Mimaki JV150-130 JV150-160 JV300-130 JV300-160 Service Manual and Parts List Manual

Service Manual and Parts List Manual Mimaki JV150-130 JV150-160 JV300-130 JV300-160;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Mimaki.
You can print, zoom or read any diagram, picture or page from this Service Manual and Parts List Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Mimaki JV150-130 JV150-160 JV300-130 JV300-160. You can find easily everything what do you need.
To see what contain, please read table of contents:

Content for Service Manual:
1. OPERATING PRINCIPLE
1.1 Basic Operation
1.2 Maintenance Function
1.3 Ink System
1.3.1 Configuration
1.3.2 Ink System Error Monitoring
1.3.3 Supply Cartridge Control and Selection
1.3.4 Cartridge LED Control
1.3.5 Supply Valve Control
1.3.6 Monitoring of the Amount of Remaining Ink
1.3.7 Use-up Cleaning
1.3.8 Ink Suction and Discharge Control
1.3.9 Initial Filling

2. ELECTRICAL PARTS
2.1 Block Diagram
2.1.1 Connection Diagram Inside the Main Body
2.2 Operation Explanation
2.2.1 Operation Explanation
2.3 Circuit Board Specifications
2.3.1 EPL2 Main PCB Assy
2.3.2 SL2H PCB Assy.
2.3.3 COM16 IO PCB Assy. / COM 32 IO PCB Assy.
2.3.4 AC PCB Assy
2.3.5 Color LCD PCB Assy.
2.3.6 RGB LED PCB Assy
2.3.7 Encoder PCB Assy
2.3.8 Mini Memory PCB Assy
2.3.9 Mark Sensor PCB
2.3.10 CART IO PCB Assy.
2.3.11 PD AMP PCB Assy.
2.3.12 240W42V Power Supply Assy.
2.3.13 15W5V Power Supply Assy.

3. WORKFLOW
3.1 Ink Related Parts
3.1.1 Replacement of the Head Unit
3.1.2 Replacement of the Cartridge Assy
3.1.3 Replacement of the Wiper Unit
3.1.4 Replacement of the Wiper Cleaner Assy.
3.1.5 Replacement of the Cutter Assy
3.1.6 Replacement of the Selective path Assy./Tube Pump Assy.
3.1.7 Replacement of the Cap Head Assy.
3.2 Driving Parts
3.2.1 Replacement of the X-axis Motor / X drive belt
3.2.2 Replacement of the Y-axis Motor
3.2.3 Replacement of the Y Drive Belt
3.2.4 Replacement of the Linear Encoder Scale
3.3 Electrical Parts
3.3.1 Replacement of the EPL2 Main PCB Assy

4. ADJUSTMENT ITEMS
4.1 Operation Matrix
4.2 Adjustment Function
4.2.1 AVERAGING 34 ADJUST
4.2.2 STAGGER ADJUST
4.2.3 DROP.POS
4.2.4 REPLACE COUNT
4.2.5 DEFAULT SET
4.2.6 CAPPING
4.2.7 ADJUST WIPER
4.2.8 HEAD WASH
4.2.9 MAINT. WASH
4.2.10 HEAD ID
4.2.11 HEAD VOLT ADJUST
4.2.12 SERIAL No.
4.2.13 DEALER No.
4.2.14 FEED COMP.2
4.2.15 EDGE ADJUST
4.2.16 POINTER OFFSET
4.2.17 TIME SET
4.2.18 ANGLE ADJUST
4.2.19 LAN CONFIG
4.3 Mechanical Adjustment
4.3.1 Adjustment of the Carriage Slant
4.3.2 Adjustment of the Mounting Location for the Cutter
4.3.3 Adjustment of the Station Height
4.3.4 Adjustment of the Wiper Height
4.3.5 Adjustment of the JAM Sensor Height
4.3.6 Positioning of the Encoder Sensor
4.3.7 Centering of the Roll Holder
4.3.8 Positioning of the Wiper Drive Link
4.3.9 Parallelism adjustment of the Tension Bar

