658/C558/C458)
1.2.1 Front side
1.2.2 Right side
1.2.3 Rear side
2. SCANNER SECTION
2.1 Configuration
2.2 Drive
2.3 Operation
2.3.1 LED exposure unit
2.3.2 When the power is ON
2.3.3 Control when the Start key is pressed
2.3.4 Original scanning area
2.3.5 Original size detection control
2.3.6 Image processing
3. WRITE SECTION (PH SECTION)
3.1 Configuration (bizhub C368/C308/C258)
3.2 Configuration (bizhub C658/C558/C458)
3.3 Operation
3.3.1 Overview
3.3.2 Laser exposure process
3.3.3 Laser emission timing
3.3.4 Laser emission stop
3.3.5 Laser emission area
3.3.6 Color registration control (color shift correction) system
3.3.7 Color skew correction control
3.3.8 Skew adjustment/skew adjustment reset
3.3.9 PH unit temperature detection control
3.3.10 PH window cleaning
3.3.11 Image processing
4. PHOTO CONDUCTOR SECTION
4.1 Configuration
4.2 Drive
4.3 Operation
4.3.1 Photo conductor drive mechanism
4.3.2 Erase LED control
4.3.3 Photo conductor cleaning
4.3.4 Electrostatic charger control
4.3.5 Charging roller cleaning
4.3.6 Drum unit detection
5. DEVELOPING SECTION
5.1 Configuration
5.2 Drive
5.2.1 Developing section/K drive mechanism
5.2.2 Developing section/Y, M, C drive mechanism
5.3 Operation
5.3.1 Developing unit pressure/releases mechanism
5.3.2 Developer flow
5.3.3 Auto refining developing system
5.3.4 Developing bias
5.3.5 Toner scattering prevention
5.3.6 Developing cooling
5.3.7 Toner density control
5.3.8 Developing unit detection
6. TONER SUPPLY SECTION
6.1 Configuration (bizhub C368/C308/C258)
6.2 Configuration (bizhub C658/C558/C458)
6.3 Drive
6.3.1 Toner cartridge drive (bizhub C368/C308/C258)
6.3.2 Toner cartridge drive (bizhub C658/C558/C458)
6.3.3 Toner hopper drive
6.4 Operation
6.4.1 Toner replenishing overview
6.4.2 Toner replenishing from toner bottle to toner hopper
6.4.3 Toner replenishing from toner hopper to developing unit
6.4.4 Auxiliary toner replenishing control for toner hopper
6.4.5 Auxiliary toner replenishing control for developing unit
6.4.6 Toner spillage prevention shutter
6.4.7 Toner supply PPM control
6.4.8 Front door mechanism
6.4.9 Toner empty detection control
6.4.10 Toner cartridge detection
7. 1ST TRANSFER SECTION
7.1 Configuration
7.2 Drive
7.3 Operation
7.3.1 Transfer belt drive
7.3.2 1st transfer roller control
7.3.3 Pressure/retraction control by print mode
7.3.4 1st transfer control
7.3.5 Transfer belt cleaning
7.3.6 Waste toner spillage prevention shutter
7.3.7 Cleaning blade foreign matter removal control
7.3.8 Transfer belt new article detection
8. 2ND TRANSFER SECTION
8.1 Configuration
8.2 Drive
8.3 Operation
8.3.1 2nd transfer control
8.3.2 Control of toner application to 2nd transfer roller
8.3.3 2nd transfer roller cleaning
8.3.4 Charge neutralization and separation of paper
8.3.5 Paper winding prevention guide
8.3.6 IDC sensor protection
8.3.7 2nd transfer roller new article detection
9. TONER COLLECTING SECTION
9.1 Configuration
9.2 Drive
9.3 Operation
9.3.1 Waste toner box drive mechanism
9.3.2 Control of waste toner conveyance through waste toner box
9.3.3 Waste toner box-in-position detection
9.3.4 Waste toner box full detection
9.3.5 Waste toner box new article detection
9.3.6 Waste toner spillage prevention shutter
10. PAPER FEED SECTION (MANUAL BYPASS TRAY)
10.1 Configuration
10.2 Drive (bizhub C368/C308/C258)
10.3 Drive (bizhub C658/C558/C458)
10.4 Operation
10.4.1 Up/down control
10.4.2 Paper feed control
10.4.3 Paper size detection control
10.4.4 Paper empty detection control
10.4.5 Paper separation pressure switching mechanism
11. PAPER FEED SECTION
11.1 Configuration
11.1.1 Tray 1 (bizhub C368/C308/C258)
11.1.2 Tray 1 (bizhub C658/C558/C458)
11.1.3 Tray 2 (bizhub C368/C308/C258)
11.1.4 Tray 2 (bizhub C658/C558/C458)
11.2 Drive
11.2.1 Drive (bizhub C368/C308/C258)
11.2.2 Drive (bizhub C658/C558/C458)
11.3 Operation
11.3.1 Up/down control
11.3.2 Paper feed control (bizhub C368/C308/C258)
11.3.3 Paper feed control (bizhub C658/C558/C458)
11.3.4 Paper feed retry control
11.3.5 Feed roller speed reduction control
11.3.6 Vertical transport roller speed reduction control
11.3.7 Paper transport control (bizhub C368/C308/C258)
11.3.8 Paper transport control (bizhub C658/C558/C458)
11.3.9 Downstream exit control during multi-print cycle
11.3.10 Paper pick-up pressure switching mechanism
11.3.11 Paper size detection control
11.3.12 Paper length guide operation mechanism (bizhub C658/C558/C458)
11.3.13 Paper width guide (bizhub C658/C558/C458)
11.3.14 Remaining paper detection control
11.3.15 Paper feed tray locking mechanism
11.3.16 Roller retract mechanism
11.3.17 Paper feed tray stopper release mechanism
12. REGISTRATION SECTION
12.1 Configuration
12.1.1 Configuration (bizhub C368/C308/C258)
12.1.2 Configuration (bizhub C658/C558/C458)
12.1.3 Configuration (bizhub C658)
12.2 Operation
12.2.1 Registration control
12.2.2 Right door mechanism
13. FUSING SECTION (bizhub C458/C368/C308/C258)
13.1 Configuration
13.2 Drive
13.2.1 Fusing section roller drive
13.2.2 Pressure roller pressure drive
13.3 Operation
13.3.1 Fusing drive release mechanism
13.3.2 Fusing speed correction
13.3.3 Fusing pressure/retraction control
13.3.4 Paper separation mechanism
13.3.5 Fusing temperature control
13.3.6 Plain paper fusing temperature control
13.3.7 Smart fusing control
13.3.8 Protection from abnormal temperatures
13.3.9 Fusing PPM control
13.3.10 Fusing unit new article detection
14. FUSING SECTION (bizhub C658/C558)
14.1 Configuration
14.2 Drive
14.2.1 Fusing section roller drive
14.2.2 Fusing pressure roller pressure drive
14.3 Operation
14.3.1 Heating roller assy heating control
14.3.2 Fusing drive release mechanism
14.3.3 Fusing speed correction
14.3.4 Fusing pressure/retraction control
14.3.5 Soaking roller pressurization/release control
14.3.6 Fusing paper transport control
14.3.7 Paper separation mechanism
14.3.8 Fusing temperature control
14.3.9 Protection from abnormal temperatures
14.3.10 IH power supply control
14.3.11 Temperature sensor control
14.3.12 Fusing PPM control
14.3.13 Fusing unit new article detection
15. PAPER EXIT/REVERSE SECTION
15.1 Configuration (bizhub C368/C308/C258)
15.2 Configuration (bizhub C658/C558/C458)
15.3 Drive (bizhub C368/C308/C258)
15.4 Drive (bizhub C658/C558/C458)
15.5 Operation
15.5.1 Transport control
15.5.2 Paper exit roller speed reduction control (C658/C558/C458)
16. DUPLEX SECTION
16.1 Configuration (bizhub C368/C308/C258)
16.2 Configuration (bizhub C658/C558/C458)
16.3 Drive (bizhub C368/C308/C258)
16.4 Drive (bizhub C658/C558/C458)
16.5 Operation
16.5.1 Paper transport control
16.5.2 Duplex circulation control
17. IMAGE STABILIZATION CONTROL
17.1 Overview
17.2 Description of control
17.2.1 IDC sensor adjustment control
17.2.2 Max. density adjustment control
17.2.3 LD intensity adjustment control
17.2.4 Color registration control (color shift correction)
17.2.5 Gamma correction control
17.3 Control contents (bizhub C368/C308/C258)
17.3.1 Image stabilization type (mode)
17.3.2 Control sequence by mode
17.4 Control contents (bizhub C658/C558/C458)
17.4.1 Image stabilization type (mode)
17.4.2 Control sequence by mode
17.5 Operation timing
17.5.1 Predrive operation
17.5.2 During a print cycle (bizhub C368/C308/C258)
17.5.3 During a print cycle (bizhub C658/C558/C458)
17.5.4 Service Mode
17.5.5 Expert Adjustment
17.5.6 Stabilization time (bizhub C368/C308/C258)
17.5.7 Stabilization time (bizhub C658/C558/C458)
18. IMAGE PROCESSING
18.1 Scanner section image processing block diagram
18.1.1 Processing flow
18.1.2 Detail
18.2 Write section image processing block diagram
18.2.1 Processing flow
18.2.2 Detail
19. POWER SUPPLY SECTION
19.1 Main power switch
19.2 Power key
19.2.1 Configuration
19.2.2 Operation
20. FAN CONTROL
20.1 Configuration
20.1.1 bizhub C368/C308/C258
20.1.2 bizhub C658/C558
20.1.3 bizhub C458
20.2 Control
20.3 Operation
20.3.1 Power supply cooling fan
20.3.2 Transfer belt cleaner cooling fan
20.3.3 Rear side cooling fan
20.3.4 Toner cartridge cooling fan
20.3.5 IH coil cooling fan (bizhub C658/C558)
20.3.6 Paper cooling fan
20.3.7 Toner suction fan
20.3.8 Fusing power supply cooling fan
20.3.9 UFP exhaust fan1, UFP exhaust fan2
21. COUNTER CONTROL
21.1 Configuration
21.2 Operation
22. HEATER
22.1 Configuration (HT-509/MK-735)
22.2 Configuration (LU/TK101)
22.3 Control
22.3.1 HT-509/MK-735
22.3.2 LU/TK-101
23. INDICATOR FUNCTION
23.1 Configuration
23.1.1 Control panel section
23.1.2 Front side section
23.2 Control
23.2.1 Power key and Start key indicator section
23.2.2 Warning status indicator section
23.2.3 Operation status indicator section
23.2.4 Data indicator section
23.2.5 Remaining paper level display section

