Mutoh ValueJet 1304 VJ1304 Service Manual and Parts List Manual

Service Manual and Parts List Manual Mutoh ValueJet 1304 VJ1304;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Mutoh ValueJet.
You can print, zoom or read any diagram, picture or page from this Service Manual and Parts List Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Mutoh ValueJet 1304 VJ1304. You can find easily everything what do you need.
To see what contain, please read table of contents:

1. SAFETY INSTRUCTIONS
1.1 Introduction
1.2 Warnings, Cautions and Notes
1.3 Important Safety Instructions
1.4 Warning Labels
1.4.1 Handling the Warning Labels
1.4.2 Locations and Types of Warning Labels
1.5 Operation Labels
1.5.1 Handling the Operation Labels
1.5.2 Locations and Types of Operation Labels

2. PRODUCT OVERVIEW
2.1 Introduction
2.2 Features
2.3 Part Names and Functions
2.3.1 Front Section
2.3.2 Rear Section
2.3.3 Winding unit
2.3.4 Operation Panel
2.4 Printer Status
2.4.1 Normal
2.4.2 Setup Menu
2.4.3 Self-Diagnosis Function
2.4.4 Maintenance Mode
2.4.5 Selecting Panel Language and Panel Temperature

3. SPECIFICATIONS
3.1 Introduction
3.2 Product Specifications
3.3 Interface Specifications
3.3.1 Network Interface Specifications
3.4 Options/Supplies List
3.4.1 Options
3.4.2 Supplies
3.5 Choosing a Place for the Printer

4. PARTS REPLACEMENT
4.1 Introduction
4.2 Removal of Covers
4.2.1 Removing R Side Cover
4.2.2 Removing Operation Panel Unit
4.2.3 Removing L Side Cover
4.2.4 Removing Ink Holder (I/H) Cover
4.2.5 Removing Front Cover
4.2.6 Removing Top Cover
4.2.7 Removing Media Guide F
4.2.8 Removing Media Guide R2
4.2.9 Removing Scroller Receiver (L, R)
4.2.10 Assembling of Scroller Receiver L and R
4.3 Replacement of Board Base Section Components
4.3.1 Removing Connector Panel and Cooling Fan
4.3.2 Removing Main Board Bracket
4.3.3 Replacing Main Board Assembly
4.3.4 Replacing HEATER CONT board assembly
4.3.5 Replacing HEATER RELAY board assembly
4.3.6 Replacing Power Board Assembly
4.3.7 Replacing Fuse
4.3.8 Replacing Inlet Assembly
4.4 Replacement of PF Driving Section Components
4.4.1 Replacing PF Motor Assembly
4.4.2 Replacing PF_ENC Assembly
4.4.3 Replacing PF_ENC Scale
4.4.4 Replacing Heater and Thermistor Assembly
4.5 Replacement of CR Driving Section Components
4.5.1 CR Motor Assembly
4.5.2 Replacing CR Origin Point Sensor
4.5.3 Replacing Lever Sensor
4.5.4 Replacing T Fence
4.5.5 Replacing CR Driven Pulley and CR belt
4.5.6 Replacing Pressure Arm Assembly
4.6 Replacement of Head Section Components
4.6.1 Replacing Print Head
4.6.2 Replacing Cutter Holder Assembly
4.7 Replacement of Maintenance Section Components
4.7.1 Removing Maintenance Base Assembly
4.7.2 Replacing Maintenance Assembly
4.7.3 Replacing Cleaner Head (Cleaning Wiper)
4.8 Replacement of Ink Supply Section Components
4.8.1 Replacing Ink Holder (I/H) Assembly
4.8.2 Replacing Ink Sensor Assembly
4.8.3 Replacing Cover Sensor Assembly
4.8.4 Replacing Heater Junction Board
4.9 Replacement of Frame Section Components
4.9.1 Replacing Suction Fan Assembly
4.9.2 Replacing P_REAR Sensor Assembly
4.10 Replacement of Cable Guide Section Components
4.10.1 Replacing CR Board Assembly
4.10.2 Replacing Ink Tube
4.10.3 Replacing CR Tape Wire
4.11 Replacing Accessory Unit
4.11.1 Replacing Level Switch (Waste Fluid)
4.12 Replacing Take Up Unit
4.12.1 Removing Tension Arm
4.12.2 Removing Take Up Unit Fixing Plate
4.12.3 Removing Take Up Unit Cover
4.12.4 Replacing Scroller
4.12.5 Replacing VJ Take Up Unit CNT Board Assembly
4.12.6 Replacing CR_HP Sensor, Lever Sensor
4.12.7 Replacing Peripheral Devices of VJ Take Up Unit Motor Assembly

