Mimaki UJF-3042HG Mimaki UJF-6042 Service Manual, Parts List Manual, Installation Guide

Service Manual, Parts List Manual, Installation Guide Mimaki UJF-3042HG Mimaki UJF-6042;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Mimaki UJF-3042HG Mimaki UJF-6042.
You can print, zoom or read any diagram, picture or page from this Service Manual, Parts List Manual, Installation Guide. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Mimaki UJF-3042HG Mimaki UJF-6042. You can find easily everything what do you need.
To see what contain, please read table of contents:

Content for Service Manual Maintenance:
1.1 Basic Operation
1.1.1 Sequence at POWER ON
1.1.2 Sequence at POWER OFF
1.1.3 Work Area Sensor
1.1.4 LED-UV UNIT
1.1.5 600cc Cartridge
1.2 Maintenance Function
1.2.1 Carriage out
1.2.2 Wiper Cleaning
1.2.3 Wiper Bottle
1.2.4 Waste Ink Tank
1.2.5 Cartridge Exchange
1.2.6 Filter Check
1.2.7 NOZZLE WASH
1.2.8 Discharge way washing
1.2.9 CUSTODY WASH
1.2.10 HEAD MAINTENANCE
1.3 Ink System

2.1 Block Diagram
2.1.1 Internal Connection Diagram
2.2 Operating Description
2.3 Circuit Board Specifications
2.3.1 Power Supply PCB Assy.
2.3.2 Main PCB Assy.
2.3.3 Keyboard 3042 LC PCB Assy.
2.3.4 3042 Station3 PCB Assy.
2.3.5 HG Slider Relay PCB Assy.
2.3.6 Pump 3 PCB Assy.
2.3.7 ID Contact PCB CN032-2 Assy.
2.3.8 3042 Slider Board FM Assy.
2.3.9 Encorder PCB Assy.
2.3.10 LEDUVx2-DRIVE PCB Assy.
2.3.11 Water cool LED_1inch-UVLED PCB
Assy.

3.1 Ink Related Parts
3.1.1 Replacement of Head Unit
3.1.2 Replacement of Dumper
3.1.3 Replacement of Pump Head
3.1.4 Replacement of Cartridge Guide
Assy.
3.1.5 Replacement of Cartridge Coupling
Assy.
3.2 Driving Parts
3.2.1 Replacement of Z-Driving Screw
3.3 Electrical Parts
3.3.1 Replacement of Main PCB
3.3.2 HG Slider Relay PCB Assy.
Replacement
3.3.3 Replacement of ID Contact PCB
3.4 Sensors
3.5 UV UNIT
3.5.1 Replacement of LEDUV Irradiation
Assy
3.5.2 Replacement of LEDUVx2-DRIVE
PCB Assy

4.1 Operation Matrix
4.2 Adjustment Items
4.2.1 PRINT ADJUST
4.2.2 HEAD ADJUST
4.2.3 CAPPING
4.2.4 ADJUST WIPER
4.2.5 HEAD WASH(#ADJUST)
4.2.6 HEAD ID
4.2.7 HEAD TEMP
4.2.8 EXCHANGE LED UV
4.2.9 SERIAL No.
4.2.10 DEALER No.
4.2.11 ORIGIN ADJUST
4.2.12 TABLE ADJUST
4.2.13 SET QUALITY
4.2.14 FEED COMP.2
4.2.15 ANGLE ADJUST
4.2.16 DEFAULT SET
4.2.17 Head Voltage Adjustment
4.2.18 Shot Count Reset
4.2.19 Wash Tube
4.2.20 MACHINE NAME(UJF-3042HG)
4.3 Mechanical Adjustment
4.3.1 Adjustment of theTable Flatness
4.3.2 Carriage height Adjustment
4.3.3 Carriage Front/Rear Tilt Adjustment
4.3.4 LED-UV Unit Height Adjustment
4.3.5 Work Area Sensor Height Adjustment
4.3.6 Y drive belt tension adjustment