PA THEORY OF OPERATION DUAL SCAN DOCUMENT FEEDER/SP-501/UK-501 (bizhub C658/
C558/C458)
1. CONFIGURATION
1.1 Section configuration
2. PAPER PATH
2.1 Paper path
3. PAPER FEED SECTION
3.1 Configuration
3.2 Drive
3.3 Operation
3.3.1 Original set/empty detection
3.3.2 Original size detection mechanism
3.3.3 Up/down control for the document feed tray
3.3.4 Original take-up control
3.3.5 Double feed detection (UK-501)
4. REGISTRATION SECTION
4.1 Configuration
4.2 Drive
4.3 Operation
4.3.1 Registration control
5. READ SECTION
5.1 Configuration
5.2 Drive
5.3 Operation
5.3.1 Reading transport control
5.3.2 Reading roller pressure/retraction control
5.3.3 DF original glass contamination prevention control
5.3.4 CIS original reading control
5.3.5 CIS control when power is turned ON
5.3.6 CIS control when the document is loaded
5.3.7 CIS control when the start key is pressed
5.3.8 CIS glass contamination prevention control
5.3.9 Opening and closing guide set detection
6. PAPER EXIT SECTION
6.1 Configuration
6.2 Drive
6.3 Operation
6.3.1 Document exit mechanism
6.3.2 Faxed original stamp function SP-501
7. OPEN AND CLOSE DETECTION SECTION
7.1 DF angle open and close detection
7.2 DF open and close detection
8. FAN CONTROL
8.1 Function
8.2 Control condition