5. SELF-DIAGNOSIS MODE
5.1 Introduction
5.2 Preparation
5.2.1 Preparations on Machine
5.2.2 Starting Up
5.3 Operations in Self-Diagnosis Mode
5.3.1 Operating Self-Diagnosis Mode
5.3.2 Diagnosis Items in Self-Diagnosis Menu
5.4 Platen Adjustment Menu
5.5 Inspection Menu
5.5.1 Memory Size Menu
5.5.2 Version Menu
5.5.3 Operation Panel Menu
5.5.4 Sensor Menu
5.5.5 Encoder Menu
5.5.6 Fan Menu
5.5.7 History Menu
5.5.8 Head Waveform Menu
5.6 Ink Charging Menu
5.7 Adjustment Menu
5.7.1 CR Return Position Adjustment Menu
5.7.2 Head Nozzle Check Menu
5.7.3 Skew Check Menu
5.7.4 Head Slant Check Menu
5.7.5 Voltage Adjustment
5.7.6 Uni-D / Bi-D Low and High Adjustment
5.7.7 Side Margin Adjustment Menu
5.7.8 Test Printing Menu
5.7.9 HeadWash Menu
5.7.10 Software Counter Initialization Menu
5.7.11 Feed Pitch Check Menu
5.7.12 Solid Print Menu
5.8 Cleaning Menu
5.9 Sample Printing Menu
5.9.1 Adjustment pattern ALL
5.9.2 Parameter ALL
5.9.3 Error history
5.9.4 Dot pattern
5.10 Time Check
5.11 Parameter Menu
5.11.1 Parameter Initialization Menu
5.11.2 Parameter Update Menu
5.12 Servo Setting
5.13 Endurance Running Menu
5.13.1 CR Motor Endurance Menu
5.13.2 PF Motor Endurance Menu
5.13.3 Pump Endurance Menu
5.13.4 Print Head Endurance (Nozzle Print) Menu
5.13.5 General Endurance Menu
5.13.6 Endurance Running Check Menu
5.14 Media Feed Menu
5.15 ExControl Menu
5.15.1 Version
5.15.2 Sensor
5.15.3 Heater
5.15.4 History
5.16 PaperInitial Menu

6. MAINTENANCE MODE 2
6.1 Introduction
6.2 Operations in Maintenance Mode 2
6.2.1 Starting Up the Maintenance Mode 2
6.2.2 Operating Maintenance Mode 2
6.3 Maintenance Menu
6.3.1 Counter Display Menu
6.3.2 Counter Initialization Menu
6.3.3 Counter Print Menu
6.3.4 Media Feed Menu

7. ADJUSTMENT
7.1 Introduction
7.2 Adjustment Item
7.3 Working with MUTOH Maintenance Engineer Assistant
7.3.1 Parameter Backup
7.3.2 Jigs and Tools
7.3.3 Required Environment
7.3.4 Receiving Parameters
7.3.5 Firmware Installation
7.3.6 Sending Parameters
7.3.7 Sub Controller Installation
7.3.8 Date & Time Setting
7.4 Working with MUTOH Service Assistance
7.4.1 Parameter Backup
7.4.2 Jigs and Tools
7.4.3 Required Environment
7.4.4 Date & Time Setting
7.4.5 Editing Media Type
7.4.6 Downloading and Saving Error Log
7.4.7 Updating Main Firmware
7.4.8 Updating the Firmware of Heater Controller
7.4.9 Receiving Parameters
7.4.10 Sending Parameters
7.4.11 Using Diagnostic Mode
7.4.12 Downloading Individual Code
7.4.13 Uploading Authorization Code
7.4.14 Referring Setup List Information
7.4.15 Referring Adjust Parameters
7.4.16 Version Information
7.4.17 Quitting Application
7.5 PF Speed Reduction Belt Tension Adjustment
7.5.1 Jigs and Tools
7.5.2 Adjustment Procedure
7.6 PF Encoder Assembly Position Adjustment
7.6.1 Adjustment Procedure
7.7 CR Belt Tension Adjustment
7.8 Head Alignment (Horizontal Height)
7.9 Head Alignment (Vertical Slant)
7.10 Cutter Holder Height Adjustment
7.10.1 Jigs and Tools
7.10.2 Adjustment Procedure
7.11 PG Height Adjustment
7.11.1 Jigs and Tools
7.11.2 Adjustment Procedure
7.12 Media Sensor Sensitivity Adjustment
7.12.1 P_EDGE Sensor Sensitivity Adjustment
7.12.2 P_REAR Sensor Adjustment

8. MAINTENANCE
8.1 Introduction
8.2 Periodical Services
8.2.1 Periodical Replacement Parts
8.2.2 Parts need to be checked or replaced
8.3 Part Life Information
8.4 Lubrication/Bonding
8.5 Transportation of Printer

9. TROUBLESHOOTING
9.1 Introduction
9.2 Troubleshooting with Error Messages
9.2.1 Operation Status
9.2.2 Errors with Message
9.2.3 Errors Requiring Reboot
9.2.4 Error Messages During File Transmission
9.3 Troubleshooting Without Error Messages
9.3.1 Initial Operation Problems
9.3.2 Media Feed Problems
9.3.3 Printing Problems
9.3.4 Noise Problems
9.3.5 Online Function Problems
9.3.6 Other Problems
9.3.7 Troubleshooting For A Dedicated Network Software

10. APPENDIX
10.1 Introduction
10.2 Wiring Diagram
10.3 Maintenance Part List
10.4 Jigs and Tools
10.4.1 Required Tools
10.5 Operation Panel Messages (Bilingual List)
10.6 Exploded View

Number of pages: 438.