Oki C330 Oki C530 Service Manual and Parts List Manual

Service Manual and Parts List Manual Oki C330 Oki C530;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Oki.
You can print, zoom or read any diagram, picture or page from this Service Manual and Parts List Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Oki C330 Oki C530. You can find easily everything what do you need.
To see what contain, please read table of contents:

1. CONFIGURATION
1.1 System configuration
1.2 Printer configuration
1.3 Optional items
1.4 Specifications
1.5 Interface specifications
1.5.1 USB interface specifications
1.5.1.1 USB interface overview
1.5.1.2 USB interface connector and cable
1.5.1.3 USB interface signals
1.5.2 Network interface specifications
1.5.2.1 Network interface overview
1.5.2.2 Network interface connector and cable
1.5.2.3 Network interface signals

2. DESCRIPTION OF OPERATION
2.1 Electrophotographic process mechanism
2.2 Printing process

3.INSTALLATION
3.1 Cautions, and do’s and don’ts
3.2 Unpacking procedure
3.3. Printer installation instructions
3.4 List of components and accessories
3.5 Assembly procedure
3.5.1 Assembly of the printer main unit
3.5.2 Connection of the power cable
3.5.3 Installation and recognition confirmation of an option
3.6 Printing of MenuMap
3.7 Connection methods
3.8 Checking of paper used by the user

4.REPLACEMENT OF PARTS
4.1 Notes on replacement of parts
4.2 Part replacement procedure
4.2.1 Belt unit
4.2.2 Fuser unit
4.2.3 Left side cover
4.2.4 Right side cover
4.2.5 Face-up tray
4.2.6 Rear cover
4.2.7 LED assembly. and LED assembly springs
4.2.8 Image drum fan and ZHJ board
4.2.9 CU/PU PCB and low-voltage power supply
4.2.10 Top cover assembly
4.2.11 Top cover and LED head cable assembly
4.2.12 Operator panel assembly
4.2.13 Board IBB and LCD
4.2.14 MPT assembly
4.2.15 Front fan, hopping motor, rear fan, image drum motor and cover-open switch
4.2.16 High-voltage power supply board
4.2.17 Guide-ejection assembly, fuser connector assembly and color-registration assembly
4.2.18 Frame-MPT assembly and feeder assembly
4.2.19 Side-L assembly, side-R assembly and base assembly?
4.2.20 Feed rollers
4.3 Locations to lubricate

5. MAINTENANCE MENUS
5.1 System Maintenance menu (for maintenance personnel)
5.2 Maintenance Utility
5.3 User maintenance menu functions
5.3.1 Maintenance menu (for end-users)
5.3.2 Self-diagnostic mode
5.3.3 Various types of printing on stand-alone basis
5.3.4 Button functions at power-on
5.4 Setup after part replacement
5.4.1 Notes on CU/PU board replacement
5.5 Manual density adjustment operation
5.6 Printer ADMIN MENU

6. PERIODIC MAINTENANCE
6.1 Cleaning
6.2 LED lens array cleaning
6.3 Pick-up roller cleaning
6.4 Pinter internal cleaning

7.TROUBLESHOOTING
7.1 Before troubleshooting
7.2 Points to check before dealing with image troubles
7.3 Precautions for dealing with image troubles
7.4 Preparation for troubleshooting
7.5 Troubleshooting procedure
7.5.1 LCD messages list
7.5.2 Preparation for troubleshooting
7.5.3 Troubleshooting of image problems
7.5.4 Network troubleshooting
7.5.4.1 Connection errors occur by use of a Web browser (C330dn/C530dn only)
7.5.4.1.1 Has a certificate been created?
7.5.4.1.2 Is the SSL/TLS setting set to ON?
7.5.4.1.3 Check the version number of the Web browser
7.5.4.1.4 Check the encryption strength of the printer
7.5.4.2 Print operation is not possible (C330dn/C530dn only)
7.5.4.2.1 Check the OS (Operating System)
7.5.4.2.2 Has a printer been created?
7.5.4.2.3 Is the IPP setting set to Enable?
7.5.4.3 A certificate cannot be created. (C330dn/C530dn only)
7.5.4.3.1 Not all the required entry fields are filled in
7.5.4.3.2 The printer is printing
7.5.4.4 A certificate cannot be installed. (C330dn/C530dn only)
7.5.4.4.1 The printer IP address has been changed
7.5.4.4.2 The network card has been initialized
7.5.4.4.3 A CSR has been deleted
7.5.4.4.4 Install an intermediate Certificate
7.5.4.5 Other questions (C330dn/C530dn only)
7.5.4.5.1 Time required for creation of a certificate
7.5.4.5.2 Communication time when the encryption function is enabled
7.5.4.5.3 Can encrypted printing be performed without IPP?
7.5.4.5.4 What will happen if SSL/TLS is set to OFF after a certificate is created (or installed)?
7.5.4.5.5 How to change the port number
7.5.4.5.6 The error message -The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority’ is displayed
7.5.4.5.7 The error message -Name of security certificate is invalid or does not match the site name’ is displayed
7.5.4.6 Restrictions when using Internet Explore 7 (C330dn/C530dn only)
7.5.4.6.1 Warning indication when SSL is enabled for self-signed certificates
7.6 Fuse check

8. CONNECTION DIAGRAMS
8.1 Resistance value checking
8.2 Layout of parts
8.3 Firmware revision numbers
8.3.1 ROM control numbers
8.3.2 Checking and indication of the revision number
8.3.3 Stamp of maintenance board indication

Number pages Maintenance Manual: 221.
Number pages Parts List: 28.