PB THEORY OF OPERATION DF-629
1. CONFIGURATION
1.1 Section configuration
1.2 Paper path
1.2.1 1-sided paper path
1.2.2 2-sided paper path
1.3 Main part configuration
1.3.1 Main electrical part
1.3.2 Sensor
1.3.3 Roller placement
2. DRIVE
2.1 Paper feed drive
2.2 Registration drive
2.3 Document reading drive
2.4 Document reading glass cleaning drive
3. OPERATION
3.1 Document feed section
3.1.1 Document set/empty detection
3.1.2 Document size detection mechanism
3.1.3 Pick-up roller up/down control
3.1.4 Document feed/separation control
3.1.5 Document separation roller pressure switching mechanism
3.2 Document registration section
3.2.1 Document registration outline
3.2.2 Document registration loop formation process
3.3 Document reading section
3.3.1 Transport mechanism
3.3.2 Document reading glass cleaning mechanism
3.3.3 Document reading roll pressure/release control
3.3.4 Document reading front guide
3.4 Document switchback/exit section
3.4.1 Document switchback/exit mechanism
3.4.2 Switching mechanism for document switchback/exit
3.4.3 Switchback exit roll pressure/retraction control
3.4.4 Faxed document stamp function
3.5 Paper path operation
3.5.1 1-sided mode
3.5.2 2-sided mode
3.6 DF open/close detection mechanism
3.6.1 Document exchange detection control
3.6.2 DF open/close detection
3.7 Cooling inside the unit mechanism
3.8 DF Skew(Front) adjustment mechanism
3.8.1 Hinge on the right side of the machine (front)
3.8.2 Hinge on the right side of the machine (rear)
3.8.3 Adjustment direction conceptual drawing

