Konica Minolta Bizhub C368 Bizhub C308 Bizhub C258 – Full Manual: Field Service Manual, Theory of Operation, Parts List Manual

Full Manual: Field Service Manual, Theory of Operation, Parts List Manual Konica Minolta Bizhub C368 Bizhub C308 Bizhub C258;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Konica Minolta Bizhub copier.
You can print, zoom or read any diagram, picture or page from this Field Service Manual, Theory of Operation, Parts List Manual. Every chapter on this manual is fully detailed and contain all theĀ  simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Konica Minolta Bizhub C368 Bizhub C308 Bizhub C258 photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

Content for FIELD SERVICE & THEORY OF OPERATION:
Table of Contents
Revision List
Bizhub C368/C308/C258 Function Version 2.0
A. SAFETY AND IMPORTANT WARNING ITEMS
1. IMPORTANT NOTICE
2. DESCRIPTION ITEMS FOR DANGER, WARNING AND CAUTION
2.1 Description items in this Service Manual
2.2 Description items for safety and important warning items
3. SAFETY WARNINGS
3.1 MODIFICATIONS NOT AUTHORIZED BY KONICA MINOLTA, INC
3.1.1 Actions requiring special attention
3.2 POWER PLUG SELECTION
3.2.1 Power Cord Set or Power Plug
3.3 CHECKPOINTS WHEN PERFORMING ON-SITE SERVICE
3.3.1 Power Supply
3.3.2 Installation Requirements
3.3.3 After Service
3.4 FUSE
3.5 Used Batteries Precautions
3.5.1 ALL Areas
3.5.2 Germany
3.5.3 France
3.5.4 Denmark
3.5.5 Finland, Sweden
3.5.6 Norway
3.6 Laser Safety
3.6.1 Laser Safety
3.6.2 Internal Laser Radiation
3.6.3 Laser Safety Label
3.6.4 Laser Caution Label
3.6.5 PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT
4. WARNING INDICATIONS ON THE MACHINE
4.1 Warning indications inside the machine
4.2 Warning indications on the boards
5. MEASURES TO TAKE IN CASE OF AN ACCIDENT

B. NOTATION OF THE CONTENTS
1. PRECAUTION ON HANDLING THIS MANUAL
2. PRODUCT NAME
3. BRAND NAME
3.1 TRADEMARKS OF OTHER COMPANIES
3.2 OWN TRADEMARKS
4. FEEDING DIRECTION

C. PRODUCT SPECIFICATIONS
1. Bizhub C368/C308/C258
1.1 Type
1.2 Function
1.3 Paper
1.4 Material
1.4.1 Specified conditions of field standard yield
1.5 Print volume
1.6 Machine specification
1.7 Operating environment
1.8 Print function
1.9 Scan function
1.10 Note for the Specifications
2. DF-629
2.1 Type
2.2 Function
2.3 Type of document
2.4 Particular original
2.5 Prohibited original
2.6 Mixed original feed chart
2.6.1 For metric area
2.6.2 For inch area
2.7 Machine specification
2.8 Operating environment
2.9 Note for the Specifications
3. DF-704
3.1 Type
3.2 Function
3.3 Type of document
3.4 Particular original
3.5 Prohibited original
3.6 Mixed original feed chart
3.6.1 For metric area
3.6.2 For inch area
3.7 Machine specification
3.8 Operating environment
3.9 Note for the Specifications
4. PC-210/PC-110
4.1 Type
4.2 Paper
4.3 Machine specification
4.4 Operating environment
4.5 Note for the Specifications
5. PC-410
5.1 Type
5.2 Paper
5.3 Machine specification
5.4 Operating environment
5.5 Note for the Specifications
6. LU-302
6.1 Type
6.2 Paper
6.3 Machine specification
6.4 Operating environment
6.5 Note for the Specifications
7. JS-506
7.1 Type
7.2 Function
7.3 Capacity
7.4 Offset function
7.5 Machine specification
7.6 Operating environment
7.7 Note for the Specifications
8. FS-533
8.1 Type
8.2 Function
8.3 Paper process ability
8.3.1 Non sort/sort/group
8.3.2 Sort offset/group offset
8.3.3 Sort staple
8.4 Machine specification
8.5 Operating environment
8.6 Note for the Specifications
9. PK-519
9.1 Type
9.2 Function
9.3 Paper
9.4 Machine specification
9.5 Operating environment
9.6 Note for the Specifications
10. FS-534/FS-534SD
10.1 Type
10.2 Function
10.3 Paper process ability
10.3.1 Non sort/sort/group
10.3.2 Sort offset/group offset
10.3.3 Sort staple
10.3.4 Saddle stitching/folding
10.3.5 Tri-folding
10.4 Machine specification
10.5 Operating environment
10.6 Note for the Specifications
11. PK-520
11.1 Type
11.2 Functions
11.3 Paper
11.4 Machine specification
11.5 Operating environment
11.6 Note for the Specifications
12. CU-101
12.1 Type
12.2 Machine specification
12.3 Operating environment
12.4 Note for the Specifications
13. FK-514/FK-515
13.1 Basic specifications
13.1.1 General specifications
13.1.2 Scanning section
13.1.3 Recording section
13.1.4 Line connecting section
13.1.5 Control panel section
13.2 Functional specification
13.2.1 Dial functions
13.2.2 Transmission
13.2.3 Polling
13.2.4 Line seizure mode and telephone function
13.2.5 Message reception and record
13.2.6 Memory function
13.2.7 Various communication function
13.2.8 User lists / reports
13.2.9 Other user functions
13.3 Network fax specification
13.3.1 Internet Fax
13.3.2 IP Address Fax
14. i-Option LK-102 v3/104 v3/105 v4/106/107/108/110 v2/111/114/115 v2
14.1 Available function for i-Option
14.1.1 List of advanced functions
14.1.2 Types of advanced functions
14.1.3 Activation procedures of i-Option
14.2 Web browser function

D. OVERALL COMPOSITION
1. SYSTEM CONFIGURATION
1.1 System configuration
1.1.1 System front view 1
1.1.2 System front view 2
1.2 Optional configuration
1.2.1 Combination configuration of main body and document options
1.2.2 Combination configuration of main body and paper feed options
1.2.3 Combination configuration of main body and post-processing options
1.2.4 Combination of main body and fax kit
1.2.5 Combination of main body (scanner section) and heater
1.2.6 Combination configuration of paper feed options and dehumidifier heater
2. SECTION CONFIGURATION
3. PAPER PATH
4. CONTROL BLOCK DIAGRAM
5. IMAGE CREATION PROCESS
6. IMAGE FORMING CONTROL
7 PROCESS SPEED
E SERVICE TOOL
1. bizhub C368/C308/C258
1.1 Service material list
1.2 CE tool list
1.3 Utility tool
1.3.1 IC card information setting tool of AU-201/AU-201S/AU-202H/OMNIKEY 5427CK (AU-205H)/SCL-010/YSoft card reader
2. DF-629/DF-704
2.1 CE tool list

F. PERIODICAL MAINTENANCE
1. Concept of periodical maintenance
2. Periodical maintenance items
2.1 Main unit
2.1.1 Bizhub C368
2.1.2 Bizhub C308
2.2 Option
2.2.1 DF-704
2.2.2 DF-629
2.2.3 PC-110/PC-410
2.2.4 PC-210
2.2.5 FS-534
2.2.6 FS-534SD
2.2.7 FS-533
3. Periodical replacement parts list
3.1 bizhub C368/C308/C258
3.2 Option
3.2.1 DF-704
3.2.2 DF-629
3.2.3 PC-110
3.2.4 PC-210
3.2.5 PC-410
3.2.6 LU-302
3.2.7 FS-534
3.2.8 FS-534SD
3.2.9 FS-533
4. Periodical cleaning parts list
4.1 Main unit
4.2 DF-704
4.3 DF-629
4.4 FS-534
4.5 FS-534SD
4.6 FS-533
5. Concept of parts life
5.1 Life value of consumables and parts
5.2 Details of the life specifications
5.3 Control causing inhibited printing for one part when an inhibited-printing event occurs in another part
5.3.1 Outline
5.3.2 Target parts
5.3.3 Threshold value
6. Periodical maintenance procedure bizhub C368/C308/C258
6.1 Photo conductor section
6.1.1 Replacing the drum unit
6.2 Developing section
6.2.1 Replacing the developing unit
6.3 Toner supply section
6.3.1 Replacing the toner cartridge
6.4 1st transfer section
6.4.1 Cleaning of the image transfer entrance guide
6.4.2 Cleaning of the IDC sensor window
6.4.3 Replacing the transfer belt unit
6.5 2nd transfer/separation section
6.5.1 Replacing the transfer roller unit
6.6 Toner collection section
6.6.1 Replacing the waste toner box
6.6.2 Cleaning of the area around the waste toner collecting port
6.7 Paper feed section
6.7.1 Replacing the tray 1 feed roller, tray 1 pick-up roller, tray 1 separation roller
6.7.2 Replacing the tray 2 feed roller, tray 2 pick-up roller, tray 2 separation roller
6.7.3 Replacing the manual bypass tray feed roller, manual bypass tray separation roller assy
6.8 Registration section
6.8.1 Cleaning of the registration roller
6.9 Fusing section
6.9.1 Replacing the fusing unit
6.10 Duplex section
6.10.1 Cleaning of the duplex transport rollers
7. Periodical maintenance procedure DF-629
7.1 Take-up section
7.1.1 Cleaning of the pick-up roller/feed roller
7.1.2 Cleaning of the separation roller
7.1.3 Replacing the paper feed assy
7.1.4 Replacing the pick-up roller/feed roller
7.1.5 Replacing the separation roller assy
7.2 Transport section
7.2.1 Cleaning of the miscellaneous rolls
7.2.2 Cleaning of the miscellaneous rollers
7.3 Scanning section
7.3.1 Cleaning of the scanning guide
7.3.2 Cleaning of the reflective sensor section
8. Periodical maintenance procedure DF-704
8.1 Take-up section
8.1.1 Cleaning of the pick-up roller/feed roller
8.1.2 Cleaning of the separation roller
8.1.3 Replacing the paper feed assy
8.1.4 Replacing the pick-up roller/feed roller
8.1.5 Replacing the separation roller assy
8.2 Transport section
8.2.1 Cleaning of the miscellaneous rolls
8.2.2 Cleaning of the miscellaneous rollers
8.3 Scanning section
8.3.1 Cleaning of the front side scanning guide
8.3.2 Cleaning of the reflective sensor section
9. Periodical maintenance procedure PC-110/PC-210
9.1 Paper feed section
9.1.1 Replacing the tray 3 feed roller, tray 3 pick-up roller, tray 3 separation roller
9.1.2 Replacing the tray 4 feed roller, tray 4 pick-up roller, tray 4 separation roller
10. Periodical maintenance procedure PC-410
10.1 Paper feed section
10.1.1 Replacing the feed roller, pick-up roller, separation roller
11. Periodical maintenance procedure LU-302
11.1 Paper feed section
11.1.1 Replacing the pick-up roller
11.1.2 Replacing the feed roller
11.1.3 Replacing the separation roller
12. Periodical maintenance procedure FS-534/FS-534SD
12.1 Paper exit section
12.1.1 Cleaning procedure for each rollers/each rolls
12.1.2 Cleaning the paddles
12.1.3 Replacing the paddle units
12.1.4 Cleaning procedure for each rollers/each rolls
12.1.5 Cleaning the upper paddle
12.1.6 Cleaning the lower paddle
12.1.7 Replacing the upper paddle assy
12.1.8 Replacing the lower paddle unit
13. Periodical maintenance procedure FS-533
13.1 Paper exit section
13.1.1 Cleaning procedure for each parts
13.1.2 Cleaning the paper exit paddle
13.2 Alignment section
13.2.1 Replacing the alignment roller assy F/R

