Panasonic DP3510, DP4510, DP6010, DP3520, DP4520, DP6020, DP3530, DP4530, DP6030, Service Manual + Service HandBook Manual & Parts List

Service Manual + Service HandBook Manual & Parts List Panasonic DP3510, DP4510, DP6010, DP3520, DP4520, DP6020, DP3530, DP4530, DP6030;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Panasonic.
You can print, zoom or read any diagram, picture or page from this manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Panasonic DP3510, DP4510, DP6010, DP3520, DP4520, DP6020, DP3530, DP4530, DP6030. You can find easily everything what do you need.
To see what contain, please read table of contents:

Content for SERVICE MANUAL:
SPECIFICATIONS TABLE
1.1. Copy Function
1.2. Fax, Printer, Network Scanner and Internet Fax Functions
1.3. System Combination
1.4. Options and Supplies List
1.5. External View
1.6. Control Panel
1.7. Fans and Motors
1.8. Sensors
1.9. Clutches and Switches
1.10. PC Boards

DISASSEMBLY INSTRUCTIONS
2.1. General Disassembly
2.2. Disassembly Instructions
2.3. Screw Identification Template

MAINTENANCE, ADJUSTMENTS AND CHECK POINTS
3.1. Preventive Maintenance
3.2. Required Tools
3.3. Preventive Maintenance Points
3.4. Preventive Maintenance Check List
3.5. Resetting the P/M (Preventive Maintenance) Counter
3.6. Updating the Firmware
3.7. Copy Quality Adjustment Procedure (Order)
3.8. Adjusting the Printer Registration, LSU Image Side to Side
3.9. QUANTUM Control in F8-14
3.10. Calibrating the LCD

TROUBLESHOOTING
4.1. Initial Troubleshooting Flowchart
4.2. Improper LCD Display
4.3. Printed Copy Quality Problems
4.4. Troubleshooting the LAN Interface
4.5. Error Codes (For Copier)
4.6. Information Codes Table (For Facsimile)
4.7. Diagnostic Codes (For Facsimile)
4.8. Troubleshooting (For Printer)

SERVICE MODES
5.1. Service Modes (For Copier)
5.2. Service Modes (For Facsimile)

SYSTEM DESCRIPTION
6.1. Copy Process
6.2. Precautions with Consumables
6.3. New Digital Image Control Qualitative
Reasoning Based Adaptive Controller (New Digital QUANTUM)
6.4. Inverting Automatic Document Feeder (i-ADF)
6.5. Glossary of Electrical Abbreviations

INSTALLATION
7.1. Precautions During Set Up
7.2. Unpacking
7.3. Installation Procedure
7.4. Adjustment