PC THEORY OF OPERATION DF-704
1. CONFIGURATION
1.1 Section configuration
1.2 Paper path
1.3 Main part configuration
1.3.1 Main electrical part
1.3.2 Sensor
1.3.3 Roller placement
2. DRIVE
2.1 Paper feed drive
2.2 Registration drive
2.3 Document reading drive
2.4 Document reading glass / CIS glass cleaning drive
3. OPERATION
3.1 Document feed section
3.1.1 Document set/empty detection
3.1.2 Document size detection mechanism
3.1.3 Pick-up roller up/down control
3.1.4 Document feed/separation control
3.1.5 Document separation roller pressure switching mechanism
3.2 Document registration section
3.2.1 Document registration outline
3.2.2 Document registration loop formation process
3.3 1-sided document reading section
3.3.1 Document reading section
3.3.2 Document reading roll pressure/release control
3.3.3 Document reading front guide
3.3.4 Document reading glass cleaning mechanism
3.4 2-sided document reading section
3.4.1 CIS original reading mechanism
3.4.2 CIS control when power is turned ON
3.4.3 CIS control when the document is loaded
3.4.4 CIS control when the start key is pressed
3.4.5 CIS glass contamination prevention control
3.4.6 CIS cover
3.5 Document exit section
3.5.1 Document exit mechanism
3.5.2 Faxed document stamp function
3.6 Paper path operation
3.7 DF open/close detection mechanism
3.7.1 Document exchange detection control
3.7.2 DF open/close detection
3.8 Cooling inside the unit mechanism
3.9 DF skew adjustment mechanism
3.9.1 DF Skew(Front) adjustment mechanism
3.9.2 DF Skew(Back) adjustment mechanism

PD THEORY OF OPERATION PC-110/PC-210/PC-115/PC-215
1. CONFIGURATION
2. PAPER PATH
3. DRIVE
4. OPERATION
4.1 Paper feed section
4.1.1 Paper feed drive mechanism
4.1.2 Roller retract mechanism
4.1.3 Paper lifting motion
4.2 Paper feed tray section
4.2.1 Paper size detection
4.2.2 Paper feed tray locking mechanism
4.2.3 Paper feed tray stopper release mechanism (PC-115/PC-215)
4.2.4 Remaining paper display mechanism

PE THEORY OF OPERATION PC-410/PC-415
1. CONFIGURATION
2. PAPER PATH
3. DRIVE
4. OPERATION
4.1 Paper feed section
4.1.1 Paper feed drive mechanism
4.1.2 Roller retract mechanism
4.2 Main tray section
4.2.1 Main tray up / down mechanism
4.2.2 Main tray lower limit detection
4.3 Sub tray section
4.3.1 Shifter drive mechanism
4.3.2 Sub tray paper remaining amount
4.4 Remaining paper amount displayed mechanism
4.4.1 Display state

PF THEORY OF OPERATION LU-207
1. SECTION CONFIGURATION
2. PAPER PATH
3. CONFIGURATION
3.1 Appearance
3.2 Main part
3.3 Electrical part
4. DRIVE
4.1 Paper feed transport drive
4.2 Paper lift-up drive
5. OPERATION
5.1 Unit open/close section
5.1.1 Unit lock mechanism
5.1.2 LU door open/close detection mechanism
5.2 Paper storage section
5.2.1 Paper tray lifting mechanism
5.2.2 Paper tray lift-up drive release mechanism
5.2.3 Paper guide plate
5.3 Paper feed/transport section
5.3.1 Paper feed control
5.3.2 Paper feed control
5.3.3 Periodical replacement parts
5.3.4 Remaining paper level detection
5.3.5 Paper empty detection
5.3.6 Remaining paper display

PG THEORY OF OPERATION LU-302
1. CONFIGURATION
1.1 Section configuration
1.2 Paper path
1.3 Main part configuration
1.3.1 Appearance
1.3.2 Main part
1.3.3 Electrical part
2. DRIVE
2.1 Paper feed transport drive
2.2 Paper lift-up drive
3. OPERATION
3.1 Unit open/close section
3.1.1 Unit lock mechanism
3.1.2 LU door open/close detection mechanism
3.2 Paper storage section
3.2.1 Paper tray lifting mechanism
3.2.2 Paper tray lift-up drive release mechanism
3.2.3 Paper size detection
3.3 Paper feed/transport section
3.3.1 Paper feed and transport control
3.3.2 Remaining paper level detection
3.3.3 Paper empty detection
3.3.4 Remaining paper display

PH THEORY OF OPERATION JS-506
1. OVERVIEW OF THE SEPARATOR
2. PAPER PATH
2.1 Paper feed to the exit tray
3. CONFIGURATION
3.1 Section configuration
3.2 Main electrical part configuration
4. DRIVE
4.1 Paper transport drive mechanism for exit tray 1
4.2 Paper transport drive mechanism for exit tray 2
4.3 Exit tray 2 shift mechanism
5. OPERATION
5.1 Exit tray 1
5.1.1 Paper transport
5.1.2 Paper full detection
5.2 Exit tray 2
5.2.1 Paper transport
5.2.2 Paper shift mechanism
5.2.3 Paper full detection