G. DISASSEMBLY/REASSEMBLY
1. Disassembly/adjustment prohibited items
1.1 Paint-locked screws
1.2 Red-painted screws
1.3 Variable resistors on board
1.4 Warnings for disassembly
1.5 Warnings / Precautions during setup or transportation
2. Units from which removing is prohibited
2.1 CCD board
2.1.1 Reason for prohibition
2.2 PH unit
2.2.1 Reason for prohibition
2.3 Fusing unit
2.3.1 Reason for prohibition
3. Disassembly/assembly warning/caution items
3.1 Removal/installing of PWBs
3.2 Use a special screw
4. Notes when transporting the machine
4.1 Protective materials
4.1.1 Protective materials for the photo conductors
4.1.2 Scanner packing bracket
5. Bizhub C368/C308/C258
5.1 Disassembly/reassembly parts list
5.1.1 Exterior parts
5.1.2 Units
5.1.3 Boards
5.1.4 Motors
5.1.5 Clutches
5.1.6 Fan
5.1.7 etc
5.2 Disassembly/reassembly procedure (Exterior parts)
5.2.1 Scanner rear cover
5.2.2 Scanner right cover
5.2.3 Scanner front cover
5.2.4 Scanner left cover
5.2.5 Scanner upper rear cover
5.2.6 Control panel left cover/1
5.2.7 Control panel left cover/2
5.2.8 Control panel right cover
5.2.9 Control panel upper cover
5.2.10 Control panel front cover
5.2.11 Control panel unit
5.2.12 Original glass
5.2.13 Front door
5.2.14 Front lower cover
5.2.15 Front cover
5.2.16 Left cover
5.2.17 Exit tray
5.2.18 Rear right cover
5.2.19 Upper right cover
5.2.20 Lower rear cover
5.2.21 Protective sheet
5.2.22 Upper rear cover
5.2.23 Tray 1
5.2.24 Tray 2
5.3 Disassembly/reassembly procedure (Units)
5.3.1 LED exposure unit
5.3.2 Paper feed unit
5.3.3 PH unit
5.3.4 Sub hopper unit
5.3.5 Right door unit
5.3.6 Manual bypass tray unit
5.3.7 Regist unit
5.3.8 Hard disk (A)
5.3.9 How to open the PWB box
5.3.10 Main drive unit
5.3.11 Transport unit
5.3.12 Fusing drive unit
5.3.13 Hopper drive unit
5.4 Disassembly/reassembly procedure (Boards)
5.4.1 CCD board (CCDB)
5.4.2 Tray 1 CD paper size board (CDPSB/1), tray 2 CD paper size board (CDPSB/2)
5.4.3 DC power supply (DCPU)
5.4.4 EEPROM/1, EEPROM/2
5.4.5 eMMC board (eMMC)
5.4.6 Tray 1 FD paper size board (FDPSB/1), tray 2 FD paper size board (FDPSB/2)
5.4.7 Front side board (FRB)
5.4.8 High voltage unit (HV)
5.4.9 Machine condition monitor board (MCMB)
5.4.10 MFP board (MFPB)
5.4.11 Tray 1 empty indicator board (PEIB/1), tray 2 empty indicator board (PEIB/2)
5.4.12 PH relay board (PHRYB)
5.4.13 Scanner drive board (SCDB)
5.5 Disassembly/reassembly procedure (Motors)
5.5.1 Transport motor (M1)
5.5.2 PC motor (M2)
5.5.3 Fusing motor (M3)
5.5.4 Reverse motor (M4)
5.5.5 ADU transport motor (M5)
5.5.6 Toner supply motor/K (M6)
5.5.7 Toner supply motor/C (M7)
5.5.8 Toner supply motor/M (M8)
5.5.9 Toner supply motor/Y (M9)
5.5.10 Toner cartridge motor/Y,M,C (M10)
5.5.11 Fusing pressure motor (M11)
5.5.12 Tray 1 lift-up motor (M12)
5.5.13 Tray 2 lift-up motor (M13)
5.5.14 Developing motor (M21)
5.5.15 Toner cartridge motor/K (M25)
5.5.16 Scanner motor (M201)
5.6 Disassembly/reassembly procedure (Clutches)
5.6.1 Tray 2 paper feed clutch (CL1)
5.6.2 Tray 2 vertical transport clutch (CL2)
5.6.3 Tray 1 paper feed clutch (CL3)
5.6.4 Registration clutch (CL4)
5.6.5 1st transfer pressure clutch (CL5)
5.6.6 ADU transport clutch (CL6)
5.6.7 Bypass paper feed clutch (CL7)
5.6.8 Paper exit clutch (CL8)
5.7 Disassembly/reassembly procedure (Fans)
5.7.1 Power supply cooling fan (FM1)
5.7.2 Transfer belt cleaner cooling fan (FM2)
5.7.3 Machine rear side cooling fan (FM3)
5.7.4 Toner cartridge cooling fan (FM4)
5.7.5 Paper cooling fan (FM8)
5.8 Disassembly/reassembly procedure (etc.)
5.8.1 Bypass pick-up solenoid (SD1)
5.8.2 IDC sensor shutter solenoid (SD2)
5.8.3 Gate switch solenoid (SD3)
5.8.4 Developing solenoid (SD4)
5.8.5 FAX speaker (SP1)
5.8.6 Bypass CD paper size VR (VR1)
5.8.7 UFP filter/ Deodorant filter
6. Option
6.1 Disassembly/reassembly parts list
6.1.1 DF-629
6.1.2 DF-704
6.1.3 PC-110/PC-210
6.1.4 PC-410
6.1.5 LU-302
6.1.6 JS-506
6.1.7 FS-533
6.1.8 PK-519
6.1.9 FS-534/FS-534SD
6.1.10 SD-511
6.1.11 PK-520
6.1.12 SC-508
6.1.13 UK-211
6.1.14 UK-212
6.1.15 FK-515
6.1.16 FK-514
6.1.17 HD-524
6.1.18 CU-101
6.1.19 KP-101
6.2 Disassembly/reassembly procedure (DF-629/SP-501)
6.2.1 Front cover (DF-629)
6.2.2 Rear cover (DF-629)
6.2.3 Left cover unit (DF-629)
6.2.4 Reverse automatic document feeder (DF-629)
6.2.5 Glass cleaning roller unit (DF-629)
6.2.6 DF control board (DFCB) (DF-629)
6.2.7 Document width size sensor (VR1) (DF-629)
6.2.8 Document reading motor (M1) (DF-629)
6.2.9 Document feed motor (M2) (DF-629)
6.2.10 Registration motor (M3) (DF-629)
6.2.11 Glass cleaning motor (M4) (DF-629)
6.2.12 Reading roll release motor (M5) (DF-629)
6.2.13 DF cooling fan motor (FM1) (DF-629)
6.2.14 Document exit roller release solenoid (SD1) (DF-629)
6.2.15 Stamp unit (SP-501)
6.2.16 Stamp (SP-501)
6.3 Disassembly/reassembly procedure (DF-704/SP-501)
6.3.1 Front cover (DF-704)
6.3.2 Rear cover (DF-704)
6.3.3 Left cover unit (DF-704)
6.3.4 Dual scan document feeder (DF-704)
6.3.5 Front side glass cleaning roller unit (DF-704)
6.3.6 Back side glass cleaning roller unit (DF-704)
6.3.7 CIS module (CIS) (DF-704)
6.3.8 DF control board (DFCB) (DF-704)
6.3.9 Document width size sensor (VR1) (DF-704)
6.3.10 CIS power supply (CISPU) (DF-704)
6.3.11 Dual scan board (DSIPB) (DF-704)
6.3.12 Document reading motor (M1) (DF-704)
6.3.13 Document feed motor (M2) (DF-704)
6.3.14 Registration motor (M3) (DF-704)
6.3.15 Reading roller release motor (M4) (DF-704)
6.3.16 CIS cleaning motor (M5) (DF-704)
6.3.17 Document reading glass cleaning motor (M6) (DF-704)
6.3.18 DF cooling fan motor (FM1) (DF-704)
6.3.19 CIS cable (DF-704)
6.3.20 Stamp unit (SP-501)
6.3.21 Stamp (SP-501)
6.4 Disassembly/reassembly procedure (PC-110/PC-210)
6.4.1 Right door (PC-110/PC-210)
6.4.2 Rear right cover (PC-110/PC-210)
6.4.3 Rear cover (PC-110/PC-210)
6.4.4 Tray 3, tray 4 (PC-110/PC-210)
6.4.5 Paper feed cabinet (PC-110/PC-210)
6.4.6 Tray 3 paper feed unit (PC-110/PC-210)
6.4.7 Tray 4 paper feed unit (PC-210)
6.4.8 PC control board (PCCB) (PC-110/PC-210)
6.4.9 Tray 3 paper empty indicator board (PEIB/3), tray 4 paper empty indicator board (PEIB/4) (PC-110/PC-210)
6.4.10 Tray 3 FD paper size board (FDPSB/3), tray 4 FD paper size board (FDPSB/4) (PC-110/PC-210)
6.4.11 Tray 3 CD paper size board (CDPSB/3) (PC-110/PC-210)
6.4.12 Tray 4 CD paper size board (CDPSB/4) (PC-210)
6.4.13 Tray 3 paper feed motor (M111), tray 4 paper feed motor (M121) (PC-110/PC-210)
6.4.14 Tray 3 vertical transport motor (M112), tray 4 vertical transport motor (M122) (PC-110/PC-210)
6.4.15 Tray 3 lift-up motor (M113), tray 4 lift-up motor (M123) (PC-110/PC-210)
6.5 Disassembly/reassembly procedure (PC-410)
6.5.1 Right door (PC-410)
6.5.2 Rear right cover (PC-410)
6.5.3 Rear cover (PC-410)
6.5.4 Paper feed tray (PC-410)
6.5.5 Paper feed cabinet (PC-410)
6.5.6 Paper feed unit (PC-410)
6.5.7 PC control board (PCCB) (PC-410)
6.5.8 Tray 3 paper empty indicator board (PEIB/3) (PC-410)
6.5.9 Paper feed motor (M131) (PC-410)
6.5.10 Vertical transport motor (M132) (PC-410)
6.5.11 Elevator motor (M134) (PC-410)
6.5.12 Shifter motor (M133) (PC-410)
6.5.13 Wire (PC-410)
6.6 Disassembly/reassembly procedure (LU-302)
6.6.1 Large capacity unit (LU-302)
6.6.2 Upper door (LU-302)
6.6.3 Right cover (LU-302)
6.6.4 Front cover (LU-302)
6.6.5 Rear cover (LU-302)
6.6.6 Feed cover (LU-302)
6.6.7 Lift wire (LU-302)
6.6.8 LU drive board (LUDB) (LU-302)
6.6.9 Lift-up motor (M1) (LU-302)
6.6.10 Dehumidification heater (DH) (LU-302)
6.7 Disassembly/reassembly procedure (JS-506)
6.7.1 Exit tray 1 (JS-506)
6.7.2 Exit tray 2 (JS-506)
6.7.3 Job separator (JS-506)
6.7.4 Sensor unit (JS-506)
6.7.5 JS control board (JSCB) (JS-506)
6.7.6 Tray shift motor (M1) (JS-506)
6.8 Disassembly/reassembly procedure (FS-533)
6.8.1 Front cover (FS-533)
6.8.2 Upper cover (FS-533)
6.8.3 Upper cover (FS-533)
6.8.4 Finisher (FS-533)
6.8.5 Stapler unit (FS-533)
6.8.6 Paper exit tray unit (FS-533)
6.8.7 FS control board (FSCB) (FS-533)
6.8.8 Stapler relay board (STREYB) (FS-533)
6.8.9 Paper conveyance motor (M101) (FS-533)
6.8.10 Paper exit motor (M102) (FS-533)
6.8.11 Alignment roller motor (M103) (FS-533)
6.8.12 Exit roller lift up motor (M104) (FS-533)
6.8.13 Alignment motor/F (M105), Alignment motor/R (M106) (FS-533)
6.8.14 Stapler movement motor (M107) (FS-533)
6.8.15 Tray lift up motor (M109) (FS-533)
6.8.16 Paper surface detect solenoid (SD101) (FS-533)
6.8.17 Batch solenoid (SD102) (FS-533)
6.8.18 Paper exit roller solenoid (SD103) (FS-533)
6.8.19 Paper exit paddle (FS-533)
6.9 Disassembly/reassembly procedure (PK-519)
6.9.1 Punch kit (PK-519)
6.9.2 PK control board (PKCB) (PK-519)
6.9.3 Punch motor (M201) (PK-519)
6.10 Disassembly/reassembly procedure (FS-534/FS-534SD/RU-513)
6.10.1 Rear cover (FS-534/FS-534SD)
6.10.2 Front door (FS-534/FS-534SD)
6.10.3 Front upper cover (FS-534/FS-534SD)
6.10.4 Left lower cover (FS-534/FS-534SD)
6.10.5 Front lower cover (FS-534/FS-534SD)
6.10.6 Finisher (FS-534/FS-534SD)
6.10.7 Relay unit (RU-513)
6.10.8 Stapler unit (FS-534/FS-534SD)
6.10.9 Sensor unit (FS-534/FS-534SD)
6.10.10 Saddle unit (FS-534SD)
6.10.11 FS control board (FSCB) (FS-534/FS-534SD)
6.10.12 RU transport motor (M1) (RU-513)
6.10.13 FNS entry transport motor (M2) (FS-534/FS-534SD)
6.10.14 FNS discharge motor (M3) (FS-534/FS-534SD)
6.10.15 Receiving roller retraction motor (M4) (FS-534/FS-534SD)
6.10.16 FNS paddle motor (M5) (FS-534/FS-534SD)
6.10.17 Trailing edge stopper motor (M6) (FS-534/FS-534SD)
6.10.18 Alignment motor/front (M7) (FS-534/FS-534SD)
6.10.19 Alignment motor/rear (M8) (FS-534/FS-534SD)
6.10.20 Pre-eject drive motor (M9) (FS-534/FS-534SD)
6.10.21 Bundle eject motor (M10) (FS-534/FS-534SD)
6.10.22 Main tray up/down motor (M11) (FS-534/FS-534SD)
6.10.23 Paper receiving control motor (M12) (FS-534/FS-534SD)
6.10.24 Side stapler movement motor (M13) (FS-534/FS-534SD)
6.11 Disassembly/reassembly procedure (SD-511)
6.11.1 Front cover (SD-511)
6.11.2 Paper exit tray (SD-511)
6.11.3 Staple unit (SD-511)
6.11.4 SD drive board (SDDB) (SD-511)
6.11.5 SD transport motor (M1) (SD-511)
6.11.6 Paper discharge control motor (M2) (SD-511)
6.11.7 Alignment motor (M3) (SD-511)
6.11.8 Stopper drive motor (M4) (SD-511)
6.11.9 Center fold roller motor (M5) (SD-511)
6.11.10 Tri-folding guide motor (M6) (SD-511)
6.11.11 SD paddle motor (M7) (SD-511)
6.11.12 Center fold guide motor (M8) (SD-511)
6.11.13 Center fold knife motor (M9) (SD-511)
6.11.14 Stopper solenoid (SD1) (SD-511)
6.12 Disassembly/reassembly procedure (PK-520)
6.12.1 Punch kit (PK-520)
6.13 Disassembly/reassembly procedure (SC-508)
6.13.1 DSC board/1 (for front side) (SC-508)
6.13.2 DSC board/2 (for back side) (SC-508)
6.14 Disassembly/reassembly procedure (UK-211)
6.14.1 Upgrade kit (UK-211)
6.15 Disassembly/reassembly procedure (UK-212)
6.15.1 Upgrade kit (UK-212)
6.16 Disassembly/reassembly procedure (FK-515)
6.16.1 FAX board (line 3), FAX board (line 4) (FK-515)
6.17 Disassembly/reassembly procedure (FK-514)
6.17.1 FAX Kit (Line1), FAX Kit (Line2) (FK-511)
6.17.2 FAX Kit (Line1), FAX Kit (Line2) (FK-514) (with MK-742)
6.18 Disassembly/reassembly procedure (HD-524)
6.18.1 Hard disk (B) (HDD-524)
6.19 Disassembly/reassembly procedure (CU-101)
6.19.1 Clean unit cover
6.19.2 Clean unit (CU-101)
6.19.3 Clean unit drive board (CUDB)
6.19.4 Exhaust fan/1 (FM14)
6.19.5 Exhaust fan/2 (FM15)
6.19.6 Suction fan (FM16)
6.19.7 Deodorant filter/UFP filter
6.20 Disassembly/reassembly procedure (KP-101)
6.20.1 Keypad (KP-101)
7. COMMERCIALLY AVAILABLE PARTS
7.1 Installing the key counter
7.1.1 Configuration
7.1.2 Procedure
7.2 Installing the original size sensor/2 (Option)