5.1 Test Items
5.1.1 CHECK PATTERN
5.1.2 AGEING
5.1.3 SENSOR TEST
5.1.4 PARAM. DRAW
5.1.5 MEMORY CHECK
5.1.6 Key Board Test
5.1.7 LCD Test
5.1.8 Temperature Check
5.1.9 UV LEVEL Check
5.1.10 INK IC Check
5.1.11 INK TEST
5.1.12 ENCORDER Check
5.1.13 EVENT LOG
5.1.14 Message Check
5.1.15 HW Test
5.2 Other Test
5.2.1 Ink route leak confirmation procedure

6.1 Covers
6.1.1 Cover Layout
6.1.2 Key Panel Assy
6.1.3 “Tube_FFC Holder” Stick the
Protection tape
6.2 Ink-related Parts
6.2.1 Head Assy
6.2.2 Dumper
6.2.3 Pump Head
6.2.4 Station Assy.
6.2.5 Wipe Suction Pump Assy.
6.2.6 Cartridge Guide Assy.
6.2.7 Cartridge Coupling Assy.
6.2.8 Cartridge valve Assy.
6.2.9 Capping
6.2.10 Wiper unit Assy(Belt, Sensor)
6.2.11 Circulation Pump Assy.
6.3 Driving Parts
6.3.1 X-axis Motor Assy
6.3.2 Y-axis Motor
6.3.3 Table
6.3.4 Z-Driving Screw
6.3.5 Slider Relay Cooling Fan Assy
6.3.6 Mist Suction Fan Assy
6.3.7 Linear Encorder Scale
6.3.8 X Reducer Assy
6.3.9 X Gear Box
6.3.10 Motor Coupling
6.4 PCBs
6.4.1 Power Supply PCB Assy
6.4.2 Main PCB
6.4.3 3042 Slider Relay PCB Assy
6.4.4 3042 Station 3 PCB Assy
6.4.5 Slider PCB
6.4.6 3042 Pump 3 PCB Assy
6.4.7 ID Contact PCB
6.4.8 Keyboard PCB
6.4.9 Linear Encoder PCB
6.5 Sensors
6.5.1 X origin sensor
6.5.2 Z origin sensor
6.5.3 Work area sensor
6.5.4 Cover sensor
6.5.5 Table Cover sensor
6.6 Other Electrical Parts
6.7 UV Parts
6.7.1 LED UV UNIT
6.7.2 UV Cooling Unit
6.7.3 Cooling Water Pump
6.7.4 Radiator Fan Assy.
6.8 Greasing

7.1 Details on Errors and Malfunctions
7.1.1 Concerning Errors and Malfunctions
7.1.2 List of Error Messages
7.1.3 List of Warning Messages
7.1.4 List of SYSTEM HALT
7.1.5 Troubles Without Messages
Displayed
7.2 Detailed Methods of Coping with the
Malfunctions
7.2.1 Cannot start for “SYSTEM HALT(1)
11c:SLDR PCB H”
7.2.2 Discharging defect cannot be
improved by cleaning.

8.1 Basic Operation
8.1.1 Start
8.2 Print Mode
8.2.1 LOCAL / REMOTE
8.2.2 FUNCTION
8.2.3 SETUP
8.2.4 MAINTENANCE
8.2.5 MACHINE SETUP
8.3 Service Mode
8.3.1 #ADJUST
8.3.2 #TEST
8.3.3 #PARAMETER

—————–

Content ofr Parts List Manual:
0. RECOMMENDED PARTS LIST
1. COVER ASSY. -1/2
2. FRAME ASSY. -1/2
3. Z TABLE ASSY. -1/4 (FAN)
3. Z TABLE ASSY. -1/4 (UJF-6042)
4. X GEAR BOX ASSY.
5. POWER SUPPLY CHASSIS ASSY.
6. CHASSIS ASSY. -1/2
7. KEYBOARD ASSY.
8. Y BAR ASSY.
9. Y DRIVE ASSY.
10. BEAR ASSY.
11. STATION ASSY.
12. WIPER ASSY.
13. PUMP ASSY.
14. LED-UV WATER COOLING UNIT ASSY.
15. HEAD ASSY. -1/3
16. UV LAMP ASSY.
17. CARTRIDGE ASSY. -1/2
18. WASTE INK ASSY.
19. PACKING ASSY. -1/3
20. BLOCK DIAGRAM

Total number of pages: 463.