PI THEORY OF OPERATION FS-533/PK-519
1. FINISHER OUTLINE
2. PAPER PATH
2.1 Sort offset mode/Group offset mode/Staple mode/Punch mode
2.2 Non sort mode/Non group mode/Non staple mode/Sort mode/Group mode/Punch mode
3. CONFIGURATION
3.1 Section configuration
3.1.1 Exterior view
3.1.2 Section configuration
3.2 Electrical part configuration
3.3 Main mechanical part configuration
3.4 Main roller configuration
4. UNIT OPEN/CLOSE SECTION
4.1 Unit lock mechanism
4.1.1 Finisher unit lock mechanism
4.1.2 Punch unit lock mechanism (PK-519)
5. PUNCH SECTION (PK-519)
5.1 Configuration
5.1.1 Punch kit type
5.2 Drive
5.3 Operation
5.3.1 Skew correction mechanism
5.3.2 Punch control
5.3.3 Punch holes switch control
5.3.4 Punch dust full detection control
6. TRANSPORT SECTION
6.1 Configuration
6.2 Drive
6.2.1 Drive outline
6.2.2 Paper conveyance/receiving roller section drive
6.2.3 Paper exit roller section drive
6.3 Operation
6.3.1 Paper conveyance/receiving roller section paper transport control
6.3.2 Paper exit roller section paper transport control
6.3.3 Paper exit roller up/down control
6.3.4 Paper exit roller/lower drive connecting control
7. ALIGNMENT SECTION
7.1 Configuration
7.2 Drive
7.2.1 Drive outline
7.2.2 Alignment roller section
7.2.3 Alignment tray section
7.3 Operation
7.3.1 Paper alignment overview
7.3.2 Paper alignment control (paper FD alignment)
7.3.3 Paper alignment control (paper CD alignment)
7.3.4 Alignment tray paper detect control
8. STAPLER SECTION
8.1 Configuration/Drive
8.1.1 Stapler drive section top view
8.2 Operation
8.2.1 Stapler positioning control
8.2.2 Stapling control
8.2.3 Staple empty detection control
8.2.4 Clogged staple detection control
9. RECEIVING SECTION
9.1 Configuration
9.2 Drive
9.2.1 Drive outline
9.2.2 Tray lift up section
9.2.3 Paper level detect section
9.2.4 Paper exit roller section
9.3 Operation
9.3.1 Paper exit paddle control
9.3.2 Paper exit tray lift up control
9.3.3 Paper level detect control

PJ THEORY OF OPERATION FS-534/FS-534SD/RU-513/PK-520
1. FINISHER OUTLINE
2. PAPER PATH
2.1 Sub tray
2.2 Main tray
2.3 Saddle tray
2.4 3rd tray
3. CONFIGURATION
3.1 Section configuration
3.1.1 Exterior view
3.1.2 Section configuration
3.2 Main electrical part configuration
3.2.1 Control board, motor
3.2.2 Sensor
3.3 Main mechanical part configuration
3.3.1 Overall configuration
3.3.2 RU section (horizontal transport section)
3.3.3 Paper feed/transport section, Alignment section, Tray section
3.3.4 Punch section, Staple section, Exit section
3.3.5 Saddle section
3.4 Main roller configuration
4. FNS SECTION
4.1 Door open/close detection mechanism
4.1.1 Front door open/close detection mechanism
4.1.2 Upper door open/close detection mechanism
5. RU SECTION (RU-513)
5.1 Configuration
5.2 Drive
5.3 Operation
5.3.1 Paper transport control
5.3.2 RU section door open/close detection mechanism
5.3.3 3rd exit tray full detection mechanism
6. PUNCH SECTION (PK-520)
6.1 Configuration
6.1.1 Punch kit type
6.2 Drive
6.3 Operation
6.3.1 Skew correction mechanism
6.3.2 Puncher up/down status detection configuration
6.3.3 Punch operation noise suppression
6.3.4 Punch dust box full detection mechanism
7. TRANSPORT SECTION
7.1 Configuration
7.1.1 Paper path
7.1.2 Paper feed section – sub tray section
7.1.3 Paper feed section – main tray section
7.1.4 Main tray section – saddle section
7.2 Drive
7.2.1 FNS entry transport motor
7.2.2 FNS discharge motor
7.2.3 Receiving roller retraction motor
7.3 Operation
7.3.1 Paper path switching mechanism
7.3.2 Sub tray exit mechanism
7.3.3 Receiving roller section up/down function
7.3.4 Buffer control
8. ALIGNMENT SECTION
8.1 Configuration
8.1.1 Upper paddle section
8.1.2 Exit section
8.1.3 Stopper section (FD alignment section)
8.1.4 Alignment tray section (CD alignment section)
8.2 Drive
8.2.1 Drive outline
8.2.2 Upper paddle section
8.2.3 Exit section
8.2.4 Stopper section
8.2.5 Alignment tray section
8.3 Operation
8.3.1 Paper transport control in alignment section
9. STAPLER SECTION
9.1 Configuration/Drive
9.1.1 Configuration
9.1.2 Drive
9.2 Operation
9.2.1 Stapler positioning control
9.2.2 Stapling control
9.2.3 Staple empty detection control
9.2.4 Clogged staple detection control
10. RECEIVING SECTION
10.1 Configuration
10.1.1 Configuration outline
10.1.2 Main tray
10.1.3 Sub tray
10.1.4 3rd tray
10.1.5 Saddle tray (FS-534SD only)
10.2 Drive
10.2.1 Main tray section
10.2.2 Sub tray section
10.2.3 3re tray section
10.2.4 Saddle tray section
10.3 Operation
10.3.1 Sub tray exit mechanism
10.3.2 Main tray paper level detection control
10.3.3 Main tray upper detection mechanism
10.3.4 Tray full detection mechanism
11. SADDLE SECTION (FS-534SD ONLY)
11.1 Configuration
11.2 Transport section
11.2.1 Drive
11.2.2 Paper transport
11.2.3 Curl cover
11.3 Alignment section
11.3.1 Drive
11.3.2 Alignment
11.3.3 Stopper guide
11.4 Stapler
11.4.1 Drive
11.4.2 Operation
11.5 Folding/Saddle stitching
11.5.1 Drive
11.5.2 Folding knife
11.6 Tri-folding
11.6.1 Drive
11.6.2 Tri-folding operation
11.7 Exit section
11.7.1 Drive
11.7.2 Paper exit