H. CLEANING/LUBRICATION
1. bizhub C368/C308/C258
1.1 Cleaning parts list
1.2 Lubrication parts list
1.3 Cleaning procedure
1.3.1 Image Transfer Belt Unit
1.3.2 PH window
1.3.3 Tray 1 feed roller, tray 1 pick-up roller, tray 1 separation roller
1.3.4 Tray 2 feed roller, tray 2 pick-up roller, tray 2 separation roller
1.3.5 Tray 2 transport roller
1.3.6 Manual bypass tray feed roller
1.3.7 Manual bypass tray separation roller
1.3.8 Original glass
1.3.9 Scanner rails
1.3.10 Mirrors
1.3.11 Lens
1.3.12 CCD sensor
2. Option
2.1 Cleaning parts list
2.1.1 DF-704
2.1.2 PC-110/PC-210
2.1.3 PC-410
2.1.4 LU-302
2.2 Cleaning procedure (DF-704)
2.2.1 Back side scanning glass
2.2.2 Back side scanning guide/Back side scanning shading shaft
2.3 Cleaning procedure (PC-110/PC-210)
2.3.1 Tray 3 feed roller, tray 3 pick-up roller, tray 3 separation roller
2.3.2 Tray 4 feed roller, tray 4 pick-up roller, tray 4 separation roller
2.3.3 Tray 3 vertical transport roller, tray 4 vertical transport roller
2.4 Cleaning procedure (PC-410)
2.4.1 Feed roller, Pick-up roller, Separation roller
2.4.2 Vertical transport roller
2.5 Cleaning procedure (LU-302)
2.5.1 Pick-up roller
2.5.2 Feed roller
2.5.3 Separation roller
2.5.4 Duplex transport roller