5. TEST ITEMS
5.1 Test Function
5.1.1 CHECK PATTERN
5.1.2 SENSOR
5.1.3 MEMORY CHECK
5.1.4 KEYBOARD TEST
5.1.5 LCD
5.1.6 CHECK TEMP.
5.1.7 CHECK INK IC
5.1.8 CARTRIDGE VALVE
5.1.9 CARTRIDGE SENSOR
5.1.10 Maintenance Cartridge
5.1.11 AGING
5.1.12 CHECK ENCODER
5.1.13 H/W
5.1.14 Paper Sensor
5.1.15 HEATER
5.1.16 ACTION TEST
5.1.17 LED
5.1.18 SKEW CHECK
5.1.19 VOLTAGE CHECK
5.1.20 NCU
5.1.21 EVENT LOG
5.1.22 CHECK MESSAGE
5.2 Other Test

6. DISASSEMBLY AND REASSEMBLY
6.1 Covers
6.1.1 Cover Layout
6.2 Ink-related Parts
6.2.1 Damper
6.2.2 Head Unit
6.2.3 Cleaning Liquid Valve
6.2.4 Selective Path Pump Assy./Tube Pump Assy.
6.2.5 Pump Motor
6.2.6 Circulation Pump
6.2.7 Circulation Filter
6.2.8 Cap Head Assy
6.2.9 CP Absorber
6.2.10 Valve Assy
6.2.11 Cutter Unit
6.2.12 Clamp Assy.
6.2.13 Changing Joint
6.3 Drive System
6.3.1 X-axis Motor Assy / X drive belt
6.3.2 Y-axis Motor
6.3.3 Y Drive Pulley
6.3.4 Y Drive Belt
6.3.5 Linear Encoder Scale
6.3.6 Wiper Unit
6.3.7 Wiper Cleaner Assy.
6.3.8 Take-up Motor
6.3.9 AMF Unit (OPTION)
6.4 Electrical Parts
6.4.1 EPL2 Main PCB Assy
6.4.2 COM16 IO/COM32 IO PCB Assy
6.4.3 SL2H PCB Assy
6.4.4 AC PCB Assy
6.4.5 Mini Memory PCB Assy
6.4.6 CART IO PCB Assy
6.4.7 Color LCD PCB Assy.
6.4.8 Encoder PCB Assy
6.4.9 ID Contact PCB CN032 Assy
6.4.10 Absorption Fan Assy.
6.4.11 Ceiling Drying Fan Assy.
6.4.12 240W42V Power Supply Assy.
6.5 Sensors
6.5.1 Sensor Layout
6.5.2 Paper Sensor
6.5.3 NCU Assy. (Nozzle Missing Detector)
6.5.4 Detector Assy, I/C, Y
6.5.5 Take-up Photo Sensor (T bar angle detect sensor)
6.5.6 Take-up Sensor

7. TROUBLESHOOTING
7.1 Details on Errors and Malfunctions
7.1.1 Concerning Errors and Malfunctions
7.1.2 List of Error Messages
7.1.3 List of Warning Messages
7.1.4 List of SYSTEM HALT
7.2 Detailed Methods of Coping with the Malfunctions
7.2.1 Determining short circuit of COM16 IO PCB/COM32 IO PCB
7.2.2 Checking Damage of the Print Heads

8. OPERATION FLOW
8.1 Basic Operation
8.1.1 Start
8.2 Print Mode
8.2.1 LOCAL / REMOTE
8.2.2 SETUP
8.2.3 MAINTENANCE
8.2.4 MACHINE SETUP
8.3 Common Setting
8.3.1 INFORMATION
8.4 Service Mode
8.4.1 #ADJUST
8.4.2 #TEST

—————

Content for Parts List Manual:
0. RECOMMENDED PARTS LIST
1. COVER ASSY. -1/3
2. KEYBOARD ASSY.
3. FRAME ASSY. -1/3
4. CLAMP ASSY. -1/2
5. X-DRIVE ASSY.
6. Y-DRIVE ASSY.
7. Y-BAR ASSY.
8. BEAR ASSY.
9. STATION ASSY.
10. CAP BASE ASSY.
11. WIPER ASSY.
12. NOZZLE DETECT ASSY.
13. WASTE INK PUMP ASSY.
14. CARTRIDGE ASSY. -1/2
15. SUPPLY PUMP ASSY. -1/2
16. WASH CARTRIDGE ASSY. -1/2
17. CARRIAGE ASSY. -1/3
18. PLATEN ASSY. -1/3
19. ELECTRICAL BOX ASSY. -1/2
20. LEG ASSY.
21. FEEDING DEVICE ASSY.
22. TAKE-UP DEVICE ASSY.
23. AMF ASSY. -1/2(OPTION)
24. PACKING ASSY. -1/2
25. BLOCK DIAGRAM

& Installation Guide