PK THEORY OF OPERATION FS-536/FS-536SD/PK-520/RU-513
1. CONFIGURATION
1.1 Section configuration
2. PAPER PATH
2.1 Paper path (FS-536SD/PK-520/RU-513)
3. RU-513
3.1 Configuration
3.2 Drive
3.3 Operation
3.3.1 Paper transport control
3.3.2 RU section door open/close detection mechanism
3.3.3 3rd exit tray full detection mechanism
4. FINISHER SECTION
4.1 Door open/close detection mechanism
4.1.1 Front door open/close detection mechanism
4.1.2 Upper door open/close detection mechanism
5. TRANSPORT SECTION
5.1 Configuration
5.2 Drive
5.3 Operation
5.3.1 Paper path switching mechanism
5.3.2 Receiving roller section up/down function
5.3.3 Buffer control
5.3.4 Sub tray exit mechanism
6. ALIGNMENT SECTION
6.1 Configuration
6.1.1 Upper paddle section
6.1.2 Alignment tray section
6.1.3 Exit section
6.2 Drive
6.2.1 Upper paddle section/Alignment tray section
lv
6.2.2 Exit section
6.3 Operation
6.3.1 Paper transport control to alignment section
6.3.2 Paper alignment control
6.3.3 Paper exit control
7. STAPLER SECTION
7.1 Configuration
7.2 Drive
7.3 Operation
7.3.1 Stapler movement control
7.3.2 Staple control
7.3.3 Staple empty detection control
8. OUTPUT TRAY SECTION
8.1 Configuration
8.2 Drive
8.3 Operation
8.3.1 Main tray up/down mechanism
8.3.2 Main tray upper detection mechanism
8.3.3 Main tray paper level detection control
8.3.4 Tray full detection mechanism
9. SADDLE SECTION (FS-536SD)
9.1 Configuration
9.2 Transport section
9.2.1 Drive
9.2.2 Paper transport
9.2.3 Curl cover
9.3 Alignment section
9.3.1 Drive
9.3.2 Alignment
9.3.3 Stopper guide
9.4 Stapler
9.4.1 Drive
9.4.2 Operation
9.5 Center folding/Center staple
9.5.1 Drive
9.5.2 Folding knife
9.6 Tri-folding
9.6.1 Drive
9.6.2 Tri-folding operation
9.7 Paper exit section
9.7.1 Drive
9.7.2 Paper exit
9.7.3 Tray full detection mechanism
10. PK-520
10.1 Configuration
10.2 Drive
10.3 Operation
10.3.1 Skew correction control
10.3.2 Punch control
10.3.3 Puncher up/down status detection configuration
10.3.4 Punch dust box full detection mechanism
10.3.5 Punch dust box installation detection mechanism