I. ADJUSTMENT/SETTING
1. How To Use The Adjustment/Setting Section
1.1 How to use the adjustment/setting section
1.2 Advance checks
2. List of utility mode
List of utility mode (outline)
(1) Starting procedure
(2) Exiting procedure
2.1 One-Touch/User Box Registration
2.2 User Settings List
2.2.1 System Settings
2.2.2 Custom Display Settings
2.2.3 Copier Settings
2.2.4 Scan/Fax Settings
2.2.5 Fax Settings
2.2.6 Printer Settings
2.2.7 Change Password
2.2.8 Change E-Mail Address
2.2.9 Register Authentication Information
2.2.10 Synchronize User Auth. and Account Track
2.3 Administrator Settings List [1/2]
Administrator settings outline 1/2
2.3.1 System Settings
2.3.2 Administrator/Machine Settings
2.3.3 One-Touch/User Box Registration
2.3.4 User Authentication/Account Track
2.3.5 Network Settings
2.3.6 Copier Settings
2.3.7 Printer Settings
2.3.8 Fax Settings
2.3.9 System Connection
2.4 Administrator Settings List [2/2]
Administrator settings outline 2/2
2.4.1 Security Settings
2.4.2 License Settings
2.4.3 Voice Guidance Settings
2.4.4 OpenAPI Certification Management Setting
2.4.5 External Memory Backup
2.4.6 Remote Access Setting
2.4.7 Eco Copier Settings
2.5 Administrator Shortcut Settings
2.5.1 Administrator Shortcut Settings [1/2]
2.5.2 Administrator Shortcut Settings [2/2]
2.6 Check Consumables List
2.6.1 Check Consumable Life [1/2]
2.6.2 Check Consumable Life [2/2]
2.7 Banner Printing
2.8 My Panel Settings
2.9 Device Information List
2.9.1 Device Information [1/2]
2.9.2 Device Information [2/2]
2.10 Remote Panel Operation List
2.11 Supplementary explanation of utility mode
2.11.1 User Authentication/Account Track-Authentication Device Settings
2.11.2 Network Settings-Network Fax Settings
2.11.3 Network Settings-Network I/F Configuration
2.11.4 Network Settings-Wireless Network Setting
2.11.5 Network Settings-IWS Settings
2.11.6 Network Settings – Remote Panel Settings (outline)
2.11.7 Network Settings – Remote Panel Settings (Server Settings)
2.11.8 Network Settings – Remote Panel Settings (Client Settings)
2.11.9 Machine Update Settings – Internet ISW Settings
2.11.10 Machine Update Settings – Machine Auto Update setting
2.11.11 Machine Update Settings – HTTP Proxy Settings
2.11.12 Security Settings – Prohibited Functions When Authentication Error
2.11.13 Security Settings – Enhanced Security Mode
2.11.14 Security Settings – HDD Encryption Setting
2.11.15 Security Settings – Debug Log Encryption Settings
2.11.16 Security Settings – Image Log Transfer Settings (Type1)
2.11.17 Security Settings – Image Log Transfer Settings (Type2)
2.11.18 Security Settings – Driver Password Encryption Setting
2.11.19 Security Settings – Quick Security Setting – Administrator Password
2.11.20 Security Settings – Quick Security Setting – Password Rules
2.11.21 Security Settings – Quick Security Setting – Quick IP Filtering
2.11.22 Security Settings – Quick Security setting – PSWC Setting
2.11.23 Security Settings – Quick Security setting – Security Warning Display Setting
2.11.24 License Settings
2.11.25 Voice Guidance Settings-Voice Guidance
2.11.26 External Memory Backup – Import/Export
2.11.27 Remote Access Setting – Import/Export User Data
3. ADJUSTMENT ITEM LIST
3.1 Replace feed roller, pick-up roller, separation roller (tray 1, tray 2)
3.2 Replace feed roller, separation roller assy (manual bypass tray)
3.3 Install LCT (Built-in)
3.4 Replace CCD unit
3.5 Replace developing unit
3.6 Replace drum unit
3.7 Replace transfer belt unit
3.8 Replace fusing unit
3.9 Replace PH unit
3.10 Replace original size detection sensor
3.11 Replace scanner motor
3.12 Replace scanner home sensor
3.13 Replace MFP board
3.14 Replace eMMC board
3.15 Replace original glass
3.16 Replace hard disk
3.17 Replace control panel unit
3.18 Replace DF control board (DF-704/DF-629)
3.19 Add key counter
3.20 Execute initialize
3.21 Add an optional device
3.22 Execute F/W update
3.23 Add fax board
3.24 Mount DF-629
3.25 Mount DF-704
3.26 Replace CIS module (when DF-704 is mounted)
4. LIST OF SERVICE MODE
4.1 List of service mode (outline)
4.2 List of service mode (detail)
4.2.1 Machine
4.2.2 Imaging Process Adjustment
4.2.3 CS Remote Care
4.2.4 System 1
4.2.5 System 2
4.2.6 Counter
4.2.7 List Output
4.2.8 State Confirmation
4.2.9 Test Mode
4.2.10 ADF
4.2.11 FAX
4.2.12 Finisher
4.2.13 Network Settings
4.2.14 Machine Update Setting
5. SERVICE MODE
5.1 Starting/Setting/Exiting
5.1.1 Starting procedure
5.1.2 Setting procedure
5.1.3 Exiting procedure
5.2 Time Zone/Date & Time Input mode
5.2.1 Use
5.2.2 Procedure
5.3 Search
5.3.1 Use
5.3.2 Procedure
5.4 Machine
5.4.1 Trail Edge Adjust
5.4.2 Fusing Temperature
5.4.3 Fusing Transport Speed
5.4.4 Heater Control Level
5.4.5 Printer Area
5.4.6 Scan Area
5.4.7 Printer Reg. Loop Adj
5.4.8 Color Registration Adjustment
5.4.9 Print Head Skew Adj
5.4.10 LD adjustment
5.4.11 Manual Bypass Tray Width Adj
5.4.12 Lead Edge Erase Adjustment
5.4.13 Non-Image Area Erase Check
5.4.14 ADF Scan Glass Contamination
5.4.15 Exhaust Fan Stop Delay
5.4.16 PPM Control Choice
5.5 Firmware Version
5.5.1 Use
5.5.2 Procedure
5.6 Imaging Process Adjustment
5.6.1 Gradation Adjust
5.6.2 Max Image Density Adj
5.6.3 TCR Level Setting
5.6.4 Image Background Adj
5.6.5 Transfer Voltage Fine Adj
5.6.6 Image Stabilization
5.6.7 Thick Paper Density Adjustment
5.6.8 Paper Separation Adjustment
5.6.9 Manual Toner Add
5.6.10 Monochrome Density Adjustment
5.6.11 Grad/Dev AC Bias V Selection
5.6.12 Removable Voltage Adjust
5.6.13 Charge AC Output fine adjustment
5.7 CS Remote Care (Outlines)
5.8 Setting up the CS Remote Care
5.8.1 Using the telephone line modem
5.8.2 Using the Fax line modem
5.8.3 Using the E-mail
5.8.4 When using a WebDAV server in http communication
5.9 Software SW setting for CS Remote Care
List of software SW for CS Remote Care
5.9.1 Input procedure
5.9.2 List of software SW for CS Remote Care
5.9.3 SW No. 01
5.9.4 SW No. 02
5.9.5 SW No. 03
5.9.6 SW No. 04
5.9.7 SW No. 05
5.9.8 SW No. 06
5.9.9 SW No. 07
5.9.10 SW No. 08
5.9.11 SW No. 09
5.9.12 SW No. 10
5.9.13 SW No. 11
5.9.14 SW No. 12
5.9.15 SW No. 14
5.9.16 SW No. 15
5.9.17 SW No. 18
5.9.18 SW No. 21
5.9.19 SW No. 22
5.9.20 SW No. 23
5.10 Setup confirmation
5.11 Calling the maintenance
5.11.1 When starting the maintenance
5.11.2 When finishing the maintenance
5.12 Calling the center from the administrator
5.13 Checking the transmission log
5.14 Detail on settings for CS Remote Care
5.14.1 Maintenance/Default Settings – System Selection
5.14.2 Maintenance/Default Settings – ID Code
5.14.3 Maintenance/Default Settings – Detail Setting
5.14.4 Maintenance/Default Settings – Server Setting (E-Mail1 or E-mail2 is selected.)
5.14.5 Maintenance/Default Settings – Server Setting (http1 or http2 is selected)
5.14.6 Product Auth. Settings
5.14.7 Import/Export Settings
5.15 System 1
5.15.1 Marketing Area
5.15.2 Tel/Fax Number
5.15.3 Serial Number
5.15.4 Sleep ON/OFF Choice Setting
5.15.5 Foolscap Size Setting
5.15.6 Original Size Detection
5.15.7 Install Date
5.15.8 Initialization-Clear All Data
5.15.9 Initialization-Clear Individual Data
5.15.10 Initialization-System Error Clear
5.15.11 Problem Unit Isolation Set
5.15.12 Post card transfer table
5.15.13 Warm-up
5.15.14 Machine State LED Setting
5.15.15 TP Level
5.15.16 Burn Prevention Settings
5.16 System 2
5.16.1 HDD
5.16.2 Image Controller Setting
5.16.3 Option Board Status
5.16.4 Consumable Life Reminder
5.16.5 Unit Change
5.16.6 Software Switch Setting
5.16.7 CCD Calibration
5.16.8 LCT (Built-in) Size Settings
5.16.9 LCT Paper Size Setting
5.16.10 Paper Reuse Box Setting
5.16.11 Line Mag Setting
5.16.12 Data Capture
5.16.13 Line Detection
5.16.14 Stamp
5.16.15 Network Fax Settings
5.16.16 RX File Change Page Name
5.16.17 ADF Settings
5.16.18 Image Stabilization Setting
5.16.19 User Paper Settings
5.16.20 Coverage Rate Screen
5.16.21 JAM Code Display Setting
5.16.22 Customize Screen
5.16.23 Install Data
5.16.24 Local Interface Kit Setting
5.16.25 CIS Image Adjustment
5.16.26 Display Eco Index
5.16.27 Internal Error. Auto Cancel
5.16.28 Acquiring Settings
5.16.29 Driver Install
5.16.30 Application Change Setting
5.16.31 Custom Pattern
5.16.32 Maintenance Mode
5.16.33 Smart Fusing Control
5.16.34 Cleaning Unit Setting
5.17 Counter
5.17.1 Common procedure
5.17.2 Life
5.17.3 Service Call
5.17.4 Section Service Call
5.17.5 Warning
5.17.6 Maintenance
5.17.7 Service Total
5.17.8 Counter of Each Mode
5.17.9 Service Call History (Data)
5.17.10 ADF Paper Pages
5.17.11 Paper Jam History
5.17.12 Fax Connection Error
5.17.13 ADF Scan Glass Contamin. Counter
5.17.14 Parts Counter (Fixed)
5.17.15 Jam
5.17.16 Section JAM
5.17.17 Instantaneous Power Failure
5.17.18 Detail code history
5.18 List Output
5.18.1 Batch list CSV output
5.18.2 Machine Management List
5.18.3 Adjustments List
5.18.4 Parameter List
5.18.5 Service Parameter
5.18.6 Protocol Trace
5.18.7 Fax Setting List
5.18.8 Fax Analysis List
5.19 State Confirmation
5.19.1 Sensor Check
5.19.2 Table Number
5.19.3 Level History 1
5.19.4 Level History 2
5.19.5 Temp. & Humidity
5.19.6 CCD Check
5.19.7 Memory/Storage Adjustment
5.19.8 Memory/Storage Status
5.19.9 Color Regist
5.19.10 Load Check
5.19.11 Adjustment Data List
5.19.12 Self-diagnostic
5.20 Test Mode
5.20.1 Procedure for test pattern output
5.20.2 Gradation Pattern
5.20.3 Halftone Pattern
5.20.4 Lattice Pattern
5.20.5 Solid Pattern
5.20.6 Color Sample
5.20.7 8 Color Solid Pattern
5.20.8 CMM pattern
5.20.9 Paper Passage Test
5.20.10 Fax Test-Signal Send Test
5.20.11 Fax Test-Signal Receive Test
5.20.12 Fax Test-NCU TEST
5.20.13 Fax Test-Dial Test
5.20.14 Fax Test – Off-hook Test
5.21 ADF
5.21.1 Original Stop Position
5.21.2 Registration Loop Adj
5.21.3 Auto Stop Position Adjustment
5.21.4 Paper Passage
5.21.5 Sensor Check
5.21.6 Original Tray Width
5.21.7 Read Pos Adj
5.21.8 Feed Zoom
5.21.9 Scanning Light Adjustment
5.21.10 Mixed original size adjustment
5.21.11 Home Read Position Adjust
5.21.12 FD-Mag. Adj. (B)
5.21.13 Main Scanning Direction Zoom
5.21.14 Skew Measurement
5.22 FAX (Line1)
FAX Setting (Line1)
5.22.1 Modem/NCU
5.22.2 Network
5.22.3 System
5.22.4 Fax File Format
5.22.5 Communication
5.22.6 List Output
5.22.7 Function Parameter
5.22.8 Initialization
5.22.9 FAX Line Std. Setting
5.23 FAX setting (Line2, Line 3, Line 4)
5.23.1 Modem/NCU
5.23.2 Network
5.23.3 Communication
5.23.4 Initialize
5.23.5 FAX Line Std. Setting
5.24 FAX setting (Address parameter list: for line 1, line 2, line 3 and line 4)
5.24.1 0b000#
5.24.2 0b001#
5.24.3 0b002#
5.24.4 0b003#
5.24.5 0b004#, 0b005#
5.24.6 0b006#
5.24.7 0e000#
5.24.8 0e001#
5.24.9 0e002#
5.24.10 0e003#
5.24.11 0e004#
5.24.12 0e005#
5.24.13 12000#
5.24.14 13000#
5.24.15 13001#, 13002#
5.24.16 13003#
5.24.17 13004#
5.24.18 13005#
5.24.19 13006#
5.24.20 13007#
5.24.21 13008#
5.24.22 98000#
5.25 FAX setting (Address parameter list: for line 1)
5.25.1 0e009#
5.25.2 0e00a#
5.25.3 0e00b#
5.25.4 0e00c#
5.25.5 0e00d#
5.25.6 0e00e#
5.25.7 0e00f#
5.25.8 0e010#
5.25.9 0e011#
5.25.10 0e012#
5.25.11 0f000#
5.25.12 0f001#
5.25.13 10000#
5.25.14 10001#
5.26 FAX setting (Address parameter list: for line 2)
5.26.1 0e01a#
5.26.2 0e01b#
5.26.3 0e01c#
5.26.4 0e01d#
5.26.5 0e01e#
5.26.6 0e01f#
5.26.7 0e020#
5.26.8 0e021#
5.26.9 0e022#
5.26.10 0e023#
5.26.11 0f002#
5.26.12 0f003#
5.26.13 10002#
5.26.14 10003#
5.27 FAX setting (Address parameter list: for line 3)
5.27.1 0e02b#
5.27.2 0e02c#
5.27.3 0e02d#
5.27.4 0e02e#
5.27.5 0e02f#
5.27.6 0e030#
5.27.7 0e031#
5.27.8 0e032#
5.27.9 0e033#
5.27.10 0e034#
5.27.11 0f004#
5.27.12 0f005#
5.27.13 10004#
5.27.14 10005#
5.28 FAX setting (Address parameter list: for line 4)
5.28.1 0e03c#
5.28.2 0e03d#
5.28.3 0e03e#
5.28.4 0e03f#
5.28.5 0e040#
5.28.6 0e041#
5.28.7 0e042#
5.28.8 0e043#
5.28.9 0e044#
5.28.10 0e045#
5.28.11 0f006#
5.28.12 0f007#
5.28.13 10006#
5.28.14 10007#
5.29 Finisher
5.29.1 FS-FN adjustment – Center Staple Position
5.29.2 FS-FN adjustment – Half-Fold Position
5.29.3 FS-FN adjustment – 1st Tri-Fold Adjustment/2nd Tri-Fold Adjustment
5.29.4 FS-FN adjustment – Punch Edge Adj
5.29.5 FS-FN adjustment – Punch Regist Loop Size
5.29.6 FS-FN adjustment – Finisher Components Test Mode
5.29.7 FS-FN adjustment – Alignment plate Position
5.29.8 FS-FN adjustment – Paper Alignment Guides W. Adj
5.29.9 Punch Option Setting
5.29.10 Max. # of Folded Sheets Setting
5.29.11 Job Separator
5.30 Network Settings
5.30.1 2nd Network Setting – 2nd network card settings
5.30.2 2nd Network Setting – Network Interface Settings
5.30.3 2nd Network Setting – SSID
5.30.4 2nd Network Setting – Authentication/Encryption Algorithm
5.30.5 2nd Network Setting – WEP Key
5.30.6 2nd Network Setting – Passphrase
5.30.7 2nd Network Setting – Wireless Channel
5.30.8 2nd Network Setting – ANY Connection
5.30.9 2nd Network Setting – Connect permission extension address list
5.30.10 2nd Network Setting – DHCP Server Setting
5.30.11 2nd Network Setting – TCP/IP Settings
5.31 Machine Update Setting
5.31.1 Internet ISW – Internet ISW Set
5.31.2 Internet ISW – HTTP Setting
5.31.3 Internet ISW – FTP Setting
5.31.4 Internet ISW – Forwarding Access Setting
5.31.5 Internet ISW – Download
5.31.6 Internet ISW – Update Start Time Settings
5.31.7 Machine Auto Update setting – Auto Update setting
5.31.8 Machine Auto Update setting – Relay server setting
5.31.9 Machine Auto Update setting – Transmission log Update
5.31.10 Machine Auto Update setting – Transmission Server Log
5.31.11 Machine Auto Update setting – Update Log Display
5.31.12 Machine Auto Update setting – Relay Server Log Confirmation
5.31.13 Machine Auto Update setting – Manual Update
5.31.14 Machine Auto Update setting – Machine Export setting
5.31.15 Machine Auto Update setting – Machine Update Password
5.31.16 Firmware Rollback
5.31.17 Copy Network Settings
6. SETUP WIZARD
6.1 Function outline
6.1.1 Setup Wizard list
6.2 Starting/Exiting
6.2.1 Starting procedure
6.2.2 Exiting procedure
7. ENHANCED SECURITY
7.1 List of Enhanced Security
7.2 Starting/Exiting
7.2.1 Starting procedure
7.2.2 Exiting procedure
7.3 Enhanced Security
7.3.1 CE Password
7.3.2 Administrator Password
7.3.3 Administrator Feature Level
7.3.4 CE Authentication
7.3.5 Life Stop Setting
7.3.6 Memory Data Backup
7.3.7 operation Ban release time
7.3.8 Administrator unlocking
7.3.9 Engine FW DipSW
7.3.10 Engine Data Backup
7.3.11 HDD Data Backup
7.3.12 TPM Setting
8. BILLING SETTING
Billing Setting
8.1 List of billing setting
8.2 Starting/Exiting
8.2.1 Starting procedure
8.2.2 Exiting procedure
8.3 BILLING SETTING
8.3.1 Counter Setting
8.3.2 Management Function Choice
8.3.3 Management Function Choice – Key Counter IF Vendor
8.3.4 Management Function Choice – Key Counter Only
8.3.5 Management Function Choice – Management Device-2
8.3.6 Management Function Choice – Vendor 2
8.3.7 Authentication Device 2
8.3.8 Setting items that automatically change the setting values
8.3.9 Coverage Rate Clear
8.3.10 License management – Activation
8.3.11 License management – Deactivation
8.3.12 License management – Repair
8.3.13 License management – Initialize
8.3.14 License management – Request Code
8.3.15 License management – List
8.3.16 License management – Function List
8.3.17 Manage OpenAPI Authentication
8.3.18 WebDAV Server Setting
8.3.19 Coverage Counter Setting
8.3.20 Print Counter Clear
8.3.21 Coverage Counter Detail
9. Debug Settings
9.1 List of debug settings
9.2 Starting/Exiting
9.2.1 Starting procedure
9.2.2 Exiting procedure
9.3 DEBUG SETTINGS
9.3.1 Debug Log Output
9.3.2 Acquiring Mode
9.3.3 TX Debug Log Settings
9.3.4 Remote Log Retrival
9.3.5 Remote Log Server Settings
9.3.6 USB Password
9.3.7 Other
9.4 Operation of the debug log function
9.4.1 Basic mode
9.4.2 Enhance mode
10. CONTENTS TO BE CLEARED BY RESET FUNCTION
11. MECHANICAL ADJUSTMENT bizhub C368/C380/C258
11.1 Scanner section
11.1.1 Adjustment of the scanner motor belt
11.2 Paper feed section
11.2.1 Centering adjustment of the tray 1/2
11.2.2 Pick-up pressure adjustment of the tray 1/2
11.2.3 Separator roller pressure adjustment of the bypass tray
11.2.4 Adjustment of the bypass CD paper size VR
11.3 Fusing section
11.3.1 Adjusting the parallelism of the fusing unit path
12. MECHANICAL ADJUSTMENT DF-629
12.1 Original document feed section
12.1.1 Adjusting the height
12.1.2 Adjusting front side skew feed on ADF
12.1.3 Adjusting the pressure of the separation roller
13. MECHANICAL ADJUSTMENT DF-704
13.1 Original document feed section
13.1.1 Adjusting the height
13.1.2 Adjusting front side skew feed on ADF
13.1.3 Adjusting back side skew feed on ADF
13.1.4 Adjusting the pressure of the separation roller
14. MECHANICAL ADJUSTMENT PC-110/PC-210
14.1 Paper reference position
14.1.1 Purpose
14.1.2 Procedure
15. MECHANICAL ADJUSTMENT PC-410
15.1 Paper reference position
15.1.1 Purpose
15.1.2 Procedure
15.2 Shifter movement timing belt adjustment
15.2.1 Procedure
16. MECHANICAL ADJUSTMENT LU-302
16.1 Paper feed section
16.1.1 Centering adjustment of the LCT
16.1.2 Pick-up roller load adjustment of the LCT
17. MECHANICAL ADJUSTMENT PK-519
17.1 Punch section
17.1.1 Punch hole deviation correction
18. MECHANICAL ADJUSTMENT PK-520
18.1 Punch section
18.1.1 Punch hole deviation correction
19. MECHANICAL ADJUSTMENT FS-534SD
19.1 Paper exit section
19.1.1 Half-fold skew adjustment
J REWRITING OF FIRMWARE
1. Confirming the firmware version
1.1 Procedure
2. USB memory
2.1 Preparation
2.1.1 System preparation
2.1.2 USB memory used to update firmware
2.2 Procedure
2.3 Action when data transfer fails
2.4 Entering the machine type information
3. Internet ISW
3.1 Preparations for firmware rewriting
3.1.1 Outline
3.1.2 Service environment
3.1.3 Preparations for firmware rewriting
3.2 Making the firmware data
3.2.1 Outline
3.2.2 Procedure
3.3 Firmware rewriting from the control panel
3.3.1 Firmware rewriting from the control panel
4. CS Remote Care
4.1 Firmware rewriting from the CS Remote Care
5. Auto Update setting
5.1 Outline
5.2 Service environment
5.3 Procedures for rewriting the firmware by using the Auto Update function
5.3.1 Preparations
5.3.2 Download the firmware data automatically from the program server
6. Firmware Distribute Server function (Relay server)
6.1 Outline
6.2 Service environment
6.3 Firmware relay procedures by using “relay server function”
6.3.1 Preparations
6.3.2 Download and open the relay data automatically from the program server
6.3.3 Download the firmware opened from the relay server by using the Auto Update function on the other MFP
7. How to install the i-Option data
7.1 Available function for i-Option
7.2 LK-107/LK-108 font data installation procedure
8. Creating back up files when updating firmware
8.1 Procedure