OPTIONS AND SUPPLIES
8.1. Service Notes “Firmware Update” for PCL-IPX/SPX or PS-IPX/SPX Option Installation (For DP-3530/4530/6030)
8.2. Service Notes “Firmware Update” for PCL-IPX/SPX or PS-IPX/SPX Option Installation (For DP-3520/4520/6020)
8.3. Service Notes for “Firmware Update” for PCL or PS Option Installation (For DP-3510/4510/6010)
8.4. Installing the Printer Controller Module for GDI-IPX/SPX (DA-GC601) (Not Available in the USA/Canada)
8.5. Installing the Printer Controller Module for PCL6-IPX/SPX (DA-PC602)
8.6. Installing the Printer Controller Module for PCL6-IPX/SPX (DA-PC601)
8.7. Installing the Printer Controller Module for PCL6 (DA-PC600)
8.8. Installing the Printer Controller Module for PS / PCL6-IPX/SPX (DA-MC602)
8.9. Installing the Printer Controller Module for PS / PCL6-IPX/SPX (DA-MC601)
8.10. Installing the Printer Controller Module for PS / PCL6 (DA-MC600)
8.11. Installing the Network Scanner Module (DA-NS600)
8.12. Installing the Network Scanner Module for DDS (DA-NS601)
8.13. Installing the Internet Fax / E-Mail Module (DA-NF600)
8.14. Installing the Fax Communication Board (DA-FG600)
8.15. Installing the Hard Disk Drive Unit (DA-HD60)
8.16. Installing the Accounting Software (DA-WA10)
8.17. Installing the DD Server Software (DA-WS20)
8.18. Installing the Expansion F-ROM Board (DA-EM600)
8.19. Installing the Sorting Image Memory 16/64/128 MB (DA-SM16B/64B/28B)
8.20. Installing the Expansion Flash Memory Card 4/8 MB (UE-410047/410048)
8.21. Installing the System Console 1 (DA-DS603) / Console 2 (DA-DS604)
8.22. Installing the System Console 1 (DA-DS601) / Console 2 (DA-DS602)
8.23. Installing the 3000-Sheet Tray (DA-MA301)
8.24. Installing the Letter / Legal Size Adapter for 3000-Sheet Tray (DA-TK31)
8.25. Installing the Exit Tray (DA-XT600)
8.26. Installing the 2 Bin Finisher (DA-FS600)
8.27. Installing the 2 Bin Saddle-Stitch Finisher (DA-FS605)
8.28. Installing the Punch Unit (DA-SP31)
8.29. Installing the 2 Bin Finisher (DA-FS330)
8.30. Installing the 1 Bin Saddle-Stitch Finisher (DA-FS355A)
8.31. Installing the Punch Unit (DA-SP41)
8.32. Installing the Power Supply for Finisher (DA-PW600)
8.33. Installing the Key Counter Harness Kit (DZTY000128)
8.34. Installing the Dehumidifier Heater (DZTQ000041)
8.35. Replacing the OPC Drum

GENERAL NETWORK INFORMATION
9.1. Network Protocol
9.2. Layer Functions and
Technology
9.3. Network Layer
9.4. Transport Layer
9.5. Upper Layer
9.6. SMTP (Simple Mail Transfer Protocol)
9.7. ITU T.37 and RFC2305
9.8. Communication Protocols
9.9. POP (Post Office Protocol Version 3)
9.10. Troubleshooting from a PC
9.11. Verifying the Configuration and Mail Account Type (SMTP or POP)
9.12. Dynamic Host Configuration Protocol (DHCP) – Extended Feature
9.13. Message Disposition Notifications (MDN) – Extended Feature
9.14. Lightweight Directory Access Protocol (LDAP) – Extended Feature
9.15. Lightweight Challenge-response Mechanism POP (APOP) – Extended Feature
9.16. SMTP Service Extension for Authentication (SMTP Auth) – Extended Feature
9.17. Direct Internet Fax XMT – Extended Feature

SCHEMATIC DIAGRAM
10.1. General Circuit Diagram Finisher Options
11.1. DA-FS600, DA-FS605, DA-SP31
11.2. DA-FS330
11.3. DA-FS355, DA-SP41

——————

Content for SERVICE HANDBOOK MANUAL:
Specifications Table
1.1. Copy Function
1.2. Fax, Printer, Network Scanner and
Internet Fax Functions
1.3. System Combination
1.4. Options and Supplies List

Maintenance, Adjustments and Check Points
2.1. Preventive Maintenance
2.2. Required Tools
2.3. Preventive Maintenance Points
2.4. Preventive Maintenance Check List
2.5. Resetting the P/M (Preventive Maintenance) Counter
2.6. Updating the Firmware
2.7. Copy Quality Adjustment Procedure (Order)
2.8. Adjusting the Printer Registration, LSU Image Side to Side
2.9. QUANTUM Control in F8-14
2.10. Calibrating the LCD

Troubleshooting
3.1. Error Codes (For Copier)
3.2. Information Codes Table (For Facsimile)

Service Modes
4.1. Service Modes (For Copier)
4.2. Service Modes (For Facsimile)