PL THEORY OF OPERATION FS-537/FS-537SD/RU-513/PK-523/JS-602/PI-507/ZU-609
1. SECTION CONFIGURATION
2. PAPER PATH
2.1 Paper path (FS-537SD/PK-523/ZU-609/PI-507)
2.2 Paper path (FS-537/JS-602)
3. RU-513
3.1 Configuration
3.2 Drive
3.3 Operation
3.3.1 Paper transport control
3.3.2 RU section door open/close detection mechanism
3.3.3 3rd exit tray full detection mechanism
4. FINISHER SECTION
4.1 Door open/close detection mechanism
4.1.1 Front door open/close detection mechanism
lvi
5. TRANSPORT SECTION
5.1 Configuration
5.2 Drive
5.3 Operation
5.3.1 Route change gate
5.3.2 Sub tray/JS route change gate
5.3.3 Receiving roller section up/down function
5.3.4 Buffer control
5.3.5 Sub tray output
6. ALIGNMENT SECTION
6.1 Configuration
6.1.1 Upper paddle section
6.1.2 Alignment plate
6.1.3 Exit section
6.2 Drive
6.2.1 Upper paddle
6.2.2 Alignment plate
6.2.3 Exit section
6.3 Operation
6.3.1 Upper paddle
6.3.2 Alignment plate
6.3.3 Exit section
6.3.4 Stack support plate control
7. STAPLER SECTION
7.1 Configuration
7.2 Drive
7.3 Operation
7.3.1 Stapler position detection
7.3.2 Staple control
8. OUTPUT TRAY SECTION
8.1 Configuration
8.2 Drive
8.3 Operation
8.3.1 Main tray up/down mechanism
8.3.2 Main tray paper detection
8.3.3 Tray full detection mechanism
9. SADDLE SECTION FS-537SD
9.1 Configuration
9.2 Transport section
9.2.1 Drive
9.2.2 Paper transport
9.2.3 Curl cover
9.3 Alignment section
9.3.1 Drive
9.3.2 Alignment
9.3.3 Stopper guide
9.4 Stapler
9.4.1 Drive
9.4.2 Operation
9.5 Center folding/Center staple
9.5.1 Drive
9.5.2 Folding knife
9.6 Tri-folding
9.6.1 Drive
9.6.2 Tri-folding operation
9.7 Paper exit section
9.7.1 Drive
9.7.2 Paper exit
9.7.3 Paper transport belt
10. PK-523
10.1 Configuration
10.2 Drive
10.2.1 Punch shift section
10.2.2 Punch section
10.3 Operation
10.3.1 Punch standby position movement control
10.3.2 Punch position correction control
10.3.3 Punch control
10.3.4 Punch scraps box control
11. ZU-609
11.1 Configuration
11.2 Drive
11.2.1 1st folding
11.2.2 2nd folding/transport
11.3 Operation
11.3.1 1st folding mechanism
11.3.2 2nd folding mechanism
11.3.3 Double-folding mechanism
11.3.4 Transport roller pressure change
11.3.5 Z-fold pressure release mechanism
11.3.6 Z-fold paper detection
12. PI-507
12.1 Configuration
12.2 Drive
12.3 Operation
12.3.1 Tray lift mechanism
12.3.2 Pick-up mechanism
12.3.3 Separation mechanism
12.3.4 Path switching mechanism
12.3.5 Paper size detection control
12.3.6 Door open/close detection mechanism
13. JS-602
13.1 Configuration
13.2 Drive
13.3 Operation
13.3.1 Job tray transport mechanism
13.3.2 Door open/close detection mechanism

PM THEORY OF OPERATION AU-102/AU-201S
1. AU-102
1.1 Configuration
1.2 Operation
2. AU-201S
2.1 Configuration
2.2 Operation
2.3 Specifications

PN THEORY OF OPERATION EK-608/EK-609/SC-508
1. EK-608
1.1 Configuration
1.2 Operation
2. EK-609
2.1 Configuration
2.2 Operation
3. SC-508
3.1 Configuration
3.2 Operation

PO THEORY OF OPERATION UK-212
1. CONFIGURATION
1.1 Mounting position
2. OPERATION
2.1 Outline
2.2 2nd network interface structure
2.2.1 Wired Only
2.2.2 Wireless Only
2.2.3 Wired+Wireless (Secondary Mode)
2.2.4 Wired+Wireless (Primary Mode)
2.2.5 Wired+Wireless (Wi-Fi Direct)
2.3 Operation on ErP Auto Power Off mode
2.3.1 Wired + Wireless (Secondary Mode)
2.3.2 Wired + Wireless (Primary Mode), Wired + Wireless (Wi-Fi Direct)
2.3.3 Setting for printer driver

PP THEORY OF OPERATION FK-514/FK-515/MK-742
1. COMMUNICATION CONTROL
1.1 FIF bits of DIS, DTC and DCS
1.1.1 FIF data configuration list (DIS/DTC)
1.1.2 FIF data configuration list (DCS)
1.2 Modem fallback sequence
1.2.1 V17, V29, and V27 ter
1.2.2 V34 fallback
1.3 V8/V34 sequence
1.3.1 V34
1.3.2 Sample of a signal procedure at sending two pages
1.3.3 Procedure details
1.3.4 Common signal bit definition
1.3.5 Phase 2 (Probing)
1.3.6 Phase 3
1.3.7 Re-synchronization procedure / Startup procedure
1.3.8 Other
2. FUNCTION
2.1 Telephone function
2.1.1 TEL/FAX switching
2.2 F-code
2.2.1 Signal format
2.2.2 F-code confidential transmission
2.2.3 F-code bulletin board polling
2.2.4 F-code relay transmission
2.3 Transmission function
2.3.1 Original scan mode
2.4 Reception function
2.4.1 Reduction / division of reception
2.4.2 Cassette / paper selection
2.4.3 Compulsory memory reception
2.4.4 Closed reception (Junk FAX)