K. TROUBLESHOOTING
1. JAM CODE
(1) JAM display
(2) Misfeed display resetting procedure
1.1 List of the JAM code
1.2 JAM that do not display the JAM code
1.3 Sensor layout
1.3.1 bizhub C368/C308/C258
1.3.2 DF-629
1.3.3 DF-704
1.3.4 PC-110/PC-210
1.3.5 PC-410
1.3.6 LU-302
1.3.7 FS-533/PK-519
1.3.8 FS-534/PK-520/FS-534SD
1.4 Initial check items
1.5 Jam when thin or thick paper is fed
1.5.1 Paper jam for thin paper
1.5.2 Paper jam for thick paper
1.6 1#-##
1.6.1 10-01, 10-02, 10-40
1.6.2 11-01, 11-02, 11-40
1.6.3 12-01, 12-40
1.6.4 13-01, 13-40
1.6.5 14-01, 14-40
1.6.6 15-01, 15-40
1.6.7 16-01, 16-40
1.6.8 17-20
1.7 2#-##
1.7.1 20-01, 20-02
1.7.2 20-21
1.7.3 20-22
1.8 3#-##
1.8.1 30-03
1.8.2 32-01, 32-05
1.9 6#-##
1.9.1 66-01, 66-11, 66-21
1.9.2 66-02, 66-12
1.9.3 66-03, 66-13, 66-23, 66-33
1.9.4 66-04, 66-14, 66-24, 66-34
1.9.5 66-05, 66-06, 66-15
1.9.6 66-07
1.10 7#-##
1.10.1 72-14
1.10.2 72-15
1.10.3 72-16
1.10.4 72-17
1.10.5 72-18
1.10.6 72-19
1.10.7 72-21
1.10.8 72-22
1.10.9 72-23
1.10.10 72-25
1.10.11 72-26
1.10.12 72-43
1.10.13 72-70
1.10.14 72-81
1.10.15 72-85
1.10.16 72-86
1.10.17 72-87
xx
1.10.18 75-42
1.10.19 75-43
1.11 9#-##
1.11.1 92-01, 92-02, 92-40
1.11.2 93-10
1.11.3 99-01
1.11.4 99-02
1.11.5 99-03
1.11.6 99-04
1.11.7 99-05
1.11.8 99-06
1.11.9 99-07
1.11.10 99-08
1.11.11 99-09
2. MALFUNCTION CODE
2.1 Display procedure
2.2 List of the malfunction code
2.3 S-1
2.3.1 Contents
2.3.2 Procedure
2.4 S-2
2.4.1 Contents
2.4.2 Procedure
2.5 D-1
2.5.1 Contents
2.5.2 Procedure
2.6 D-3
2.6.1 Contents
2.6.2 Procedure
2.7 P-5, P-28
2.7.1 Contents
2.7.2 Procedure
2.8 P-6, P-7, P-8, P-9
2.8.1 Contents
2.8.2 Procedure
2.9 P-14
2.9.1 Contents
2.9.2 Procedure
2.10 P-21
2.10.1 Contents
2.10.2 Procedure
2.11 P-22
2.11.1 Contents
2.11.2 Procedure
2.12 P-27
2.12.1 Contents
2.12.2 Procedure
2.13 P-33
2.13.1 Contents
2.13.2 Procedure
3. TROUBLE CODE
3.1 Display procedure
3.2 Trouble resetting procedure
3.2.1 Trouble resetting procedure by Trouble Reset key
3.2.2 Trouble resetting procedure by the auto cancel function
3.2.3 Trouble resetting procedure by remote operation
3.3 Trouble isolation function
3.4 List of the trouble code
3.5 C0###
3.5.1 C0002
3.5.2 C0106
3.5.3 C0107
3.5.4 C0108
3.5.5 C0109
3.5.6 C0202
3.5.7 C0204
3.5.8 C0206
3.5.9 C0208
3.5.10 C0210
3.5.11 C0211
3.5.12 C0214
3.5.13 C0216
3.6 C1###
3.6.1 C1004
3.6.2 C1081
3.6.3 C1102
3.6.4 C1103
3.6.5 C1105
3.6.6 C1106
3.6.7 C1109
3.6.8 C1112
3.6.9 C1113
3.6.10 C1114
3.6.11 C1115
3.6.12 C1132
3.6.13 C1140
3.6.14 C1141
3.6.15 C1144
3.6.16 C1145
3.6.17 C1156
3.6.18 C1182
3.6.19 C1184
3.6.20 C1195
3.6.21 C1196
3.6.22 C1197
3.6.23 C11A1
3.6.24 C11A2
3.6.25 C11E1
3.6.26 C1402
3.7 C2###
3.7.1 C2152, C2153, C2154, C2155, C2156
3.7.2 C2253, C2254
3.7.3 C2255, C2256
3.7.4 C2355
3.7.5 C2411, C2412, C2413, C2414
3.7.6 C2551, C2553, C2555
3.7.7 C2552, C2554, C2556, C2558
3.7.8 C2557
3.7.9 C2559, C255A, C255B
3.7.10 C255C
3.7.11 C2561, C2562, C2563, C2564
3.7.12 C2650
3.7.13 C2A11, C2A12, C2A13, C2A14
3.7.14 C2A21, C2A22, C2A23, C2A24
3.8 C3###
3.8.1 C3101, C3103
3.8.2 C3201, C3202
3.8.3 C3302
3.8.4 C3425
3.8.5 C3722, C3725, C3726
3.8.6 C3731
3.8.7 C3825, C3826
3.8.8 C3922, C3925, C3926
3.8.9 C392A
3.8.10 C392B
3.9 C4###
3.9.1 C4091
3.9.2 C40A1, C40A2, C40A3, C40A4
3.9.3 C4101
3.9.4 C4501
3.10 C5###
3.10.1 C5102, C5103
3.10.2 C5351
3.10.3 C5355
3.10.4 C5360
3.10.5 C5370
3.10.6 C5501
3.10.7 C5601
3.10.8 C5603
3.10.9 C5604
3.10.10 C5605, C5606
3.10.11 C5610
3.10.12 C5611
3.11 C6###
3.11.1 C6001
3.11.2 C6002
3.11.3 C6102, C6103
3.11.4 C6104, C6105
3.11.5 C6704
3.11.6 C6751
3.11.7 C6752
3.11.8 C6753
3.11.9 C6754, C6755
3.11.10 C6756
3.11.11 C6901, C6902, C6903
3.11.12 C6911, C6912, C6913
3.11.13 C6F01, C6F02, C6F03, C6F04, C6F05, C6F07, C6F08, C6F09, C6F0A, C6FFDC, C6FDD
3.12 C8###
3.12.1 C8101
3.12.2 C8107
3.12.3 C8302
3.12.4 C8401
3.13 C9###
3.13.1 C9401, C9402
3.13.2 C9403, C9404
3.14 CA###
3.14.1 CA051, CA052, CA053
3.15 CC###
3.15.1 CC140
3.15.2 CC151, CC152
3.15.3 CC155
3.15.4 CC156
3.15.5 CC159, CC15A
3.15.6 CC15B
3.15.7 CC15C
3.15.8 CC163
3.15.9 CC164
3.15.10 CC170, CC171, CC172, CC173, CC174, CC180, CC181, CC182, CC183, CC184, CC185, CC186
3.15.11 CC190
3.15.12 CC191
3.15.13 CC211
3.15.14 CC212
3.15.15 CC213
3.15.16 CC214
3.15.17 CC216
3.16 CD###
3.16.1 CD002
3.16.2 CD004, CD00F, CD020
3.16.3 CD010
3.16.4 CD011
3.16.5 CD012
3.16.6 CD013, CD014
3.16.7 CD015
3.16.8 CD016
3.16.9 CD017
3.16.10 CD030
3.16.11 CD041, CD042, CD043, CD044, CD045, CD046
3.16.12 CD047, CD048, CD049, CD04A, CD04B
3.16.13 CD050
3.16.14 CD110
3.16.15 CD201, CD202, CD203
3.16.16 CD211, CD212
3.16.17 CD241, CD242
3.16.18 CD252
3.16.19 CD261
3.16.20 CD262
3.16.21 CD271
3.16.22 CD272
3.16.23 CD390
3.16.24 CD391
3.16.25 CD392
3.16.26 CD3A0
3.16.27 CD401, CD402, CD403, CD404, CD405, CD406, CD407, CD411, CD412, CD413
3.16.28 CD601, CD602, CD603
3.16.29 CD701, CD702, CD703
3.16.30 CD704
3.16.31 CD705, CD706
3.16.32 CDC##
3.16.33 CDF50, CDF70, CDFA0
3.16.34 CDF51, CDF71, CDFA1
3.17 CE###
3.17.1 CE001, CE003, CE004, CE005, CE006, CE007
3.17.2 CE002
3.17.3 CE101
3.17.4 CE201
3.17.5 CE301, CE302, CE303, CE304, CE305
3.17.6 CED01
3.17.7 CEEE1, CEEE3
3.17.8 CEEE2
4. ABORT CODE
4.1 Troubleshooting of the abort code
4.1.1 Contents
4.1.2 Procedure
4.2 CF0##
4.3 CF1##
4.4 CF2##
4.5 CF3##
4.6 CF4##
4.7 CF5##
4.8 CF6##
4.9 CF7##
4.10 CF8##
4.11 CF9##
4.12 CFA##
4.13 CFB##
4.13.1 CFB0#
4.13.2 CFB1#
4.13.3 CFB2#
4.13.4 CFB3#
4.13.5 CFB4#
4.13.6 CFB5#
4.13.7 CFB6#
4.13.8 CFB7#
4.13.9 CFB8#
4.13.10 CFB9#
4.13.11 CFBA#
4.13.12 CFBB#
4.13.13 CFBC#
4.13.14 CFBD#
4.13.15 CFBE#
4.13.16 CFBF#
4.14 CFC##
4.14.1 CFC0#
4.14.2 CFC1#
4.14.3 CFC2#
4.14.4 CFC3#
4.14.5 CFC4#
4.14.6 CFC5#
4.14.7 CFC6#
4.14.8 CFC7#
4.14.9 CFC8#
4.14.10 CFC9#
4.14.11 CFCA#
4.14.12 CFCB#
4.14.13 CFCC#
4.14.14 CFCD#
4.14.15 CFCE#
4.14.16 CFCF#
4.15 CFD##
4.15.1 CFD0#
4.15.2 CFD1#
4.15.3 CFD2#
4.15.4 CFD3#
4.15.5 CFD4#
4.15.6 CFD5#
4.15.7 CFD6#
4.15.8 CFD7#
4.15.9 CFD8#
4.15.10 CFD9#
4.15.11 CFDA#
4.15.12 CFDB#
4.15.13 CFDC#
4.15.14 CFDD#
4.15.15 CFDE#
4.15.16 CFDF#
4.16 CFE##
4.16.1 CFE0#
4.16.2 CFE1#
4.16.3 CFE2#
4.16.4 CFE3#
4.16.5 CFE4#
4.16.6 CFE5#
4.16.7 CFE6#
4.16.8 CFE7#
4.16.9 CFE8#
4.16.10 CFE9#
4.16.11 CFEA#
4.16.12 CFEB#
4.16.13 CFEC#
4.16.14 CFED#
4.16.15 CFEE#
4.16.16 CFEF#
4.17 CFF##
4.17.1 CFF0#
4.17.2 CFF1#
4.17.3 CFF2#
4.17.4 CFF3#
4.17.5 CFF4#
4.17.6 CFF5#
4.17.7 CFF6#
4.17.8 CFF7#
4.17.9 CFF8#
4.17.10 CFF9#
4.17.11 CFFA#
4.17.12 CFFB#
4.17.13 CFFC#
4.17.14 CFFD#
4.17.15 CFFE#
5. ERROR CODE FOR THE INTERNET ISW
5.1 Error code list for the Internet ISW
5.2 0x0#
5.3 0x1#
5.4 0x2#
6. CS Remote Care ERROR CODE
6.1 Troubleshooting for CS Remote Care
6.2 CS Remote Care Operation under Enhanced Security Mode
6.3 List of the CS Remote Care error code
6.3.1 When connecting by modem
6.3.2 When connecting by e-mails
6.3.3 When connecting by http
6.3.4 When connecting by Fax modem
7. NETWORK ERROR CODE
7.1 Display procedure
7.1.1 IEEE802.1X, E-Mail/Internet Fax, WebDAV client
7.1.2 Other network error
7.2 IEEE802.1X
7.3 LDAP
7.4 E-Mail/Internet Fax
7.5 FTP transmission
7.6 SMB transmission
7.7 SMTP transmission
7.8 WebDAV transmission
7.9 SMB browsing
7.10 User authentication
7.11 WebDAV client/Remote panel (Response reception)
7.12 WebDAV client/Remote panel (Request sending)
7.13 WSD scan
7.14 Bluetooth
7.15 GSS-API
7.16 Scan server transmission
7.17 Wireless LAN (WPS)
7.18 Cloud connection
8. FAX TROUBLE CODE
The error in the transmission/reception system
8.1 B0##
8.2 B11#
8.3 B12#
8.4 B13#
8.5 B14#
8.6 B15#
8.7 B16#
8.8 B17#
8.9 B18#
8.10 B19#
8.11 T0#
8.12 T1#
8.13 T2#
8.14 T3#
8.15 T4#
8.16 T5#
8.17 T6#
8.18 T7#
8.19 T8#
8.20 T9#
8.21 R0#
8.22 R1#
8.23 R2#
8.24 R3#
8.25 R4#
8.26 R5#
8.27 R6#
8.28 R7#
8.29 R8#
8.30 R9#
8.31 Other
9. DIAGNOSTIC CODES
9.1 Outline
9.2 Explanation
9.2.1 The diagnostic code
9.2.2 Information of communication results and conditions
10. NETWORK FAX ERROR CODE
10.1 Error code list of the transmission system
10.2 Error code list of the reception system
11. Open API RELATED TROUBLE
11.1 Outline
11.2 Types of Trouble
11.3 Solution
11.3.1 When using an application
11.3.2 After rewriting the firmware of the machine
12. TROUBLES THAT DO NOT DISPLAY THE TROUBLE CODE
12.1 Machine is not energized at all (DCPU operation check)
12.1.1 Contents
12.1.2 Procedure
12.2 Fusing heaters do not operate
12.2.1 Contents
12.2.2 Procedure
12.3 Power is not supplied to option
12.3.1 DF-704/DF-629
12.3.2 PC-110/PC-210/PC-410
12.3.3 FS-533/FS-534
13. OTHER TROUBLE
13.1 Firmware error warning
13.1.1 Action
13.2 HDD lock password error warning
13.2.1 Detection timing
13.2.2 Action
14. TROUBLESHOOTING OF i-Option
14.1 Structure of license management
14.2 License management information
14.3 Error message
14.3.1 License management error
15. IMAGE QUALITY PROBLEM
15.1 How to read element data
15.1.1 Table Number
15.1.2 Level History 1
15.1.3 Level History 2
15.2 Troubleshooting procedure overview
15.2.1 Test pattern printing
15.2.2 Self-diagnostic function
15.3 Corrective action procedure
15.3.1 Image trouble sample illustrations
15.3.2 White line 1, White band 1, Color line 1, Color band 1
15.3.3 White line 2, White band 2, Color line 2, Color band 2
15.3.4 Uneven density 1
15.3.5 Uneven density 2
15.3.6 Faint image, low image density (ID lowering)
15.3.7 Gradation reproduction failure
15.3.8 Color reproducibility error
15.3.9 Incorrect color image registration
15.3.10 Foggy background
15.3.11 Void areas, White spots
15.3.12 Color spot
15.3.13 Blurred image
15.3.14 Back marking
15.3.15 Blank copy, Black copy
15.3.16 Uneven pitch
15.3.17 Uneven gloss, rough gloss
15.3.18 Poor fusing performance, Offset
15.3.19 Brush effect, Image bleeding
15.3.20 Blurred fine lines
15.3.21 Moire
15.3.22 Skewed image
15.3.23 Distorted image
15.3.24 ACS malfunction
15.3.25 Abnormal image
16. IC PROTECTOR
16.1 Outline
16.2 IC protector list
16.2.1 bizhub C368/C308/C258
16.2.2 PC-410
16.2.3 JS-506
16.2.4 FS-534/FS-534SD
16.2.5 FS-533
16.2.6 PK-519