Exploded View & Parts List
5.1. Destination Codes
5.2. Cover Assembly
5.3. Control Panel Unit
5.4. Inverting Automatic Document Feeder
5.5. Scanner Unit
5.6. Hopper Unit
5.7. Developer Unit
5.8. Drum Unit
5.9. Fuser Unit (For DP-4520/4530/6020/6030 from 1st lot and DP-4510/6010 from December 2003 production)
5.10. Fuser Unit (For DP-3520/3530 from 1st lot and DP-3510 from December 2003 production)
5.11. Fuser Unit (For DP-4510/6010 up to November 2003 production)
5.12. Fuser Unit (For DP-3510 up to November 2003 production)
5.13. Automatic Duplex Unit
5.14. Drive Unit
5.15. Paper Feed Module
5.16. Electrical Parts
5.17. Frame Parts
5.18. 1st Paper Tray
5.19. 2nd Paper Tray
5.20. Sheet Bypass
5.21. 3rd / 4th Paper Tray
5.22. 4th Paper Tray (Storage Tray)
5.23. Packing and Accessories
5.24. Paper Exit Transportation
5.25. PC Boards
5.26. 3000-Sheet Tray
5.27. Letter-R / Legal Size Adapter For 3000-Sheet Tray (USA and Canada Only)
5.28. System Console
5.29. Hardware Identification Template
Exploded View & Parts List of 2-Bin Finisher (DA-FS600), 2-Bin Saddle-Stitch Finisher (DA-FS605)
6.1. Assembly Location Diagram
6.2. Attachment Parts
6.3. External Covers, Panels, etc
6.4. Finisher Main Body
6.5. Harness Main Body Assembly
6.6. Tray Frame Assembly
6.7. Tray Drive Assembly
6.8. Feeder Drive Assembly
6.9. Feeder Assembly
6.10. Center Feeder Assembly
6.11. Buffer Upper Guide Assembly
6.12. Inlet Feeder Assembly
6.13. Swing Assembly
6.14. Swing Guide Assembly
6.15. Stapler Tray Assembly
6.16. Stapler Assembly
6.17. Saddle Assembly (2-Bin Saddle-Stitch Finisher)
6.18. Saddle Guide Assembly (2-Bin Saddle-Stitch Finisher)
6.19. Stapler Assembly (2-Bin Saddle-Stitch Finisher)
6.20. Pass Lower Guide Assembly (2-Bin Saddle-Stitch Finisher)
6.21. Inner Side Plate Assembly (2-Bin Saddle-Stitch Finisher)
6.22. Saddle Delivery Assembly (2-Bin Saddle-Stitch Finisher)
6.23. Motor Mount Assembly (2-Bin Saddle-Stitch Finisher)
6.24. Finisher Controller PCB Assembly
6.25. Saddle Controller PCB Assembly (2-Bin Saddle-Stitch Unit)
6.26. List of Connectors
Exploded View & Parts List of Punch Unit
(DA-SP31)
7.1. Assembly Location Diagram
7.2. Attachment Parts
7.3. Punch Main Body
7.4. Punch Slide Assembly
7.5. Punch Driver PCB Assembly
7.6. List Of Connectors
7.7. List of Standard Fasteners
Exploded View & Parts List of 2-Bin Finisher
(DA-FS330)
8.1. Finisher Mounting Kit
8.2. Covers
8.3. Main Body
8.4. Transport Section 1
8.5. Transport Section 2
8.6. Elevate Section
8.7. Finisher Driver PCB Assembly
Exploded View & Parts List of 1-Bin Saddle-
Stitch Finisher (DA-FS355A)
9.1. Assembly Location Diagram
9.2. Mounting Hardware
9.3. External Covers, Panels, etc
9.4. Internal Components 1
9.5. Internal Components 2
9.6. Stack Motor Driver Assembly
9.7. Drive Assembly
9.8. Bundle Support Cover Assembly
9.9. Dispose Assembly
9.10. Paper Feeder Assembly
9.11. Fold Assembly
9.12. Staple Assembly
9.13. DC Controller PCB Assembly
9.14. List of Connectors
9.15. List of Electric Parts
Exploded View & Parts List of Punch Unit
(DA-SP41)
10.1. Assembly Location Diagram
10.2. Puncher Assembly
10.3. Puncher Total Assembly
10.4. List of Connectors
10.5. List of Electric Parts
10.6. List of Standard Fasteners
Alphanumerical Parts List

Number of pages: 1487.