PQ THEORY OF OPERATION HD-524
1. CONFIGURATION
1.1 Outline
1.1.1 About RAID 1
1.2 Unit configuration
2. OPERATION
2.1 HDD master/slave automatic switching control
2.2 HDD failure detection control
2.2.1 A master drive error has occurred (CD013)
2.2.2 A slave drive error has occurred (CD014)
2.2.3 A master-slave drive error has occurred (CD015)
2.2.4 A master drive error has occurred during the HDD mirroring rebuilding (CD016)
2.2.5 A slave drive error occurred during the HDD mirroring rebuilding (CD017)
2.3 HDD mirroring rebuild
2.3.1 Example: When HDD (B) is installed and rebuilding is executed
2.3.2 Example: When an HDD (A) R/W error occurs and HDD is replaced
2.4 Format HDD

PR THEORY OF OPERATION CU-101/MK-745
1. CONFIGURATION
2. OPERATION
2.1 Exhaust control
2.2 Filter configuration
2.3 Airflow
2.4 Operation timing

PS THEORY OF OPERATION CU-102
1. CONFIGURATION
2. OPERATION
2.1 Exhaust control
2.2 Filter configuration
2.3 Airflow
2.4 Operation timing

S) LAYOUT DRAWINGS FOR RELATED PARTS BY EACH TROUBLE CODE
1. C0002
2. C0106
2.1 PC-110/PC-210
2.2 PC-410
3. C0107
3.1 PC-110/PC-210
3.2 PC-410
4. C0108
5. C0109
6. C0202
7. C0204
8. C0206
9. C0208
10. C0210
11. C0211
12. C0214
13. C0216
14. C1004, CC155, CD704
15. C1081
16. C1102
16.1 FS-533
16.2 FS-534/FS-534SD
17. C1103
17.1 FS-533
17.2 FS-534/FS-534SD
18. C1105
19. C1106
19.1 FS-533
19.2 FS-534/FS-534SD
20. C1109
20.1 FS-533
20.2 FS-534/FS-534SD
21. C1112
22. C1113
23. C1114
24. C1115
25. C1132
25.1 FS-533+PK-519
25.2 FS-534+PK-520/FS-534SD+PK-520
26. C1140
26.1 FS-533
26.2 FS-534/FS-534SD
27. C1141
28. C1144
29. C1145
30. C1156
31. C1182
32. C1184
33. C1195
34. C1196
35. C1197
36. C11A1
37. C11A2
38. C11E1
39. C1402
40. C2152, C2153, C2154, C2155, C2156
41. C2253, C2254
42. C2255, C2256
43. C2355
44. C2411, C2552, C2561
45. C2412, C2554, C2562
46. C2413, C2556, C2563
47. C2414, C2558, C2564
48. C2551
49. C2553
50. C2555
51. C2557
52. C2559
53. C255A
54. C255B
55. C255C
56. C2650, CC163
57. C2A11, C2A12, C2A13, C2A14
58. C2A21, C2A22, C2A23, C2A24
59. C3101, C3103
60. C3201, C3202
61. C3302
62. C3425
63. C3722, C3922
64. C3725, C3825, C3925, C392A
65. C3726, C3826, C3926
66. C3731
67. C392B
68. C4091 – C40A4, C5601, C5605, C5606, CA051 – CA053, CC151, CC152, CC15C, CC170 – CC186, CC191 –
CC216, CD211 – CD261, CD401 – CD413, CD701 – CD703, CD705, CD706, CE001, CE003 – CE305, CEEE1, CEEE3
S-84
69. C4101
70. C4501
71. C5102, C5103
72. C5351
73. C5355
74. C5360
75. C5370
76. C5501
77. C5603, C5610, C5611
78. C5604
79. C6001
80. C6002
81. C6102, C6103
82. C6104, C6105
83. C6704, C6751, CDF50, CDF70, CDFA0
84. C6752
85. C6753
86. C6754, C6755
87. C6756
88. C6901, C6902, C6903
89. C6911, C6912, C6913
90. C6F01, C6F02, C6F03, C6F04, C6F05, C6F07, C6F08, C6F09, C6F0A, C6FFDC, C6FDD
91. C8101
91.1 DF-629
91.2 DF-704
92. C8107
92.1 DF-629
92.2 DF-704
93. C8302
93.1 DF-629
93.2 DF-704
94. C8401, CC156
95. C9401, C9402
96. C9403, C9404
97. CC159, CC15A
98. CC15B
99. CC164, CD3A0
100. CC190, CD002, CD004, CD00F, CD020, CD050
101. CD010, CE002
102. CD011, CD012, CD013, CD014, CD015, CD016, CD017, CD030, CD041, CD042, CD043, CD044, CD045,
CD046, CD047, CD048, CD049, CD04A, CD04B
103. CD201, CD202, CD203, CD271
104. CD272
105. CD392
106. CDF51, CDF71, CDFA1
107. CED01
108. CEEE2