L. PARTS/CONNECTOR LAYOUT DRAWING
1. PARTS LAYOUT DRAWING
1.1 Bizhub C368/C308/C258
1.1.1 Scanner section
1.1.2 Front side
1.1.3 Back side
1.1.4 Left side
1.1.5 Right side
1.1.6 Manual bypass tray
1.1.7 Tray 1
1.1.8 Tray 2
1.1.9 Fusing/paper exit section
1.1.10 Duplex section
1.2 DF-704/SP-501 (Option)
1.3 DF-629/SP-501 (option)
1.4 PC-110/PC-210 (Option)
1.4.1 Board/switch/sensor/others
1.4.2 Load
1.5 PC-410 (Option)
1.5.1 Board/switch/sensor/others
1.5.2 Load
1.6 LU-302 (Option)
1.7 JS-506 (Option)
1.8 FS-534 (Option)
1.9 PK-520 (Option)
1.10 SD-511 (Option)
1.11 FS-533 (Option)
1.12 PK-519 (Option)
1.13 CU-101 (Option)
2. CONNECTOR LAYOUT DRAWING
2.1 BOARD CONNECTOR LAYOUT DRAWING
2.1.1 bizhub C368/C308/C258
2.1.2 DF control board (DFCB)
2.1.3 Dual scan image processing board (DSIPB)
2.1.4 CIS power supply (CISPU)
2.1.5 PC control board (PCCB)
2.1.6 LU drive board (LUDB)
2.1.7 JS control board (JSCB)
2.1.8 FS control board (FSCB)
2.1.9 SD drive board (SDDB)
2.1.10 Stapler relay board (STREYB)
2.1.11 PK control board (PKCB)
2.1.12 Clean unit drive board (CUDB)
2.1.13 FAX board (FAXB)
2.2 RELAY CONNECTOR LAYOUT DRAWING
2.2.1 bizhub C368/C308/C258

M. TIMING CHART
1. bizhub C368/C308/C258
1.1 Timing chart when the main power switch is turned ON
2. FS-534/SD-511
2.1 Shift mode
2.1.1 Operating conditions
2.1.2 Timing chart
2.2 Center staples mode
2.2.1 Operating conditions
2.2.2 Timing chart

N. WIRING DIAGRAM
1. bizhub C368/C308/C258
1.1 Main body
2. Option
2.1 DF-629
2.1.1 DF-629
2.2 DF-704
2.2.1 DF-704
2.3 PC-110
2.3.1 PC-110
2.4 PC-210
2.4.1 PC-210
2.5 PC-410
2.5.1 PC-410
2.6 LU-302
2.6.1 LU-302
2.7 FS-533
2.7.1 FS-533
2.8 FS-534
2.9 FS-534SD
2.10 JS-506
2.10.1 JS-506

O. THEORY OF OPERATION C368/C308/C258
1. INTERFACE SECTION
1.1 Configuration
1.1.1 Front side
1.1.2 Right side
1.1.3 Rear side
2. SCANNER SECTION
2.1 Configuration
2.2 Drive
2.3 Operation
2.3.1 LED exposure unit
2.3.2 When the power is ON
2.3.3 Control when the Start key is pressed
2.3.4 Original scanning area
2.3.5 Original size detection control
2.3.6 Image processing
3. WRITE SECTION (PH SECTION)
3.1 Configuration
3.2 Operation
3.2.1 Outline
3.2.2 Laser exposure process
3.2.3 Laser emission timing
3.2.4 Laser emission stop
3.2.5 Laser emission area
3.2.6 Color registration control (color shift correction) system
3.2.7 Color skew correction control
3.2.8 Skew adjustment/skew adjustment reset
3.2.9 PH unit temperature detection control
3.2.10 PH window cleaning
3.2.11 Image processing
4. PHOTO CONDUCTOR SECTION
4.1 Configuration
4.2 Drive
4.3 Operation
4.3.1 Photo conductor drive mechanism
4.3.2 Erase LED control
4.3.3 Photo conductor cleaning
4.3.4 Electrostatic charger control
4.3.5 Charging roller cleaning
4.3.6 Drum unit detection
4.3.7 Drum unit life detection
4.3.8 Number of field standard printed pages
5. DEVELOPING SECTION
5.1 Configuration
5.2 Drive
5.2.1 Developing section/K drive mechanism
5.2.2 Developing section/Y, M, C drive mechanism
5.3 Operation
5.3.1 Developing unit pressure/releases mechanism
5.3.2 Developer flow
5.3.3 Auto refining developing system
5.3.4 Developing bias
5.3.5 Toner scattering prevention
5.3.6 Developing cooling
5.3.7 Toner density control
5.3.8 Developing unit detection
5.3.9 Developing unit life detection
5.3.10 Number of field standard printed pages
6. TONER SUPPLY SECTION
6.1 Configuration
6.2 Drive
6.2.1 Toner cartridge drive
6.2.2 Toner hopper drive
6.3 Operation
6.3.1 Toner replenishing overview
6.3.2 Toner replenishing from toner bottle to toner hopper
6.3.3 Toner replenishing from toner hopper to developing unit
6.3.4 Auxiliary toner replenishing control for toner hopper
6.3.5 Auxiliary toner replenishing control for developing unit
6.3.6 Toner spillage prevention shutter
6.3.7 Toner cartridge cooling mechanism
6.3.8 Front door mechanism
6.3.9 Life control
7. 1ST TRANSFER SECTION
7.1 Configuration
7.2 Drive
7.3 Operation
7.3.1 Transfer belt drive
7.3.2 1st transfer roller control
7.3.3 Pressure/retraction control by print mode
7.3.4 1st transfer control
7.3.5 Transfer belt cleaning
7.3.6 Waste toner spillage prevention shutter
7.3.7 Transfer belt cooling
7.3.8 Cleaning blade foreign matter removal control
7.3.9 Transfer belt new article detection
7.3.10 Transfer belt life detection
8. 2ND TRANSFER SECTION
8.1 Configuration
8.2 Drive
8.3 Operation
8.3.1 2nd transfer control
8.3.2 Control of toner application to 2nd transfer roller
8.3.3 2nd transfer roller cleaning
8.3.4 Charge neutralization and separation of paper
8.3.5 Paper winding prevention guide
8.3.6 IDC sensor protection
8.3.7 2nd transfer roller new article detection
8.3.8 2nd transfer roller life detection
9. TONER COLLECTING SECTION
9.1 Configuration
9.2 Drive
9.3 Operation
9.3.1 Waste toner box drive mechanism
9.3.2 Control of waste toner conveyance through waste toner box
9.3.3 Waste toner box-in-position detection
9.3.4 Waste toner box full detection
9.3.5 Waste toner box new article detection
9.3.6 Waste toner spillage prevention shutter
10. PAPER FEED SECTION (MANUAL BYPASS TRAY)
10.1 Configuration
10.2 Drive
10.3 Operation
10.3.1 Up/down control
10.3.2 Paper feed control
10.3.3 Paper size detection control
10.3.4 Paper empty detection control
10.3.5 Paper separation pressure switching mechanism
11. PAPER FEED SECTION
11.1 Configuration
11.1.1 Tray 1
11.1.2 Tray 2
11.2 Drive
11.2.1 Drive
11.2.2 Layout of sensors and rollers
11.3 Operation
11.3.1 Up/down control
11.3.2 Paper feed control
11.3.3 Paper pick-up pressure switching mechanism
11.3.4 Paper size detection control
11.3.5 Remaining paper detection control
11.3.6 Paper feed tray locking mechanism
11.3.7 Roller retract mechanism
11.3.8 Paper tray stopper release mechanism
11.3.9 Dehumidifier mechanism (PC-110/PC-210/PC-410/DK-510/ HT-509/MK-719)
12. VERTICAL TRANSPORT SECTION
12.1 Configuration
12.2 Drive
12.3 Operation
12.3.1 Vertical transport control
12.3.2 Transport clutch control
12.3.3 Operation timing
12.3.4 Right door mechanism
13. REGISTRATION SECTION
13.1 Configuration
13.2 Drive
13.3 Operation
13.3.1 Registration control
14. FUSING SECTION
14.1 Configuration
14.2 Drive
14.2.1 Fusing section roller drive
14.2.2 Pressure roller pressure drive
14.3 Operation
14.3.1 Fusing drive release mechanism
14.3.2 Fusing speed correction
14.3.3 Fusing pressure/retraction control
14.3.4 Paper transport control
14.3.5 Paper separation mechanism
14.3.6 Fusing temperature control
14.3.7 Plain paper fusing temperature control
14.3.8 Smart Fusing Control
14.3.9 Protection from abnormal temperatures
14.3.10 Fusing PPM control
14.3.11 Fusing unit new article detection
14.3.12 Fusing unit life detection
14.3.13 Fusing cooling control
15. PAPER EXIT/REVERSE SECTION
15.1 Configuration
15.2 Drive
15.3 Operation
15.3.1 Transport control
15.3.2 Exit paper cooling mechanism
15.3.3 Air filtering system
16. DUPLEX SECTION
16.1 Configuration
16.2 Drive
16.3 Operation
16.3.1 Paper transport control
16.3.2 Duplex circulation control
17. IMAGE STABILIZATION CONTROL
17.1 Overview
17.2 Description of control
17.2.1 IDC sensor adjustment control
17.2.2 Max. density adjustment control
17.2.3 LD intensity adjustment control
17.2.4 Color registration control (color shift correction)
17.2.5 Gamma correction control
17.3 Control contents
17.3.1 Image stabilization type (mode)
17.3.2 Control sequence by mode
17.4 Operation timing
17.4.1 Predrive operation
17.4.2 During a print cycle
17.4.3 Service Mode
17.4.4 Expert Adjustment
17.4.5 Stabilization time
18. IMAGE PROCESSING
18.1 Scanner section image processing block diagram
18.1.1 Image processing block diagram
18.1.2 Detail
18.2 Write section image processing block diagram
18.2.1 Image processing block diagram
18.2.2 Detail
19. POWER SUPPLY SECTION
19.1 Main power switch
19.2 Power key
19.2.1 Configuration
19.2.2 Operation
19.3 Power cables
19.3.1 Configuration
19.3.2 Operation
20. FAN CONTROL
20.1 Configuration
20.1.1 Front view
20.1.2 Rear view
20.2 Function
20.3 Control
21. COUNTER CONTROL
21.1 Configuration
21.2 Operation
22. INDICATOR FUNCTION
22.1 Configuration
22.1.1 Control panel section
22.1.2 Front side section
22.2 Control
22.2.1 Power key and Start key indicator section
22.2.2 Warning status indicator section
22.2.3 Operation status indicator section
22.2.4 Data indicator section
22.2.5 Remaining paper level display section

PA: THEORY OF OPERATION DF-629
1. CONFIGURATION
1.1 Section configuration
1.2 Paper path
1.2.1 1-sided paper path
1.2.2 2-sided paper path
1.3 Main part configuration
1.3.1 Main electrical part
1.3.2 Sensor
1.3.3 Roller placement
2. DRIVE
2.1 Paper feed drive
2.2 Registration drive
2.3 Document reading drive
2.4 Document reading glass cleaning drive
3. OPERATION
3.1 Document feed section
3.1.1 Document set/empty detection
3.1.2 Document size detection mechanism
3.1.3 Pick-up roller up/down control
3.1.4 Document feed/separation control
3.1.5 Document separation roller pressure switching mechanism
3.2 Document registration section
3.2.1 Document registration outline
3.2.2 Document registration loop formation process
3.3 Document reading section
3.3.1 Transport mechanism
3.3.2 Document reading glass cleaning mechanism
3.3.3 Document reading roll pressure/release control
3.3.4 Document reading front guide
3.4 Document switchback/exit section
3.4.1 Document switchback/exit mechanism
3.4.2 Switching mechanism for document switchback/exit
3.4.3 Switchback exit roll pressure/retraction control
3.4.4 Faxed document stamp function
3.5 Paper path operation
3.5.1 1-sided mode
3.5.2 2-sided mode
3.6 DF open/close detection mechanism
3.6.1 Document exchange detection control
3.6.2 DF open/close detection
3.7 Cooling inside the unit mechanism
3.8 DF Skew(Front) adjustment mechanism
3.8.1 Hinge on the right side of the machine (front)
3.8.2 Hinge on the right side of the machine (rear)
3.8.3 Adjustment direction conceptual drawing

PB: THEORY OF OPERATION DF-704
1. CONFIGURATION
1.1 Section configuration
1.2 Paper path
1.3 Main part configuration
1.3.1 Main electrical part
1.3.2 Sensor
1.3.3 Roller placement
2. DRIVE
2.1 Paper feed drive
2.2 Registration drive
2.3 Document reading drive
2.4 Document reading glass / CIS glass cleaning drive
3. OPERATION
3.1 Document feed section
3.1.1 Document set/empty detection
3.1.2 Document size detection mechanism
3.1.3 Pick-up roller up/down control
3.1.4 Document feed/separation control
3.1.5 Document separation roller pressure switching mechanism
3.2 Document registration section
3.2.1 Document registration outline
3.2.2 Document registration loop formation process
3.3 1-sided document reading section
3.3.1 Document reading section
3.3.2 Document reading roll pressure/release control
3.3.3 Document reading front guide
3.3.4 Document reading glass cleaning mechanism
3.4 2-sided document reading section
3.4.1 CIS original reading mechanism
3.4.2 CIS control when power is turned ON
3.4.3 CIS control when the document is loaded
3.4.4 CIS control when the start key is pressed
3.4.5 CIS glass contamination prevention control
3.4.6 CIS cover
3.5 Docuemnt exit section
3.5.1 Document exit mechanism
3.5.2 Faxed document stamp function
3.6 Paper path operation
3.7 DF open/close detection mechanism
3.7.1 Document exchange detection control
3.7.2 DF open/close detection
3.8 Cooling inside the unit mechanism
3.9 DF skew adjustment mechanism
3.9.1 DF Skew(Front) adjustment mechanism
3.9.2 DF Skew(Back) adjustment mechanism

PC: THEORY OF OPERATION PC-110/PC-210
1. CONFIGURATION
2. PAPER PATH
3. DRIVE
4. OPERATION
4.1 Paper feed section
4.1.1 Paper feed drive mechanism
4.1.2 Roller retract mechanism
4.1.3 Paper lifting motion
4.2 Paper feed tray section
4.2.1 Paper size detection
4.2.2 Paper feed tray locking mechanism
4.2.3 Remaining paper display mechanism
4.3 Dehumidifier mechanism (HT-509/MK-734)
4.3.1 Configuration
4.3.2 Function
4.3.3 Control

PD: THEORY OF OPERATION PC-410
1. CONFIGURATION
2. PAPER PATH
3. DRIVE
4. OPERATION
4.1 Paper feed section
4.1.1 Paper feed drive mechanism
4.1.2 Roller retract mechanism
4.2 Main tray section
4.2.1 Main tray up / down mechanism
4.2.2 Main tray lower limit detection
4.3 Sub tray section
4.3.1 Shifter drive mechanism
4.3.2 Sub tray paper remaining amount
4.4 Remaining paper amount displayed mechanism
4.4.1 Display state
4.5 Dehumidifier mechanism (HT-509/MK-719)
4.5.1 Configuration
4.5.2 Function
4.5.3 Control

PE: THEORY OF OPERATION LU-302
1. CONFIGURATION
1.1 Section configuration
1.2 Paper path
1.3 Main part configuration
1.3.1 Appearance
1.3.2 Main part
1.3.3 Electrical part
2. DRIVE
2.1 Paper feed and transport drive
2.2 Paper lift-up drive
3. OPERATION
3.1 Unit open/close section
3.1.1 Unit lock mechanism
3.1.2 LU door open/close detection mechanism
3.2 Paper storage section
3.2.1 Paper tray lifting mechanism
3.2.2 Paper tray lift-up drive release mechanism
3.2.3 Paper size detection
3.3 Paper feed/transport section
3.3.1 Paper feed and transport control
3.3.2 Remaining paper level detection
3.3.3 Paper empty detection
3.3.4 Remaining paper display
3.4 Dehumidifier heater section
3.4.1 Dehumidifier mechanism (TK-101/MK-719)

PF: THEORY OF OPERATION JS-506
1. OVERVIEW OF THE SEPARATOR
2. PAPER PATH
2.1 Paper feed to the exit tray
3. CONFIGURATION
3.1 Section configuration
3.2 Main electrical part configuration
4. DRIVE
4.1 Paper transport drive mechanism for exit tray 1
4.2 Paper transport drive mechanism for exit tray 2
4.3 Exit tray 2 shift mechanism
5. OPERATION
5.1 Exit tray 1
5.1.1 Paper transport
5.1.2 Paper full detection
5.2 Exit tray 2
5.2.1 Paper transport
5.2.2 Paper shift mechanism
5.2.3 Paper full detection

PG: THEORY OF OPERATION FS-533/PK-519
1. FINISHER OUTLINE
2. PAPER PATH
2.1 Sort offset mode/Group offset mode/Staple mode/Punch mode
2.2 Non sort mode/Non group mode/Non staple mode/Sort mode/Group mode/Punch mode
3. CONFIGURATION
3.1 Section configuration
3.1.1 Exterior view
3.1.2 Section configuration
3.2 Electrical part configuration
3.3 Main mechanical part configuration
3.4 Main roller configuration
4. UNIT OPEN/CLOSE SECTION
4.1 Unit lock mechanism
4.1.1 Finisher unit lock mechanism
4.1.2 Punch unit lock mechanism (PK-519)
5. PUNCH SECTION (PK-519)
5.1 Configuration
5.1.1 Punch kit type
5.2 Drive
5.3 Operation
5.3.1 Skew correction mechanism
5.3.2 Punch control
5.3.3 Punch holes switch control
5.3.4 Punch dust full detection control
6. TRANSPORT SECTION
6.1 Configuration
6.2 Drive
6.2.1 Drive outline
6.2.2 Paper conveyance/receiving roller section drive
6.2.3 Paper exit roller section drive
6.3 Operation
6.3.1 Paper conveyance/receiving roller section paper transport control
6.3.2 Paper exit roller section paper transport control
6.3.3 Paper exit roller up/down control
6.3.4 Paper exit roller/lower drive connecting control
7. ALIGNMENT SECTION
7.1 Configuration
7.2 Drive
7.2.1 Drive outline
7.2.2 Alignment roller section
7.2.3 Alignment tray section
7.3 Operation
7.3.1 Paper alignment overview
7.3.2 Paper alignment control (paper FD alignment)
7.3.3 Paper alignment control (paper CD alignment)
7.3.4 Alignment tray paper detect control
8. STAPLER SECTION
8.1 Configuration/Drive
8.1.1 Stapler drive section top view
8.2 Operation
8.2.1 Stapler positioning control
8.2.2 Stapling control
8.2.3 Staple empty detection control
8.2.4 Clogged staple detection control
9. RECEIVING SECTION
9.1 Configuration
9.2 Drive
9.2.1 Drive outline
9.2.2 Tray lift up section
9.2.3 Paper level detect section
9.2.4 Paper exit roller section
9.3 Operation
9.3.1 Paper exit paddle control
9.3.2 Paper exit tray lift up control
9.3.3 Paper level detect control

PH: THEORY OF OPERATION FS-534/FS-534SD/RU-513/PK-520
1. FINISHER OUTLINE
2. PAPER PATH
2.1 Sub tray
2.2 Main tray
2.3 Saddle tray
2.4 3rd tray
3. CONFIGURATION
3.1 Section configuration
3.1.1 Exterior view
3.1.2 Section configuration
3.2 Main electrical part configuration
3.2.1 Control board, motor
3.2.2 Sensor
3.3 Main mechanical part configuration
3.3.1 Overall configuration
3.3.2 RU section (horizontal transport section)
3.3.3 Paper feed/transport section, Alignment section, Tray section
3.3.4 Punch section, Staple section, Exit section
3.3.5 Saddle section
3.4 Main roller configuration
4. FNS SECTION
4.1 Door open/close detection mechanism
4.1.1 Front door open/close detection mechanism
4.1.2 Upper door open/close detection mechanism
5. RU SECTION (RU-513)
5.1 Configuration
5.2 Drive
5.3 Operation
5.3.1 Paper transport control
5.3.2 RU section door open/close detection mechanism
5.3.3 3rd exit tray full detection mechanism
6. PUNCH SECTION (PK-520)
6.1 Configuration
6.1.1 Punch kit type
6.2 Drive
6.3 Operation
6.3.1 Skew correction mechanism
6.3.2 Puncher up/down status detection configuration
6.3.3 Punch operation noise suppression
6.3.4 Punch dust box full detection mechanism
7. TRANSPORT SECTION
7.1 Configuration
7.1.1 Paper path
7.1.2 Paper feed section – sub tray section
7.1.3 Paper feed section – main tray section
7.1.4 Main tray section – saddle section
7.2 Drive
7.2.1 FNS entry transport motor
7.2.2 FNS discharge motor
7.2.3 Receiving roller retraction motor
7.3 Operation
7.3.1 Paper path switching mechanism
7.3.2 Sub tray exit mechanism
7.3.3 Receiving roller section up/down function
7.3.4 Buffer control
8. ALIGNMENT SECTION
8.1 Configuration
8.1.1 Upper paddle section
8.1.2 Exit section
8.1.3 Stopper section (FD alignment section)
8.1.4 Alignment tray section (CD alignment section)
8.2 Drive
8.2.1 Drive outline
8.2.2 Upper paddle section
8.2.3 Exit section
8.2.4 Stopper section
8.2.5 Alignment tray section
8.3 Operation
8.3.1 Paper transport control in alignment section
9. STAPLER SECTION
9.1 Configuration/Drive
9.1.1 Configuration
9.1.2 Drive
9.2 Operation
9.2.1 Stapler positioning control
9.2.2 Stapling control
9.2.3 Staple empty detection control
9.2.4 Clogged staple detection control
10. RECEIVING SECTION
10.1 Configuration
10.1.1 Configuration outline
10.1.2 Main tray
10.1.3 Sub tray
10.1.4 3rd tray
10.1.5 Saddle tray (FS-534SD only)
10.2 Drive
10.2.1 Main tray section
10.2.2 Sub tray section
10.2.3 3re tray section
10.2.4 Saddle tray section
10.3 Operation
10.3.1 Sub tray exit mechanism
10.3.2 Main tray paper level detection control
10.3.3 Main tray upper detection mechanism
10.3.4 Tray full detection mechanism
11. SADDLE SECTION (FS-534SD ONLY)
11.1 Configuration
11.2 Transport section
11.2.1 Drive
11.2.2 Paper transport
11.2.3 Curl cover
11.3 Alignment section
11.3.1 Drive
11.3.2 Alignment
11.3.3 Stopper guide
11.4 Stapler
11.4.1 Drive
11.4.2 Operation
11.5 Folding/Saddle stitching
11.5.1 Drive
11.5.2 Folding knife
11.6 Tri-folding
11.6.1 Drive
11.6.2 Tri-folding operation
11.7 Exit section
11.7.1 Drive
11.7.2 Paper exit

PI: THEORY OF OPERATION AU-102/AU-201S
1. AU-102
1.1 Configuration
1.2 Operation
2. AU-201S
2.1 Configuration
2.2 Operation
2.3 Specifications

PJ: THEORY OF OPERATION EK-608/EK-609/SC-508
1. EK-608
1.1 Configuration
1.2 Operation
2. EK-609
2.1 Configuration
2.2 Operation
3. SC-508
3.1 Configuration
3.2 Operation

PK: THEORY OF OPERATION UK-212
1. CONFIGURATION
1.1 Mounting position
2. OPERATION
2.1 Outline
2.2 2nd network interface structure
2.2.1 Wired Only
2.2.2 Wireless Only
2.2.3 Wired+Wireless (Secondary Mode)
2.2.4 Wired+Wireless (Primary Mode)
2.2.5 Wired+Wireless (Wi-Fi Direct)
2.3 Operation on ErP Auto Power Off mode
2.3.1 Wired + Wireless (Secondary Mode)
2.3.2 Wired + Wireless (Primary Mode), Wired + Wireless (Wi-Fi Direct)
2.3.3 Setting for printer driver

PL: THEORY OF OPERATION FK-514/FK-515/MK-742
1. COMMUNICATION CONTROL
1.1 FIF bits of DIS, DTC and DCS
1.1.1 FIF data configuration list (DIS/DTC)
1.1.2 FIF data configuration list (DCS)
1.2 Modem fallback sequence
1.2.1 V17, V29, and V27 ter
1.2.2 V34 fallback
1.3 V8/V34 sequence
1.3.1 V34
1.3.2 Sample of a signal procedure at sending two pages
1.3.3 Procedure details
1.3.4 Common signal bit definition
1.3.5 Phase 2 (Probing)
1.3.6 Phase 3
1.3.7 Re-synchronization procedure / Startup procedure
1.3.8 Other
2. FUNCTION
2.1 Telephone function
2.1.1 TEL/FAX switching
2.2 F-code
2.2.1 Signal format
2.2.2 F-code confidential transmission
2.2.3 F-code bulletin board polling
2.2.4 F-code relay transmission
2.3 Transmission function
2.3.1 Original scan mode
2.4 Reception function
2.4.1 Reduction / division of reception
2.4.2 Cassette / paper selection
2.4.3 Compulsory memory reception
2.4.4 Closed reception (Junk FAX)

PM: THEORY OF OPERATION HD-524
1. CONFIGURATION
1.1 Outline
1.1.1 About RAID 1
1.2 Unit configuration
2. OPERATION
2.1 HDD master/slave automatic switching control
2.2 HDD failure detection control
2.2.1 A master drive error has occurred (CD013)
2.2.2 A slave drive error has occurred (CD014)
2.2.3 A master-slave drive error has occurred (CD015)
2.2.4 A master drive error has occurred during the HDD mirroring rebuilding (CD016)
2.2.5 A slave drive error occurred during the HDD mirroring rebuilding (CD017)
2.3 HDD mirroring rebuild
2.3.1 Example: When HDD (B) is installed and rebuilding is executed
2.3.2 Example: When an HDD (A) R/W error occurs and HDD is replaced
2.4 Format HDD

PN: THEORY OF OPERATION CU-101/MK-745
1. CONFIGURATION
2. OPERATION
2.1 Exhaust control
2.2 Filter configuration
2.3 Airflow
2.4 Operation timing

S. LAYOUT DRAWINGS FOR RELATED PARTS BY EACH TROUBLE CODE
1. C0002
2. C0106
2.1 PC-110/PC-210
2.2 PC-410
3. C0107
3.1 PC-110/PC-210
3.2 PC-410
4. C0108
5. C0109
6. C0202
7. C0204
8. C0206
9. C0208
10. C0210
11. C0211
12. C0214
13. C0216
14. C1004, CC155, CD704
15. C1081
16. C1102
16.1 FS-533
16.2 FS-534/FS-534SD
17. C1103
17.1 FS-533
17.2 FS-534/FS-534SD
18. C1105
19. C1106
19.1 FS-533
19.2 FS-534/FS-534SD
20. C1109
20.1 FS-533
20.2 FS-534/FS-534SD
21. C1112
22. C1113
23. C1114
24. C1115
25. C1132
25.1 FS-533+PK-519
25.2 FS-534+PK-520/FS-534SD+PK-520
26. C1140
26.1 FS-533
26.2 FS-534/FS-534SD
27. C1141
28. C1144
29. C1145
30. C1156
31. C1182
32. C1184
33. C1195
34. C1196
35. C1197
36. C11A1
37. C11A2
38. C11E1
39. C1402
40. C2152, C2153, C2154, C2155, C2156
41. C2253, C2254
42. C2255, C2256
43. C2355
44. C2411, C2552, C2561
45. C2412, C2554, C2562
46. C2413, C2556, C2563
47. C2414, C2558, C2564
48. C2551
49. C2553
50. C2555
51. C2557
52. C2559
53. C255A
54. C255B
55. C255C
56. C2650, CC163
57. C2A11, C2A12, C2A13, C2A14
58. C2A21, C2A22, C2A23, C2A24
59. C3101, C3103
60. C3201, C3202
61. C3302
62. C3425
63. C3722, C3922
64. C3725, C3825, C3925, C392A
65. C3726, C3826, C3926
66. C3731
67. C392B
68. C4091 – C40A4, C5601, C5605, C5606, CA051 – CA053, CC151, CC152, CC15C, CC170 – CC186, CC191 –
CC216, CD211 – CD261, CD401 – CD413, CD701 – CD703, CD705, CD706, CE001, CE003 – CE305, CEEE1, CEEE3
69. C4101
70. C4501
71. C5102, C5103
72. C5351
73. C5355
74. C5360
75. C5370
76. C5501
77. C5603, C5610, C5611
78. C5604
79. C6001
80. C6002
81. C6102, C6103
82. C6104, C6105
83. C6704, C6751, CDF50, CDF70, CDFA0
84. C6752
85. C6753
86. C6754, C6755
87. C6756
88. C6901, C6902, C6903
89. C6911, C6912, C6913
90. C6F01, C6F02, C6F03, C6F04, C6F05, C6F07, C6F08, C6F09, C6F0A, C6FFDC, C6FDD
91. C8101
91.1 DF-629
91.2 DF-704
92. C8107
92.1 DF-629
92.2 DF-704
93. C8302
93.1 DF-629
93.2 DF-704
94. C8401, CC156
95. C9401, C9402
96. C9403, C9404
97. CC159, CC15A
98. CC15B
99. CC164, CD3A0
100. CC190, CD002, CD004, CD00F, CD020, CD050
101. CD010, CE002
102. CD011, CD012, CD013, CD014, CD015, CD016, CD017, CD030, CD041, CD042, CD043, CD044, CD045,
CD046, CD047, CD048, CD049, CD04A, CD04B
103. CD201, CD202, CD203, CD271
104. CD272
105. CD392
106. CDF51, CDF71, CDFA1
107. CED01
108. CEEE2

——————————–

Content PARTS GUIDE MANUAL KONICA MINOLTA INEO+ 368:
1. EXTERNAL PARTS
2. INNER COVER SECTION
3. OPERATION PANEL SECTION
4. IR COVER SECTION
5. SCANNER SECTION
6. PH UNIT
7. TONER SUPPLY SECTION
8. WASTE TONER BOX SECTION
9. ERASE LAMP SECTION
10. DV LOCK LEVER SECTION
11. TRANSFER UNIT
12. PAPER FEED SECTION
13. 1ST PAPER FEED SECTION
14. 2ND PAPER FEED SECTION
15. CASSETTE RAIL SECTION
16. PAPER SIZE DETECTION SECTION
17. 1ST CASSETTE SECTION
18. 2ND CASSETTE SECTION
19. CONVEYANCE SECTION
20. VERTICAL TRANSPORT SECTION
21. VERTICAL CONVEYANCE DOOR SECTION
22. BYPASS TRAY SECTION
23. REVERSAL UNIT
24. FUSING SECTION
25. PAPER EXIT SECTION
26. MAIN DRIVE/ PAPER FEED DRIVE SECTION
27.TONER BOTTLE DRIVE SECTION
28. FUSING DRIVE SECTION
29. HIGH VOLTAGE SECTION
30. MAIN POWER SUPPLY SECTION
31. ELECTRICAL COMPONENTS
32. WIRING
33. WIRING ACCESSORIES AND JIGS
34. ACCESSORY PARTS

——————————–

Content PARTS GUIDE MANUAL KONICA MINOLTA INEO+ 308:
1. EXTERNAL PARTS
2. INNER COVER SECTION
3. OPERATION PANEL SECTION
4. IR COVER SECTION
5. SCANNER SECTION
6. PH UNIT
7.TONER SUPPLY SECTION
8. WASTE TONER BOX SECTION
9. ERASE LAMP SECTION
10. DV LOCK LEVER SECTION
11. TRANSFER UNIT
12. PAPER FEED SECTION
13. 1ST PAPER FEED SECTION
14. 2ND PAPER FEED SECTION
15. CASSETTE RAIL SECTION
16. PAPER SIZE DETECTION SECTION
17. 1ST CASSETTE SECTION
18. 2ND CASSETTE SECTION
19. CONVEYANCE SECTION
20. VERTICAL TRANSPORT SECTION
21. VERTICAL CONVEYANCE DOOR SECTION
22. BYPASS TRAY SECTION
23. REVERSAL UNIT
24. FUSING SECTION
25. PAPER EXIT SECTION
26. MAIN DRIVE/ PAPER FEED DRIVE SECTION
27. TONER BOTTLE DRIVE SECTION
28. FUSING DRIVE SECTION
29. HIGH VOLTAGE SECTION
30. MAIN POWER SUPPLY SECTION
31. ELECTRICAL COMPONENTS
32. WIRING
33. WIRING ACCESSORIES AND JIGS
34. ACCESSORY PARTS

——————————–

Content PARTS GUIDE MANUAL KONICA MINOLTA INEO+ 258:
1. EXTERNAL PARTS
2. INNER COVER SECTION
3. OPERATION PANEL SECTION
4. IR COVER SECTION
5. SCANNER SECTION
6. PH UNIT
7. TONER SUPPLY SECTION
8. WASTE TONER BOX SECTION
9. ERASE LAMP SECTION
10. DV LOCK LEVER SECTION
11. TRANSFER UNIT
12. PAPER FEED SECTION
13. 1ST PAPER FEED SECTION
14. 2ND PAPER FEED SECTION
15. CASSETTE RAIL SECTION
16. PAPER SIZE DETECTION SECTION
17. 1ST CASSETTE SECTION
18. 2ND CASSETTE SECTION
19. CONVEYANCE SECTION
20. VERTICAL TRANSPORT SECTION
21. VERTICAL CONVEYANCE DOOR SECTION
22. BYPASS TRAY SECTION
23. REVERSAL UNIT
24. FUSING SECTION
25. PAPER EXIT SECTION
26. MAIN DRIVE/ PAPER FEED DRIVE SECTION
27. TONER BOTTLE DRIVE SECTION
28. FUSING DRIVE SECTION
29. HIGH VOLTAGE SECTION
30. MAIN POWER SUPPLY SECTION
31. ELECTRICAL COMPONENTS
32. WIRING
33. WIRING ACCESSORIES AND JIGS
34. ACCESSORY PARTS